| 1 |
1 |
Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc |
|
300 |
Sqm |
| 2 |
2 |
Dismantling of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed |
|
5 |
Cum |
| 3 |
3 |
M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed |
|
3 |
Cum |
| 4 |
4 |
All as per Srl item No 3 above but except bricks (old dismantled serviceable bricks obtained from Srl item No 2 shall be reused after necessary cleaning of mortar) |
|
2 |
Cum |
| 5 |
5 |
M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3 finishing even and smooth without using extra cement complete all as specified and directed |
|
50 |
Sqm |
| 6 |
6 |
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement complete all as specified and directed |
|
200 |
Sqm |
| 7 |
7 |
All as per Srl item No 6 above but in CM 1:6 on other than fair finishes of walls. |
|
50 |
Sqm |
| 8 |
8 |
M&L for prepration of newly plastered/un plastered surfaces of wall and applying two coats of cement base paint of shade as approved complete all as specified and directed. |
|
400 |
Sqm |
| 9 |
9 |
All as per Srl item No 8 above but on old decorated in one coat on surfaces of walls. |
|
300 |
Sqm |
| 10 |
10 |
M&L for applying 2mm thick birla white wall care putty on wall after complete removal of exsiting treatment complete all as specified and directed. |
|
150 |
Sqm |
| 11 |
11 |
M&L for applying two coats of oil bound distemper above a coat of primer including preperation of newly plastered/putty surfaces all as per specified and directed. |
|
300 |
Sqm |
| 12 |
12 |
All as per Srl item No 11 above but one on old surfaces after preperation of surfaces. |
|
400 |
Sqm |
| 13 |
13 |
M&L for applying three coats of whitewash on ceiling including preperation of new plastered surfaces complete all as specified and directed. |
|
70 |
Sqm |
| 14 |
14 |
M&L for applying one coat of whitewash on ceiling including preperation of old decorated surfaces all as per specified and directed. |
|
200 |
Sqm |
| 15 |
15 |
Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed |
|
40 |
Each |
| 16 |
16 |
All as per Srl item No 15 above but size of opening exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr |
|
20 |
Each |
| 17 |
17 |
Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed |
|
15 |
Each |
| 18 |
18 |
Taking down shutter of any description not exceeding 1 sqm each complete all as specified and as directed |
|
70 |
Each |
| 19 |
19 |
Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete and refixing in the same opening all as specified and directed after easing and adjustment. |
|
18 |
Each |
| 20 |
20 |
M& L for Box type steel window double (glazed & gauged) emade of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame comprise glazed skelton shutter door frame of ERW tube P-section size 50 mm x 20 mm with one/two Nos openable leaf either side cnsisting of two Nos of sash bar of T-sec 20 mm x 3 mm welded to frame with one No vertcale mullion of ERW of ERW box type T-section size of 60 mm x25 mm FI 2 mm thick welded / screwed to frame for fixing of wire guage/glass including fixture and fitting like as handle, tower bolt stopper , cleat, pintal hinges, holdfast primer etc, all as shown on Drg No CE JZ/TD-1019/08 & Sh 1/3 to 3/3 dt 01 May 2008 complete. \n(i) Hold fast 150mm long mild steel flat iron 12x3mm made to shape- 04 Nos per window\n(ii) Handle of Z section 20mm x 25mm, 100 mm long - 01 No per leaf.\n(iii) MS tower bolt 150mm long 2 No per leaf. \n(iv) Z section 20mmx25mm, 100mm long stopper – 01 Nos per leaf.\n(v) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf \n(vi) Fabrication and fixing arrangements as per Drg No CE JZ/TD-1019/08 & Sh 1/3 to 3/3 dt 01 May 2008.\nNote:- MS guard bar, glass panes, wire mesh and painting shall be meausered and paid seperately. |
|
30 |
Sqm |
| 21 |
21 |
Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 complete all as specified. NOTE : , Guard bar, Sheet glass and painting shall be measured and paid Separately. |
|
5 |
Sqm |
| 22 |
22 |
S&F pressed steel frames 1.25mm thick for door size of frame 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges complete all as specified and directed. |
|
100 |
RM |
| 23 |
23 |
M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in bed blocks for hold fast & similar work etc including necessary formwork required complete all as specified and directed |
|
1.5 |
Cum |
| 24 |
24 |
S&F IInd class hard wood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply on both faces. (The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated) complete all as specified and directed |
|
15 |
Sqm |
| 25 |
25 |
Supply and fixing 35mm thick flush shutter, solid core construction with block board core and ply wood face panels commercial type both side complete all as specified and directed. |
