Military Engineer Services-MES has published Special Repair To Bldg No T-14/2 At 2 Med Regt And Certain Other Sanctioned Works Under Age B/R-I At Ge Jhansi. Submission Date for this Tender is 28-01-2021. Building Repair Tenders in GE Jhansi Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 21-Jan-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-01-2021 |
Name of Work : SPECIAL REPAIR TO BLDG NO T-14/2 AT 2 MED REGT AND CERTAIN OTHER SANCTIONED WORKS UNDER AGE B/R-I AT GE JHANSI | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. | 105 | Sqm | |
2 | 2 | Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc. | 13.6 | Cum | |
3 | 3 | Dismantling of wall / ceiling boards (fiber, pulp, insulation etc) / insulation boards /slabs/blankets of any thickness including cover fillets ridges etc, complete all as specified and directed. | 75 | Sqm | |
4 | 4 | Dismantling Asbestos Cement Corrugated or Semicorrugate in Roof covering, complete all as specified and directed. | 592 | Sqm | |
5 | 5 | Dismantling of Framed timber scandling 40sq cm and over in section in any position complete all as specified and directed. | 4.29 | Cum | |
6 | 6 | Taking down chowkats or frame (without taking off shutter from the frame) exc. 1.5 Sqm but n exc 4.00 sqm each. | 3 | Each | |
7 | 7 | Demolition of cement concrete in ground floor including terrazo flooring and paving n exc 15cm thickness (below or above the ground level) built in cement mortar, complete all as specified. | 0.15 | Cum | |
8 | 8 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises | 8 | Sqm | |
9 | 9 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for , foundationmanholes,etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified. | 225.75 | Cum | |
10 | 10 | Returning filling in including spreading, levelling ,watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed. | 72.4 | Cum | |
11 | 11 | Removing excavated material to a distance exceeding 50 meter upto 250mtr and deposited where directed at level not exceeding 1.5 m above the starting point complete all as specified and directed. | 153.35 | Cum | |
12 | 12 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard dence soil complete all as specified and directed | 186.25 | Sqm | |
13 | 13 | Filling under floor and spreading in layers including well ramming ,watering as required(Soil reused from Sl Item No 4 as above) | 8.75 | Cum | |
14 | 14 | M&L Hardcore (Broken stone) of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified. | 21.41 | Cum | |
15 | 15 | M & L for cement concrete 1:4:8 type D2 using 40 mm graded aggregate as in foundation and mass concreting complete all as specified and directed. | 22.53 | Cum | |
16 | 16 | M&L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate), as in sub base complete all as specified and directed. | 145 | Sqm | |
17 | 17 | M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection and path laid in alternate panels not more than 2 mtr in length, laid to slope 1:30 including forming joints 10 mm wide and upto full depth of PCC and filled with bitumen mastic (1:3) 1 part bitumen 85/25 and 3 parts of sand complete all as specified and directed. {Note:-Rate is deemed to be inclusive of materials against forming & filling of joints } | 144.25 | Sqm | |
18 | 18 | M&L for PCC 1:3:6 type C2 as in bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested for CI pipe 150mm bore. | 75 | RM | |
19 | 19 | M&L for 75 mm thick cement concrete type C1 1:3:6 (using 40 mm graded stone agg) in sub base of flooring/ hard standing complete all as specified and directed by Engr in charge | 117 | Sqm | |
20 | 20 | M&L for cement concrete 1:2:4 type B-0 (12.5mm graded aggregate) as in bed block for hold fast, levelling course etc for complete all as specified. | 3.45 | Cum | |
21 | 21 | M&L for cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in coping, benching,edging to interlocking tile,cills, seismic band and suacer drain/surface channel includes haunching and the like including weathering, slightly rounded or chamfered angles and throating including neccessary form work etc complete all as specified. | 4.75 | Cum | |
