| 1 | 1 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift. | | 15 | Each |
|---|
| 2 | 2 | Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire\netc. complete as per directions of Engineer-in-Charge as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift.\n | | 352 | Sqm. |
|---|
| 3 | 3 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift. | | 704 | Sqm. |
|---|
| 4 | 4 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift. | | 96.64 | Kg |
|---|
| 5 | 5 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :\nFor shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron) as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift.\n | | 150.08 | Kg |
|---|
| 6 | 6 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift. | | 13.5 | Sqm. |
|---|
| 7 | 7 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift. | | 13.5 | Sqm. |
|---|
| 8 | 8 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift. | | 15 | Each |
|---|
| 9 | 9 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift. | | 439 | Sqm. |
|---|
| 10 | 10 | Designing, providing, installing and fixing factory finished custom designed cold form Light Gauge Steel Framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 1.15mm thick steel sheet as per design requirements. The steel sheet shall be galvanized (AZ-150gms Aluminium Zinc Alloy coated steel having minimum yield strength 300-550 Mpa) conforming to AISI specifications and IBC 2009 for cold formed steel framing and construction and also as per IS: 875-1987, ISO 8001984 and IS:801- 1975. The wind load shall be as per provisions of IS 875 (part -III). LGSFS frame shall be designed as per IS: 801 using commercially available software such as Frame CAD Pro-11.7/ STAAD PRO-V8i/ArchitekV2.5.16/ Revit architecture-2011 or equivalent. Proper usage of Connection Accessories like Heavy Duty Tension Ties, Light Duty Hold-ons, Twist Straps (to connect truss with wall frames), Strong Tie, Tie Rod, H-Brackets, Boxing Sections, L-Shaped Angles for better structural stability. The framing section shall be cold form C-type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple/slot at required locations as per approved drawings. The slots will be along centre line of webs and shall be spaced minimum 250mm away from both ends of the member. The frame can be supplied in panelized or knock down condition in specific dimensions and fastened with screws extending through the steel beyond by minimum of three exposed threads. All self drilling tapping screws for joining the members shall have a Type II coating in accordance with ASTM B633(13) or equivalent corrosion protection of gauge 10 & 12, TPI 16 & 8 of length 20mm. The frames shall be fixed to RCC slab or Tie beam over Neoprene rubber using self expanding carbon steel anchor bolt of dia as per approved drawings. design subject to minimum 12mm diameter and 121mm length conforming to AISI 304 and 316 at 500mm c/c with minimum embedment of 100mm in RCC (RCC to be paid separately) and located not more than 300mm from corners or termination of bottom tracks complete in all respects. The item also includes the submission of stability reports duly examined and issued by any NIT/IIT. The rate includes the concept design, detailed design, fabrication of sections, transportation, installation and all required fixing arrangement at site as described above. as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift. | | 3590.4 | Kg |
|---|
| 11 | 11 | Providing and fixing internal wall panels on Light gauge steel frame work with 12.5mm thick gypsum plaster board conforming IS 2095:2011 fixed on 8mm thick fiber cement board conforming to IS 14862:2000 of category III type B (High pressure steam cured) as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make, Screws shall be of counter sunk rib head of 1.60 mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. Proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately) as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift. | | 787.21 | Sqm. |
|---|
| 12 | 12 | Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy duty fiber cement board (High pressure steam cured) conforming to IS 14862:2000 of category III type B as per standard sizes fixed with self-drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift. | | 33 | Sqm. |
|---|
| 13 | 13 | Providing and Fixing ROLLER BLINDS & complete with all component, including drilling holes in the wood work/RCC & installation at site. The Roller Blinds will have following specifications:Top channel extruded from Non rusting Aluminum alloy with 1.25 mm thickness, with anodization for long life. The Channel is designed with support beam to keep it straight and shall have a pocket for holding the fabrics in position. Available in 32 & 38 mm diameters for small and big blind respectively. Bottom Channel of Roller Blinds is again none rusting Aluminum powder coated with 1.50 mm thickness and 21 mm diameter. The fabric is enclosed in suitably created pocket along with tube. The channel shall be closed from sides with the end caps to give a neat look. Matching \ncolors of bottom channel available to match with the fabrics. The tilt chain is made of unbreakable ABS plastic, 1.50 mm polyester cord with 4.50 mm balls. The blind can be stopped of desired position with help of stop lock. This operating mechanism is made of High strength ABS plastic, consists of an ultra smooth gear with spring booster. High carbon steel spring to transmit motion from driver to driven members. The mechanism shall be operating with the use of tilt chain. The Brackets are made of steel with powder coating to give smooth finish. Brackets shall be accommodated overhead or on side mounting with clutch assembly on either end of the blind.Fabric Specifications: Proton BlackoutComposition of Fab.100 % PolyesterVisibility Zero Light Transparent Zero Available Width 2.60 Mtrs Fabric Thickness 0.45 MM (+-0.05)Weight325 g/m2 (+-5%)Tearing Strength Very HighHanging Properties Excellent Cleaning Conditionally cleanable with damp cloth as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift.\n | | 236.86 | Sqm. |
