Military Engineer Services-MES has published Provision Of Meat Cutting Room And Lpg Store And Ksp Main Gate And 01 X Toilet Block With Septic Tank Near Bldg No T-38 ( Or Living Accn ) And Rain Shed At Mt Area And Rain Shed In Front Of Main Gate And Special Repairs To Bldg No T-120 And Allied And . Submission Date for this Tender is 22-01-2021. Building Work Tenders in AIZAWL Mizoram. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-Jan-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-01-2021 |
| PROVN OF MEAT CUTTING ROOM AND LPG STORE AND KSP MAIN GATE AND 01 X TOILET BLCK WITH SEPTIC TANK NEAR BLDG NO T-38 (OR LIVING ACCN) AND RAIN SHED AT MT AREA AND RAIN SHED IN FRONT OF MAIN GATE AND SPECIAL REPAIRS TO BLDG NO T-120 AND ALLIED AND MINOR WORKS AT AIZAWL UNDER GE SILCHAR | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | PART-I (B/R WORKS)\nSurface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed. | 69.5 | Sqm | |
| 2 | 2 | Excavation in trenches n. exc 1.5m wide and 1.5m in deep and getting out in hard/dense soil etc including trimming bottom and sides of trenches, levelling / grandient / slopes and ramming bottom of trenches complete all as specified and directed. | 32.25 | Cum | |
| 3 | 3 | Excavation in post holes (or similar holes) each n exc 0.5 Cum getting out soft/ disintegrated rock returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and makind good surface complete all as specified and directed. | 26 | Each | |
| 4 | 4 | Returning, filling in trenches including spreading, leveling watering and ramming in layers not exceeding 25cm complete all as specified and directed. | 15.9 | Cum | |
| 5 | 5 | Removing of surplus soil not exceeding 50 m and deposited where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed. | 16.35 | Cum | |
| 6 | 6 | Material and labour for providing hardcore of broken stone of gauge not exc. 63 mm deposited, spread and leveled in layers not exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed. | 20.6 | Cum | |
| 7 | 7 | Taking down chowkhats or frame not exceeding 1.5 sqm each with shutters (without taking off shutters from frame) complete all as specified and directed. | 8 | Each | |
| 8 | 8 | Taking down chowkhats or frame exceeding 1.5 sqm but not exceeding 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. | 2 | Each | |
| 9 | 9 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness as in roof coverings, chajja, wall clading and the like complete all as specified and directed | 101.6 | Sqm | |
| 10 | 10 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed. | 19.15 | Qtl | |
| 11 | 11 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. | 72 | Sqm | |
| 12 | 12 | Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but exluding ashlars facings, dressed stone work and pre-cast concrete articles complete all as specified and directed | 20.43 | Cum | |
| 13 | 13 | Dismantling wall and ceiling boards (fibre, pulb, insulation etc) or insulation boards slabs/blankets any thickness including cover fillets all as specified and directed. | 120 | Sqm | |
| 14 | 14 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed | 15.08 | Cum | |
| 15 | 15 | Demolition of reinforced cement concerete of any description and in any position not otherwise specifically (reinforcement cut\nas required to facilitate demolition) complete all as specified and directed. | 6.25 | Cum | |
| 16 | 16 | Material and labour for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed. | 7.55 | Cum | |
| 17 | 17 | Material and labour for PCC 1:2:4 type B2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed. | 3.8 | Cum | |
| 18 | 18 | M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid in alternate panels and joints filled with bituminous 1 part and 3 part of sand complete all as specified and directed. | 56.5 | Sqm | |
| 19 | 19 | Material and labour 100 mm thick cement concrete 1:4:8 type D2 using 40 mm graded aggregate in subbase of floor complete all as specified and directed. | 78.6 | Sqm | |
| 20 | 20 | Material and labour 25 mm thick cement concrete 1:2:4 type B0 using 12.5 mm graded aggregate in floors finished even & fair complete all as specified and directed. | 78.6 | Sqm | |
| 21 | 21 | Material and labour 50 mm thick cement concrete 1:2:4 type B2 using 40 mm graded aggregate in floors finished even & smooth without using extra cement complete all as specified and directed. | 65.5 | Sqm | |
| 22 | 22 | M& L for providing 150mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone agg) as in sub-base of floor complete all as specified and directed. | 32 | Sqm | |