22 | 22 | M&L for 75mm thick Plain cement concrete 1:2:4 type B-1 as in Flooring( using 20mm graded agg ) finished even and smooth without using extra cement laid in alternate panels not more than 2 mtr in length, laid to slope 1:30 including forming joints 10 mm wide and upto full depth of PCC and filled with bitumen mastic (1:3) 1 part bitumen 85/25 and 3 parts of sand complete all as specified and directed. {Note:-Rate is deemed to be inclusive of materials against forming & filling of joints} . | 46 | Sqm | |
23 | 23 | M&L for precast manhole covers with plain faces using RCC 1:2:4 type B1 and set in CM 1:4 including formwork | 2.35 | Cum | |
24 | 24 | M&L for precast cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in lintels, shelf etc including necessary formwork and set in CM 1;4 complete all as specified. | 0.85 | Cum | |
25 | 25 | M&L for precast cement concrete 1:2:4 type B-1 (12.5mm graded aggregate) as in Jallies or louvres etc including necessary formwork and set in CM 1;4 complete all as specified. | 10.25 | Sqm | |
26 | 26 | M&L 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate) complete all as specified and directed. | 6.75 | Sqm | |
27 | 27 | M & L for RCC 1:1.5:3 (nominal mix) using 20mm graded aggregates as in beams, cantilevers, bressummers, lintels complete all as specified and directed. | 6.25 | Cum | |
28 | 28 | M & L for RCC 1:1.5:3 (nominal mix) using 20mm graded aggregates as in chajjas,shelf etc complete all as specified and directed. | 1.75 | Cum | |
29 | 29 | M & L for RCC 1:1.5:3 (nominal mix) using 20mm graded aggregates as in slab supported on walls complete all as specified and directed. | 11.13 | Cum | |
30 | 30 | Cutting openings, through brick walls for door, window and other openings or enlarging existing openings, converting window into door openings, etc, or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc 50m . | 0.1 | Cum | |
31 | 31 | Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bounding into old work, also facing, jointing and pointing to match existing work, complete. Cement mortar 1:4. | 3 | Sqm | |
32 | 32 | Making good under cills or over arches, lintels and bres-summers, including all pinning when necessary . | 1 | Sqm | |
33 | 33 | Cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall n.exc one Bk wall and Exc half bk wall complete all as specified. | 9 | Each | |
34 | 34 | M/L for brick work with fly ash old size bricks straight or curved on a plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. | 119.4 | Cum | |
35 | 35 | M/L for brick work with fly ash old size bricks straight or curved on a plan exc 6m mean radius in half brick thick wall built in CM (1:4) including WPC as per manufacturer instruction complete all as specified and directed. | 61.5 | Sqm | |
36 | 36 | Form work to soffits of chajja and similar work including edges complete for rough finished surface all as specified and directed. | 10.5 | Sqm | |
37 | 37 | Formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams, etc complete for rough finished surface all as specified and directed. | 16.75 | Sqm | |
38 | 38 | Form work to soffits of suspended slabs such as floor slab, roof slab ,landing slab and similar work n exc 200mm thick including edges complete for rough finished surfaceall as specified and directed. | 38.75 | Sqm | |
39 | 39 | M&L for mild steel deformed TMT bars 10mm dia and over (as in reinforcement) cut to length, bent to shape require including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. | 821.25 | Kg | |
40 | 40 | All as per item No 39 herein before but 5 mm dia to 10 mm dia | 463.5 | Kg | |
41 | 41 | All as per item No 39 herein before but as in spacers and stirrups etc. | 414.75 | Kg | |
42 | 42 | M&L for mild steel section as in frame for manhole cover and door chowkhats or steel gate of grade Fe-410-0 or Fe-310-0 including all necessary machine wks i.e. cutting, welding, grinding etc, complete all as specified and directed. | 434.5 | Kg | |
43 | 43 | M&L for mild steel hold fast ,clamp,hook & stay,rung/handle for manhole and similar small articles conforming to Fe-290 Gde-165, complete all as specified and directed. | 143.75 | Kg | |
44 | 44 | S&F powder coated/anodised aluminium frame for doors, windows, ventilators and Partition Etc with one or more rebates including joining cleat for fixing etc complete all as specified. | 32 | Kg | |
