Construction Of New Medical College Centering Mmch And Kalapahar Campus Along With 800 Bedded General Hospital At Mmch Campus In Guwahati . , Guwahati-Assam

TDR : 26636733

Tender Notice
Corrigendum Details
BOQ

Expired

Guwahati , Assam

Tender Brief : Corrigendum : Construction Of New Medical College Centering Mmch And Kalapahar Campus Along With 800 Bedded General Hospital At Mmch Campus In Guwahati .

Document Fees
₹ 12500 /-

EMD
₹ 132040000.0 /-

Tender Value
₹ 660.20 Crore /-

Submission Date
10-02-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	09-02-2021	Revised Annexure-I	Technical Bid	10-02-2021
2	07-02-2021	Corrigendum Cum Extension	Technical Bid	10-02-2021
3	04-02-2021	Corrigendum	Technical Bid	08-02-2021
4	22-01-2021	Notice	BOQ	08-02-2021
5	18-01-2021	Drawing-07	Other	08-02-2021

Name of Work: Construction of New Medical College Centering MMCH and Kalapahar Campus along with 800 Bedded General Hospital at MMCH Campus in Guwahati.
	Sl.No.	Item Description	Item Code / Make	Quantity	Units
1	1	CIVIL WORK\nSurface dressing of ground including removing vegetation and/ or undulation of ground not exceeding 150mm deep and disposal of rubbish outside the periphery and lift up to 1800mm in all kinds of soil.	item1	64742	SQM.
2	2	Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.\nUp to a depth of 2.00 M below the existing ground level.\nIn ordinary soil	item2	198717	CUM.
3	3	Extra over item above for each subsequent 1 m depth or part thereof beyond the initial depth of 2m	item3	1.17904e+06	CUM.
4	4	Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete as directed and specified (measurement to be taken in the face area timbered)\n(a) Upto a depth of 1.5m	item4	32235	CUM.
5	5	Extra over item above for each subsequent 1.5 m depth beyond the initial depth of 1.5m	item5	193410	CUM.
6	6	Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.\n(c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.	item6	10313	CUM.
7	7	Extra cost for lifting of sand for filling of sunk floor for each subsequent floors above the ground floor as directed and specified.	item7	247	CUM.
8	8	Pre construction anti - termite treatment in the back fill in immediate contact with the foundation structure after completion, column, wall etc. to a depth of 450mm and width 300mm (when required refill in 200mm thick layers) applying the emulsion @ 5 (five) litres per square meter towards the concrete and masonry walls so as to ensure earth in contact with the structure well treated - with chemical (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.\na) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.	item8	25390	SQM.
9	9	Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.\na) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.	item9	24256	SQM.
10	10	Pre construction anti - termite treatment by applying in the junction of walls, column with the floor before laying floor and after operation of item no. 26.1.3 above making a channel 30mmx30mm all over the walls and making rod holes @ 150mm apart up to ground level below and applying emulsion @ 11 litres per square meter of vertical plinth wall surface inside the building so as to soak the soil with the emulsion up to the ground level and refill the holes and channel with the original materials obtained in making channels (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.\na) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.	item10	4668	SQM.
11	11	Pre construction anti - termite treatment by applying the soil along the external perimeter of the building (after construction completed) to a distance close to the plinth wall as specified and as directed by the deptt. up to a depth of 300mm making rod holes along the line @ 150mm apart to a depth of 300mm and applying emulsion @ 4.5 litres per running meter ensure moistening of the soil with emulsion (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.\na) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.	item11	4417	SQM.
12	12	Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified.\n(a) Within Guwahati city only	item12	129694	CUM.
13	13	Extra lead per km truck carriage for sand gravel beyond the initial lead of 8 km.	item13	129694	CUM.
14	14	Plain cement concrete works with coarse aggregate of sizes 13 mm to 32 mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, curing complete (Shuttering where necessary shall be measured and paid saperately).\nIn prop 1 cement :4 Sand :8 coarse aggreget by volume	item14	6770	CUM.
15	15	Plain cement concrete works with coarse aggregate of sizes 13 mm to 32 mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, curing complete (Shuttering where necessary shall be measured and paid saperately).\nIn prop 1 cement :3 Sand :6 coarse aggregete by volume	item15	4050	CUM.
16	16	Plain cement concrete works with coarse aggregate of sizes 13 mm to 32 mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, curing complete (Shuttering where necessary shall be measured and paid saperately).\nIn prop 1 cement :5 Sand :10 coarse aggregete by volume	item16	1560	CUM.
17	17	Plain cement concrete floor base in prop 1:3:6 laid in alternate bays as specified with coarse agg. of size 13 mm to 32 mm including dewatering if necessary, and curing etc. complete.\n100 mm thick	item17	9058	SQM.
18	18	Providing plinth protection 50mm thick to cement concrete 1 : 3 : 6 with coarse agg.of 20mm nominal size including finishing the surface with 10mm thick cement plaster in proportion 1:3 with a floating coat of neat cement finished.	item18	3658	SQM.
19	19	Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code, for reinforced cement concrete works in piles including straightening, cleaning, cutting and bending to proper shapes and length as per specifications and drawings. The rings should be welded with vertical reinforcements as per specified IS codes of practice. (Inclusive of lap length, hook, chair, bend, anchor...etc)\nTMT bar made of Primary producer (From Primary producer)	item19	17300	Qtl
20	20	Providing cast in-situ machine driven reinforced cement concrete piles of required bore-diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings including using of Admixture/ Bentonite solution. (Reinforcement to be measured and paid seperately)\nUNIFORM PILE,\nConcrete Grade M25\nPile dia 500 mm	item20	31353	R.m
21	21	Providing cast in-situ machine driven reinforced cement concrete piles of required bore-diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings including using of Admixture/ Bentonite solution. (Reinforcement to be measured and paid seperately)\nUNIFORM PILE,\nConcrete Grade M25\nPile dia 600 mm	item21	83975	R.m
22	22	Empty boring for specified diameter piles from ground level to cut-off level. f) Pile Dia. 500 mm	item22	1308	R.m
23	23	Empty boring for specified diameter piles from ground level to cut-off level. h) Pile Dia. 600 mm	item23	9527	R.m
24	24	Routine test for test loading to 1.5 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test safe load capacity from 21 tonnes to 25 tonnes	item24	213	Ton
25	25	Initial test for test loading to 2.5 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test.Safe load capacity from 21 tonnes to 25 tonnes	item25	502	Ton
26	26	Demolishing RCC / PCC pile head of different diameters carefully without disturbing the remaining portion of the pile including opening out of the pile head to be demolished by excavating the earth upto required depth and clearing the debris as directed.	item26	1334	CUM.
27	27	Providing form work of ordinary timber planking so as to give rough finish including centering , shuttering, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0m & removal of the same for in-situ reinforced concrete and plain concrete work in:\nFoundations, footings, bases of columns, pile cap, raft and mass concrete work etc.\nUsing 25 mm thick plank	item27	22371	SQM.
28	28	Vertical surfaces such as walls (any thickness), parapet walls, partition, walls of septic tank, inspection pit and the like including attached pilasters, butresses, plinth and string courses.\nUsing 25 mm thick plank	item28	56935	SQM.
29	29	Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above	item29	102159	SQM.
30	30	Staircase with sloping or stepped or stepped soffits including riser and stringers but excluding landing. Using 38 mm thick plank.\n	item30	15543	SQM.
31	31	Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above	item31	70058	SQM.
32	32	Extra for each subsequent 1.0 M height or part there of beyond the initial height of 4.0 M as mentioned in above item	item32	22284	SQM.
33	33	Providing form work of ordinary timber planking and removal of the same in edge of slab and breaks in floors and walls etc. of in situ reinforced concrete work upto first floor level.\nThickness not exceeding 200 mm - Gr. Floor to Terrace	item33	29000	RM.
34	34	Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above	item34	125132	RM.
35	35	Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0 M and removal of the same of in situ reinforced concrete and plain concrete work in:\nColumns. Pillars, posts and strut of square / rectangular / polygonal in plan or any shape like Tee / L etc., having plane vertical face	item35	75830	SQM.
36	36	Extra for each subsequent floor or part thereof above the first floor level as mentioned in item above	item36	269223	SQM.
37	37	Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0 M and removal of the same of in situ reinforced concrete and plain concrete work in:\nSides and soffits of beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal tiles. For depth not exceeding 1.0M	item37	85139	SQM.
38	38	Extra for each subsequent floor or part thereof above the First Floor level as mentioned in above item\n	item38	277572	SQM.
39	39	Providing formwork using 2mm pressed bend shuttering plate of mild sheet and tubular telescopic steel props including centering, shuttering, strutting and propping etc. complete and removal of the same for in situ reinforced concrete and plain concrete work in:\nFlat Surfaces such as soffits of suspended floors, roofs, landings and the like.	item39	187284	SQM.
40	40	Extra for each subsequent floor or part there of as mentioned in above item above the First Floor level\n	item40	546917	SQM.
41	41	Supplying, fitting and fixing in position reinforcement bars confirming to relevant I.S. Code for R.C.C. work/ R.B. walling including straigtening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level.)\nFrom primary Producer: TATA/ SAIL/ Jindal Steel/ Shyam Steel/ RINL\nTMT bars (Fe 500 D)	item41	157604	QTL.
42	42	Extra over item for each subsequent floor or part thereof above first floor level.	item42	482575	QTL.
43	43	Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately).\nUsing Batching Plant/ RMC/ Truck mounted batching plant including Transit Mixer and Concerete Pump.\n(A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.\nUsing admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.\nC) M25 grade concrete	item43	16224	CUM.
44	44	C) M40 grade concrete	item44	15585	CUM.
45	45	B) M20grade concrete	item45	9271	CUM.
46	46	A) M15 grade concrete	item46	6953	CUM.
47	47	Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately).\nUsing Batching Plant/ RMC/ Truck mounted batching plant including Transit Mixer and Concerete Pump.\n(B) In super structure from plinth level up to 1st floor level.\nii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.\nUsing admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.\nc) M25 grade concrete	item47	17590	CUM.
48	48	C) M40 grade concrete	item48	15393	CUM.
49	49	B) M20grade concrete	item49	16493	CUM.
50	50	A) M15 grade concrete	item50	5498	CUM.
51	51	Extra over item above for each subsquent floor or part thereof above 1st floor level.	item51	204543	CUM.
52	52	Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed.\nIn Sub-structure upto plinth level including dewatering if necessary\nIn proportion 1:6	item52	2900	CUM.
53	53	Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed.\nIn super structure above plinth level upto 1st floor level\nIn proportion 1:6 (Gr. Floor To Terace Floor)	item53	15289	CUM.
54	54	Extra over item above for brick work in each subsquent floor or part thereof above 1st floor level.	item54	88971	CUM.
55	55	112 mm thick reiforced brick wall in prop 1:5 reinforced with two lines of M.S. rod/ Tor Steel as specified embeded in 38 mm thick concrete course in prop 1:2:4 with coarse agg. 12 mm down at every fourth courses embeded with protruding rod in column including curing etc. complete as directed (M.S. rod/ Tor steel shall be measured and paid separately) in super structure up to 1st floor level.	item55	55210	SQM.
56	56	Extra for brick walling for each subsquent floor or part thereof above 1st floor level. 112 mm thick brick/ R.B. wall	item56	244041	SQM.
57	57	Light Weight Autoclaved Aerated concrete Block work using Grade-I AAC block of required Size and thickness of compressive strength 40Kg/cm2 having dry density 550 to 650 Kg /Cum conforming to IS-2185 Pt-3 or pt-4 in cement mortar of prop 1:4 / adhesive of approved manufacturer including racking out joints and curing complete as specified & directed. (protruding rod is to be provided at every 3 course interval and will be measured and paid separately)\n(II) In superstructure above plinth level up to 1st floor level.\n(a) For 225mm thick wall	item57	109736	SQM.
58	58	Extra for AAC block walling for each subsequent floor or part thereof above the 1st floor level to Roof\n(i) 225mm thick wall	item58	185142	SQM.
59	59	Light Weight Autoclaved Aerated concrete Block work using Grade-I AAC block of required Size and thickness of compressive strength 40Kg/cm2 having dry density 550 to 650 Kg /Cum conforming to IS-2185 Pt-3 or pt-4 in cement mortar of prop 1:4 / adhesive of approved manufacturer including racking out joints and curing complete as specified & directed. (protruding rod is to be provided at every 3 course interval and will be measured and paid separately)\nFor 125mm thick wall\nIn superstructure above plinth level up to 1st floor level.	item59	14444	SQM.
60	60	Extra for AAC block walling for each subsequent floor or part thereof above the 1st floor level to Roof\n(i) 125mm thick wall	item60	14706	SQM.
61	61	Stone masonary work in retaining wall, wing wall, abutment, foundation, steps, plinth etc. in cement mortar in prop 1:6 with levelling course of 1:6:12 with both faces hammer dressed including bonding, providing face stone, through stone and centering including racking of joints, curing and supplying and all carriage of stone as directed including payment of forest royalty and sales tax and carriage.\n(a) Random Rubble Masonry	item61	121	CUM.
62	62	Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws.\nNon decorative type and block board core.\n(ii) 35 mm thick .	item62	4117	SQM
63	63	Providing, fitting and fixing factory made Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately.)\n(b) 35mm thick	item63	9239	SQM
64	64	Extra for providing lapping with 1st class Teak wood battens of 25mm minimum depth on all edges of the shutters.	item64	13106	SQM
65	65	Providing, fitting and fixing Wire gauge shutters using galvd. M.S. wire of I.S designation 85G with wire of dia 0.56mm for doors, windows and clerestory windows including oxidised M.S butt hinges (100mm x 58mm x1.90mm)\n(ii) 35 mm thick .	item65	1736	SQM
66	66	Supplying, fitting, fixing Stainless Steel fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished )\nb) Tower Bolt\nii) 250mm x 10mm	item66	4608	EACH
67	67	Supplying, fitting, fixing Stainless Steel fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished )\nb) Tower Bolt\nii) 150mm x 10mm	item67	2249	EACH
68	68	Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )\nr) Curtain rod\ni) 20mm x 2mm	item68	5516	RM
69	69	Providing and fixing 12 mm thick and 150mm wide pelmet with 25 mm dia wooden curtain rod and bracket including fixing with 15mmx3mm M.S flat 100mm long plugs complete.\n(a) First class Indian Teak wood/ Sisu wood	item69	844	R.M.
70	70	Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )\nc) Door handles\niii) 150mm	item70	10317	EACH
71	71	Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )\nm) Mortice lock vertical type\nii) 75mm(Godrej with handle(4 lever)	item71	4530	EACH
72	72	Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )\nt) Door stopper with rubber stopper)	item72	4532	EACH
73	73	Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )\nl) Hydraulic door closure	item73	2112	EACH
74	74	Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) -\nq) Kicking plate	item74	9648	EACH
75	75	Supplying and installing uPVC- Sliding Windows made out of Lead free green profile having \"GREENLINE\" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent.\nWith 5mm clear glass\n(a) 2 Track Sliding Window with Flyscreen using uPVC section of sizes 88mm x 50 mm x 2.4mm thick wall for frame with inbuilt flyscreen track, 37mm x 61mm x 2.4mm thick wall for glass sash, 25mm x 49mm x 2.4mm thick wall for flyscreen sash having 1.5mm thick reinforcement, Interlock: 43mm x 23mm (Glass Panel)\n(WINSTA KOMMERLING/ FINESTA/ ENCRAFT)\n(i) 2-Panel with 5mm clear float glass	item75	1284	SQM.
76	76	Providing and fixing stainless steel (Grade 304) railing made of hallow tubes, chanells, plates etc. including welding grinding buffing, polising and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i.e. fixing railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge.(for payment purpose only weight of stainless steel members shall be considered excluding fixing assessories such as nuts, bolts, fasteners etc.)	item76	87858	KG
77	77	Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws.\nI . Plain grill ( Fixed to wooden frames)	item77	140166	KG
78	78	Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint.	item78	38	SQM
79	79	Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately).\n(a) 1.25mm thick sheet\n(i) Size 90mm x 60mm (Single rebate)	item79	12483	RM
80	80	Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately).\n(a) 1.25mm thick sheet\n(iv) Size 125mm x 60mm (Double rebate	item80	3839	RM
81	81	40 mm thick cement concrete floor consisting of 25 mm under layer of cement concrete in prop 1:3:6 (1cement : 3coarse sand : 6 coarse aggregate of 12.5 mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement : 1coarse sand : 2 coarse aggregate of 10 mm and down) finished with a floating coast of neat cement finish using cement slurry for bond @ 2.75 kg. per sqm. of floor area, wearing layer is to be laid in panels including curing complete as directed.	item81	6012	SQM
82	82	Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor.\n(b) 20 mm thick	item82	602	SQM
83	83	Providing Ceramic Floor Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department).\nDelux range\nSomany/ Orient/Nitco/Qutone Make\nOf size 300mmx300mm and above	item83	4350	SQM
84	84	Providing Ceramic Floor Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department).\nExecutive range\nSomany/ Orient/Nitco/Asian Make\nOf size 600mmx600mm and above	item84	4700	SQM
85	85	Providing Ceramic Floor Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department).\nDelux range\nSomany/ Orient/Nitco/Qutone Make\nOf size 600mmx600mm and above	item85	1427	SQM
86	86	Providing polished Ceramic wall Tiles of approved quality, size, shape and thickness not less than 8 mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 Cement: 3 Coarse sand), including cutting where necessary finished with flush pointing with fix-A Tile (Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry) mixed with approved pigment to match the shade of tiles complete at all levels as specified and directed (coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Wall means both interior and exterior walls).\nDelux Range (Somany/ Orient/ Nitco/ Varmora Make)\nof size 300mm x 450mm and above	item86	17513	SQM.
87	87	Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 8mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)\nNormal range\nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make\nOf size 600mmx600mm and above	item87	62370	SQM
88	88	Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 8mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)\nNormal range\nExecutive range (800mmx800mm)\nSomany/Varmora/Nitco/Orient made\nOf size 800mmx800mm and above	item88	35297	SQM
89	89	Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 8mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)\nc) Delux range\nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make\nOf size 1000mmx1000mm and above	item89	10211	SQM
90	90	Providing Polished vitrified wall tiles of approved quality of specified size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/ Sika/ Pedelite/ Rouf)/ White cement slurry mixed with approved pigment to match the shade of tiles complete at all levels as specified and directed (coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department).\nOf size 300mm x 600mm and above	item90	143010	SQM.
91	91	Kota stone slab flooring of 18 mm thick over 20 mm thick base of cement mortar 1 : 6 (1 cement : 6 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete.\n550mm x 550mm	item91	15618	SQM.
92	92	Kota stone slab of 18 mm thick in riser of steps, skirting, dado and pillars laid with 10 mm thick cement plaster 1 : 3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete.\n550mm x 550mm	item92	1700	SQM.
93	93	Extra for nosing in steps of red or white, fine dressed and rubbed with sand stone.	item93	23575	R.m
94	94	Providing Polished Granite Slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/ Sika/ Pedelite/ Rouf)/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (Cement plastering to be measured and paid separatly) (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department).\nDelux Quality\nWith Fix-A-Tile (Choksey/ Sika/ Pedelite/ Rouf)	item94	11946	SQM
95	95	Providing polished granite tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls).\n(ii) With White cement	item95	9580	SQM
96	96	Providing, fitting and fixing Laminated abrasion resisitant wooden flooring from Uniproducts (India) Ltd. of thickness not less than 8.2 mm laid on existing concrete floor with under layer of approved transparent polythene and foam sheet to make the floor surface even and sound free complete as Per Design and approved by Department.\nUnitex AC4 Brand	item96	3575	SQM
97	97	Providing Antiskid tile of approved quality size, shape and thickness not less than 8mm on floor, skirting over a cement mortor bed of 15 mm thick in prop. 1:3 ( 1 Cement : 3 Coarse Sand) approved make fix with Fix-A-Tile (Choksey/sika/Pedelite/Rouf)/white Cement Complete at all level as specified and directed.\nCeremic - (Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make)\nNormal Range (Size 300mm X 300mm and above)	item97	1629	SQM
98	98	Providing Antiskid tile of approved quality size, shape and thickness not less than 8mm on floor, skirting over a cement mortor bed of 15 mm thick in prop. 1:3 ( 1 Cement : 3 Coarse Sand) approved make fix with Fix-A-Tile (Choksey/sika/Pedelite/Rouf)/white Cement Complete at all level as specified and directed.\nVitrified- (Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make)\nExecutive Range-2, Imperial Series -Gres Tiles (Size 600mm X 600mm and above)	item98	6339	SQM
99	99	10 mm cement plaster in single coat on fair side of brick/concrete walls for interior plastering upto 1st floor level including aries or rounded angles not exceeding 80mm grith and finished even and smooth including curing complete as directed.\nIn cement mortar 1:5 (Gr. Floor to Terrace Floor)	item99	270813	SQM.
100	100	Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed.	item100	1.14689e+06	SQM.
101	101	15 mm cement plaster in single coat on rough side of single or half brick walls for interior plastering upto 1st floor level including aries or rounded angles not exceeding 80mm grith and finished even and smooth including curing complete as directed.\nIn cement mortar 1:5 (Gr. Floor to Terrace Floor)	item101	261534	SQM.
102	102	Extra over item above for interior plastering above 1st floor level for every additional floor or part there of including curing complete as directed.	item102	1.10535e+06	SQM.
103	103	20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed.\nOn rough side (backing coat 15 mm and finishing coat 5mm thick)\nd) In cement mortar 1:5 (Gr. Floor to Terrace Floor)	item103	98115	SQM.
104	104	Extra over item above for exterior plastering over wall for every additional floor or part there of beyond 1st floor level including curing complete as directed.	item104	384622	SQM.
105	105	15 mm thick plain cement mortar bands in cement mortar 1:4 in width including curing complete as directed.\nA) Up to 300 mm width\nFlush band	item105	11635	SQM.
106	106	15 mm thick plain cement mortar bands in cement mortar 1:4 in width including curing complete as directed.\nA) Up to 300 mm width\nRaised band	item106	11635	SQM.
107	107	Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.	item107	98113	SQM.
108	108	Providing two coats of Birla White Wall Care Putty (Water Resistance White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm).\nThickness = 1.5 mm thick	item108	631457	SQM
109	109	Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J&N paint/ Narolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.\nAcrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J&N paint/ Narolac).	item109	533447	SQM.
110	110	Painting two coats (Including priming coat) on new wood and wood based surface surface with enamel paint of approved brand and manufactures (Asian paint/ Berger paint/ ICI paint/ J&N paint/ Narolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.\nSurfaces over 100 mm in width or girth.\nHigh gloss (Asian paint/ Berger paint/ ICI paint/ J&N paint / Nerolec).	item110	269	SQM.
111	111	Painting two coats (Including priming coat) on new steel and metal surface surface with enamel paint of approved brand and manufactures (Asian paint/ Berger paint/ ICI paint/ J&N paint/ Narolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter.\nSurfaces over 100 mm in width or girth.\nHigh gloss (Asian paint/ Berger paint/ ICI paint/ J&N paint / Nerolec).	item111	173111	SQM.
112	112	Finishing old/ new wall with water proofing weather coat smooth anti-fungal premium textured exterior finish of Sandex Matt brand of Snowcem India Ltd. of required shade after clearing and clearing the surfaces etc.including scaffolding complete as directed at all levels (two coats).	item112	115182	SQM.
113	113	Providng and laying of plaster (1:4) with GI chicken/PVC Wire Mesh/Glass Fibre Mesh Or Providing or laying of wall putty of 1mm(Max) thick over the insuboard's bottom surface and painting\ni) Providng and laying of plaster (1:4) with GI chicken/PVC Wire Mesh/Glass Fibre Mesh	item113	63735	SQM.
114	114	Extra for fibre reinforcing concrete/ mortars by providing and mixing Recron3S of Reliance Industries Ltd. @ 125gms per bag of cement as specified and directed by the Department complete at all levels.\nB In Plasters/ mortars of proportion:\n(ii) 1 : 4 (1cement : 4coarse sand)	item114	9769	CUM.
115	115	Providing, fitting and fixing anodised aluminium framed glazed doors with partition walls partly glass and partly prelaminated board with anodised aluminium frame made of 100mm x 43mm x 2mm sections of approved brand with doors style of size 81mm x 43mm x 2mm, top rails 46mm x 43mm x 2mm, lock rails 81mm x 43mm x 2mm, fitting with glazing clip, special rubber type gusket complete including hydraulic floor spring pivot aluminium door handle lock angles cleat etc. complete as directed by the department at all levels.\n6mm thick glass panes and 12mm prelaminated board	item115	6774	SQM.
116	116	Providing, fitting and fixing coloured anodised aluminium sliding glazed doors with anodised aluminium frames made of 100mm x 45mm x 2mm section of approved brand with door style of size 81mm x 45mm x 2mm, top rails 55mm x 45mm x 2mm, lock rails 81mm x 45mm x 2mm, fitted with glazing clip, special type rubber gasket complete including roller, tower bolt, aluminium door handle, lock, angles, cleat etc. complete as specified and directed by the department at all levels.\n6mm clear glass	item116	847	SQM.
117	117	Supplying and installing uPVC- Casement Windows made out of Lead free green profile having \"GREENLINE\" mark of BIS standard uPVC sections of wall thickness 2.4mm, multichambered with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including glazing bead, folding gasket, glazing gasket, friction stay, Espag handle, Espag, keeper, drain cap, run up block, fisher screws, packing pieces with all stainless steel screws complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets,bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent.\n(d) Single leaf Top hung Window using uPVC section of size 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash\nWith 5mm clear float glass\n(WINSTA KOMMERLING/ FINESTA/ ENCRAFT)	item117	1914	SQM.
118	118	FOR TOILET WATERPROOFING\nApplying 2 coats of 1mm thick elastomeric cementitious waterproofing coating Brushbond RFX of Fosroc Chemicals for water proofing structures like roof slabs, basement, sunken slabs, water tank etc., after proper surface preparation and soaking the surface with water prior to application complete as specified and directed by the Department at all levels.	item118	7563	SQM.
119	119	FOR ROOF\n(A) Supplying, mixing, laying and applying the following waterproofing systems over Raft slabs, Roof slabs, Terraces etc. including curing complete as specified and directed by the Department at all levels.:\n(i) 1mm thick single coat of Master Crete M-81 of Choksey Chemicals /Dr. Sealkit Sealcrete (Asian Chemicals)/ mixed with cement in the ratio 1:2 as a prime coat.\n(ii) 3mm thick Polymer modified mortar - Cement sand mortar (in prop 1:3) mixed with Master Crete M-81/Dr. Sealkit Sealcrete (Asian Chemicals) @ 15% by weight of cement.\n(iii) 1mm thick coat of Master Crete M-81 /Dr. Sealkit Sealcrete (Asian Chemicals) mixed with cement in the ratio 1:2 as final coat.	item119	10356	SQM.
120	120	FOR ROOF\n(A)Providing & applying over roof slab/raft slab, polymer modified bituminous /PU waterproofing membrane Proofex SM / Nitoproof 600 PF, Fosroc Chemical or equivalent on an unprimed substrate using specially designed spray application applicaation to be applied in a single coat, using wet on wet passes to give a nominal dry film thickness of 2 mm followed by applying ProofexGeo Textile having weight of 200gm per Sqm immediately after the application of Proofex SM Membrane when the surface is still wet but not tacky and as specified and directed by the department.	item120	20447	SQM.
121	121	FOR TOILET & ROOF\nSupplying, providing, mixing and laying over waterproofing layers/coatings ( brick bat or water proofing) with cement mortar screed of average 25mm thick or as per drawings / requirements in proportion 1:4 (1 cement : r sand) admixed with integral waterproofing admixture Conplast x 421IC of Fosroc Chemicals @ 125ml per bag of cement complete as specified and directed by the Department at all levels.	item121	37700	SQM.
122	122	FOR TOILET & ROOF\nFilling sunken floor with broken jhama brick bats and sand including compacting and supplying of materials complete as specified and directed upto first floor level.	item122	4716	CUM.
123	123	Extra cost for lifting of brickbats and sand for filling of sunk floor for each subsequent floors above the 1st floor as directed and specified.	item123	23285	CUM.
124	124	Providing and fixing of leak proof,fire retardant and Uv resistant skylighting galzing with Lexan polycarbonate sheet fixed with specially designed Domal management system confirming to IS:737 alloy & temper 6063 - T6 with a UTS of 180 to 200 mpa and weight of 1.03 kg/mtr. approx with EPDM rubber gasket of specific gravity as per ISO 2781,age resistant as per ASTM - D573 hardness as per 2240 & tensile strength as per ASTM 412 including the silicon sealent GE Bayer Weathersil NY as per drawing and directed by the Engineer in charge.\n10 mm thick Polycarbonate Sheet (Multiwall)	item124	1354	SQM.
125	125	Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels.\nIn cement mortar	item125	4559	CUM.
126	126	Dismantling and removing the existing door and window frame (chowkath) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels.\nArea of door/window up to 3.00 m2	item126	2314	EACH
127	127	Dismantling and removing the existing door and window frame (chowkath) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels.\n(iArea of door/window above 3.00 m2	item127	5422	EACH
128	128	Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels	item128	5177	CUM.
129	129	Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels.	item129	14606	SQM.
130	130	Dismantling all types of corrugated/ trapezoidal sheet roofing including ridges, hips, valleys and gutters etc. and stacking the materials as directed by the department for all levels	item130	9500	SQM.
131	131	Demolishing the plastering from walls/ R.C.C. and P.C.C. members without causing any damage to the wall/ member upto any height including disposal of debris as directed for all levels.	item131	576	CUM.
132	132	Dismantling all types of ceiling, partition and wall lining and stacking the materials as directed by the department for all levels	item132	14964	SQM.
133	133	Dismantling steel work in single sections (R.S.Joists, channels, angles, tees and flats etc.) including dismembering and stacking the materials as directed by the Department for all levels.	item133	150000	Kg
134	134	Dismantling steel work in built up sections in joists, angles, channels, tees, flats etc. including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking the materials as directed by the Department for all levels	item134	105000	Kg
135	135	Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical locations in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions.The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in-Charge. (Material shall conform to ASTM 6063).\nFloor Joint upto 200 mm gap	item135	523	metre
136	136	Providing and fixing of expansion joint system related with wall joint (internal/external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning /centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall conform to ASTM 6063.)\nWall Joint of 200 mm gap	item136	218	metre
137	137	Providing and fixing of expansion joint system of approved make and manufacture for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates as per ASTM B221-02. The system shall be such that it provides water tight roof to roof /roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions.\nThe Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.)\nRoof Joint upto 200 mm gap	item137	185	metre
138	138	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.\nGranite of any colour and shade (Area of slab upto 0.50 sqm)	item138	97	SQM.
139	139	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.\nGranite of any colour and shade (Area of Slab over 0.50sqm)	item139	2529	SQM.
140	140	Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.\nGranite work.	item140	916	RMT.
141	141	Extra for fixing marble/granite stone over and above coresponding basic item, in facia and drops of width upto 150 mm with expoxy resin based (Araldite or equivalent) adhesive including cleaning etc. complete.	item141	3728	RMT.
142	142	Extra for providing opening of required size & shape for wash basins/kitchen sink in kitchen platform. Vanity counters and similar location in marble/granite/stone work including necessary holes for pillar taps etc. including rubbing,moulding and polishing of cut edges etc. complete.	item142	1007	RMT.
143	143	Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.\n1.0 mm thick	item143	26212	SQM
144	144	Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured):\nRectangular or square.	item144	3835	SQM
145	145	Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).	item145	1396	SQM
146	146	Providing and fixing fire resistant door frame of section 50 x 60mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter. The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded).	item146	2856	RMT.
147	147	Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately).	item147	1848	SQM
148	148	Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per direction of Engineer-in-charge. The glass shall be clear, toughened, interlayered, non-wired fire resistant having 11 mm thickness of approved brand with 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 15 min of insulation (EI15) and having a sound reduction of 37dB and LT of 86%. Glass shall be compliant to class 2(B)2 category of Impact Resistance as per EN 12600. The glass should be manufactured in UL & TUV audited Facility and including UL-EU Certification.The maximum glazing size cannot be more than 1100 mm x 2200 mm (w x h) or 2.42 sq mts in total area. The test report for the complete system (Glazed Door or Partition) will be considered valid only if it contains the stamp and signature of the authorized signatory from the glass manufacturer. (Actual glass size is to be measured at site for payments).	item148	1848	SQM
149	149	Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.	item149	676	EACH
150	150	Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/ sqm(both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture’s specification and direction of engineer in charge all complete.\n75 mm overall thickness partition with 12.5 mm thick double skin fire rated board conforming to IS:2095: part I	item150	4280	SQM
151	151	Providing and fixing approved brand and manufacture SS 304 grade wall mounted door buffer fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.	item151	5843	EACH
152	152	Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured).	item152	13966	SQM
153	153	Providing and fixing approved brand and manufacture SS 304 grade D type 1200mm Pull Handle with 32mm dia fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.	item153	35	PAIR
154	154	Providing and fixing approved brand and manufacture SS 304 grade D type 300mm Pull Handle with 32mm dia fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.	item154	328	PAIR
155	155	Providing and fixing approved brand and manufacture SS 304 grade Glass to Glass Lock Round type with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.	item155	195	EACH
156	156	Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 50 mm	item156	1149	EACH
157	157	Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.\nDouble strip (horizontal type)	item158	2297	EACH
158	158	FOR EXTERNAL BAMBOO CLADDING\nProviding & fixing in position Phenol bonded Bamboowood external wall cladding at all height with planks of sizes 10mm thick, 1800mm length (minimum) and 130 mm wide (minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over backlayment of 1.00 mm thick expanded polyethylene foam of density 40kg/cum in two layers, first layer on wall surface before fixing wooden frame and second layer on frame under cladding. The bamboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.	item159	1750	SQM
159	159	Providing and fixing of Hollow metal lead lined door from ISO 9001-2000 certified manufacturer. Pressed Galvanized steel Single/Double leaf to required sizes of approved make shakthi met-door or approved equivalent which consists of frame, shutter, infill and finish as detailed below Door frame shall be double rebate profile of size 143x57 mm made out of 1.60mm (16 gauge) thick galvanized steel sheet. Frames shall be metered and field assembled with self tabs. The inside face of the frame face trim to rebate height should be protected with 2mm thick lead line. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Rubber door silencers should be provided on the striking jamb. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame installed should be grouted with cement & sand slurry necessary for fire doors on the clear masonry opening.\nDoor leaf shall be 48mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 1.2 mm (18 gauge) thick galvanised steel sheet. The internal construction of the door should be rigid with lead line of 2mm thick all across the inside of the exposed surface. In addition the door should have a basic infill Honey comb core with necessary reinforcement both on top and bottom. All doors should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers as per ANSI Standard. The edges should be interlocked with a bending radius of 1.4 mm.\nAll doors and frames shall be finished with etched primer coating, stove zinc phosphate primer and thermosetting polyurethane aliphatic grade paint of approved RAL colour. The door leaf and frame shall have passed minimum 250 hours of salt spray test.\nRate should include supply and installation of door and hardware set.\nLead line door Single / double leaf of size\nDoor - 1500 mm x 2100 mm	item160	15	EACH
160	160	Structural steel work riveted or bolted in built up sections, trusess and framed work, including cutting,hoisting,fixing in position and applying a priming coat of approved ateef primer all complete.	item161	19337	KG
161	161	Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coar of approved steel primer, welded and bolted including special shaped washers etc. complete: Hot finished welded type tubes	item162	761464	KG
162	162	Steel work welded in built up sections/framed work including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.\nIn gratings, frames, guard bar, ladder, railings, brackets, gates and similar works	item163	55613	KG
163	163	Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.\nUsing M.S. angels 40x40x6 mm for diagonal braces	item164	150	SQM
164	164	Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover	item165	197	SQM.
165	165	Providing and fixing ball bearing for rolling shutters.	item166	36	EACH
166	166	Extra for providing mechanical device chain and crank operation for operating rolling shutters.\nExceeding 10.00 sqm and upto 16.80 sqm in the area.	item167	197	SQM.
167	167	Extra for providing grilled rolling shutters manufactured out of 8 mm dia.M.S. bar instead of laths as per design approved by Engineer-in-charge.(area of grill to be measured).	item168	99	SQM.
168	168	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape\nwherever required.	item169	8321	SQM.
169	169	Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :\nRidges plain (500 - 600mm)	item170	698	metre
170	170	Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :\nGutter (600 mm over all girth)	item171	283	metre
171	171	Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.	item172	3911	SQM
172	172	Providing and fixing 18mm thick pre-polished granite stone strip of any colour and shade 60mm wide with one edge round moulded and polished, fixing the strip in wall above the top of dado, by cutting chase in wall and fixing the same with cement mortar 1:3 (1cement : 3 coarse sand), neatly finished and fixed such that the outer rounded edge projected 20mm beyond the surface of dado , all complete as per direction of engineer-in-charge.	item173	25209	RMT.
173	173	Providing and laying C.C. pavement (TRIMIX) of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately).	item174	3740	CUM.
174	174	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :\nFor fixed portion\nPowder coated aluminium (minimum thickness of powder coating 50 micron)	item175	159374	KG.
175	175	For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)\nPowder coated aluminium (minimum thickness of powder coating 50 micron)	item176	82661	KG.
176	176	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item):\nWith float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)	item177	5396	SQM.
177	177	Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-incharge complete.\nUpto 5mm depth and 5 mm width	item178	81123	RMT.
178	178	Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.	item179	4785	SQM.
179	179	Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).	item180	968	SQM.
180	180	Providing and fixing Single Glazing 6mm thick toughened glass complete in all respects as per direction of the Engineer-in-charge. (Required properties Solar factor = 0.45, U-Value = (W/sq.m-K) 5.7W /M2K, Visible light transmittance = 0.30)	item181	25550	SQM.
181	181	Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately)\nNote: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.\nThree track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).	item182	5751	SQM.
182	182	Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.	item183	14533	Kg
183	183	Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:\na) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:\nb) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.\nc) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.\nd) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.\ne) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge.\nNote:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places..\nNote:- 2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories\n6) Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml	item184	1262	SQM.
184	184	Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.“(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2)“For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.“\nColoured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.	item185	1262	SQM.
185	185	Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in-Charge.	item186	318	SQM.
186	186	Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:\na) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.\nb) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.\"	item187	453	SQM.
187	187	Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof.\nThe rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.	item188	1262	SQM.
188	188	Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.\nWith 12 mm mild steel U beading	item189	24266	SQM.
189	189	Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck, using integral crystalline admixture @ 0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer’s specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.	item190	50345	kg
190	190	Basement Waterproofing for Vertical Surfaces and Retailing Wall\nSupplying and Installing Proofex3000 manufractured by Fosroc / Chocksey Cehmicals / Dr.Fixit, a selfadhesive, coldapplied, flexible 1.5 mm thick waterproofing membrane by manufacturer approved applicator which comprises of a self adhesive polymer modified bitumen compound with crosslaminated HDPE film. The membrane shall have a premarked minimum 50mm overlap aid available & applied on the uniform surface of the Vertical RCC Wall after application of single component solvent/water based bituminous primer approved & Installed as permanufacturer's recommendation. The rate inclusive of minimum 20mm expanded polystyrene protection board Tierod cutting and grout filling, pipe sleeve joint filling and sealing. The self adhesive membrane Suitable for waterproofing basements grades 2 and 3 as define din BS8102:2009, ‘Protection Of Structures Against Water From The Ground’ basement as per BS8102:2009 and shall be BBA certified andhaving elongation.	item191	9063	Sqm
191	191	Basement Waterproofing for Horizontal Surfaces\nProviding and installing waterproofing treatment for \"Raft 'Slab\" by using fully bonded HDPE sheet membrane 1.2mm thick HDPE P manufactured by Fosroc / Chocksey Cehmicals / Dr.Fixit or equivalent before casting of the base RCC slab. The Membrane should be a unique composite sheet comprised of a thick HDPE film, pressure sensitive adhesive and weather resistant protective coating. The membrane shall conforms to basement waterproofing protection to grade 3 as defined in BS 8102:2009.The membrane shall have thickness- : 1.2mm,Tensile strength :27 MPa as per ASTM D412, Elongation (Peak) : 500%, puncture resistance :1000N as per ASTM E154, Peel Adhesion to concrete 880N/m as per ASTM D903, Hydrostatic pressure resistance up to 70 M Head of water as per ASTM D751-06(2011). The cost inclusive of material, application, machinaries required including treatment of Pile Heads using micro-concrete.	item192	41282	Sqm
192	192	Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.\nFor vertical surface two coats @ 0.70 kg per sqm	item193	9016	SQM.
193	193	Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.\nFor horizontal surface one coat @1.10 kg per sqm.	item194	25913	SQM.
194	194	Providing and Placing in position suitable PVC water stops for construction/expansion joints between two RCC memberrs and fixed to the reinforfement with binding wire before pouring concrete etc. complete.\nSerrated with central buld (225 mm wide, 8-11 mm thick)	item195	450	RMT.
195	195	Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.	item196	64	EACH
196	196	Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting with :\n12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I	item197	14227	SQM.
197	197	Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gsm/sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm center to center and cross \"T\" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main \"T\" at 600mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 x mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-charge.\nGI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum),including factory painted after bending and perforation,and backed with a black Glass fiber acoustical fleece.	item198	16153	SQM.
198	198	Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod upto 1000mm length and L-hape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.\nWith 16 mm thick beveled tegular mineral fibre Antimicrobial false ceiling tile confirming to ISO 5 (class 100 ) specifications	item199	16153	SQM.
199	199	Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.	item200	34418	SQM.
200	200	Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).	item201	32698	CUM.
201	201	Supplying and stacking at site :\n90 mm to 45 mm size stone aggregate	item202	5163	CUM.
202	202	Supplying and stacking at site :\n363 mm to 45 mm size stone aggregate	item203	5163	CUM.
203	203	Supplying and stacking at site :\nStone screening 13.2 mm nominal size (type A)	item204	258	CUM.
204	204	Supplying and stacking at site :\nStone screening 11.2 mm nominal size (type A)	item205	258	CUM.
205	205	Supplying and stacking at site : Moorum	item206	1721	CUM.
206	206	Laying spreading and compacting stone aggregate of specified sizes to WBM specifications including spreading in uni form thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne in stages to proper grade and camber, applying and brooming requisite type of screening/binding material to fill up interstics of coarse aggregate watering and compacting to the required density.	item207	12563	CUM.
207	207	Surface dressing one coat on new surface with bitumen of specified grade at a rate of 1.95 kg/sqm of surface area with 1.5 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity , etc. complete :\nUsing bitumen emulsion (minimum 50% bitumen content-RS grade conforming to IS : 8887)	item208	17881	SQM.
208	208	Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom.\nWith rapid setting bitumen emulsion\nOn bituminous surface @ 0.25kg/sqm	item209	17881	SQM.
209	209	Providing and laying Bitumen Penetration Macadam with hard stone aggregate of quality, size and grading as specified, with bitumen of suitable penetration grade, including required key aggregate as specified, spreading coarse aggregate with the help of self propelled/tipper tail mounted aggregate spreader and applying bitumen by a pressure distributor and then spreading key aggregate with the help of aggregate spreader complete, including consolidation with road roller of minimum 8 to 10 tonne capacity to achieve specified values of compaction and surface accuracy :\nFor 50mm compacted thickness using coarse aggregate of size 50-20 mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 cum per 10 sqm. With paving asphalt grade VG - 10 @ 50 kg/ 10 sqm.	item210	17881	SQM.
210	210	Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade VG - 10 and blinding surface with 0.90 cum of stone aggregate of 6.7 mm size (Passing 11.2 mm sieve and retained on 2.36 mm sieve) per 100 sqm of road surface, including rolling and finishing with power road roller all complete.\nNote: Seal coat items to be operated only with the prior approval of chief Engineer concerned.	item211	17881	SQM.
211	211	Painting runway/taxi track/apron marking with adequate no. of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge i/c cleaning the surface of all dirt, scales, oil, grease and other foreign material etc. and lining out complete.\nNew work (Two or more coats)	item212	985	SQM.
212	212	Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50 mm thick compacted of coarse sand, filling the joints with coarse sand etc. all complete as per direction of engineer-in-charge.	item213	9333	SQM.
213	213	Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).\nMedium shade pigment using 50% white cement 50% Grey cement	item214	8889	SQM.
214	214	Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line ,level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand) including making joints with or without grooves (thickness of joints except sharp curve shall not be more than 5mm) including making drainage opening wherever required complete etc. as per direction of engineer-in-charge(length of finished kerb edging shall be measured for payment).(Precast C.C. kerb stone shall be approved by engineer-in-charge).	item215	482	CUM.
215	215	Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).	item217	2866	CUM.
216	216	For Horticulture and Landscaping Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment).	item218	2130	CUM.
217	217	For Horticulture and Landscaping Supplying and stacking at site dump manure from approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm	item219	533	CUM.
218	218	For Horticulture and Landscaping Supplying and stacking at site dump manure from approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 16 mm	item220	533	CUM.
219	219	For Horticulture and Landscaping Supplying and stacking at site dump manure from approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 4.75 mm	item221	533	CUM.
220	220	For Horticulture and Landscaping Fine dressing of the ground	item222	10647	sqm
221	221	For Horticulture and Landscaping Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Officer-in-charge (Cost of sludge, dump manure and / or good earth to be paid separately).	item223	1597	CUM.
222	222	For Horticulture and Landscaping Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge..	item224	1597	CUM.
223	223	For Horticulture and Landscaping Supplying & Stacking of Selection No.1 Grass at site fresh & free from weeds having proper roots in green including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.	item225	10647	SQM.
224	224	Grassing with selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the good earth if needed shall be paid for separately).\nIn rows 5 cm apart in both directions	item226	10647	SQM.
225	225	Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :\nHoles 60 cm dia, and 60 cm deep.	item227	1447	EACH
226	226	Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :\nHoles 45 cm dia, and 45 cm deep.	item228	1166	EACH
227	227	Providing and Displaying of Wadelia trilobata plant,full of leaves in 15 cm size of Poly bags & as per direction of the officer-in-charge.	item229	254	EACH
228	228	Providing and Displaying of Duranta Golden plant, having ht.15 to 20 cm bushty shape plant with fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge..	item230	338	EACH
229	229	Providing and Displaying of Iresine herbstii plant, of height 20-30 cm. full of branches well developed in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.	item231	169	EACH
230	230	Supply and stacking of Alstonia scholaris plant of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge.	item232	85	EACH
231	231	Supply and stacking of Bauhinia blakeana (Kachnar) plant of height 120-150 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.	item233	135	EACH
232	232	Supply and stacking of Bombax ceiba plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.	item234	126	EACH
233	233	Supply and stacking of Grevillea robusta (Silver Oak) plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.	item235	254	EACH
234	234	Supply and stacking of Kigelia pinnata plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.	item236	506	EACH
235	235	Supply and stacking of Melia azedarach plant of height 120-135 cm. in big poly bag of size 25cm as per direction of the officer-in-charge.	item237	675	EACH
236	236	Supply and stacking of Michelia champa (Golden Champa)plant of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.	item238	338	EACH
237	237	Supply and stacking of Putranjiva roxburghii plant of height 90-105 cm. in big polybag of size 25 cm as per direction of the officer-in-charge.	item239	254	EACH
238	238	Supply and stacking of plant Jatropha multifida (red colour) of height 60-75 cm. multibranched in p.bag of size 25 cm as per direction of the officer-in-charge.	item240	169	EACH
239	239	Supply and stacking of plant Calliandra hybrida of height 105-120 cm., well branched, bushy in big size HDPE bag as per direction of the officer-in-charge.	item241	246	EACH
240	240	Supply and stacking of plant Gardenia jasminoides of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge.	item242	492	EACH
241	241	Supply and stacking of plant Nerium oleander (kaner) of height 45-60 cm. with 3-4 branches in poly bags of size 20 cm as per direction of the officer-in-charge.	item243	338	EACH
242	242	Supply and stacking of Clerodendrum splendens plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.	item244	254	EACH
243	243	Supply and stacking of Jasminum grandiflorum (chameli) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. .	item245	506	EACH
244	244	Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.\nFor thickness of tiles 10 mm to 25 mm	item246	11680	SQM.
245	245	Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.	item247	2920	CUM.
246	246	Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials including excess earth by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.	item248	11577	CUM.
247	247	PLUMBING WORKS\nSanitary Fixtures & CP Brass Fittings\nProviding fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately)\nIndian type W.C Orissa pattern of size 580 x 440 mm\na) White\niii) Jaquar make	item249	263	Each
248	248	Provinding fitting and fixing Vitreous china wall hang water closet (European type W.C PAN 400 mm high) with seat and lead, CP Brass hinges and rubber buffers , CI/MS brackets,40 mm dia flush band with fittings including painting of fittings and brackets, required.(flushing Cistern to be paid separately)\na) White\niii) Jaquar make\n(i) Florentine Cat. No. FLS-WHT-0111 (inclusive of seat cover and fittings)	item250	729	Each
249	249	(Provinding fitting and fixing Vitreous china wall hang water closet (European type W.C PAN 400 mm high) with seat and lead, CP Brass hinges and rubber buffers , CI/MS brackets,40 mm dia flush band with fittings including painting of fittings and brackets, required.(flushing Cistern to be paid separately)\na) White\niii) Jaquar make\nii) Solo Cat. No. SLS-WHT-0117 (inclusive of seat cover and fittings)	item251	511	Each
250	250	Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)\ni) Parryware make\na) White\n(i) Economy Single Flush (Cat No.C8090/C8055)	item252	183	Each
251	251	Supplying ,fitting and fixing concealed cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)\nC) Jaquar make\na) White\nConcealed Cistern ( Cat. No. CIB-WHT-31801011X) with Control Plate (CP) (Cat.No. CIS-CHR-31191510X)	item253	1251	Each
252	252	Providing fitting and fixing vitreous china flat back type lipped front urinal; basin of with automatic flushing cistern with standard flush pipe and CP brass spreader andbrass unions,etc. complete including painting of fittings and complete, cutting and making good the walls & brackets, cutting and making good the walls & floors wherever required.\nC) Jaquar make\na) White\n(i) Urinal (Cat.No. URS-WHT-0704) with Sensor (Cat. No. SNR-CHR-51097)	item254	249	Each
253	253	Suppling fiting and fixing glass division plate of jaquar make including fitting and fixing compate as directed and specified.	item255	139	Each
254	254	Provinding vitreous china wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required.(Pillar cock, stop cocks, waste coupling are to be paid separately )\nTable Top Basin\n(C) Jaquar Make\n(ii) Solo ( Cat. No. SLS- WHT-0558)	item256	749	Each
255	255	Provinding vitreous china wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required.(Pillar cock, stop cocks, waste coupling are to be paid separately )\nTable Top Basin\n(C) Jaquar Make\n(iii) Lyric ( Cat. No. LYL-WHT-0555)	item257	678	Each