| 23 | 23 | M& L for providing plain cement concrete 1:2:4 type B-2 (using 40mm graded stone agg) as in 100mm thick floor / hardstanding finished even & fair complete all as specified and directed. | 89 | Sqm | |
| 24 | 24 | Forming construciton joint 30cm deep and 10mm wide filled with sealing compound grade A etc complete all as specified and directed. | 55 | RM | |
| 25 | 25 | M&L Plain cement concrete 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in bed blocks, hold fast Block, lintel upto 1.5 mtr clear span, coping, cills, steps, kneelers, bed plates, apex stones kerbs benching and similar work including necessary form work complete all as specified and directed. | 0.55 | Cum | |
| 26 | 26 | M&L for RCC 1:2:4 type B-1 (20 mm graded aggregate), as in precast cover slab including necessary formwork jointed & set in cement mortar 1:4 complete all as specified and directed. | 0.25 | Cum | |
| 27 | 27 | M & L for Reinforced cement concrete Design mix (M-25) using 20 mm graded aggregate in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and directed. | 7.9 | Cum | |
| 28 | 28 | M&L RCC Design mix (M-25) using 20 mm graded aggregate in columns, pilars, piers, posts and struts complete all as specified and directed. | 3.35 | Cum | |
| 29 | 29 | M&L RCC Design mix (M-25) using 20 mm graded aggregate in beams, cantilevers, bressummers, lintels over 1.50 mtr span complete all as specified and directed. | 1.35 | Cum | |
| 30 | 30 | M&L for RCC Design mix (M-25) (20 mm graded aggregate) as in chajjas complete all as specified and directed. | 1.1 | Cum | |
| 31 | 31 | M&L for RCC Design mix (M-25) (20 mm graded aggregate) as in slab supported on walls, beam and column landing, roof, balcony, canopy, deck slabs, shelves and similar work for water retaining structure complete all as specified and directed. | 0.25 | Cum | |
| 32 | 32 | M&L for cement concrete 1:2:4 type B-2 in surface channel and drain including formwork, complete all as specified and directed. | 1.5 | Cum | |
| 33 | 33 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed. | 45 | RM | |
| 34 | 34 | Material and labour for form work to sides of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter for rough finished flat surface of concrete complete all as specified and directed. | 76.2 | Sqm | |
| 35 | 35 | Material and labour for form work to sides of columns, pillars, posts, struts, piers and stanchions, rectangular or square for rough finished flat surfaces of concrete complete all as specified and directed. | 62.4 | Sqm | |
| 36 | 36 | Material and labour for formwork to suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or slopping) for rough finished flat surfaces of concrete complete all as specified and directed. | 8.9 | Sqm | |
| 37 | 37 | Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for rough finished flat surfaces of concrete complete all as specified and directed. | 31.1 | Sqm | |
| 38 | 38 | Use and waste of form work to chullah hoods, chajjas, shelves troughs and similar items including edges, for rough finished flat surfaces of concrete complete all as specified and directed. | 16.3 | Sqm | |
| 39 | 39 | Material and labour for mild steel TMT bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or secruing with clips complete all as specified and directed | 1075 | Kg | |
| 40 | 40 | All as per item No. 39 above but 6mm to 8 mm dia complete all as specified and directed | 480 | Kg | |
| 41 | 41 | All as per item No. 39 above but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders etc complete all as specified and directed | 460 | Kg | |
| 42 | 42 | Supply and fix Steel work in trusses, purlins, posts and the like using tubular/ square hollow sections including special shaped washer etc. complete using ERW or induction butt welded tubes/SHS conforming to IS.1161 - 2014 / IS.4923 - 1997 grade St.-240 complete all as specified and directed. | 1905 | Kg | |
| 43 | 43 | Supply and fix mild steel sheet 1.60 mm thick in door shutter, convering to door frams etc with welding including bending, turning up mitred angle etc complete all as specified and directed. | 12.6 | Sqm | |
| 44 | 44 | S&F Mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each exc 10 cm but n.exc 15 cm long, dia 11 to 15mm necessary fitting complete all as specified and directed. | 27.5 | Kg | |
| 45 | 45 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. | 185 | Kg | |
| 46 | 46 | S&F Rolled Mild Steel Fe 410 -W (Gde- E- 250) quality- A in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified and directed. | 90 | Kg | |