|
40 |
Sqm |
| 26 |
26 |
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,3 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face &2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing. |
|
40 |
Sqm |
| 27 |
27 |
S&F IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed |
|
40 |
Sqm |
| 28 |
28 |
S/F framed work as door, chowkhats, and Grill gates of angle frame work fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also festering and fixing complete. |
|
300 |
Kgs |
| 29 |
29 |
S&F Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm. |
|
50 |
Each |
| 30 |
30 |
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
|
100 |
Sqm |
| 31 |
31 |
All as per Srl item No 30 above but fixed in repairs. |
|
30 |
Sqm |
| 32 |
32 |
Hacking out old broken glass from wooden/ steel window cleaning the surface and removing from the site. |
|
50 |
sqm |
| 33 |
33 |
S&F Sheet glass, 3mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane including wooden beading fixed nails complete all as specified and directed. |
|
80 |
Sqm |
| 34 |
34 |
All as per Srl item No 33 above but figured glass pin head type & glazing with oil putty |
|
20 |
Sqm |
| 35 |
35 |
S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty/wooden beading in square exc 0.5 sq.m. in each pane complete all as specified and directed. |
|
10 |
Sqm |
| 36 |
36 |
S&F 300mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed |
|
50 |
Each |
| 37 |
37 |
S&F Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed |
|
100 |
Each |
| 38 |
38 |
S&F 150mm long Aluminium handles, cast type anodised |
|
100 |
Each |
| 39 |
39 |
M&L in repair for Block Boards, 18/19mm thick, grade 1 quality , exterior grade, commercial type, fixed with screws to timber frame work.Make:-Green ply,Anchor or equivalent |
|
50 |
Sqm |
| 40 |
40 |
M&L for external teak wood lipping, 6mm thick for 18/19mm thick block board or prelaminated particle board, fixed with nails including french polish etc complete all as specified and directed. |
|
100 |
RM |
| 41 |
41 |
S&F butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed. |
|
150 |
Each |
| 42 |
42 |
S&F 100mm long Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed. |
|
50 |
Each |
| 43 |
43 |
S&F 300mm long ordinary rat tail rod pattern spring, including roller and roller plate all as specified and directed. |
|
50 |
Each |
| 44 |
44 |
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises all as directed. |
|
510 |
Sqm |
| 45 |
45 |
S&F non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 20mm thick screed bed in CM 1:6 & complete all as specified and directed. |
|
400 |
Sqm |
| 46 |
46 |
All as per item No 45 but on vertical surfaces but over and including rendering 10mm thick in CM 1:4. |
|
10 |
Sqm |
| 47 |
47 |
S&F glazed ceramic dark coloured tiles 300x200mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed. |
|
100 |
Sqm |
| 48 |
48 |
S&F in repair vitreous China Squatting pan 'Orrisa' pattren size 580x440mm white with integral foot rest and PVC(SWR) 'P' trap 110mm bore complete. |
|
20 |
Each |
| 49 |
49 |
S&F in repair 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia complete all as specified and directed |
|
15 |
Each |
| 50 |
50 |
S&F in repair vitreous China wash basin white,flat back size550x400mm including CP waste coupling 32mm bore,waste PVC pipe complete, CP brass Pillar tap 15mm bore complete all as per specified and directed. |
|
10 |
Each |
| 51 |
51 |
S&F in repair Brass Chromium plated Tubular towel rail, 20 mm dia. D type, 60 cm long between flanges all as per specified and directed. |
|
20 |
Each |
| 52 |
52 |
S&F PVC connection 15mm size with PTMT nuts of length 600mm all as per specified and directed. |
|
80 |
Each |
| 53 |
53 |
Dismantling water tanks exc 500 Ltr & not exceeding 1000Ltr and S&F rotational moulded polythene, triple layers, water storage tank 1000 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete all as specified and directed |
|
30 |
Each |
| 54 |
54 |
Taking up or down 15mm bore steel tubing and connections , including cleaning for re-fixing or removal of store. |
|
200 |
RM |
| 55 |
55 |
Ditto all as per item No 54 but 20mm bore. |
|
100 |
RM |
| 56 |
56 |
S&F 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed. |
|
200 |
RM |
| 57 |
57 |
Ditto all as per item No 56 but 20mm bore. |
|
100 |
RM |
| 58 |
58 |
S&F in repairs chromium plated angle valve 15mm bore fancy type screwed down for high pressure complete all as specified and directed. |
|
40 |
Each |
| 59 |
59 |
S&F in repair of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed. |
|
40 |
Each |
| 60 |
60 |