256	256	Providing fitting & fixing stainless steel kitchen sink of parry make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings, cutting & making good the walls wherever required.( Sink cock, stop cocks, waste coupling are to be paid separately .\n(A) Parryware Make\n(ii) Single Bowl with Drain board (400x200) flat Edge - Glossy ( Cat. No. C8537)	item258	221	Each
257	257	Providing fitting & fixing laboratory sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately.\n(A) Parryware Make\na) White\n(i) Lab Sink 450mm (Cat.No.C0602)	item259	375	Each
258	258	Providing fitting and fixing Decorative Mirror complete as directed and specified.\n(A) Parryware Make\n(a) Size 800mmx600mm	item260	678	Each
259	259	Providing fitting and fixing Decorative Mirror complete as directed and specified.\n(A) Parryware Make\n(b) Size 600mmx 450mm	item261	749	Each
260	260	Providing,fitting and fixing CP soap tray / soap dish complete as directed and specified.\n(i) Jaquar make\n(e) Hotelier (Cat.No. AHS - 1531)	item262	548	Each
261	261	Providing fitting and fixing liquid soap dispenser and liquid soap container complete as directed ad specified.\n(i) Jaquar make\n(c) Kubix with glass bottle (Cat.No. AKB-35735)	item263	1055	Each
262	262	Providing fitting and fixing CP towel rail complete as direted and specified\n(a) Jaquar make\n(vii) Kubix(600mm long) (Cat.No. AKB-35711)	item264	561	Each
263	263	Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified.\n(a) Jaquar make\n(ii) Continental towel ring round (Cat.No. ACN-1121BN)	item265	1055	Each
264	264	Providing ,fitting and fixing chrome plated robe hook complete as direted and specified.\n(a) Jaquar make\n(iii) Kubix (Cat.No.AKB-35791)	item266	1414	Each
265	265	Providing, fitting and fixing chrome plated tumbler holder complete as directed and specified.\n(a) Jaquar make\n(iii) Kubix (Cat.No.AKB-35741)	item267	548	Each
266	266	Providing fitting and fixing chrome plated TOILET PAPER holder of complete as directed and specified\n(a) Jaquar make\n(ii) Continetal toilet paper holder with flap(cat.No. ACN1153N)	item268	797	Each
267	267	Providing fitting and fixing chrome plated TOILET PAPER holder of complete as directed and specified\n(a) Jaquar make\n(vii) Kubix toilet roll holder with cover (Cat.No. AKB-35753)	item269	511	Each
268	268	Providing ,fitting andd Fixing chrome plated waste coupling complete as directed and specified.\n(a) Jaquar make\n(i) 32mm (HT/FT) (Cat.No. ALD-705/709	item270	1978	Each
269	269	Providing ,fitting andd Fixing chrome plated Bottle Trap complete as directed and specified.\n(a) Jaquar make\n(i) Bottle trap (with internal partition) 32mm size with 250mm long wall connection pipe(Cat.No.ALD-769)	item271	1427	Each
270	270	Supplying fitting and fixing C.P bib cock 15 mm dia of approved brand as directed and specified (G.I & C.P pipes will be measured separately)\nJaquar make\n(a) Continental / clarion\n(ii) Bibcock long thread	item272	183	Each
271	271	Supplying fitting and fixing C.P bib cock 15 mm dia of approved brand as directed and specified (G.I & C.P pipes will be measured separately)\nJaquar make\n(a) Continental / clarion\n(iii) 2-Way bib cock	item273	1231	Each
272	272	Supplying fitting and fixing chorom plated (C.P) stop- cock of approved brand and size as mentioned below as directed and specified.(G.I) & C.P Pipes will be measured and paid separately)\nJaquar\n(a) Continental / Clarion\n(iii) 15mm (Angular stop cock with long thread )	item274	3390	Each
273	273	Supplying and fiiting fixing C.P pillar cock of 15 mm dia of approved brand as specified and directed.\nJaquar make\n(a) Continental	item275	749	Each
274	274	Supplying,fitting and fixing chorme plated (C.P) shower 15 mm dia. Of approved nrand as directed and specified.( pipes will be measured and paid separately)\n(III) Jaquar Make\n(a) Continental\n(ii) Shower arm 190mm long heavy casted body with wall flange	item276	548	Each
275	275	Supplying,fitting and fixing chorme plated (C.P) shower 15 mm dia. Of approved nrand as directed and specified.( pipes will be measured and paid separately)\n(III) Jaquar Make\n(a) Continental\n(iii) Pressure adjustable shower with revolving joint	item277	548	Each
276	276	Supplying, fitting and fixing Chorme plated (C.P) basin mixer complete as directed\nJaquar make (For VIP use. Prior approval of chief Enginner PWD (Bidg) must be taken before use)\n(a) Continental/ Clarion\n(iii) Central hole basin mixer without popup waste system with 450mm long coper pipe and brass nuts Cat.No. 169	item278	678	Each
277	277	Supplying, fitting and fixing Chrome Plated (C.P) sink mixer complete as directed.\nJaquar make\n(a) Continental / Clarion\n(i) Sink mixer with swinging casted spout ( wall mounted model) Cat No. 309	item279	551	Each
278	278	Supplying fitting and fixing Chrome plated (C.P) bath tub spout of approved brand complete as directed.\nJaquar make\n(a) Continental\n(ii) Bath tub spout 235 mm long with wall falnge Cat No. 433	item280	548	Each
279	279	Supplying , fitting and fixing Chorme Plated (C.P) divertor of approved brand complete as directed .\nJaquar make\n(a) Continental/ Clarion - 4 way divertor for concealed fitting with build in non return valves with divertor handle Cat. No.421	item281	548	Each
280	280	Providing and fixing hand shower (Health faucet) with 1.2mtr long with 8mm dia Easy Flex Tube with wall hook and flow restrictor with flow rate 6 litre per minute at 3 bar in chrome finish and wall hook.	item282	1231	Each
281	281	Providing & fixing wall mounted 300mm Long SS Grab Bar including cutting & making good the walls.	item283	131	Each
282	282	Providing and fixing Stainless Steel Swing Handicap Grab Bar ,Including cutting and making good the walls wherever required.	item284	131	Each
283	283	Providing and fixing of fully automatic \"NO TOUCH\" durable & shock proof hand drier of approved make & manufacture suitable to operate on 220 volts, single phase 50 hz, A.C. power supply, 1500 Watt and directly plugged to power point complete in ABS plastic body having drying time 20-30 seconds complete as per direction of Engineer in Charge. The rate include cost of all material & labour involved in the item complete and all as per direction of engineer incharge.	item285	206	Each
284	284	Providing and fixing 150 litre/ hr. cooling and storage capacity,fully stainless steel electric storage type water cooler ( Blue Star model No. SDLX 15150 or equvalant) with inlet hose connection inbuilt float valve. 2 Nos. outlet foucet, drain tray with waste and pipe up to fllor trap heavy compressor and wire up to socket, 3 pin plug etc complete in all respect.	item286	110	Each
285	285	Soil, Waste, Vent & Rain Water Pipes\nSupplying, fitting and fixing PVC pipes of 6 kg/cm2 (supreme/Price) or other ISI approved including joining, fitting and fixing with clamps etc.as necessary complete at all levels including below G.L as directed and specified.\n(a) In Exposed Surface or in Trenches.\ni. 160mm dia.	item287	3935	Each
286	286	Supplying, fitting and fixing PVC pipes of 6 kg/cm2 (supreme/Price) or other ISI approved including joining, fitting and fixing with clamps etc.as necessary complete at all levels including below G.L as directed and specified.\n(a) In Exposed Surface or in Trenches.\nii. 110mm dia	item288	23116	Each
287	287	Supplying, fitting and fixing PVC pipes of 6 kg/cm2 (supreme/Price) or other ISI approved including joining, fitting and fixing with clamps etc.as necessary complete at all levels including below G.L as directed and specified.\n(a) In Exposed Surface or in Trenches.\niv. 75mm dia	item289	5140	Each
288	288	Supplying, fitting and fixing PVC pipes of 6 kg/cm2 (supreme/Price) or other ISI approved including joining, fitting and fixing with clamps etc.as necessary complete at all levels including below G.L as directed and specified.\n(a) In Exposed Surface or in Trenches.\nv. 63mm dia	item290	1496	Each
289	289	Supplying, fitting and fixing PVC pipes of 6 kg/cm2 (supreme/Price) or other ISI approved including joining, fitting and fixing with clamps etc.as necessary complete at all levels including below G.L as directed and specified.\n(a) In Exposed Surface or in Trenches.\nvi. 50mm dia	item291	2654	Each
290	290	(b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\ni. 160mm dia.	item292	320	Each
291	291	(b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\nii. 110mm dia	item293	1038	Each
292	292	(b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\niv. 75mm dia	item294	479	Each
293	293	(b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\nv. 63mm dia	item295	670	Each
294	294	(b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\nvi. 50mm dia	item296	503	Each
295	295	Supplying fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.Las directed and specified .\n(a) In Exposed Surface or in Trenches.\ni. 160mm dia.	item297	670	Each
296	296	Supplying fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.Las directed and specified .\n(a) In Exposed Surface or in Trenches.\nii. 110mm dia	item298	1323	Each
297	297	Supplying fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.Las directed and specified .\n(a) In Exposed Surface or in Trenches.\niv. 75mm dia	item299	479	Each
298	298	Supplying fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.Las directed and specified .\n(a) In Exposed Surface or in Trenches.\nv.50mm dia	item300	492	Each
299	299	(b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\ni. 160mm dia.	item301	194	Each
300	300	(b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\nIi. 110mm dia	item302	255	Each
301	301	(b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\niv. 75mm dia	item303	222	Each
302	302	(b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\nv. 50mm dia	item304	374	Each
303	303	Supplying fitting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.Las directed and specified .\n(a) In Exposed Surface or in Trenches.\nii. 110mm dia	item305	738	Each
304	304	(b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\nii. 110mm dia	item306	187	Each
305	305	Supplying fitting and fixing 45 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.Las directed and specified .\n(a) In Exposed Surface or in Trenches.\ni. 160mm dia.	item307	300	Each
306	306	Supplying fitting and fixing 45 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.Las directed and specified .\n(a) In Exposed Surface or in Trenches.\nii. 110mm dia	item308	632	Each
307	307	Supplying fitting and fixing 45 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.Las directed and specified .\n(a) In Exposed Surface or in Trenches.\niv. 75mm dia	item309	372	Each
308	308	Supplying fitting and fixing 45 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.Las directed and specified .\n(a) In Exposed Surface or in Trenches.\nv. 50mm dia	item310	374	Each
309	309	Supplying fitting and fixing PVC plain single tee of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.Las directed and specified .\n(a) In Exposed Surface or in Trenches.\ni. 160mm dia.	item311	469	Each
310	310	Supplying fitting and fixing PVC plain single tee of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.Las directed and specified .\n(a) In Exposed Surface or in Trenches.\nii. 110mm dia	item312	2809	Each
311	311	Supplying fitting and fixing PVC plain single tee of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.Las directed and specified .\nIn Exposed Surface or in Trenches.\niv. 75 mm dia.	item313	741	Each
312	312	(b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\ni. 160mm dia.	item314	60	Each
313	313	(b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\nii. 110mm dia	item315	219	Each
314	314	(b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\niv. 75 mm dia.	item316	55	Each
315	315	Supplying fitting and fixing PVC plain single tee with door of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified .\n(a)In Exposed Surface or in Trenches.\ni. 160mm dia	item317	104	Each
316	316	Supplying fitting and fixing PVC plain single tee with door of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified .\n(a) In Exposed Surface or in Trenches.\nii. 110mm dia	item318	3070	Each
317	317	(b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\ni. 160mm dia	item319	90	Each
318	318	(b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\nIi. 110mm dia	item320	64	Each
319	319	Supplying fitting and fixing PVC plain single Y of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.\n(a) In Exposed Surface or in Trenches.\ni. 160mm dia.	item321	134	Each
320	320	Supplying fitting and fixing PVC plain single Y of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.\n(a) In Exposed Surface or in Trenches.\nii. 110mm dia	item322	2524	Each
321	321	Supplying fitting and fixing PVC plain single Y of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.\n(a) In Exposed Surface or in Trenches.\niv. 75 mm dia.	item323	289	Each
322	322	(b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\ni. 160mm dia.	item324	40	Each
323	323	(b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\nIi. 110mm dia	item325	208	Each
324	324	(b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\niv. 75 mm dia.	item326	33	Each
325	325	Supplying fitting and fixing PVC plain single Y with door of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified .\n(a) In Exposed Surface or in Trenches.\ni. 110mm dia	item327	832	Each
326	326	(b)Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\ni. 110mm dia	item328	398	Each
327	327	Supplying fitting and fixing PVC coupler of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified .\n(a) In Exposed Surface or in Trenches.\ni. 110mm dia	item329	9914	Each
328	328	Supplying fitting and fixing PVC coupler of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified .\n(a) In Exposed Surface or in Trenches.\nii. 75mm dia	item330	2304	Each
329	329	Supplying fitting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified .\n(a) In Exposed Surface or in Trenches.\ni. 160mmx110mm	item331	137	Each
330	330	Supplying fitting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified .\n(a) In Exposed Surface or in Trenches.\nii. 110mmx75mm	item332	1244	Each
331	331	Supplying fiting and fixing PVC reducing Tee with door of (Supreme/Prince) or other ISI approved including joinning, fitting and fixing etc. in exposed surface or trenches as necessry complete at all levels including below G.L as directed and specified.\ni. 160mmx110mm	item333	37	Each
332	332	Supplying fiting and fixing PVC socket plug of (Supreme/Prince) or other ISI approved including joinning, fitting and fixing etc. in exposed surface or trenches as necessry complete at all levels including below G.L as directed and specified.\n(a) 110mm	item334	929	Each
333	333	Supplying fiting and fixing PVC socket plug of (Supreme/Prince) or other ISI approved including joinning, fitting and fixing etc. in exposed surface or trenches as necessry complete at all levels including below G.L as directed and specified.\n(b) 75mm	item335	174	Each
334	334	Supplying fiting and fixing PVC cleaning pipe of (Supreme/Prince) or other ISI approved including joinning, fitting and fixing etc. in exposed surface or trenches as necessry complete at all levels including below G.L as directed and specified.\n(a) 160mm	item336	80	Each
335	335	Supplying fiting and fixing PVC cleaning pipe of (Supreme/Prince) or other ISI approved including joinning, fitting and fixing etc. in exposed surface or trenches as necessry complete at all levels including below G.L as directed and specified.\n(b) 110mm	item337	429	Each
336	336	Providing fitting and fixing PVC of cowel of ISI make complete as directed and specified .\ni. 110mm dia . PVC cowel of ISI make	item338	405	Each
337	337	Providing fitting and fixing PVC of cowel of ISI make complete as directed and specified .\nIi. 75mm dia . PVC cowel of ISI make	item339	149	Each
338	338	C.P. Grating.\ni. 160mm	item340	128	Each
339	339	C.P. Grating.\nii. 110mm	item341	3181	Each
340	340	Providing and fixing uPVC P-Trap including setting with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 hand stone ballast 20 MM nominal size) the inlet from floor level to trap rim to be grouted and cemented neat manner including cutting and making good the floor & wall wherever requiredcomplete in all respects.\n110 mm inlet and 110 mm outlet.	item342	2435	Each
341	341	Providing and fixing cast brass clean out plug with suitable insert keys for opening, male threaded joint with PP/ uPVC female threaded socket caulked to PP/ uPVC pipe including cost of Solvent cement or Other Joint.\n100 mm dia	item343	1450	Each
342	342	Providing and fixing cast brass clean out plug with suitable insert keys for opening, male threaded joint with PP/ uPVC female threaded socket caulked to PP/ uPVC pipe including cost of Solvent cement or Other Joint.\n150 mm dia	item344	80	Each
343	343	Providing and fixing in position 110x63 mm OD uPVC reducing elbow including fix to floor with cement mortar.	item345	746	Each
344	344	Providing and fixing 110 mm OD uPVC inlet fitting/ Extension Piece with 2 or 3 inlets of 40 to 63 mm OD, fixed to uPVC trap with solvent cement joint and set in cement concrete as per drawing complete.	item346	2435	Each
345	345	Water Supply System\nSupplying fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes having thermal stability for hot and cold water supply including all CPVC Plain and bruss threaded fitting including clamps at 1.00 m spacing including joining of pipes and fitting with one step CPVC solvent cement and testing of joints complete at all levels as directed and spcified.\n(Note: Ball Valve and union will be charged extra and does not comes under Accessories).\n(i) In internal Wall - Exposed on Wall\n(b) 20 mm OD	item347	6225	Metre
346	346	Supplying fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes having thermal stability for hot and cold water supply including all CPVC Plain and bruss threaded fitting including clamps at 1.00 m spacing including joining of pipes and fitting with one step CPVC solvent cement and testing of joints complete at all levels as directed and spcified.\n(Note: Ball Valve and union will be charged extra and does not comes under Accessories).\ni. In internal Wall - Exposed on Wall\n(c) 25 mm OD	item348	1865	Metre
347	347	Supplying fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes having thermal stability for hot and cold water supply including all CPVC Plain and bruss threaded fitting including clamps at 1.00 m spacing including joining of pipes and fitting with one step CPVC solvent cement and testing of joints complete at all levels as directed and spcified.\n(Note: Ball Valve and union will be charged extra and does not comes under Accessories).\ni. In internal Wall - Exposed on Wall\n(d) 32mm OD	item349	1366	Metre
348	348	Supplying fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes having thermal stability for hot and cold water supply including all CPVC Plain and bruss threaded fitting including clamps at 1.00 m spacing including joining of pipes and fitting with one step CPVC solvent cement and testing of joints complete at all levels as directed and spcified.\n(Note: Ball Valve and union will be charged extra and does not comes under Accessories).\ni. In internal Wall - Exposed on Wall\n(e) 40 mm OD	item350	700	Metre
349	349	Supplying fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes having thermal stability for hot and cold water supply including all CPVC Plain and bruss threaded fitting including clamps at 1.00 m spacing including joining of pipes and fitting with one step CPVC solvent cement and testing of joints complete at all levels as directed and spcified.\n(Note: Ball Valve and union will be charged extra and does not comes under Accessories).\ni. In internal Wall - Exposed on Wall\n(f) 50 mm OD	item351	489	Metre
350	350	Suppling fitting and fixing G.I pipes of following sizes, with all necessary 'R' brand or similar approved G.I. fittings such as bend,tee,elbow, reducer,nipple,plug,long screw fitting,H.W. clamps etc. complete at all levels including below G.L as directed and specified.\n(A) Exposed on Walls\n(a) 50 mm dia (medium)\ni. Using Tata make	item352	3614	RM
351	351	Suppling fitting and fixing G.I pipes of following sizes, with all necessary 'R' brand or similar approved G.I. fittings such as bend,tee,elbow, reducer,nipple,plug,long screw fitting,H.W. clamps etc. complete at all levels including below G.L as directed and specified.\n(A) Exposed on Walls\n(b) 40 mm dia (medium)\ni. Using Tata make	item353	2310	RM
352	352	Suppling fitting and fixing G.I pipes of following sizes, with all necessary 'R' brand or similar approved G.I. fittings such as bend,tee,elbow, reducer,nipple,plug,long screw fitting,H.W. clamps etc. complete at all levels including below G.L as directed and specified.\n(A) Exposed on Walls\n(c) 32 mm dia (medium)\ni. Using Tata make	item354	1874	RM
353	353	Suppling fitting and fixing G.I pipes of following sizes, with all necessary 'R' brand or similar approved G.I. fittings such as bend,tee,elbow, reducer,nipple,plug,long screw fitting,H.W. clamps etc. complete at all levels including below G.L as directed and specified.\n(A) Exposed on Walls\n(d) 25 mm dia (medium)\ni. Using Tata make	item355	1696	RM
354	354	Suppling fitting and fixing G.I pipes of following sizes, with all necessary 'R' brand or similar approved G.I. fittings such as bend,tee,elbow, reducer,nipple,plug,long screw fitting,H.W. clamps etc. complete at all levels including below G.L as directed and specified.\n(A) Exposed on Walls\n(e) 20 mm dia (medium)\ni. Using Tata make	item356	1153	RM
355	355	Providing and fixing Chlorinated polyvinyle Chlorinated polyvinyle chloride (CPVC)Pipes, having thermal stability for hot and cold water supply including all CPVC plain with brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing .This includes jointig of pipes.\n(B) Concealed pipe with cutting chase & making good the walls\n(a) 15 mm OD	item357	10989	RM
356	356	Providing and fixing Chlorinated polyvinyle Chlorinated polyvinyle chloride (CPVC)Pipes, having thermal stability for hot and cold water supply including all CPVC plain with brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing .This includes jointig of pipes.\n(B) Concealed pipe with cutting chase & making good the walls\n(b) 20 mm OD	item358	10834	RM
357	357	Providing and fixing Chlorinated polyvinyle Chlorinated polyvinyle chloride (CPVC)Pipes, having thermal stability for hot and cold water supply including all CPVC plain with brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing .This includes jointig of pipes.\n(B) Concealed pipe with cutting chase & making good the walls\n(c) 25 mm OD	item359	4339	RM
358	358	Providing and fixing Chlorinated polyvinyle Chlorinated polyvinyle chloride (CPVC)Pipes, having thermal stability for hot and cold water supply including all CPVC plain with brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing .This includes jointig of pipes.\n(B) Concealed pipe with cutting chase & making good the walls\n(d) 32mm OD	item360	648	RM
359	359	Providing and fixing Chlorinated polyvinyle Chlorinated polyvinyle chloride (CPVC)Pipes, having thermal stability for hot and cold water supply including all CPVC plain with brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing .This includes jointig of pipes.\n(B) Concealed pipe with cutting chase & making good the walls\n(e) 40 mm OD	item361	578	RM
360	360	Providing and fixing Chlorinated polyvinyle Chlorinated polyvinyle chloride (CPVC)Pipes, having thermal stability for hot and cold water supply including all CPVC plain with brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing .This includes jointig of pipes.\n(B) Concealed pipe with cutting chase & making good the walls\n(f) 50 mm OD	item362	543	RM
361	361	Supplying fitting and fixing pipes with all necessary fitings in exposed or in treches including trenching and refilling the same etc complete as directed.\n(A) G.I pipe with GI fitting\n(a) TATA / SAIL (Medium)\niii. 25mm diameter	item363	11	Rm
362	362	Supplying fitting and fixing pipes with all necessary fitings in exposed or in treches including trenching and refilling the same etc complete as directed.\n(A) G.I pipe with GI fitting\n(a) TATA / SAIL (Medium)\niv. 32 mm diameter	item364	280	Rm
363	363	Supplying fitting and fixing pipes with all necessary fitings in exposed or in treches including trenching and refilling the same etc complete as directed.\n(A) G.I pipe with GI fitting\n(a) TATA / SAIL (Medium)\nv. 40 mm diameter	item365	305	Rm
364	364	Supplying fitting and fixing pipes with all necessary fitings in exposed or in treches including trenching and refilling the same etc complete as directed.\n(A) G.I pipe with GI fitting\n(a) TATA / SAIL (Medium)\nvi. 50mm diameter	item366	630	Rm
365	365	Supplying fitting and fixing pipes with all necessary fitings in exposed or in treches including trenching and refilling the same etc complete as directed.\n(A) G.I pipe with GI fitting\n(a) TATA / SAIL (Medium)\nvii. 65mm diameter	item367	4643	Rm
366	366	Supplying fitting and fixing pipes with all necessary fitings in exposed or in treches including trenching and refilling the same etc complete as directed.\n(A) G.I pipe with GI fitting\n(a) TATA / SAIL (Medium)\nviii. 80mm diameter	item368	3886	Rm
367	367	Supplying fitting and fixing pipes with all necessary fitings in exposed or in treches including trenching and refilling the same etc complete as directed.\n(A) G.I pipe with GI fitting\n(a) TATA / SAIL (Medium)\nix. 100 mm diameter	item369	3360	Rm
368	368	Supplying fitting and fixing pipes with all necessary fitings in exposed or in treches including trenching and refilling the same etc complete as directed.\nG.I pipe with GI fitting\nTATA / SAIL (Medium)\n150 mm diameter	item370	470	Rm
369	369	Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :\nWith common burnt clay F.P.S.(non modular) bricks of class designation 7.5	item371	13	Each
370	370	Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :\nWith common burnt clay F.P.S.(non modular) bricks of class designation 7.5	item372	3	Each
371	371	Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :\n20 mm dia nominal bore	item373	1153	Metre
372	372	Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :\n25 mm dia nominal bore	item374	1696	Metre
373	373	Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :\n32 mm dia nominal bore	item375	1874	Metre
374	374	Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :\n40 mm dia nominal bore	item376	2310	Metre
375	375	Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :\n50 mm dia nominal bore	item377	3259	Metre
376	376	Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :\n65 mm dia. nominal bore	item378	4393	Metre
377	377	Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :\n80 mm dia. nominal bore	item379	3028	Metre
378	378	Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :\n100 mm dia. nominal bore	item380	2225	Metre
379	379	Painting G.I. pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality.\n25mm diameter	item381	10	Metre
380	380	Painting G.I. pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality.\n32 mm diameter	item382	280	Metre
381	381	Painting G.I. pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality.\n40 mm diameter	item383	305	Metre
382	382	Painting G.I. pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality.\n50mm diameter	item384	330	Metre
383	383	Painting G.I. pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality.\n65mm diameter	item385	4643	Metre
384	384	Painting G.I. pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality.\n80 mm dia. nominal bore	item386	3828	Metre
385	385	Painting G.I. pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality.\n100 mm dia. nominal bore	item387	3275	Metre
386	386	Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :\n25 mm dia nominal bore	item388	20	Metre
387	387	Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :\n32 mm dia nominal bore	item389	175	Metre
388	388	Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :\n40 mm dia nominal bore	item390	195	Metre
389	389	Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :\n50 mm dia nominal bore	item391	260	Metre
390	390	Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :\n65 mm dia nominal bore	item392	310	Metre
391	391	Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :\n80 mm dia. nominal bore	item393	840	Metre
392	392	Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :\n100 mm dia. nominal bore	item394	1090	Metre
393	393	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :\n20mm nominal bore	item395	972	Each
394	394	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :\n25mm nominal bore	item396	217	Each
395	395	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :\n32mm nominal bore	item397	277	Each
396	396	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :\n40mm nominal bore	item398	146	Each
397	397	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :\n50mm nominal bore	item399	142	Each
398	398	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :\n65mm nominal bore	item400	57	Each
399	399	Butterfly valve (manual) with C.I body SS disc nitrile sheet & O ring & PN 16 Pressure rating as specified .\n65 mm dia	item401	68	Each
400	400	Butterfly valve (manual) with C.I body SS disc nitrile sheet & O ring & PN 16 Pressure rating as specified .\n80 mm dia	item402	47	Each
401	401	Butterfly valve (manual) with C.I body SS disc nitrile sheet & O ring & PN 16 Pressure rating as specified .\n100 mm dia	item403	20	Each
402	402	Supplying and fixing in position of approved quality Solenoid Valve with by-pass arrangement, isolation cock etc. complete with all required accessories such as level sensor, level indicator, level controller and required cabling for the same.\n25 mm dia	item404	10	Each
403	403	Supplying and fixing in position of approved quality Solenoid Valve with by-pass arrangement, isolation cock etc. complete with all required accessories such as level sensor, level indicator, level controller and required cabling for the same.\n32 mm dia	item405	19	Each
404	404	Supplying and fixing in position of approved quality Solenoid Valve with by-pass arrangement, isolation cock etc. complete with all required accessories such as level sensor, level indicator, level controller and required cabling for the same.\n40 mm dia	item406	21	Each
405	405	Supplying and fixing in position of approved quality Solenoid Valve with by-pass arrangement, isolation cock etc. complete with all required accessories such as level sensor, level indicator, level controller and required cabling for the same.\n50 mm dia	item407	12	Each
406	406	Supplying and fixing in position of approved quality Solenoid Valve with by-pass arrangement, isolation cock etc. complete with all required accessories such as level sensor, level indicator, level controller and required cabling for the same.\n65 mm dia	item408	6	Each
407	407	Supplying and fixing in position of approved quality Solenoid Valve with by-pass arrangement, isolation cock etc. complete with all required accessories such as level sensor, level indicator, level controller and required cabling for the same.\n80 mm dia	item409	6	Each
408	408	Supplying and fixing in position of approved quality Solenoid Valve with by-pass arrangement, isolation cock etc. complete with all required accessories such as level sensor, level indicator, level controller and required cabling for the same.\n100 mm dia	item410	6	Each
409	409	Providing and fixing Thermoflex or Kaiflex thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including protection by wrapping with 24 gauge alumminium sheet with riveted screw joints all required accessories complete as per specification.\n13 mm thick (Exposed Pipes)\nFor 20 mm dia Pipe	item411	1657	Metre
410	410	Providing and fixing Thermoflex or Kaiflex thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including protection by wrapping with 24 gauge alumminium sheet with riveted screw joints all required accessories complete as per specification.\n13 mm thick (Exposed Pipes)\nFor 25 mm dia Pipe	item412	1019	Metre
411	411	Providing and fixing Thermoflex or Kaiflex thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including protection by wrapping with 24 gauge alumminium sheet with riveted screw joints all required accessories complete as per specification.\n13 mm thick (Exposed Pipes)\nFor 32 mm dia Pipe	item413	634	Metre
412	412	Providing and fixing Thermoflex or Kaiflex thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including protection by wrapping with 24 gauge alumminium sheet with riveted screw joints all required accessories complete as per specification.\n13 mm thick (Exposed Pipes)\nFor 40 mm dia Pipe	item414	604	Metre
413	413	Providing and fixing Thermoflex or Kaiflex thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including protection by wrapping with 24 gauge alumminium sheet with riveted screw joints all required accessories complete as per specification.\n13 mm thick (Exposed Pipes)\nFor 50 mm dia Pipe	item415	655	Metre
414	414	Providing and fixing Thermoflex or Kaiflex thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including protection by wrapping with 24 gauge alumminium sheet with riveted screw joints all required accessories complete as per specification.\n13 mm thick (Exposed Pipes)\nFor 65 mm dia Pipe	item416	1165	Metre
415	415	Providing and fixing Thermoflex or Kaiflex thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including protection by wrapping with 24 gauge alumminium sheet with riveted screw joints all required accessories complete as per specification.\n13 mm thick (Exposed Pipes)\nFor 80 mm dia Pipe	item417	1350	Metre
416	416	Providing and fixing Thermoflex or Kaiflex thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including protection by wrapping with 24 gauge alumminium sheet with riveted screw joints all required accessories complete as per specification.\n13 mm thick (Exposed Pipes)\nFor 100 mm dia Pipe	item418	60	Metre
417	417	Providing and fixing forged brass single acting air release valve with screwed inlet 25 mm dia.	item419	6	Each
418	418	Providing and fixing M.S fabricated hot dipped galvanized coating puddle flange comprising of 600 mm dia long M.S class 'B' pipe (screwed end up to 50 mm & flange for more than 50 mm dia) with 6 mm thick M.S plates of required size including cutting holes in centre of plate, inserting pipe & making welded (Arc) joint complete. Same shall be installed with TEC welded joint in position with reinforcement bars of RCC tank wall/slab including making cutout in shuttering during concrete casting of tank of following diameter. (Location: Underground / Overhead Tanks.)\n25mm dia pipe, 600mm long with size of 250x250x6 mm MS plate	item420	8	Each
419	419	Providing and fixing M.S fabricated hot dipped galvanized coating puddle flange comprising of 600 mm dia long M.S class 'B' pipe (screwed end up to 50 mm & flange for more than 50 mm dia) with 6 mm thick M.S plates of required size including cutting holes in centre of plate, inserting pipe & making welded (Arc) joint complete. Same shall be installed with TEC welded joint in position with reinforcement bars of RCC tank wall/slab including making cutout in shuttering during concrete casting of tank of following diameter. (Location: Underground / Overhead Tanks.)\n32mm dia pipe, 600mm long with size of 250x250x6 mm MS plate	item421	22	Each
420	420	Providing and fixing M.S fabricated hot dipped galvanized coating puddle flange comprising of 600 mm dia long M.S class 'B' pipe (screwed end up to 50 mm & flange for more than 50 mm dia) with 6 mm thick M.S plates of required size including cutting holes in centre of plate, inserting pipe & making welded (Arc) joint complete. Same shall be installed with TEC welded joint in position with reinforcement bars of RCC tank wall/slab including making cutout in shuttering during concrete casting of tank of following diameter. (Location: Underground / Overhead Tanks.)\n40mm dia pipe, 600mm long with size of 300x300x6 mm MS plate	item422	22	Each
421	421	Providing and fixing M.S fabricated hot dipped galvanized coating puddle flange comprising of 600 mm dia long M.S class 'B' pipe (screwed end up to 50 mm & flange for more than 50 mm dia) with 6 mm thick M.S plates of required size including cutting holes in centre of plate, inserting pipe & making welded (Arc) joint complete. Same shall be installed with TEC welded joint in position with reinforcement bars of RCC tank wall/slab including making cutout in shuttering during concrete casting of tank of following diameter. (Location: Underground / Overhead Tanks.)\n50mm dia pipe, 600mm long with size of 350x350x6 mm MS plate	item423	70	Each
422	422	Providing and fixing M.S fabricated hot dipped galvanized coating puddle flange comprising of 600 mm dia long M.S class 'B' pipe (screwed end up to 50 mm & flange for more than 50 mm dia) with 6 mm thick M.S plates of required size including cutting holes in centre of plate, inserting pipe & making welded (Arc) joint complete. Same shall be installed with TEC welded joint in position with reinforcement bars of RCC tank wall/slab including making cutout in shuttering during concrete casting of tank of following diameter. (Location: Underground / Overhead Tanks.)\n65mm dia pipe, 600mm long with size of 350x350x6 mm MS plate	item424	24	Each
423	423	Providing and fixing M.S fabricated hot dipped galvanized coating puddle flange comprising of 600 mm dia long M.S class 'B' pipe (screwed end up to 50 mm & flange for more than 50 mm dia) with 6 mm thick M.S plates of required size including cutting holes in centre of plate, inserting pipe & making welded (Arc) joint complete. Same shall be installed with TEC welded joint in position with reinforcement bars of RCC tank wall/slab including making cutout in shuttering during concrete casting of tank of following diameter. (Location: Underground / Overhead Tanks.)\n80mm dia pipe, 600mm long with size of 400x400x6 mm MS plate	item425	56	Each
424	424	Providing and fixing M.S fabricated hot dipped galvanized coating puddle flange comprising of 600 mm dia long M.S class 'B' pipe (screwed end up to 50 mm & flange for more than 50 mm dia) with 6 mm thick M.S plates of required size including cutting holes in centre of plate, inserting pipe & making welded (Arc) joint complete. Same shall be installed with TEC welded joint in position with reinforcement bars of RCC tank wall/slab including making cutout in shuttering during concrete casting of tank of following diameter. (Location: Underground / Overhead Tanks.)\n100mm dia pipe, 600mm long with size of 400x400x6 mm MS plate	item426	106	Each
425	425	Providing and fixing M.S fabricated hot dipped galvanized coating puddle flange comprising of 600 mm dia long M.S class 'B' pipe (screwed end up to 50 mm & flange for more than 50 mm dia) with 6 mm thick M.S plates of required size including cutting holes in centre of plate, inserting pipe & making welded (Arc) joint complete. Same shall be installed with TEC welded joint in position with reinforcement bars of RCC tank wall/slab including making cutout in shuttering during concrete casting of tank of following diameter. (Location: Underground / Overhead Tanks.)\n150mm dia pipe, 600mm long with size of 450x450x6 mm MS plate	item427	12	Each
426	426	Solar Water Heating System (FOR TB HOSPITAL) :\nSupply, installion, testing and commissioning of Hot Water Generation Plant with Packaged type Air to Water Heat Pump. These units shall be completely factory assembled including 2 Nos. Scroll Hermatically Sealed Scroll Compressor(s), evaporator, Condenser and Microprocessor Control Panel etc with R410 Referigerant and COP between 3-4. The Heat Pump shall have inbuilt hot water heat exchanger, pumps, valves. expansion valve, integrated CIP system and other accessories.The Heat Pump should be capable of producing hot water at minimum 60°C temperaure at outlet (condenser circuit) temperatures at 10°C ?T. The Machine should have an operating ambient temperature range of 5°C to 40°C. Location: Terrace Level.\na. Built in electric panel as per safety norms as manufacturer standard.\nb. All other mountings, fittings & controls with all accessories and safeties\nc. All other mounting, fittings and controls.\nd. Suitable for electric supply of 415 + 10% volts & 50 Hz.\ne. All interconnecting wiring / cabling between heat pump and electrical panel.\nf. The Heat pump shall have an in-built facility to start / stop depending on variation in demand at different periods.\ng. System shall be complete with SS 304 Tank of 2 Hrs Storage Capacity, Primary and Seconary Circualtion pumps, Heat Exchangers, Return Recirculation Pump, interconnecting piping, valves and all accessories as required.\nh. System shall have 20% of total capacity in electrical heating as standby.\ni. System shall have an integrated Solar Heating system with 20% of total capacity for energy saving including Flat Plate Solar Panels, Mixing Tanks, Recirculation Pumps, etc\nFor Hospital\nHeating capacity : Approx. 150 KW (4 working + 1 standby) For Hospital\nHot Water Storage Tank : 11000 Ltrs\nSystem as Described Above	item428	2	Set
427	427	For Solar Water Heating System-500 LPD\nProviding and fixing Solar Hot Water indirect Heating System using heating liquid medium comprising of flat plate solar panels, including all interconnecting insulated G.I. piping, pressure type insulated hot water tank, , outlet, Y stainer and a water meter on the inlet, air release valve all mounted on galvanized MS sections complete with connection with the existing piping. Comparising of following:-\nFive Nos of. flat plate solar collector panels of 10 Sqm size approx. the panels enclosed in insulated collector boxes with single piece toughned glass 4 mm thick and fixed with heat resistant gasket.\nOne Lot of Inter-connected insulated G.I. piping insulated with 9 mm thick nitrile rubber heat resitant insulation sections ( Vidoflex or equiv.) and valves with outer mechanical protection of aluminium sheet cladding.\nSolar Water Heating System as Describe Above	item429	19	Set
428	428	Solar Water Heating System (FOR MMCH HOSPITAL) :\nSupply, installion, testing and commissioning of Hot Water Generation Plant with Packaged type Air to Water Heat Pump. These units shall be completely factory assembled including 2 Nos. Scroll Hermatically Sealed Scroll Compressor(s), evaporator, Condenser and Microprocessor Control Panel etc with R410 Referigerant and COP between 3-4. The Heat Pump shall have inbuilt hot water heat exchanger, pumps, valves. expansion valve, integrated CIP system and other accessories.The Heat Pump should be capable of producing hot water at minimum 60°C temperaure at outlet (condenser circuit) temperatures at 10°C ?T. The Machine should have an operating ambient temperature range of 5°C to 40°C. Location: Terrace Level.\na. Built in electric panel as per safety norms as manufacturer standard.\nb. All other mountings, fittings & controls with all accessories and safeties\nc. All other mounting, fittings and controls.\nd. Suitable for electric supply of 415 + 10% volts & 50 Hz.\ne. All interconnecting wiring / cabling between heat pump and electrical panel.\nf. The Heat pump shall have an in-built facility to start / stop depending on variation in demand at different periods.\ng. System shall be complete with SS 304 Tank of 2 Hrs Storage Capacity, Primary and Seconary Circualtion pumps, Heat Exchangers, Return Recirculation Pump, interconnecting piping, valves and all accessories as required.\nh. System shall have 20% of total capacity in electrical heating as standby.\ni. System shall have an integrated Solar Heating system with 20% of total capacity for energy saving including Flat Plate Solar Panels, Mixing Tanks, Recirculation Pumps, etc\nFor Hospital\nHeating capacity : Approx. 200 KW (4 working + 1 standby) For Hospital\nHot Water Storage Tank : 15000 Ltrs\nSystem as Described Above	item430	1	Set
429	429	Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.\n150 mm diameter	item431	2525	Metre
430	430	Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.\n200 mm diameter	item432	1010	Metre
431	431	Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.\n250 mm diameter	item433	540	Metre
432	432	Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :\n180 x 150mm size P-type\nWith Sewer bricks conforming to IS : 4885	item434	254	Each
433	433	Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :\nInside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610mm internal dimensiions total weight of cover and frame to be not less than 38 Kg. ( weight of cover 23 Kg. and weight of frame 15 Kg.), with FPS bricks with class designation 7.5.\nWith Sewer bricks conforming to IS : 4885	item435	255	Each
434	434	Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :\nWith Sewer bricks conforming to IS : 4885	item436	53	Each
435	435	Extra for depth for manholes:\nSize 90 x 80 cm\nWith Sewer bricks conforming to IS : 4885	item437	24	Metre
436	436	Size 120x90 cm\nWith Sewer bricks conforming to IS : 4885	item438	5	Metre
437	437	Constructing brick masonary circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1 :3:6 mix (1 cement : 3 coarse sand : 6 graded 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design:\n0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal diameter confirming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :\nWith Sewer bricks conforming IS : 4885	item439	50	Each
438	438	Extra depth for circular type manhole 0.91m internal dia (at bottom) with beyond 0.91m to 1.67m.\nWith Sewer bricks conforming IS : 4885	item440	13	Metre
439	439	Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :\n1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :\nWith Sewer bricks conforming IS : 4885	item441	18	Each
440	440	Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m :\nWith Sewer bricks conforming IS : 4885	item442	6	Metre
441	441	Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :\n2.30 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :\nWith Sewer bricks conforming IS : 4885	item443	8	Each
442	442	Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m :\nWith Sewer bricks conforming IS : 4885	item444	2	Metre
443	443	Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.	item445	1502	Each
444	444	Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :\nFor pipes 250 to 300 mm diameter	item446	2	Each
445	445	Providing and Installing Grease Separator EasyClean ground Standard NS 2\nBased on Euro-Norm EN 1825-1 Manufactured from Polyethylene. For underground installation, installation depth 550 - 950 mm, with integrated sludge trap, polymer upper section, vertically adjustable, rotatable and tiltable up to 5°, cast iron cover in load class B based on EN 124, odor tight.\nØ 110 in- and outlet according to DIN 19534\nSludge trap capacity: 200 l\nTotal separator capacity: 370 l\nFat storage: 120 l\nCertification: Z-54.1-440\nWeight: 120 kg\nDimension: 1470 x 1300 mm\nInspection chambers may be installed in a maximum of 500 mm groundwater.	item447	3	Each
446	446	Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :\n150 mm dia. R.C.C. pipe	item448	1335	Metre
447	447	Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :\n250 mm dia. R.C.C. pipe	item449	945	Metre
448	448	Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :\n300 mm dia. R.C.C. pipe	item450	450	Metre
449	449	Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :\n450 mm dia. R.C.C. pipe	item451	400	Metre
450	450	Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :\n600 mm dia. R.C.C. pipe	item452	280	Metre
451	451	Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :\n700 mm dia. R.C.C. pipe	item453	170	Metre
452	452	Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :\n800 mm dia. R.C.C. pipe	item454	50	Metre
453	453	Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :\n900 mm dia. R.C.C. pipe	item455	25	Metre
454	454	Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :\n1000 mm dia. R.C.C. pipe	item456	15	Metre
455	455	Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :\nInside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610mm internal dimensiions total weight of cover and frame to be not less than 38 Kg. ( weight of cover 23 Kg. and weight of frame 15 Kg.), with FPS bricks with class designation 7.5.\nWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5	item457	84	Each
456	456	Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :\nWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5	item458	15	Each
457	457	Extra for depth for manholes:\nSize 90 x 80 cm\nWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5	item459	9	Metre
458	458	Size 120x90 cm\nWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5	item460	5	Metre
459	459	Constructing brick masonary circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1 :3:6 mix (1 cement : 3 coarse sand : 6 graded 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design:\n0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal diameter confirming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :\nWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5	item461	18	Each
460	460	Extra depth for circular type manhole 0.91m internal dia (at bottom) with beyond 0.91m to 1.67m.\nWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5	item462	1	Metre
461	461	Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :\n1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :\nWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5	item463	9	Each
462	462	Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m :\nWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5	item464	1	Metre
463	463	Constructing bricks masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :\nWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5	item465	173	Each
464	464	Extra for depth beyond 45 cm of brick masonry chamber\nFor 455x610 mm size\nWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5	item466	38	Metre
465	465	Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.\nHD-20 circular shape 560 mm internal diameter.	item467	28	Each
466	466	Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below ground level.\nAll types of soil\n400 mm dia.	item468	880	Metre
467	467	Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer –in-charge.\n200 mm nominal size dia.	item469	660	Metre
468	468	Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.	item470	220	Metre
469	469	Supplying, filling, spreading & levelling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.	item471	140	Cum
470	470	Supplying, filling, spreading & levelling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.	item472	210	Cum
471	471	Supplying, filling, spreading & levelling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer –in-charge.	item473	140	Cum
472	472	Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.	item474	248	Cum
473	473	Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \"V\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.	item475	432	Hours
474	474	Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:\n200 mm dia	item476	60	Each
475	475	Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.\n200 mm Clamp.	item477	32	Each
476	476	Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer –in-charge, beyond 90 metre & upto 150 metre depth below ground level.\nAll types of soil\n400 mm dia	item478	80	Metre
477	477	Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).\n200 mm dia	item479	4	Each
478	478	Providing and fixing 80 mm dia. GI pipes complete (IS:1239 Heavy Class) with GI fittings and clamps including MS pipe supports, enamel paint as per specifications cutting and making good the walls etc. complete.	item480	370	Metre
479	479	Supply, Lowering, installation & testing of KSB make submersible pumping set with 7.5 HP motor 4 stage pump suitable for 20/26/30/38/40/45/50 m3 hr. at 42/38/36/32/29/25/20 mtr. Head respectively. With Three Phase. (Model: 273/4)	item481	4	Each
480	480	Providing & fixing cable 6 sq.mm. From submersible pump to panel board.	item482	400	Metre
481	481	Providing & fixing Panel Board for submersible pump fitted with DOL starter ammeter, voltmeter single phase preventer standard/indo/cop make MCB of off switch push bottom duly wired and made out of 16/18 SWG sheet.	item483	4	Each
482	482	Non - return valve with dual plate of CI Body SS plates vulcanized NBR seal flanged end & PN 16 rating as specified.\n80 mm dia.	item484	8	Each
483	483	Sewage Treatment Plant 450 KLD ( SBR Technology ) for TB Hospital\nNote : All Civil Works with Structural Walk Ways/ Railings, General Lighting and Ventilation to be Done by Client/Owner.\nDesign, Supplying, of Sewage Treatment Plant capacity 450 KLD .(excluding excavation, back filling & disposal of surplus earth /Civil construction work) for the following duty:\nNature of effluent - Office Building Sewage from Toilet use , kitchen waste and other areas of office buildings.\nIncoming parameters:\npH - 6 - 8.5\nBOD5 - upto 250-350 Mg/L\nS. Solids - 250 - 400 Mg/L\nCOD - upto 450-600 Mg/L\nOil & Grease - 50-100 Mg / L\nFinal effluent discharge standard after treatment\npH - 6.0 - 8 After UF 6-8\nBOD5 - Less than 10 Mg/L After UF <4\nS. Solids - Less than 30 Mg/L After UF <2\nCOD - Less than 60 Mg/L After UF <30\nOil & Grease - Less than 5 Mg/L After UF <Nil\n\nSupply of 2 Nos Manual Stainless Steel Bar Screen with suitable lifting arrangement for required sizes (size 1000 mm wide x 1000 mm high) approx. (Item for Both the STP)	item485	4	Nos
484	484	Supply, installation, testing & commissioning of Mechanical roto brush Fine Screen having 3 mm opening. (Item for Both the STP)	item486	2	Set
485	485	Supply, installation, testing & commissioning of electronic type level indicator and controller for automatic operation of the system with high/low level alarm complete with auxiliary NO/NC contacts.\n(Item for Both the STP)	item487	2	Each
486	486	Supply, installation, testing & commissioning of non clog open impeller type pumps, having CI casing & CI impeller complete with all accessories, motor of required capacity. Delivery header with isolation valve and NRV, lifting arrangement, pressure gauge on delivery line with isolation cock level controller with wiring to control the level of sump automatically. Pump shall have following duty for reference and vendor to confirm on design base.\nSubmersible Sewage Transfer Pumps 2 Nos. (1 Working + 1 Standby )\n(Solid Handling Cap. 35 mm)\nFlow rate (each) = 25 M3 / Hr\nHead = 10 Mtr\n	item488	1	Set
487	487	Supply, installation, testing & commissioning of non clogging submersible type Return Activated Sludge Pumps and Secondary Activated pumps(RAS and SAS Pumps) having CI casing & CI impeller complete with and foundation bolt and lifting arrangement with all accessories, motor of required capacity. pressure gauge on delivery line with isolation cock, level controller to control the level of sump automatically. Pumps shall have following duty: Pumps 2 Nos. (1 Working + 1 Standby )\n(Solid handling cap. 8.5 mm)\nFlow rate (each) = 15m3 / hr\nHead = 12 Mtr\nCost shall be inclusive of PVC flexible Hose pipe ( for piping submerged in effluent) with M S epoxy piping (for piping non-submerged in effluent)	item489	1	Set
488	488	Provision of guide ropes to guide submersible pump from upper level to operational level in sump basin with channels / angle section of MSEP shall be made by the STP contractor.\nAir diffusion system shall include the following:	item490	1	Lot
489	489	Twin type rotary air blowers 2 Nos. (1 W + 1 S) Capable of delivering 450 cum/hr (each) of free air at 0.6 kg/cm2 driven through “V” belt or directly coupled through flexible coupling to a TEFCmotor of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles a/c supply	item491	2	Each
490	490	Air piping shall comprise of pipes droppers/ laterals with M S (epoxy coated) Header complete with all fittings such as tees, crosses, plugs, sockets, elbows, reducers, supports & clamps, puddle flanges etc cutting chases & making good in Plant Room. All submerged piping will be SS-304	item492	1	Lot
491	491	Non clog type air dispersion system capable of handling 3-5 cfm of air with oxygen transfer efficiency of 3-4% per/meter water depth. Air dispersion grid shall be assembled in modular form so that they can be replaced / repaired Fine /coarse aeration bubble diffusers as required.\nFor equalization tank -1 Nos. (Item for Both the STP)	item493	2	Lot
492	492	Non clog type air dispersion system capable of handling 3-5 cfm of air with oxygen transfer efficiency of 3-4% per/meter water depth. Air dispersion grid shall be assembled in modular form so that they can be replaced / repaired Fine /coarse aeration bubble diffusers as required.\nFor sludge holding tank - 1 No. (Item for Both the STP)	item494	2	Lot
493	493	Non clog type air dispersion system capable of handling 3-5 cfm of air with oxygen transfer efficiency of 3-4% per/meter water depth. Air dispersion grid shall be assembled in modular form so that they can be replaced / repaired Fine /coarse aeration bubble diffusers as required.\nSBR reactor tank- 1 No. (Item for Both the STP)	item495	2	Lot
494	494	Air dispersion system shall be provided for Equalisation Tank, Sludge holding Tank and SBR reactor Tanks.\nSupply of all piping (as described below) and isolation control valves for making the system complete.\nSS 304 : Submerged air piping Make Jindal Steel Ltd.\nMS Epoxy : Air piping, Filters & other Eqp. Make: Jindal Hissar/Prakash Surya\nPVC piping ASTM SCH 40 :Pumped effluent & tank overflow pipe line.\n(Item for Both the STP)	item496	2	Job
495	495	Supplying of Submersible Mixer in Equalization Tank 1 Nos .\nCapacity :suitable for 450 M3/day plant\nMOC :CI\n	item497	3	Each
496	496	Supplyof motorized Moving Decanter to suit SBR tank with MOC SS-304 with scum guard and connected with ultrasonic level transmitter & ultrasonic level element for automatic control etc. complete as required.	item498	2	Each
497	497	Supply of multitube type disinfection system comprising of U.V and U.F Reactor in a close circuit chamber with required no of lamps as per detail design on flow conditions with auto dosing controller, display monitor as per manufacturers requirement complete in all respects\nFlow Rate = 25 M3 / Hr.	item499	1	Set
498	498	Supply of vertical inline multistage pumping set (Imported) with Stainless steel-304 body, Stainless steel-304 impeller, Stainless steel-304 casing, shaft of Stainless steel-316 and C.I. base & head with mechanical seal, connected to a TEFC induction motor suitable for 415+/- 10% volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundations, 80x40 mm I section base plate bolted to cement concrete foundations complete.Vendor to submit performance curves and technical catalogue of the proposed model for review and information.\nCapacity : 25 M3 / Hr\nHead : 25-30 M\nNo. of Pumps (1 working + 1 standby)	item500	1	Set
499	499	Note: Operation of pump shall be based on level controller proposed to be installed in tank as per site location. The contractor to ascertain the Head required for pumps as per site conditions and provide accordingly.\nSupply of MSEP vessel filter with all necessary accessories. Filter shall be suitable for minimum working pressure of 5 kg / cm2 and shall include media, standard fittings like pressure gauges, sampling cock, rinse drain, vacuum breaker etc. The MS sheet thickness for shell shall be min. 8 mm and for dishes shall 10 mm. The internal surfaces of tank shall be treated with epoxy coaing and external surface with primer and anticorrosive enamel paint (Min. 2 coats). with frontal piping shall be 100 mm dia MSEP along with valves PN 1.0, test cock, air inlet for back washing and pressure gauges at inlet and outlet.\nMultigrade Pressure Sand Filter\nFlow Rate = 25 M3 / Hr\nFiltration velocity : 15 Cum/Hr/Sqm\nFilter HOS : 1800 MM\nFilter Diameter : 1500 MM.	item501	1	Each
500	500	Supply of MSEP vessel filter with all necessary accessories. Filter shall be suitable for minimum working pressure of 5 kg / cm2 and shall include media, standard fittings like pressure gauges, sampling cock, rinse drain, vacuum breaker etc. The MS sheet thickness for shell shall be min. 8 mm and for dishes shall 10 mm. The internal surfaces of tank shall be treated with epoxy coaing and external surface with primer and anticorrosive enamel paint (Min. 2 coats). with frontal piping shall be 100 mm dia MSEP along with valves PN 1.0, test cock, air inlet for back washing and pressure gauges at inlet and outlet.\nActivated Carbon Filter\nFlow Rate = 25 M3 / Hr\nFiltration velocity : 15 Cum/Hr/Sqm\nFilter HOS : 1800 MM\nFilter Diameter : 1500 MM.	item502	1	Each
501	501	Supply of Filter Press of plate as required (size24\"x 24\" x 24 nos plate for reference) with screw feed pumps of 6 m3/hr with adequate head (1Working+1Standby) with interconnecting piping and poly dosing system all complete.\n(Item for Both the STP)	item503	2	Set