| 47 | 47 | S&F for Pre-painted galvaume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. | 249.4 | Sqm | |
| 48 | 48 | S&F for Pre-painted galvaume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa asridger, hip, valley, gutters, drop & straight flashing fixed with self tapping screws complete all as specified and directed. | 10.9 | Sqm | |
| 49 | 49 | S&F plates (plain or chequered) channels, square cut or notched (ordinay and counter sunk) forming holes, without any attachment of Fe 410W (Gde-E -250) Quality 'A' complete all as specified and directed. | 211 | Kg | |
| 50 | 50 | M & L for brickwork with subclass 'B' or locally available best quality old size bricks, straight or curved on plan exceeding 6 mtr mean raduis, built in CM (1:6) complete all as specified and directed. | 15.6 | Cum | |
| 51 | 51 | M & L for brickwork with subclass 'B' or locally available best quality old size bricks, straight or curved on plan to any raduis, built in CM (1:4) as in half brick thick wall complete all as specified and directed. | 209 | Sqm | |
| 52 | 52 | Material and labour for rendering 15 mm thick in cement mortar(1:6) to other side of lathing finished the surfaces even and fair complete all as specified and directed. | 197.5 | Sqm | |
| 53 | 53 | M&L rendering 15 mm thick cement plaster in two layer (10+5 mm thick) on fair faces of brick wall or concrete surfaces in CM (1:4) incl water proofing compound mixed with second layer 3% finished even and fair using extra cement complete all as specified and directed.\nNote -WPC shall be measured and paid separetly. | 294.8 | Sqm | |
| 54 | 54 | Material and labour for 15mm thick screed bed or bedding layers of (1:4) cement mortar for floor finishes complete all as specified and directed. | 136.8 | Sqm | |
| 55 | 55 | S&F Mild steel sheet eaves gutters gutters galvanised class 3 half round with rounded edges with thickness of sheet is 1.0mm (dia 150 mm) complete all as specified and directed. | 12 | RM | |
| 56 | 56 | Material and labour for 10mm thick screed bed or bedding layers in cm( 1:4) for vertical faces of walls complete all as specified and directed. | 31.5 | Sqm | |
| 57 | 57 | Material and labour for reflective type rubber moulded chequered cement concrete tiles 300x300x25mm etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match the tile complete all as specified and directed. | 44 | Sqm | |
| 58 | 58 | M & L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour tiles complete all as specified and directed. | 72 | Sqm | |
| 59 | 59 | M & L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour tiles complete all as specified and directed. | 20.8 | Sqm | |
| 60 | 60 | M & L for coloured glazed ceramic tiles (300x200) 7mm thick on vertical surface such as skirting, dados, risers etc. set and jointed in neat cement slurry and pointed in white -or -coloured cement to match colour tiles complete all as specified and directed. | 31.5 | Sqm | |
| 61 | 61 | Supply only Integral water proofing compound complete all as specified and directed. | 18.3 | Kg | |
| 62 | 62 | M&L for pre-painted designer false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure Non Asbestos Fibre Cement prepainted decorative Board (E-Board Classic) in a grid of GI system duly suspended with 4mm dia GI bar hanger fixed with steel dash fasteners or iron purline from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall, Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c, so as to form 600mm x 600 mm grid and painted with two coats of acrylic emulsion paint of approved shed /make over a coat of cement primer before installing it on the grid complete all as specified and directed. \nMake: Armstrong / Saint Gobain (Gyproc) / Everest or equivalent as per IS 14862. | 47 | Sqm | |
| 63 | 63 | S&F 01 mm thick mild steel sheet eaves gutters, galvanised class 3, half round with 150 mm dia rounded edges complete all as specified and directed. | 22 | RM | |
| 64 | 64 | S&F 20mm dia Harrison rail mild steel, chromium plated curtain rods with brackets, including fixing stops, rollers bracket & side end cap fancy type complete all as specified and directed. | 15 | RM | |
| 65 | 65 | S&F Pressed steel frames of sizes 165 mm x 60 mm x 1.25 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specifed and directed. | 48 | RM | |
| 66 | 66 | S&F for 30mm thick Flush shutters solid core constuction with block board core and two face is covered with decorative face veneer with lipping / frame to match complete all as specifed and directed. | 4.9 | Sqm | |