45 | 45 | S & F powder coated/aluminium anodised door shutter and aluminium section thickness of 2mm incl necessary joining cleats, glazing clips, rubber neoprene paking, handle 2 nos in each door, hinges/Sliding, arrangement anodised aluminium snap beading screws etc. complete all as specified and as directed. | 7 | Sqm | |
46 | 46 | S & F powder coated/aluminium anodised partition fixed type with out sash bar and aluminium section thickness of 2mm incl necessary joining cleats, glazing clips, rubber neoprene paking,hinges, anodised aluminium snap beading screws etc. complete all as specified and as directed. | 3 | Sqm | |
47 | 47 | M&L 2nd class Hard wood plain fillets. square, rectangular or triangular in section of size n.exc 25 Sqcm, clean sawn, se-cured with screw with wrought joint fixed to walls complete all as specified. | 25 | Rm | |
48 | 48 | S & F 25 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. | 8 | Sqm | |
49 | 49 | S/F of Welded steel wire fabric exc 4 Kg per Sqm fixed to steel members as in grills etc complete all as specified. | 40 | Kg | |
50 | 50 | S & F 35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc fixed to frame and size of frame member of shutters as specified in SSR Part I,section 8, Clause 8.24 (a). | 12.8 | Sqm | |
51 | 51 | S&F of 35mm thick factory made modular designer flush doors, solid core construction, with block board core and prelamination on both sides, complete all as specified and directed. Make : Rajshree / Sintex / Greenlam | 11 | Sqm | |
52 | 52 | S&F Solid PVC door frame of size 50mmx47 mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified in SSR Part-II 2010 section 8. | 46.75 | RM | |
53 | 53 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing | 15 | Sqm | |
54 | 54 | M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. | 4 | Each | |
55 | 55 | S&F 12 mm thick prelaminated particle board, exterior grade prelaminated both side with decorative choice laminated & other side blanancing white lamination and complete all as specified and directed. | 1 | Sqm | |
56 | 56 | M & L for 6.3 mm thick sheet glass, ordinary quality and 50micron solar control film fixed on glass joining cleats, glazing clipsy in square exc. 0.50 sqm in each pane. | 5 | Sqm | |
57 | 57 | S & F 100mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws complete all specified and directed. | 54.5 | Each | |
58 | 58 | S & F mild steel ordinary rat tail rod pattern springs of size 300 mm including roller and roller plate complete. | 9 | Each | |
59 | 59 | S & F 150mm long floor door stopper of Alumonium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor. | 9 | Each | |
60 | 60 | S&F of 100 mm size butt hinges, extruded aluminum alloy with galvanized mild steel pin type B-21 anodized complete all specified and directed | 30 | Each | |
61 | 61 | S&F 200 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. | 10 | Each | |
62 | 62 | S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. | 16.5 | Each | |
63 | 63 | S&F of 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed. (Make : Ashish, Classic) | 20 | Each | |
64 | 64 | S&F of 150mm aluminum handle cast type anodized complete all specified and directed. (Make : Ashish, Classic) | 53 | Each | |
65 | 65 | S/F 75 mm butt hinges medium weight cold rolled mixed steel. | 24 | Each | |
66 | 66 | S/F 150mm mild steel barrel tower bolt stove enameled black. | 4 | Each | |
67 | 67 | S/F 75mm mild steel barrel tower bolt stove enameled black. | 18 | Each | |
68 | 68 | S/F 100mm mild steel pressed handles over type stove enameled. | 12 | Each | |
69 | 69 | S/F 150 mm mild steel pressed handles over type stove enameled. | 4 | Each | |
70 | 70 | S/F mild steel sliding door bolts 300mm plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate two on staple plate. | 1 | Each | |
71 | 71 | M&L for stainless steel curtain rod 25mm dia with caps/lobs and wall mounting bracket cutting in to length required at site complete all as specified and directed by Eng-In-Charge | 53 | Rm | |
72 | 72 | S&F of 125 to 175mm Hat pegs and hook of aluminum body cast type anodized complete all specified and directed. (Make : Ashish, Classic) | 9 | Each | |