502	502	Supply of Magnetic flow meter suitable for 450 KLD Plant with preamplifier and microprocessor including necessary cabling, conduit, etc complete suitable for raw sewage application.	item504	1	Each
503	503	Electrical panel With PLC Control\nSupply of the PLC based control panel with interlocking arrangement with supply pumps, suction pumps, modulating or shut-off valves including necessary wiring, magnetic switches & sensors complete to make the system functional with following interlocking.\nConstruction: Compartmentalized Type Skid Mounted, MCC Cum PLC Control panel will be free standing; vertical, fabricated from CRCA steel sheet 14/16 G conforming to degree of protection IP-52 or better. Cable entry will be from bottom. Colour shade - RAL 7032.\nSystem Voltage: 380 to 410 Volts & 50HZ ( 415 V ±10% , AC, 50 HZ ±5% for India ). Surge protection to be provided at every applicable point.PLC: The Programmable Logic Controller [PLC] shall consist of a PLC hardware, with 16k (min) program memory shall be protected by a backup battery with further memory protection from an EEPROM.\nHMI: 5.5 Inch Colour Touch screen HMI, will be mounted on A Man-Machine Interface Terminal (MMI) shall be mounted on the front of the main control panel for control of the activated sludge plant. It will provide a display of the process parameters and equipment status. The display will have an associated keypad. The system will allow operator changes to set points and control of equipment. The terminal shall include an alarm annunciation with a dedicated alarm page and allow acknowledgment of alarms.	item505	1	Each
504	504	Motor Control Centre\nDesign, fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre shall be fabricated with reinforcement of suitable size angle iron, channel ‘T’ sections irons and/or flats wherever necessary. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels.\nIncoming\n400 amps TPN MCCB with the following accessories:\na. 0-500 volts 96 x 96 mm square electronic voltmeter with selector switch shall be protected by 2 amps TP MCB. 1 Set.\nc. Phase indicating lamps shall be protected by 2 amp SP MCB 3 Sets.\nBus Bar\n300 amps TPN (15 KA) copper bus bar with heat shrinkable insulation sleeves.\nRequired Nos of required capacity TPN MCB for direct on line starter/star delta starters and out going feeders to all the pumps/blowers etc. (including standbys). Each compartment shall contain auto / manual selector switch and indicating lamp with MCB’s for ‘ON/OFF/TRIP’ status of motor.\nSpare MCB’s of following capacities: 32 amps TPN MCB’s 3 Nos.\nAll MCCBs / MCBs shall be of 15 KA breaking capacity and suitable for motor duty application.\nAll motor starters shall be provided with Automatic level controller.\nDOL starters shall be used for mototrs below 10HP and Star-Delta Starters for other motors .\nProvision shall be made for providing potential free contacts to all pumps starters.	item506	1	Each
505	505	Supplying & Fixing of Cables , Conector, Cable Trays, to make Electrical Installation Complete. Necessary cable alleys, internal / cabling, wiring, cabling from MCC to various pumps / equipment and interlocking, earthing and earthing pits for all equipment	item507	1	Lot
506	506	Ultrafiltration System - 15 KL/Hr - For Generating 150 KL Water for Flushing\nUF Module (Hollow Fibre -outside in type porocity 0.1 to 0.01 micron) including micron cartridge filter in PP housing, Pneumatic Valve, PLC Electrical Panel, flow meter, compressor and all other accessories making the system complete.\nFlow rate : 15 cum/hr Output.\nInlet TSS :- 10-30 mg/lt.\nFiltration Flux :- 90 lt/m2/hr.\nMembrane Area - 128 M2 as per approved makes.\nMembrane MOC - PVDF / PES.\nMembrane Type :- Pressure Feed Mambrane 0.01-0.04 Micron rating type, Out to in process.\nNo. of UF Membrane - As Per Manufacturer .	item508	1	Set
507	507	UF Feed Pump\nCapacity 15 M3/hr each (1 W + 1 SB)\nHead 20-25 Mts\nRPM 2900	item509	1	Set
508	508	Supply, installation, testing & commissioning of UF pre fine filtration. It can be micron filter or Bag filter as per vendor design. The MOC of housing of filter shall be PP	item510	1	Set
509	509	Supplying, installing, testing, commissioning of centrifugal Vertical UF Backwash pumps with Complete SS - 304 with motor, pressure gauge with isolation cock, Isolation valve, NRV on delivery line. Isolation valve, strainer at suction. The pump shall be suitable for 415±10% volts 3 phase AC supply .\nCapacity : - 15 M³/h\nHead : - 18- 20 m\nNo. of Pumps: 1 No\nNote-CIP pumps can be common with item no.c	item511	1	Set
510	510	Supplying, Installation, testing and commissioning of chlorine dosing system compromising of Sintex Tank with inlet/ outlet connection, piping and valves alongwith metering pump of 6 LPH for dosing.\n(Item for Both the STP)	item512	2	Set
511	511	Supply, Installation, testing and commissioning of CEB / CIP dosing station including dosing tank, pumps complete in all respect as per UF memrbane specification requirement.\n(Item for Both the STP)	item513	2	Set
512	512	Supply installation commissioning of PLC control panel with all automation required like Pneumatic valves, piping in uPVC PLC and other required accessories.\n(Item for Both the STP)	item514	2	Set
513	513	MS epoxy coated skid for the complete plant.\n(Item for Both the STP)	item515	2	Set
514	514	Supply, installation & commissioning of HDPE backwash tank of 500 Litre capacity including required level controller inlet, outlet, overflow and drain connection.\n(Item for Both the STP)	item516	2	Set
515	515	Effluent Treatment Plant 50 KLD for TB Hospital\nDesign, Supplying, installing, testing & commissioning of Effluent Treatment Plant of 50 KLD (excluding excavation, back filling & disposal of surplus earth and Civil construction work) for the following duty:\nEffluent from OT Scrubs, blood bank, labs etc. Some solvent/ chemical waste originating typically from hospital complex shall also be discharged into the ETP. Design to take consideration of same.\nINLET EFFLUENT CHARACTERSTICS (ASSUMED)\nPH : 5.5 - 9.0\nBOD : 250 - 600 mg/l\nS. Solids : 200 - 650 Mg/l\nCOD : 600 - 1200 mg/l\nOil & Grease : 50 - 140 mg/L\nDesired Effluent Quality After Treatment\npH - 6.5 – 8.5\nBOD - Less than 150 Mg/L\nS. Solids - Less than or equal to 100 Mg/L\nCOD - Less than or equal to 300 Mg/L\nOil & Grease - Less than 5 Mg/L\nEffluent treatment plant shall include the following items:\nScreen Chamber\nEqualization tank/sump\nPrimary Tube Settler\nDosing System\nSludge Holding Tank\nUV System\nAir Blowers, Pumps & equipment\nPiping, valves etc\nClarified Water tank\nElectrical Panel & Cabling\nNote:\nContractor shall ensure submission of detailed GA drawings (Plan & Section), P&I diagram, schematic diagram for the above said component and additional component if so required for the complete working of the ETP for the full capacity.	item517	1	Set
516	516	Sewage Treatment Plant 650 KLD ( SBR Technology ) for MMCH Hospital\nNote : All Civil Works with Structural Walk Ways/ Railings, General Lighting and Ventilation to be Done by Client/Owner.\nDesign, Supplying, of Sewage Treatment Plant capacity 650 KLD .(excluding excavation, back filling & disposal of surplus earth /Civil construction work) for the following duty:\nNature of effluent - Office Building Sewage from Toilet use , kitchen waste and other areas of office buildings.\nIncoming parameters:\npH - 6 - 8.5\nBOD5 - upto 250-350 Mg/L\nS. Solids - 250 - 400 Mg/L\nCOD - upto 450-600 Mg/L\nOil & Grease - 50-100 Mg / L\nFinal effluent discharge standard after treatment\npH - 6.0 - 8 After UF 6-8\nBOD5 - Less than 10 Mg/L After UF <4\nS. Solids - Less than 30 Mg/L After UF <2\nCOD - Less than 60 Mg/L After UF <30\nOil & Grease - Less than 5 Mg/L After UF <Nil\n\nSupply, installation, testing & commissioning of non clog open impeller type pumps, having CI casing & CI impeller complete with all accessories, motor of required capacity. Delivery header with isolation valve and NRV, lifting arrangement, pressure gauge on delivery line with isolation cock level controller with wiring to control the level of sump automatically. Pump shall have following duty for reference and vendor to confirm on design base.\nSubmersible Sewage Transfer Pumps 2 Nos. (1 Working + 1 Standby )\n(Solid Handling Cap. 35 mm)\nFlow rate (each) = 35 M3 / Hr\nHead = 10 Mtr	item518	1	Set
517	517	Supply, installation, testing & commissioning of non clogging submersible type Return Activated Sludge Pumps and Secondary Activated pumps(RAS and SAS Pumps) having CI casing & CI impeller complete with and foundation bolt and lifting arrangement with all accessories, motor of required capacity. pressure gauge on delivery line with isolation cock, level controller to control the level of sump automatically. Pumps shall have following duty: Pumps 2 Nos. (1 Working + 1 Standby ).\n(Solid handling cap. 8.5 mm)\nFlow rate (each) = 25m3 / hr\nHead = 12 Mtr\nCost shall be inclusive of PVC flexible Hose pipe ( for piping submerged in effluent) with M S epoxy piping (for piping non-submerged in effluent)	item519	1	Set
518	518	Provision of guide ropes to guide submersible pump from upper level to operational level in sump basin with channels / angle section of MSEP shall be made by the STP contractor.\nAir diffusion system shall include the following:	item520	1	Lot
519	519	Twin type rotary air blowers 2 Nos. (1 W + 1 S) Capable of delivering 650 cum/hr (each) of free air at 0.6 kg/cm2 driven through “V” belt or directly coupled through flexible coupling to a TEFCmotor of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles a/c supply .	item521	2	Each
520	520	Air piping shall comprise of pipes droppers/ laterals with M S (epoxy coated) Header complete with all fittings such as tees, crosses, plugs, sockets, elbows, reducers, supports & clamps, puddle flanges etc cutting chases & making good in Plant Room. All submerged piping will be SS-304	item522	1	Lot
521	521	Supplying of Submersible Mixer in Equalization Tank 1 Nos .\nCapacity :suitable for 650 M3/day plant\nMOC :CI\n	item523	3	Each
522	522	Supplyof motorized Moving Decanter to suit SBR tank with MOC SS-304 with scum guard and connected with ultrasonic level transmitter & ultrasonic level element for automatic control etc. complete as required.	item524	2	Each
523	523	Supply of multitube type disinfection system comprising of U.V and U.F Reactor in a close circuit chamber with required no of lamps as per detail design on flow conditions with auto dosing controller, display monitor as per manufacturers requirement complete in all respects.\nFlow Rate = 35 M3 / Hr	item525	1	Set
524	524	Supply of vertical inline multistage pumping set (Imported) with Stainless steel-304 body, Stainless steel-304 impeller, Stainless steel-304 casing, shaft of Stainless steel-316 and C.I. base & head with mechanical seal, connected to a TEFC induction motor suitable for 415+/- 10% volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundations, 80x40 mm I section base plate bolted to cement concrete foundations complete.Vendor to submit performance curves and technical catalogue of the proposed model for review and information.\nCapacity : 35 M3 / Hr\nHead : 25-30 M\nNo. of Pumps (1 working + 1 standby)	item526	1	Set
525	525	Note: Operation of pump shall be based on level controller proposed to be installed in tank as per site location. The contractor to ascertain the Head required for pumps as per site conditions and provide accordingly.\nSupply of MSEP vessel filter with all necessary accessories. Filter shall be suitable for minimum working pressure of 5 kg / cm2 and shall include media, standard fittings like pressure gauges, sampling cock, rinse drain, vacuum breaker etc. The MS sheet thickness for shell shall be min. 8 mm and for dishes shall 10 mm. The internal surfaces of tank shall be treated with epoxy coaing and external surface with primer and anticorrosive enamel paint (Min. 2 coats). with frontal piping shall be 100 mm dia MSEP along with valves PN 1.0, test cock, air inlet for back washing and pressure gauges at inlet and outlet.\nMultigrade Pressure Sand Filter\nFlow Rate = 35 M3 / Hr\nFiltration velocity : 15 Cum/Hr/Sqm\nFilter HOS : 1800 MM\nFilter Diameter : 1700 MM.	item527	1	Each
526	526	Supply of MSEP vessel filter with all necessary accessories. Filter shall be suitable for minimum working pressure of 5 kg / cm2 and shall include media, standard fittings like pressure gauges, sampling cock, rinse drain, vacuum breaker etc. The MS sheet thickness for shell shall be min. 8 mm and for dishes shall 10 mm. The internal surfaces of tank shall be treated with epoxy coaing and external surface with primer and anticorrosive enamel paint (Min. 2 coats). with frontal piping shall be 100 mm dia MSEP along with valves PN 1.0, test cock, air inlet for back washing and pressure gauges at inlet and outlet.\nActivated Carbon Filter\nFlow Rate = 35 M3 / Hr\nFiltration velocity : 15 Cum/Hr/Sqm\nFilter HOS : 1800 MM\nFilter Diameter : 1700 MM.	item528	1	Each
527	527	Supply of Magnetic flow meter suitable for 650 KLD Plant with preamplifier and microprocessor including necessary cabling, conduit, etc complete suitable for raw sewage application.	item529	1	Each
528	528	Electrical panel With PLC Control\nSupply of the PLC based control panel with interlocking arrangement with supply pumps, suction pumps, modulating or shut-off valves including necessary wiring, magnetic switches & sensors complete to make the system functional with following interlocking.\nConstruction: Compartmentalized Type Skid Mounted, MCC Cum PLC Control panel will be free standing; vertical, fabricated from CRCA steel sheet 14/16 G conforming to degree of protection IP-52 or better. Cable entry will be from bottom. Colour shade - RAL 7032.\nSystem Voltage: 380 to 410 Volts & 50HZ ( 415 V ±10% , AC, 50 HZ ±5% for India ). Surge protection to be provided at every applicable point.\nPLC: The Programmable Logic Controller [PLC] shall consist of a PLC hardware, with 16k (min) program memory shall be protected by a backup battery with further memory protection from an EEPROM.\nHMI: 5.5 Inch Colour Touch screen HMI, will be mounted on A Man-Machine Interface Terminal (MMI) shall be mounted on the front of the main control panel for control of the activated sludge plant. It will provide a display of the process parameters and equipment status. The display will have an associated keypad. The system will allow operator changes to set points and control of equipment. The terminal shall include an alarm annunciation with a dedicated alarm page and allow acknowledgment of alarms.	item530	1	Each
529	529	Motor Control Centre\nDesign, fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre shall be fabricated with reinforcement of suitable size angle iron, channel ‘T’ sections irons and/or flats wherever necessary. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels.\nIncoming\n400 amps TPN MCCB with the following accessories:\na. 0-500 volts 96 x 96 mm square electronic voltmeter with selector switch shall be protected by 2 amps TP MCB. 1 Set\nb. 0-100 amps 96 x 96 mm square electronic ammeter with selector switch and 100./5 amps 10 VA CL:1 CTs. 1 Set.\nc. Phase indicating lamps shall be protected by 2 amp SP MCB 3 Sets.\nBus Bar\n300 amps TPN (15 KA) copper bus bar with heat shrinkable insulation sleeves.\nRequired Nos of required capacity TPN MCB for direct on line starter/star delta starters and out going feeders to all the pumps/blowers etc. (including standbys). Each compartment shall contain auto / manual selector switch and indicating lamp with MCB’s for ‘ON/OFF/TRIP’ status of motor.\nSpare MCB’s of following capacities: 32 amps TPN MCB’s 3 Nos.\nAll MCCBs / MCBs shall be of 15 KA breaking capacity and suitable for motor duty application.\nAll motor starters shall be provided with Automatic level controller.\nDOL starters shall be used for mototrs below 10HP and Star-Delta Starters for other motors .\nProvision shall be made for providing potential free contacts to all pumps starters.	item531	1	Each
530	530	Supplying & Fixing of Cables , Conector, Cable Trays, to make Electrical Installation Complete. Necessary cable alleys, internal / cabling, wiring, cabling from MCC to various pumps / equipment and interlocking, earthing and earthing pits for all equipment	item532	1	Lot
531	531	Ultrafiltration System - 22 KL/Hr - For Generating 220 KL Water for Flushing\nUF Module (Hollow Fibre -outside in type porocity 0.1 to 0.01 micron) including micron cartridge filter in PP housing, Pneumatic Valve, PLC Electrical Panel, flow meter, compressor and all other accessories making the system complete.\nFlow rate : 22 cum/hr Output.\nInlet TSS :- 10-30 mg/lt.\nFiltration Flux :- 90 lt/m2/hr.\nMembrane Area - 128 M2 as per approved makes.\nMembrane MOC - PVDF / PES.\nMembrane Type :- Pressure Feed Mambrane 0.01-0.04 Micron rating type, Out to in process.\nNo. of UF Membrane - As Per Manufacturer.	item533	1	Set
532	532	UF Feed Pump\nCapacity 22 M3/hr each (1 W + 1 SB)\nHead 20-25 Mts\nRPM 2900	item534	1	Set
533	533	Supply, installation, testing & commissioning of UF pre fine filtration. It can be micron filter or Bag filter as per vendor design. The MOC of housing of filter shall be PP	item535	1	Set
534	534	Supplying, installing, testing, commissioning of centrifugal Vertical UF Backwash pumps with Complete SS - 304 with motor, pressure gauge with isolation cock, Isolation valve, NRV on delivery line. Isolation valve, strainer at suction. The pump shall be suitable for 415±10% volts 3 phase AC supply .\nCapacity : - 35 M³/h\nHead : - 18- 20 m\nNo. of Pumps: 1 No\nNote-CIP pumps can be common with item no.c	item536	1	Set
535	535	Effluent Treatment Plant 75 KLD for MMCH Hospital\nDesign, Supplying, installing, testing & commissioning of Effluent Treatment Plant of 75 KLD (excluding excavation, back filling & disposal of surplus earth and Civil construction work) for the following duty:\nEffluent from OT Scrubs, blood bank, labs etc. Some solvent/ chemical waste originating typically from hospital complex shall also be discharged into the ETP. Design to take consideration of same.\nINLET EFFLUENT CHARACTERSTICS (ASSUMED)\nPH : 5.5 - 9.0\nBOD : 250 - 600 mg/l\nS. Solids : 200 - 650 Mg/l\nCOD : 600 - 1200 mg/l\nOil & Grease : 50 - 140 mg/L\nDesired Effluent Quality After Treatment\npH - 6.5 – 8.5\nBOD - Less than 150 Mg/L\nS. Solids - Less than or equal to 100 Mg/L\nCOD - Less than or equal to 300 Mg/L\nOil & Grease - Less than 5 Mg/L\nEffluent treatment plant shall include the following items:\nScreen Chamber\nEqualization tank/sump\nPrimary Tube Settler\nDosing System\nSludge Holding Tank\nUV System\nAir Blowers, Pumps & equipment\nPiping, valves etc\nClarified Water tank\nElectrical Panel & Cabling\nNote:\nContractor shall ensure submission of detailed GA drawings (Plan & Section), P&I diagram, schematic diagram for the above said component and additional component if so required for the complete working of the ETP for the full capacity.	item537	1	Set
536	536	Water Supply, Drainage Pumps & Water Treatment Equipments\nSupply, installation, testing & commissioning of vertical inline multistage pumping set (Imported) with Stainless steel body, impeller, casing, shaft and C.I. base & head with mechanical seal, connected to a TEFC induction motor suitable for 415+/- 10% volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundations, 80x40 mm I section base plate bolted to cement concrete foundations complete.Vendor to submit performance curves and technical catalogue of the proposed model for review and information.\nFilter Feed Pump ( Dom. Water) at Water Supply Pump Room (TB)\nSet of Two Pumps ( 2 Working+ 1 Standby)\nCapacity 300 LPM\nHead 35 M.\nHP 5.0 HP Approxi.	item538	1	Set
537	537	Supply, installation, testing & commissioning of vertical inline multistage pumping set (Imported) with Stainless steel body, impeller, casing, shaft and C.I. base & head with mechanical seal, connected to a TEFC induction motor suitable for 415+/- 10% volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundations, 80x40 mm I section base plate bolted to cement concrete foundations complete.Vendor to submit performance curves and technical catalogue of the proposed model for review and information.\nFilter Feed Pump ( Dom. Water) at Water Supply Pump Room (MMCH)\nSet of Two Pumps ( 2 Working+ 1 Standby)\nCapacity 450 LPM\nHead 35 M.\nHP 5.0 HP Approxi.	item539	1	Set
538	538	Supply, installation, testing & commissioning of vertical inline multistage pumping set (Imported) with Stainless steel body, impeller, casing, shaft and C.I. base & head with mechanical seal, connected to a TEFC induction motor suitable for 415+/- 10% volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundations, 80x40 mm I section base plate bolted to cement concrete foundations complete.Vendor to submit performance curves and technical catalogue of the proposed model for review and information.\nSoftener Feed Pump ( Cooling Tower) at STP Pump Room\nSet of Two Pumps ( 1 Working+ 1 Standby)\nCapacity 250 LPM\nHead 35 M.\nHP 5.0 HP Approxi.	item540	2	Set
539	539	Supply, installation, testing & commissioning of vertical inline multistage pumping set (Imported) with Stainless steel body, impeller, casing, shaft and C.I. base & head with mechanical seal, connected to a TEFC induction motor suitable for 415+/- 10% volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundations, 80x40 mm I section base plate bolted to cement concrete foundations complete.Vendor to submit performance curves and technical catalogue of the proposed model for review and information.\nSoft Water Transfer Pump at STP Pump Room\nSet of Two Pumps ( 1 Working+ 1 Standby)\nCapacity 250 LPM\nHead 65 M.\nHP 6.0 HP Approxi.	item541	2	Set
540	540	Supply, installation, testing & commissioning of vertical inline multistage pumping set (Imported) with Stainless steel body, impeller, casing, shaft and C.I. base & head with mechanical seal, connected to a TEFC induction motor suitable for 415+/- 10% volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundations, 80x40 mm I section base plate bolted to cement concrete foundations complete.Vendor to submit performance curves and technical catalogue of the proposed model for review and information.\nWater makeup pump in UGT Pump room (TB)\nSet of Two Pumps ( 1 Working+ 1 Standby)\nCapacity 350 LPM\nHead 35 M.\nHP 5.0 HP Approxi.	item542	1	Set
541	541	Supply, installation, testing & commissioning of vertical inline multistage pumping set (Imported) with Stainless steel body, impeller, casing, shaft and C.I. base & head with mechanical seal, connected to a TEFC induction motor suitable for 415+/- 10% volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundations, 80x40 mm I section base plate bolted to cement concrete foundations complete.Vendor to submit performance curves and technical catalogue of the proposed model for review and information.\nWater makeup pump in UGT Pump room (MMCH)\nSet of Two Pumps ( 1 Working+ 1 Standby)\nCapacity 450 LPM\nHead 35 M.\nHP 5.0 HP Approxi.	item543	1	Set
542	542	Providing, installing, testing and commissining of variable speed (VSPS) hydropneumatic system mounted on a common base plate comprising of vertical centrifugal pumping set with S.S body, stainless steel impeller and mechanical seal, shaft directly coupled to a TEFC induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, one No. microprocessor based controller, dedicated variable frequency drive for each pump, one No.remote sensors, pressure transducers, sequence running cotroller, dry running Protection,motor control centre, necessary power and control cabling from MCC to pumps including required rating of MCB, one No. 60 litre capacity M.S diaphragam tank with interchangeable butyl rubber membrane,complete in all respects including stainless steel grade 316 pipe suction and delivery headers and isolation/ control valves( ball valves/butterfly valves/ Nan return valves/ vibration eliminators etc as required) , power box, equipped with fuses/ isolators/circuit breakers as required.\nThe entire Hydropneumatic system shall be factory fitted.\nDomestic Water Transfer at Pump Room (TB)\nSet of Two Pumps ( 2 Working+ 1 Standby)\nCapacity 350 LPM\nHead 75 M.\nHP 7.5 HP Approxi.	item544	1	Set
543	543	Providing, installing, testing and commissining of variable speed (VSPS) hydropneumatic system mounted on a common base plate comprising of vertical centrifugal pumping set with S.S body, stainless steel impeller and mechanical seal, shaft directly coupled to a TEFC induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, one No. microprocessor based controller, dedicated variable frequency drive for each pump, one No.remote sensors, pressure transducers, sequence running cotroller, dry running Protection,motor control centre, necessary power and control cabling from MCC to pumps including required rating of MCB, one No. 60 litre capacity M.S diaphragam tank with interchangeable butyl rubber membrane,complete in all respects including stainless steel grade 316 pipe suction and delivery headers and isolation/ control valves( ball valves/butterfly valves/ Nan return valves/ vibration eliminators etc as required) , power box, equipped with fuses/ isolators/circuit breakers as required.\nThe entire Hydropneumatic system shall be factory fitted.\nDomestic Water Transfer at Pump Room (MMCH)\nSet of Two Pumps ( 2 Working+ 1 Standby)\nCapacity 550 LPM\nHead 75 M.\nHP 10 HP Approxi.	item545	1	Set
544	544	Providing, installing, testing and commissining of variable speed (VSPS) hydropneumatic system mounted on a common base plate comprising of vertical centrifugal pumping set with S.S body, stainless steel impeller and mechanical seal, shaft directly coupled to a TEFC induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, one No. microprocessor based controller, dedicated variable frequency drive for each pump, one No.remote sensors, pressure transducers, sequence running cotroller, dry running Protection,motor control centre, necessary power and control cabling from MCC to pumps including required rating of MCB, one No. 60 litre capacity M.S diaphragam tank with interchangeable butyl rubber membrane,complete in all respects including stainless steel grade 316 pipe suction and delivery headers and isolation/ control valves( ball valves/butterfly valves/ Nan return valves/ vibration eliminators etc as required) , power box, equipped with fuses/ isolators/circuit breakers as required.\nThe entire Hydropneumatic system shall be factory fitted.\nFlushing Water Transfer STP Pump Room (TB)\nSet of Two Pumps ( 1 Working+ 1 Standby)\nCapacity 350 LPM\nHead 75 M.\nHP 7.5 HP Approxi.	item546	1	Set
545	545	Providing, installing, testing and commissining of variable speed (VSPS) hydropneumatic system mounted on a common base plate comprising of vertical centrifugal pumping set with S.S body, stainless steel impeller and mechanical seal, shaft directly coupled to a TEFC induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, one No. microprocessor based controller, dedicated variable frequency drive for each pump, one No.remote sensors, pressure transducers, sequence running cotroller, dry running Protection,motor control centre, necessary power and control cabling from MCC to pumps including required rating of MCB, one No. 60 litre capacity M.S diaphragam tank with interchangeable butyl rubber membrane,complete in all respects including stainless steel grade 316 pipe suction and delivery headers and isolation/ control valves( ball valves/butterfly valves/ Nan return valves/ vibration eliminators etc as required) , power box, equipped with fuses/ isolators/circuit breakers as required.\nThe entire Hydropneumatic system shall be factory fitted.\nFlushing Water Transfer STP Pump Room (MMCH)\nSet of Two Pumps ( 1 Working+ 1 Standby)\nCapacity 450 LPM\nHead 75 M.\nHP 7.5 HP Approxi.	item547	1	Set
546	546	Providing, installing, testing and commissining of variable speed (VSPS) hydropneumatic system mounted on a common base plate comprising of vertical centrifugal pumping set with S.S body, stainless steel impeller and mechanical seal, shaft directly coupled to a TEFC induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, one No. microprocessor based controller, dedicated variable frequency drive for each pump, one No.remote sensors, pressure transducers, sequence running cotroller, dry running Protection,motor control centre, necessary power and control cabling from MCC to pumps including required rating of MCB, one No. 60 litre capacity M.S diaphragam tank with interchangeable butyl rubber membrane,complete in all respects including stainless steel grade 316 pipe suction and delivery headers and isolation/ control valves( ball valves/butterfly valves/ Nan return valves/ vibration eliminators etc as required) , power box, equipped with fuses/ isolators/circuit breakers as required.\nThe entire Hydropneumatic system shall be factory fitted.\nIrrigation Pumps at STP Pump Room\nSet of Two Pumps ( 1 Working+ 1 Standby)\nCapacity 200 LPM\nHead 50 M.\nHP 5 HP Approxi.	item548	2	Set
547	547	Providing, installing, testing and commissining of variable speed (VSPS) hydropneumatic system mounted on a common base plate comprising of vertical centrifugal pumping set with S.S body, stainless steel impeller and mechanical seal, shaft directly coupled to a TEFC induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, one No. microprocessor based controller, dedicated variable frequency drive for each pump, one No.remote sensors, pressure transducers, sequence running cotroller, dry running Protection,motor control centre, necessary power and control cabling from MCC to pumps including required rating of MCB, one No. 60 litre capacity M.S diaphragam tank with interchangeable butyl rubber membrane,complete in all respects including stainless steel grade 316 pipe suction and delivery headers and isolation/ control valves( ball valves/butterfly valves/ Nan return valves/ vibration eliminators etc as required) , power box, equipped with fuses/ isolators/circuit breakers as required.\nThe entire Hydropneumatic system shall be factory fitted.\nHyd. System for Domestic Water Supply at Hospital Terrace\nSet of Two Pumps ( 1 Working+ 1 Standby)\nCapacity 300 LPM\nHead 20 M.\nHP 3 HP Approxi.	item549	4	Set
548	548	Providing, installing, testing and commissining of variable speed (VSPS) hydropneumatic system mounted on a common base plate comprising of vertical centrifugal pumping set with S.S body, stainless steel impeller and mechanical seal, shaft directly coupled to a TEFC induction motor suitable for 400/440 volts, 3 phase, 50 cycles AC supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundation, one No. microprocessor based controller, dedicated variable frequency drive for each pump, one No.remote sensors, pressure transducers, sequence running cotroller, dry running Protection,motor control centre, necessary power and control cabling from MCC to pumps including required rating of MCB, one No. 60 litre capacity M.S diaphragam tank with interchangeable butyl rubber membrane,complete in all respects including stainless steel grade 316 pipe suction and delivery headers and isolation/ control valves( ball valves/butterfly valves/ Nan return valves/ vibration eliminators etc as required) , power box, equipped with fuses/ isolators/circuit breakers as required.\nThe entire Hydropneumatic system shall be factory fitted.\nHyd. System for Domestic Water Supply at housing Terrace\nSet of Two Pumps ( 1 Working+ 1 Standby)\nCapacity 200 LPM\nHead 20 M.\nHP 2.5 HP Approxi.	item550	2	Set
549	549	Supply, installing, testing and commissioning of submersible open impeller non-clog pumps with C.I.body and to TEFC submersible motor for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphragm and bend, vertical discharge pipe, guide pipe and chain in built level controller, sequence running controller, arrangement for both pumps together inacase of emenegency, audible hooter for failure or flooding, dry running Protection complete in all respects., painting, testing and commissioning complete with approved quality and make as required as per instruction of site incharge.\n(Pumps shall be installed in a set of two pumps One working and One standby)\nBasement & Pump Room Drainage Pumps\n(Pumps to be suitable to handle solids upto 12 mm size)\nCapacity - 4.0 LPS (Each)\nHead - 20 M\nH.P. - 2.0 HP Approx.	item551	11	Set
550	550	Supply, installing, testing and commissioning of submersible open impeller non-clog pumps with C.I.body and to TEFC submersible motor for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphragm and bend, vertical discharge pipe, guide pipe and chain in built level controller, sequence running controller, arrangement for both pumps together inacase of emenegency, audible hooter for failure or flooding, dry running Protection complete in all respects., painting, testing and commissioning complete with approved quality and make as required as per instruction of site incharge.\n(Pumps shall be installed in a set of two pumps One working and One standby)\nSewage Sump Pumps\n(Pumps to be suitable to handle solids upto 40 mm size)\nCapacity - 4.0 LPS (Each)\nHead - 20 M\nH.P. - 3.0 HP Approx.	item552	4	Set
551	551	Supply Installation,Testing & Commissioning of vertical self supporting Filter fabricated from MS sheet as per IS: 2825, ((minimum thickness of shall 6 mm and dished end 8 mm)) pressure gauges, sample cock, GI class 'C' face piping, CI butterfly valves and all accessories , with initial charge of filter media including anthracite, painting inside with epoxy paint and outside with two coat of red oxide primer and two or more coat of synthetic enamel paint, testing and commissioning complete.\nDual Media Filter For Domestic Water Supply (TB)\nCapacity- 35000 LPH\nFiltration rate- 16000 LPH/Sqm.\nFilter dia approx. - 1700 MM\nWorking pressure: 3.0 Kg/sq cm.\nTest pressure : 4. 5 Kg/sq cm	item553	1	Each
552	552	Supply Installation,Testing & Commissioning of vertical self supporting Filter fabricated from MS sheet as per IS: 2825, ((minimum thickness of shall 6 mm and dished end 8 mm)) pressure gauges, sample cock, GI class 'C' face piping, CI butterfly valves and all accessories , with initial charge of filter media including anthracite, painting inside with epoxy paint and outside with two coat of red oxide primer and two or more coat of synthetic enamel paint, testing and commissioning complete.\nDual Media Filter For Domestic Water Supply (MMCH)\nCapacity- 52500 LPH\nFiltration rate- 16000 LPH/Sqm.\nFilter dia approx. - 2100 MM\nWorking pressure: 3.0 Kg/sq cm.\nTest pressure : 4. 5 Kg/sq cm	item554	1	Each
553	553	Supply Installation,Testing & Commissioning of vertical self supporting Filter fabricated from MS sheet as per IS: 2825, ((minimum thickness of shall 6 mm and dished end 8 mm)) pressure gauges, sample cock, GI class 'C' face piping, CI butterfly valves and all accessories , with initial charge of filter media including anthracite, painting inside with epoxy paint and outside with two coat of red oxide primer and two or more coat of synthetic enamel paint, testing and commissioning complete.\nActivated Carbon Filter For Domestic Water Supply (TB)\nCapacity- 35000 LPH\nFiltration rate- 16000 LPH/Sqm.\nFilter dia approx. - 1700 MM\nWorking pressure: 3.0 Kg/sq cm.\nTest pressure : 4. 5 Kg/sq cm	item555	1	Each
554	554	Supply Installation,Testing & Commissioning of vertical self supporting Filter fabricated from MS sheet as per IS: 2825, ((minimum thickness of shall 6 mm and dished end 8 mm)) pressure gauges, sample cock, GI class 'C' face piping, CI butterfly valves and all accessories , with initial charge of filter media including anthracite, painting inside with epoxy paint and outside with two coat of red oxide primer and two or more coat of synthetic enamel paint, testing and commissioning complete.\nActivated Carbon Filter For Domestic Water Supply (MMCH)\nCapacity- 52000 LPH\nFiltration rate- 16000 LPH/Sqm.\nFilter dia approx. - 2100 MM\nWorking pressure: 3.0 Kg/sq cm.\nTest pressure : 4. 5 Kg/sq cm	item556	1	Each
555	555	Supply Installation,Testing & Commissioning of \"Cation\" ion exchange Water Softener fabricated from MS plate as per IS: 2825 (minimum thickness of shall 6 mm and dished end 8 mm) complete with initial charge of resins , GI class 'C' face piping, CI butterfly valves, pressure gauge, hydraulic brine injector, accessories, painting inside with epoxy paint, including 500 liters capacity PVC / HDPE brine tank suitable for 2 regeneration capacity, testing and commissioning complete with resins of approved quality and make.\nSoftener For Cooling Tower Water Supply\nHardness-\nInlet- 500-600 PPM\nOutlet- Less than 5 PPM\nCapacity- 8000 LPH\nRegeneration period 12 hrs.\nQuantity of soft water\nbetween two regenerations = 180000 lit\nWorking pressure: 3.0 Kg/sq cm.\nTest pressure : 4. 5 Kg/sq cm	item557	2	Each
556	556	Supply Installation,Testing & Commissioning of metering pump type chemical doser with 100 lits. HDPE chemical grade solution tank,injection fitting assembly,suction and delivery hose upto the point of injection, capacity 0-6 lph, complete in all respects.\nChlorination of Domestic Water	item558	2	Each
557	557	Design, manufacture, supplying, fixing in position, testing and commissioning of the following front operated cubicle type, front access 2mm thick mild steel sheet, free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hz system and suitable for a fault level of 25 MVA symmetrical at 415 volts.\nAll switchboards shall have provision for entry of cables from the top or bottom as required.\nAll live accessible parts shall be shrouded and all equipment shall be finger touch proof. The busbars insulation shall be with heat shrinkable sleeves. SMC/DMC shrouds and busbar supports shall be used. Padlocking facility shall be provided on all outgoing feeders doors and switch handles shall be lockable in OFF position.\nElectric Panel For Water Supply Pumps at Water Supply Pump Room\nINCOMING\n1 No. 200 amps TPN MCCB with the following accessories:\n1 No. square flush mounting 0-500 volts scaled voltmeter with three way and OFF switch.\nThree phase indicating lights.\nElectrolytic high conductivity three phase and neutral tinned copper bus bar rated at 300 amps having a current density of 1 amp per Sqmm suitable to with stand symmetrical fault level of 25 MVA at 415 volts. The neutral bus bar is to be of 100% capacity.\nOUTGOING UNITS\nTwo 25 Amp. TP + NL M.C.C.B. with rotary handle of breaking capacity 25KA\nSix 63 Amp. TP + NL M.C.C.B. with rotary handle of breaking capacity 25KA\n8 Nos. fully automatic DOL starters with push buttons and ON/OFF indicating lights and overload relays for 1.5 to 7.5 HP pump .\n8 Nos. rotary selector switch for selecting mode of operation i.e. auto/manual/off.\n8 Nos.cyclic relay for automatic duty changeover of pumps.\n8 No. single phase preventors.\n8 Nos. square flush mounting 0-30 amps scaled ammeters with three way and OFF selector switch.\nSpace for 3 Nos. Level Controllers.\nSwitchgear shall be suitable for the HPS of various motors.\n4 Nos. 32 Amp. TPN MCB Spare.\nThe motor control panel shall be prewired with colour coded wires with identification labels complete in all respects as required.	item559	2	Set
558	558	Electric Panel For Water Supply Pumps at STP Pump Room\nINCOMING\n1 No. 200 amps TPN MCCB with the following accessories:\n1 No. square flush mounting 0-500 volts scaled voltmeter with three way and OFF switch.\nThree phase indicating lights.\nElectrolytic high conductivity three phase and neutral tinned copper bus bar rated at 200 amps having a current density of 1 amp per Sqmm suitable to with stand symmetrical fault level of 25 MVA at 415 volts. The neutral bus bar is to be of 100% capacity.\nOUTGOING UNITS\nTwo 25 Amp. TP + NL M.C.C.B. with rotary handle of breaking capacity 25KA\nTen 63 Amp. TP + NL M.C.C.B. with rotary handle of breaking capacity 25KA\n12 Nos. fully automatic DOL starters with push buttons and ON/OFF indicating lights and overload relays for 1.5 to 7.5 HP pump .\n12 Nos. rotary selector switch for selecting mode of operation i.e. auto/manual/off.\n12 Nos.cyclic relay for automatic duty changeover of pumps.\n12 No. single phase preventors.\n12 Nos. square flush mounting 0-30 amps scaled ammeters with three way and OFF selector switch.\nSpace for 5 Nos. Level Controllers.\nSwitchgear shall be suitable for the HPS of various motors.\n4 Nos. 32 Amp. TPN MCB Spare.\nThe motor control panel shall be prewired with colour coded wires with identification labels complete in all respects as required.	item560	2	Set
559	559	Electric Panel For Drainage Sump Pump\nOne incoming main MCCB unit of 63 amps rating.\nCopper bus bar is separate chamber fully taped of 100 amps capacity.\nTwo MCB units of 25 amps\nTwo fully automatic DOL starters with push buttons and on/off indicating lights.\nOne rotary duty selector switch\nTwo manual/auto/off switches.\nTwo single phasing presenters.\nOne panel type voltmeter with rotary selector switch for reading voltage between phases.\nTwo ampere meters one for each motor.\nThree neon phase indicating lights on the incoming mains.\nSpace for one liquid level controllers.\nAll internal wiring colour coded from incoming mains to various switchgear, starters, meters, indicating lamps and bus bar with a changeover facility to run each pump alternatively with an alarm bell in case of both pump’s running at one time. Switchegear offered must be compatible with the HP of the motors offered.\nMotor control centre as described above.	item561	15	Set
560	560	Supplying, installing, testing and commissioning controllers with low voltage relays, stainless steel probes and PVC shroud wiring from tank top to probes of required.\nLevel Controller For Water Supply Pump:\nTo start pump when water level is low in Domestic Water U.G. tank and shut off pump when Domestic Water U.G. tank is full. Also to stop when water level is low in raw water underground tank.	item562	4	Each
561	561	Supplying, installing, testing and commissioning controllers with low voltage relays, stainless steel probes and PVC shroud wiring from tank top to probes of required.\nLevel Controller For Sump Pumps:\nTo start pump when water level is high in sump and shut off pump when sump is empty. Both pumps are start when sump is over flowing.	item563	15	Each
562	562	Providing and fixing GI pipes complete (IS:1239 Heavy Class) with GI fittings and clamps including MS pipe supports, enamel paint as per specifications cutting and making good the walls etc. complete.\n50 mm dia	item564	40	Metre
563	563	Providing and fixing GI pipes complete (IS:1239 Heavy Class) with GI fittings and clamps including MS pipe supports, enamel paint as per specifications cutting and making good the walls etc. complete.\n65 mm dia	item565	40	Metre
564	564	Providing and fixing GI pipes complete (IS:1239 Heavy Class) with GI fittings and clamps including MS pipe supports, enamel paint as per specifications cutting and making good the walls etc. complete.\n100 mm dia	item566	50	Metre
565	565	Providing and fixing GI pipes complete (IS:1239 Heavy Class) with GI fittings and clamps including MS pipe supports, enamel paint as per specifications cutting and making good the walls etc. complete.\n150 mm dia	item567	20	Metre
566	566	Butterfly valve (manual) with C.I body SS disc nitrile sheet & O ring & PN 16 Pressure rating as specified .\n50 mm dia	item568	42	Each
567	567	Butterfly valve (manual) with C.I body SS disc nitrile sheet & O ring & PN 16 Pressure rating as specified .\n150 mm dia	item569	2	Each
568	568	Non - return valve with dual plate of CI Body SS plates vulcanized NBR seal flanged end & PN 16 rating as specified.\n50 mm dia	item570	24	Each
569	569	Non - return valve with dual plate of CI Body SS plates vulcanized NBR seal flanged end & PN 16 rating as specified.\n65mm dia.	item571	24	Each
570	570	Providing and fixing resilient rubber neoprene lined style arch vibration eliminators suitable for raw water upto 45 deg.C. Temperature working pressure upto 16 Kg/Sqcm.\n50 mm dia	item572	24	Each
571	571	Providing and fixing resilient rubber neoprene lined style arch vibration eliminators suitable for raw water upto 45 deg.C. Temperature working pressure upto 16 Kg/Sqcm.\n65 mm dia	item573	24	Each
572	572	Providing and fixing resilient rubber neoprene lined style arch vibration eliminators suitable for raw water upto 45 deg.C. Temperature working pressure upto 16 Kg/Sqcm.\n80 mm dia	item574	4	Each
573	573	Providing and fixing heavy duty armoured cables 1.1 KVA grade including necessary support clamps at ceiling level and connection lugs complete in all respects.\nPower cable Copper 3 core 10 sq.mm	item575	100	Metre
574	574	Providing and fixing heavy duty armoured cables 1.1 KVA grade including necessary support clamps at ceiling level and connection lugs complete in all respects.\nPower cable Copper 3 core 6 sq.mm	item576	150	Metre
575	575	Providing and fixing heavy duty armoured cables 1.1 KVA grade including necessary support clamps at ceiling level and connection lugs complete in all respects.\nPower cable Copper 3 core 4 sq.mm	item577	100	Metre
576	576	Providing and fixing heavy duty armoured cables 1.1 KVA grade including necessary support clamps at ceiling level and connection lugs complete in all respects.\nControl cable copper 2 core 1.5 sq.mm	item578	300	Metre
577	577	Reverse Osmosis (RO) for best Quality Drinking Water.\nvi. Taurus-250 LPH do 100 Litres Storage	item579	10	Each
578	578	Supply, installation, testing and commissioning of double wall insulated stainless steel water storage tank (inner sheet is SS 316 & outer sheet of SS-304), thickness of sheet as per manufacturer specification, placed at terrace level with inlet, outlet, overflow connection complete with 25 mm dia bend for vent, ball valve for scour, mosquito proof brass overflow grating and 600 mm dia manhole cover with locable arrangment completeas per direction of Engineer-in-charge.\n1500 Litres Capacity for RO Water	item580	4	Each
579	579	Providing and fixing F.R.P. Grating drain cover M.S. Angle ( 35 x35 x 5 mm). ( Load Bearing cap. 2.5 T, suitable for car parking, basement, Pump room, Parking Area ).\n377mm wide and 30mm thick	item581	910	Metre
580	580	FIRE FIGHTING WORKS\nFIRE PUMPS\nSupplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :\n(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.\n(b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.\n(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.\n(d)Suitable cement concrete foundation duly plastered with anti vibration pads.\n2280 lpm at 88 m Head (For Hydrant & Sprinkler System).\nNote: *The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm2 pressure at the highest/farthest point.	item582	4	Set
581	581	Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :\n(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.\n(b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.\n(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.\n(d)Suitable cement concrete foundation duly plastered with anti vibration pads.\n1620 lpm at 56 m Head (For Water Curtain System).\nNote: *The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm2 pressure at the highest/farthest point.	item583	2	Set
582	582	Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)\n(a) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.\n(b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.\n(c) M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.\n(d) Suitable cement concrete foundation duly plastered with anti vibration pads.\n2280 lpm at 88 m Head (For Hydrant & Sprinkler System).\nNote: *The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm2 pressure at the highest/farthest point.	item584	4	Set
583	583	Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump).\n(a) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.\n(b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325.\n(c) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.\n(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.\n180 lpm at 88 m Head (For Hydrant & Sprinkler System).	item585	4	Set
584	584	Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump).\n(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520.\n(b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.\n(c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.\n(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.\n900 lpm at 35 m Head	item586	4	Set
585	585	Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump).\n(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520.\n(b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.\n(c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.\n(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.\n450 lpm at 35 m Head	item587	5	Set
586	586	CONTROL PANELS\nFabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :\nIncomings\n400A, 50kA 4 Pole MCCB, Ics=100% Icu rating\nDigital Voltmeter 0-500V with selector switch\nAmmeter (0-400 A) with selector swtich & CTs etc.\nLED type RYB phase indicating lamps, ON, OFF, trip indicating lamps\nSet of Copper Bus Bar 500A\nOutgoings\n( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)\nMain Fire Pump\n200 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 75 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. 2 Set\nJockey Pump\n100 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. 2 Set\nDiesel Engine Control\nControl for diesel engine comprising -\nAutomatic/Manual selctor switch & 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode\nIndicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication\nBattery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter\nAll standard relays and accessories for automatic operation of diesel engine\nSystem Controller\nDesigning, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specifications.	item588	2	Set
587	587	Pressurisation Pump and Terrace Pump Control\n(a) 63 Amps. TP & N SFC with HRC fuses\n(b) Voltmeter (0-500 Volt) with selector switch.\n© Ammeter (0-60 Amps.) with selector switch & CTs.\n(d) Set of 3 phase indication lamp\n(e) Suitable HP fully automatic Star/Delta Starter with over load protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation.\n(f) Selector switch for local/remote, auto/manual/off operation ON/OFF indication etc.	item589	9	Set
588	588	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. It should be complete as per specifications & directions of Engineer-in-charge.\n4 x 25 sqmm ( 28 mm )	item590	8	Each
589	589	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. It should be complete as per specifications & directions of Engineer-in-charge.\n3.5 x 50 sqmm ( 35 mm )	item591	12	Each
590	590	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. It should be complete as per specifications & directions of Engineer-in-charge.\n3 X 10 sq. mm (22mm)	item592	18	Each
591	591	Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.\n150 mm width x 50mm depth x 1.6 mm thickness.	item593	125	Meter
592	592	Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.	item594	8	Set
593	593	Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.	item595	60	Meter
594	594	Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.	item596	120	Meter
595	595	Supplying & laying one number XLPE insulated PVC sheathed Aluminium Conductor armoured UG cable of 1.1 KV grade Conforming to IS 7098/1988 with upto date ammendment of following size in the existing RCC/HUME/ METAL /GI /CI /Stoneware/DWC pipe/ masonary Open Duct/ cable tray/ open in air etc. as requred.\n4 core, 25 sq.mm. Aluminium Armoured	item597	400	Meter
596	596	Supplying & laying one number XLPE insulated PVC sheathed Aluminium Conductor armoured UG cable of 1.1 KV grade Conforming to IS 7098/1988 with upto date ammendment of following size in the existing RCC/HUME/ METAL /GI /CI /Stoneware/DWC pipe/ masonary Open Duct/ cable tray/ open in air etc. as requred.\n3.5 core, 50 sq.mm. Aluminium Armoured	item598	400	Meter
597	597	Supplying & laying one number XLPE insulated PVC sheathed Aluminium Conductor armoured UG cable of 1.1 KV grade Conforming to IS 7098/1988 with upto date ammendment of following size in the existing RCC/HUME/ METAL /GI /CI /Stoneware/DWC pipe/ masonary Open Duct/ cable tray/ open in air etc. as requred.\n3 core, 10 sq.mm. Aluminium Armoured	item599	180	Meter
598	598	Supply and fixing in position 1 m wide Insulation mat made of elastomeric polymers Material (Class -A) of 415V grade as per IS 15642-2006 . Thickness of insulation mat shall be not less than 2 mm to withstand 1.1 KV dielectric strength AS PER IS 15652 : 2006. It should be complete as per specifications & directions of Engineer-in-charge.	item600	20	Meter
599	599	PIPES & ACCESSORIES\nProviding laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. ( For Underground )\n200 mm. dia (wall thickness = 6.3 mm)	item601	850	Meter
600	600	Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. ( For Underground )\n150 mm. Dia	item602	2105	Meter
601	601	Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. ( For Underground )\n100 mm. Dia	item603	220	Meter
602	602	Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. ( For Underground )\n80 mm. Dia	item604	510	Meter
603	603	Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Plant Room piping/Vertical Riser/Downcomer/Floor).\n25 mm dia	item605	21664	Meter
604	604	Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Plant Room piping/Vertical Riser/Downcomer/Floor).\n32 mm dia	item606	3966	Meter
605	605	Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Plant Room piping/Vertical Riser/Downcomer/Floor).\n40 mm dia	item607	6461	Meter
606	606	Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Plant Room piping/Vertical Riser/Downcomer/Floor).\n50 mm dia	item608	6167	Meter
607	607	Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Plant Room piping/Vertical Riser/Downcomer/Floor).\n65 mm dia	item609	4382	Meter
608	608	Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Plant Room piping/Vertical Riser/Downcomer/Floor).\n80 mm dia	item610	4309	Meter
609	609	Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Plant Room piping/Vertical Riser/Downcomer/Floor).\n100 mm dia	item611	3786	Meter
610	610	Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Plant Room piping/Vertical Riser/Downcomer/Floor).\n150 mm dia	item612	6066	Meter
611	611	Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Plant Room piping/Vertical Riser/Downcomer/Floor).\n200 mm dia (wall thickness 6.3 mm)	item613	34	Meter
612	612	Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Plant Room piping/Vertical Riser/Downcomer/Floor).\n250 mm dia (wall thickness 6.3 mm)	item614	32	Meter
613	613	Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Plant Room piping/Vertical Riser/Downcomer/Floor).\n300 mm dia (wall thickness 7.1 mm)	item615	12	Meter
614	614	Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :\nSingle headed Stainless steel	item616	249	Set
615	615	Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :\nSingle headed Stainless steel	item617	65	Set
616	616	Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :\n50mm dia	item618	50	Set
617	617	Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :\n80 mm dia	item619	54	Set
618	618	Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :\n100 mm dia	item620	10	Set
619	619	Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :\n150 mm dia	item621	194	Set
620	620	Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :\n200 mm dia	item622	4	Set
621	621	Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :\n250 mm dia	item623	2	Set
622	622	Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.	item624	384	Each
623	623	Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :\n80 mm dia	item625	18	Set
624	624	Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :\n100 mm dia	item626	10	Set
625	625	Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :\n150 mm dia	item627	27	Set
626	626	Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :\n200 mm dia	item628	2	Set
627	627	Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :\n250 mm dia	item629	2	Set
628	628	Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.\n80 mm dia	item630	5	Each
629	629	Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.\n100 mm dia	item631	5	Each
630	630	Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.\n150 mm dia	item632	4	Each
631	631	Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.\n200 mm dia	item633	4	Each
632	632	Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :\nStainless Steel (Grade 304)	item634	628	Set
633	633	Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.\n20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585\n20 mm nominal internal dia gun metal globe valve & nozzle.\nDrum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.\n40 m	item635	266	Set
634	634	Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :\nStainless Steel (Grade 304)	item636	314	Set
635	635	Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :\n2 way-100 mm dia M.S. Pipe. (FOR UG TANK )	item637	23	Set
636	636	Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :\n4 way - 150 mm dia M.S. Pipe. (FOR UG TANK & RISER)	item638	9	Set
637	637	Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.	item639	49	Set
638	638	Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :\nPendent Sprinkler	item640	10667	Each
639	639	Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :\nUpright Sprinkler	item641	12909	Each
640	640	Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :\nHorizontal side wall sprinkler	item642	506	Each
641	641	Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.	item643	159	Each
642	642	Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.\n100mm dia	item644	18	Each
643	643	Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.\n150mm dia	item645	116	Each
644	644	Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required :\n150mm dia	item646	16	Set
645	645	Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.\n700 mm	item647	4267	Each
646	646	Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.\n1000 mm	item648	4267	Each
647	647	Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.\n1200 mm	item649	1067	Each
648	648	Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.\n1500 mm	item650	1067	Each
649	649	Supplying, installation, testing & commissioning of deluge valve (to be used for water curtains) UL listed with wet pilot basic trim assembly for DVA with test and alarm, drip and drain valve with water motor gong complete as required.\n100 mm dia	item651	2	Set
650	650	Supplying, installation, testing & commissioning of deluge valve (to be used for water curtains) UL listed with wet pilot basic trim assembly for DVA with test and alarm, drip and drain valve with water motor gong complete as required.\n150 mm dia	item652	5	Set
651	651	Providing, installation, testing & commissioning of water curtain nozzle 15mm dia nickel chrome plated brass, BSPT, K-factor as per design consideration complete as required.	item653	240	Each
652	652	Providing, installation, testing & commissioning of electric release trim assembly for deluge wall with two way solelnoid valve, weather proof operation on 24 volts DC supply complete as required.	item654	7	Set
653	653	Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required.	item655	10667	Each
654	654	Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required	item656	761	Each
655	655	Providing and fixing standard fireman's axe with heavy insulated rubber handle conforming to IS: 926 complete.	item657	249	Each
656	656	Providing & Fixing of MS door made up of 16 gauge MS Sheet capable of accommodating fire hose reel, landing valve, hose pipes, fittings, 1 No. CO2 & 1 No. Dry podwer type portable fire extinguishers & accessories. The door shall have a front glass with lock and key arrangement & shall be painted with one coat of primer & two coat of finished stove enamelled post office red colour paint & \"FIRE HOSE\" written on front.\n(Approx. size of door: 2100 mm HEIGHT, WIDTH OF DOOR AS PER SHAFT SIZE )	item658	266	Each
657	657	Providing and fixing hose cabinet of size 700mmX600mm made of 16 gause thick MS sheet with 4 mm thick float glass doors in front painted \"FIRE\" in red paint i/c recessary locking arrangement suitable to accommodate external hydrant with butterfly valve 2 nos. 15 mtr. long hose pipe. 1 no. brach pipe mounted on wall or raised brick platform & duly painted with post office red externally and white internally with synthetic enamel paint complete in all respects for external hydrant. as directed by Engineer-in-Charge.	item659	65	Each