| 67 | 67 | S&F steel ventilaor with top hung shutter including hinges steel peg stay, complete all as specifed and directed. | 8.2 | Sqm | |
| 68 | 68 | S&F 2nd class hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc,sizes of members of shutters as specified in SSR part I, Section 8, clause 8.24 (a), fitted to chowkat etc complete all as specifed and directed. | 4.9 | Sqm | |
| 69 | 69 | S&F 2nd class hard wood, 30 mm thick, glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided in to squares, with plain chamfered or rounded, mitered and rebated sash bars sizes of members of shutters as specified in SSR part I, Section 8, Clause No 8.20 (b) and fitted to chowkat etc complete all as specifed and directed | 21.2 | Sqm | |
| 70 | 70 | S & F for Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. | 9 | RM | |
| 71 | 71 | Provn of one decorative type cast iron gate with decorative type grills / balustar / bars of cast iron moulded type with outer frame of shutters soild square bars not less than 40mm x 40mm double leaf type cente portion raised with MS pindle hinges 3 Nos on each sides brass poilshed aldrop bolt mild steel lower bolts two numbers at bottom, entire shutter errected in proper position to have a smooth working incl applying two coats of matt finish enamel paint to all exposed complete all as specified and directed. | 340 | KG | |
| 72 | 72 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) unsing marble dust with admixture of pigment to match with shade of granite, etc.complete all as specified and directed. | 7.4 | Sqm | |
| 73 | 73 | M&L for 10mm thick rendering of cement morter 1:3to receive tiles in vertical surfaces complete all as specified and directed. | 7.4 | Sqm | |
| 74 | 74 | Supply and fix Factory Made Solid Panel PVC Door Shutter, 30mm thick (stiles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat strips of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, and fixed in the frame at site all as per specification & drawing complete all as specified and directed. | 2.6 | Sqm | |
| 75 | 75 | S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed. | 4.8 | Sqm | |
| 76 | 76 | S&F Aluminium handle cast type anodise of 150 mm size complete all as specified and directed. | 40 | Each | |
| 77 | 77 | S&F Aluminium handle cast type anodise of 100 mm size complete all as specified and directed. | 4 | Each | |
| 78 | 78 | S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. | 12 | Each | |
| 79 | 79 | S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. | 48 | Each | |
| 80 | 80 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed complete all as specified and directed. | 9.5 | Sqm | |
| 81 | 81 | Aluminium sliding door bolt, 300 mm, plate type, stove enameled black, with bright bolt not less than 12 mm dia, with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and directed. | 2 | Each | |
| 82 | 82 | S&F 100mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. | 6 | Each | |
| 83 | 83 | S&F for 20mm bore tube medium grade galvanized with all fitting and fixed to wall, ceiling or laid in floor or trenches complete all as specified and directed. | 5 | RM | |
| 84 | 84 | S&F for 15mm bore tube medium grade galvanized with all fitting and fixed to wall, ceiling or laid in floor or trenches complete all as specified and directed. | 7 | RM | |
| 85 | 85 | S&F Vitreous China squatting pan, Orissa pattern, size 580x440 mm white with integral foot rest (excluding flushing cistern and flushpipe) including provision of cement concret bedding complete all as specified and directed. | 1 | Each | |
| 86 | 86 | S&F vitreous china wash basin, white flat back of size 550x400mm including CI brackets, waste coupling, waste pipe of 32 mm dia low density polythelens (LDPE) pipes of pressure rating 4 KG/Qm cm, brass CP pillar tap 15mm screwed down high pressure, PTMT bottle trap, pvc supply pipe 15mm from stop valve complete all as specified and directed. | 1 | Each Job | |
| 87 | 87 | Supply and fix PVC 10 ltrs capacity valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flash pipe of polythylene of low or high density or PVC pipe 32 mm dia complete all as specified and directed. | 1 | Each | |
| 88 | 88 | S&F of 600mmx450mm looking mirror of selected quality glass mounted on 6mm thick of commercial plywood and PVC mouldings frame fancy type complete all as specified and directed. | 5 | Each | |
| 89 | 89 | S & F for 15 mm bore Stop valves, cast tcopper alloy, chromium plated, screwed down,high pressure, with fency handle, screwed both ends for iron pipe or for unions & fixed complete all as specified and directed. | 4 | Each | |
