Purchase Of Iron And Raw Materials, MNIT Jaipur-Rajasthan

Purchase Of Iron And Raw Materials - 1 M.S. Sections 145 X 82 X 4.8 Mm – 6 Mtr X 40 Nos 2 M.S. Sections 80 X 40 X 3.2Mm – 6 Mtr X 20 Nos 3 M.S. Foundation Bolts – 25 Mm Dia – 1000 Mm Long -90Nos + Nuts – 140 Nos, En 8 Grade Steel 4 Enamel Paint – 40 Ltr + Red Oxide Primer – 40 Ltrs- Smoke Gray 5 Ppgl 0.50Mm , Az70, Roof Sheets, 6.70 Mtr Long, Blue Colour 6 Corroshild Screws, Sds, 12 X 55 Mm 7 Ridge Sheets, 0.45 Mm X 0.60 Mtr – 4 Mtr Long , Blue Colour 8 M.S. Sag Rods 12Mm Dia, 1.25 Mtr Long, With 4 Nos Nuts Each, - 100 Nos 9 G.I. Sheet 18 Guage Thk, 8’ X 4’, 10 No, S 10 Cement Bags. ( Opc 43 Grade ) , Ultratech / Jk / Acc 11 Sand, Good Quality 12 Aggregate 10 Mm, Good Quality 13 Aggregate 20 Mm, Good Quality 14 Aggregate 40 Mm, Good Quality 15 Tmt Bar 16 Mm, Tata, Sail And Equivalent 16 Tmt Bar 12 Mm, Tata, Sail And Equivalent 17 Tmt Bar 8 Mm, Tata, Sail And Equivalent 18 Binding Wires 19 Stone For Foundation Work 20 Brick ( A Class ) 21 Exterior Emulsion ( White ) , Asian Ace ( Advance ) Or Berger Paint Walmasta Antifungal Exterior Emulsion Or Nippon Paint 22 Exterior Wall Primer ( Water Primer ) , Asian Paints Or Equilent 23 Wall Putty ( J.K., Birla ) 24 Providing 1Mm Thick M.S. Sheet Sliding-Shutters With Frame & Diagonals Braces Of 40 X 40 X 6Mm. Angle Iron 3Mm M.S. Gusset Plates At The Junction And Corners, 25Mm Dia Pulley 40X40x6mm Angle And T-Iron Guide At The Top And Bottom Respectively Including Applying A Priming Coat Of Approved Steel Primer. 25 Providing Steel Glazed Windows And Ventilator Shutters Of Standard Rolled Steel Section ( Is 1038-1983 ) Joints Mitred And Welded With Steel Lugs 13X3mm, 10Cm. Long 25A Partly Fixed And Partly Openable [ Fixed Area Not To Exceed 33% ] 25B Windows Side Hung / Ventilators Top Or Centre Hung ( Openable )

Refer document

INR 38000.0 /-

INR 18.53 Lakhs /-