658	658	Pressure Vessel\nSupplying, installing, testing and commissioning of pressure vessel for pressurization of fire system complete with valves at outlet / drain to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top, outside with one coat of primer & two coats of synthetic enamel paint of approved shade complete as required to operate commonly main fire pump, sprinkler pump & jockey pump at drop of pressure, automatically at required pressure setting. Complete as per manufacturer's specifications & as directed by Engineer- in-charge.\nworking pressure:- 11 kg/sqcm\ntest pressure: 20 kg/sqcm\n(450 mm dia & 2000 mm height)	item660	6	Nos.
659	659	Providing, Fixing, testing and commissioning of resilient rubber lined single arch vibration eliminators suitable for raw water up to 45 deg. C temperature, working pressure 11 Kg/cm2 and test pressure 16 Kg/cm2 to provide relief from stresses at pipe flanges.\n150 mm dia	item661	20	Nos.
660	660	Providing, Fixing, testing and commissioning of resilient rubber lined single arch vibration eliminators suitable for raw water up to 45 deg. C temperature, working pressure 11 Kg/cm2 and test pressure 16 Kg/cm2 to provide relief from stresses at pipe flanges.\n80 mm dia	item662	26	Nos.
661	661	Supply, fixing, testing and commissioning of screwed type brass/bronze lever operated ball valve of full flow with stainless steel ball (AISI 304 & spindle AISI 410) with setting & gland of superior quality having minimum working pressure of 16 kg/sqcm.\n25 mm Dia	item663	28	Nos.
662	662	Providing and fixing 25 mm dia inspection & testing assembly with gun metal ball valve, gun metal sight glass connection to drain pipe/riser.	item664	134	Set
663	663	Providing & fixing cast iron 100 mm dia. Foot valve with nuts, bolts, 1.5 mm thick CAF gasket complete with all accessories (To be provided into UG Fire Water Tanks).	item665	3	Each
664	664	Providing, fixing water flow meter on test line complete with all accessories for flow indication , monitoring & testing of fire pumps with bypass arrangment including piping & bypass valves.\n150 mm dia	item666	2	Each
665	665	FIRE EXTINGUISHERS\nProviding, storing, handling, shifting, installation, testing and commissioning of halon free portable fire Extinguishers as described below:\nProviding and fixing of 4.5 Kg. carbon-di-oxide type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guase ingernal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming ro IS:15683 finished externally with re enamel paint and fixed to wall with brackets complete with internal charge.	item667	258	Nos.
666	666	Providing, storing, handling, shifting, installation, testing and commissioning of halon free portable fire Extinguishers as described below:\nProviding and fixing 6.0 Kg. ABC Powder type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guase internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to IS:15683 finished externally with re enamel paint and fixed to wall with brackets complete with inernal charge.	item668	258	Nos.
667	667	Providing, storing, handling, shifting, installation, testing and commissioning of halon free portable fire Extinguishers as described below:\nProviding and fixing mechanical foam type fire extingushers consisting of welded M.S. trolley mounted cylindrical body, squeeze lever discharge valve fitted with pressure discharge hose, discharge nozzle, trolley etc., ISI marked as per IS:IS:13386 finished externally with red enamel paint.\nCapacity 50 lit (D.G.Room)	item669	2	Nos.
668	668	Providing, storing, handling, shifting, installation, testing and commissioning of halon free portable fire Extinguishers as described below:\nProviding and fixing carbon-di-oxide fire extingushers trolley mounted with all accessories internal discharge tube,high pressure discharge hose,discharge nozzle, ISI marked as per IS:2878 finished externally with red enamel paint.\nCapacity 22.5 kg	item670	4	Nos.
669	669	LT & HT PANEL, ELECTRICAL ROOM & SERVER ROOM GAS FLOODING SYSTEM:-\n5 LB capacity Novec 1230 , DLP Assembly with automatic valve, push in connector for tube, 5 LB Novec 1230 gas , mounting bracket, End of Line adopter and low pressure switch for monitoring system activation.	item671	4	No.
670	670	10 LB capacity Novec 1230 , DLP Assembly with automatic valve, push in connector for tube, 10 LB Novec 1230 gas , mounting bracket, End of Line adopter and low pressure switch for monitoring system activation.	item672	10	No.
671	671	Linear Pneumatic Heat detection tube with all necessary & supperts	item673	625	Meter
672	672	Master Control Unit with Audio Visual Alarm with wiring to make complete system operational . The control Panel should have provision for integration with fire Alarm /SCAD/BMS System.	item674	14	No.
673	673	Supply, fixing, testing and commissioning of 1x40 Itr completele system with CCOE approved high pressure, seamless Cylinders having sutable 40 ltr water capacity & suitable to store Novec 1230 (FK5-1-12) gas at 34.5 bar pressure with valve assembly, low pressure supervisory switch for monitoring cylinder pressure gauge with safety burst disc safety cap, elbow and other accessories, mounting bracket, container straps, NRV. Electrically operated control head capable of being electrically operated from the fire detection & control, Pressure operated control head which shall allow for pressure actuation of gas mounted directly on top of cylinder valve, manually operated actuator to actuate the gas flooding process with the help of a lever, flexible rubber hose with wire bralded enforcment to route the gas from the storage cyinder to the discharge piping, to be connected to the discharge outlet of gas cylinder valve & to be terminated at the system piping or discharge manifold, Flexible actuation hose complete as required. Discharge nozzle, 180/360 degree. Designated to provide proper flow rate & distrbution Novec 1230 (FK5-1-12) gas to flood the hazard area as per requrement. Electrical non conductive,Novec 1230 (FK5-1-12) required as per NFPA 2001 latest eddition 4.5% Design Concentration. Piping ASTM grade A 106 schedule 40 with fittings & supports and Gas Release Panel compatible to Fire Alarm System.	item675	5	Set
674	674	Supply, fixing, testing and commissioning of 1x150 Itr completele system with CCOE approved high pressure, seamless Cylinders having sutable 150 ltr water capacity & suitable to store Novec 1230 (FK5-1-12) gas at 34.5 bar pressure with valve assembly, low pressure supervisory switch for monitoring cylinder pressure gauge with safety burst disc safety cap, elbow and other accessories, mounting bracket, container straps, NRV. Electrically operated control head capable of being electrically operated from the fire detection & control, Pressure operated control head which shall allow for pressure actuation of gas mounted directly on top of cylinder valve, manually operated actuator to actuate the gas flooding process with the help of a lever, flexible rubber hose with wire bralded enforcment to route the gas from the storage cyinder to the discharge piping, to be connected to the discharge outlet of gas cylinder valve & to be terminated at the system piping or discharge manifold, Flexible actuation hose complete as required. Discharge nozzle, 180/360 degree. Designated to provide proper flow rate & distrbution Novec 1230 (FK5-1-12) gas to flood the hazard area as per requrement. Electrical non conductive,Novec 1230 (FK5-1-12) required as per NFPA 2001 latest addition 4.7% Design Concentration. Piping ASTM grade A 106 schedule 40 with fittings & supports and Gas Release Panel compatible to Fire Alarm System.	item676	3	Set
675	675	Internal Electrical\nWiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose etc. complete. Short point upto 3.00 metre length.	item677	5478	Each
676	676	Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose etc. complete. Medium point upto 6.00 metre length.	item678	11671	Each
677	677	Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose etc. complete. Long point upto 10.00 metre length.	item679	10889	Each
678	678	Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 3 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.	item680	81985	Metre
679	679	Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.	item681	106314	Metre
680	680	Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.	item682	122052	Metre
681	681	Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.	item683	19148	Metre
682	682	Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 10 sq. mm. + earth continuity with 1x 6 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.	item684	2613	Metre
683	683	Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 4 x 4 sq. mm. + earth continuity with 2x2.5 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.	item685	31648	Metre
684	684	Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 4x 6 sq. mm. + earth continuity with 2x4 sq. mm. cable in 32 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.	item686	10059	Metre
685	685	Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.	item687	1115	Metre
686	686	Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 4 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.	item688	13137	Metre
687	687	Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. Short point upto 3.00 metre length.	item689	1381	Each
688	688	Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. Medium point upto 6.00 metre length.	item690	7071	Each
689	689	Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. Long point upto 10.00 metre length.	item691	5642	Each
690	690	Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) Short point upto 3.00 metre length.	item692	375	Each
691	691	Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) Medium point upto 6.00 metre length.	item693	6160	Each
692	692	Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) Long point upto 10.00 metre length.	item694	5471	Each
693	693	Wiring for twin control light point with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 amp flush type 2 way switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete. Medium point upto 6.00 metre length.	item695	381	Each
694	694	Wiring for twin control light point with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 amp flush type 2 way switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete. Long point upto 10.00 metre length.	item696	389	Each
695	695	Supplying and fixing 19 mm dia ISI marked steel conduit pipe (AKG or equivalent as approved by the Dept.) in surface/recessed including cutting the wall and making good the same ti its original architectural finish.	item697	11775	Metre
696	696	Supplying and fixing 25 mm dia ISI marked steel conduit pipe (AKG or equivalent as approved by the Dept.) in recessed including cutting the wall and making good the same ti its original architectural finish.	item698	9303	Metre
697	697	Supplying and fixing 32 mm dia ISI marked steel conduit pipe (AKG or equivalent as approved by the Dept.) in recessed including cutting the wall and making good the same ti its original architectural finish.	item699	145	Metre
698	698	Supplying and fixing 38 mm dia ISI marked steel conduit pipe (AKG or equivalent as approved by the Dept.) in recessed including cutting the wall and making good the same ti its original architectural finish.	item702	145	Metre
699	699	Supplying and fixing 50 mm dia ISI marked steel conduit pipe (AKG or equivalent as approved by the Dept.) in recessed including cutting the wall and making good the same ti its original architectural finish.	item703	145	Metre
700	700	Supply and fixing 19 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:	item704	44290	Metre
701	701	Supply and fixing 25 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:	item705	119135	Metre
702	702	Supply and fixing 32 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:	item706	28465	Metre
703	703	Supply and fixing 38 mmdia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:	item707	145	Metre
704	704	Supply and fixing 50 mmdia 2mm thick 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:	item708	145	Metre
705	705	Supplying and fixing of following Metal Boxes for Model Range Legrand (Arteor), Anchor (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) in surface / recessed system complete as per direction of department. 1-2 Module Type Metal	item709	8388	Each
706	706	Supplying and fixing of following Metal Boxes for Model Range Legrand (Arteor), Anchor (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) in surface / recessed system complete as per direction of department. 3 Module Type Metal	item710	10903	Each
707	707	Supplying and fixing of following Metal Boxes for Model Range Legrand (Arteor), Anchor (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) in surface / recessed system complete as per direction of department. 6 Module Type Metal	item711	7357	Each
708	708	Supplying and fixing of following Metal Boxes for Model Range Legrand (Arteor), Anchor (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) in surface / recessed system complete as per direction of department. 8 Module Type Metal	item712	17	Each
709	709	Supplying and fixing of following Metal Boxes for Model Range Legrand (Arteor), Anchor (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) in surface / recessed system complete as per direction of department. 12 Module Type Metal	item713	110	Each
710	710	Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 1 module	item714	1380	Each
711	711	Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 2 module	item715	7008	Each
712	712	Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 3 module	item716	10903	Each
713	713	Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 6 module	item717	7357	Each
714	714	Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 8 module	item718	17	Each
715	715	Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 12 module	item719	110	Each
716	716	Supplying including installation of socket outlet 6/10/13 Amps INTERNATIONAL SOCKET, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) including making necessary connections as per direction of department.	item720	14078	Each
717	717	Supplying with fitting fixing of 6/10 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.	item721	9121	Each
718	718	Supplying including installation of socket outlet 10/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.	item722	12785	Each
719	719	Supplying with fitting and fixing of 16 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) including making necessary connections as per direction of department.	item723	12040	Each
720	720	Supplying with fitting and fixing of 6 amp one way modular clip in bell push MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) including making necessary connections as per direction of department.	item724	136	Each
721	721	Supplying with fitting and fixing of 6/10 amp two way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) including making necessary connections as per direction of department.	item725	17	Each
722	722	20A Capacity. (ABB, Schneider MG, legrand, Hager make)	item727	218	Each
723	723	Supplying and fixing 32 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 32 A \"C\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.	item728	254	Each
724	724	Supplying fitting and fixing industrial plug & socket in surface mounted TPN sheet steel powder painted MCB DB incorporated with MCB DIN rail, neutral link Earth bar of the following rating of 4P MCB complete with making necessary connection etc. as specified and directed by the Dept. (ABB, Schneider MG, legrand, Hager make). 30/32A Capacity	item729	542	Each
725	725	Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door(IP-43) surface mounting SPN MCB DB incorporated with bus-bar, Neutral link, Earth Bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved , specified & directed by the dept. (ABB, Schneider MG, legrand, Hager, Crabtree xpro make). 8 way SPN double door	item730	71	Each
726	726	Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door(IP-43) surface mounting SPN MCB DB incorporated with bus-bar, Neutral link, Earth Bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved , specified & directed by the dept. (ABB, Schneider MG, legrand, Hager, Crabtree xpro make). 12 way SPN double door	item731	104	Each
727	727	Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 16 way, Double door	item732	75	Each
728	728	Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door(IP-43) surface mounting vertical per phase isolation (PP) DB incorporated with bus-bar 125A, Neutral link, Earth Bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved , specified & directed by the dept. (ABB, Schneider MG, legrand, Hager, Crabtree xpro make) 6 way TPN (8+6+18) double door	item733	70	Each
729	729	Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door(IP-43) surface mounting vertical per phase isolation (PP) DB incorporated with bus-bar 125A, Neutral link, Earth Bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved , specified & directed by the dept. (ABB, Schneider MG, legrand, Hager, Crabtree xpro make) 8 way TPN (8+6+24) double door	item734	228	Each
730	730	Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door(IP-43) surface mounting vertical per phase isolation (PP) DB incorporated with bus-bar 125A, Neutral link, Earth Bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved , specified & directed by the dept. (ABB, Schneider MG, legrand, Hager, Crabtree xpro make) 12 way TPN (8+6+36) double door	item735	555	Each
731	731	Supplying with fitting and fixing MCCB income and MCB outgoing sheet steel, phosphatised, powder painted double door IP-43 surface mounting vertical TPN MCB DB incorporated with bas-bar up to 250A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 4 way TPN (4+12) double door	item736	88	Each
732	732	Supplying with fitting and fixing MCCB income and MCB outgoing sheet steel, phosphatised, powder painted double door IP-43 surface mounting vertical TPN MCB DB incorporated with bas-bar up to 250A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 8way TPN (4+18) double door	item737	91	Each
733	733	Supplying with fitting and fixing MCCB income and MCB outgoing sheet steel, phosphatised, powder painted double door IP-43 surface mounting vertical TPN MCB DB incorporated with bas-bar up to 250A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 12 way TPN (4+36) double door	item738	11	Each
734	734	Supplying with fitting and fixing single pole 10KA 240/415V 50Hz MCB of the following capacity complete with making necessay connection as approved, specified and directed by the Dept. (Schneider MG, legrand, Hager, Crabtree xpro make) 6 to 32A	item739	23556	Each
735	735	Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, spcified and directed by the dept. ( ABB, Schneider MG, legrand, Hager, Crabtree xpro make) 25A	item740	361	Each
736	736	Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, spcified and directed by the dept. ( ABB, Schneider MG, legrand, Hager, Crabtree xpro make) 40A	item741	396	Each
737	737	Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, spcified and directed by the dept. ( ABB, Schneider MG, legrand, Hager, Crabtree xpro make) 63A	item742	2019	Each
738	738	100/300mA sensitivity DP RCCB 25A	item743	7	Each
739	739	100/300mA sensitivity DP RCCB 40A	item744	14	Each
740	740	100/300mA sensitivity DP RCCB 63A	item745	14	Each
741	741	Supplying with fitting and fixing TP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 6 to 32A	item746	197	Each
742	742	Supplying with fitting and fixing TP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 40A	item747	80	Each
743	743	Supplying with fitting and fixing TP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 63A	item748	932	Each
744	744	Supplying with fitting and fixing Surge protector of max operation voltage 350V at 400 V network for maximum discharge current 40KA with operator indicator and draw out cartridge of (Schneider or equivalent make), of the following ways complete with making necessary connection as approved, specified and directed by the dept. 1P+N	item749	74	Each
745	745	Supplying with fitting and fixing Surge protector of max operation voltage 350V at 400 V network for maximum discharge current 40KA with operator indicator and draw out cartridge of (Schneider or equivalent make), of the following ways complete with making necessary connection as approved, specified and directed by the dept. 3P+N	item750	795	Each
746	746	Supplying, installation of pre galvanised sheet steel std thickness 1.6mm under floor / ceiling trunking including necessary nuts & bolts, washer etc. as required, as directed and specified by the department. ( MK/ LEGRAND make) Size 100X38X1.6/1 compartment	item751	3360	Metre
747	747	Supplying, installation of pre galvanised sheet steel std thickness 1.6mm under floor / ceiling trunking including necessary nuts & bolts, washer etc. as required, as directed and specified by the department. ( MK/ LEGRAND make) Size 150X38X1.6/2 compartment	item752	2117	Metre
748	748	Supplying, installation of pre galvanised sheet steel std thickness 1.6mm under floor / ceiling trunking including necessary nuts & bolts, washer etc. as required, as directed and specified by the department. ( MK/ LEGRAND make) Size 225X38X1.6/3 compartment	item753	1130	Metre
749	749	Supplying, installation of pre galvanised sheet steel std thickness 1.6mm under floor / ceiling trunking including necessary nuts & bolts, washer etc. as required, as directed and specified by the department. ( MK/ LEGRAND make) Size 250X38X1.6/3 compartment	item754	1765	Metre
750	750	Supplying, installation of pre galvanised sheet steel std thickness 1.6mm under floor / ceiling trunking including necessary nuts & bolts, washer etc. as required, as directed and specified by the department. ( MK/ LEGRAND make) Size 300X38X1.6/3 compartment	item755	181	Metre
751	751	JUNCTION BOX 150X150X60 - 75 mm Depth	item756	468	Each
752	752	JUNCTION BOX 250X250X60 - 75 mm Depth	item757	316	Each
753	753	JUNCTION BOX 300X300X60 - 75 mm Depth	item758	237	Each
754	754	JUNCTION BOX 350X350X60 - 75 mm Depth	item759	14	Each
755	755	JOINT SLEEVE 100/1/6 FOR 38mm	item760	206	Each
756	756	JOINT SLEEVE 150/2/6 FOR 38mm	item761	109	Each
757	757	JOINT SLEEVE 225/3/6 FOR 38mm	item762	80	Each
758	758	JOINT SLEEVE 250/3/6 FOR 38mm	item763	63	Each
759	759	JOINT SLEEVE 300/3/6 FOR 38mm	item764	12	Each
760	760	Cross over/ Junction box Cross over 250X250X60 - 75mm 3 compartments	item765	29	Each
761	761	Cross over/ Junction box Cross over 300X300X60 - 75mm 3 compartments	item766	14	Each
762	762	Cross over/ Junction box Cross over 350X350X60 - 75mm 3 compartments	item767	7	Each
763	763	Supplying including fitting and fixing of TV SOCKET, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) including making necessary connections as per direction of department.	item768	873	Each
764	764	Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.	item769	25338	Meter
765	765	Supply, erection, testing and commissioning of following sizes of splitter of aluminium die cast body in suitable size of G.I. Box. 6 way	item770	71	Each
766	766	Supply, erection, testing and commissioning of following sizes of splitter of aluminium die cast body in suitable size of G.I. Box. 8 way	item771	99	Each
767	767	ELECTRICAL PANEL GROUND FLOOR (JUNIOR RESIDENT) - Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. INCOMING 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. BUS BARS 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. OUTGOING METERING 2 Nos Single Phase KWHr Meter Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item772	1	Set
768	768	METER BOARD - 1 FIRST FLOOR (JUNIOR RESIDENT) - Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. INCOMING 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. BUS BARS 100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. OUTGOING METERING 4 Nos Single Phase KWHr Meter Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item773	1	Set
769	769	METER BOARD - 2 TYPICAL FOR 2ND TO 6TH FLOOR (JUNIOR RESIDENT) - Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. INCOMING 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. BUS BARS 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. OUTGOING METERING 10 Nos Single Phase KWHr Meter Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item774	5	Set
770	770	ELECTRICAL PANEL GROUND FLOOR (DG SUPPLY) (JUNIOR RESIDENT) (TYPICAL FOR SENIOR RESIDENT) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. INCOMING 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. BUS BARS 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item775	2	Set
771	771	LIFT PANEL (JUNIOR RESIDENT) (TYPICAL FOR SENIOR RESIDENT) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. INCOMING 1 No Fixed type Automatic transfer switch 100 Amp rating in open frame with live to live transfer time <150ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. BUS BARS 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item776	2	Set
772	772	ELECTRICAL PANEL GROUND FLOOR (NON DG SUPPLY) (SENIOR RESIDENT) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. INCOMMING 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. BUS BARS 200 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item777	1	Set
773	773	METER BOARD - 1 TYPICAL FOR GROUND TO 3RD FLOOR (SENIOR RESIDENT) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. BUS BARS 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. 6 Nos Single Phase KWHr Meter Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item778	4	Set
774	774	ELECTRICAL PANEL GROUND FLOOR (NON DG SUPPLY) (FEMALE INTERN HOSTEL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. BUS BARS 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. 6 Nos Single Phase KWHr Meter Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item779	1	Set
775	775	ELECTRICAL PANEL GROUND FLOOR (DG SUPPLY) (FEMALE INTERN HOSTEL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. BUS BARS 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item780	1	Set
776	776	METER BOARD - 1 FIRST FLOOR (FEMALE INTERN HOSTEL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. BUS BARS 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. 9 Nos Single Phase KWHr Meter Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item781	1	Set
777	777	METER BOARD - 2 TYPICAL FOR 2ND & 3RD FLOOR (FEMALE INTERN HOSTEL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. BUS BARS 100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. 9 Nos Single Phase KWHr Meter Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item782	2	Set
778	778	LIFT PANEL (FEMALE INTERN HOSTEL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No Fixed type Automatic transfer switch 100 Amp rating in open frame with live to live transfer time <150ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. BUS BARS 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item783	1	Set
779	779	ELECTRICAL PANEL GROUND FLOOR (NON DG SUPPLY) (MALE INTERN HOSTEL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item784	1	Set
780	780	ELECTRICAL PANEL GROUND FLOOR (DG SUPPLY) (MALE INTERN HOSTEL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item785	1	Set
781	781	METER BOARD - 1 TYPICAL FOR 1ST & 2ND FLOOR (MALE INTERN HOSTEL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. 13 Nos Single Phase KWHr Meter. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item786	2	Set
782	782	LIFT PANEL (MALE INTERN HOSTEL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No Fixed type Automatic transfer switch 100 Amp rating in open frame with live to live transfer time <150ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item787	1	Set
783	783	ELECTRICAL PANEL GROUND FLOOR (NON DG SUPPLY) (NURSE HOSTEL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item788	1	Set
784	784	ELECTRICAL PANEL GROUND FLOOR (DG SUPPLY) (NURSE HOSTEL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item789	1	Set
785	785	METER BOARD - 1 TYPICAL FOR GROUND & FIRST FLOOR (NURSE HOSTEL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. 4 Nos Single Phase KWHr Meter. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item790	2	Set
786	786	METER BOARD - 2 TYPICAL FOR 2ND TO 7TH FLOOR (NURSE HOSTEL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. 8 Nos Single Phase KWHr Meter. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item791	6	Set
787	787	LIFT PANEL (NURSE HOSTEL)Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No Fixed type Automatic transfer switch 100 Amp rating in open frame with live to live transfer time <150ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item792	1	Set
788	788	ELECTRICAL PANEL GROUND FLOOR (NON DG SUPPLY) (BOY'S HOSTEL) (TYPICAL FOR GIRLS HOSTEL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 500 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item793	2	Set
789	789	ELECTRICAL PANEL GROUND FLOOR (DG SUPPLY) (BOY'S HOSTEL) (TYPICAL FOR GIRLS HOSTEL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item794	2	Set
790	790	ELECTRICAL PANEL-1 FOR GROUND & FIRST FLOOR (TYPICAL FOR 2ND & 3RD FLOOR) (BOY'S HOSTEL) (TYPICAL FOR GIRL'S HOSTEL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 200 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item795	4	Set
791	791	KITCHEN PANEL (BOY'S HOSTEL) (TYPICAL FOR GIRL'S HOSTEL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item796	2	Set
792	792	LIFT PANEL (BOY'S HOSTEL) (TYPICAL FOR GIRL'S HOSTEL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No Fixed type Automatic transfer switch 100 Amp rating in open frame with live to live transfer time <150ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item797	2	Set
793	793	ELECTRICAL PANEL GROUND FLOOR (DG SUPPLY) (TYPE-II & III RESIDENCE) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 200 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item798	1	Set
794	794	ELECTRICAL PANEL GROUND FLOOR (DG SUPPLY) (TYPICAL FOR TYPE-IV&V) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 200 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. 2 Nos Single Phase KWHr Meter. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item799	1	Set
795	795	METER BOARD - 1 TYPICAL FOR GROUND TO 17TH FLOOR (TYPE-II & III) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. 4 Nos Single Phase KWHr Meter. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item800	18	Set
796	796	LIFT PANEL (TYPE-II RESIDENCE) (TYPICAL FOR TYPE-II & III, TYPE-IV&V) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No Fixed type Automatic transfer switch 100 Amp rating in open frame with live to live transfer time <150ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item801	2	Set
797	797	METER BOARD - 1 TYPICAL FOR GROUND TO 1ST FLOOR (TYPE-IV&V) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. 3 Nos Single Phase KWHr Meter. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item802	2	Set
798	798	METER BOARD -2 TYPICAL FOR SECOND TO 7TH FLOOR (TYPE-IV&V) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. 3 Nos Single Phase KWHr Meter. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item803	6	Set
799	799	METER BOARD -3, 8TH FLOOR (TYPE-IV&V) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. 4 Nos Single Phase KWHr Meter. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item804	1	Set
800	800	METER BOARD -4 (NINENTH FLOOR) (DIRECTOR'S RESIDENCE) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item805	2	Set
801	801	ELECTRICAL PANEL (NON DG BACK UP) (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 2 No. Digital Multifunction Meter with inbuilt selector switch. 2 Set of phase indicating lamps with Single Pole MCB. 2 Set of ON / OFF indicating lamps with Single Pole MCB. 2000 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. The Bus Coupler shall be Electrically / Mechanically interlocked with both the incomers. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item806	1	Set
802	802	ELECTRICAL PANEL (DG BACK UP) (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 2 No. Digital Multifunction Meter with inbuilt selector switch. 2 Set of phase indicating lamps with Single Pole MCB. 2 Set of ON / OFF indicating lamps with Single Pole MCB. 1600 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. The Bus Coupler shall be Electrically / Mechanically interlocked with both the incomers. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item807	1	Set
803	803	MEDICAL EQUIPMENT PANEL (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 2 No. Digital Multifunction Meter with inbuilt selector switch. 2 Set of phase indicating lamps with Single Pole MCB. 2 Set of ON / OFF indicating lamps with Single Pole MCB. 1600 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item808	2	Set
804	804	POWER+AHU PANEL-1 DG BACK UP (LEFT SIDE) (GROUND FLOOR) (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 400 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item809	2	Set
805	805	LIFT & STAIRCASE VENTILATION PANEL-1 (LEFT SIDE) (TERRACE FLOOR) (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item810	2	Set
806	806	LAB PANEL-1 (MID SIDE) (FIRST FLOOR) (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 400 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item811	2	Set
807	807	UPS PANEL-1 (GROUND FLOOR, UPPER SIDE), TYPICAL FOR UPS PANEL-3 (THIRD FLOOR, LEFT SIDE), UPS PANEL-5 (7TH FLOOR, LEFT SIDE), UPS PANEL-2 (FIRST FLOOR, MID SIDE), UPS PANEL-3 (SECOND FLOOR, MID SIDE), (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No Fixed type Automatic transfer switch 63 Amp rating in open frame with live to live transfer time <150ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item812	5	Set
808	808	UPS PANEL-1 (GROUND FLOOR, LEFT SIDE), TYPICAL FOR UPS PANEL-2 (2ND FLOOR, LEFT SIDE), UPS PANEL-4 (4TH FLOOR, LEFT SIDE), UPS PANEL-1 (GROUND FLOOR, MID SIDE), UPS PANEL-8 (7TH FLOOR MID SIDE), UPS PANEL-1 (GROUND FLOOR RIGHT SIDE), UPS PANEL-2 (2ND FLOOR RIGHT SIDE), UPS PANEL-3 (3RD FLOOR RIGHT SIDE), UPS PANEL-4 (6TH FLOOR RIGHT SIDE), UPS PANEL-5 (7TH FLOOR RIGHT SIDE) (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No Fixed type Automatic transfer switch 63 Amp rating in open frame with live to live transfer time <150ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item813	10	Set
809	809	EMERGENCY LIGHT PANEL-1 (GROUND FLOOR, MID SIDE), TYPICAL FOR EMERGENCY LIGHT PANEL-2 (BASEMENT FLOOR, LEFT SIDE), (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item814	4	Set
810	810	EMERGENCY LIGHT PANEL-3 (GROUND FLOOR, RIGHT SIDE) (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item815	1	Set
811	811	LIFT & STAIRCASE VENTILATION PANEL-1 (RIGHT SIDE) (TERRACE FLOOR) (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch . 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve.Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item816	2	Set
812	812	UPS PANEL-5 (4TH FLOOR MID SIDE), TYPICAL FOR UPS PANEL-6 (5TH FLOOR MID SIDE), (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No Fixed type Automatic transfer switch 100 Amp rating in open frame with live to live transfer time <150ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item817	18	Set
813	813	UPS PANEL-4 (3RD FLOOR MID SIDE), (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No Fixed type Automatic transfer switch 63 Amp rating in open frame with live to live transfer time <150ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item818	1	Set
814	814	UPS PANEL-7 (6TH FLOOR MID SIDE), (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No Fixed type Automatic transfer switch 63 Amp rating in open frame with live to live transfer time <150ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item819	1	Set
815	815	MAIN UPS PANEL GROUND FLOOR (3 X 160 KVA) (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 3 No. Digital Multifunction Meter with inbuilt selector switch. 3 Set of phase indicating lamps with Single Pole MCB. 3 Set of ON / OFF indicating lamps with Single Pole MCB. 630 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item820	2	Set
816	816	INCOMING OT PANEL-1 (2X25 KVA UPS) (THIRD FLOOR) (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No Fixed type Automatic transfer switch 63 Amp rating in open frame with live to live transfer time <150ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item821	2	Set
817	817	INCOMING OT PANEL-2 (3X40 KVA UPS) (SIXTH FLOOR) (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No Fixed type Automatic transfer switch 160 Amp rating in open frame with live to live transfer time <150ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 200 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item822	2	Set
818	818	3X40 KVA UPS OUTGOING PANEL-1 FOR OT (SIXTH FLOOR) (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 3 No. Digital Multifunction Meter with inbuilt selector switch. 3 Set of phase indicating lamps with Single Pole MCB. 3 Set of ON / OFF indicating lamps with Single Pole MCB. 250 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item823	2	Set
819	819	2X25 KVA UPS OUTGOING PANEL-1 (THIRD FLOOR) (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 2 No. Digital Multifunction Meter with inbuilt selector switch. 2 Set of phase indicating lamps with Single Pole MCB. 2 Set of ON / OFF indicating lamps with Single Pole MCB. 100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item824	2	Set
820	820	2X15KVA UPS PANEL (GROUND FLOOR) (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 2 Nos. 63A DP MCCB, 25KA breaking capacity. 2 No. Digital Multifunction Meter with inbuilt selector switch. 2 Set of phase indicating lamps with Single Pole MCB. 2 Set of ON / OFF indicating lamps with Single Pole MCB. 100 Amp DP aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item825	2	Set
821	821	LIFT PANEL-1 (TERRANCE M/C ROOM) (LEFT SIDE) (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No Fixed type Automatic transfer switch 160 Amp rating in open frame with live to live transfer time <150ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 250 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item826	2	Set
822	822	LIFT PANEL-2 (TERRANCE M/C ROOM) (LEFT SIDE), TYPICAL FOR LIFT PANEL-1 (TERRANCE M/C ROOM), LIFT PANEL-1 (TERRANCE M/C ROOM) (RIGHT SIDE) (MID SIDE)(TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No Fixed type Automatic transfer switch 63 Amp rating in open frame with live to live transfer time <150ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 100 Amp/ 200 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item827	5	Set
823	823	LIFT PANEL-1 (TERRANCE M/C ROOM) (RIGHT SIDE) (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No Fixed type Automatic transfer switch 250 Amp rating in open frame with live to live transfer time <150ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 400 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item828	2	Set
824	824	MAIN ELECTRICAL PANEL-1 DG BACK UP (GROUND FLOOR) (ACADEMIC BLOCK) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 800 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item829	1	Set
825	825	MAIN ELECTRICAL PANEL-2 NON DG BACK UP (GROUND FLOOR) (ACADEMIC BLOCK) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. The Bus Coupler shall be Electrically / Mechanically interlocked with both the incomers. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item830	1	Set
826	826	MAIN UPS PANEL (3 X 40 KVA) (GROUND FLOOR) (ACADEMIC BLOCK) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 3 No. Digital Multifunction Meter with inbuilt selector switch. 3 Set of phase indicating lamps with Single Pole MCB. 3 Set of ON / OFF indicating lamps with Single Pole MCB. 300 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item831	1	Set
827	827	KITCHEN PANEL (ACADEMIC BLOCK) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 200 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item833	1	Set
828	828	LIFT PANEL-1 (TERRACE M/C ROOM) (ACADEMIC BLOCK) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No Fixed type Automatic transfer switch 100 Amp rating in open frame with live to live transfer time <150ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item834	1	Set
829	829	LIFT PANEL-2 (TERRACE M/C ROOM) (ACADEMIC BLOCK) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 300 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item835	1	Set
830	830	VENTILATION PANEL (ACADEMIC BLOCK) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item836	1	Set
831	831	ELECTRICAL PANEL (BMW BLOCK) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 1 No. Digital Multifunction Meter with inbuilt selector switch. 1 Set of phase indicating lamps with Single Pole MCB. 1 Set of ON / OFF indicating lamps with Single Pole MCB. 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item837	2	Set
832	832	MAIN UPS PANEL GROUND FLOOR (4 X 160 KVA) (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 3 No. Digital Multifunction Meter with inbuilt selector switch. 3 Set of phase indicating lamps with Single Pole MCB. 3 Set of ON / OFF indicating lamps with Single Pole MCB. 1000 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item838	1	Set
833	833	3X15KVA UPS PANEL (GROUND FLOOR) (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 3 Nos. 63A DP MCCB, 25KA breaking capacity. 3 Nos. Digital Multifunction Meter with inbuilt selector switch. 3 Set of phase indicating lamps with Single Pole MCB. 3 Set of ON / OFF indicating lamps with Single Pole MCB. 200 Amp DP aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item839	1	Set
834	834	3X15KVA UPS PANEL (GROUND FLOOR) (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 3 Nos. 63A DP MCCB, 25KA breaking capacity. 3 Nos. Digital Multifunction Meter with inbuilt selector switch. 3 Set of phase indicating lamps with Single Pole MCB. 3 Set of ON / OFF indicating lamps with Single Pole MCB. 200 Amp DP aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item840	1	Set
835	835	3X20 KVA UPS OUTGOING PANEL-1 (THIRD FLOOR) (TEACHING HOSPITAL) Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation, testing & commissioning of cubicle type totally enclosed free standing type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital AVF meter with inbuilt selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the dual source energy meter shall be with RS 485 port for BMS Connectivity. 3 No. Digital Multifunction Meter with inbuilt selector switch. 3 Set of phase indicating lamps with Single Pole MCB. 3 Set of ON / OFF indicating lamps with Single Pole MCB. 300 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. Panel described as above (Incomming / Outgoing MCCB / MCB shall be paid seperately. However the fabrication cost for Incomming / Outgoing shall be included in above.)	item841	1	Set
836	836	Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series\n(ABB, Schneider MG, legrand, Hager make) 6 to 32A	item842	145	Each
837	837	Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series\n(ABB, Schneider MG, legrand, Hager make) 40A	item843	430	Each
838	838	Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series\n(ABB, Schneider MG, legrand, Hager make) 63A	item844	56	Each
839	839	Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager make) 6 to 32A	item847	462	Each
840	840	Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager make) 40A	item849	171	Each
841	841	Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager make) 63A	item850	763	Each
842	842	Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 25 KA 415V 50 Hz 4P MCCB (Schneider, legrand, Siemens, Indo Asian make) 40A	item851	2	Each
843	843	Supplying with fitting and fixing panel mounting open execution 415V 50Hz 4P MCCB with Microprocessor Release (Ics=Icu, adjustable Over Load and Short Circuit setting, Without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 36KA (ABB, Schneider, legrand, L&T, Siemens, C&S make) 40A	item852	8	Each
844	844	Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 25 KA 415V 50 Hz 4P MCCB (Schneider, legrand, Siemens, Indo Asian make) 63A	item854	294	Each
845	845	Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 25 KA 415V 50 Hz 4P MCCB (Schneider, legrand, Siemens, Indo Asian make) 100A	item855	78	Each
846	846	Supplying with fitting and fixing panel mounting open execution 415V 50Hz 4P MCCB with Microprocessor Release (Ics=Icu, adjustable Over Load and Short Circuit setting, Without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 36KA (ABB, Schneider, legrand, L&T, Siemens, C&S make) 100A	item858	172	Each
847	847	Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 160A	item859	55	Each
848	848	Supplying with fitting and fixing panel mounting open execution 415V 50Hz 4P MCCB with Microprocessor Release (Ics=Icu, adjustable Over Load and Short Circuit setting, Without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 36KA (ABB, Schneider, legrand, L&T, Siemens, C&S make) 160A	item860	39	Each
849	849	Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 250A	item861	7	Each
850	850	Supplying with fitting and fixing panel mounting open execution 415V 50Hz 4P MCCB with Microprocessor Release (Ics=Icu, adjustable Over Load and Short Circuit setting, Without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 36KA (ABB, Schneider, legrand, L&T, Siemens, C&S make) 250A	item863	55	Each
851	851	Supplying with fitting & fixing panel mounting open execution 415V 50Hz 4P MCCB with microprocessor Release (Ics=Icu, adjustable over Load and Short Circuit setting, neutral adjustable with earth fault protection without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the dept. 50KA ( ABB, Schneider MG, legrand, Hager C&S, L&T, Siemens make) 250A	item864	23	Each
852	852	Supplying with fitting and fixing panel mounting open execution 415V 50Hz 4P MCCB with Microprocessor Release (Ics=Icu, adjustable Over Load and Short Circuit setting, Without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 36KA (ABB, Schneider, legrand, L&T, Siemens, C&S make) 400A	item866	26	Each
853	853	Supplying with fitting and fixing panel mounting open execution 415V 50Hz 4P MCCB with Microprocessor Release (Ics=Icu, adjustable Over Load and Short Circuit setting, Without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 36KA (ABB, Schneider, legrand, L&T, Siemens, C&S make) 630A	item868	20	Each
854	854	Supplying with fitting and fixing panel mounting open execution 415V 50Hz 4P MCCB with Microprocessor Release (Ics=Icu, adjustable Over Load and Short Circuit setting, Without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 50KA (ABB, Schneider, legrand, L&T, Siemens, C&S make) 800A	item869	6	Each
855	855	Supplying with fitting & fixing panel mounting open execution 415V 50Hz 4P MCCB with microprocessor Release (Ics=Icu, adjustable over Load and Short Circuit setting, neutral adjustable with earth fault protection without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the dept. 65KA ( ABB, Schneider MG, legrand, Hager C&S, L&T, Siemens make) 800A	item870	4	Each
856	856	Supplying with fitting & fixing panel mounting open execution 415V 50Hz 4P MCCB with microprocessor Release (Ics=Icu, adjustable over Load and Short Circuit setting, neutral adjustable with earth fault protection without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the dept. 50KA ( ABB, Schneider MG, legrand, Hager C&S, L&T, Siemens make) 1000A	item872	4	Each
857	857	Supplying with fitting and fixing panel mounting open execution 4 pole Air Circuit Breaker type (MDO/EDO) with guide frame and 4 standard auxiliary contacts in the existing cubical panel board of the following capacity complete with making necessary connection as specified and directed by the deptt. (ABB Emax/L & T U Power/ Siemens 3 WL/ Schneider Master pact NW) 1000A Breaking capacity @ Ics = 50 KA (MDO)	item873	3	Each
858	858	Supplying with fitting and fixing panel mounting open execution 4 pole Air Circuit Breaker type (MDO/EDO) with guide frame and 4 standard auxiliary contacts in the existing cubical panel board of the following capacity complete with making necessary connection as specified and directed by the deptt. (ABB Emax/L & T U Power/ Siemens 3 WL/ Schneider Master pact NW) 1250A Breaking capacity @ Ics = 50 KA (EDO) 1250A Breaking capacity @ Ics = 50 KA (EDO)	item875	9	Each
859	859	Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz 4P RCBO of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 300mA sensitivity 4P RCBO (Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.) 63A	item877	75	Each
860	860	Design and Supply of IP-55 Sandwich Rising mains with plug-outlets in every 850mm on both side of trunking of following capacity with Aluminium conductor , TPN with 100% neutral , 1000V, IP-55, 50 Hz , housing made from 1.5mm hot-galvanized sheet steel treated according to UNI 10327 and painted with RAL7035 resins with high resistance to chemical agents including End cover, supports and with two runs of GI earth Bar and complying with IEC-60439 I & . (Legrand/ C&S or equivalent as approved by the Deptt.) 630 amps Rising Mains ( SC rating for 1 sec- 36K	item878	164	Metre
861	861	Design and Supply of IP-55 Sandwich Rising mains with plug-outlets in every 850mm on both side of trunking of following capacity with Aluminium conductor , TPN with 100% neutral , 1000V, IP-55, 50 Hz , housing made from 1.5mm hot-galvanized sheet steel treated according to UNI 10327 and painted with RAL7035 resins with high resistance to chemical agents including End cover, supports and with two runs of GI earth Bar and complying with IEC-60439 I & . (Legrand/ C&S or equivalent as approved by the Deptt.) 800 amps Rising Mains ( SC rating for 1 sec- 42K	item879	154	Metre
862	862	Design and Supply of IP-55 Sandwich Rising mains with plug-outlets in every 850mm on both side of trunking of following capacity with Aluminium conductor , TPN with 100% neutral , 1000V, IP-55, 50 Hz , housing made from 1.5mm hot-galvanized sheet steel treated according to UNI 10327 and painted with RAL7035 resins with high resistance to chemical agents including End cover, supports and with two runs of GI earth Bar and complying with IEC-60439 I & . (Legrand/ C&S or equivalent as approved by the Deptt.) 1000 amps Rising Mains ( SC rating for 1 sec- 50K	item880	136	Metre
863	863	Supply of following capacity End Feed Unit Made of 1.6 mm thick sheet steel enclosure dully painted with powder coating to existing rising mains complete with provision of fixing MCCB. (Legrand/C&S or equivalent as approved by the deptt.) 630A End Feed Unit (W/0 MCCB)	item881	5	Each
864	864	Supply of following capacity End Feed Unit Made of 1.6 mm thick sheet steel enclosure dully painted with powder coating to existing rising mains complete with provision of fixing MCCB. (Legrand/C&S or equivalent as approved by the deptt.) 800A End Feed Unit (W/0 MCCB)	item882	4	Each
865	865	Supply of following capacity End Feed Unit Made of 1.6 mm thick sheet steel enclosure dully painted with powder coating to existing rising mains complete with provision of fixing MCCB. (Legrand/C&S or equivalent as approved by the deptt.) 1000A End Feed Unit (W/0 MCCB)	item883	4	Each
866	866	Supply of following capacity TPN Tap off box Made of 1.6 mm thick sheet steel enclosure dully painted with powder coating to existing rising mains complete with provision of fixing MCCB. (Legrand/C&S or equivalent as approved by the deptt.) 63A Tap-off Box with inbuilt Disconnection (Legrand/ C&S or equivalent as approved by the Deptt.) on Cover ( W/0 MCCB/HRC fuse)	item884	49	Each
867	867	Supply of following capacity TPN Tap off box Made of 1.6 mm thick sheet steel enclosure dully painted with powder coating to existing rising mains complete with provision of fixing MCCB. (Legrand/C&S or equivalent as approved by the deptt.) 125A Tap-off Box with inbuilt Disconnection (Legrand/ C&S or equivalent as approved by the Deptt.) on Cover ( W/0 MCCB/HRC fuse)	item885	37	Each
868	868	Supply of following capacity TPN Tap off box Made of 1.6 mm thick sheet steel enclosure dully painted with powder coating to existing rising mains complete with provision of fixing MCCB. (Legrand/C&S or equivalent as approved by the deptt.) 160A Tap-off Box with inbuilt Disconnection (Legrand/ C&S or equivalent as approved by the Deptt.) on Cover ( W/0 MCCB/HRC fuse)	item886	50	Each
869	869	Supply of following capacity TPN Tap off box Made of 1.6 mm thick sheet steel enclosure dully painted with powder coating to existing rising mains complete with provision of fixing MCCB. (Legrand/C&S or equivalent as approved by the deptt.) 250A Tap-off Box with inbuilt Disconnection (Legrand/ C&S or equivalent as approved by the Deptt.) on Cover ( W/0 MCCB/HRC fuse)	item887	8	Each
870	870	Supply of following capacity TPN Tap off box Made of 1.6 mm thick sheet steel enclosure dully painted with powder coating to existing rising mains complete with provision of fixing MCCB. (Legrand/C&S or equivalent as approved by the deptt.) 400/ 630A Tap-off Box with inbuilt Disconnection (Legrand/ C&S or equivalent as approved by the Deptt.) on Cover ( W/0 MCCB/HRC fuse)	item888	2	Each
871	871	Supply of following capacity TPN with 100% neutral ,1000V, 50 Hz , IP-55 Compact Air-Insulated Bus Bar Trunking compliance with IEC 60439 with Busbar made from Aluminium alloy with Copper + Tin coating over whole length of Busbar insulated and supported by Insulating materials in regular interval with ''omega shaped'' ribbed sealed section housing of size mentioned below made from Hot-galvanized steel of 0.8mm thick with having Plug-in -outlets in every 500mm, IK-10 category of mechanical strength including junction monobloc, joint cover, end cover, supports with GI earth bar and design is compliance with IEC 60439 I & II. (Legrand/ C&S or equivalent as approved by the Deptt.) 250 amps Rising Mains ( SC rating for 1 sec- 8KA,	item889	506	Metre
872	872	Supply of following capacity TPN with 100% neutral ,1000V, 50 Hz , IP-55 Compact Air-Insulated Bus Bar Trunking compliance with IEC 60439 with Busbar made from Aluminium alloy with Copper + Tin coating over whole length of Busbar insulated and supported by Insulating materials in regular interval with ''omega shaped'' ribbed sealed section housing of size mentioned below made from Hot-galvanized steel of 0.8mm thick with having Plug-in -outlets in every 500mm, IK-10 category of mechanical strength including junction monobloc, joint cover, end cover, supports with GI earth bar and design is compliance with IEC 60439 I & II. (Legrand/ C&S or equivalent as approved by the Deptt.) 400 amps Rising Mains ( SC rating for 1 sec- 25K	item891	254	Metre
873	873	Supply of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains with provision of fixing MCCB/HRC fuse . (Legrand/ C&S or equivalent as approved by the Deptt.) 63A Tap-off Box with inbuilt Disconnection (Legrand/ C&S or equivalent as approved by the Deptt.) on Cover ( W/0 MCCB/HRC fuse)	item892	135	Each
874	874	Supply of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains with provision of fixing MCCB/HRC fuse . (Legrand/ C&S or equivalent as approved by the Deptt.) 125A Tap-off Box with inbuilt Disconnection (Legrand/ C&S or equivalent as approved by the Deptt.) on Cover ( W/0 MCCB/HRC fuse)	item893	25	Each
875	875	Supply of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains with provision of fixing MCCB/HRC fuse . (Legrand/ C&S or equivalent as approved by the Deptt.) 160A Tap-off Box with inbuilt Disconnection (Legrand/ C&S or equivalent as approved by the Deptt.) on Cover ( W/0 MCCB/HRC fuse)	item894	6	Each
876	876	Supply of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains with provision of fixing MCCB/HRC fuse . (Legrand/ C&S or equivalent as approved by the Deptt.) 250A Tap-off Box with inbuilt Disconnection (Legrand/ C&S or equivalent as approved by the Deptt.) on Cover( W/0 MCCB/HRC fuse)	item895	1	Each
877	877	Supplying with fitting and fixing sheet steel, phosphatised, powder painted Single door surface mounting MCCB enclosure of the following rating MCCB fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) for 100A 3P/4P MCCB (including 63A)	item896	21	Each
878	878	Supplying with fitting and fixing sheet steel, phosphatised, powder painted Single door surface mounting MCCB enclosure of the following rating MCCB fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) for 160A 3P/4P MCCB	item897	6	Each
879	879	Supplying with fitting and fixing sheet steel, phosphatised, powder painted Single door surface mounting MCCB enclosure of the following rating MCCB fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) for 400/630A 3P/4P MCCB	item898	6	Each
880	880	Supplying with fitting and fixing sheet steel, phosphatised, powder painted Single door surface mounting MCB enclosure incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 4 way single door	item899	20	Each
881	881	Supply and laying of following size solid aluminium conductor up to 10 sq.mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured /armour (Aluminium for single core up to 70 sq.mm balance Aluminium strip, Galvanized for cables up to 2x10 sq.mm, 3x10 sq.mm, 4x6 sq.mm balance all galvanized steel strip), extruded PVC ST2 sheathed, 650/1100 V grade as per IS 7098 (Part1) 1988, laid in air or through existing cable trench / duct / cable tray / HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the department. (Nicco / Havells / RPG / CCI / Polycab / Gloster / Finolex make or equivalent.) Core-2 (A2XWay, A2XFaY) 6 sq.mm two core armoured cable	item900	1500	Meter
882	882	Supply and laying of following size solid aluminium conductor up to 10 sq.mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured /armour (Aluminium for single core up to 70 sq.mm balance Aluminium strip, Galvanized for cables up to 2x10 sq.mm, 3x10 sq.mm, 4x6 sq.mm balance all galvanized steel strip), extruded PVC ST2 sheathed, 650/1100 V grade as per IS 7098 (Part1) 1988, laid in air or through existing cable trench / duct / cable tray / HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the department. (Nicco / Havells / RPG / CCI / Polycab / Gloster / Finolex make or equivalent.) Core-2 (A2XWay, A2XFaY) 10 sq.mm two core armoured cable	item901	750	Meter
883	883	Supply and laying of following size solid aluminium conductor up to 10 sq.mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured /armour (Aluminium for single core up to 70 sq.mm balance Aluminium strip, Galvanized for cables up to 2x10 sq.mm, 3x10 sq.mm, 4x6 sq.mm balance all galvanized steel strip), extruded PVC ST2 sheathed, 650/1100 V grade as per IS 7098 (Part1) 1988, laid in air or through existing cable trench / duct / cable tray / HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the department. (Nicco / Havells / RPG / CCI / Polycab / Gloster / Finolex make or equivalent.) Core-3.5 (A2XFY) 35 sq.mm 3 and 1/2 core armoured cable	item902	1103	Meter
884	884	Supply and laying of following size solid aluminium conductor up to 10 sq.mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured /armour (Aluminium for single core up to 70 sq.mm balance Aluminium strip, Galvanized for cables up to 2x10 sq.mm, 3x10 sq.mm, 4x6 sq.mm balance all galvanized steel strip), extruded PVC ST2 sheathed, 650/1100 V grade as per IS 7098 (Part1) 1988, laid in air or through existing cable trench / duct / cable tray / HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the department. (Nicco / Havells / RPG / CCI / Polycab / Gloster / Finolex make or equivalent.) Core-3.5 (A2XFY) 50 sq.mm 3 and 1/2 core armoured cable	item903	429	Meter
885	885	Supply and laying of following size solid aluminium conductor up to 10 sq.mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured /armour (Aluminium for single core up to 70 sq.mm balance Aluminium strip, Galvanized for cables up to 2x10 sq.mm, 3x10 sq.mm, 4x6 sq.mm balance all galvanized steel strip), extruded PVC ST2 sheathed, 650/1100 V grade as per IS 7098 (Part1) 1988, laid in air or through existing cable trench / duct / cable tray / HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the department. (Nicco / Havells / RPG / CCI / Polycab / Gloster / Finolex make or equivalent.) Core-3.5 (A2XFY) 70 sq.mm 3 and 1/2 core armoured cable	item904	2674	Meter
886	886	Supply and laying of following size solid aluminium conductor up to 10 sq.mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured /armour (Aluminium for single core up to 70 sq.mm balance Aluminium strip, Galvanized for cables up to 2x10 sq.mm, 3x10 sq.mm, 4x6 sq.mm balance all galvanized steel strip), extruded PVC ST2 sheathed, 650/1100 V grade as per IS 7098 (Part1) 1988, laid in air or through existing cable trench / duct / cable tray / HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the department. (Nicco / Havells / RPG / CCI / Polycab / Gloster / Finolex make or equivalent.) Core-3.5 (A2XFY) 95 sq.mm 3 and 1/2 core armoured cable	item905	3148	Meter
