Indo Tibetan Border Police Force-ITBP has published Construction And Renovation At Bop Tuting Construction Of Cc Path And Renovation Of Jawan Barrack , Office Complex , Cooking House Cum Dining Hall For Sos At Tuting Post Of 49 Bn Itbp , Basar . . Submission Date for this Tender is 23-01-2021. Building Work Tenders in BOP Tuting of 49 BN ITBP, Basar Arunachal Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: C/O CC Path and Renovation of Jawan Barrack,Office Complex,Officer Hut.Cooking house cum dinning hall for SO's at Tuting post of 49th Bn, ITBP, Basar (A.P) | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil | 1.01 | 1494.1 | Sqm |
| 2 | 2 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15cm deep and disposal of rubbish lead upto 50 m and lift 1.5m: All kinds of soil. | 1.02 | 1494.1 | Sqm |
| 3 | 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) | 1.03 | 178.5 | Cum |
| 4 | 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level: 1:5:10( 1 cement: 5 Coarse sand :10 graded stone aggregate 40mm norminal size) Cement brand should be of CCI / ACC / Ambuja / Birla / L & T to be used. | 1.04 | 164.49 | Cum |
| 5 | 5 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns | 1.05 | 139.1 | Sqm |
| 6 | 6 | Providing and fixing 25 mm thick local avilable wood planking, tongued and grooved in flooring including fixing with iron screws complete.stone aggregate 20 mm nominal size) | 1.06 | 58.4 | Sqm |
| 7 | 7 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 1.07 | 23.08 | Sqm |
| 8 | 8 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).local avilable wood | 1.08 | 0.53 | Cum |
| 9 | 9 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Local avilable wood | 1.09 | 5.3 | Cum |
| 10 | 10 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.Local avilable wood 35 mm thick shutters | 1.1 | 6 | Sqm |
| 11 | 11 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately):12 mm thick | 1.11 | 140.4 | Sqm |
| 12 | 12 | Providing and fixing 18 mm thick, 150 mm vide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I , IS :3087 marked, including top cover of 6 mm commercial ply wood conforming to IS : 303 BWR grade. Nickel plated M.S pipe 20 mm dia (Heveay type) curtain rod with nickel platedd brackets, including fixing with 25x3 mm M.S flat 10 cm long fixed to pelmet with local wood cleats of size 100mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. | 1.12 | 57.3 | Mtrs |
| 13 | 13 | Providing and fixing Anodized Allum Sliding bolts with nut and screws 250x16mm conforming to IS 2681-1979 of brand Classic/EPSA ISI/Décor/Venus /Adersh /crown ( anodic coating not less than grade AC 10 as per IS : 1868 ) | 1.13 | 16 | Each |
| 14 | 14 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10mm | 1.14 | 16 | Each |
| 15 | 15 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100x10 mm | 1.15 | 32 | Each |
| 16 | 16 | Providing and fixing Anodized Allum Handles 125mm IS 208 of brand Classic/ EPSA ISI/ Décor/Venus /Adersh /crown ( anodic coating not less than grade AC 10 as per IS : 1868 ) size 125 mm | 1.16 | 16 | Each |
| 17 | 17 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | 1.17 | 23.97 | Sqm |
| 18 | 18 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 1.18 | 781.5 | Sqm |
| 19 | 19 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 1518 microns using self drilling/ self tapping screws complete : | 1.19 | 138.5 | Mtrs |
| 20 | 20 | Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. | 1.2 | 1495.59 | Sqm |
| 21 | 21 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) | 1.21 | 785.68 | Sqm |
| 22 | 22 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : two or more coats on new work work | 1.22 | 785.68 | Sqm |
| 23 | 23 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work | 1.23 | 508.64 | Sqm |
| 24 | 24 | Finishing walls with water proofing cement paint of required shade :Old work (one or more coats @ 2.20 kg/10 sqm) complete. | 1.24 | 1045.64 | Sqm |
| 25 | 25 | Repairs to plaster of thickness 12 mm to 20mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and repairing and plastering the surface of the wall complete including disposal of rubbish to the dumping ground with in 50 mtr lead with mortar 1:4 (1 cement: 4 fine sand) | 1.25 | 111.1 | Sqm |
| 26 | 26 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty : Float glass panes of thickness 4 mm | 1.26 | 3.33 | Sqm |
| 27 | 27 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | 1.27 | 2 | Each |
| 28 | 28 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid | 1.28 | 3 | Each |
| 29 | 29 | Providing and fixing wash basin with C.I./M.S. brackets, 15 mm C.P. brass pillar taps, Kingston/Gem/Techno/ Parko, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :A] White Vitreous china flat back wash basin size 550X400 mm with single 15 mm C.P brass pillar tap | 1.29 | 5 | Each |
| 30 | 30 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :510x1040 mm bowl depth 200 mm | 1.3 | 2 | Each |
| 31 | 31 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm dia. | 1.31 | 8 | Each |
| 32 | 32 | Providing and fixing mirror of superior glass of approved quality with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Rectangular shape 453x357 mm | 1.32 | 7 | Each |
| 33 | 33 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15 mm dia nominal bore | 1.33 | 50 | Mtrs |
| 34 | 34 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 20 mm dia nominal bore | 1.34 | 35 | Mtrs |
| 35 | 35 | Providing and fixing CP brass long body bib cock 15 mm dia of make Parko/Kingstone/Essco confirming to IS:8931 | 1.35 | 6 | Each |
| 36 | 36 | Providing and fixing CP brass stop cock 15 mm dia ( concealed) of make Parko/Kingstone/Essco confirming to IS:8931 | 1.36 | 10 | Each |
| 37 | 37 | Providing & fixing 6 mm thick ply board with suitable screws in ceiling/partioion etc complete. ( frame work to be paid separately.) | 1.37 | 785.68 | Sqm |
| 38 | 38 | Providing and fixing wooden beading of size 40x10 mm to ceiling / side insulation frames with iron screws/nails, plugs etc complete | 1.38 | 1037.1 | Mtrs |
| 39 | 39 | Single wattle or split bamboo walling including cement plaster 20 mm thick 1:4 (1cement : 4 fine sand) on both sides as per direction of Engineer-in-Charge. | 1.39 | 37.5 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