73 | 73 | S&F Box type steel Ventilator with 80x40x1.25mm RHS frame with side hung shutters (double shutters for glass and gauze) with out sash bars jointed together with and including grills using 12mm square bars @ 10cm C/C Ref TD No CEBZ/TD/14/ 2011 including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welded complete all as specified and as directed by the Engineer-in-Charge | 3.63 | Sqm | |
74 | 74 | M&L for Non-skid cermaic coloured tiles (mat flooring) Size 300X300X7 to 8mm thick, in each floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete.all as sppecified and directed. | 37.75 | Sqm | |
75 | 75 | M&L for Coloured Glazed ceramic tiles 300x 450 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 10mm thick redering in CM 1:4 on wall complete all as specified and directed.. | 158 | Sqm | |
76 | 76 | M&L flor Jointless Non-skid cermaic tiles 7 to 8mm thick (squre/rectanglar) are of ech tiles 600MMX600MM, in each floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6.complete all as specified and directed | 12.5 | Sqm | |
77 | 77 | All as per item No 76 as above but in skirting including 10mm thick backing coat in CM 1:4 on wall complete all as specified and directed.. | 2.5 | Sqm | |
78 | 78 | M&L for Granite 18/20 mm thick(table rubbed and polished and over including 15mm thick screed bed in CM 1:6 as in window cills, counter shelf and like laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including edge moulding complete all as specified and as directed. | 3.38 | Sqm | |
79 | 79 | M&L chequered cement concrete tiles with white cement and pigments of size30cmx30cm x25mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement and over including 20mm thick screed bed or bedding layer with CM 1:6 as in base for laying chequered tiles to match as in foot path etc. | 49.5 | Sqm | |
80 | 80 | M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade with coloured pigment made of PVC moulded (or rubber mould) with vibrating system, with and including 25mm thick sand cushioning, including in CM (1:3) in edges of pavers, complete all as specified and directed. Note : The cost of sand cushion is included in quoted rate. | 71 | Sqm | |
81 | 81 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished fair and smooth without using extra cement complete all as specified and as directed. | 181.5 | Sqm | |
82 | 82 | M&L for rendering in two layers consist of 10 mm thick on fair faces of brick work or concrete surfaces for rough finish in cement mortar 1:6 over 5mm thick on fair faces of plastered surfaces in cement mortar 1:4 with water proofing compound finished fair and even without using extra cement complete all as specified and as directed.Note: water proofing compound shall be measured seprately.\n | 277.5 | Sqm | |
83 | 83 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6(internal ) finished fair and even without using extra cement complete all as specified and as directed. | 152.5 | Sqm | |
84 | 84 | M&L for rendering 5mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed.. | 40 | Sqm | |
85 | 85 | M&L for 10mm thick rendering in CM 1:3 mixed with liquid water proofing solution on roof surfaces when concrete become green ,finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.\nNote:-liquid water proofing solution shall be provided in 150ml in 50 Kg of Cement by weight and cost of liquid water proofing solution measured and paid seperate item. | 48.75 | Sqm | |
86 | 86 | M&L of water proofing treatment to non-accessible roof slab with APP based modified polymeric membrane centre core 100mm micron HMHDPE outer film 20 micron each having thickness 3mm weight not less than 3kg/Sqm as per manufacturer’s instructions with torch applicationcomplete all as specified and directed by Engineer-in-Charge with following course of description below:-\n(a)Firstst coat apply Bituminous primer confirming to IS -3384 of 1965 @ 0.4kg /sqm to be applied on prepared roof surface till the surface is properly inpregnated.\n(b)Second coat of bonding material using blown bitumen confirming to IS-702 of grade 85/25 @ 1.2kg/Sqm\n (c) Third course of laying of APP based modified polymeric membrane with 100 mm overlap in longitudinal direction , 150mm in tranverse direction and edges to be taken up to vertical wall of 20 cm height inserted into the vertical wall concealed the joint with bitumen sealent . All joints and changes in all direction should be covered with cement mortar 1:3 mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane .\n(c) Fourth course of Apply a coat of bituminous aluminium paint @ 0.20 Kg/Sqm over APP membrance | 46.75 | Sqm | |