|---|
| 14 | 14 | Providing and fixing aluminium tower bolt. ISI marked, power coated (coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 150 X 10 mm as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift. | | 15 | Each |
|---|
| 15 | 15 | Providing and fixing aluminium handles, ISI marked, power coated (coating not less than grade AC 10 as pern IS:1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 200 mm as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift. | | 30 | Each |
|---|
| 16 | 16 | Wiring for light point/ fan point/ exhaust fan point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 38 | No. |
|---|
| 17 | 17 | Supplying and drawing 2x1.5 sq mm of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 150 | Meter |
|---|
| 18 | 18 | Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift. | | 190 | Meter |
|---|
| 19 | 19 | Supplying and fixing 15/16 A switch modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift. | | 9 | No. |
|---|
| 20 | 20 | Supplying and fixing 3 pin 5/6 A socket outlet modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 27 | No. |
|---|
| 21 | 21 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 12 | No. |
|---|
| 22 | 22 | Supplying and fixing 1 or 2 Module Modular base & cover plate on existing modular metal boxes etc. as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 9 | No. |
|---|
| 23 | 23 | Supplying and fixing 3 Module Modular base & cover plate on existing modular metal boxes etc. as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 9 | No. |
|---|
| 24 | 24 | Supplying and fixing 4 Module Modular base & cover plate on existing modular metal boxes etc. as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 9 | No. |
|---|
| 25 | 25 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 26 | No. |
|---|
| 26 | 26 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per entire satisfaction and direction of Engineer -in-charge including carriage of material in all lead and lift. | | 58 | No. |
|---|
| 27 | 27 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs /Ceiling during laying, including painting the exposed portion of loop, all as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 26 | No. |
|---|
| 28 | 28 | Supplying and drawing of 1 Run of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 580 | Meter |
|---|
| 29 | 29 | Supplying and fixing 6 way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. (But without MCB/RCCB/Isolator) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 1 | No. |
|---|
| 30 | 30 | Supplying and fixing 12 way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. (But without MCB/RCCB/Isolator) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 1 | No. |
|---|
| 31 | 31 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of Single pole, in the existing MCB DB complete with connections, testing and commissioning etc. as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 14 | No. |
|---|
| 32 | 32 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 2 | No. |
|---|
| 33 | 33 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of up to 35 Sq. mm size on cable tray as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 110 | Meter |
|---|
| 34 | 34 | Supplying of 3 Core 10 Sq. mm of 1.1 KV Aluminium conductor XLPE Insulated,PVC extruded inner-sheathed, round wired GI strip armoured, overall PVC outer-sheathed (as per IS 7098 Part 1) with latest amendments as required as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 110 | Meter |
|---|
| 35 | 35 | Supplying and fixing RJ45 modular socket on the existing modular plate & switch box including connections but excluding modular plate etc. as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 9 | No. |
|---|
| 36 | 36 | Supplying and fixing 4 Modue PVC box to be fixed in the existing Wall Trunking as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 9 | No. |
|---|
| 37 | 37 | Supplying and fixing 3 Modue PVC box to be fixed in the existing Wall Trunking as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 9 | No. |
|---|
| 38 | 38 | Supplying and fixing 2 Modue PVC box to be fixed in the existing Wall Trunking as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 9 | No. |
|---|
| 39 | 39 | Supplying of fan rod 18\" as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 26 | No. |
|---|
| 40 | 40 | Dismantling of ceiling fan including cleaning of surface with Cotton Cloth and replacing the damaged rubber reel, nuts and bolts with washers and safety pins refixing the same as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 26 | No. |
|---|
| 41 | 41 | Dismantling and Cleaning of Surface Down Lighter with Cotton Cloth with full precaution taken as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all leads and lifts. | | 58 | No. |
|---|