887	887	Supply and laying of following size solid aluminium conductor up to 10 sq.mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured /armour (Aluminium for single core up to 70 sq.mm balance Aluminium strip, Galvanized for cables up to 2x10 sq.mm, 3x10 sq.mm, 4x6 sq.mm balance all galvanized steel strip), extruded PVC ST2 sheathed, 650/1100 V grade as per IS 7098 (Part1) 1988, laid in air or through existing cable trench / duct / cable tray / HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the department. (Nicco / Havells / RPG / CCI / Polycab / Gloster / Finolex make or equivalent.) Core-3.5 (A2XFY) 120 sq.mm 3 and 1/2 core armoured cable	item906	2120	Meter
888	888	Supply and laying of following size solid aluminium conductor up to 10 sq.mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured /armour (Aluminium for single core up to 70 sq.mm balance Aluminium strip, Galvanized for cables up to 2x10 sq.mm, 3x10 sq.mm, 4x6 sq.mm balance all galvanized steel strip), extruded PVC ST2 sheathed, 650/1100 V grade as per IS 7098 (Part1) 1988, laid in air or through existing cable trench / duct / cable tray / HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the department. (Nicco / Havells / RPG / CCI / Polycab / Gloster / Finolex make or equivalent.) Core-3.5 (A2XFY) 150 Sq.mm 3 and 1/2 core armoured cable	item907	1326	Meter
889	889	Supply and laying of following size solid aluminium conductor up to 10 sq.mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured /armour (Aluminium for single core up to 70 sq.mm balance Aluminium strip, Galvanized for cables up to 2x10 sq.mm, 3x10 sq.mm, 4x6 sq.mm balance all galvanized steel strip), extruded PVC ST2 sheathed, 650/1100 V grade as per IS 7098 (Part1) 1988, laid in air or through existing cable trench / duct / cable tray / HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the department. (Nicco / Havells / RPG / CCI / Polycab / Gloster / Finolex make or equivalent.) Core-3.5 (A2XFY) 185 sq.mm 3 and 1/2 core armoured cable	item908	108	Meter
890	890	Supply and laying of following size solid aluminium conductor up to 10 sq.mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured /armour (Aluminium for single core up to 70 sq.mm balance Aluminium strip, Galvanized for cables up to 2x10 sq.mm, 3x10 sq.mm, 4x6 sq.mm balance all galvanized steel strip), extruded PVC ST2 sheathed, 650/1100 V grade as per IS 7098 (Part1) 1988, laid in air or through existing cable trench / duct / cable tray / HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the department. (Nicco / Havells / RPG / CCI / Polycab / Gloster / Finolex make or equivalent.) Core-3.5 (A2XFY) 240 sq.mm 3 and 1/2 core armoured cable	item909	3244	Meter
891	891	Supply and laying of following size solid aluminium conductor up to 10 sq.mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured /armour (Aluminium for single core up to 70 sq.mm balance Aluminium strip, Galvanized for cables up to 2x10 sq.mm, 3x10 sq.mm, 4x6 sq.mm balance all galvanized steel strip), extruded PVC ST2 sheathed, 650/1100 V grade as per IS 7098 (Part1) 1988, laid in air or through existing cable trench / duct / cable tray / HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the department. (Nicco / Havells / RPG / CCI / Polycab / Gloster / Finolex make or equivalent.) Core-3.5 (A2XFY) 300 sq.mm 3 and 1/2 core armoured cable	item910	8226	Meter
892	892	Supply and laying of following size solid aluminium conductor up to 10 sq.mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured /armour (Aluminium for single core up to 70 sq.mm balance Aluminium strip, Galvanized for cables up to 2x10 sq.mm, 3x10 sq.mm, 4x6 sq.mm balance all galvanized steel strip), extruded PVC ST2 sheathed, 650/1100 V grade as per IS 7098 (Part1) 1988, laid in air or through existing cable trench / duct / cable tray / HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the department. (Nicco / Havells / RPG / CCI / Polycab / Gloster / Finolex make or equivalent.) Core-3.5 (A2XFY) 400.00 Sq.mm 3 and 1/2 core armoured cable	item911	8620	Meter
893	893	Supply and laying of following size solid aluminium conductor up to 10 sq.mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured /armour (Aluminium for single core up to 70 sq.mm balance Aluminium strip, Galvanized for cables up to 2x10 sq.mm, 3x10 sq.mm, 4x6 sq.mm balance all galvanized steel strip), extruded PVC ST2 sheathed, 650/1100 V grade as per IS 7098 (Part1) 1988, laid in air or through existing cable trench / duct / cable tray / HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the department. (Nicco / Havells / RPG / CCI / Polycab / Gloster / Finolex make or equivalent.) Core-4 (A2XWY, A2XFY) 25 sq.mm four core armoured cable	item912	601	Meter
894	894	Supply and laying of following size solid aluminium conductor up to 10 sq.mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured /armour (Aluminium for single core up to 70 sq.mm balance Aluminium strip, Galvanized for cables up to 2x10 sq.mm, 3x10 sq.mm, 4x6 sq.mm balance all galvanized steel strip), extruded PVC ST2 sheathed, 650/1100 V grade as per IS 7098 (Part1) 1988, laid in air or through existing cable trench / duct / cable tray / HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the department. (Nicco / Havells / RPG / CCI / Polycab / Gloster / Finolex make or equivalent.) 4 Core-4, 2XWY, 2XFY 4 sq.mm four core armoured cable	item913	2450	Meter
895	895	Supply and laying of following size solid aluminium conductor up to 10 sq.mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured /armour (Aluminium for single core up to 70 sq.mm balance Aluminium strip, Galvanized for cables up to 2x10 sq.mm, 3x10 sq.mm, 4x6 sq.mm balance all galvanized steel strip), extruded PVC ST2 sheathed, 650/1100 V grade as per IS 7098 (Part1) 1988, laid in air or through existing cable trench / duct / cable tray / HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the department. (Nicco / Havells / RPG / CCI / Polycab / Gloster / Finolex make or equivalent.) 4 Core-4, 2XWY, 2XFY 6 sq.mm four core armoured cable	item914	4690	Meter
896	896	Supply and laying of following size solid aluminium conductor up to 10 sq.mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured /armour (Aluminium for single core up to 70 sq.mm balance Aluminium strip, Galvanized for cables up to 2x10 sq.mm, 3x10 sq.mm, 4x6 sq.mm balance all galvanized steel strip), extruded PVC ST2 sheathed, 650/1100 V grade as per IS 7098 (Part1) 1988, laid in air or through existing cable trench / duct / cable tray / HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the department. (Nicco / Havells / RPG / CCI / Polycab / Gloster / Finolex make or equivalent.) 4 Core-4, 2XWY, 2XFY 10 sq.mm four core armoured cable	item915	2118	Meter
897	897	Supply and laying of following size solid aluminium conductor up to 10 sq.mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured /armour (Aluminium for single core up to 70 sq.mm balance Aluminium strip, Galvanized for cables up to 2x10 sq.mm, 3x10 sq.mm, 4x6 sq.mm balance all galvanized steel strip), extruded PVC ST2 sheathed, 650/1100 V grade as per IS 7098 (Part1) 1988, laid in air or through existing cable trench / duct / cable tray / HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the department. (Nicco / Havells / RPG / CCI / Polycab / Gloster / Finolex make or equivalent.) 4 Core-4, 2XWY, 2XFY 16 sq.mm four core armoured cable	item916	2934	Meter
898	898	Supply & Laying of following sizes of 1.1KV grade multistranded copper conductor FRLS insulated cable including termination complete as required in existing cable tray. 1C x 120 sq.mm PVC Insulated cu wire including end termination.	item917	648	Meter
899	899	Supply & Laying of following sizes of 1.1KV grade multistranded copper conductor FRLS insulated cable including termination complete as required in existing cable tray. 1C x 6 sq.mm PVC Insulated cu wire including end termination.	item918	576	Meter
900	900	Supply & Laying of following sizes of 1.1KV grade multistranded copper conductor FRLS insulated cable including termination complete as required in existing cable tray. 1C x 35 sq.mm PVC Insulated cu wire including end termination.	item919	918	Meter
901	901	Supply & Laying of following sizes of 1.1KV grade multistranded copper conductor FRLS insulated cable including termination complete as required in existing cable tray. 1C x 16 sq.mm PVC Insulated cu wire including end termination.	item920	864	Meter
902	902	Supply, Installation, Testing & Commissioning of Earthing Junction Box size - 400mm x 300mm x 80mm made out of 16 SWG CRCA sheet with seven tank process & powder coating, earthing link (32mmx6mm copper strip), front door with glass as complete as required.	item921	12	Set
903	903	Supplying Fitting and Fixing of (Dowells / Commet make) Single compression brass gland heavy duty. Single Compression Brass Gland Heavy Duty. Size:1''	item922	1266	Each
904	904	Supplying Fitting and Fixing of (Dowells / Commet make) Single compression brass gland heavy duty. Single Compression Brass Gland Heavy Duty. Size:1-1/8''	item923	308	Each
905	905	Supplying Fitting and Fixing of (Dowells / Commet make) Single compression brass gland heavy duty. Single Compression Brass Gland Heavy Duty. Size:1-1/4''	item924	64	Each
906	906	Supplying Fitting and Fixing of (Dowells / Commet make) Single compression brass gland heavy duty. Single Compression Brass Gland Heavy Duty. Size:1-3/8''	item925	126	Each
907	907	Supplying Fitting and Fixing of (Dowells / Commet make) Single compression brass gland heavy duty. Single Compression Brass Gland Heavy Duty. Size:1-1/2''	item926	56	Each
908	908	Supplying Fitting and Fixing of (Dowells / Commet make) Single compression brass gland heavy duty. Single Compression Brass Gland Heavy Duty. Size:1-3/4''	item927	150	Each
909	909	Supplying Fitting and Fixing of (Dowells / Commet make) Single compression brass gland heavy duty. Single Compression Brass Gland Heavy Duty. Size:2-1/4''	item928	52	Each
910	910	Supplying Fitting and Fixing of (Dowells / Commet make) Single compression brass gland heavy duty. Single Compression Brass Gland Heavy Duty. Size:2-3/4''	item929	286	Each
911	911	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness.	item930	3150	Metre
912	912	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm wide x 50 mm depth x 1.6 mm thickness.	item931	1865	Metre
913	913	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 300 mm wide x 50 mm depth x 1.6 mm thickness.	item932	754	Metre
914	914	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 450 mm wide x 50 mm depth x 2.0 mm thickness.	item933	375	Metre
915	915	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 600 mm width X 50 mm depth X 2.0 mm thickness	item934	930	Metre
916	916	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 750 mm width X 62.5 mm depth X 2.0 mm thickness	item935	145	Metre
917	917	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 900 mm width X 62.5 mm depth X 2.0 mm thickness	item936	51	Metre
918	918	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"bends\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness.	item937	185	Each
919	919	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"bends\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm wide x 50 mm depth x 1.6 mm thickness.	item938	132	Each
920	920	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"bends\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 300 mm wide x 50 mm depth x 1.6 mm thickness.	item939	77	Each
921	921	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"bends\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 450 mm wide x 50 mm depth x 2.0 mm thickness.	item940	50	Each
922	922	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"bends\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 600 mm width X 50 mm depth X 2.0 mm thickness	item941	84	Each
923	923	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"bends\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 750 mm width X 62.5 mm depth X 2.0 mm thickness	item942	12	Each
924	924	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"bends\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 900 mm width X 62.5 mm depth X 2.0 mm thickness	item943	7	Each
925	925	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"Tee\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness.	item944	88	Each
926	926	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"Tee\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm wide x 50 mm depth x 1.6 mm thickness.	item945	74	Each
927	927	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"Tee\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 300 mm wide x 50 mm depth x 1.6 mm thickness.	item946	29	Each
928	928	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"Tee\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 450 mm wide x 50 mm depth x 2.0 mm thickness.	item947	12	Each
929	929	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"Tee\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 600 mm width X 50 mm depth X 2.0 mm thickness	item948	8	Each
930	930	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"Tee\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 750 mm width X 62.5 mm depth X 2.0 mm thickness	item949	6	Each
931	931	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"Tee\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 900 mm width X 62.5 mm depth X 2.0 mm thickness	item950	7	Each
932	932	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"Cross member\"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 100 mm wide x 50 mm depth x 1.6 mm thickness.	item951	29	Each
933	933	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"Cross member\"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 150 mm wide x 50 mm depth x 1.6 mm thickness.	item952	16	Each
934	934	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"Cross member\"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 300 mm wide x 50 mm depth x 1.6 mm thickness.	item953	11	Each
935	935	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"Cross member\"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 450 mm wide x 50 mm depth x 2.0 mm thickness.	item954	6	Each
936	936	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"Cross member\"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 600 mm width X 50 mm depth X 2.0 mm thickness	item955	6	Each
937	937	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"Cross member\"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 750 mm width X 62.5 mm depth X 2.0 mm thickness	item956	5	Each
938	938	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"Cross member\"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 900 mm width X 62.5 mm depth X 2.0 mm thickness	item957	6	Each
939	939	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Reducer” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm wide x 50 mm depth x 1.6 mm thickness.	item958	22	Each
940	940	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Reducer” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 300 mm wide x 50 mm depth x 1.6 mm thickness.	item959	26	Each
941	941	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Reducer” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 450 mm wide x 50 mm depth x 2.0 mm thickness.	item960	14	Each
942	942	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Reducer” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 600 mm width X 50 mm depth X 2.0 mm thickness	item961	26	Each
943	943	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Reducer” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 750 mm width X 62.5 mm depth X 2.0 mm thickness	item962	7	Each
944	944	Cable Tray Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Reducer” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 900 mm width X 62.5 mm depth X 2.0 mm thickness	item963	7	Each
945	945	Supply and laying of following sizes of 1.1KV grade Aluminium conductor XLPE insulated and FRLS PVC sheathed Fire Survival armoured cable conforming to relevant BS-7846. (Cable shall be purchased only after approval of cable schedule by architect / consultant). 3.5 core, 120 sq.mm. Aluminium Cond Fire Survival Cable	item964	228	Meter
946	946	Supply and laying of following sizes of 1.1KV grade Aluminium conductor XLPE insulated and FRLS PVC sheathed Fire Survival armoured cable conforming to relevant BS-7846. (Cable shall be purchased only after approval of cable schedule by architect / consultant). 3.5 core, 95 sq.mm. Aluminium Cond Fire Survival Cable	item965	406	Meter
947	947	Supply and laying of following sizes of 1.1KV grade Aluminium conductor XLPE insulated and FRLS PVC sheathed Fire Survival armoured cable conforming to relevant BS-7846. (Cable shall be purchased only after approval of cable schedule by architect / consultant). 3.5 core, 50 sq.mm. Aluminium Cond Fire Survival Cable	item966	144	Meter
948	948	Supply and laying of following sizes of 1.1KV grade Aluminium conductor XLPE insulated and FRLS PVC sheathed Fire Survival armoured cable conforming to relevant BS-7846. (Cable shall be purchased only after approval of cable schedule by architect / consultant). 3.5 core, 35 sq.mm. Aluminium Cond Fire Survival Cable	item967	474	Meter
949	949	Supply and laying of following sizes of 1.1KV grade Aluminium conductor XLPE insulated and FRLS PVC sheathed Fire Survival armoured cable conforming to relevant BS-7846. (Cable shall be purchased only after approval of cable schedule by architect / consultant). 4 core, 25 sq.mm. Aluminium Cond Fire Survival Cable	item968	310	Meter
950	950	Supply and laying of following sizes of 1.1KV grade Aluminium conductor XLPE insulated and FRLS PVC sheathed Fire Survival armoured cable conforming to relevant BS-7846. (Cable shall be purchased only after approval of cable schedule by architect / consultant). 4 core, 16 sq.mm. Aluminium Cond Fire Survival Cable	item969	1574	Meter
951	951	Supply and laying of following sizes of 1.1KV grade Aluminium conductor XLPE insulated and FRLS PVC sheathed Fire Survival armoured cable conforming to relevant BS-7846. (Cable shall be purchased only after approval of cable schedule by architect / consultant). 4 core, 10 sq.mm. Aluminium Cond Fire Survival Cable	item970	4746	Meter
952	952	Supply and laying of following sizes of 1.1KV grade Aluminium conductor XLPE insulated and FRLS PVC sheathed Fire Survival armoured cable conforming to relevant BS-7846. (Cable shall be purchased only after approval of cable schedule by architect / consultant). 4 core, 6 sq.mm. Aluminium Cond Fire Survival Cable	item971	2700	Meter
953	953	Supply, Installation, Testing & Commissioning of Recess LED Downlighter made of pressure die cast aluminum housing with high efficiency reflector, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) >=100lumens/watt, 1000 - 1200 lumen, Life of fixture (Including Driver) : 30K Hrs. @ L70B50 Lumen maintenance, CCT up to 6500 (SDCM<5), CRI >80, PF >0.95 & THD<10%, an operating Voltage Range of 140 - 270 V.Minimum Internal Surge Protection 2.0KV The fixture design should comply with IS10322, EMC / EMI compliance maintaining driver leakage current as per as per IEC 60598,Minimum system Lumens 1000-1200.	item972	52	Each
954	954	Supply, Installation, Testing & commissioning of Recess LED Downlighter made of pressure die cast aluminum housing with high efficiency reflector, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) >=100lumens/watt, 1600 - 1800 Lumen, Life of fixture (Including Driver) : 30K Hrs. @ L70B50 Lumen maintenance, CCT up to 6500 (SDCM<5), CRI >80, PF >0.95 & THD<10%, an operating Voltage Range of 140 - 270 V.Minimum Internal Surge Protection 2.0KV The fixture design should comply with IS10322, EMC / EMI compliance maintaining driver leakage current as per as per IEC 60598,Minimum system Lumens 1000.	item973	170	Each
955	955	Supply, Installation, Testing & commissioning of Recess LED Downlighter made of pressure die cast aluminum housing with high efficiency reflector, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) >=100lumens/watt, 2000 Lumen, Life of fixture (Including Driver) : 30K Hrs. @ L70B50 Lumen maintenance, CCT up to 6500 (SDCM<5), CRI >80, PF >0.95 & THD<10%, an operating Voltage Range of 140 - 270 V.Minimum Internal Surge Protection 2.0KV The fixture design should comply with IS10322, EMC / EMI compliance maintaining driver leakage current as per as per IEC 60598,Minimum system Lumens 1000.	item974	1191	Each
956	956	Supply, Installation, Testing & Commissioning of 1x9 watt LED Mirror light fixture wall mounted (600mm) with electronic high efficiency electronic driver, more than 100 lumens/watt, complete as required.	item975	1559	Nos
957	957	Supply, Installation, Testing & Commissioning of Surface Mounted Linear LED IP65 fitting made of Virgin Polycarbonate housing & Non Yellowing PC Diffuser ,LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) >=100lumens/watt, Life of fixture (Including Driver) : 50K Hrs. @ L70B50 Lumen maintenance, CCT 6500 (SDCM<5), CRI >80 , PF >0.95 & THD<10%, an operating Voltage Range of 140 - 270 V.Minimum Internal Surge Protection 3KV The fixture design should comply with IS10322, EMC / EMI compliance maintaining driver leakage current as per as per IEC 60598,Minimum system Lumens 4000.	item976	78	Nos
958	958	Supply, Installation, Testing & Commissioning of Recess LED 600x600mm fitting made of white CRCA powder quoted finish with fully covered by PMMA Acrylic Lumio Diffuser, LED Used shall be SMD type and fixture should have minimum efficacy at System level >=100lumens/watt, Life of fixture : 50K Hrs. @ L70B50 Lumen maintenance, CCT up to 6500 (SDCM<5), CRI >80 , PF >0.95 & THD<10%, Fixture must be office compliant & have to comply to UGR<19 value for optimim glare.an operating Voltage Range of 140 - 270 V.Minimum Internal Surge Protection 2.5KV The fixture design should comply with IS:10322 & Must be EMC / EMI compliance maintaining driver leakage current as per as per IEC 60598, Minimum system Lumens 3000.	item977	7355	Nos
959	959	Supply, Installation, Testing & Commissioning of Recess LED 600x600mm fitting made of white CRCA powder quoted finish with fully covered by PMMA Acrylic Lumio Diffuser, LED Used shall be SMD type and fixture should have minimum efficacy at System level >=100lumens/watt, Life of fixture : 50K Hrs. @ L70B50 Lumen maintenance, CCT up to 6500 (SDCM<5), CRI >80 , PF >0.95 & THD<10%, Fixture must be office compliant & have to comply to UGR<19 value for optimim glare.an operating Voltage Range of 140 - 270 V.Minimum Internal Surge Protection 2.5KV The fixture design should comply with IS:10322 & Must be EMC / EMI compliance maintaining driver leakage current as per as per IEC 60598, Minimum system Lumens 3600.	item978	4448	Nos
960	960	Supply, Installation, Testing & Commissioning of LED Bulkhead Fixture made of pressure die cast aluminum housing with high efficiency reflector, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) >=100lumens/watt, Life of fixture (Including Driver) : 30K Hrs. @ L70B50 Lumen maintenance, CCT - 6500 (SDCM<5), CRI >70, PF >0.95 , an operating Voltage Range of 140 - 270 V.Minimum Internal Surge Protection 2.0KV The fixture design should comply with IS10322, Minimum system Lumens 700.	item979	790	Nos
961	961	Supply, Installation, Testing & Commissioning of Self contained emergency light units 1x9 watt double sided for wall / ceiling mounting with suspension / mounting kit, lamps, inbuilt standby battery (for 2 hours backup) and battery charger etc. in suitable enclosure.	item980	23	Each
962	962	Supply, installation, Testing & Commissioning of 18-22W Watt, surface Type, 6500K, LED batten light fixture, having minimum system lumen output of 100 Lumen / watt complete as requried.	item981	7415	Nos
963	963	Supply, installation, Testing & Commissioning of 36W Watt, surface Type, 6500K, LED batten light fixture, having minimum system lumen output of 100 Lumen / watt complete as requried.	item982	440	Nos
964	964	Supply, Installation, Testing & Commissioning of 20 watt LED Light surface mounted downlight with high efficiency electronic driver, more than 100 lumens/watt, complete as required.	item983	1244	Nos
965	965	Supply, Installation, Testing & Commissioning of 10-12W Surface mouted LED Downlight as complete as required.	item984	320	Meter
966	966	Supply, Installation, Testing & Commissioning of 1x6 watt LED Light surface mounted downlight with high efficiency electronic driver, more than 100 lumens/watt, complete as required.	item985	2400	Each
967	967	Supply, Installation, Testing & Commissioning of 1x6 watt LED Light recessed mounted downlight with high efficiency electronic driver, more than 100 lumens/watt, complete as required.	item986	2801	Each
968	968	Supply, Installation, Testing & Commissioning of 10-12 watt LED wall bracket Light fitting with more than 100 lumens/watt, complete as required.	item987	819	Each
969	969	Supply, Installation, Testing & Commissioning of LED strip light, Strip should have minimum efficacy at System level >=70lumens/watt with nominal system lumens 300/mtr, Life of strip : 15000 burning Hrs. @ (ta 25 C) @L70B50 Lumen maintenance , CCT of WW, CRI Ra >=80, an operating Voltage Range of 140 - 270 VAC. Minimum Internal Surge Protection 2.0KV & Supply Voltage of 24VDC.The fixture design should comply with CB report, LM79, IP test, thermal test.	item988	434	Each
970	970	Supplying and fixing of 250 mm sweep decorative Fresh air fan with all accessories suitable for operation single phase 230 volt 50 cycle per second per sec. AC supply etc. as required. in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning earthing etc. as required.	item989	443	Nos
971	971	Supply, Installation, Testing & Commissioning of Recessed Mounted LED Downlighter with 2X 26W LED Module individually adjustable (Tilt 30° (2 sides); Pan 360°). Fixture to be made of Metal housing with powder coating, matt finishing, white color RAL9010, . LED Used shall be COB type with Minimum system Lumens 3600, Life of : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 4000K (SDCM<=4), CRI >90 for high quality light output with light Beam angle of 34/40 Deg. power factor >0.9 an operating Voltage Range of 140 - 277 VAC. Minimum Internal Surge Protection 2.0KV & Fixed output (remote SELV driver with 0.3m length cable), Fixture dimensions similar to L: 324~328mm W:114~118mm. The fixture design should comply with EMC / EMI compliance with CB, EMC, CE, AS/NZS, CCC Certifications along with BIS certification for LED Driver & Luminaire, Luminaire manufacture shall provide LM79report from NABL accredited lab & LM80 report issued by LED manufacturer.	item990	45	Nos
972	972	Supply, Installation, Testing & Commissioning of 1x3 watt LED Light recess mounted downlight with high efficiency electronic driver, more than 100 lumens/watt, complete as required.	item991	32	Nos
973	973	Supply, Installation, Testing & Commissioning of 1x26 watt LED Light recess mounted downlight with high efficiency electronic driver, more than 100 lumens/watt, complete as required.	item992	4	Nos
974	974	Supply, Installation, Testing & Commissioning of 70 watt LED Midbay Light with high efficiency electronic driver, more than 100 lumens/watt, complete as required.	item993	390	Nos
975	975	Supplying including fitting and fixing of following star rated A.C. ceiling fan complete with all accessories like down rod, canopy etc of following sweeps with making necessary connection cable as approved by Deptt.s etc as required complete and as directed by the department as required complete etc. (Without regulator). (Orient / PSPO / Usha / Crompton / Havells/ ATC / V Gaurd.) Energy efficient 5-star 1200 mm sweep. (Orient / PSPO / Usha / Crompton / Havells/ ATC / V Gaurd.)	item994	5647	Each
976	976	Supplying including fitting fixing of following A.C. Wall fan in the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. (CROMPTON /ORIENT/Havells/USHA or equivalent make) Air Circulator wall fan 600 mm sweep Turbo force	item995	109	Each
977	977	Supplying including fitting fixing of following A.C. Wall fan in the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. (CROMPTON /ORIENT/Havells/USHA or equivalent make) SDX 120 with metal body metal blade 400 mm sweep	item996	31	Each
978	978	Supply, installation, testing and commissioning of following LAN networks equipments. Solid Copper Cable 6, 4 pair, UTP 305m SCHNEIDER/LEGRAND or equivalent make as approved by the Deptt.	item997	422403	Meter
979	979	Supply, installation, testing and commissioning of following LAN networks equipments. Patch Panel Cat 6 UTP Keystone-24 Port- Loaded SCHNEIDER/LEGRAND or equivalent make as approved by the Deptt.	item998	387	Nos.
980	980	APW Cyber Rack Networking Equipment Rack APW President Enclosure, 600mmW CYBERACK 42U/800mmD (CRCA Steel Frame with Aluminium Profiles & 2 Nos. of Removable Side Panels with followwing items:- Top cover with cable entry-1no.-Bottom cover with cable entry-1no.-19\" Mounting Angles-2 pairs., Finish: Powder coated to 80 microns; Matt Finish. Colour: BLACK with, Load rating capacity -500 Kgs., Front side vented glass door and rear full perforated steel door with locks. \" PDU 10*5/15A-01 Nos., Fan Housing Unit with 4 Fans-01 Set, Mounting Hardware (Set of 20)-1 Set, Castor with Brake- 2Nos., Castor without Brake - 2 Nos., Earthing Kit - 01 Set, Cable Manager 19\" 1U - 2 Nos.	item999	14	Each
981	981	Supply 8 mm round aluminium conductor for horizontal lightning protection - run in roof.	item1000	7490	Mtr.
982	982	Supply of roof conductor holder for 8 mm round aluminium conductor made of Gun Metal for horizontal installation. The distance between each holder should be min of 1.5 mtr.	item1001	1150	Nos.
983	983	Supply of Cross connector for connecting of 8 mm Al round conductor . The connector should be of Gun Metal with SS nuts and bolt.	item1002	376	Nos.
984	984	Supply of T connector for connecting of 8 mm Al round conductor . The connector should be of Gun Metal with SS nuts and bolt.	item1003	182	Nos.
985	985	Supply of L connector for connecting of 8 mm Al round conductor . The connector should be of Gun Metal with SS nuts and bolt.	item1004	171	Nos.
986	986	Supply of straight connector for connecting of 8 mm Al round conductor . The connector should be of Gun Metal with SS nuts and bolt.	item1005	175	Nos.
987	987	Supply of Expansion piece to compensate the expansion of round 8 mm Al conductor when temperature variation . Connection should be in every 20 mtr.	item1006	151	Nos.
988	988	Supply of fixing glue for fixing of roof conductor holder .	item1007	141	Pc
989	989	Supply of Expansion piece connector for connecting of 8 mm Al round conductor . The connector should be of Gun Metal with SS nuts and bolt.	item1008	288	Nos.
990	990	Supply of 8 mm round aluminium conductor as a down conductor mounted in the surface of wall which will carry the lightning current to earth pit.	item1009	2883	Mtr.
991	991	Supply of Down conductor holder for 8 mm round aluminium conductor of min distance between the wall to the conductor will be of 50 mm. The distance between each holder should be min of 1.5 mtr.	item1010	348	Nos.
992	992	Supply of Test Joint Point for 8 mm round aluminium conductor , the size should be of 25 x 3 x 150 mm copper in ABS boxes.	item1011	90	Nos.
993	993	Supply of UL approved low carbon high tensile steel rod with copper coating of min 254 micron JK Chemrode - 317 CBR the dia should be 17.2 mm with length of 10 feet ( 3000 mm) . The rod shall be as per IEC 62561-2 and approved by UL 467. The rod shall be tested from NABL lab for current discharge not less then 46kA peak. The Chemrode shall be surrounded with 50 kg ( 2 bag) of Earth enhance materiel JK Activer+ according to IEC 62561-7 and the Chemical resistance value shall not increase more then 0.064 Om and same will be tested from NABL lab.	item1012	90	Nos.
994	994	Supplying, erection, testing and commissioning of Aviation lights with LED lamp with flasher 170mm suitable for 230V AC complete with fitting including photochromatic switch for automatic ON/OFF of Aviation lights complete.	item1013	7	Nos.
995	995	Supply with installation & commissioning of readymade maintenance free CPRI approved chemical earthing system with 50mm dia. 3.00 Meters length corrosion free dual pipe technology G.I. Chemrode Electrode complete with Reslow grounding Minerals 25 k and Advance Earth pit cover including excavation of earth pit and construction of brick earth chamber including plastering both inner & outer surface of brick wall as specified and directed by the deptt.	item1014	97	Each
996	996	Supply with installation & commissioning of readymade maintenance free CPRI approved chemical earthingsystem with 50mm dia. 3.00 Meters length corrosion free Single pipe technology -Copper Chemrode Electrode complete with Reslow grounding Minerals 25 k and Advance Earth pit cover including excavation of earth pit and construction of brick earth chamber including plastering both inner &outer surface of brick wall as specified and directed by the deptt.	item1015	216	Each
997	997	Supplying &laying of 6 SWG G.I. Earth from earth electrode (below G.L.)to electrical swicth gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.	item1016	505	Meter
998	998	Supplying & laying of 25x6 mm size G.I. strips drawn on surface from earth electrode to electrical switch gears , machineries etc.complete with supply of G.I. nuts & bolts screws etc including reverting, soldering & making necessary connection as approved,specified and directed by the deptt.	item1017	10322	Meter
999	999	Supplying & laying of 50x6 mm size G.I. strips drawn on surface from earth electrode to electrical switch gears , machineries etc.complete with supply of G.I. nuts & bolts screws etc including reverting, soldering & making necessary connection as approved,specified and directed by the deptt.	item1018	1880	Meter
1000	1000	Supply, fitting & fixing 20 mmx3 mm Copper strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of Brass Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt.)with earth electrode copper strips and Lightning Arrestor etc. as specified and directed by the deptt.	item1019	10760	Meter
1001	1001	Supplying &laying of 8 SWG G.I. wire with existing cable on cable tray.	item1021	5463	Meter
1002	1002	Supply, installation, testing & commissioning of 1 Loop Intelligent / Analogue Addressable Fire Alarm Panel Microprocessor based character display Network option built in Alarm, Trouble & supervisory relays LPCB listed. make : Honeywell, Siemens, Bosch, Schrack, Notofier, Notifier, Apollo or equivalent as approved by the Deptt.)	item1022	4	Each
1003	1003	Supply, installation, testing & commissioning of 2 Loop Intelligent / Analogue Addressable Fire Alarm Panel Microprocessor based character display Network option built in Alarm, Trouble & supervisory relays LPCB listed. make : Honeywell, Siemens, Bosch, Schrack, Notofier, Notifier, Apollo or equivalent as approved by the Deptt.)	item1023	4	Each
1004	1004	Supply, installation, testing & commissioning of 5 Loop Intelligent / Analogue Addressable Fire Alarm Panel Microprocessor based character display Network option built in Alarm, Trouble & supervisory relays LPCB listed. make : Honeywell, Siemens, Bosch, Schrack, Notofier, Notifier, Apollo or equivalent as approved by the Deptt.)	item1024	18	Each
1005	1005	Supply, installation, testing & commissioning of intelligent plug in photo electric Smoke Detectors having features like integral communication, dual LED for 360° viewing angle, walk test with address display etc. UL / LPCB approved, make : Honeywell, Siemens, Bosch, Schrack, Notofier, Notifier, Apollo or equivalent as approved by the Deptt.)	item1025	7794	Each
1006	1006	Supply, Installation, Testing & Commissioning of rate of rise & fixed temperature resettable heat detector with mounting base. make : Honeywell, Siemens, Bosch, Schrack, Notofier, Notifier, Apollo or equivalent as approved by the Deptt.)	item1026	114	Each
1007	1007	Supply, installation, testing & commissioning of Monitor Module.UL / LPCB approved, make - Honeywell, Siemens, Bosch, Schrack, Notofier, Notifier, Apollo or equivalent as approved by the Deptt.) with housing box	item1027	303	Each
1008	1008	Supply, installation, testing & commissioning of Control Module.UL / LPCB approved, make - Honeywell, Siemens, Bosch, Schrack, Notofier, Notifier, Apollo or equivalent as approved by the Deptt.) with housing box Model:200e-SMD.	item1028	129	Each
1009	1009	Supply, installation, testing & commissioning of Addressable Hooter / SOUNDER; UL / LPCB approved, make - Honeywell, Siemens, Bosch, Schrack, Notofier, Notifier, Apollo or equivalent as approved by the Deptt.)	item1029	463	Each
1010	1010	Supply, installation, testing & commissioning of Manual pull station with addressable interface, built in LED with key reset facility. UL / LPCB listed. make : Honeywell, Siemens, Bosch, Schrack, Notofier, Notifier, Apollo or equivalent as approved by the Deptt.)	item1030	463	Each
1011	1011	Supply, installation, testing & commissioning of Response Indicator to give visual indication of detection of smoke - RED colour LED for indication. make - Agni Suraksha, or equivalent as approved by the Deptt.)System Sensor.	item1031	4944	Each
1012	1012	Supply, installation, testing & commissioning of Addressable Loop Powered Beam Detectors. 10-100M range. Automatic Drift Compensation. UL / LPCB approved, make : Honeywell, Siemens, Bosch, Schrack, Notofier, Notifier, Apollo or equivalent as approved by the Deptt.)	item1032	4	Each
1013	1013	Supply Installation, Testing & Commissioning of fire fighter main console at control room including power supply and accessories.	item1033	6	Nos.
1014	1014	Supply Installation, Testing & Commissioning of Fire fighters telephone handset.	item1034	26	Nos.
1015	1015	Supply Installation, Testing & Commissioning of Fire fighters telephone jack.	item1035	338	Nos.
1016	1016	Supplying, installation, testing & commissioning of fault isolator complete with base as required.	item1036	478	Nos.
1017	1017	SITC of EN54-16 compliant IP Based Digital Public Address & Voice Alarm system. The selected system devices like controllers and Paging Microphones, should use the TCP/IP technologies and build on the standard network platform to ensure expandability. The individual systems should be able to play 4 simutaneous audio messages and also be able to be networked over IP. SITC of 8 zone IP based, digital Voice Alarm controller expandable upto 128 zones. The voice alarm controller should be able to connect directly over Ethernet. It should have functions like the audio playing, zone control, fault monitoring, log recording, volume control and amplifier switchover. The Voice alarm controller should also have the following functions:\n. 255 Priorities\n. Time schedule broadcasts\n. Its own PTT microphone\n. Capable of amplifier redundancy\n. 8 trigger inputs/outputs	item1037	32	Set
1018	1018	SITC of IP based Networkable touch screen paging station for selection of zones, supervision of system status, setting of scheduled broadcasts with the following functions:\n. Built-in monitoring loudspeaker\n. Detachable goose-neck microphone\n. LCD touchscreen display\n. Audio input\n	item1038	5	Set
1019	1019	SITC of 2x250W Amplifier with 4 independent channels and can provide automatic re-settable overcurrent, overload, overheating, overvoltage, under-voltage and DC protection.	item1039	53	Set
1020	1020	Supplying installation, testing, programming and commissioning of Audio equipment, 4-Channel Power Amplifier, 75 W per channel @ 8 ohms	item1040	4	Set
1021	1021	SITC of 6W Ceiling mount with max SPL1M/1W 96dB . Frequency response of 160Hz-20KHz. The speaker shoud have tappings at 6W/3W\n\n	item1041	3668	Set
1022	1022	SITC of Surface Mount 6W Ceiling / Wall mount with max SPL1M/1W 96dB . Frequency response of 160Hz-20KHz. The speaker shoud have tappings at 6W/3W.	item1042	700	Set
1023	1023	Supply, Installation, Testing & Commissioning of 2C x 1.5 sq.mm Fire Survival armoured cable (300/500V) with Class-2 Copper conductor having Mineral ceramic glass fire barrier tape covered by an extruded layer of Cross-linkable Low Smoke Zero Halogen (LSZH) insulation as per EI-5 Of BS EN 50363 along with ATC drain wire, aluminium tape screening and LSZH outer sheath as per BS 7629-1 & BS-5839-1 (latest edition). Outer sheath should be Anti Rodent/Anti Termite. Should retain circuit integrity as per BS 8434-2 (930 deg C for 120 mins on single sample) including end termination etc as complete as required. (For Fire & PA System)	item1043	360	Meter
1024	1024	Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed ISI marked Steel conduit pipe wiring system. With 2 x 1.5 sq. mm. cable in 20 mm dia. rigid Steel conduit.	item1044	116646	Meter
1025	1025	Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. speaker cable Single pair, 2-core, 1.5 sqmm	item1045	65496	Meter
1026	1026	Supply, installation, testing and commissioning of following LAN networks equipments. Solid Copper Cable 6, 4 pair, UTP SCHNEIDER/LEGRAND or equivalent make as approved by the Deptt.	item1046	33478	Meter
1027	1027	Supply, Installation, Testing & Commissioing of 160 KVA Modular UPS in paralleling mode at 0.99 input power factor with SNMP card, compatible for BMS connectivity on backnet/MODBUS, Isolation transformer as per specification given in the document with following broad features. (Make- Auto Meter Allience / Socomec / Delta / Reillo Power / APC Schneider / Emerson) U PS shall carry design output at 40 deg. Shall have soft start and hold of for incoming supply.Invertor capability to supply 150% load for 5 sec. Three Phase Input and Three Phase Output. (Input - 340V - 470V, Three Phase, 4 wire. / Output - 400-415 Volt, Three Phase, 4 Wire.) Shall not allow deep discharge of the battery and shall not go to 10.5 volts in case of 12 volt cells. Battery shall be external type with rack and suitable for 30 minute backup on 100% load. UPS shall be compatible for 4 nos unit in parallel operation. (Synchronize). Parallel operation kit shall be supplied with UPS. Suitable size & length of Copper Cable between battery to battery and battery to UPS shall be provided without any extra cost. UPS described as above	item1047	8	Each
1028	1028	Supply, installation, testing & commissioing of 40 KVA Modular UPS at 0.99 input power factor with SNMP card, compatible for BMS connectivity on backnet/MODBUS, inbuilt isolation transformer as per specification given in the document with following broad features. (Make- Auto Meter Allience / Socomec / Delta / Reillo Power / APC Schneider / Emerson) UPS shall carry design output at 40 deg. Shall have soft start and hold of for incoming supply. Invertor capability to supply 150% load for 5 sec. Three Phase Input and Three Phase Output. (Input - 340V - 470V, Three Phase, 4 wire. / Output - 400-415 Volt, Three Phase, 4 Wire.) Shall not allow deep discharge of the battery and shall not go to 10.5 volts in case of 12 volt cells. Battery shall be external type with rack and suitable for 30 minute backup on 100% load. Suitable size & length of Copper Cable between battery to battery and battery to UPS shall be provided without any extra cost. UPS shall be compatible for 3 nos unit in parallel operation. (Synchronize). Parallel operation kit shall be supplied with UPS. UPS described as above	item1048	4	Each
1029	1029	Supply, installation, testing & commissioing of 25 KVA Modular UPS at 0.99 input power factor with SNMP card, compatible for BMS connectivity on backnet/MODBUS, inbuilt isolation transformer as per specification given in the document with following broad features. (Make- Auto Meter Allience / Socomec / Delta / Reillo Power / APC Schneider / Emerson) UPS shall carry design output at 40 deg. Shall have soft start and hold of for incoming supply. Invertor capability to supply 150% load for 5 sec. Three Phase Input and Three Phase Output. (Input - 340V - 470V, Three Phase, 4 wire. / Output - 400-415 Volt, Three Phase, 4 Wire.) Shall not allow deep discharge of the battery and shall not go to 10.5 volts in case of 12 volt cells. Battery shall be external type with rack and suitable for 30 minute backup on 100% load. Suitable size & length of Copper Cable between battery to battery and battery to UPS shall be provided without any extra cost. UPS shall be compatible for 2 nos unit in parallel operation. (Synchronize). Parallel operation kit shall be supplied with UPS. UPS described as above	item1049	1	Each
1030	1030	Supply, installation, testing & commissioing of 20 KVA Modular UPS at 0.99 input power factor with SNMP card, compatible for BMS connectivity on backnet/MODBUS, inbuilt isolation transformer as per specification given in the document with following broad features. (Make- Auto Meter Allience / Socomec / Delta / Reillo Power / APC Schneider / Emerson) UPS shall carry design output at 40 deg. Shall have soft start and hold of for incoming supply. Invertor capability to supply 150% load for 5 sec. Three Phase Input and Three Phase Output. (Input - 340V - 470V, Three Phase, 4 wire. / Output - 400-415 Volt, Three Phase, 4 Wire.) Shall not allow deep discharge of the battery and shall not go to 10.5 volts in case of 12 volt cells. Battery shall be external type with rack and suitable for 90 minute backup on 100% load. Suitable size & length of Copper Cable between battery to battery and battery to UPS shall be provided without any extra cost. UPS shall be compatible for 3 nos unit in parallel operation. (Synchronize). Parallel operation kit shall be supplied with UPS. UPS described as above	item1050	6	Each
1031	1031	Supply, installation, testing & commissioing of 15 KVA Modular UPS at 0.99 input power factor with SNMP card, compatible for BMS connectivity on backnet/MODBUS, inbuilt isolation transformer as per specification given in the document with following broad features. (Make- Auto Meter Allience / Socomec / Delta / Reillo Power / APC Schneider / Emerson) UPS shall carry design output at 40 deg. Shall have soft start and hold of for incoming supply. Invertor capability to supply 150% load for 5 sec. Three Phase Input and Three Phase Output. (Input - 340V - 470V, Three Phase, 4 wire. / Output - 200-230 Volt, Single Phase, 2 Wire.) Shall not allow deep discharge of the battery and shall not go to 10.5 volts in case of 12 volt cells. Battery shall be external type with rack and suitable for 90 minute backup on 100% load. Suitable size & length of Copper Cable between battery to battery and battery to UPS shall be provided without any extra cost. UPS shall be compatible for 2 nos/3 nos / 4 nos unit in parallel operation. (Synchronize). Parallel operation kit shall be supplied with UPS. UPS described as above	item1051	9	Each
1032	1032	Supply, installation, testing & commissioing of 3 KVA UPS as per specification given in the document with following broad features. (Make- Auto Meter Allience / Socomec / Delta / Reillo Power / APC Schneider / Emerson) Input power factor shall be more than 0.95. from 25% to 100% load. UPS shall carry design output at 40 deg. Shall have soft start and hold of for incoming supply. Invertor capability to supply 150% load for 5 sec. Single Phase Input and Single Phase Output. (Input - 220V - 260V, Single Phase, 2 wire. / Output - 220 Volt, Single Phase, 2 Wire.) Shall not allow deep discharge of the battery and shall not go to 10.5 volts in case of 12 volt cells. Battery shall be external type with rack and suitable for 90 minute backup on 100% load. UPS described as above	item1052	5	Each
1033	1033	Supply installation , testing & Commissioning of following rating of invertor with battery and trolley as complete as required. Invertor shall be suitable for 90 minute backup on full load as per spercification. 1500 VA, 220 Volt	item1053	3	Each
1034	1034	Supply installation , testing & Commissioning of following rating of invertor with battery and trolley as complete as required. Invertor shall be suitable for 90 minute backup on full load as per spercification. 2000 VA, 220 Volt	item1054	2	Each
1035	1035	Supply installation , testing & Commissioning of following rating of invertor with battery and trolley as complete as required. Invertor shall be suitable for 90 minute backup on full load as per spercification. 3000 VA, 220 Volt	item1055	1	Each
1036	1036	ISOLATION PANEL FOR OT'S (10 KVA) Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of (Pieco make ) isolation panels fabricated out of 14 gauge CRCA sheet steel incubicle compartmentalized wall mounted, dust and vermin proof with reinformcement of suitable size angle iron, channels T sections and / or flats wherever necessary including stainless steel door fitted with stainless screws (Degree of protection IP42). Knockouts shall be provided at the top of the panel. Panels shall be treated with all anticrossive process before painting. (Make- PICO / Schneider / Socomec) Approval shall be taken in form of shop drawings before fabrication. Cadmimum plated hardware and conform to NFPA / UL / IS / IEC code of pratice shall be used with followings : 1 No. 63 amps DP ELCB 30 mA leakage current (primary side of transformer). 1 No. 63 amps DP MCB (Primary side of transformer). Isolation Transformer , Rating : 10 KVA, Ratio : 1:1, Primary voltage : 230 V AC + 10%, Secondary Voltage : 230 V AC + 1%, Cooling : Air Cooled, Winding & Type : Copper winding double wound with shield grounded to isolated ground bus secondary ungrounded, Spike suppression level : Not more than 3 dB, Insulation Class : H, Overloading Capacity : 50% for one hour, Sound level complete Unit with cabinet : Not more than 28 dB., Line Isolation Monitor : Hazard Index 5 mA Conist of leakage current detector control transformer mother board with relay etc. LIM monitor card.(Pieco Make), Indication & Metering Meter with selection indicator including selector switch : 0-10 mA. Following indication for Hazard Index. Leakage Lamp Zone, Current mA Colour , 3-4 Green Safe Zone, 5-10 Red Hazard Zone Alarm, 1 No. orange colour lamp shall be provided for mains ON., Suitable rating MCB’s shall be provided for all indicating lamps. Audio / Visual alarm, test / reset PB’s including all accessories as required. Outgoing MCB : 14 Nos. 20 amps DP MCBs. Note: All ELCB shall be of SI/HI-type. All MCB’s shall be minimum of 10 KA breaking capacity & ‘D’ curve only. Ventilation fans for cooling of isolation transformers shall be provided. Isolation for OT’s described as above.	item1056	17	Each
1037	1037	Supply, Installation, Testing & Commissioning of Controllers- Networkable 2 reader/ 2 door Intelligent controller with enclosure and power supply (Enclosure + Power Supply) .	item1057	33	No.
1038	1038	Supply, installation, testing and commissioning Short Range (up to 9 cm ) Smart Card Reader For Exit of Lift Access Doors , tripod/Flap barrier- Entry & Exit (doors) as per the specification.	item1058	66	No.
1039	1039	Supply, installation, testing and commissioning of contactless Clamshell 2K /2Application Area Smart Card suitable for Access Door as per the specification.	item1059	900	No.
1040	1040	Supply, installation, testing and commissioning Access Control System Server Software consisting of Access Control system , Alarm Document , Alarm management , All these along with high end security features consist in single package as per specification.	item1060	3	No.
1041	1041	Supply, Installation, testing & commissioning of Single Leaf Electro Magnetic Lock of Suitable Capacity(Min 600 lbs) as per specification Double Leaf Door	item1061	57	No.
1042	1042	Supply, Installation, testing & commissioning of Single Leaf Electro Magnetic Lock of Suitable Capacity(Min 600 lbs) as per specification . Single Door Leaf	item1062	9	No.
1043	1043	Supply and Laying of of 8 Core x 0.2 sq mm multi strand, copper, unarmored shielded Cable as per specification (between the every card readers & the access controllers)	item1063	3300	Meter
1044	1044	Power Supply- Supply, Installation , testing and commissioning of 12 V SMPS DC Power Supply Unit, highly regulated and spikes free terminal voltage and heavy sourcing current for regulated terminal voltage.	item1064	17	No.
1045	1045	Magnetic Contact- Supply, Installation, Testing and commissioning of Magnetic Contact.	item1065	66	No.
1046	1046	Supply , Installation , Testing and commissioning of Single Front Facia Plate consisting of Soft Touch Push Buttons Emergency Exit Door Release and indicator LED to show the door status	item1066	66	No.
1047	1047	Supply, Installation, Testing & Commissioning of Switch Layer 2/3 managed switch with 24 ports (RJ-45) port. The switch shall have 2 RSTP enabled ports to communicate with other switches to built a ring topology network on CAT6 cable. The switch shall have 1 Giga-byte port to communicate with other switches including Passive components inbuilt 2 SFP ports including SFP modules, rack mountable, SMPS power supply & other termination accessories (Like Pigtails/LIUs/ Convertors/Splicing equipment, Patch panel, Patch Cord, Etc)	item1067	99	No.
1048	1048	Supply, Installation, Testing & Commissioning of IP based Nurse Station Terminal: 'Nurse Station shall comprises of minimum 7“ large touch screen colour graphic display for displaying all details, Electronic circuit board with controller and FlashProm, 100BaseTX interface to the system switch, 3m connection cable. The ward terminal shall display date and time, indication of all presence, indication of all calls including the exact location.	item1068	78	No.
1049	1049	Supply, Installation, Testing & Commissioning of IP based Patient Bedhead Terminal - Without Speech consisting of a plastic case in antimicrobial finish having\n- having Call button with nurse symbol with integrated led light on the top of button.\n- 3 lighting keys for other functions like code blue, emergency and house-keeping.	item1069	424	No.
1050	1050	Supply, Installation, Testing & Commissioning of Lamp Module For optical indication of calls, presences and reminders in the 3 relevant colours consisting of:\n- Single light chamber with light reflectors for homogeneous illumination.	item1070	276	No.
1051	1051	Central Monitoring & Even Database Software with Server & LAN switches, Even Database Software, Supply, Installation, Testing & Commissioning of Software- Event Database Software Software pack installed on the system server for automatically logging all events in the entire communications system, such as, e.g., calls, presence markings, call acknowledgements, reminders.	item1071	2	No.
1052	1052	Server for Nurse Call System, Supply, Installation, Testing & Commissioning of Management center - Nurse Call Server Management Centre Server for Nurse Call System for uploading the firmware and the system configuration, for operating interfaces to foreign systems, for logging of all system events and as a central location for system configuration and remote maintenance\n- Intel i5 3GHz or higher\n- 8 GB RAM, 1TB HDD\n- 2 x Gbit LAN Ethernet RJ45\n- 1 x serial connection RS232 and 2 x USB	item1072	2	No.
1053	1053	Supply, Installation, Testing & Commissioning of Pull Cord with cancel Button / call cancell button shall consist of:\n- 1 call button (pull cord) including integrated LED,\n- 1 presence button (green) incl. control LED,\n- micro switch with a 2 metre pull cord and a luminous grip with a nurse call symbol,\n- Moisture Protected.	item1073	1560	No.
1054	1054	BED LIFT - TEACHING HOSPITAL BLOCK, Supplying, Installation, Testing & Commissioning of 26 Passenger (1768 Kg) Lifts (Gearless), MR/MRL having contract speed of 1.0 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:- Speed --> 1.0 MPS, Floors --> B+G+7, Travel --> 39.0 Mtrs Approx., Stops & door opening - --> 9/1200 mm WideX 2100mm High, Controller: A.C. variable voltage & variable frequency drive. Automatic rescue device complete with dry maintenance free batteries as required. Operation: Microprocessor based single automatic push button / Quadrant / Triplex / Duplex / Simplex selective collective with / without attendant. The group of Lift shall be as per Arch Drwg. Power-415 V, 3 phase, 50 Hz, 4 wires system, Type of doors, (i) Car Power operated, Two Speed Stainless Steel in Scratch resistant finish. (SS 304 Grade), (ii) Landing doors : Stainless Steel in Scratch resistant finish. (SS 304 Grade), Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car. The Lift shall be provided with Brail System. Ceiling as per manufacturer's standards with Fan & LED Lights. On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided. Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. IP based CCTV interfaced to be provided. BMS interface for lift position & 3 way Intercom system. 2 Hour Fire rated door. Manufacturer shall be submit the certificate alongwith supply of material from NABL approved Lab. Lift described as above.	item1074	10	Set
1055	1055	BED LIFT - TEACHING HOSPITAL BLOCK, Supplying, Installation, Testing & Commissioning of 20 Passenger (1360 Kg) Lifts (Gearless), MR/MRL having contract speed of 1.0 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:-Speed --> 1.0 MPS, Floors , Travel , Stops & door opening - --> 6/1200 mm WideX 2100mm High --> 26.0 Mtrs Approx. --> B+G+4, Controller: A.C. variable voltage & variable frequency drive. Automatic rescue device complete with dry maintenance free batteries as required. Operation: Microprocessor based single automatic push button / Quadrant / Triplex / Duplex / Simplex selective collective with / without attendant. The group of Lift shall be as per Arch Drwg. Power-415 V, 3 phase, 50 Hz, 4 wires system, Type of doors, (i) Car Power operated, Two Speed Stainless Steel in Scratch resistant finish. (SS 304 Grade), (ii) Landing doors : Stainless Steel in Scratch resistant finish. (SS 304 Grade), Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car. The Lift shall be provided with Brail System. Ceiling as per manufacturer's standards with Fan & LED Lights. On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided. Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. IP based CCTV interfaced to be provided. BMS interface for lift position & 3 way Intercom system. 2 Hour Fire rated door. Manufacturer shall be submit the certificate alongwith supply of material from NABL approved Lab. Lift described as above.	item1075	2	Set
1056	1056	SERVICE LIFT - TEACHING HOSPITAL BLOCK, Supplying, Installation, Testing & Commissioning of 16 Passenger (1088 Kg) Lifts (Gearless), MR/MRL having contract speed of 1.0 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:- Speed --> 1.0 MPS, Floors , Travel --> 26.0 Mtrs Approx. --> B+G+4, Stops & door opening - --> 6/1200 mm WideX 2100mm High, Controller: A.C. variable voltage & variable frequency drive. Automatic rescue device complete with dry maintenance free batteries as required. Operation: Microprocessor based single automatic push button / Quadrant / Triplex / Duplex / Simplex selective collective with / without attendant. The group of Lift shall be as per Arch Drwg. Power-415 V, 3 phase, 50 Hz, 4 wires system, Type of doors, (i) Car Power operated, Two Speed Stainless Steel in Scratch resistant finish. (SS 304 Grade), (ii) Landing doors : Stainless Steel in Scratch resistant finish. (SS 304 Grade), Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car. The Lift shall be provided with Brail System. Ceiling as per manufacturer's standards with Fan & LED Lights. On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided. Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. IP based CCTV interfaced to be provided. BMS interface for lift position & 3 way Intercom system. 2 Hour Fire rated door. Manufacturer shall be submit the certificate alongwith supply of material from NABL approved Lab. Lift described as above.	item1076	2	Set
1057	1057	FIRE LIFT - TEACHING HOSPITAL BLOCK, Supplying, Installation, Testing & Commissioning of 20 Passenger (1360 Kg) Lifts (Gearless), MR/MRL having contract speed of 1.0 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:- Speed --> 1.0 MPS, Floors , Travel --> 39.0 Mtrs Approx. --> B+G+7, Stops & door opening - --> 9/1200 mm WideX 2100mm High, Controller: A.C. variable voltage & variable frequency drive. Automatic rescue device complete with dry maintenance free batteries as required. Operation: Microprocessor based single automatic push button / Quadrant / Triplex / Duplex / Simplex selective collective with / without attendant. The group of Lift shall be as per Arch Drwg. Power-415 V, 3 phase, 50 Hz, 4 wires system, Type of doors, (i) Car Power operated, Two Speed Stainless Steel in Scratch resistant finish. (SS 304 Grade), (ii) Landing doors : Stainless Steel in Scratch resistant finish. (SS 304 Grade), Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car. The Lift shall be provided with Brail System. Ceiling as per manufacturer's standards with Fan & LED Lights. On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided. Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. IP based CCTV interfaced to be provided. BMS interface for lift position & 3 way Intercom system. 2 Hour Fire rated door. Manufacturer shall be submit the certificate alongwith supply of material from NABL approved Lab. Lift described as above.	item1077	3	Set