| 90 | 90 | S&F 15mm bore Bib taps chromium plated cast copper alloy, screwed down, fancy type, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. | 3 | Each | |
| 91 | 91 | S&F for PVC connection 15mm dia 600mm long complete all as specified and directed. | 2 | Each | |
| 92 | 92 | S&F Tubular Towel rail 20mm dia 600mm long of chromium plated fixed with brass screws and wooden/ plastic cleats complete all as specified and directed. | 1 | Each | |
| 93 | 93 | S&F 110mm bore PVC pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. | 5 | RM | |
| 94 | 94 | S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed. | 1 | Each | |
| 95 | 95 | S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed. | 1 | Each | |
| 96 | 96 | S&F 110 mm bore PVC(SWR) S trap complete all as specified and directed. | 1 | Each | |
| 97 | 97 | S&F 110 mm PVC (SWR) WC connector with lip ring complete all as specified and directed. | 1 | Each | |
| 98 | 98 | M&L for two coats synthetic enamel paint over one coat of red oxide primer on surfaces of any description not otherwise described over 10 cm including preparation of new or previously untreated steel or iron surface complete all as specified and directed. | 138.5 | Sqm | |
| 99 | 99 | Preparation of new or untreated surfaces of wood or wood based surfaces of any description exc.10 cm. in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. | 25 | Sqm | |
| 100 | 100 | M&L for preparation of wood base surfaces of any description over 10cm in width or girth and applying two coats of varnish over one coat of oil based stainer complete all as specified and directed. | 6 | Sqm | |
| 101 | 101 | M&L for preparation walls and appling two coats of exterior weather coats over one coat of external primer (as per manufacturers instuction) (Appex Ultima) of M/s Assian make or equivalent of M/s Berger, M/s Shlimar, M/s Nerolac complete all as specified and directed. | 90 | Sqm | |
| 102 | 102 | M&L for applying two coats of cement base paint over one coat of primer on plastered surfaces of walls including prepation of new or previously untreated surfaces complete all as specified and directed. | 148 | Sqm | |
| 103 | 103 | M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. | 99.7 | Sqm | |
| 104 | 104 | Material and labour for preparation of newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer over & incl 3mm thick putty all as specified and directed. | 65 | Sqm | |
| 105 | 105 | PART-II (E/M WORKS)\nTaking down carefully copper/aluminum existing point wiring (light/fan/socket or power points) complete incl wooden battens/casing capping or conduit etc (without disturbing existing fittings point wiring etc) and all connected fittings such as switch, socket, ceiling rose, lamp holder, brackets ceiling fittings, bulk head fittings and fan regulator etc and making good to disturbed surfaces of wall floor etc complete all as specified and directed. | 28 | Point | |
| 106 | 106 | Dismantling/opening ceiling fan/Exhaust fan and rdepositing to MES yard complete all as specified and directed. | 4 | Each Job | |
| 107 | 107 | Dismantling of old unserviceable main switches DBs, MCB enclosures, electric meter, PVC rectangular blocks etc and keeping in safe custody either for reuse or for disposal Including making good to the disturbed surface of wall complete all as specified and directed. | 1 | Each | |
| 108 | 108 | M&L for Point wiring using FRLSH PVC insulated unsheathed multi stranded copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLSH PVC insulated unsheathed multi stranded copper conductor earth wire drawn through and including concealed stove enamelled steel conduit medium grade ISI marked of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box , MS / pressed steel terminal boxes duly painted with black bituminious black paint internally & externally of suitable size for, connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc for one light/fan/bell point complete all as specified and directed.\n | 5 | Point | |
| 109 | 109 | M&L for Point wiring using FRLSH PVC insulated unsheathed multi stranded copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLSH PVC insulated unsheathed multi stranded copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box , MS / pressed steel terminal boxes duly painted with black bituminious black paint internally & externally of suitable size for, connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc for one light/fan/bell point complete all as specified and directed.\n | 38 | Point | |