87 | 87 | Supply only integral liquid water proofing compound, mixed in CM as per manufacturer instruction, complete all as directed. Make : Dr Fixit LW + Professional or equivalent of Fosroc / Sika | 19.5 | Ltr | |
88 | 88 | M&L for preparation of new plastered surface of ceiling and applying 3 coat of white wash complete all as specified and directed. | 45 | Sqm | |
89 | 89 | M&L for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified and directed | 501.5 | Sqm | |
90 | 90 | Preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 55.5 | Sqm | |
91 | 91 | M & L Preparing New Surfaces of Walls and applying two coats of cement base paint. | 37 | Sqm | |
92 | 92 | M&L for preparation of old wooden surface and applying one coat of synthetic enamel paint complete all as specified. | 45 | Sqm | |
93 | 93 | M&L for preparation of old docorated surface of wall and applying one coat of oil emulsion distemper. | 60 | Sqm | |
94 | 94 | M&L for preparation of New plastered surface of wall and applying two coat of oil emulsion distemper over a coat of primer including a thin layer of Birla white putty to make the smooth surfac completeall as specified. | 44 | Sqm | |
95 | 95 | M&L for preparation of old docorated surface of wall and applying one coat of weather coat emulsion complete all as specified. | 25 | Sqm | |
96 | 96 | M&L for preparation of New plastered surface of wall and applying two coat of weather coat emulsion over a coat of primer omplete all as specified. | 25 | Sqm | |
97 | 97 | Complete removal of exisiting treatment, washing and rubbing of old distempered surfaces and applying two coats of oil bound distember over a coat of primer including apply a thin layer of JK/Birla wall care putty to make the surface to be plain and smooth before primer complete all as specified and as directed. | 82 | Sqm | |
98 | 98 | S&F of Ringfit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, complete all as specified and directed. | 14.5 | RM | |
99 | 99 | S&F of PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as directed. | 25 | RM | |
100 | 100 | S&F of Ringfit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, complete all as specified and directed. | 14.25 | RM | |
101 | 101 | S&F of PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as directed. | 17.5 | RM | |
102 | 102 | S&F 110 mm bore PVC (SWR) bends of any radius, complete all as specified and directed. | 5.75 | Each | |
103 | 103 | S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed. | 6 | Each | |
104 | 104 | S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed. | 9 | Each | |
105 | 105 | S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed. | 8.5 | Each | |
106 | 106 | S&F PVC (SWR) vent cowl 75mm bore, jointing to waste pipe, complete all as specified and directed. | 9 | Each | |
107 | 107 | S&F PVC(SWR) vent cowl 110mm bore, jointing to waste pipe, complete all as specified and directed. | 9 | Each | |
108 | 108 | S&F PVC Nahani/ floor trap of 75 mm outlet, jointing to waste pipe, complete all as specified and directed. | 10 | Each | |
109 | 109 | S&F PVC Gully trap of 125/110 mm outlet, jointing to waste pipe with solvent complete all as specified and directed. | 9 | Each | |
110 | 110 | S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection,complete all as specified and directed. Make : Sintex / Vectus / Supreme | 5 | Each | |
111 | 111 | S&F 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as directed. Make : Prayag / Polytuff / Pearl | 5 | Each | |
112 | 112 | S & F 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. | 8 | Each | |
113 | 113 | M&L for cutting chases,pinning in brick walls for concealed water tubing n.exc 10cm girth and making good facing where required and pointing in CM 1:3 complete all as specified. | 18.75 | Rm | |
114 | 114 | S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors. | 35.5 | RM | |
115 | 115 | S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors. | 16.25 | RM | |
116 | 116 | All as per item No 114 but fixing only | 4.5 | RM | |
117 | 117 | All as per item No 115 but fixing only | 3.43 | RM | |