1058	1058	BMW LIFT - TEACHING HOSPITAL BLOCK, Supplying, Installation, Testing & Commissioning of 2500 KG Freight lifts (Gearless), MR/MRL having contract speed of 1.0 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:- Speed --> 1.0 MPS, Floors --> B+G+7 , Travel --> 39.0 Mtrs Approx. Stops & door opening - --> 9/1200 mm WideX 2100mm High, Controller: A.C. variable voltage & variable frequency drive. Automatic rescue device complete with dry maintenance free batteries as required. Operation: Microprocessor based single automatic push button / Quadrant / Triplex / Duplex / Simplex selective collective with / without attendant. The group of Lift shall be as per Arch Drwg. Power-415 V, 3 phase, 50 Hz, 4 wires system, Type of doors, (i) Car Power operated, Two Speed Stainless Steel in Scratch resistant finish. (SS 304 Grade), (ii) Landing doors : Stainless Steel in Scratch resistant finish. (SS 304 Grade), Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car. The Lift shall be provided with Brail System. Ceiling as per manufacturer's standards with Fan & LED Lights. On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided. Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. IP based CCTV interfaced to be provided. BMS interface for lift position & 3 way Intercom system. 2 Hour Fire rated door. Manufacturer shall be submit the certificate alongwith supply of material from NABL approved Lab. Lift described as above.	item1078	1	Set
1059	1059	DUM WEIGHTER - TEACHING HOSPITAL BLOCK, Design, manufacturing, testing at works, supply and delivery, receiving, unloading, storing, inspection, handling, assembling, installing in correct assigned position, effecting proper connections, testing and commissioning of following capacity Dum weighter, having speed of 0.5 MPS 4 stops and 4 openings and total travel of 17.2 meters approx. with VVVF drive, full collective Simplex / Duplex control on 415 V, 50 cycles, 3 phase power complete in accordance with specifications and drawings as required with Car, Car Door & Hoistway Door in SS Hairline, inclusive of built in ARD and as per specification., 250 Kg	item1079	4	Set
1060	1060	FIRE LIFT - ACADEMIC BLOCK, Supplying, Installation, Testing & Commissioning of 16 Passenger (1088 Kg) Lifts (Gearless), MR/MRL having contract speed of 1.0 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:- Speed --> 1.0 MPS, Floors --> G+6, Travel --> 30.0 Mtrs Approx. Stops & door opening - --> 7/1000 mm WideX 2100mm High. Controller: A.C. variable voltage & variable frequency drive. Automatic rescue device complete with dry maintenance free batteries as required. Operation: Microprocessor based single automatic push button / Quadrant / Triplex / Duplex / Simplex selective collective with / without attendant. The group of Lift shall be as per Arch Drwg. Power-415 V, 3 phase, 50 Hz, 4 wires system, Type of doors, (i) Car Power operated, Two Speed Stainless Steel in Scratch resistant finish. (SS 304 Grade), (ii) Landing doors : Stainless Steel in Scratch resistant finish. (SS 304 Grade), Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car. The Lift shall be provided with Brail System. Ceiling as per manufacturer's standards with Fan & LED Lights. On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided. Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. IP based CCTV interfaced to be provided. BMS interface for lift position & 3 way Intercom system. 2 Hour Fire rated door. Manufacturer shall be submit the certificate alongwith supply of material from NABL approved Lab. Lift described as above.	item1080	1	Set
1061	1061	13 PASSENGER LIFT - ACADEMIC BLOCK, Supplying, Installation, Testing & Commissioning of 13 Passenger (884 Kg) Lifts (Gearless), MR/MRL having contract speed of 1.0 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:- Speed --> 1.0 MPS, Floors --> G+6, Travel --> 30.0 Mtrs Approx. Stops & door opening - --> 7/900 mm WideX 2100mm High. Controller: A.C. variable voltage & variable frequency drive. Automatic rescue device complete with dry maintenance free batteries as required. Operation: Microprocessor based single automatic push button / Quadrant / Triplex / Duplex / Simplex selective collective with / without attendant. The group of Lift shall be as per Arch Drwg. Power-415 V, 3 phase, 50 Hz, 4 wires system, Type of doors, (i) Car Power operated, Two Speed Stainless Steel in Scratch resistant finish. (SS 304 Grade), (ii) Landing doors : Stainless Steel in Scratch resistant finish. (SS 304 Grade), Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car. The Lift shall be provided with Brail System. Ceiling as per manufacturer's standards with Fan & LED Lights. On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided. Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. IP based CCTV interfaced to be provided. BMS interface for lift position & 3 way Intercom system. 2 Hour Fire rated door. Manufacturer shall be submit the certificate alongwith supply of material from NABL approved Lab. Lift described as above.	item1081	5	Set
1062	1062	20 PASSENGER LIFT - ACADEMIC BLOCK , Supplying, Installation, Testing & Commissioning of 20 Passenger (1360 Kg) Lifts (Gearless), MR/MRL having contract speed of 1.0 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:- Speed --> 1.0 MPS, Floors --> G+6, Travel --> 30.0 Mtrs Approx., Stops & door opening - --> 7/1200 mm WideX 2100mm High. Controller: A.C. variable voltage & variable frequency drive. Automatic rescue device complete with dry maintenance free batteries as required. Operation: Microprocessor based single automatic push button / Quadrant / Triplex / Duplex / Simplex selective collective with / without attendant. The group of Lift shall be as per Arch Drwg. Power-415 V, 3 phase, 50 Hz, 4 wires system, Type of doors, (i) Car Power operated, Two Speed Stainless Steel in Scratch resistant finish. (SS 304 Grade), (ii) Landing doors : Stainless Steel in Scratch resistant finish. (SS 304 Grade), Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car. The Lift shall be provided with Brail System. Ceiling as per manufacturer's standards with Fan & LED Lights. On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided. Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. IP based CCTV interfaced to be provided. BMS interface for lift position & 3 way Intercom system. 2 Hour Fire rated door. Manufacturer shall be submit the certificate alongwith supply of material from NABL approved Lab. Lift described as above.	item1082	1	Set
1063	1063	16 PASSENGER LIFT - JUNIOR RESIDENCE, Supplying, Installation, Testing & Commissioning of 16 Passenger (1088 Kg) Lifts (Gearless), MR/MRL having contract speed of 1.0 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:- Speed --> 1.0 MPS, Floors --> G+6, Travel --> 23.0 Mtrs Approx. Stops & door opening - --> 7/1000 mm WideX 2100mm High. Controller: A.C. variable voltage & variable frequency drive. Automatic rescue device complete with dry maintenance free batteries as required. Operation: Microprocessor based single automatic push button / Quadrant / Triplex / Duplex / Simplex selective collective with / without attendant. The group of Lift shall be as per Arch Drwg. Power-415 V, 3 phase, 50 Hz, 4 wires system, Type of doors, (i) Car Power operated, Two Speed Stainless Steel in Scratch resistant finish. (SS 304 Grade), (ii) Landing doors : Stainless Steel in Scratch resistant finish. (SS 304 Grade), Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car. The Lift shall be provided with Brail System. Ceiling as per manufacturer's standards with Fan & LED Lights. On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided. Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. IP based CCTV interfaced to be provided. BMS interface for lift position & 3 way Intercom system. 2 Hour Fire rated door. Manufacturer shall be submit the certificate alongwith supply of material from NABL approved Lab. Lift described as above.	item1083	2	Set
1064	1064	16 PASSENGER LIFT - SENIOR RESIDENCE, Supplying, Installation, Testing & Commissioning of 16 Passenger (1088 Kg) Lifts (Gearless), MR/MRL having contract speed of 1.0 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:- Speed --> 1.0 MPS, Floors --> G+3, Travel --> 13.20 Mtrs Approx. Stops & door opening - --> 4/1000 mm WideX 2100mm High. Controller: A.C. variable voltage & variable frequency drive. Automatic rescue device complete with dry maintenance free batteries as required. Operation: Microprocessor based single automatic push button / Quadrant / Triplex / Duplex / Simplex selective collective with / without attendant. The group of Lift shall be as per Arch Drwg. Power-415 V, 3 phase, 50 Hz, 4 wires system, Type of doors, (i) Car Power operated, Two Speed Stainless Steel in Scratch resistant finish. (SS 304 Grade), (ii) Landing doors : Stainless Steel in Scratch resistant finish. (SS 304 Grade), Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car. The Lift shall be provided with Brail System. Ceiling as per manufacturer's standards with Fan & LED Lights. On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided. Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. IP based CCTV interfaced to be provided. BMS interface for lift position & 3 way Intercom system. 2 Hour Fire rated door. Manufacturer shall be submit the certificate alongwith supply of material from NABL approved Lab. Lift described as above.	item1084	2	Set
1065	1065	16 PASSENGER LIFT - MALE INTERN, Supplying, Installation, Testing & Commissioning of 16 Passenger (1088 Kg) Lifts (Gearless), MR/MRL having contract speed of 1.0 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:- Speed --> 1.0 MPS, Floors --> G+6, Travel --> 21.0 Mtrs Approx. Stops & door opening - --> 7/900 mm WideX 2100mm High. Controller: A.C. variable voltage & variable frequency drive. Automatic rescue device complete with dry maintenance free batteries as required. Operation: Microprocessor based single automatic push button / Quadrant / Triplex / Duplex / Simplex selective collective with / without attendant. The group of Lift shall be as per Arch Drwg. Power-415 V, 3 phase, 50 Hz, 4 wires system, Type of doors, (i) Car Power operated, Two Speed Stainless Steel in Scratch resistant finish. (SS 304 Grade), (ii) Landing doors : Stainless Steel in Scratch resistant finish. (SS 304 Grade), Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car. The Lift shall be provided with Brail System. Ceiling as per manufacturer's standards with Fan & LED Lights. On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided. Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. IP based CCTV interfaced to be provided. BMS interface for lift position & 3 way Intercom system. 2 Hour Fire rated door. Manufacturer shall be submit the certificate alongwith supply of material from NABL approved Lab. Lift described as above.	item1085	1	Set
1066	1066	16 PASSENGER LIFT - FEMALE INTERN, Supplying, Installation, Testing & Commissioning of 16 Passenger (1088 Kg) Lifts (Gearless), MR/MRL having contract speed of 1.0 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:- Speed --> 1.0 MPS, Floors --> G+6, Travel --> 21.0 Mtrs Approx. Stops & door opening - --> 7/900 mm WideX 2100mm High. Controller: A.C. variable voltage & variable frequency drive. Automatic rescue device complete with dry maintenance free batteries as required. Operation: Microprocessor based single automatic push button / Quadrant / Triplex / Duplex / Simplex selective collective with / without attendant. The group of Lift shall be as per Arch Drwg. Power-415 V, 3 phase, 50 Hz, 4 wires system, Type of doors, (i) Car Power operated, Two Speed Stainless Steel in Scratch resistant finish. (SS 304 Grade), (ii) Landing doors : Stainless Steel in Scratch resistant finish. (SS 304 Grade), Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car. The Lift shall be provided with Brail System. Ceiling as per manufacturer's standards with Fan & LED Lights. On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided. Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. IP based CCTV interfaced to be provided. BMS interface for lift position & 3 way Intercom system. 2 Hour Fire rated door. Manufacturer shall be submit the certificate alongwith supply of material from NABL approved Lab. Lift described as above.	item1086	2	Set
1067	1067	15 PASSENGER STREATCHER LIFT - UG GIRLS HOSTEL , Supplying, Installation, Testing & Commissioning of 15 Passenger (1020 Kg) Lifts (Gearless), MR/MRL having contract speed of 1.0 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:- Speed --> 1.0 MPS, Floors --> G+3, Travel --> 13.20 Mtrs Approx. Stops & door opening - --> 4/800 mm WideX 2100mm High. Controller: A.C. variable voltage & variable frequency drive. Automatic rescue device complete with dry maintenance free batteries as required. Operation: Microprocessor based single automatic push button / Quadrant / Triplex / Duplex / Simplex selective collective with / without attendant. The group of Lift shall be as per Arch Drwg. Power-415 V, 3 phase, 50 Hz, 4 wires system, Type of doors, (i) Car Power operated, Two Speed Stainless Steel in Scratch resistant finish. (SS 304 Grade), (ii) Landing doors : Stainless Steel in Scratch resistant finish. (SS 304 Grade), Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car. The Lift shall be provided with Brail System. Ceiling as per manufacturer's standards with Fan & LED Lights. On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided. Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. IP based CCTV interfaced to be provided. BMS interface for lift position & 3 way Intercom system. 2 Hour Fire rated door. Manufacturer shall be submit the certificate alongwith supply of material from NABL approved Lab. Lift described as above.	item1087	2	Set
1068	1068	16 PASSENGER LIFT - TYPE-II & TYPE-III RESIDENCE, Supplying, Installation, Testing & Commissioning of 16 Passenger (1088 Kg) Lifts (Gearless), MR/MRL having contract speed of 1.5 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:- Speed --> 1.5 MPS, Floors --> G+17, Travel --> 55.80 Mtrs Approx. Stops & door opening - --> 18/1000 mm WideX 2100mm High. Controller: A.C. variable voltage & variable frequency drive. Automatic rescue device complete with dry maintenance free batteries as required. Operation: Microprocessor based single automatic push button / Quadrant / Triplex / Duplex / Simplex selective collective with / without attendant. The group of Lift shall be as per Arch Drwg. Power-415 V, 3 phase, 50 Hz, 4 wires system, Type of doors, (i) Car Power operated, Two Speed Stainless Steel in Scratch resistant finish. (SS 304 Grade), (ii) Landing doors : Stainless Steel in Scratch resistant finish. (SS 304 Grade), Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car. The Lift shall be provided with Brail System. Ceiling as per manufacturer's standards with Fan & LED Lights. On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided. Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. IP based CCTV interfaced to be provided. BMS interface for lift position & 3 way Intercom system. 2 Hour Fire rated door. Manufacturer shall be submit the certificate alongwith supply of material from NABL approved Lab. Lift described as above.	item1088	1	Set
1069	1069	26 PASSENGER LIFT - TYPE-II & TYPE-III RESIDENCE, Supplying, Installation, Testing & Commissioning of 26 Passenger (1768 Kg) Lifts (Gearless), MR/MRL having contract speed of 1.5 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:- Speed --> 1.5 MPS, Floors --> G+17. Travel --> 55.80 Mtrs Approx. Stops & door opening - --> 18/1200 mm WideX 2100mm High. Controller: A.C. variable voltage & variable frequency drive. Automatic rescue device complete with dry maintenance free batteries as required. Operation: Microprocessor based single automatic push button / Quadrant / Triplex / Duplex / Simplex selective collective with / without attendant. The group of Lift shall be as per Arch Drwg. Power-415 V, 3 phase, 50 Hz, 4 wires system, Type of doors, (i) Car Power operated, Two Speed Stainless Steel in Scratch resistant finish. (SS 304 Grade), (ii) Landing doors : Stainless Steel in Scratch resistant finish. (SS 304 Grade), Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car. The Lift shall be provided with Brail System. Ceiling as per manufacturer's standards with Fan & LED Lights. On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided. Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. IP based CCTV interfaced to be provided. BMS interface for lift position & 3 way Intercom system. 2 Hour Fire rated door. Manufacturer shall be submit the certificate alongwith supply of material from NABL approved Lab. Lift described as above.	item1089	1	Set
1070	1070	16 PASSENGER LIFT - TYPE-IV & V RESIDENCE, Supplying, Installation, Testing & Commissioning of 16 Passenger (1088 Kg) Lifts (Gearless), MR/MRL having contract speed of 1.5 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:- Speed --> 1.5 MPS, Floors --> G+10, Travel --> 34.0 Mtrs Approx. Stops & door opening - --> 11/1000 mm WideX 2100mm High. Controller: A.C. variable voltage & variable frequency drive. Automatic rescue device complete with dry maintenance free batteries as required. Operation: Microprocessor based single automatic push button / Quadrant / Triplex / Duplex / Simplex selective collective with / without attendant. The group of Lift shall be as per Arch Drwg. Power-415 V, 3 phase, 50 Hz, 4 wires system, Type of doors, (i) Car Power operated, Two Speed Stainless Steel in Scratch resistant finish. (SS 304 Grade), (ii) Landing doors : Stainless Steel in Scratch resistant finish. (SS 304 Grade), Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car. The Lift shall be provided with Brail System. Ceiling as per manufacturer's standards with Fan & LED Lights. On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided. Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. IP based CCTV interfaced to be provided. BMS interface for lift position & 3 way Intercom system. 2 Hour Fire rated door. Manufacturer shall be submit the certificate alongwith supply of material from NABL approved Lab. Lift described as above.	item1090	1	Set
1071	1071	STREATCHER LIFT - TYPE-IV & V RESIDENCE, Supplying, Installation, Testing & Commissioning of 20 Passenger (1360 Kg) Lifts (Gearless), MR/MRL having contract speed of 1.5 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:- Speed --> 1.5 MPS, Floors --> G+10, Travel --> 34.0 Mtrs Approx. Stops & door opening - --> 11/1000 mm WideX 2100mm High. Controller: A.C. variable voltage & variable frequency drive. Automatic rescue device complete with dry maintenance free batteries as required. Operation: Microprocessor based single automatic push button / Quadrant / Triplex / Duplex / Simplex selective collective with / without attendant. The group of Lift shall be as per Arch Drwg. Power-415 V, 3 phase, 50 Hz, 4 wires system, Type of doors, (i) Car Power operated, Two Speed Stainless Steel in Scratch resistant finish. (SS 304 Grade), (ii) Landing doors : Stainless Steel in Scratch resistant finish. (SS 304 Grade), Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car. The Lift shall be provided with Brail System. Ceiling as per manufacturer's standards with Fan & LED Lights. On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided. Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. IP based CCTV interfaced to be provided. BMS interface for lift position & 3 way Intercom system. 2 Hour Fire rated door. Manufacturer shall be submit the certificate alongwith supply of material from NABL approved Lab. Lift described as above.	item1091	1	Set
1072	1072	BED LIFT - TEACHING HOSPITAL BLOCK, Supplying, Installation, Testing & Commissioning of 26 Passenger (1768 Kg) Lifts (Gearless), MR/MRL having contract speed of 1.0 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:- Speed --> 1.0 MPS, Floors --> 2B+G+7, Travel --> 43.0 Mtrs Approx. Stops & door opening --> 10/1200 mm WideX 2100mm High. Controller: A.C. variable voltage & variable frequency drive. Automatic rescue device complete with dry maintenance free batteries as required. Operation: Microprocessor based single automatic push button / Quadrant / Triplex / Duplex / Simplex selective collective with / without attendant. The group of Lift shall be as per Arch Drwg. Power-415 V, 3 phase, 50 Hz, 4 wires system, Type of doors, (i) Car Power operated, Two Speed Stainless Steel in Scratch resistant finish. (SS 304 Grade), (ii) Landing doors : Stainless Steel in Scratch resistant finish. (SS 304 Grade), Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car. The Lift shall be provided with Brail System. Ceiling as per manufacturer's standards with Fan & LED Lights. On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided. Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. IP based CCTV interfaced to be provided. BMS interface for lift position & 3 way Intercom system. 2 Hour Fire rated door. Manufacturer shall be submit the certificate alongwith supply of material from NABL approved Lab. Lift described as above.	item1092	18	Set
1073	1073	HVAC WORK\nAHRI Certified Rotary Screw Water Cooled Chilling Machine With Air Cooled VFD & Microprocessor Based Control Panel (Capacity - 300 TR)\nSupply, installation, testing and commissioning of Rotary Screw Water cooled water Chilling M/C of 300 TR actual capacity at below mentioned operating conditions with R - 134 A refrigerant, open / semihermatic / hermatically sealed compressor, driven by suitable KW Sq. Cage induction motor complete with variable speed drive complete with watercooled shell & tube condenser, insulated shell and tube flooded chiller, flow switches at condenser & chiller outlet, refrigerant piping, Refrigerant and Oil (First Charge), Microprocessor based control panel, chiller / floor mounted aircooled VSD with IP 54 enclosure, active harmonic filters & accessories etc. all mounted on M.S. frame. Motor shall be suitable for 415 volts ± 10%, 50Hz ± 5 %, three phase A.C. supply. The chilling m/c as described above shall be in line with specifications & shall have interface card compatible with BMS system. Actual capacity of chillers shall be based the parameters given below & power consumption / TR at 100%, 75%, 50% & 25% load shall be based on ARI Condition.\nCondenser CDW IN - 29.44º C.\nCDW OUT - 33.61º C.\nFLOW - 4536 LPM\nFouling Factor (MKS) - 0.0002\nPressure Drop Max - 6.5 Meter\nChiller CHW IN - 12.22º C.\nCHW OUT - 6.67º C.\nFLOW - 2721 LPM\nFouling Factor (MKS) - 0.0001\nPressure Drop Max - 6.5 Meter\nCOP At AHRI Condition - 5.8 (Min)\nCapacity of Chiller at above\nOperating condition - 300 TR\nPower Consumption Of Chiller\n/ TR At Tender Condition\nMentioned Above (Max) - 0.68\nThe price quoted for supply, installation, testing & commissioning of Screw Water Chilling Unit shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. as required in Indian Rupees. (2W+1Future) in TB Hospital Campus & (2W+1S) in MMCH Hospital Campus	item1093	5	NO
1074	1074	Condenser Water Pumps Set\nSupply, installation, testing and commissioning of Vertical Inline split coupled condenser water centrifugal pump sets with bronze impeller for condenser water recirculation complete with TEFC (IE3) Sq. Cage induction motor with class \"F\" insulation, coupling guard, SS Shaft Grade 416, bronze impeller, factory fitted mechanical seal, flexible pipe connector at inlet and outlet etc. conforming to technical specification & as per following parameters.\nCondenser Water Pumps Set (2W+1S)\nCapacity of Each Pump LPM 4536\nPump Head (Mt) 27.5\nMotor HP (Indicative Only) 40.0\nPump Efficiency (Min) 80%	item1094	6	NO
1075	1075	Primary Chilled Water Pumps Set\nSupply, installation, testing and commissioning of Vertical Inline split coupled chilled water centrifugal pump sets with bronze impeller for chilled water recirculation complete with TEFC (IE3) Sq. Cage induction motor with class \"F\" insulation, coupling guard, SS Shaft Grade 416, bronze impeller, factory fitted mechanical seal, flexible pipe connector at inlet and outlet etc. conforming to technical specification & as per following parameters. The chilled water pumps shall also include the cost of thermal insulation.\nPrimary Chilled Water Pumps Set (2W+1S)\nCapacity of Each Pump LPM 2721\nPump Head (Mt) 14.00\nMotor HP (Indicative Only) 12.5\nPump Efficiency (Min) 75%	item1095	6	NO
1076	1076	Secondary Chilled Water Pumps Set\nSupply, installation, testing and commissioning of Vertical Inline split coupled chilled water centrifugal pump sets with bronze impeller for chilled water recirculation complete with TEFC (IE3) Sq. Cage induction motor with class \"F\" insulation, couplingguard, SS Shaft Grade 416, bronze impeller, factory fitted mechanical seal, flexible pipe connector at inlet and outlet etc. conforming to technical specification & as per following parameters. The chilled water pumps shall also include the cost of thermal insulation. Secondary chilled water pumps shall be suitable for operation on variable frequency drives & conforming to the specifications of variable speed pumping system.\nFor TB Hospital Building (2 x 200 TR @ 2.4 GPM/TR)\nSecondary Chilled Water Pumps Set (2W+1S)\nCapacity of Each Pump LPM 1814\nPump Head (Mt) 22\nPump Motor HP (Indicative Only) 15\nPump Efficiency (Min) 80%	item1096	3	NO
1077	1077	Secondary Chilled Water Pumps Set\nSupply, installation, testing and commissioning of Vertical Inline split coupled chilled water centrifugal pump sets with bronze impeller for chilled water recirculation complete with TEFC (IE3) Sq. Cage induction motor with class \"F\" insulation, couplingguard, SS Shaft Grade 416, bronze impeller, factory fitted mechanical seal, flexible pipe connector at inlet and outlet etc. conforming to technical specification & as per following parameters. The chilled water pumps shall also include the cost of thermal insulation. Secondary chilled water pumps shall be suitable for operation on variable frequency drives & conforming to the specifications of variable speed pumping system.\nFor MMCH Hospital Building (2 x 300 TR @ 2.4 GPM/TR)\nSecondary Chilled Water Pumps Set (2W+1S)\nCapacity of Each Pump LPM 2721\nPump Head (Mt) 22\nPump Motor HP (Indicative Only) 20\nPump Efficiency (Min) 80%	item1097	3	NO
1078	1078	Secondary Chilled Water Pumps Set\nSupply, installation, testing and commissioning of Vertical Inline split coupled chilled water centrifugal pump sets with bronze impeller for chilled water recirculation complete with TEFC (IE3) Sq. Cage induction motor with class \"F\" insulation, couplingguard, SS Shaft Grade 416, bronze impeller, factory fitted mechanical seal, flexible pipe connector at inlet and outlet etc. conforming to technical specification & as per following parameters. The chilled water pumps shall also include the cost of thermal insulation. Secondary chilled water pumps shall be suitable for operation on variable frequency drives & conforming to the specifications of variable speed pumping system.\nFor Medical College Building (1 x 200 TR @ 2.4 GPM/TR)\nSecondary Chilled Water Pumps Set (2W+1S)\nCapacity of Each Pump LPM 1814\nPump Head (Mt) 22\nPump Motor HP (Indicative Only) 15\nPump Efficiency (Min) 80%\n	item1098	4	NO
1079	1079	Variable Speed Pumping System for Secondary Chilled Water Pumps\nFor TB Hospital Building\nSupply, installation, testing and commissioning of Variable Speed Pumping system consisting of three numbers 15 HP variable frequency drive (VFD) having IP-54/55 enclosure with heat sink suitably interfaced with other system components, hand / auto macro designed for pumping application, 01 no. dedicated microprocessor based pump logic controller, parallel pumping software duly downloaded, 02 No. Differential Pressure Sensor / Transmitters, interfacing amongst all components and compatibility of I/O signals etc complete with other accessories as required.	item1099	1	NO
1080	1080	Variable Speed Pumping System for Secondary Chilled Water Pumps\nFor MMCH Hospital Building\nSupply, installation, testing and commissioning of Variable Speed Pumping system consisting of three numbers 20 HP variable frequency drive (VFD) having IP-54/55 enclosure with heat sink suitably interfaced with other system components, hand / auto macro designed for pumping application, 01 no. dedicated microprocessor based pump logic controller, parallel pumping software duly downloaded, 02 No. Differential Pressure Sensor / Transmitters, interfacing amongst all components and compatibility of I/O signals etc complete with other accessories as required.	item1100	1	NO
1081	1081	Variable Speed Pumping System for Secondary Chilled Water Pumps\nFor Medical College Building\nSupply, installation, testing and commissioning of Variable Speed Pumping system consisting of two numbers 15 HP variable frequency drive (VFD) having IP-54/55 enclosure with heat sink suitably interfaced with other system components, hand / auto macro designed for pumping application, 01 no. dedicated microprocessor based pump logic controller, parallel pumping software duly downloaded, 02 No. Differential Pressure Sensor / Transmitters, interfacing amongst all components and compatibility of I/O signals etc complete with other accessories as required.	item1101	2	NO
1082	1082	CTI Certified FRP Induced Draft Cooling Tower (300 TR)\nSupply, installation, testing and commissioning of CTI Certified FRP Induced draft, cross / counter flow, twin fan, direct driven, site erected cooling tower of capacity as mentioned below based on the parameters given below and complete with PVC Fill, Louvers, Drift Eliminator, Weather Proof IP 55 TEFC Motor (IE3), Propeller Fan, FRP Basin with additional sump in the bottom of the basin on every outlet point to avoid vortex formation in the condenser water pipe line, Hot dip galvanised Steel Ladder, Stainless Steel hardware including nut, bolt, washer etc. The cooling tower shall conform to technical specifications given in the tender. The maximum allowable sound power at a distance of 1 M from the cooling Tower shall be less than 75 dB. Tower fan motor shall be suitable for VFD operation and operation of VFD system shall be based approach of cooling tower.\nWater Flow - (4 GPM / TR)\nDesigned Wet Bulb Temperature - 27.8 °C\nWater Inlet / Outlet Temperature - 33.61 °C / 29.44 °C\nCooling Tower Basin Height - 300.0 MM\nFan Motor HP (Indicative) - 1 x 15 / 20 HP\nFan Motor RPM (Indicative) - Below 720 RPM\nCooling Tower Capacity: (2W+1S)	item1102	6	NO
1083	1083	VFD System For Cooling Tower\nSupply, installation, testing and commissioning of VFD having IP-54/55 enclosure from factory with heat sink for each cooling tower fan (15 / 20 HP Each, 3 Nos.) with VFD control panel & other accessories as required. VFD control panel shall be installed in the AC Plant Room. The system shall be complete with variable frequency drive (VFD) suitably interfaced with other system components, hand / auto macro designed, 01 no. dedicated microprocessor based logic controller, software duly downloaded, tempearture Sensor / Transmitters, interfacing amongst all components and compatibility of I/O signals etc complete with other accessories as required. Operation of VFD system shall be based approach of cooling tower.	item1103	2	NO
1084	1084	Pressurised Expansion Tank (Suitable for 1440 GPM Chilled Water, 600 TR)\nSupply, installation, testing and commissioning of pressurised insulated chilled water Expansion Tank of capacity as given below made of MS Sheet & finished with epoxy enamel, having interchangeable butile - EPDM membrane, operating pressure 10 Kg/cm² or as actually required, suitable HP 2 numbers pump (1W+1S), pressure switch, valves, make up water connection & the tank shall be complete with necessary controls etc. as required to make it fully functional. The capacity of each tank shall be 1000 Liters approx. Capacity of tank is for the guidance only & AC Contractor to quote as per actual requirement.	item1104	2	NO
1085	1085	Pressurised Expansion Tank (Suitable for 167 GPM Hot Water, 240 KW)\nSupply, installation, testing and commissioning of pressurised insulated hot water Expansion Tank of capacity as given below made of MS Sheet & finished with epoxy enamel, having interchangeable butile - EPDM membrane, operating pressure 10 Kg/cm² or as actually required, suitable HP 2 numbers pump (1W+1S), pressure switch, valves, make up water connection & the tank shall be complete with necessary controls etc. as required to make it fully functional. The capacity of each tank shall be 800 Liters approx. Capacity of tank is for the guidance only & AC Contractor to quote as per actual requirement.	item1105	2	NO
1086	1086	Hot Water Generator For Winter Heating / Monsoon Reheat (Hospital Building)\nSupply, installation, testing and commissioning of electrically operated Hot Water Generator of capacity 120 KW in multiple bank complete with PLC based microprocessor controls, electrical panels etc. confirming to technical specifications section. (2W+1S)\nInlet Water Temperature 50 °C\nOutlet Water Temperature 55 °C	item1106	6	NO
1087	1087	Hot Water Pump Sets\nSupply, installation, testing and commissioning of Vertical Inline split coupled hot water centrifugal pump sets with bronze impeller for hot water recirculation complete with TEFC (IE3) Sq. Cage induction motor with class \"F\" insulation, coupling guard, SS Shaft Grade 416, bronze impeller, factory fitted mechanical seal, flexible pipe connector at inlet and outlet etc. conforming to technical specification & as per following parameters. The hot water pumps shall also include the cost of thermal insulation. Hot water pumps shall be suitable for operation on variable frequency drives & conforming to the specifications of variable speed pumping system.\nHot Water Pump Sets (2W+1S)\nCapacity of Each Pump LPM 278\nPump Head (Mt) 27.5\nMotor HP 5.0	item1107	6	NO
1088	1088	Variable Speed Pumping System for Hot Water Pumps\nSupply, installation, testing and commissioning of Variable Speed Pumping system consisting of three number 5 / 7.5 HP variable frequency drive (VFD) having IP-55 enclosure with heat sink suitably interfaced with other system components, hand / auto macro designed for pumping application, interfacing amongst all components and compatibility of I/O signals etc complete with other accessories as required.	item1108	2	NO
1089	1089	Double Skin Floor Mounted AHU (CC + MERV 8 Filter)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted / ceiling suspended as per HVAC Drawing, horizontal type , fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply,\n6 Row cooling coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n1,500 CFM, 40 mm St. Pr., 6 Row CC (Floor Mounted / Ceiling Suspended)	item1109	4	NO
1090	1090	Double Skin Floor Mounted AHU (CC + MERV 8 Filter)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted / ceiling suspended as per HVAC Drawing, horizontal type , fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply,\n6 Row cooling coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n2,000 CFM, 40 mm St. Pr., 6 Row CC (Floor Mounted / Ceiling Suspended)	item1110	3	NO
1091	1091	Double Skin Floor Mounted AHU (CC + MERV 8 Filter)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted / ceiling suspended as per HVAC Drawing, horizontal type , fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply,\n6 Row cooling coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n3,000 CFM, 45 mm St. Pr., 6 Row CC (Floor Mounted / Ceiling Suspended)	item1111	1	NO
1092	1092	Double Skin Floor Mounted AHU (CC + MERV 8 Filter)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted / ceiling suspended as per HVAC Drawing, horizontal type , fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply,\n6 Row cooling coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n5,000 CFM, 45 mm St. Pr., 6 Row CC	item1112	1	NO
1093	1093	Double Skin Floor Mounted AHU (CC + MERV 8 Filter)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted / ceiling suspended as per HVAC Drawing, horizontal type , fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply,\n6 Row cooling coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n7,000 CFM, 50 mm St. Pr., 6 Row CC	item1113	1	NO
1094	1094	Double Skin Floor Mounted AHU (CC + MERV 8 Filter)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted / ceiling suspended as per HVAC Drawing, horizontal type , fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply,\n6 Row cooling coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n9,000 CFM, 50 mm St. Pr., 6 Row CC	item1114	5	NO
1095	1095	Double Skin Floor Mounted AHU (CC + MERV 8 Filter)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted / ceiling suspended as per HVAC Drawing, horizontal type , fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply,\n6 Row cooling coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n10,000 CFM, 50 mm St. Pr., 6 Row CC	item1115	1	NO
1096	1096	Double Skin Floor Mounted AHU (CC + MERV 8 Filter)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted / ceiling suspended as per HVAC Drawing, horizontal type , fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply,\n6 Row cooling coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n14,000 CFM, 55 mm St. Pr., 6 Row CC	item1116	1	NO
1097	1097	Double Skin Floor Mounted AHU (CC + MERV 8 Filter)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted / ceiling suspended as per HVAC Drawing, horizontal type , fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply,\n6 Row cooling coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n12,000 CFM, 55 mm St. Pr., 6 Row CC	item1117	3	NO
1098	1098	Double Skin Floor Mounted AHU (CC + HC + MERV 8 & 13)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted horizontal type, fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing for VFD & humidifier, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row cooling coil and 2 row heating coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, fine filter section with MERV 13 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n2,000 CFM, 60 mm St. Pr., 6 Row CC, 2 Row HC	item1118	8	NO
1099	1099	Double Skin Floor Mounted AHU (CC + HC + MERV 8 & 13)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted horizontal type, fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing for VFD & humidifier, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row cooling coil and 2 row heating coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, fine filter section with MERV 13 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n2,500 CFM, 60 mm St. Pr., 6 Row CC, 2 Row HC	item1119	1	NO
1100	1100	Double Skin Floor Mounted AHU (CC + HC + MERV 8 & 13)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted horizontal type, fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing for VFD & humidifier, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row cooling coil and 2 row heating coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, fine filter section with MERV 13 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n3,000 CFM, 60 mm St. Pr., 6 Row CC, 2 Row HC	item1120	1	NO
1101	1101	Double Skin Floor Mounted AHU (CC + HC + MERV 8 & 13)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted horizontal type, fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing for VFD & humidifier, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row cooling coil and 2 row heating coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, fine filter section with MERV 13 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n3,500 CFM, 60 mm St. Pr., 6 Row CC, 2 Row HC	item1121	1	NO
1102	1102	Double Skin Floor Mounted AHU (CC + HC + MERV 8 & 13)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted horizontal type, fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing for VFD & humidifier, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row cooling coil and 2 row heating coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, fine filter section with MERV 13 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n4,000 CFM, 65 mm St. Pr., 6 Row CC, 2 Row HC	item1122	1	NO
1103	1103	Double Skin Floor Mounted AHU (CC + HC + MERV 8 & 13)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted horizontal type, fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing for VFD & humidifier, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row cooling coil and 2 row heating coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, fine filter section with MERV 13 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n5,000 CFM, 65 mm St. Pr., 6 Row CC, 2 Row HC	item1123	1	NO
1104	1104	Double Skin Floor Mounted AHU (CC + HC + MERV 8 & 13)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted horizontal type, fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing for VFD & humidifier, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row cooling coil and 2 row heating coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, fine filter section with MERV 13 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n6,000 CFM, 65 mm St. Pr., 6 Row CC, 2 Row HC	item1124	5	NO
1105	1105	Double Skin Floor Mounted AHU (CC + HC + MERV 8 & 13)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted horizontal type, fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing for VFD & humidifier, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row cooling coil and 2 row heating coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, fine filter section with MERV 13 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n7,000 CFM, 70 mm St. Pr., 6 Row CC, 2 Row HC	item1125	3	NO
1106	1106	Double Skin Floor Mounted AHU (CC + HC + MERV 8 & 13)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted horizontal type, fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing for VFD & humidifier, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row cooling coil and 2 row heating coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, fine filter section with MERV 13 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n8,000 CFM, 70 mm St. Pr., 6 Row CC, 2 Row HC	item1126	2	NO
1107	1107	Double Skin Floor Mounted AHU (CC + HC + MERV 8 & 13)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted horizontal type, fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing for VFD & humidifier, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row cooling coil and 2 row heating coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, fine filter section with MERV 13 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n8,500 CFM, 70 mm St. Pr., 6 Row CC, 2 Row HC	item1127	1	NO
1108	1108	Double Skin Floor Mounted AHU (CC + HC + MERV 8 & 13)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted horizontal type, fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing for VFD & humidifier, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row cooling coil and 2 row heating coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, fine filter section with MERV 13 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n10,000 CFM, 70 mm St. Pr., 6 Row CC, 2 Row HC	item1128	6	NO
1109	1109	Double Skin Floor Mounted AHU (CC + HC + MERV 8 & 13)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted horizontal type, fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing for VFD & humidifier, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row cooling coil and 2 row heating coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, fine filter section with MERV 13 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n12,000 CFM, 75 mm St. Pr., 6 Row CC, 2 Row HC	item1129	3	NO
1110	1110	Double Skin Floor Mounted AHU (CC + HC + MERV 8 & 13)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted horizontal type, fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing for VFD & humidifier, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row cooling coil and 2 row heating coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, fine filter section with MERV 13 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n13,000 CFM, 75 mm St. Pr., 6 Row CC, 2 Row HC	item1130	1	NO
1111	1111	Double Skin Floor Mounted AHU (CC + HC + MERV 8 & 13)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted horizontal type, fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing for VFD & humidifier, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row cooling coil and 2 row heating coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, fine filter section with MERV 13 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n14,000 CFM, 75 mm St. Pr., 6 Row CC, 2 Row HC	item1131	5	NO
1112	1112	Double Skin Floor Mounted AHU (CC + HC + MERV 8 & 13)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted horizontal type, fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing for VFD & humidifier, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row cooling coil and 2 row heating coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, fine filter section with MERV 13 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n15,000 CFM, 75 mm St. Pr., 6 Row CC, 2 Row HC	item1132	5	NO
1113	1113	Double Skin Floor Mounted AHU (CC + HC + MERV 8 & 13)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted horizontal type, fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing for VFD & humidifier, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row cooling coil and 2 row heating coil made of Aluminium finned Copper tube with coil section, Copper Header, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, fine filter section with MERV 13 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.\nThe AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n16,000 CFM, 75 mm St. Pr., 6 Row CC, 2 Row HC	item1133	5	NO
1114	1114	Double Skin Floor Mounted AHU (For OT With 10 ACH/Hr)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm polished SS sheet inside complete with supply & exhaust blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters for both supply & exhaust fan motor, power control panel with necessary switchgears incoming & outgoing for VFD & humidifier, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 8 row cooling & 2 row heating coil made of Aluminium finned Copper tube, Copper header with coil section, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame in both the supply & exhaust side of AHU, fine filter section with MERV 13 filters in extruded aluminium frame in supply after fan, (Hepa filters shall be at terminals along with laminar flow plenum & not to be included in the cost), mixing chamber, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.The AHU panels shall be insulated with 48mm thick & 36 Kg/m³ density PU foam & shall have thermal break. These AHUs shall have air inlet / outlet connection made of aluminium 20 G & all fixing arrangement / blank off shall be of SS. The static pressure given below is for guidance only actual to be calculated by vendor.\n3500 CFM Supply Air, 8 Row CC, 2 Row HC, 125 mm St. Pr., Supply Fan, 850 CFM Ex. Air Fan, 40 mm St. Pr.for Exhaust fan with other accessories as specified)	item1134	13	NO
1115	1115	Double Skin Floor Mounted AHU (For OT With 10 ACH/Hr)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm polished SS sheet inside complete with supply & exhaust blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters for both supply & exhaust fan motor, power control panel with necessary switchgears incoming & outgoing for VFD & humidifier, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 8 row cooling & 2 row heating coil made of Aluminium finned Copper tube, Copper header with coil section, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame in both the supply & exhaust side of AHU, fine filter section with MERV 13 filters in extruded aluminium frame in supply after fan, (Hepa filters shall be at terminals along with laminar flow plenum & not to be included in the cost), mixing chamber, polished stainless steel drain pan made out of 22 G sheet duly insulated, AHU panels insulation with 48mm thick & 36 Kg/m³ density PU foam, thermal break, motor & blower assembly mounted on Aluminium extruded section only, air inlet / outlet connection made of aluminium 20 G & all fixing arrangement / blank off made of SS. The static pressure given below is for guidance only actual to be calculated by vendor.\n5000 CFM Supply Air, 8 Row CC, 2 Row HC, 125 mm St. Pr., Supply Fan, 1200 CFM Ex. Air Fan, 40 mm St. Pr.for Exhaust fan with other accessories as specified)	item1135	1	NO
1116	1116	Double Skin Floor Mounted AHU (For 100% Fresh Air OT)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm polished SS sheet inside complete with supply & exhaust blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters for both supply & exhaust fan motor, power control panel with necessary switchgears incoming & outgoing for VFD, HRW & humidifier, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 8 row cooling & 2 row heating coil made of Aluminium finned Copper tube, Copper header with coil section, Coilotron UV section only of 600 mm in length in floor mounted AHU, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame in both the supply & exhaust side of AHU, fine filter section with MERV 13 filters in extruded aluminium frame in supply after fan, (Hepa filters shall be at terminals along with laminar flow plenum & not to be included in the cost), Heat Recovery Wheel with HRW Section, mixing chamber, polished stainless steel drain pan made out of 22 G sheet duly insulated, AHU panels insulation with 48mm thick & 36 Kg/m³ density PU foam, thermal break, air inlet / outlet connection made of aluminium 20 G & all fixing arrangement / blank off shall be of SS The static pressure given below is for guidance only actual shall be as per shop drawings.\n(3500 CFM Supply Air Blower, 8 Row CC, 2 Row HC, 140 mm St. Pr., 3000 CFM Ex. Air Blower, 60 mm St. Pr. with other accessories as specified above)	item1136	9	NO
1117	1117	Double Skin Floor Mounted AHU (100% Fresh Air For Post Mortem Autopsy Room, Dissection Hall)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with supply & exhaust blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters for both supply & exhaust fan motor, power control panel with necessary switchgears incoming & outgoing for VFD & HRW, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 8 row cooling coil made of Aluminium finned Copper tube, Copper header with coil section, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame in both the supply & exhaust side of AHU, Coilotron UV section only of 600 mm in length in floor mounted AHU, fine filter section with MERV 13 filters in extruded aluminium frame in supply after fan, Heat Recovery Wheel with HRW Section, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers. The AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n(2000 CFM Supply Air Blower, 8 Row CC, 85 mm St. Pr., 2300 CFM Ex. Air Blower, HRW, 50 mm St. Pr. with other accessories as specified above)	item1137	1	NO
1118	1118	Double Skin Floor Mounted AHU (100% Fresh Air For Post Mortem Autopsy Room, Dissection Hall)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with supply & exhaust blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters for both supply & exhaust fan motor, power control panel with necessary switchgears incoming & outgoing for VFD & HRW, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 8 row cooling coil made of Aluminium finned Copper tube, Copper header with coil section, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame in both the supply & exhaust side of AHU, Coilotron UV section only of 600 mm in length in floor mounted AHU, fine filter section with MERV 13 filters in extruded aluminium frame in supply after fan, Heat Recovery Wheel with HRW Section, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers. The AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n(3500 CFM Supply Air Blower, 8 Row CC, 100 mm St. Pr., 4000 CFM Ex. Air Blower, HRW, 60 mm St. Pr. with other accessories as specified above)	item1138	1	NO
1119	1119	Double Skin Floor Mounted AHU (100% Fresh Air For Post Mortem Autopsy Room, Dissection Hall)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with supply & exhaust blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters for both supply & exhaust fan motor, power control panel with necessary switchgears incoming & outgoing for VFD & HRW, control transformer 220 / 24 V & auxiliary relay etc as required, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 8 row cooling coil made of Aluminium finned Copper tube, Copper header with coil section, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame in both the supply & exhaust side of AHU, Coilotron UV section only of 600 mm in length in floor mounted AHU, fine filter section with MERV 13 filters in extruded aluminium frame in supply after fan, Heat Recovery Wheel with HRW Section, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers. The AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The static pressure given below is for guidance only actual to be calculated by vendor.\n(10,000 CFM Supply Air Blower, 8 Row CC, 100 mm St. Pr., 10,500 CFM Ex. Air Blower, HRW, 60 mm St. Pr. with other accessories as specified above)	item1139	1	NO
1120	1120	Fan Coil Unit\nSupply, installation, testing and commissioning of GI powder coated fan coil units complete with fan, 3 speed motor, 4 row deep cooling coil, aluminium filters MERV 8, filter box, double sandwitched insulated extended tray to accomodate all FCU valves within extended tray duly insulated with nitrile rubber as specified for pipe insulation, supporting arrangement, electrical wiring etc. The fan shall be selected for 5 - 8 mm external static pressure as given below & as per approved drawing.\nThe complete fan coil unit shall have acoustically lined casing & shall be in line with the standard specification. The capacity of fan coil units shall be as follows. The FCU shall be with one set of commissioning filter which shall be replaced with actual filter.\n1.0 TR, 4 mm external static	item1140	27	NO
1121	1121	Fan Coil Unit\nSupply, installation, testing and commissioning of GI powder coated fan coil units complete with fan, 3 speed motor, 4 row deep cooling coil, aluminium filters MERV 8, filter box, double sandwitched insulated extended tray to accomodate all FCU valves within extended tray duly insulated with nitrile rubber as specified for pipe insulation, supporting arrangement, electrical wiring etc. The fan shall be selected for 5 - 8 mm external static pressure as given below & as per approved drawing.\nThe complete fan coil unit shall have acoustically lined casing & shall be in line with the standard specification. The capacity of fan coil units shall be as follows. The FCU shall be with one set of commissioning filter which shall be replaced with actual filter.\n1.5 TR, 4 mm external static	item1141	63	NO
1122	1122	Fan Coil Unit\nSupply, installation, testing and commissioning of GI powder coated fan coil units complete with fan, 3 speed motor, 4 row deep cooling coil, aluminium filters MERV 8, filter box, double sandwitched insulated extended tray to accomodate all FCU valves within extended tray duly insulated with nitrile rubber as specified for pipe insulation, supporting arrangement, electrical wiring etc. The fan shall be selected for 5 - 8 mm external static pressure as given below & as per approved drawing.\nThe complete fan coil unit shall have acoustically lined casing & shall be in line with the standard specification. The capacity of fan coil units shall be as follows. The FCU shall be with one set of commissioning filter which shall be replaced with actual filter.\n2.0 TR, 5 mm external static	item1142	1	NO
1123	1123	Fan Coil Unit\nSupply, installation, testing and commissioning of GI powder coated fan coil units complete with fan, 3 speed motor, 4 row deep cooling coil, aluminium filters MERV 8, filter box, double sandwitched insulated extended tray to accomodate all FCU valves within extended tray duly insulated with nitrile rubber as specified for pipe insulation, supporting arrangement, electrical wiring etc. The fan shall be selected for 5 - 8 mm external static pressure as given below & as per approved drawing.\nThe complete fan coil unit shall have acoustically lined casing & shall be in line with the standard specification. The capacity of fan coil units shall be as follows. The FCU shall be with one set of commissioning filter which shall be replaced with actual filter.\n2.5 TR, 5 mm external static	item1143	4	NO
1124	1124	Fan Coil Unit\nSupply, installation, testing and commissioning of GI powder coated fan coil units complete with fan, 3 speed motor, 4 row deep cooling coil, aluminium filters MERV 8, filter box, double sandwitched insulated extended tray to accomodate all FCU valves within extended tray duly insulated with nitrile rubber as specified for pipe insulation, supporting arrangement, electrical wiring etc. The fan shall be selected for 5 - 8 mm external static pressure as given below & as per approved drawing.\nThe complete fan coil unit shall have acoustically lined casing & shall be in line with the standard specification. The capacity of fan coil units shall be as follows. The FCU shall be with one set of commissioning filter which shall be replaced with actual filter.\n3.0 TR, 8 mm external static	item1144	5	NO
1125	1125	FCU Valves With Three Way Bypass Flushing Unit Set For Cooling Coil\nSupply, installation, testing and commissioning of factory insulated jacket copper / brass connection set for chilled water line consisting of Pressure Independant Balancing Cum Two Way Control Valve in a single body equipped with electronic modulating actuator working on 2-10 V DC, 4- 20 mA electric signal, ball valve with strainer at inlet, ball valve at outlet, three way bypass flushing unit, copper / brass connection set with braided pipe flexible connector at in and out at one end etc. Ball valves & strainer sizes in cooling coil shall be 25 mm up to 2 TR & 32 mm for 2.5 TR & above. PIBCV valves sizes in cooling coil shall be 20 mm up to 2 TR & 25 mm for 2.5 TR & above.	item1145	94	NO
1126	1126	Thermostat for FCU\nSupply, installation, testing and commissioning of automatic control for Fan Coil Units for cooling / heating consisting of pressure independant balancing cum two way control valve (already quantified herein) & digital thermostat, which will have provision of setting of room temperature, setting of fan speed (High, Medium, Low). The quoted price of thermostat shall include the cost of 20mm MS conduits, control cabling, MS Box etc as required. Thermostats shall be interlocked to prevent simultaneous heating and cooling.	item1146	94	Set
1127	1127	Digital Display Type Thermostat For AHU\nSupply, installation, testing and commissioning of Proportional cooling / heating, digital display, communicating type thermostat at air-handler. Temperature Sensor for AHUs are also specified in BMS Part. Thermostat shall be installed in case BMS commissioning is significantly delayed.	item1147	10	NO
1128	1128	For All OT AHU (T + RH Control)\nSupply, installation, testing and commissioning of digital display, communicating type thermostat with humidistat for various air handling Units. The thermostat with built in / individual humidistat shall have provision of setting of space temperature & RH and shall display the both. The quoted price of thermostat / humidistat shall include the cost of 20mm MS conduits, control cabling, MS Box etc as required. Temperature + RH Sensor for AHUs are also specified in BMS Part. Thermostat with built in humidistat shall be installed in case BMS commissioning is significantly delayed.	item1148	8	NO
1129	1129	Pressure Independant Balancing Cum Two Way Control Valve (Cooling Coil For AHU)\nSupply, installation, testing and commissioning of Pressure Independant Balancing Cum Two Way Control Valve in a single body equipped with electronic modulating actuator working on 2-10 V DC, 4- 20 mA electric signal. The minimum close off Pressure of actuator must be 1.5 times shut off head of pump as per specifications of following sizes:\n20 mm Dia, Maximum 2.4 GPM	item1149	8	NO