| 110 | 110 | All as per Srl item No 109 above but for One 5 pin 5 Amp switch socket out let point on an independent board. | 8 | Point | |
| 111 | 111 | All as per Srl item No 109 above but for One 5 pin 5 Amp socket out let point controlled by one switch on same board. | 4 | Point | |
| 112 | 112 | All as per item No. 109 above but for one 15 Amp 5/6 Pin switch socket outlet independent with 2.5 Sqmm FRLSH unsheathed copper conductor single core multistranded complete all as specified and directed. | 5 | Point | |
| 113 | 113 | All as per item No. 109 above but for one 15 Amp 5/6 Pin switch socket outlet independent with 4.0 Sqmm FRLSH unsheathed copper conductor single core multistranded with 2.5 sqmm earth contunity wire complete all as specified and directed. | 2 | Point | |
| 114 | 114 | S&F switch piano flush type 5 Amp one way complete all as specified and directed. | 44 | Each | |
| 115 | 115 | S&F socket outlet flush type 5 Amp 6 Pin complete all as specified and directed. | 4 | Each | |
| 116 | 116 | S&F switch socket combination 2 in one, 5 Amp flush type 5/6 pin complete all as specified and directed. | 6 | Each | |
| 117 | 117 | S&F switch socket combination 2 in one 6 pin 5/15 Amp flush type complete all as specified and directed. | 7 | Each | |
| 118 | 118 | S&F ceiling rose surface type bakelite 65x20mm two to three terminals AC, 230V, 50HZ complete all as specified and directed. | 31 | Each | |
| 119 | 119 | Supply and fix ceiling fan regulator socketed, step type, flush type heavy duty suitable to work on 230 volts Ac supply complete all as specified. | 5 | Each | |
| 120 | 120 | S&F lamp holder, PVC/Polycarbonate type insulated body with back plate batten/angle type for batten fittings with 9 watt LED lamp complete all as specified and directed. | 8 | Each | |
| 121 | 121 | S & F LED linear light fittings 20 Watt basic all purpose surface and wall mounted and LED batten with polycarbonate housing and intrigated electronic driver and connecting with 3 core flexible copper cable PVC insulated of size 16/0.20 mm etc complete all as specified and directed. \nMake:- Havells Cat No. LHEWEBP7IN1W020 or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/Crompton Greaves | 14 | Each | |
| 122 | 122 | Supply and fix LED panel light size 2 x 2 designed by using latest technology, 26 watt, IP20 rating 180-220 volt cast colour for edge-lit illumination, recess/surface mounted aestherically designed for soft light and glare including accessories internally pre-wired suitable for surface ceiling/Recessed mouniting type including making connections with the existing supply complete all as specified and directed. \nMake:- Havells Cat No. ENDURASLIMPROPLUS2X2PLR28/ 36WLE D840MOD or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/ M/S Jaquar & Company Pvt Ltd/Crompton Greaves | 2 | Each | |
| 123 | 123 | Supply and fix Decorative bracket light fittings type, insulated with polycarbonate body and back plate housed with porcelain base suitable for LED lamp complete all as specified and directed. \n | 4 | Each | |
| 124 | 124 | Supply and fix Flameproof LED tube light fixture for 1 piece Tube light, EXTN1LT8-16/20 is fitting etc complete all as specified and directed. \n | 3 | Each | |
| 125 | 125 | S & F LED Bldg Security light fitting of 25 watt fixed on & incl MS bracket, made out of 40 mm bore medium grade GI pipe 1.5 mtr long with MS clamps and nut bolts of suitable size complete all as specified and directed. \nMake:- Havells Cat No. ENDURAPEARLSL25WLED 757SASYTOPC or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/ M/S Jaquar & Company Pvt Ltd/Crompton Greaves | 6 | Job | |
| 126 | 126 | Supply and fix sheet metal enclosure for DB's SPN with 200 Amps rated bus bar 240Volts, 08 way double door etc complete all as specified and directed. | 1 | Each | |
| 127 | 127 | Supply and fix sheet metal enclosure for DB's SPN with 200 Amps rated bus bar 240Volts, 04 way double door etc complete all as specified and directed. | 4 | Each | |
| 128 | 128 | Sheet metal MCB DB TPN 4 Way Double Door type 415 volt powder coated with bus bar neutral link, earth bar & din rail complete, including fixing of MCB/ISOLATOR/RCBO etc complete all as specified and directed.\n | 1 | Each | |
| 129 | 129 | Supply and fix MCB SPN 5 to 32 Amps 240 Volts 'C' series complete all as specified and directed. | 5 | Each | |
| 130 | 130 | Supply and fix MCB TPN 32 Amps 240 Volts 'C' series complete all as specified and directed. | 1 | Each | |