118 | 118 | S&F Vitreous China oval type wash basin, white, size 550x450mm with rim fixed on granite counter excluding taps, waste chain and plug and porcelain stopper but including brackets, 32mm CP waste copling,including PVC Waste pipe 600mm long complete all as specified and directed Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality). | 9 | Each | |
119 | 119 | Supply & Fix Vitreous China wash down water closet(EWC) including PVC Sheet cover Etc ( Make:- Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality). | 9 | Each | |
120 | 120 | S&F Vitreous china bowl Urinal flat back size 465x355x265mm white with grating and union for discharge pipe excluding flushing cistern and flush pipe) as specified and directed. | 4 | Each | |
121 | 121 | Supply and Fix 10 Litres, PVC, valve less, syphonic action type, Flushing Cistern, low level, white inlet, ball valve, float, chain and pull, and brackets including PTMT PVC connection 600mm long. Make:- Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality). | 9 | Each | |
122 | 122 | S & F 15 mm bore Bib taps, fancy type cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.( Make :- Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality). | 9 | Each | |
123 | 123 | S & F 15 mm bore Bib taps long body fancy type cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.( Make :- Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality). | 10 | Each | |
124 | 124 | S & F15 mm bore stop/angle cock fancy type,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule ( Make :- Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality). | 24 | Each | |
125 | 125 | S&F pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, complete all specified and directed. Make: Hindware/ Cera/ Prayag / Pearl /Parryware. | 9 | Each | |
126 | 126 | S&F SS grating of squre/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc, complete all as directed. Make : Camry / Cera / Parryware / Prayag / Pearl | 10 | Each | |
127 | 127 | S&F PVC connection 450 x 15mm dia PTMT (PVC), complete all as directed. Make : Prayag/ Hindware/ Parryware/Cera/ Pearl. | 25 | Each | |
128 | 128 | S & F 15 mm bore conceald stop cock fancy type,chromium plated with long shank and cup screwed down, screwed for iron pipe or for brass ferrule.Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality). | 1 | Each | |
129 | 129 | S & F Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality). | 1 | Each | |
130 | 130 | S&F Brass CP connection 15mm dia and 45cm long with 2 Nos brass check nuts with washers for geyser, complete all as directed. Make : Prayag/ Hindware/ Parryware/Cera / Pearl | 1 | Each | |
131 | 131 | S & F in repairs 15 mm bore Bib taps, fancy type cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.( Make :- Cera (Ist Quality),Parry ware (super fine), Hindware (Ist Quality). | 35 | Each | |
132 | 132 | Supply and Fix in repair 10 Litres, PVC, valve less, syphonic action type, Flushing Cistern, low level, white inlet, ball valve, float, chain and pull, and brackets including PTMT PVC connection 600mm long. Make:- Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality). | 35 | Each | |
133 | 133 | S & F in repairs 15 mm bore stop/angle cock fancy type,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule ( Make :- Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality). | 35 | Each | |
134 | 134 | S&F in replacement of PVC connection 450 x 15mm dia PTMT (PVC), complete all as directed. Make : Prayag/ Hindware/ Parryware/Cera/ Pearl. | 35 | Each | |
135 | 135 | Supply & Fix in repairs Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests ( Make:- Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality). | 3 | Each | |
136 | 136 | S&F CP Brass Towel Rail 600mm Long fixed with and including chromium plated brass screws | 9 | Each | |
137 | 137 | S&F 600x450mm size and 4mm thick beveled edge looking mirror of selected quality glass, having PVC moulding/beading all around, mounted on 4mm thick PVC board, with and incl fixing accessories, complete all as specified and directed. | 9 | Each | |
138 | 138 | S&F glass wall corner with wall bracket and fixing accessories, complete all as directed. Make : Hindware/ Cera/ Parryware/ Jaquar. | 9 | Each | |
139 | 139 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as directed. Make : Prayag/ Hindware/ Parryware/Cera/Jaquar . | 9 | Each | |