1130	1130	Pressure Independant Balancing Cum Two Way Control Valve (Cooling Coil For AHU)\nSupply, installation, testing and commissioning of Pressure Independant Balancing Cum Two Way Control Valve in a single body equipped with electronic modulating actuator working on 2-10 V DC, 4- 20 mA electric signal. The minimum close off Pressure of actuator must be 1.5 times shut off head of pump as per specifications of following sizes:\n25 mm Dia, Maximum 5 GPM	item1150	5	NO
1131	1131	Pressure Independant Balancing Cum Two Way Control Valve (Cooling Coil For AHU)\nSupply, installation, testing and commissioning of Pressure Independant Balancing Cum Two Way Control Valve in a single body equipped with electronic modulating actuator working on 2-10 V DC, 4- 20 mA electric signal. The minimum close off Pressure of actuator must be 1.5 times shut off head of pump as per specifications of following sizes:\n32 mm Dia, Maximum 15 GPM	item1151	49	NO
1132	1132	Pressure Independant Balancing Cum Two Way Control Valve (Cooling Coil For AHU)\nSupply, installation, testing and commissioning of Pressure Independant Balancing Cum Two Way Control Valve in a single body equipped with electronic modulating actuator working on 2-10 V DC, 4- 20 mA electric signal. The minimum close off Pressure of actuator must be 1.5 times shut off head of pump as per specifications of following sizes:\n40 mm Dia, Maximum 26 GPM	item1152	19	NO
1133	1133	Pressure Independant Balancing Cum Two Way Control Valve (Cooling Coil For AHU)\nSupply, installation, testing and commissioning of Pressure Independant Balancing Cum Two Way Control Valve in a single body equipped with electronic modulating actuator working on 2-10 V DC, 4- 20 mA electric signal. The minimum close off Pressure of actuator must be 1.5 times shut off head of pump as per specifications of following sizes:\n50 mm Dia, Maximum 54 GPM	item1153	47	NO
1134	1134	Pressure Independant Balancing Cum Two Way Control Valve (Cooling Coil For AHU)\nSupply, installation, testing and commissioning of Pressure Independant Balancing Cum Two Way Control Valve in a single body equipped with electronic modulating actuator working on 2-10 V DC, 4- 20 mA electric signal. The minimum close off Pressure of actuator must be 1.5 times shut off head of pump as per specifications of following sizes:\n65 mm Dia, Maximum 80 GPM	item1154	13	NO
1135	1135	Pressure Independant Balancing Cum Two Way Control Valve (Cooling Coil For AHU)\nSupply, installation, testing and commissioning of Pressure Independant Balancing Cum Two Way Control Valve in a single body equipped with electronic modulating actuator working on 2-10 V DC, 4- 20 mA electric signal. The minimum close off Pressure of actuator must be 1.5 times shut off head of pump as per specifications of following sizes:\n80 mm Dia, Maximum 125 GPM	item1155	11	NO
1136	1136	Inline Fans\nSupply, installation, testing and commissioning of Inline fans with motor complete in all respect & of following capacities. The casing of inline fans shall be acoustically lined & shall be selected for lower noise level. Fan motor shall have inbuilt speed controller.\n100 - 200 CFM (10mm static pressure, single phase)	item1156	61	NO
1137	1137	Inline Fans\nSupply, installation, testing and commissioning of Inline fans with motor complete in all respect & of following capacities. The casing of inline fans shall be acoustically lined & shall be selected for lower noise level. Fan motor shall have inbuilt speed controller.\n300 - 500 CFM (12mm static pressure, single phase)	item1157	99	NO
1138	1138	Inline Fans\nSupply, installation, testing and commissioning of Inline fans with motor complete in all respect & of following capacities. The casing of inline fans shall be acoustically lined & shall be selected for lower noise level. Fan motor shall have inbuilt speed controller.\n600 - 900 CFM (15mm static pressure, single phase)	item1158	4	NO
1139	1139	Inline Fans\nSupply, installation, testing and commissioning of Inline fans with motor complete in all respect & of following capacities. The casing of inline fans shall be acoustically lined & shall be selected for lower noise level. Fan motor shall have inbuilt speed controller.\n1000 - 1500 CFM (15mm static pressure, single phase)	item1159	94	NO
1140	1140	Plastic Propeller Fans\nSupply, installation, testing and commissioning of propeller exhaust fans of various capacities as given below suitable for 240 volts, 50 Hz, single phase AC supply complete with gravity louvers & speed regulator etc.\n100 - 200 CFM	item1160	184	NO
1141	1141	Plastic Propeller Fans\nSupply, installation, testing and commissioning of propeller exhaust fans of various capacities as given below suitable for 240 volts, 50 Hz, single phase AC supply complete with gravity louvers & speed regulator etc.\n300 - 500 CFM	item1161	41	NO
1142	1142	Plastic Propeller Fans\nSupply, installation, testing and commissioning of propeller exhaust fans of various capacities as given below suitable for 240 volts, 50 Hz, single phase AC supply complete with gravity louvers & speed regulator etc.\n600 - 1000 CFM	item1162	24	NO
1143	1143	Axial Flow Fan For Basement Ventilation, Lift Well, Lobby & Staircase Pressurisation, Fresh Air & Exhaust Air Ventilation etc.\nSupply, installation, testing and commissioning of ceiling mounted Tube Axial flow fans with adjustable pitch blade, MS / GI long casing (2mm thick up to 800 mm dia fan, 3 mm thick from 900 to 1250 mm dia & 4 mm thick above 1300 mm dia) , cast aluminium alloy impeller complete with TEFC (Motor Efficiency IE3) Sq. Cage Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, three phase A.C supply with support, mountings, vibration isolators, fire retardant flexible canvass connector 150 mm deep (Inlet & Outlet as required), bird screen (Inlet & Outlet as required) etc. & of following capacity. The complete fan along with motor shall be suitable for 250 °C temperature rated for 2 hours. Fan outlet velocity shall be limited to maximum of 16 m/sec. Fan Dia, Fan motor KW & static pressure given below are for guideline & actual Dia / KW shall be as per manufacturer selection based on maximum 16 m/sec outlet velocity. Cost of fan & motor shall be inclusive of the actual fan static pressure required.\nAxial Fan shall be AMCA certified for Air and Sound performance in accordance to AMCA 210 and AMCA 300. Complete certified model appearing on AMCA web site shall be accepted. Complete Fan shall be tested and approved by UL in accordance with \"Power Ventilators for Smoke Control Systems\" for 250 °C for 2 hours.\nManufacturer shall furnish AMCA Test Certificate for air & sound performance along with UL fire test certificate (Latest) for each fan sourced from that particular factory.\n50,000 CFM (32mm st. pr, 1400 mm Dia Axial Fan, 15 KW, 1450 RPM Fan Motor, Direct Driven)	item1163	6	NO
1144	1144	Axial Flow Fan For Basement Ventilation, Lift Well, Lobby & Staircase Pressurisation, Fresh Air & Exhaust Air Ventilation etc.\nSupply, installation, testing and commissioning of ceiling mounted Tube Axial flow fans with adjustable pitch blade, MS / GI long casing (2mm thick up to 800 mm dia fan, 3 mm thick from 900 to 1250 mm dia & 4 mm thick above 1300 mm dia) , cast aluminium alloy impeller complete with TEFC (Motor Efficiency IE3) Sq. Cage Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, three phase A.C supply with support, mountings, vibration isolators, fire retardant flexible canvass connector 150 mm deep (Inlet & Outlet as required), bird screen (Inlet & Outlet as required) etc. & of following capacity. The complete fan along with motor shall be suitable for 250 °C temperature rated for 2 hours. Fan outlet velocity shall be limited to maximum of 16 m/sec. Fan Dia, Fan motor KW & static pressure given below are for guideline & actual Dia / KW shall be as per manufacturer selection based on maximum 16 m/sec outlet velocity. Cost of fan & motor shall be inclusive of the actual fan static pressure required.\nAxial Fan shall be AMCA certified for Air and Sound performance in accordance to AMCA 210 and AMCA 300. Complete certified model appearing on AMCA web site shall be accepted. Complete Fan shall be tested and approved by UL in accordance with \"Power Ventilators for Smoke Control Systems\" for 250 °C for 2 hours.\nManufacturer shall furnish AMCA Test Certificate for air & sound performance along with UL fire test certificate (Latest) for each fan sourced from that particular factory.\n40,000 CFM (25mm st. pr, 1250 mm Dia Axial Fan, 11 KW, 1450 RPM Fan Motor, Direct Driven)	item1164	40	NO
1145	1145	Axial Flow Fan For Basement Ventilation, Lift Well, Lobby & Staircase Pressurisation, Fresh Air & Exhaust Air Ventilation etc.\nSupply, installation, testing and commissioning of ceiling mounted Tube Axial flow fans with adjustable pitch blade, MS / GI long casing (2mm thick up to 800 mm dia fan, 3 mm thick from 900 to 1250 mm dia & 4 mm thick above 1300 mm dia) , cast aluminium alloy impeller complete with TEFC (Motor Efficiency IE3) Sq. Cage Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, three phase A.C supply with support, mountings, vibration isolators, fire retardant flexible canvass connector 150 mm deep (Inlet & Outlet as required), bird screen (Inlet & Outlet as required) etc. & of following capacity. The complete fan along with motor shall be suitable for 250 °C temperature rated for 2 hours. Fan outlet velocity shall be limited to maximum of 16 m/sec. Fan Dia, Fan motor KW & static pressure given below are for guideline & actual Dia / KW shall be as per manufacturer selection based on maximum 16 m/sec outlet velocity. Cost of fan & motor shall be inclusive of the actual fan static pressure required.\nAxial Fan shall be AMCA certified for Air and Sound performance in accordance to AMCA 210 and AMCA 300. Complete certified model appearing on AMCA web site shall be accepted. Complete Fan shall be tested and approved by UL in accordance with \"Power Ventilators for Smoke Control Systems\" for 250 °C for 2 hours.\nManufacturer shall furnish AMCA Test Certificate for air & sound performance along with UL fire test certificate (Latest) for each fan sourced from that particular factory.\n33,000 CFM (25mm st. pr, 1100 mm Dia Axial Fan, 9.3 KW, 1450 RPM Fan Motor, Direct Driven)	item1165	2	NO
1146	1146	Axial Flow Fan For Basement Ventilation, Lift Well, Lobby & Staircase Pressurisation, Fresh Air & Exhaust Air Ventilation etc.\nSupply, installation, testing and commissioning of ceiling mounted Tube Axial flow fans with adjustable pitch blade, MS / GI long casing (2mm thick up to 800 mm dia fan, 3 mm thick from 900 to 1250 mm dia & 4 mm thick above 1300 mm dia) , cast aluminium alloy impeller complete with TEFC (Motor Efficiency IE3) Sq. Cage Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, three phase A.C supply with support, mountings, vibration isolators, fire retardant flexible canvass connector 150 mm deep (Inlet & Outlet as required), bird screen (Inlet & Outlet as required) etc. & of following capacity. The complete fan along with motor shall be suitable for 250 °C temperature rated for 2 hours. Fan outlet velocity shall be limited to maximum of 16 m/sec. Fan Dia, Fan motor KW & static pressure given below are for guideline & actual Dia / KW shall be as per manufacturer selection based on maximum 16 m/sec outlet velocity. Cost of fan & motor shall be inclusive of the actual fan static pressure required.\nAxial Fan shall be AMCA certified for Air and Sound performance in accordance to AMCA 210 and AMCA 300. Complete certified model appearing on AMCA web site shall be accepted. Complete Fan shall be tested and approved by UL in accordance with \"Power Ventilators for Smoke Control Systems\" for 250 °C for 2 hours.\nManufacturer shall furnish AMCA Test Certificate for air & sound performance along with UL fire test certificate (Latest) for each fan sourced from that particular factory.\n20,000 CFM (25mm st. pr, 1000 mm Dia Axial Fan, 7.5 KW, 1450 RPM Fan Motor, Direct Driven)	item1166	9	NO
1147	1147	Axial Flow Fan For Basement Ventilation, Lift Well, Lobby & Staircase Pressurisation, Fresh Air & Exhaust Air Ventilation etc.\nSupply, installation, testing and commissioning of ceiling mounted Tube Axial flow fans with adjustable pitch blade, MS / GI long casing (2mm thick up to 800 mm dia fan, 3 mm thick from 900 to 1250 mm dia & 4 mm thick above 1300 mm dia) , cast aluminium alloy impeller complete with TEFC (Motor Efficiency IE3) Sq. Cage Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, three phase A.C supply with support, mountings, vibration isolators, fire retardant flexible canvass connector 150 mm deep (Inlet & Outlet as required), bird screen (Inlet & Outlet as required) etc. & of following capacity. The complete fan along with motor shall be suitable for 250 °C temperature rated for 2 hours. Fan outlet velocity shall be limited to maximum of 16 m/sec. Fan Dia, Fan motor KW & static pressure given below are for guideline & actual Dia / KW shall be as per manufacturer selection based on maximum 16 m/sec outlet velocity. Cost of fan & motor shall be inclusive of the actual fan static pressure required.\nAxial Fan shall be AMCA certified for Air and Sound performance in accordance to AMCA 210 and AMCA 300. Complete certified model appearing on AMCA web site shall be accepted. Complete Fan shall be tested and approved by UL in accordance with \"Power Ventilators for Smoke Control Systems\" for 250 °C for 2 hours.\nManufacturer shall furnish AMCA Test Certificate for air & sound performance along with UL fire test certificate (Latest) for each fan sourced from that particular factory.\n15,000 CFM (25mm st. pr, 900 mm Dia Axial Fan, 3.7 KW, 1450 RPM Fan Motor, Direct Driven)	item1167	9	NO
1148	1148	Axial Flow Fan For Basement Ventilation, Lift Well, Lobby & Staircase Pressurisation, Fresh Air & Exhaust Air Ventilation etc.\nSupply, installation, testing and commissioning of ceiling mounted Tube Axial flow fans with adjustable pitch blade, MS / GI long casing (2mm thick up to 800 mm dia fan, 3 mm thick from 900 to 1250 mm dia & 4 mm thick above 1300 mm dia) , cast aluminium alloy impeller complete with TEFC (Motor Efficiency IE3) Sq. Cage Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, three phase A.C supply with support, mountings, vibration isolators, fire retardant flexible canvass connector 150 mm deep (Inlet & Outlet as required), bird screen (Inlet & Outlet as required) etc. & of following capacity. The complete fan along with motor shall be suitable for 250 °C temperature rated for 2 hours. Fan outlet velocity shall be limited to maximum of 16 m/sec. Fan Dia, Fan motor KW & static pressure given below are for guideline & actual Dia / KW shall be as per manufacturer selection based on maximum 16 m/sec outlet velocity. Cost of fan & motor shall be inclusive of the actual fan static pressure required.\nAxial Fan shall be AMCA certified for Air and Sound performance in accordance to AMCA 210 and AMCA 300. Complete certified model appearing on AMCA web site shall be accepted. Complete Fan shall be tested and approved by UL in accordance with \"Power Ventilators for Smoke Control Systems\" for 250 °C for 2 hours.\nManufacturer shall furnish AMCA Test Certificate for air & sound performance along with UL fire test certificate (Latest) for each fan sourced from that particular factory.\n12,000 CFM (25mm st. pr, 800 mm Dia Axial Fan, 3.7 KW, 1450 RPM Fan Motor, Direct Driven)	item1168	3	NO
1149	1149	Axial Flow Fan For Basement Ventilation, Lift Well, Lobby & Staircase Pressurisation, Fresh Air & Exhaust Air Ventilation etc.\nSupply, installation, testing and commissioning of ceiling mounted Tube Axial flow fans with adjustable pitch blade, MS / GI long casing (2mm thick up to 800 mm dia fan, 3 mm thick from 900 to 1250 mm dia & 4 mm thick above 1300 mm dia) , cast aluminium alloy impeller complete with TEFC (Motor Efficiency IE3) Sq. Cage Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, three phase A.C supply with support, mountings, vibration isolators, fire retardant flexible canvass connector 150 mm deep (Inlet & Outlet as required), bird screen (Inlet & Outlet as required) etc. & of following capacity. The complete fan along with motor shall be suitable for 250 °C temperature rated for 2 hours. Fan outlet velocity shall be limited to maximum of 16 m/sec. Fan Dia, Fan motor KW & static pressure given below are for guideline & actual Dia / KW shall be as per manufacturer selection based on maximum 16 m/sec outlet velocity. Cost of fan & motor shall be inclusive of the actual fan static pressure required.\nAxial Fan shall be AMCA certified for Air and Sound performance in accordance to AMCA 210 and AMCA 300. Complete certified model appearing on AMCA web site shall be accepted. Complete Fan shall be tested and approved by UL in accordance with \"Power Ventilators for Smoke Control Systems\" for 250 °C for 2 hours.\nManufacturer shall furnish AMCA Test Certificate for air & sound performance along with UL fire test certificate (Latest) for each fan sourced from that particular factory.\n10,000 CFM (20mm st. pr, 800 mm Dia Axial Fan, 2.2 KW, 1450 RPM Fan Motor, Direct Driven)	item1169	72	NO
1150	1150	Axial Flow Fan For Basement Ventilation, Lift Well, Lobby & Staircase Pressurisation, Fresh Air & Exhaust Air Ventilation etc.\nSupply, installation, testing and commissioning of ceiling mounted Tube Axial flow fans with adjustable pitch blade, MS / GI long casing (2mm thick up to 800 mm dia fan, 3 mm thick from 900 to 1250 mm dia & 4 mm thick above 1300 mm dia) , cast aluminium alloy impeller complete with TEFC (Motor Efficiency IE3) Sq. Cage Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, three phase A.C supply with support, mountings, vibration isolators, fire retardant flexible canvass connector 150 mm deep (Inlet & Outlet as required), bird screen (Inlet & Outlet as required) etc. & of following capacity. The complete fan along with motor shall be suitable for 250 °C temperature rated for 2 hours. Fan outlet velocity shall be limited to maximum of 16 m/sec. Fan Dia, Fan motor KW & static pressure given below are for guideline & actual Dia / KW shall be as per manufacturer selection based on maximum 16 m/sec outlet velocity. Cost of fan & motor shall be inclusive of the actual fan static pressure required.\nAxial Fan shall be AMCA certified for Air and Sound performance in accordance to AMCA 210 and AMCA 300. Complete certified model appearing on AMCA web site shall be accepted. Complete Fan shall be tested and approved by UL in accordance with \"Power Ventilators for Smoke Control Systems\" for 250 °C for 2 hours.\nManufacturer shall furnish AMCA Test Certificate for air & sound performance along with UL fire test certificate (Latest) for each fan sourced from that particular factory.\n8,000 CFM (20mm st. pr, 600 mm Dia Axial Fan, 2.2 KW, 1450 RPM Fan Motor, Direct Driven)	item1170	10	NO
1151	1151	Axial Flow Fan For Basement Ventilation, Lift Well, Lobby & Staircase Pressurisation, Fresh Air & Exhaust Air Ventilation etc.\nSupply, installation, testing and commissioning of ceiling mounted Tube Axial flow fans with adjustable pitch blade, MS / GI long casing (2mm thick up to 800 mm dia fan, 3 mm thick from 900 to 1250 mm dia & 4 mm thick above 1300 mm dia) , cast aluminium alloy impeller complete with TEFC (Motor Efficiency IE3) Sq. Cage Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, three phase A.C supply with support, mountings, vibration isolators, fire retardant flexible canvass connector 150 mm deep (Inlet & Outlet as required), bird screen (Inlet & Outlet as required) etc. & of following capacity. The complete fan along with motor shall be suitable for 250 °C temperature rated for 2 hours. Fan outlet velocity shall be limited to maximum of 16 m/sec. Fan Dia, Fan motor KW & static pressure given below are for guideline & actual Dia / KW shall be as per manufacturer selection based on maximum 16 m/sec outlet velocity. Cost of fan & motor shall be inclusive of the actual fan static pressure required.\nAxial Fan shall be AMCA certified for Air and Sound performance in accordance to AMCA 210 and AMCA 300. Complete certified model appearing on AMCA web site shall be accepted. Complete Fan shall be tested and approved by UL in accordance with \"Power Ventilators for Smoke Control Systems\" for 250 °C for 2 hours.\nManufacturer shall furnish AMCA Test Certificate for air & sound performance along with UL fire test certificate (Latest) for each fan sourced from that particular factory.\n6,000 CFM (20mm st. pr, 500 mm Dia Axial Fan, 1.1 KW, 1450 RPM Fan Motor, Direct Driven)	item1171	6	NO
1152	1152	Factory Fabricated Double Skin Airwasher\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Air-washer unit floor mounted type fabricated out of extruded aluminium section with 0.6mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside with blower, blower section and blower motor TEFC (Motor Efficiency IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, belt drive package, wet section & tank shall be made of 18 G stainless steel.\nThe Air-washer shall be complete with fill of depth 200 mm & face velocity across the fill shall be limited to 152 MPM. The Air-washer shall have an efficiency of 90% & shall be complete with water circulation pump GI B Class interconnecting piping & valves Aluminum viscous filters. The Air-washer shall have an efficiency of 90% & shall be complete with water circulation pump GI B Class interconnecting piping & valves Aluminum viscous filters. The airwasher panels shall be insulated with 23mm thick & 36 Kg/m³ density PU foam. The static pressure given below is for guidance only actual to be calculated by vendor. The Airwasher shall conform to specication given in the tender & shall be of following capacity.\n25,000 CFM, 1 x 800 mm Dia. Fan, 1 x 15 Kw Fan Motor, 50 mm St. Pressure, Monoblock Pump	item1172	2	NO
1153	1153	Factory Fabricated Double Skin Airwasher\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Air-washer unit floor mounted type fabricated out of extruded aluminium section with 0.6mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside with blower, blower section and blower motor TEFC (Motor Efficiency IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, belt drive package, wet section & tank shall be made of 18 G stainless steel.\nThe Air-washer shall be complete with fill of depth 200 mm & face velocity across the fill shall be limited to 152 MPM. The Air-washer shall have an efficiency of 90% & shall be complete with water circulation pump GI B Class interconnecting piping & valves Aluminum viscous filters. The Air-washer shall have an efficiency of 90% & shall be complete with water circulation pump GI B Class interconnecting piping & valves Aluminum viscous filters. The airwasher panels shall be insulated with 23mm thick & 36 Kg/m³ density PU foam. The static pressure given below is for guidance only actual to be calculated by vendor. The Airwasher shall conform to specication given in the tender & shall be of following capacity.\n20,000 CFM, 1 x 800 mm Dia. Fan, 1 x 11 Kw Fan Motor, 50 mm St. Pressure, Monoblock Pump	item1173	2	NO
1154	1154	Factory Fabricated Double Skin Airwasher\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Air-washer unit floor mounted type fabricated out of extruded aluminium section with 0.6mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside with blower, blower section and blower motor TEFC (Motor Efficiency IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, belt drive package, wet section & tank shall be made of 18 G stainless steel.\nThe Air-washer shall be complete with fill of depth 200 mm & face velocity across the fill shall be limited to 152 MPM. The Air-washer shall have an efficiency of 90% & shall be complete with water circulation pump GI B Class interconnecting piping & valves Aluminum viscous filters. The Air-washer shall have an efficiency of 90% & shall be complete with water circulation pump GI B Class interconnecting piping & valves Aluminum viscous filters. The airwasher panels shall be insulated with 23mm thick & 36 Kg/m³ density PU foam. The static pressure given below is for guidance only actual to be calculated by vendor. The Airwasher shall conform to specication given in the tender & shall be of following capacity.\n6,000 CFM, 1 x 450 mm Dia. Fan, 1 x 3.7 Kw Fan Motor, 50 mm St. Pressure, Monoblock Pump	item1174	1	NO
1155	1155	Mechanical Ventilation Unit (MVU)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Mechanical Ventilation Unit floor mounted type fabricated out of extruded aluminium section with 0.6mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside with blower, blower section and blower motor TEFC (Efficiency Class 1) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with belt drive package etc. The AHU panels shall be insulated with 23mm thick & 36 Kg/m³ density PU foam. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete MVU shall conform to tender specication. The static pressure given below is for guidance only actual to be calculated by vendor. The capacity of MVU shall be as follows:\n15,000 CFM, 30mm st. pr, 710 mm Dia Fan, 10.0 HP, 1440 RPM Fan Motor, Belt Driven	item1175	4	NO
1156	1156	Mechanical Ventilation Unit (MVU)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Mechanical Ventilation Unit floor mounted type fabricated out of extruded aluminium section with 0.6mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside with blower, blower section and blower motor TEFC (Efficiency Class 1) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with belt drive package etc. The AHU panels shall be insulated with 23mm thick & 36 Kg/m³ density PU foam. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete MVU shall conform to tender specication. The static pressure given below is for guidance only actual to be calculated by vendor. The capacity of MVU shall be as follows:\n9,000 CFM, 30mm st. pr, 610 mm Dia Fan, 5 / 7.5 HP, 1440 RPM Fan Motor, Belt Driven	item1176	3	NO
1157	1157	Mechanical Ventilation Unit (MVU)\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Mechanical Ventilation Unit floor mounted type fabricated out of extruded aluminium section with 0.6mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside with blower, blower section and blower motor TEFC (Efficiency Class 1) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with belt drive package etc. The AHU panels shall be insulated with 23mm thick & 36 Kg/m³ density PU foam. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete MVU shall conform to tender specication. The static pressure given below is for guidance only actual to be calculated by vendor. The capacity of MVU shall be as follows:\n6,500 CFM, 25mm st. pr, 500 mm Dia Fan, 5.0 HP, 1440 RPM Fan Motor, Belt Driven	item1177	1	NO
1158	1158	Factory Fabricated Double Skin Scrubber\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Scrubber unit floor mounted type fabricated out of extruded aluminium section with 0.6mm pre-plasticized /pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside with blower, blower section and blower motor TEFC (Motor Efficiency IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, belt drive package, wet section & tank shall be made of 18 G tainless steel. The Scrubber shall be complete with spray arrangement with metallic viscous filter & face velocity across the section shall be limited to 152 MPM. The scrubber shall have an efficiency of 90% & shall be complete with water circulation pump GI B Class interconnecting piping & valves, viscous filters. The scrubber panels shall be insulated with 23mm thick & 36 Kg/m³ density PU foam. The scrubber shall conform to specication given in the tender & shall be of following capacity.\n27,000 CFM, 1 x 800 mm Dia. Fan, 1 x 18.5 Kw Fan Motor, 80 mm St. Pressure, Monoblock Pump For Kitchen	item1178	1	NO
1159	1159	Factory Fabricated Double Skin Scrubber\nSupply, installation, testing and commissioning of factory fabricated Double Skinned Scrubber unit floor mounted type fabricated out of extruded aluminium section with 0.6mm pre-plasticized /pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside with blower, blower section and blower motor TEFC (Motor Efficiency IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, belt drive package, wet section & tank shall be made of 18 G tainless steel. The Scrubber shall be complete with spray arrangement with metallic viscous filter & face velocity across the section shall be limited to 152 MPM. The scrubber shall have an efficiency of 90% & shall be complete with water circulation pump GI B Class interconnecting piping & valves, viscous filters. The scrubber panels shall be insulated with 23mm thick & 36 Kg/m³ density PU foam. The scrubber shall conform to specication given in the tender & shall be of following capacity.\n8,000 CFM, 1 x 500 mm Dia. Fan, 1 x 5.6 Kw Fan Motor, 70 mm St. Pressure, Monoblock Pump For Kitchen	item1179	1	NO
1160	1160	VFD For 50% of Basment Parking Ventilation Fan (Only Normal Mode)\nSupply, installation, testing and commissioning of BMS compitable VFD for Axial Fan Motor having IP-54 OEM enclosure with heat sink, Built-in Harmonic Filters (ThDi less than 5%), EMC Filters (Electromagnetic Compatibility Filters Category C2 as per EN 61800-3), 2 PID Controlers, Automatic Energy Optimization / Load dependent flux optimization functionality for maximum energy savings & complying with the tender specifications.\n9.3 / 11 KW Motor	item1180	14	NO
1161	1161	CO Based Sensing System For Automated Working Of Parking Ventilation Fans (Normal & Fire Mode)\nSupply, installation, testing and commissioning of CO based sensing system for automatic running & modulating the VFD motor for parking ventilation supply and exahust fans for normal mode operation. Each set of system for each zone shall have six number of infrared CO senser,\nSensor shall have following measuring range & accuracy:-\nCO ( Electrochemical Type ) - Minimum measuring range : 0 ~ 500 ppm.\nCoverage of each sensor shall be approximately 5500 Sq Ft\nThe fan control mechanism shall be based on variable frequency drive . Each zone shall have controlled ventilation rate of 25% of the specified fan capacity at a given frequency, when CO measurement is below 25 ppm & Ventilation rate shall increase proportionally when CO level increase beyond 25 ppm and reach the maximum fan capacity when CO level is above 50 ppm. IF CO level reaches 150 ppm then fans in fire mode shall be switched on automatically. User should be able to vary these setpoints through web based software interface / supervisory controller. Logic Controller shall also have the logic to switch ON the fan when CO is above 20 ppm & switched OFF again when CO drops below 15 ppm. Logic Controller shall also have the facility of Timer & Manual Override for fan operation.	item1181	9	NO
1162	1162	Standalone, Networkable, Intelligent Microprocessor based Programmable DDC\nSupply, installation, testing and commissioning of one no. Standalone Intelligent Microprocessor based Programmable DDC (For Each Zone) with inbuilt HMI , Onboard Modbus port & network functionalities based upon KNX protocol along with suitable Enclosures with all accessories including necessary switchgear, step down transformer, internal power and control cabling (excluding power & control cable to Fan), complete in all respect & as required to suit the site conditions etc. Each Set of DDC Controller should have 1 AI, 8 DI, 2 AO, 4 DO as per IO Summary given in specification per Zone. (UPS Power Supply By Client to each DDC)	item1182	9	NO
1163	1163	AHU Mounted Coilotron UV System For Floor Mounted AHU\nSupply, installation, testing and commissioning of AHU mountable self contained and factory assembled Coilotron UV System with UL 1995 ABQK listed and UL 2043 certified, UV lamp life shall not be less than 11000 hours. Coilotron shall be installed in all floor mounted AHUs as specified herein. All the component / parts shall comply with the specification given in the tender. AHU supplier and coilotron supplier shall co-ordinate with each other regarding the fixing of the same in the AHU.\nFor 2,000 to 8,000 CFM AHU	item1183	59	NO
1164	1164	AHU Mounted Coilotron UV System For Floor Mounted AHU\nSupply, installation, testing and commissioning of AHU mountable self contained and factory assembled Coilotron UV System with UL 1995 ABQK listed and UL 2043 certified, UV lamp life shall not be less than 11000 hours. Coilotron shall be installed in all floor mounted AHUs as specified herein. All the component / parts shall comply with the specification given in the tender. AHU supplier and coilotron supplier shall co-ordinate with each other regarding the fixing of the same in the AHU.\nFor 9,000 to 20,000 CFM AHU	item1184	23	NO
1165	1165	UVGI (Ultra Voilet Germicidal Irradiation) System in Supply Duct (OT & ICU)\nSupply, installation, testing & commissioning of Duct mounted, factory assembled, UVGI system of minimum 90% kill rate with intensity of 3,000 mW-Sec/cm² per pass of air borne viruses, Covid - 19 virus, mold, spores, bacteria & odour etc. complete with all electrical components such as Ballasts, Disconnect Switch, Fuse, Hour Meter etc. in Electrical Box, UL Listed cable between Electrical Box and UVGI frame, Guide Rails and Installation Rails, Cover Plates & all necessary hardware required for installation. The complete package shall be sourced from UVGI manufacturer. The selection of UVGI shall be based on above parameters, tender specification & suitable for duct air quantity as given below:-\nFor 2,000 to 8,000 CFM Duct	item1185	33	NO
1166	1166	UVGI (Ultra Voilet Germicidal Irradiation) System in Supply Duct (OT & ICU)\nSupply, installation, testing & commissioning of Duct mounted, factory assembled, UVGI system of minimum 90% kill rate with intensity of 3,000 mW-Sec/cm² per pass of air borne viruses, Covid - 19 virus, mold, spores, bacteria & odour etc. complete with all electrical components such as Ballasts, Disconnect Switch, Fuse, Hour Meter etc. in Electrical Box, UL Listed cable between Electrical Box and UVGI frame, Guide Rails and Installation Rails, Cover Plates & all necessary hardware required for installation. The complete package shall be sourced from UVGI manufacturer. The selection of UVGI shall be based on above parameters, tender specification & suitable for duct air quantity as given below:-\nFor 9,000 to 15,000 CFM Duct	item1186	13	NO
1167	1167	Chilled / Hot / Condensate Drain Water Piping With Nitrile Rubber Insulation & Aluminium Cladding\nSupplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled / hot water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable adhesive covered with a layer of 120 gm/sq.m polythene sheet (vapour barrier) and finally applying 0.63mm aluminium sheet cladding complete with type3, grade 1 roofing feltstrip(as per IS:1322 as amended up to date) at joints complete including repairing of damage to building etc. as per specifications and as required complete in all respect.\nNote:-The Pipes of sizes 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.\n250 mm dia. (32 mm thick insulation)	item1187	160	RMT
1168	1168	Chilled / Hot / Condensate Drain Water Piping With Nitrile Rubber Insulation & Aluminium Cladding\nSupplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled / hot water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable adhesive covered with a layer of 120 gm/sq.m polythene sheet (vapour barrier) and finally applying 0.63mm aluminium sheet cladding complete with type3, grade 1 roofing feltstrip(as per IS:1322 as amended up to date) at joints complete including repairing of damage to building etc. as per specifications and as required complete in all respect.\nNote:-The Pipes of sizes 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.\n200 mm dia. (32 mm thick insulation)	item1188	270	RMT
1169	1169	Chilled / Hot / Condensate Drain Water Piping With Nitrile Rubber Insulation & Aluminium Cladding\nSupplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled / hot water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable adhesive covered with a layer of 120 gm/sq.m polythene sheet (vapour barrier) and finally applying 0.63mm aluminium sheet cladding complete with type3, grade 1 roofing feltstrip(as per IS:1322 as amended up to date) at joints complete including repairing of damage to building etc. as per specifications and as required complete in all respect.\nNote:-The Pipes of sizes 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.\n150 mm dia. (32 mm thick insulation)	item1189	500	RMT
1170	1170	Chilled / Hot / Condensate Drain Water Piping With Nitrile Rubber Insulation & Aluminium Cladding\nSupplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled / hot water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable adhesive covered with a layer of 120 gm/sq.m polythene sheet (vapour barrier) and finally applying 0.63mm aluminium sheet cladding complete with type3, grade 1 roofing feltstrip(as per IS:1322 as amended up to date) at joints complete including repairing of damage to building etc. as per specifications and as required complete in all respect.\nNote:-The Pipes of sizes 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.\n125 mm dia. (32 mm thick insulation)	item1190	580	RMT
1171	1171	Chilled / Hot / Condensate Drain Water Piping With Nitrile Rubber Insulation & Aluminium Cladding\nSupplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled / hot water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable adhesive covered with a layer of 120 gm/sq.m polythene sheet (vapour barrier) and finally applying 0.63mm aluminium sheet cladding complete with type3, grade 1 roofing feltstrip(as per IS:1322 as amended up to date) at joints complete including repairing of damage to building etc. as per specifications and as required complete in all respect.\nNote:-The Pipes of sizes 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.\n100 mm dia. (32 mm thick insulation)	item1191	1060	RMT
1172	1172	Chilled / Hot / Condensate Drain Water Piping With Nitrile Rubber Insulation & Aluminium Cladding\nSupplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled / hot water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable adhesive covered with a layer of 120 gm/sq.m polythene sheet (vapour barrier) and finally applying 0.63mm aluminium sheet cladding complete with type3, grade 1 roofing feltstrip(as per IS:1322 as amended up to date) at joints complete including repairing of damage to building etc. as per specifications and as required complete in all respect.\nNote:-The Pipes of sizes 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.\n80 mm dia. (32 mm thick insulation)	item1192	670	RMT
1173	1173	Chilled / Hot / Condensate Drain Water Piping With Nitrile Rubber Insulation & Aluminium Cladding\nSupplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled / hot water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable adhesive covered with a layer of 120 gm/sq.m polythene sheet (vapour barrier) and finally applying 0.63mm aluminium sheet cladding complete with type3, grade 1 roofing feltstrip(as per IS:1322 as amended up to date) at joints complete including repairing of damage to building etc. as per specifications and as required complete in all respect.\nNote:-The Pipes of sizes 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.\n65 mm dia. (32 mm thick insulation)	item1193	660	RMT
1174	1174	Chilled / Hot / Condensate Drain Water Piping With Nitrile Rubber Insulation & Aluminium Cladding\nSupplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled / hot water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable adhesive covered with a layer of 120 gm/sq.m polythene sheet (vapour barrier) and finally applying 0.63mm aluminium sheet cladding complete with type3, grade 1 roofing feltstrip(as per IS:1322 as amended up to date) at joints complete including repairing of damage to building etc. as per specifications and as required complete in all respect.\nNote:-The Pipes of sizes 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.\n50 mm dia. (32 mm thick insulation)	item1194	960	RMT
1175	1175	Chilled / Hot / Condensate Drain Water Piping With Nitrile Rubber Insulation & Aluminium Cladding\nSupplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled / hot water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable adhesive covered with a layer of 120 gm/sq.m polythene sheet (vapour barrier) and finally applying 0.63mm aluminium sheet cladding complete with type3, grade 1 roofing feltstrip(as per IS:1322 as amended up to date) at joints complete including repairing of damage to building etc. as per specifications and as required complete in all respect.\nNote:-The Pipes of sizes 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.\n40 mm dia. (32 mm thick insulation)	item1195	360	RMT
1176	1176	Chilled / Hot / Condensate Drain Water Piping With Nitrile Rubber Insulation & Aluminium Cladding\nSupplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled / hot water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable adhesive covered with a layer of 120 gm/sq.m polythene sheet (vapour barrier) and finally applying 0.63mm aluminium sheet cladding complete with type3, grade 1 roofing feltstrip(as per IS:1322 as amended up to date) at joints complete including repairing of damage to building etc. as per specifications and as required complete in all respect.\nNote:-The Pipes of sizes 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.\n32 mm dia. (19 mm thick insulation)	item1196	820	RMT
1177	1177	Chilled / Hot / Condensate Drain Water Piping With Nitrile Rubber Insulation & Aluminium Cladding\nSupplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled / hot water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable adhesive covered with a layer of 120 gm/sq.m polythene sheet (vapour barrier) and finally applying 0.63mm aluminium sheet cladding complete with type3, grade 1 roofing feltstrip(as per IS:1322 as amended up to date) at joints complete including repairing of damage to building etc. as per specifications and as required complete in all respect.\nNote:-The Pipes of sizes 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.\n25 mm dia. (19 mm thick insulation)	item1197	880	RMT
1178	1178	Chilled / Hot / Condensate Drain Water Piping With Nitrile Rubber Insulation & Aluminium Cladding\nSupplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled / hot water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable adhesive covered with a layer of 120 gm/sq.m polythene sheet (vapour barrier) and finally applying 0.63mm aluminium sheet cladding complete with type3, grade 1 roofing feltstrip(as per IS:1322 as amended up to date) at joints complete including repairing of damage to building etc. as per specifications and as required complete in all respect.\nNote:-The Pipes of sizes 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.\n20 mm dia. (19 mm thick insulation)	item1198	60	RMT
1179	1179	Motorised Butterfly Valves\nSupply, installation, testing and commissioning of motorised on / off butterfly valves with modulating motor in return chilled & hot water line of each chiller & Hot Water Generator operated through BMS & of following sizes. Valves shall be insulated as per pipe insulation material & thickness given above.\n200 mm dia (For Chiller)	item1199	6	NO
1180	1180	Motorised Butterfly Valves\nSupply, installation, testing and commissioning of motorised on / off butterfly valves with modulating motor in return chilled & hot water line of each chiller & Hot Water Generator operated through BMS & of following sizes. Valves shall be insulated as per pipe insulation material & thickness given above.\n80 mm dia (For Hot Water Generator)	item1200	6	NO
1181	1181	Manual Balancing Valves\nBALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified.\n200 mm dia (For Chiller)	item1201	6	NO
1182	1182	Manual Balancing Valves\nBALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified.\n80 mm dia (For Hot Water Generator)	item1202	6	NO
1183	1183	Valves & Strainer\nSupply, installation, testing and commissioning of following valves in chilled / hot water line as per specification given in the tender. Valves shall be insulated as per pipe insulation material & thickness given above.\nGlobe / Ball Valves\n19 mm dia	item1203	30	NO
1184	1184	Valves & Strainer\nSupply, installation, testing and commissioning of following valves in chilled / hot water line as per specification given in the tender. Valves shall be insulated as per pipe insulation material & thickness given above.\nGlobe / Ball Valves\n25 mm dia	item1204	117	NO
1185	1185	Valves & Strainer\nSupply, installation, testing and commissioning of following valves in chilled / hot water line as per specification given in the tender. Valves shall be insulated as per pipe insulation material & thickness given above.\nGlobe / Ball Valves\n32 mm dia	item1205	150	NO
1186	1186	Valves & Strainer\nSupply, installation, testing and commissioning of following valves in chilled / hot water line as per specification given in the tender. Valves shall be insulated as per pipe insulation material & thickness given above.\nGlobe / Ball Valves\n40 mm dia	item1206	24	NO
1187	1187	BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/ hot eater circulation as specified\n200 mm dia	item1207	28	NO
1188	1188	BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/ hot eater circulation as specified\n150 mm dia	item1208	24	NO
1189	1189	BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/ hot eater circulation as specified\n125 mm dia	item1209	4	NO
1190	1190	BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/ hot eater circulation as specified\n100 mm dia	item1210	34	NO
1191	1191	BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/ hot eater circulation as specified\n80 mm dia	item1211	54	NO
1192	1192	BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/ hot eater circulation as specified\n65 mm dia	item1212	44	NO
1193	1193	BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/ hot eater circulation as specified\n50 mm dia	item1213	102	NO
1194	1194	NON - RETURN VALVE with duel plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified.\n200 mm dia\n	item1214	9	NO
1195	1195	NON - RETURN VALVE with duel plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified.\n150 mm dia\n	item1215	5	NO
1196	1196	NON - RETURN VALVE with duel plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified.\n80 mm dia\n	item1216	6	NO
1197	1197	Y-strainer ( With Insulation )-200 mm dia	item1217	6	NO
1198	1198	Y-strainer ( With Insulation )-150 mm dia	item1218	5	NO
1199	1199	Y-strainer ( With Insulation )-100 mm dia	item1219	2	NO
1200	1200	Y-strainer ( With Insulation )-80 mm dia	item1220	18	NO
1201	1201	Y-strainer ( With Insulation )-65 mm dia	item1221	13	NO
1202	1202	Y-strainer ( With Insulation )-50 mm dia	item1222	57	NO
1203	1203	Y-strainer ( With Insulation )-40 mm dia	item1223	37	NO
1204	1204	Y-strainer ( With Insulation )-32 mm dia	item1224	34	NO
1205	1205	Y-strainer ( With Insulation )-25 mm dia	item1225	9	NO
1206	1206	Thermometer\nProviding & fixing in position the mercury in glass industrial type thermometers.	item1226	186	NO
1207	1207	Auto Air Vent\nSupply, installation, testing and commissioning of auto air vent valve of following sizes and complying with tender specification.\na) 10 mm dia auto air vent valve	item1227	120	NO
1208	1208	Burried Chilled / Hot Water Piping With TF Quality Expanded Polysterene Insulation & Sand Cement Plaster\nSupplying, laying / fixing, testing and commissioning of following nominal sizes of chilled / hot water piping outside the building laid in the ground including earth excavation & filling as required (with necessary clamps and fittings but excluding valves, strainers, gauges etc.) duly insulated with following thickness TF Quality Expanded Polysterene of minimum 20 Kg / m3 density, thermal conductivity 0.035 (K.cal/ hr. degree C/m or better at 10 deg mean temperature covered with 500 gauge polythene faced hessian with 50 mm overlap, All joints sealed with bitumen, A layer of 0.50 mm x 20 mm G.I. wire mesh netting provided over it butting all joints and laced down with GI wire, sand cement plaster (1:4) 20 mm. thick provided in 2 layers of each 10mm and water proofed by applying hot bitumen & fixing tar felt over the plaster as per specifications and as required complete in all respect.\n\nNote:-The Pipes of sizes 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.\n150 mm dia. (75 mm thick insulation)	item1228	230	RMT
1209	1209	Condenser Water Piping\nSupplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends, tees etc..but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect.\n\nNote:-The Pipes size 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.\n50 mm dia pipe	item1229	100	RMT
1210	1210	Condenser Water Piping\nSupplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends, tees etc..but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect.\n\nNote:-The Pipes size 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.\n250 mm dia pipe	item1230	150	RMT
1211	1211	Condenser Water Piping\nSupplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends, tees etc..but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect.\n\nNote:-The Pipes size 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.\n300 mm dia pipe	item1231	380	RMT
1212	1212	Motorised Butterfly Valves\nSupplying, fixing, testing and commissioning of following sizes Motorized Butterfly Valve with CI Body, SS Disc, O - ring and minimum PN-16 pressure rating, conforming to BS 5155, IS 13095, with IP-55 actuator, capable of accepting upto 10V DC , and upto 20 mA electric signal and providing similar transduced feedback output to control system as required.\n250 mm dia (For Condenser Out, Cooling Tower In & Out)	item1232	18	NO
1213	1213	Manual Balancing Valves\nSupply, installation, testing and commissioning of manual balancing valves in return chilled and condenser water line of each chiller, condenser and cooling tower as per tender specification & of following sizes:\n250 mm dia (For Condenser Out, Cooling Tower In)	item1233	12	NO
1214	1214	Valves & Strainer\nSupply, installation, testing and commissioning of following valves in chilled / condenser water line as per specification given in the tender.\nBUTTERFLY VALVE (MANUAL) with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified.\n250 mm dia	item1234	36	NO
1215	1215	Valves & Strainer\nSupply, installation, testing and commissioning of following valves in chilled / condenser water line as per specification given in the tender.\nBUTTERFLY VALVE (MANUAL) with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified.\n300 mm dia	item1235	6	NO
1216	1216	NON - RETURN VALVE with dual plate of CI body SS plates\nvulcanized NBR seal flanged end & PN 16 pressure rating as specified.\n250 mm dia\n	item1236	6	NO
1217	1217	Pot Strainer\nSupply, installation, testing and commissioning of PN 16 rating Pot - Strainer of the following sizes confirming to tender specification.\na) 300 mm dia	item1237	2	NO
1218	1218	Thermometer\nProviding & fixing in position the mercury in glass industrial type thermometers.	item1238	12	NO
1219	1219	Rectangular GI Ducting (Factory Made - L Shape)\nSupply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.\n24 G (Up To 750 mm)	item1239	6860	SMT
1220	1220	Rectangular GI Ducting (Factory Made - L Shape)\nSupply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.\n22 G (751 to 1500 mm)	item1240	8720	SMT
1221	1221	Rectangular GI Ducting (Factory Made - L Shape)\nSupply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.\n20 G (1501 to 2250 mm)	item1241	2455	SMT
1222	1222	Rectangular GI Ducting (Factory Made - L Shape)\nSupply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.\n18 G (Above 2250 mm)	item1242	520	SMT
1223	1223	Site Fabricated GI Ducting\nSupply, installation, balancing and commissioning of site fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required\n24 G (Up To 750 mm)	item1243	1050	SMT
1224	1224	Site Fabricated GI Ducting\nSupply, installation, balancing and commissioning of site fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required\n22 G (Up To 750 mm)	item1244	1240	SMT
1225	1225	Site Fabricated GI Ducting\nSupply, installation, balancing and commissioning of site fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required\n20 G (Up To 750 mm)	item1245	360	SMT
1226	1226	Site Fabricated GI Ducting\nSupply, installation, balancing and commissioning of site fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required\n18 G (Up To 750 mm)	item1246	260	SMT
1227	1227	Site Fabricated Aluminium Ducting\nSupply, fabrication, installation & testing of Aluminium sheet metal ducting duly polysulphide sealed complete with Spliter Damper, vanes etc. as required for OT and as per ISI specifications and as per approved shop drawings.\n22 G	item1247	2000	SMT
1228	1228	Site Fabricated Aluminium Ducting\nSupply, fabrication, installation & testing of Aluminium sheet metal ducting duly polysulphide sealed complete with Spliter Damper, vanes etc. as required for OT and as per ISI specifications and as per approved shop drawings.\n20 G	item1248	2200	SMT
1229	1229	Duct Accoustic Lining\nSupply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications.	item1249	1170	SMT
1230	1230	Duct Insulation\nSupplying and fixing of external thermal insulation on ducts with EPDM Rubber foam with completely closed cell structure as per specifications - Density 40-60 kg /cum , Class A as per ASTM E 84 , Class V-0 as per UL 94 and Mu value > 7000, tape & adhesive (pidilite SR -998) as required of following thickness.\n13mm	item1250	9165	SMT
1231	1231	Fire Dampers & Actuator\nSupplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications.\nFire Damper	item1251	79	SMT
1232	1232	Fire Dampers & Actuator\nSupplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications.\nActuator	item1252	155	SMT
1233	1233	Grilles, Diffusers, VCD\nSupply, installtion and testing of Powder coated Aluminium extruded grills / diffusers as per specifications given in tender and of following sizes.\nSupplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.	item1253	155	SMT
1234	1234	Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.	item1254	155	SMT
1235	1235	Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.	item1255	140	SMT
1236	1236	Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.	item1256	140	SMT
1237	1237	Fresh / Exhaust air louvers with bird screen & damper	item1257	38	SMT
1238	1238	Volume control GI Dampers to be provided in supply & Exhaust air registers / terminals.	item1258	100	SMT
1239	1239	Fixed bar linear air register of following sizes\n100 mm	item1259	270	RMT
1240	1240	Fixed bar linear air register of following sizes\n150 mm	item1260	960	RMT
1241	1241	Fixed bar linear air register of following sizes\n200 mm	item1261	160	RMT
1242	1242	Slot linear air diffusers of following sizes:\n2 Slot	item1262	55	RMT
1243	1243	Slot linear air diffusers of following sizes:\n3 Slot	item1263	120	RMT
1244	1244	GSS Duct Damper\nSupply, installation and testing of multiblade box type Galvanized Sheet Steel construction damper for ducts to be provided with suitable links and quadrants for control of volume of air.	item1264	170	SMT
1245	1245	Acoustic Insulation of AC Plant Room & AHU\nSupplying, fixing acoustic lining on wall and ceiling of AC Plant Room & AHU Room with 50 mm thick, density 32 kg/cu.m resin bonded glass fiber insulation friction fixed in 610 mm x 610 mm frame work made of 25X50X50X50X25 mm made out of 0.6mm thick GI sheet U shaped channel and covered with reinforced fiber glass tissue and finished with 0.80 mm perforated aluminium sheet etc. complete as required and as per specifications.	item1265	2480	SMT
1246	1246	Main AC Panel Supply, installation, testing and commissioning of Cubical type sectinalised floor standing switch board by CPRI apprved firms of 31 MVA fault capacity at 415 V complete with 4 strip, 1000 A capacity Aluminium Bus - Bar Electrolytic grade E-91, cable alley, switchgears suitable for AC-23 duty & of following capacity & as per specification given in the tenderA).a) Incomer 800 A 4 Pole ACB with overload, short ckt., earth fault, protection release, with 144 mm (0 -800 A) ammeter with 3 CT and selector switch, 144 mm (0 - 500 V) Voltmeter with selector switch, phase indication light with protection fuse, on / off / trip indicating light with protection fuse.SET 02 b) Bus Coupler Bus Coupler for section A, B & standby chiller of 800 A capacity, four pole ACB.SET 02 c) Incomer and bus coupler shall be mechanically & electrically interlocked to avoid paralleling of the two supplies. LOT B Outgoings a) For 3 Nos. Water-cooled Chiller (2W+1S) 630 A 4 Pole MCCB with overload, short circuit & earth fault protection with (0 - 630A) ammeter with three CT & selector switch, on / off indication light with protection fuses. SET - 03 b) For 3 Nos. HW Generator (2W+1S) 250 A 4 Pole MCCB. SET - 03 c) For 3 Nos. 12.5 / 15 HP Pr. CHW Pumps for Chiller (2W+1S) 63 A TPN MCB with 25 A star delta starter, overload relay, start/stop push buttons, ammeter (0-60A) with three CT & selector switch, on/off/trip indication lights with SP MCB, single phase preventer & auto / manual mode selector switch. SET - 05 d) For 3 Nos. 40 HP CDW Pumps for Chiller (2W+1S) 125 A 4 Pole MCCB with 45 A star delta starter, overload relay, start / stop push buttons, ammeter (0-125A) with three CT & selector switch, on/off/trip indication lights with SP MCB, single phase preventer & auto / manual mode selector switch. SET-03 e) For Hospital & MC - 8 Nos. 15 HP Sr. CHW Pumps, Cooling Tower Fans, 3 Nos. HW Pumps 40 A TPN MCB SET- 11	item1266	2	Set
1247	1247	Electrical Sub Panel for AHU / FAN / AWS / Scrubber\nSupply, installation, testing and commissioning of Cubical wall mounted type switch board as detailed below & switch gears suitable for AC - 23 duty including making interconnection etc as required. BMS compitable electronic KWH meter shall have been taken in main electrical work therefore same shall not be part of followings sub panel. Note: AHU for Hospital has VFD starter.\nFor Vent Fan Motor Up to 3.73 Kw\n40 A TPN MCB with 9 / 12 / 16 A DOL starter, overload relay, start / stop push buttons, phase indication lights with protection fuse, on / off / trip indication lights with protection fuse, single phase preventer & auto / manual mode selector switch. Set - 01\nControls & interlocking accessories as required. Lot	item1267	59	NO
1248	1248	For Vent Fan Motor of 5.6 Kw\n40 A TPN MCB with 25 A DOL starter, overload relay, start / stop push buttons, phase indication lights with protection fuse, on / off / trip indication lights with protection fuse, single phase preventer & auto / manual mode selector switch. SET-01\nControls & interlocking accessories as required. Lot	item1268	27	NO
1249	1249	For Vent Fan Motor of 7.5 Kw\n40 A TPN MCB with 16 A Star Delta starter, overload relay, start / stop push buttons, phase indication lights with protection fuse, on / off / trip indication lights with protection fuse, single phase preventer & auto / manual mode selector switch. SET-01\nControls & interlocking accessories as required. Lot	item1269	17	NO
1250	1250	For Vent Fan Motor of 9.3 / 11 Kw\n63 A TPN MCB with 25 A Star Delta starter, overload relay, start / stop push buttons, phase indication lights with protection fuse, on / off / trip indication lights with protection fuse, single phase preventer & auto / manual mode selector switch. SET-01\nControls & interlocking accessories as required. Lot	item1270	10	NO
1251	1251	For Vent Fan Motor of 15 / 18.5 Kw\n63 A TPN MCB with 32 A Star Delta starter, overload relay, start / stop push buttons, phase indication lights with protection fuse, on / off / trip indication lights with protection fuse, single phase preventer & auto / manual mode selector switch. SET-01\nControls & interlocking accessories as required. Lot	item1271	8	NO
1252	1252	For Fan Motor, 1 x 5.5 Kw Air Washer + 1 x 3.7 Kw Fan For Laundry Ventilation\nSupply, installation, testing and commissioning of Cubical type sectinalised floor standing switch board by CPRI apprved firms of 18 MVA fault capacity at 415 V complete with 4 strip, 100 A capacity Aluminium Bus - Bar Electrolytic grade E-91, cable alley, switchgears suitable for AC-23 duty & of following capacity & as per specification given in the tender.\nIncomer :\n63 A TPN MCB with (0-63A) ammeter with three CT and selector switch, (0 - 500 V) voltmeter with selector switch, phase indication light with protection fuse. SET-01\nOutgoing\na) For Air-washer Fan Motor of 5.5 Kw 32 A TPN MCB with 25 A DOL starter, overload relay, start/stop push buttons, ammeter (0-32A) with single CT, on/off/trip indication lights with SP MCB, single phase preventer & auto / manual mode selector switch. SET-01\nb) For Fan Motor of 3.7 Kw\n32 A TPN MCB with 16 A DOL starter, overload relay, start/stop push buttons, ammeter (0-32A) with single CT, on/off/trip indication lights with SP MCB, single phase preventer & auto / manual mode selector switch. SET-01\nc) For Air Washer Pump 16 A SP MCB, SET-1\nControls & interlocking accessories as required. Lot	item1272	2	NO