| 131 | 131 | Supply and fix MCB SP 5 to 32 Amps 240 Volts 'C' series complete all as specified and directed. | 26 | Each | |
| 132 | 132 | Supply and fix ceiling fan complete with all accessories 230 V, 1200 mm sweep. BEE 5 star rated with regulator including necessary connection of flexible copper cable from ceiling rose complete all as specified and directed.\n | 3 | Each | |
| 133 | 133 | S & F plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep , BEE 5 star rated with louvers including necessary connection of flexible copper cable from ceiling rose complete all as specified and directed.\nMake:- Havells 250mm Crisp Air LX or equivalent make of Crompton Greaves/ Khaitan/Bajaj/Orient | 8 | Each | |
| 134 | 134 | S & F plastic body exhaust fan, AC single phase, 240 V of size 200 mm sweep, BEE 5 star rated with louvers including necessary connection of flexible copper cable from ceiling rose complete all as specified and directed.\nMake:- Havells 200mm Crisp Air LX or equivalent make of Crompton Greaves/ Khaitan/Bajaj/Orient | 10 | Each | |
| 135 | 135 | Supply and fixing fresh Air fan heavy duty of 200 mm sweep 1200 RPM, BEE 5 star rated complete all as specified and directed. | 4 | Each | |
| 136 | 136 | Supply and fix Geyser (water storage heater) of capacity 15 ltr, 5 star rating with 2KW heating element including fixing on the wall with 12 mm dia x 100 mm long GI fastner, nut and bolt by grouting at required position including testing on completion including making all necessary water supply and electric supply connections to water Geyser from existing point and also inclusive of making good to distrubed surface with existing surface incl 02 Nos PVC connections 15 mm bore 450 mm long with brass union at both ends complete all as specified and directed. \n | 5 | Each Job | |
| 137 | 137 | Supply, installation, commissioning of frost free double door refrigerator of capacity 320 ltr , 5 star rating with 05 year compressor warrantee with twin inverter technology which ensure that the compressor and fan run at different speeds, annual energy consumption 270 unit per year complete all as specified and directed. \n\n | 1 | Each | |
| 138 | 138 | Supply and install voltage stablizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 volt to 250 volt with output voltage stabilized at 230 volt of capacity 1.0 KVA complete all as specified and directed.\n | 1 | Each | |
| 139 | 139 | M & L for sub main wiring with two single core 4 Sqmm PVC insulated unsheathed cable multi-stranded copper conductor FRLSH drawn through and including PVC concealed conduit of suitable size with all fittings and fixing accessories on roof, walls, ceiling etc. including 1x4 Sqmm PVC insulated unsheathed single core multi stranderd copper conductor earth wire FRLSH with proper colour coding complete all as specified and directed.\nNote:- Two run of single core cable and one run earth wire will be measured as one length. | 103 | RM | |
| 140 | 140 | Supply and lay Cable or fixed to wall/floors XLPE insulated,PVC bedded, Galvanised steel strip or wire armoured,Electric power cable heavy duty with stranded alluminium conductors,1100 volt grade 25 Sq mm 4 Core all as specified. | 90 | RM | |
| 141 | 141 | Material and labour for laying of bricks locally available sub-class 'B' brick (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the directon of cable complete all as specified and directed. | 500 | Each | |
| 142 | 142 | Supply and spread sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed.\nNote : Thickness of sand cushion after punning down will be measured and paid. | 3 | Cum | |
| 143 | 143 | Material and Labour GI tube light grade 40mm bore for pretection of UG Cable complete all as specified and directed. | 20 | RM | |
| 144 | 144 | Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 m deep bellow ground level) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia by means of galvanized iron or steel bolts, nuts, check nuts and washers, and connected to equipments as directed, including funnel with GI med grade watering pipe 20 mm bore, wire mesh, charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with concrete pit in PCC 1:3:6 type C1, 50 mm thick pre cast RCC 1:2:4 type B1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar, GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance not exceeding 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES Schedule 2009, Part-I complete all as specified and directed. | 4 | Each Set |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