S&F in repair Pillar taps 15mm bore, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed all as per specified and directed. |
|
25 |
Each |
| 61 |
61 |
S&F in repair 15mm bore Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed all as per specified and directed. |
|
10 |
Each |
| 62 |
62 |
S&F in repairs CP shower rose fancy type with CP arm complete all as specified and directed. |
|
50 |
Each |
| 63 |
63 |
S&F in repair PVC waste pipe32mm dia fixed to WHB |
|
80 |
Each |
| 64 |
64 |
S&F in repairs MS pipe 20mm bore, powder coated chromium plated with fixing brackets stops rollers including fancy type knobs two Nos to each curtain rod all as per specified and directed. |
|
250 |
RM |
| 65 |
65 |
S&F in repairs 110/75/125mm dia CP grating with or without hinge type or hole type complete all specified and directed. |
|
25 |
Each |
| 66 |
66 |
S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass,mounted on 4mm thick commercial plywood incl all around teak wood beading and fixed to wall complete all as specified and directed. |
|
25 |
Each |
| 67 |
67 |
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar all as per specified and directed. |
|
5 |
XSqm |
| 68 |
68 |
M&L Granite (of any type) work (table rubbed and polished) 20mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 all as per specified and directed. |
|
50 |
Sqm |
| 69 |
69 |
M&L for RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in shelves, roof landing , chajja upto 6 mtr height etc incl demolition complete all as specified and directed. |
|
1 |
Cum |
| 70 |
70 |
Use and wase of form work to soffits of suspended slab such as roof slab Floor slab, shelves and chajjas etc not cxc 200mm thick complete. |
|
50 |
Sqm |
| 71 |
71 |
Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed. |
|
10 |
Cum |
| 72 |
72 |
M&L for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate as in plinth protection Finishing fair and even all as per specified and directed. |
|
100 |
Sqm |
| 73 |
73 |
M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor all as per specified and directed. |
|
100 |
Sqm |
| 74 |
74 |
M&L for Chequred cement concrete tiles 30 cm x 30 cm x 25 mm thick set and jointed and pointed in neat cement slurry in floors with grey cement and no pigment over screed bed 15 mm thick in CM 1:6 all as per specified and directed. |
|
80 |
Sqm |
| 75 |
75 |
M&L for Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments over and including 25mm thick sand cushioning complete all as specified and directed. |
|
100 |
Sqm |
| 76 |
76 |
Taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories |
|
40 |
RM |
| 77 |
77 |
S&F 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge. |
|
50 |
RM |
| 78 |
78 |
S&F 110mm bore PVC (SWR) bends any radius With access door |
|
10 |
Each |
| 79 |
79 |
M&L two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of previously untreated surfaces all as per specified and directed. |
|
100 |
Sqm |
| 80 |
80 |
All as per Srl item No 79 but one coat on old decorated steel/iron surfaces |
|
50 |
Sqm |
| 81 |
81 |
M&L two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described including prepration of previously untreated surfaces all as per specified and directed. |
|
80 |
Sqm |
| 82 |
82 |
All as per Srl item No 81 but ne coat on old decorated wooden surfaces. |
|
70 |
Sqm |
| 83 |
83 |
S&F stainless steel kitchen sink with draining board made of 1mm thick sheet for kitchen with plug washers wate pipe cast iron canti lever bracket ovre all size 950 x 550mm with bowlsize 550x440x160mm complete all as specified and directed. |
|
10 |
Each |
| 84 |
84 |
S&F in repair stainless steel kitchen plate rack size 900 x 750 x 300mm deep made out of 1mm thick sheet including fitting arrangement complete. |
|
10 |
Each |
| 85 |
85 |
S& F 18 mm thick PVC board as in shelves for kitchen cabinets etc all as specified.. Make Rajshri/ Sintex |
|
20 |
Sqm |
| 86 |
86 |
S& F 5 mm thick PVC board as in back side of for kitchen cabinets etc all as specified.. Make Rajshri/Sintex |
|
10 |
Sqm |
| 87 |
87 |
S& F 18 mm thick PVC shutters one side prelaminated of any shade for kitchen cabinets etc all as specified.. Make Rajshri/Sintex |
|
15 |
Sqm |
| 88 |
88 |
Supplying and fixing stainless steel rolling drawer pull type suitable for kitchen cabinets with all fixing arrangement area of each drawer n exc 0.30 sqm of vertical face having depth 450mm to 600mm complete all as specified.Note:- Net area of front finished surface will be measured. |
|
2 |
Sqm |
| 89 |
89 |
S& F 40mm long self closing type hydraulic steel hinges complete all as specified |
|
30 |
Each |
| 90 |
90 |
M&l for light shade Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
|
80 |
Sqm |