1253	1253	For Fan Motor, 1 x 9.3/11 Kw Air Washer + 1 x 15 Kw Scrubber Fan For Kitchen Ventilation\nSupply, installation, testing and commissioning of Cubical type sectinalised floor standing switch board by CPRI apprved firms of 18 MVA fault capacity at 415 V complete with 4 strip, 160 A capacity Aluminium Bus - Bar Electrolytic grade E-91, cable alley, switchgears suitable for AC-23 duty & of following capacity & as per specification given in the tender.\nIncomer\n125 A 4 Pole MCCB with (0-125A) ammeter with three CT and selector switch, (0 - 500 V) voltmeter with selector switch, phase indication light with protection with protection fuse, on / off indicating light with protection fuse. SET 01\nOutgoing\na) For Air-washer Fan Motor of 9.3 / 11 Kw\n63 A TPN MCB with 25 A star delta starter, overload relay, start/stop push buttons, ammeter (0-60A) with three CT & selector switch, on/off/trip indication lights with SP MCB, single phase preventer & auto / manual mode selector switch. SET-01\nb) For Scrubber Fan Motor of 15 Kw\n100 A 4 Pole MCCB with 32 A star delta starter, overload relay, start/stop push buttons, ammeter (0-100A) with three CT & selector switch, on/off/trip indication lights with SP MCB, single phase preventer & auto / manual mode selector switch. SET-01\nc) For Air Washer Pump\n16 A SP MCB, SET-2\nControls & interlocking accessories as required. Lot	item1273	2	NO
1254	1254	For Fan Motor, 2 x 1.5 / 2.2 / 3.7 Kw For Panel Room, STP etc\nSupply, installation, testing and commissioning of Cubical type sectinalised floor standing switch board by CPRI apprved firms of 18 MVA fault capacity at 415 V complete with 4 strip, 100 A capacity Aluminium Bus - Bar Electrolytic grade E-91, cable alley, switchgears suitable for AC-23 duty & of following capacity & as per specification given in the tender.\nIncomer\n40 A TPN MCB with (0-40A) ammeter with three CT and selector switch, (0 - 500 V) voltmeter with selector switch, phase indication light with protection fuse. SET-01\nOutgoing\na) For Fan Motor of 2 x 1.5 / 2.2 / 3.7 Kw\n32 A TPN MCB with 9 / 12 / 16 A DOL starter, overload relay, start/stop push buttons, ammeter (0-32A) with single CT, on/off/trip indication lights with SP MCB, single phase preventer & auto / manual mode selector switch. SET-02\nb) For Kitchen Air Washer Pump Only 16 A SP MCB, SET-1\nControls & interlocking accessories as required. Lot	item1274	5	NO
1255	1255	For Basement Car Parking Ventilation Fan Motor, 2 x 9.3 / 11 Kw on VFD + 2 x 9.3 / 11 Kw without VFD\nSupply, installation, testing and commissioning of Cubical type sectinalised floor standing switch board by CPRI apprved firms of 18 MVA fault capacity at 415 V complete with 4 strip, 200 A capacity Aluminium Bus - Bar Electrolytic grade E-91, cable alley, switchgears suitable for AC-23 duty & of following capacity & as per specification given in the tender.\nIncomer\n125 A TPN MCCB with (0-125A) ammeter with three CT and selector switch, (0 - 500 V) voltmeter with selector switch, phase indication light with protection fuse. SET-01\nOutgoing\na) For Fan Motor of 2 x 11 Kw on VFD SET-02\n40 A TPN MCB\nb) For Fan Motor of 2 x 11 Kw without VFD\n40 A TPN MCB with 25 A Star Delta starter, overload relay, start/stop push buttons, ammeter (0-40A) with single CT, on/off/trip indication lights with SP MCB, single phase preventer & auto / manual mode selector switch. SET-02 Controls & interlocking accessories as required. Lot	item1275	5	NO
1256	1256	For Basement Car Parking Ventilation Fan Motor, 1 x 9.3 / 11 Kw on VFD + 1 x 9.3 / 11 Kw without VFD\nSupply, installation, testing and commissioning of Cubical type sectinalised floor standing switch board by CPRI apprved firms of 18 MVA fault capacity at 415 V complete with 4 strip, 125 A capacity Aluminium Bus - Bar Electrolytic grade E-91, cable alley, switchgears suitable for AC-23 duty & of following capacity & as per specification given in the tender.\nIncomer\n100 A TPN MCCB with (0-100A) ammeter with three CT and selector switch, (0 - 500 V) voltmeter with selector switch, phase indication light with protection fuse. SET-01\nOutgoing\na) For Fan Motor of 1 x 11 Kw on VFD SET-01\n40 A TPN MCB\nb) For Fan Motor of 1 x 11 Kw without VFD\n40 A TPN MCB with 25 A Star Delta starter, overload relay, start/stop push buttons, ammeter (0-40A) with single CT, on/off/trip indication lights with SP MCB, single phase preventer & auto / manual mode selector switch. SET-01\nControls & interlocking accessories as required. Lot	item1276	4	NO
1257	1257	Single Phase MCB for FCU / Inline Fan\nSupply, Installation, testing & Commissioning of single phase MCB of following capacity:\n16 A SP MCB, SET-01	item1277	195	NO
1258	1258	Isolators\n63 A 6 pole isolator switch with sheet metal enclosure, rain protection etc. as required to suit the site condition.	item1278	23	NO
1259	1259	Isolators\n40 / 63 A 3 pole isolator switch with sheet metal enclosure, rain protection etc. as required to suit the site condition.	item1279	25	NO
1260	1260	Power Cabling\nSupply, laying, testing and commissioning of power cabling as per specification given in the tender. Power cabling of XLPE insulated Aluminium conductor armoured cables of 1.1 KV Grade including cable end termination with brass compression glands & aluminium lugs etc as per specification\nPower Cabling.\nFor Chiller (315 Kw Each)\n2 x 3.5C x 240 Sq. mm (Rate For Single Run)	item1280	280	RMT
1261	1261	Power Cabling\nSupply, laying, testing and commissioning of power cabling as per specification given in the tender. Power cabling of XLPE insulated Aluminium conductor armoured cables of 1.1 KV Grade including cable end termination with brass compression glands & aluminium lugs etc as per specification\nPower Cabling.\nFor CHW Pump, Cooling Tower Fan (20 HP Each)\n2 x 3C x 16 Sq. mm (Rate For Single Run)	item1281	1020	RMT
1262	1262	Power Cabling\nSupply, laying, testing and commissioning of power cabling as per specification given in the tender. Power cabling of XLPE insulated Aluminium conductor armoured cables of 1.1 KV Grade including cable end termination with brass compression glands & aluminium lugs etc as per specification\nPower Cabling.\nFor CDW Pump (40 HP Each)\n2 x 3C x 35 Sq. mm (Rate For Single Run)	item1282	240	RMT
1263	1263	Power Cabling\nSupply, laying, testing and commissioning of power and control cabling as per specification given in the tender. Power cabling of XLPE insulated Aluminium conductor armoured cables of 1.1 KV Grade including cable end termination with brass compression glands & aluminium lugs etc as per specification\nPower Cabling.\nFor HW Pump (5 HP Each)\n1 x 3C x 6 Sq. mm (Rate For Single Run)	item1283	70	RMT
1264	1264	Power Cabling\nSupply, laying, testing and commissioning of power cabling as per specification given in the tender. Power cabling of XLPE insulated Aluminium conductor armoured cables of 1.1 KV Grade including cable end termination with brass compression glands & aluminium lugs etc as per specification\nPower Cabling.\nFor Hot Water Generator (120 Kw Each)\n1 x 4C x 240 Sq. mm (Rate For Single Run)	item1284	120	RMT
1265	1265	Power Cabling\nSupply, laying, testing and commissioning of power cabling as per specification given in the tender. Power cabling of XLPE insulated Aluminium conductor armoured cables of 1.1 KV Grade including cable end termination with brass compression glands & aluminium lugs etc as per specification\nPower Cabling.\nFor Motor Up to 3.73 Kw\n1 x 3C x 4 Sq. mm	item1285	1120	RMT
1266	1266	Power Cabling\nSupply, laying, testing and commissioning of power cabling as per specification given in the tender. Power cabling of XLPE insulated Aluminium conductor armoured cables of 1.1 KV Grade including cable end termination with brass compression glands & aluminium lugs etc as per specification\nPower Cabling.\nFor Motor of 5.5 Kw\n1 x 3C x 6 Sq. mm	item1286	970	RMT
1267	1267	Power Cabling\nSupply, laying, testing and commissioning of power cabling as per specification given in the tender. Power cabling of XLPE insulated Aluminium conductor armoured cables of 1.1 KV Grade including cable end termination with brass compression glands & aluminium lugs etc as per specification\nPower Cabling.\nFor Motor of 7.5 to 11 Kw\n2 x 3C x 6 Sq. mm	item1287	730	RMT
1268	1268	Power & Control Cabling\nSupply, laying, testing and commissioning of power and control cabling as per specification given in the tender. Power cabling of XLPE insulated Aluminium conductor armoured cables of 1.1 KV Grade including cable end termination with brass compression glands & aluminium lugs etc as per specification\nPower Cabling.\nFor Motor of 15.0 Kw\n2 x 3C x1 6 Sq. mm	item1288	360	RMT
1269	1269	Power Cabling\nSupply, laying, testing and commissioning of power cabling as per specification given in the tender. Power cabling of XLPE insulated Aluminium conductor armoured cables of 1.1 KV Grade including cable end termination with brass compression glands & aluminium lugs etc as per specification\nPower Cabling.\nFor Motor of 18.65 Kw\n2 x 3C x 16 Sq. mm	item1289	90	RMT
1270	1270	Power Cabling\nSupply, laying, testing and commissioning of power cabling as per specification given in the tender. Power cabling of XLPE insulated Aluminium conductor armoured cables of 1.1 KV Grade including cable end termination with brass compression glands & aluminium lugs etc as per specification\nPower Cabling.\nFor Motor of 22.5 Kw\n2 x 3C x 25 Sq. mm	item1290	110	RMT
1271	1271	Power Cabling\nSupply, laying, testing and commissioning of power and control cabling as per specification given in the tender. Power cabling of XLPE insulated Aluminium conductor armoured cables of 1.1 KV Grade including cable end termination with brass compression glands & aluminium lugs etc as per specification\nPower Cabling.\nFor Inline Fan / FCU\n1 x 3C x 2.5 Sq. mm Copper	item1291	1070	RMT
1272	1272	Control Cabling\nSupply, laying, testing and commissioning of control cabling as per specification given in the tender. Power cabling of XLPE insulated Aluminium conductor armoured cables of 1.1 KV Grade including cable end termination with brass compression glands & aluminium lugs etc as per specification\nControl cabling (PVC insulated Copper conductor of 1.1 KV Grade armoured cable)\n3C x 1.5 Sq. mm	item1292	370	RMT
1273	1273	Control Cabling\nSupply, laying, testing and commissioning of control cabling as per specification given in the tender. Power cabling of XLPE insulated Aluminium conductor armoured cables of 1.1 KV Grade including cable end termination with brass compression glands & aluminium lugs etc as per specification\nControl cabling (PVC insulated Copper conductor of 1.1 KV Grade armoured cable)\n4C x 1.5 Sq. mm	item1293	870	RMT
1274	1274	Control Cabling\nSupply, laying, testing and commissioning of control cabling as per specification given in the tender. Power cabling of XLPE insulated Aluminium conductor armoured cables of 1.1 KV Grade including cable end termination with brass compression glands & aluminium lugs etc as per specification\nControl cabling (PVC insulated Copper conductor of 1.1 KV Grade armoured cable)\n5C x 1.5 Sq. mm	item1294	550	RMT
1275	1275	Earthing Strip / Wires as per specs.\nSupply & laying of 32 x 6 mm GI strip recess / surface as strip earth lead including soldering etc. as required.	item1295	180	RMT
1276	1276	Earthing Strip / Wires as per specs.\nSupply & laying of 25 x 6 mm GI strip recess / surface as strip earth lead including soldering etc. as required.	item1296	420	RMT
1277	1277	Earthing Strip / Wires as per specs.\nSupply & laying of 4 SWG GI wire or in recess for loop earthing as required.	item1297	6050	RMT
1278	1278	Earthing Strip / Wires as per specs.\nSupply & laying of 6 SWG GI wire or in recess for loop earthing as required.	item1298	3360	RMT
1279	1279	Earthing Strip / Wires as per specs.\nSupply and fixing rubber matting conforming to IS-15652-2006 complete etc. as required.	item1299	41	RMT
1280	1280	Cable Tray\nFabricating and installing following size of perforated M.S. Cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M.S. suspenders and including painting with powder coating etc as required.\n100 mm wide x 50 mm x 1.6 mm	item1300	770	RMT
1281	1281	Cable Tray\nFabricating and installing following size of perforated M.S. Cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M.S. suspenders and including painting with powder coating etc as required.\n150 mm wide x 50 mm x 1.6 mm	item1301	340	RMT
1282	1282	Cable Tray\nFabricating and installing following size of perforated M.S. Cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M.S. suspenders and including painting with powder coating etc as required.\n300 mm wide x 50 mm x 1.6 mm	item1302	340	RMT
1283	1283	Cable Tray\nFabricating and installing following size of perforated M.S. Cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M.S. suspenders and including painting with powder coating etc as required.\n450 mm wide x 50 mm x 2 mm	item1303	180	RMT
1284	1284	Cable Tray\nFabricating and installing following size of perforated M.S. Cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M.S. suspenders and including painting with powder coating etc as required.\n600 mm wide x 50 mm x 2 mm	item1304	220	RMT
1285	1285	Junction Box For FCU / Propeller / Inline Fan etc (Single Phase)\nSupply, Installation, Testing & Commissioning of 4\" x 3\" x 3\" G.I. Box with modular type 6A socket & switch, modular cover plate etc as required at site.	item1305	280	Set
1286	1286	Starter for Propeller / Inline fan (Single Phase)\nSupply, Installation, Testing & Commissioning of modular type single phase motor starter up to 6A (Rating shall be as per motor) including 3\" x 3\" x 2.5\" G.I. Box with modular, modular cover plate, conduiting and wiring from starter to fan etc as required at site\nNOTE:\nThe AC contractor shall provide fire shunt relay contact in his panel wherever necessary along with auto / manual mode selector switch in the outgoing feeder for AHU Fan, Ventilation & Pressurization fan etc. to take fire input signal (Potential Free Contact). Cost shall be included in the panel price quoted by him.	item1306	170	Set
1287	1287	All the items listed below shall include supply, installation, testing & commissioning.\nSoftware and Operator Workstation\nHost PC comprising core i7 processor or later, 3 GHz, 8.0 GB RAM, 1 TB HDD, DVD drive, 6 nos. USB Port, 18.5\" SVGA color flat TFT monitor, keyboard, mouse and pre-loaded windows 8 operating system and anti virus software, Laserjet printer (A4 size, B/W)	item1307	2	Job
1288	1288	Supply, installation, testing & commissioning of the following Web Based graphical Software. Providing facilities to create static & animate the graphics, navigation between the pages, display of logs, changing the time zones, popup alarms with single user license & point capacity as per I-O Summary with 20% spare points configurable password protection for the system and should be able to communicate with BACnet/M-BUS/LONWORK & MODBUS devices simultaneously. This software will act as web server & no additional license should require at client side.\nApplication Software for Building Automation System having facility to to exchange information using SQL database. Software shall have the features to calculate the total power consumption, total refrigeration load consumed on every day etc. Critical alarms generated in a day and its status should also be mailed along with daily report.	item1308	2	Job
1289	1289	Supervisory Controllers\nNetwork Area / Supervisory Controller for Building Management System (BMS). Network Area Controller Shall support Communication with AC Plant Controllers (DDC controllers) & Other Application Controllers on BACnet, Shall support Communication with Integrator Units as defined below on BACnet / MODBUS / LONWORKS. Router must be compliant with ANSI / ASHRAE 135-2012 (Rev. 1.10)	item1309	2	Job
1290	1290	Direct Digital Controllers (BACNET / LON Type)\nStand alone, intelligent, UL Listed, BTL listed & BTL tested, ANSI / ASHRAE approved Interoperable DDC as per the specifications. All the Controllers shall be UL / BTL tested & CE certified. Each controllers shall be equipped with Universal Inputs with a maximum polling speed of 100 ms. DDC Controller shall have a resident real time clock with a battery back up. DDC must support trending & scheduling at Controller level.The controller shall be housed in a vandal proof, lockable and secure MS cabinets to be supplied along with controllers. DDC must match BACnet profile B-BC (Building Controller) / B-AAC Profile as per BTL listing. The controller shall have 15% Extra IO capacity.\nEach of the following systems shall have seperate multiple controllers, as required. The DDC selection shall be based on I-O Summary as given in the tender.\nFor Chilled water system - Chillers, CHW & CDW Pumps, Cooling Towers, HWG, HW Pumps & Headers etc. as required.	item1310	2	Job
1291	1291	Direct Digital Controllers (BACNET / LON Type)\nStand alone, intelligent, UL Listed, BTL listed & BTL tested, ANSI / ASHRAE approved Interoperable DDC as per the specifications. All the Controllers shall be UL / BTL tested & CE certified. Each controllers shall be equipped with Universal Inputs with a maximum polling speed of 100 ms. DDC Controller shall have a resident real time clock with a battery back up. DDC must support trending & scheduling at Controller level.The controller shall be housed in a vandal proof, lockable and secure MS cabinets to be supplied along with controllers. DDC must match BACnet profile B-BC (Building Controller) / B-AAC Profile as per BTL listing. The controller shall have 15% Extra IO capacity.\nEach of the following systems shall have seperate multiple controllers, as required. The DDC selection shall be based on I-O Summary as given in the tender.\nFor Air Handling Units (Category A) as per IO Summary as required. (2 Nos. AHU with 1 No. DDC) .	item1311	59	NO
1292	1292	Direct Digital Controllers (BACNET / LON Type)\nStand alone, intelligent, UL Listed, BTL listed & BTL tested, ANSI / ASHRAE approved Interoperable DDC as per the specifications. All the Controllers shall be UL / BTL tested & CE certified. Each controllers shall be equipped with Universal Inputs with a maximum polling speed of 100 ms. DDC Controller shall have a resident real time clock with a battery back up. DDC must support trending & scheduling at Controller level.The controller shall be housed in a vandal proof, lockable and secure MS cabinets to be supplied along with controllers. DDC must match BACnet profile B-BC (Building Controller) / B-AAC Profile as per BTL listing. The controller shall have 15% Extra IO capacity.\nEach of the following systems shall have seperate multiple controllers, as required. The DDC selection shall be based on I-O Summary as given in the tender.\nFor All 3 Phase Fans - Fresh Air / Exhaust Air Fan, Airwasher, Scrubber, Pressurisation Fan etc. as required. (4 No. Fans with 1 No. DDC)	item1312	31	NO
1293	1293	Direct Digital Controllers (BACNET / LON Type)\nStand alone, intelligent, UL Listed, BTL listed & BTL tested, ANSI / ASHRAE approved Interoperable DDC as per the specifications. All the Controllers shall be UL / BTL tested & CE certified. Each controllers shall be equipped with Universal Inputs with a maximum polling speed of 100 ms. DDC Controller shall have a resident real time clock with a battery back up. DDC must support trending & scheduling at Controller level.The controller shall be housed in a vandal proof, lockable and secure MS cabinets to be supplied along with controllers. DDC must match BACnet profile B-BC (Building Controller) / B-AAC Profile as per BTL listing. The controller shall have 15% Extra IO capacity.\nEach of the following systems shall have seperate multiple controllers, as required. The DDC selection shall be based on I-O Summary as given in the tender.\nFor Lift Well, Lift Lobby & Staicase Pressurisation Fans (4 Nos. Fans with 1 No. DDC)	item1313	7	NO
1294	1294	Field instruments As Per I-O Summary\nImmersion Temperature sensor with thermowell for Chilled water system (3 Nos. Chiller Outlet, 2 Nos. Chilled Water Header, 1 No. Condenser Water Return Header, 2 Nos. Hot Water Generator Outlet, 2 Nos. Hot Water Header)\n	item1314	20	NO
1295	1295	Field instruments As Per I-O Summary\nAmbient air temperature and humidity sensor\n	item1315	2	NO
1296	1296	Field instruments As Per I-O Summary\nCurrent relay for pumps (3 Nos. Primary CHW Pumps, 3 Nos. CDW Pumps, Excluding Pumps on VFD)\n	item1316	12	NO
1297	1297	Field instruments As Per I-O Summary\nDifferential pressure switch for various vent. fans excluding Inline & Propeller Fans	item1317	102	NO
1298	1298	Field instruments As Per I-O Summary\nDifferential pressure switch for AHU blower status	item1318	98	NO
1299	1299	Field instruments As Per I-O Summary\nDifferential pressure switch AHU Pre, Fine & Hepa Filter status	item1319	150	NO
1300	1300	Field instruments As Per I-O Summary\nTemperature sensor for return temperature monitoring (Common for cooling / heating)	item1320	150	NO
1301	1301	Integrators for third party systems on BACnet/MODBUS/LONWORKS/OPC/M-BUS and other industry standard Open protocols for the following Third Party Systems. Integrator should have dedicated one Lon, RS-485 & RS-232 Port with minimum of 96 MB storage.Integrator should be able to store trending to ensure gap free storage.The Third Party Integrator should be from the same manufacturer as that of DDC. Chillers on BACnet/MODbus/LONworks Variable Frequency Drives on BACnet/MSTP, MODBUS-RTU Over RS-485	item1321	2	NO
1302	1302	Cabling and Conduiting\nCommunication & Signal Cabling 2C x 1.5 Sq. mm Shielded Tinned Copper Cable.	item1322	24200	RMT
1303	1303	Cabling and Conduiting\nMS Conduit 25 mm for Signal & Communication Cable	item1323	18100	RMT
1304	1304	Hi-wall Split Unit\nSupplying with installation testing and commissioning of Hi -- wall 3 STAR rating non ducted split type air conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection up to 5 m between the room unit and out door unit as approved by the Deptt.) and as directed by the department.\n1.5 TR	item1324	43	NO
1305	1305	Hi-wall Split Unit\nSupplying with installation testing and commissioning of Hi -- wall 3 STAR rating non ducted split type air conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection up to 5 m between the room unit and out door unit as approved by the Deptt.) and as directed by the department.\n2.0 TR	item1325	17	NO
1306	1306	Ceiling Suspended Ductable Split Unit\nSupply, installation, testing & commissioning of Air cooled Ceiling Suspended Ductable Split type Air conditioners of following capacities suitable for refrigerant R22/R407C with outdoor unit consisting of hermetically sealed imported power efficient Scroll compressors, condenser coil and condenser fan and indoor unit consisting of evaporating coil, blower fan, motor & filter. Both cooling coil & condenser coil will be made up of copper-internally grooved with slit fins, anti corrosion blue fins along. The control system shall be microprocessor bases with following safety inbuilt: HP/LP cut-out, SPPR (protection against single phasing & reverse polarity) In-built thermal/temperature protection. Microprocessor controller is provided with following features: Auto switch on or off of compressors\nmemory back up of settings\nAuto restart after power failure\nRuntime equalisation of the compressors\nBuilt-in time delay to protect compressors\nFault diagnostics to facilities speedy correction\nThe cost of the machines will also include 20G hard drawn copper refrigerant piping properly saddles using wall spacers CPVC condensate drain piping including U Trap properly saddled, ( Fire Retardant Canvas Cloth duct connection as approved by the Deptt., ( Electrical interconnection as approved by the Deptt.)between IDU & ODU using ISI marked cables in 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit properly saddled, ( Nitrogen pressure testing of refrigerant circuit, ( Refrigerant Gas Charging ensuring optimum performance, etc complete in all respects \"make)s Approved Bluestar, Voltas, Carrier, Hitachi, Daikin, Mitsubishi.\n5.8 TR	item1326	8	NO
1307	1307	Ceiling Suspended Ductable Split Unit\nSupply, installation, testing & commissioning of Air cooled Ceiling Suspended Ductable Split type Air conditioners of following capacities suitable for refrigerant R22/R407C with outdoor unit consisting of hermetically sealed imported power efficient Scroll compressors, condenser coil and condenser fan and indoor unit consisting of evaporating coil, blower fan, motor & filter. Both cooling coil & condenser coil will be made up of copper-internally grooved with slit fins, anti corrosion blue fins along. The control system shall be microprocessor bases with following safety inbuilt: HP/LP cut-out, SPPR (protection against single phasing & reverse polarity) In-built thermal/temperature protection. Microprocessor controller is provided with following features: Auto switch on or off of compressors\nmemory back up of settings\nAuto restart after power failure\nRuntime equalisation of the compressors\nBuilt-in time delay to protect compressors\nFault diagnostics to facilities speedy correction\nThe cost of the machines will also include 20G hard drawn copper refrigerant piping properly saddles using wall spacers CPVC condensate drain piping including U Trap properly saddled, ( Fire Retardant Canvas Cloth duct connection as approved by the Deptt., ( Electrical interconnection as approved by the Deptt.)between IDU & ODU using ISI marked cables in 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit properly saddled, ( Nitrogen pressure testing of refrigerant circuit, ( Refrigerant Gas Charging ensuring optimum performance, etc complete in all respects \"make)s Approved Bluestar, Voltas, Carrier, Hitachi, Daikin, Mitsubishi.\n16.6 TR	item1327	4	NO
1308	1308	Refrigerant Piping, Cabling, Insulation\nSupplying fitting fixing and connection as approved by the Deptt.)1/2 inch & 3/4 inch copper piping with insulation along with connection as approved by the Deptt.)cable including testing and commissioning as directed by the department.	item1328	965	NO
1309	1309	NON- MEDICAL EQUIPMENT\nMOT comprising of walls & ceiling system for operating area, steel framework, static dissipative flooring, laminar flow, double dome OT light, touch screen surgeon’s control panel, scrub station, X ray viewing screen, hatch box, automatic sliding doors, anesthesia pendent, surgeon pendent etc.\nWith stainless steel technology	item1329	24	per OT
1310	1310	Medical Gas pipeline system (as per international standards) comprising of oxygen, carbon dioxide, nitrous oxide, AGSS, Air-4, Air-7, Vacuum outlets, manifolds, pressure alarms, fully automatic gas control system, Bed head panels, copper piping, cylinder banks, plant equipment such as compressors, Vacuum pumps etc.	item1330	1296	per bed
1311	1311	Sterilizer for CSSD Double Door with Generator 550 liters Vertical Sliding door	item1331	2	Each
1312	1312	Sterilizer for CSSD Double Door with Generator 1000 liters Horizontal sliding door	item1332	2	Each
1313	1313	Washer Disinfector\nModel Tiva10-2M 265 liters12 DIN Basket 2door TUTTNAUER	item1333	4	Each
1314	1314	Sterilizer 1 door with Steam Generator 160 Liters\nModel 5075 HSG-1A TUTTNAUER	item1334	2	Each
1315	1315	Plasma Sterilizer PM 100 Chamber volume:100 Liters	item1335	2	Each
1316	1316	Drying Cabinet 360Liters DRY	item1336	2	Each
1317	1317	Automatic Ultra sonic Cleaner	item1337	2	Each
1318	1318	SPRAY GUN RINSER	item1338	2	Each
1319	1319	HEAT SEALING MACHINE	item1339	4	Each
1320	1320	STAINLESS STEEL PASS BOX	item1340	6	Each
1321	1321	Control & Packaging Table with two shelves	item1341	4	Each
1322	1322	Stainless Steel Work Table With Double Sink	item1342	2	Each
1323	1323	Stainless Steel work table with under shelf	item1343	8	Each
1324	1324	SS BASKET RACKS	item1344	4	Each
1325	1325	Closed transport trolley	item1345	8	Each
1326	1326	SS Storage Rack With Five Shelves	item1346	8	Each
1327	1327	SS Full size Wire Basket Modular	item1347	80	Each
1328	1328	SS Half size Wire Basket Modular	item1348	80	Each
1329	1329	Sterilizer 1 door with Steam Generator 160 Liters	item1349	4	Each
1330	1330	Washer Disinfector	item1350	2	Each
1331	1331	Automatic Ultra sonic\nCleaner -45L	item1351	2	Each
1332	1332	HEAT SEALING MACHINE	item1352	2	Each
1333	1333	LAUNDRY (500 Bedded Hospital)\nAs per Technical Specification\nBarrier Washer Extractor, Steam Heated, 50 Kg. Capacity - 2 No's\nDrying Tumbler, Steam Heated, 30 Kg. Capacity - 2 No's\nBarrier Washer Extractor, Steam Heated 18 Kg. Capacity - 1 No\nDrying Tumbler, Steam Heated, 15 Kg. Capacity - 1 No\n\"Flat Work Ironer (Roller Heated) (Single Roller) Size : Dia 800 x Depth 3000 MM\" - 1 No\n\"Vacuum Ironing Table Size : 1250 x 750 MM\" - 4 No's\n\"General Utility Press, Steam Heated Size of Bed : 350 x 1190 MM\"- 1 No.\nMobile Table, Size : 10'x2.5' - 2 No's\nMobile Table, Size : 4'x2.5' - 1 No's\nDry Linen Trolley-Cage Type, 50 Kg. Capacity - 4 No's\nWet Linen Trolley- Box Type, 50 Kg. Capacity - 4 No's\nScrubbing Station (Double Sink) - 1 No\nShelf Trolley-Transportation , 100 Kg. Capacity - 4 No's\nDiesel Fired Steam Boiler, 1000 Kg. Capacity - 1 No.\nAir Compressor 5 HP Capacity - 1 No.\n	item1353	1	Job
1334	1334	LAUNDRY (800 Bedded Hospital)\nAs per Technical Specification\nBarrier Washer Extractor, Steam Heated, 50 Kg. Capacity - 3 No's\nBarrier Washer Extractor, Steam Heated, 28 Kg. Capacity - 1 No.\nDrying Tumbler, Steam Heated, 60 Kg. Capacity - 1 No.\nDrying Tumbler, Steam Heated, 30 Kg. Capacity - 2 No's\nBarrier Washer Extractor, Steam Heated 18 Kg. Capacity - 1 No\nDrying Tumbler, Steam Heated, 15 Kg. Capacity - 1 No\n\"Flat Work Ironer (Roller Heated) (Double Roller) Size : Dia 800 x Depth 3000 MM\" - 1 No\n\"Vacuum Ironing Table Size : 1250 x 750 MM\" - 6 No's\n\"Flat Bed Press, Steam Heated Size of Bed : 750 x 1500 MM\"- 1 No.\n\"General Utility Press, Steam Heated Size of Bed : 350 x 1190 MM\"- 1 No.\nMobile Table, Size : 10'x2.5' - 2 No's\nMobile Table, Size : 4'x2.5' - 2 No's\nDry Linen Trolley-Cage Type, 50 Kg. Capacity - 6 No's\nWet Linen Trolley- Box Type, 50 Kg. Capacity - 6 No's\nScrubbing Station (Double Sink) - 1 No\nShelf Trolley-Transportation , 100 Kg. Capacity - 5 No's\nDiesel Fired Steam Boiler, 1000 Kg. Capacity - 1 No.\nAir Compressor 5 HP Capacity - 1 No.\n	item1354	1	Job
1335	1335	MILK BOILER -Cap.100Ltrs.\nS.S.Sheet insulated body with triple jacket. The water jacket will be fitted with 2 Kw heating element. Milk outlet, water level indicator & draw off valve at the bottom & water tank. element, Elcon thermostat, GVC rotary switch, LED indicator for Power, 4mm thickness 3 core wire\nS.S.Sheet insulated body with triple jacket. The water jacket will be fitted with 2 Kw heating element. Milk outlet, water level indicator & draw off valve at the bottom & water tank. element, Elcon thermostat, GVC rotary switch, LED indicator for Power, 4mm thickness 3 core wire	item1355	2	No.
1336	1336	TEA BOILER - Cap.100Ltrs.\nS.S.Sheet insulated body with triple jacket. The water jacket will be fitted with 2 Kw heating element. Milk outlet, water level indicator & draw off valve at the bottom & water tank. element, Elcon thermostat, GVC rotary switch, LED indicator for Power, 4mm thickness 3 core wire	item1356	2	No.
1337	1337	MICROWAVE OVEN - Cap.20-30Ltrs.\n	item1357	2	No.
1338	1338	PICK UP COUNTER WITH OVERSHELF - Size 1800X600X850+300\nTop 3 sides, under & over shelf of s.s.sheet, on m.s.angle & s.s.tubular legs frame work. The counter will have 3 sides fully covered, operator side open. With one under shelf. One over shelf 300mm wide & running along the full length of counter u type heating element of 1 Kw is placed under the one head shelf to keep the dishes warm provided with toggle switch also connected with 4 mm 3 core wire.	item1358	4	Nos.
1339	1339	WORK TABLE FOR SUPPORT OF TWO BURNER RANGE - Size 1350x600x850mm\nTop & undershelf of s.s.sheet on m.s.anlge frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required.	item1359	2	No.
1340	1340	TWO BURNER COOKING RANGE - App. Size 1200X600X850mm\nFrame work of m.s.anlge duly painted, mounted on s.steel tubular legs with adjustable feet. Top & sides & under shelf of s.s.sheet. The range will be complete with 2nos. Hy-pressure gas burners with individual control valves. Cast iron pan support	item1360	2	No.
1341	1341	For Comunity Kitchen\nTWO BURNER COOKING RANGE - App. Size 1200X600X850mm\nFrame work of m.s.anlge duly painted, mounted on s.steel tubular legs with adjustable feet. Top & sides & under shelf of s.s.sheet. The range will be complete with 2nos. Hy-pressure gas burners with individual control valves. Cast iron pan support	item1361	6	No.
1342	1342	EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) FOR TWO BURNER RANGE - Size 1950x750x600mm\nMade of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.	item1362	2	No.
1343	1343	JUICER (table top model)\nCast Aluminum/CI body, duly polished / painted, with worm & perforated insert. Top feeding tray. Worm easily cleanable fitted with 1/2HP elect. motor.	item1363	2	No.
1344	1344	CONVEYOR TOASTER - App. Cap. 100-125 Toasts/hr.\nS.S.Sheet body, having s.s.sheet conveyor belt. App.225mm wide. The unit will have heating elements on top & lower portion of conveyor belt with variable heat & speed control switch. (MADE IN ITALY)	item1364	2	No.
1345	1345	WORK TABLE WITH SINK FOR JUICER STATION - Size 1800x750x850+150\nTop & Sink bowl of s.s.sheet, on s.s.anlge & s.s.tubular frame work with cross bracing at lower portion. Sink bowl will be integrally welded with top & grinded smooth. Sink bowl size 450x450x250mm.	item1365	2	No.
1346	1346	WORK TABLE WITH SINK FOR IDLY STEAMER - Size 1950x600x850+150\nTop & Sink bowl of s.s.sheet, on s.s.anlge & s.s.tubular frame work with cross bracing at lower portion. Sink bowl will be integrally welded with top & grinded smooth. Sink bowl size 450x450x250mm.	item1366	2	No.
1347	1347	UNDER COUNTER REFRIGERATOR WITH PICK UP SHELF - Size 1200x600x850+450+300\nDouble walled 'PUF' insulated s.s.sheet outer & inner body of s.s.sheet 0.8mm thick having hinged doors with rubber gascuts. Inside s.s.wire shelves on adjustable channel frame complete with 'Kirloskar/Tecumesh' make compressor. Having condensor,	item1367	2	No.
1348	1348	FOUR DOOR REFRIGERATOR - App. Size 1200x675x2000mm\nDouble walled, insulated 'PUF' body made of 0.8mm thick s.s.sheet. Inside chamber to have 4nos. S.s.wire shelves on adjustable channel. The unit will have 4 doors with magnatic rubber gascuts & locking provision.	item1368	4	Nos.
1349	1349	WORK TABLE - Size 1500X600X850mm\nTop & undershelf of s.s.sheet on m.s.anlge frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required.	item1369	6	Nos.
1350	1350	EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) - Size 1950x750x600mm\nMade of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.	item1370	2	No.
1351	1351	DOSA PLATE - O/S 1500X600X850\nFramework made of m.s. angle of size 38x38x5mm and 25x25x5 mm. Top made of 16 mm thick m.s. plate with stainless steel channel for draining the excess oil from fry top. The verticals of the equipment are made of stainless steel of size 38 mm dia and cross	item1371	2	No.
1352	1352	IDLY STEAMER (CAP. - 104 IDLY per batch) - STD MODEL\nMade of stainless steel sheet, fitted with Elect. Controls.	item1372	2	No.
1353	1353	EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) for low height burner - Size 1650x750x600mm\nMade of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.	item1373	4	Nos.
1354	1354	LOW HT. TABLE for supporting low height burner - Size 750x750x600mm\nSpecification same as that of work table but the table will be without undershelf & will have cross bracing support at lower portion.	item1374	8	Nos.
1355	1355	LOW HT. BURNER - Size 750x750x600mm\nSpecification same as that of cooking range but the unit will be without undershelf, but will only have cross bracing support at lower portion.	item1375	8	Nos.
1356	1356	EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) for 03 burner cooking range - Size 1650x750x600mm\nMade of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.	item1376	4	Nos.
1357	1357	THREE BURNER COOKING RANGE - O/S 1800X600X850\nStructure made of m.s. angle of size 38x38x5mm, duly rust proof painted. Top of 16Swg thick s.s.sheet. All four side covered up to height of app. 10” by 20Swg stainless steel sheet. Bottom stainless steel stripes sheets complete with gas burners.	item1377	4	Nos.
1358	1358	WORK TABLE for support of 03 burner cooking range - Size 1500X600X850mm\nTop & undershelf of s.s.sheet on m.s.anlge frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required.	item1378	2	No.
1359	1359	EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) for bulk cooker/boiler & fryer - Size 1950x750x600mm\nMade of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.	item1379	8	Nos.
1360	1360	BULK COOKER/boiler TILTING TYPE - Cap.160Ltrs.\nSpecification same as Sno.13 but the frying pan will be Of rectangular shaped with 12”depth & a pouring lip & the unit will be fitted with v type high pressure gas burner with control valve & pilot lamp.	item1380	4	Nos.
1361	1361	BULK FRYER TILTING TYPE - Cap.100Ltrs.\nTriple jacketed body of stainless steel sheet, Inner most jacketed of 16g thick with 12g thick dish ended bottom, second wall for air gap of 18g stainless steel sheet & outer insulation jacket also of 18g stainless steel sheet. The unit will have counter	item1381	4	Nos.
1362	1362	WET GRINDER - Cap.15ltrs (1.0HP)\nStainless steel sheet constd. Body with s.s.sheet constd. Revolving drum, cromium plated pillar support on m.s.angle frame work fitted with electric motor gear box & grinding stones & coconut scraper.	item1382	2	No.
1363	1363	DOUGH KNEADING MACHINE - (CROMPTON MOTOR 2.0 HP) - App. Cap of Bowl 25Ltrs.\nS.S.Mixing bowl, with s.s.rod/strip mixing arm, mounted on steel tubular & sheet frame work duly painted. Complete with 1.0HP Elect. Motor with control switch.	item1383	2	No.
1364	1364	POTATO PEELER - Cap.15Kg./chrgs.(CROMPTON MOTOR 1.0 HP)\n16 gauge Stainless steel sheet peeling drum, lined inside with Abrasive material, stainless steel /cast iron rotating peeling disc. Top of the drum will have a potato inlet door, waste Inlet provision peeled potato discharge door & waste water Outlet pipe	item1384	2	No.
1365	1365	PULVeRISER (Std.) - (CROMPTON MOTOR 1.0 HP)\nStainless steel sheet body,20g thick. the unit will have A top feeding tray & a housing of stainless steel casting With grinding plates & 3 type of meshes for variable type Of grinding requirements. The unit will be fitted with 1.0 hp single Phase electric	item1385	2	No.
1366	1366	WORK TABLE support of pulverisor - Size 1500X600X850mm\nTop & undershelf of s.s.sheet on m.s.anlge frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required.	item1386	2	No.
1367	1367	WORK TABLE WITH SINK for vegetable washing -Size 1950x600x850+150\nTop & Sink bowl of s.s.sheet, on s.s.anlge & s.s.tubular frame work with cross bracing at lower portion. Sink bowl will be integrally welded with top & grinded smooth. Sink bowl size 450x450x250mm.	item1387	2	No.
1368	1368	CHOPPING BOARD for manual vegetable cutting - size:- 1200X600X850mm\nFrame work made of s.s.anlge top will have P.P./Nylon Board for chopping 700x700x100mm chopping board.	item1388	2	No.
1369	1369	VEGETABLE CUTTING MACHINE\nAluminium casted body with ½ hp electric motor safety switch & double feed pusher for round flat & vertical shaped food items etc., the unit will be Table top model with easy to clean provision. Provided with 4 no cutting discs for slicing grating Dicing	item1389	2	No.
1370	1370	CHAPPATI COLLECTION TABLE - Size 1500X600X800\nTop tray of 16G s.s.sheet, tray will have App.100mm ht. collor all around, mounted on s.s.tubular legs with adjustable feet & one s.s.sheet undershelf.	item1390	2	No.
1371	1371	CHAPPATI ROLLING TABLE - Size 2100x750x850mm\nTop & undershelf of s.s.sheet on m.s.anlge frame work & s.s.tubular legs, with adjustable feet. Top to have sound deadning material lining as required. THREE SIDE CROSS BRACING MADE OF S.S. PIPE 1\" DIA FOR UNDERNEATH STORAGE.	item1391	4	Nos.
1372	1372	CHAPPATI PLATE CUM PUFFER - Size 1800x750x850mm\nFrame work of m.s.anlge, mounted on s.s.tubular legs frame work. All sides pannels & undershelf of s.s.sheet, top plate 10mm thick mild steel with cast iron puffing grills for puffing of chappaties. Complete with 'V' shape LPG burners with individual cont	item1392	4	Nos.
1373	1373	EXHAUST HOOD (Without Ducting, Fixing & Extraction fan) for chapatti plate - Size 1950x750x600mm\nMade of s.steel sheet, 20G thick duly welded & pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel & greese collection cup/s.	item1393	4	Nos.
1374	1374	FOOD TROLLEY WITH 4 ROUND PANS, 1 RICE TRAY & STORAGE beneath - O/S 1350X750X900mm\nS.S.Sheet insulated body, Frame work of m.s.anlge of size 38x38x5mm, mounted on 4 castors (2 with brakes) of size 150mm top to have cutout for 4nos. Round pans for Dal, Subzi etc. with 1 rice tray & storage below. Three side covered with s.s.sheet with s.	item1394	16	Nos.
1375	1375	TRAY CARRIER TROLLEY - Size 1200X600X1200mm\nS.S.Bottom base shelf mount at 150mm with all four sides turned down 50mm in 12mm and secured to welded s.s.anlge frame work & PROVIDED WITH THREE NOS. OF DETACHABLE TRAYS CUM SHELFS UNIT WILL BE MOUNTED ON 4\" PILLAR TYPE CASTORS WHEELS (2 NOS. WITH BRAKE & 2 NOS. WITHOUT BRAKE)	item1395	4	Nos.
1376	1376	TRAY SET UP COUNTER WITH BAIN MARIE & DOUBLE OVERSHELVES - Size 1800x600x850+375+225\nTop of 16G s.s.sheet, Bain Marie water tank of 18G s.s.sheet, fitted with 3.0kw heating element with automatic temperature controller. Water outlet provision with drain valve, 3 sides covered with 20G s.s.sheet, Top to accommodate s.s.sheet Food Pans with GN pan 1x2x4\" depth with lid 5 sets.	item1396	8	Nos.
1377	1377	STORAGE CABINET - Size 1200X600X850mm\nTop of 16Swg S.S.Sheet one over shelf, three sides of 20SWG s.s. sheet. Dish storage cabinet with 2 shelves and sliding door will be provided on service side.	item1397	4	Nos.
1378	1378	STORAGE RACK - Size 900X450X1800\nVertical of 32 mm dia stainless steel pipe with adjustable feet 4 no of 18 S.S Sheet at equaly distance.	item1398	20	Nos.
1379	1379	INGREDIENT BINS - Size 600X600X600mm\nMade of S.S. 18 SWG WITH TOP HINGE OPENABLE DOORS SUPPORT WITH FOUR NOS. OF CASTORS, anti crack body, top half hinged lid. Provided with a scoop.	item1399	12	Nos.
1380	1380	DUNNAGE RACK - Size 1200X600X500mm\nMade of s.s.square pipes of size 32x32mm, with support of 25mm square s.s.pipe.	item1400	4	Nos.
1381	1381	DIGITAL WEIGHING SCALE\nCAP. 300KG	item1401	2	No.
1382	1382	POT RACK-3 TIER - Size 1200X600X1500mm\nVerticals of 32mmX32mm square s.s.pipe, 3 shelves welded with vertical frame of 19mm dia s.s.pipe shelves with equal space between two tubes mounted on adjustable feet.	item1402	12	Nos.
1383	1383	SOILED DISH LANDING TABLE WITH GARBAGE CHUTE - Size 2400x600x850mm\nTop of 16G s.s.sheet with 'Sunkun' top. A garbage chute provided on top with a space below to keep dust bin (Not part of equipment). The top will be mounted on m.s.anlge, rust proof painted & s.s.vertical tubular legs with cross bracing support on 3 sides	item1403	2	No.
1384	1384	THREE SINK UNIT - Size 1800x600x850+150mm\nTop & 3 sink bowls of 16G s.s.sheet. Duly welded, grinded & polished smooth mounted on m.s.anlge & s.s.tubular frame work with 150mm back splash. Each Sink Bowl Size 500x500x300mm (without sanitory fittings)	item1404	2	No.
1385	1385	CLEAN DISH TABLE - Size 2100x600x850mm\nSpecification same as that of work table but with 2 undershelves.	item1405	2	No.
1386	1386	CLEAN DISH RACK - Size 900x450x1800mm\nVertical of 32 mm dia stainless steel pipe with adjustable feet 5 no vertical at equal distance 1st shelf fixed at 150mm from floor level.	item1406	10	Nos.
1387	1387	pot stacking platform for heavy pot storage - Size 1500x750x150mm\nS.S Palate frame will be made of 1.5” S.S Square pipe with adjustable bullet feet. And shelf will be made of 2”x3mm S.S Flat Patti.	item1407	2	No.
1388	1388	Masala trolley - Size 600x600x750mm	item1408	4	Nos.
1389	1389	Plateform trolley - Size 900X600X900mm\nStructure will be made of 40x40x5mm duly painted with rust proof paint. Top will be made of 10 SWG. M.S Sheet. 6” high moving wheel (02 Break + 02 Moving)	item1409	2	No.
1390	1390	PRE WASH SINK UNIT - Size 1800x750x850+150\nTop & Sink bowl of s.s.sheet, on s.s.anlge & s.s.tubular frame work with cross bracing at lower portion. Sink bowl will be integrally welded with top & grinded smooth. Sink bowl size 450x450x250mm.	item1410	2	No.
1391	1391	HOOD TYPE COMMERCIAL DISHWASHER\nCap. 40-50 Racks per Hr.\nCYCLE TIME TOTAL/RINSE (SEC) 60-120-180/20\nBASKET SIZE 500X500 MM\nWATER CONSUMPTION 3L/CYCLE\nTANK CAPACITY 20L\nRINSE CAPACITY 12L\nWASH PUMP 1.1KW\nWASH TANK 3KW\nRINSE TANK 8KW\nMAXIMUM USED POWER 9.1\nWATER HARDNESS 70-140 PPM\nWATER PRESSURE 2-4 BAR\nPOWER SUPPLY 400/3+N-/50	item1411	2	No.
1392	1392	DIRTY DISH UNLOADING TABLE - Size 1500x600x850mm\nTop of stainless steel sheet, mounted on m.s.angle & stainless steel tubular frame work. One 18g thick stainless steel sheet bottom Shelf will be fitted on table at a ht dia 150mm from floor.	item1412	2	No.
1393	1393	CLEAN DISH TABLE - Size 2100x750x850mm\nSpecification same as that of work table but with 2 undershelves.	item1413	2	No.
1394	1394	COLD ROOM SECTION\nWALK IN CHILLER CUM FREEZER\nExternal Room Dimensions : 3600X3000mm\nCHILLER Room Temperature - (+ 2°C to 8 °C)\nProduct Entering Temp - + 30°C\nPull Down Time - 15hrs.\nProduct Loading - App.550kg./24hrs.\nWall & Ceiling Panels Insulation - 80mm thick Prefabricated RPUF Panels\nFloor Panel Insulation - 80mm thick RPUF Panels with layer of Tarfelt sheet on both sides.\nPanel Finish - Internal :PCGI , External: PCGI\nRefrigerant -R-22\nNo. of Units - 1 (MAKE:- KIRLOSKAR/TECUMSEH/CARRIER\nConnected Load - 2.5 KW	item1414	2	No.
1395	1395	ALUMINIUM RACK FOR COLD ROOM - Size 1100X500X1500\nVertical of 50x50x5mm aluminium angle with adjustable feet 4 no of 18 swg. Sheet perforated aluminium shelves..	item1415	10	Nos.
1396	1396	ALUMINIUM PALLET FOR COLD ROOM STORAGE - Size 1500X450X150MM\nTop made of 16 swg aluminum sheet placed with s.s. angle 35x35x4 frame work with adjustable bullet feet.	item1416	2	No.
1397	1397	L.P.G GAS PIPE LINE (200 RUNNING FEET APPROX)\nACTUAL MEASUREMENT WILL BE ACCORDING TO As per site conditions	item1417	400	Rn/ Ft
1398	1398	CENTRIFUGAL EXHAUST BLOWER - 20000 CFM	item1418	2	No.
1399	1399	S.S GRATING for kitchen drainage trough\n(APPROX 40 RUNNING FEET)\nACTUAL MEASUREMENT WILL BE ACCORDING TO As per site conditions	item1419	80	Rn/ Ft
1400	1400	EXHAUST HOOD DUCTING (APPROX 2000 SQUARE FEET)\nACTUAL MEASUREMENT WILL BE ACCORDING TO As per site conditions	item1420	2	No.
1401	1401	M.S CYLINDER BANK - 120\"X36”X42”\n(ACCESSORIES ARE NOT INCLUDED)\nTotally constructed in MS angle base of 40x40x5 mm supported with 12mm square wrought iron bars. Front doors are provided along with the locking arrangements made up of 18 SWG CR sheet is duly premiered and painted to prevent from rust etc.	item1421	2	Set
1402	1402	SITC of Liquid Oxygen Tank 10 KL as per technical specifications & List of approved make	item1422	4	Each
1403	1403	SITC of Vaporizer for Liquid Oxygen Tank 10 KL as per technical specifications & List of approved make	item1423	4	Each
1404	1404	SIGNAGE\nFOR BUILDINGS\nSupplying & fixing of retro reflective sign plates of required size. The plate made of High intensity prismatic grade type IV retro reflective sheeting of 3M / Avery Denison or equivalent make approved by I.R.C. / M.O.S.T. with message and graphics to be overlay film/High intensity prismatic grade type IV retro reflective sheeting of 3M / Avery Denison or equivalent make approved by I.R.C. / M.O.S.T Reflective tape of same make duly plotter cut, of approved color, letters (single side) in white colour, to be pasted on 3mm thick ACP sheet of make Alstone / Alstrong / Eurobond / Alucobond or equivalent etc. as per drawings. The sign boards shall fixeed on wall/ roof duly fixed with rawls plugs stainless steel srew/ double side tape 3M make/ SS chain of required size of required nos of holes, wherever required complete as per direction of Unit Incharge	item1424	21	SQM
1405	1405	Supply and fixing of 18 gauge Stainless Steel plates with water jet cutting of grade 304 etching (engraved)signage plate of required size and letters duly bordred . Engraved portion painted of as per required colour/ approved colour (DUCO) of approved brand and filling with required matt/ mirror finish polish on base and border with shining polish of required shade and colour and duly fixed with required nos of rawls plugs stainless steel srew/ double side tape of 3M make/ nut bolt/ spacer required nos of holes, wherever required complete as per direction of Unit Incharge. (make Jindal or Equivalent)	item1425	2040	Sq Inch
1406	1406	Supply and fixing of Powder coated Aluminum Panel for directory of size 900mm x 750mm with partition of required Nos supported on aluminum channel 2 nos backiside with ACP sheet .Matter will Be digital print, matter covered with transprent polycarbonate sheet 0.5 mm wherever required completeand duly fixed with required nos of rawls plugs stainless steel srew/ spacer required nos of holes, wherever required complete as per direction of Unit Incharge	item1426	21	Nos.
1407	1407	Supply and fixing of Amuminium Silver powder coated signage of reqired size complete with message. Matter will be digital print written single sides, matter covered with transparent polycarbonate sheet 0.5mm. and duly fixed with required nos of rawls plugs stainless steel srew/ double side tape of 3M make/ screw required nos of holes, wherever required complete as per direction of Unit Incharge	item1428	55250	SQ INCH
1408	1408	Supply and fixing of Amuminium Silver powder coated signage two plates ( vertical type) of reqired size complete with message. Matter will be digital print written both sides, matter covered with transparent polycarbonate sheet 0.5mm. and duly fixed with required nos of rawls plugs stainless steel srew/ double side tape of 3M make/ screw required nos of holes, wherever required complete as per direction of Unit Incharge	item1429	21250	SQ INCH
1409	1409	Providing & fixing of emergency sign boards single side of required size made of Photo luminescent film having glow power of 4 hours with message and graphics to be screen printing / vinyl cut film of 3M / Avery Denison / LG / Oracle or equivalent make to be pasted on 3mm thick Sun Board sheet all complete and duly fixed with required numbers of rawls plugs stainless steel srew/ double side tape of 3M make required nos of holes, wherever required complete as per direction of Unit Incharge	item1430	55250	Sq Inch
1410	1410	Providing & fixing of Glow-in-the-dark tape to mark safe lanes for pedestrians on the floors/ corridors to lead people to exit location. • Clearly visible in a dark room for 4 + hours • UV and chemical resistant • Strong adhesive Clearly designate aisle ways and emergency pathways in the dark condition. The surface should be cleaned thoroughly before sticking the tape with cleaning agents. Size: 4” Arrow size – green color.	item1431	3400	MTR
1411	1411	Supply & Fixing Display notice pinup board of required size, aluminum beeding of 12 mm and fixed with required numbers of rawls plugs stainless steel srew as per direction of Unit Incharge.	item1432	1530	Sq Ft
1412	1412	Supply & Fixing Key ring holder stand of size 900mm x 600mm. Front door covered with transparent acyrlic shhet and locking arrangment. Fixed with required numbers of rawls plugs stainless steel srew as per direction of Unit Incharge.	item1433	15	Each
1413	1413	Supplying and fixing of 18 gauge Stainless Steel Key Rings 1.245 mm thick (18 gauge) Stainless Steel plates of grade 304 etching (engraved)signage plate of Size 50mm x 38mm of and letters duly bordred as per sample approved and all as per sample. Engraved portion painted of as per required colour/ approved colour (DUCO) of approved brand written bth sides and filling with required matt/ mirror finish polish on base and border with shining polish of required shade and colour as per direction of Unit Incharge	item1434	850	Nos.
1414	1414	Supply & placing of Stainless Steel 304 series Dustbin of size 300 x 175 as per direction of Unit Incharge.	item1435	153	Nos.
1415	1415	Supply & placing of Stainless Steel 304 series Dustbin with foot operated of size 356 mm x 584 mm with plastic bucket as per direction of Unit Incharge.	item1436	153	Nos.
1416	1416	Supplying of Q Manager made of hollow stainless steel pipe of 18 gauge and 900 mm high including 1.30 mtr and 50mm width long ribbon etc. all complete as per direction of Unit Incharge.	item1437	15	Nos.
1417	1417	Provinding and fixing transparent logos/ Letters made out of etching tape 3M sparkle type on the lean glass surface with plain water, scraping glass before fixing film with blade, spray soap solution on glass squeeze excess water and air bubbles. All as directed of approved shape and sizes etc fixed with of required size as required as per direction of Unit Incharge. Make 3M/ Avery Denson	item1438	323	Sqm
1418	1418	Supply & Fixing signages for exit of size 375mm x 200mm x 8mm in acrylic sheet LED light with battary backup	item1439	153	Each
1419	1419	Supply & fixing of signboard made out of 3mm thick sun board with face fully covered with digital print of approved shade and make. The sign board should be fixing on wall,fixed with four rawls plugs stainless steel srew/ double side tape of 3M make required nos of holes, wherever required complete as per direction of Unit Incharge.	item1440	850	Sq Ft
1420	1420	FOR EXTERNAL\nSupplying & fixing of retro reflective sign plates of required size. The plate made of High intensity prismatic grade type IV retro reflective sheeting of 3M / Avery Denison or equivalent make approved by I.R.C. / M.O.S.T. with message and graphics to be overlay film/High intensity prismatic grade type IV retro reflective sheeting of 3M / Avery Denison or equivalent make approved by I.R.C. / M.O.S.T Reflective tape of same make duly plotter cut, of approved color, letters (single side) in white colour, to be pasted on 3mm thick ACP sheet of make Alstone / Alstrong / Eurobond / Alucobond or equivalent etc. as per drawings. The sign boards shall fixeed on wall/ roof duly fixed with rawls plugs stainless steel srew/ double side tape 3M make/ SS chain of required size of required nos of holes, wherever required complete as per direction of Unit Incharge	item1441	85	SQM
1421	1421	Supply and fixing of 18 gauge Stainless Steel plates with water jet cutting of grade 304 etching (engraved)signage plate of required size and letters duly bordred . Engraved portion painted of as per required colour/ approved colour (DUCO) of approved brand and filling with required matt/ mirror finish polish on base and border with shining polish of required shade and colour and duly fixed with required nos of rawls plugs stainless steel srew/ double side tape of 3M make/ nut bolt/ spacer required nos of holes, wherever required complete as per direction of Unit Incharge. (make Jindal or Equivalent)	item1442	34000	Sq Inch
1422	1422	Supply and fixing of Powder coated Aluminum Panel for directory of size 900mm x 750mm with partition of required Nos supported on aluminum channel 2 nos backiside with ACP sheet .Matter will Be digital print, matter covered with transprent polycarbonate sheet 0.5 mm wherever required completeand duly fixed with required nos of rawls plugs stainless steel srew/ spacer required nos of holes, wherever required complete as per direction of Unit Incharge	item1443	68	Nos.
1423	1423	Supply and fixing of Amuminium Silver powder coated signage of reqired size complete with message. Matter will be digital print written single sides, matter covered with transparent polycarbonate sheet 0.5mm. and duly fixed with required nos of rawls plugs stainless steel srew/ double side tape of 3M make/ screw required nos of holes, wherever required complete as per direction of Unit Incharge	item1444	102000	SQ INCH
1424	1424	Supply and fixing of Amuminium Silver powder coated signage two plates ( vertical type) of reqired size complete with message. Matter will be digital print written both sides, matter covered with transparent polycarbonate sheet 0.5mm. and duly fixed with required nos of rawls plugs stainless steel srew/ double side tape of 3M make/ screw required nos of holes, wherever required complete as per direction of Unit Incharge	item1445	34000	SQ INCH
1425	1425	Providing & fixing of emergency sign boards single side of required size made of Photo luminescent film having glow power of 4 hours with message and graphics to be screen printing / vinyl cut film of 3M / Avery Denison / LG / Oracle or equivalent make to be pasted on 3mm thick Sun Board sheet all complete and duly fixed with required numbers of rawls plugs stainless steel srew/ double side tape of 3M make required nos of holes, wherever required complete as per direction of Unit Incharge	item1446	102000	Sq Inch
1426	1426	Providing & fixing of Glow-in-the-dark tape to mark safe lanes for pedestrians on the floors/ corridors to lead people to exit location. • Clearly visible in a dark room for 4 + hours • UV and chemical resistant • Strong adhesive Clearly designate aisle ways and emergency pathways in the dark condition. The surface should be cleaned thoroughly before sticking the tape with cleaning agents. Size: 4” Arrow size – green color.	item1447	2975	MTR
1427	1427	Supply & Fixing Display notice pinup board of required size, aluminum beeding of 12 mm and fixed with required numbers of rawls plugs stainless steel srew as per direction of Unit Incharge.	item1448	850	Sq Ft
1428	1428	Supply & Fixing Key ring holder stand of size 900mm x 600mm. Front door covered with transparent acyrlic shhet and locking arrangment. Fixed with required numbers of rawls plugs stainless steel srew as per direction of Unit Incharge.	item1449	15	Each
1429	1429	Supplying and fixing of 18 gauge Stainless Steel Key Rings 1.245 mm thick (18 gauge) Stainless Steel plates of grade 304 etching (engraved)signage plate of Size 50mm x 38mm of and letters duly bordred as per sample approved and all as per sample. Engraved portion painted of as per required colour/ approved colour (DUCO) of approved brand written bth sides and filling with required matt/ mirror finish polish on base and border with shining polish of required shade and colour as per direction of Unit Incharge	item1450	680	Nos.
1430	1430	Supply & placing of Stainless Steel 304 series Dustbin of size 300 x 175 as per direction of Unit Incharge.	item1451	213	Nos.
1431	1431	Supply & placing of Stainless Steel 304 series Dustbin with foot operated of size 356 mm x 584 mm with plastic bucket as per direction of Unit Incharge.	item1452	51	Nos.
1432	1432	Supplying of Q Manager made of hollow stainless steel pipe of 18 gauge and 900 mm high including 1.30 mtr and 50mm width long ribbon etc. all complete as per direction of Unit Incharge.	item1453	21	Nos.
1433	1433	Provinding and fixing transparent logos/ Letters made out of etching tape 3M sparkle type on the lean glass surface with plain water, scraping glass before fixing film with blade, spray soap solution on glass squeeze excess water and air bubbles. All as directed of approved shape and sizes etc fixed with of required size as required as per direction of Unit Incharge. Make 3M/ Avery Denson	item1454	298	Sqm
1434	1434	Supply & Fixing signages for exit of size 375mm x 200mm x 8mm in acrylic sheet LED light with battary backup	item1455	102	Each
1435	1435	Supply & fixing of signboard made out of 3mm thick sun board with face fully covered with digital print of approved shade and make. The sign board should be fixing on wall,fixed with four rawls plugs stainless steel srew/ double side tape of 3M make required nos of holes, wherever required complete as per direction of Unit Incharge.	item1456	1020	Sq Ft

Also Visit

Tenders

Assam Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of New Medical College Centering Mmch And Kalapahar Campus Along With 800 Bedded General Hospital At Mmch Campus In Guwahati . , Guwahati-Assam

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of New Medical College Centering Mmch And Kalapahar Campus Along With 800 Bedded General Hospital At Mmch Campus In Guwahati . , Guwahati-Assam

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us