140 | 140 | M&L Salt glazed stoneware (SGSW) drain pipes 150 mm bore laid and jointed on concrete bed, complete including testing etc. all as specified. (Concrete bed shall be measured and paid for separately). | 82.5 | Rm | |
141 | 141 | Extra for forming fair finished channel or drain 30cm girth (inner girth) in cement concrete using extra cement incl forms, moulds, stopped end, etc., | 7 | RM | |
142 | 142 | Cutting into existing manholes for connecting new drains,internal dia of pipe150 mm, making good to pipes and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified. | 3 | Each | |
143 | 143 | Construction of Septic Tank of 25 Users with provn of excavation, in any type of soil, foundation in PCC 1:4:8, walls of fly ash brick masonry with top cover of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCI complete as per TD drawing No CEBZ/TD/76/2011, Sheet No 1/2 & 2/2 complete all as specified. | 4 | Each | |
144 | 144 | Construction of Soakage wells of dia 1.2mtr and 4.5mtr in depth excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2 M dia X 4.5 M effective depth as per TD drawing No CEBZ/TD/76/2011, Sheet No 1/2 & 2/2 complete all as specified. | 4 | Each | |
145 | 145 | Provn of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4 M dia X 4.5 M effective depth as per TD drawing No CEBZ/TD/76/2011, Sheet No 1/2 & 2/2 complete all as specified. | 2 | Each | |
146 | 146 | S&F of pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed. Make : Jindal / Tata / Everest | 670 | Sqm | |
147 | 147 | S&F pre-painted Galvalume Aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength 550 MPa and AZ 150 grade as in ridge of roof covering, fixed with self tapping screws, complete all as specified and directed. Make : Jindal / Tata / Everest | 48 | Sqm | |
148 | 148 | M&L for structural steel Fe-410-W(Gde-E-250) quality B for roof trusses or Sliding gate with frame with neccessary bearing (framed), purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and directed. | 3600 | Kg | |
149 | 149 | S&F flat iron( 40mm x 6mm)as in wind tie for roof includig securing bolts | 100 | Kg | |
150 | 150 | M&L for rolled mild steel Fe-410-W(Gde-E-250) quality A of tee, angle or flat sections) fixed on wall indepently with PCC block for holding the ceiling clamp etc complete all as specified and directed. | 250 | Kg | |
151 | 151 | S&F of exposed frame false ceiling system with GI powder coated grid consisting of interlocking arrangement with main "T" runner of 25mm size, suspended at 600mm C/C with hanging provision in short span supported by 1.5mm dia GI wire from roof slab / truss / MS steel support and Cross "T" runner of 25mm size suspended at 600mm C/C including wall / perimeter runner / channel of 25 mm size with and including 4mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size 595x595mm, duly fixed in ceiling frame work, complete all as specified and directed. | 132 | Sqm | |
152 | 152 | E/M Works | |||
153 | 153 | M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG, with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass /GI screws for mounting switches, sockets, fan regulator, etc. complete all as specified and directed by Engineer-in-Charge for the following points:- \nMake For Conduit : -AKG/ Atul/ Kalinga/Precision/Modi ; Make For Wire : Havells/ Polycab/ Finolex /RPG / V-GUARD /KEI\n | |||
154 | 153.01 | One light point controlled by one switch | 26 | Point | |
155 | 153.02 | One Exhaust fan point controlled by one switch. | 4 | Point | |
156 | 153.03 | One 6A socket point controlled by one switch on same board | 6 | Point | |
157 | 154 | M&L for Circuit/submain wiring alongwith earth wire 2 runs x 4 sqmm + 1 run x 4sqmm with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc complete all as specified and directed by Engineer-in-Charge. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length Make : Havells/ Polycab/ Finolex /RPG / V-GUARD /KEI\n | 110 | Rm | |
158 | 155 | Notes for item No. 153.00 & 154.00\n(i) Quoted rate shall deemed to incude the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint .\n(iii) No cutting shall be done on ceiling for laying PVC conduit for ceiling fan point wiring. | |||
