Kerala State Electricity Board-KSEB has published Providing Partition , Flooring And Allied Works To The Newly Constructed 220Kv Control Room Building Providing Partition , Flooring And Allied Works To The Newly Constructed 220Kv Control Room Building For Accommadating Division , Subdivisions And Se. Submission Date for this Tender is 25-01-2021. Building Work Tenders in 110kv Chalakudy Substation compound Kerala. Bidders can get complete Tender details and download the document.
| Name of Work:- Providing partition, flooring and allied works to the newly constructed 220kV control room building for accomadating Division ,Subdivisions, & section offices under Transmission division Chalakudy | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Plastering with cement mortar 1:4, 12mm thick for ceiling etc. complete Complete as per the direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001113 | 500 | m2 |
| 2 | 2 | Providing and laying autoclaved aereated cement blocks masonry 100mm/230mm/300mm thick AAC blocks in superstructure above plinth level up to floor five five level in CM 1:4( 1 cememt ,4 sand). The rate includs providing and placing 2 nos 6mm dia MS bars barsat every third course of masonry work. | 1.85 | m3 | |
| 3 | 3 | Providing and laying vitrified floor tiles (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc. Complete as per the direction of Engineer-in-charge. | 320 | m2 | |
| 4 | 4 | White cement washing two coats for new surface including cost and conveyance of all materials, labour charges, etc. complete for ceiling. | 500 | m2 | |
| 5 | 5 | Applying priming coats with primer approved brand and manufacture, with water thinneable cemnt primer on wall surface having low VOC (Volatine organic compound) content less than 50 gms/ltr | 500 | m2 | |
| 6 | 6 | Wall painting two or more coats with acrylic emulsion paint of approved brand andmanufacture to give an even shade (for inside walls) complete as per the direction of Engineer-in-Charge. | 650 | m2 | |
| 7 | 7 | Providing and fixing powder coated aluminium work for partitions with extruded built up standard tubular sections /appropriate Z sections and other sections of approved make confirming to IS 733 and IS 1285, fixing with dash fasternes of required dia and size , including necessary filling up the gap at sections, ie, at top , bottam and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust,free straight, mitred,and joint mechanicaly where ever required including cleat angle, Aluminium snap beading for glazing / paneling, CP Brass stainless steel screws,etc. complete as per the direction of Engineer in charge. | 1214.2 | kg | |
| 8 | 8 | Providing and fixing glazing in aluminium partitions with float glass panes of 4 mm thickness with EPDM rubber/neoprene gasket etc. complete as per the direction of Engineer in charge. | 92.9 | m2 | |
| 9 | 9 | Providing and fixing 12mm thick prelaminated particle board with decarative lamination on both side flat pressed three layer or graded wood particle board confirming to IS 12823 Grade I Type II with CP brass /stainless steel screws etc. complete above plinth level as directed by Engineer - in- charge. | 145 | m2 | |
| 10 | 10 | Providing and fixing bright finished stainless steel but hinges 100/10 mm with necessary screws etc. complete as per direction of Engineer- in -charge | 44 | No | |
| 11 | 11 | Providing and fixing ISI marked stainless steel ISI marked door handles , with necessary screws etc. complete as per direction of Engineer- in -charge. | 11 | No | |
| 12 | 12 | Providing and fixing bright finished stainless steel tower bolts 100/10 mm ( barrel type ) with necessary screws etc. complete as per direction of Engineer- in -charge | 22 | No | |
| 13 | 13 | Providing and fixing 100mm brass locks (best make of approved quality)for aluminium doors including necessary cutting and making good etc. complete as per the direction of Engineer in charge. | 11 | No | |
| 14 | 14 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete as per direction of Engineer- in -charge. | 11 | No | |
| 15 | 15 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. | 2 | No | |
| 16 | 16 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge. | 4.9 | m | |
| 17 | 17 | Providing and fixing factory made 30 mm thick plain PVC door shutters consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. | 10 | m2 | |
| 18 | 18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle green, black of any size asapproved by Engineer-in-Charge, in skirting, risers of steps and dados,over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade Completd as per the direction of Engineer-in-charge. | 10 | m2 | |
| 19 | 19 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4Coarse sand), including pointing the joints with white cement and matching pigment etc, Complete as per the direction of Engineer-in-charge.. | 2.5 | m2 | |
| 20 | 20 | Providing and fixing white vitreous china wall mounting water closet of size 780 X 370 X 690 mm of approved shape and make including providing and fixing white vitreous china cistern with duel flush fittingsof flushing capacity 3lt/6lt (adjustable to 4lt)including fittings seat cover,cistern, fitting nuts,bolts and gasket etc ( Parryware,Hindware,Cera etc. preffered ) Complete. as per the directions of Engineer-in-charge. | 1 | No. | |
| 21 | 21 | Supplying and fixing 550mm x 400mm or nearest size wash hand basin of white glazed earthen ware ( Indian make best quality) ,15mm CP brass pillar tap heavy type, 1 No. 15mm heavy PVC connection with brass union , 1 No. 15mm GM Wheel valve , 32mm CP waste with chain and plug , 1 No. 15mm GM Wheel valve, 1 No. Aluminium anodised towel rail, 1 pair C.I brackets for basin with sundries such as TW plugs,screws,etc. complete including cutting and making good the walls, painting the brackets with suitable colour 2 coats,cost and conveyance of all the materials to site ,all labour charges etc. ( Parryware,Hindware,Cera etc. preffered ) completed as per the directions of Engineer-in-charge. | 3 | No. | |
| 22 | 22 | Providing and fixing 20 mm nominal outer dia Chlorinated Polyvinyl Chloride 20mm dia (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.) | 10 | m | |
| 23 | 23 | Providing and fixing 25mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge (external work) | 25 | m | |
| 24 | 24 | Supplying and fixing 15mm or nearest size C.P tap Long body with all fittings using suitable materials as per the direction of Deptl. officers. | 1 | m | |
| 25 | 25 | Providing and fixing steel health faucet (superior quality) Complete as per the direction of Engineer-in-charge. | 1 | m | |
| 26 | 26 | Providing and fixing PVC pipe including jointing of pipes with one step PVC solvent cement, trenching, refilling and testing of joints as per direction of Engineer in charge 50mm | 20 | m | |
| 27 | 27 | Supplying, laying and jointing 110mm nominal dia PVC Pipes (4 kgf/cm2) and specials such as tees,bends, elbows, checknuts etc.including cutting and making good the walls etc. complete as per the direction of Engineer in charge | 20 | m |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