159 | 156 | S&F, Switch piano type, single pole, one way, 6 amps, 240 volts, complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM | 36 | Each | |
160 | 157 | S&F, Socket, two-in-one, 5 pin, 6 Amp, universal type, 240 volts, complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM | 6 | Each | |
161 | 158 | S&F, angle holder, metal cased, bakelite body, 240 volts, complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM | 8 | Each | |
162 | 159 | S&F, Ceiling rose, three terminals, bakelite body, 240 volts, complete all as specified and directed.Make :Havells(Reo) /Goldmedal /SSK /GM | 22 | Each | |
163 | 160 | S & F 7 W White LED retrofit lamp suitable for B-22 holder base with polycarbonate diffuser and aluminium heat sink.Make: Havells / Bajaj / Wipro / Philips /Osram | 8 | Each | |
164 | 161 | Supply and fix LED batten box type with CRCA sheet steel body pre-wired suitable for and including provision of 1x20/22Watt (4 feet) retrofit LED tube with PC body and connecting up with twisted three core flexible copper wire of 0.5sqmm white white colour from ceiling rose to connector of fitting complete all as specified and directed by Engineer-in-Charge.Make: Havells / Bajaj / Wipro / Philips /Osram | 10 | Each | |
165 | 162 | Supply and fix LED batten 9W/10W (2 Feet) complete with polycarbonate diffuser and built in with electronic driver including connecting up with twin core twisted flexible copper conductor cable white colour form ceiling rose to connector of fitting complete all as specified and directed by Engineer-in-Charge.Make: Havells / Bajaj / Wipro / Philips /Osram | 4 | Each | |
166 | 163 | Supply and fix LED building security light fitting 25 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx5mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable 0.5 sqmm white colour from ceiling rose to connector of fitting complete all as specified and as directed by Engineer-in-Charge. Make: Havells / Bajaj / Wipro / Philips /Osram | 4 | Each | |
167 | 164 | Supply and fix MCB distribution board, SPN, 4 way 230 Volt in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge. Note: MCBs shall be measured and paid separetely. Make : Indo Asian / L&T / Havells | 6 | Each | |
168 | 165 | S& F MCB SPN 40 Amp, 10 KA, 'C' curve, 230 V, 50 Hz Make : Indo Asian / L&T / Havells | 6 | Each | |
169 | 166 | S& F MCB SP 6-32 Amp, 10 KA, 'C' curve, 230 V, 50 Hz Make : Indo Asian / L&T / Havells | 20 | Each | |
170 | 167 | Supply and fix in replacement of ventilating fan with plastic body with louvers, 250mm sweep, single phase, 230 volts, 50 Hz. complete all as specified and directed. \nMake: Bajaj / Crompton / Polar / Havells / Khaitan / Orient | 4 | Each | |
171 | 168 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed, 16 sq mm 2 core in service connections as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc complete all as specified and directed. Make: Havells /Polycab /Univarsal/Gloster/Asian Cable/RPG | 60 | RM | |
172 | 169 | Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge. Make: Finolex / Kisan / Prince / Tirupati /Supreme / Jain Irrigation Sys | 50 | RM | |
173 | 170 | M&L for Earthing complete with galvanised iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to GI wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by 15mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electircal plate No. 3 of SSR Part-I(2009) and testing on completion complete all as specified and directed. Note :- The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh,protection pipe, earth wire upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II. | 1 | Each | |
174 | 171 | M&L for Tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 25mm bor:- Make: Tata / Jindal / Zenit / Prakash Surya | 60 | RM | |
175 | 172 | Supply and fix in replacement of Gun-metal, gate valves, with iron wheel head, screwed both ends for iron pipe ov sizes 25mm and fixed complete all as specified and directed. Make : Zoloto / Leader / Neta / Sant | 4 | Each | |
176 | 173 | Cutting and screwing of existing steel tubing for alterations or additions of size 40 or 50 mm done in position without taking down and inserting tee branch connection complete all specified and directed by Engineer-in- charge. | 4 | Each Job |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail