Supply And Fixing Of Open Gym Equipment With Platform In Indira Gandhi Municipal Stadium Circle-3 Area In Vmc..- 11.77 Dismantling Old Brick Work including cost and conveyance of all materials and labour charges for removing damaged materials and conveyance the damaged material for away from the site including cleaning the site etc., complete. 18.79 Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308) 2.91 Collection and Supply of Dust for filling including Cost and coneyance charges, Spreading, Sectioning etc., complete. 2.91 Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) 7.45 Plain Cement concrete nominal mix (1:2:4) using 20mm HBG metal including cost and conveyance of all materials, Machine mixing, labour charges for laying vibrating curing etc., upto plinth level but excluding seignorage charges - With Form Work. For pedestals 8.45 Brick Masonry in CM (1:6) with Bricks traditional size 23x11x7 cms 2nd class including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete. 50.80 Plastering for walls in CM (1:4) 12mm thick including cost and conveyance of all materials, labour charges for mixing of mortor watering curing etc. complete. 50.80 Painting with Plastic emulsion paint Grade-I Two coats -Plastered Surface(External Walls) including one prime coat to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS 13.78 Supply and Delivery of Sand from approval Quarry including cost, Seignorage and Conveyance of all materials and Labour charges for stacking, including spreading, Sectioning, watering etc., complete as per ss. BT-3 137.76 Supply, delivery, laying & jointing high strength precast concrete blocks inter locking reflective design (rubber mould) 60mm for paving of M-40 grade and top 10mm thickness shall be for imported color pigmentation with approved colors and white cement to get reflecting as per drawings and technical specification as directed by departmental authorities. 1.00 Sky Walker Double*Dimensions: 1700 mm (L) X 830 mm (W) X 1650 mm (H). Supply, Delivery and Commissioning of SKY WALKER with main frame shall be minimum of 80mm NB dia of thickness not less than 4.50mm & Handle pipes shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of C class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded with Plastic/Rubber grips at handle grip hold. The handle pipes are hinged over 80NB main frame with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Pins should be case hardened and centreless grinded finish for life long durability. The handle pipes shall be further extended to the 32mm NB dia on both sides. Paired rectangular tubes with four foot rests are linked to main frame. Foot rest shall be made of Aluminum material - LM26 grade. Total footrest structure is supported on base frame shall be made up of rectangular pipe of 48 X 48 X 2.9 mm and side frames shall be made up of 32mm NB dia GI Pipes. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick M.S. plate with Kakinada Smart City Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity. 1.00 Air Walker Double*Dimensions: 2115 mm (L) X 390 mm (W) X 1420 mm (H)Supply, Delivery and Commissioning of DOUBLE AIR WALKER with three prime stand pipes shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Pedestal frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Handle frame shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of C class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The two pedestal frames are hinged over 100NB prime stand pipes with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Foot rest shall be made of Aluminum material - LM26 grade.All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with Kakinada Smart City Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity. 1.00 Seated Puller Double **Dimensions: 1740 mm (L) X 740 mm (W) X 1850 mm (H)Supply, Delivery and Commissioning of SEATED PULLER DOUBLE with prime stand pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Handle frame & Seat frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Connecting links shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of C class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The two handle frames are hinged over 100NB prime stand pipe with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Seat & Back rests are made with the GI Sheet of 1.8 mm thickness with dip drawn pressed with uniform bending of 20mm to have free from sharp edges & burrs. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with Kakinada Smart City Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity. 1.00 Chest Press Double*Dimensions: 1600 mm (L) X 710 mm (W) X 2150 mm (H)Supply, Delivery and Commissioning of CHEST PRESS DOUBLE with prime stand pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Handle frame & Seat frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Connecting links shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of C class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The two handle frames are hinged over 100NB prime stand pipe with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Seat & Back rests are made with the GI Sheet of 1.8 mm thickness with dip drawn pressed with uniform bending of 20mm to have free from sharp edges & burrs. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with Kakinada Smart City Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity. 1.00 Cross Trainer*Dimensions:1200 mm (L) X 500 mm (W) X 1500 mm (H)Supply, Delivery and Commissioning of CROSS TRAINER with prime stand pipe shall be minimum of 80mm NB dia of thickness not less than 4.50mm, pedal link pipe shall be minimum of 40mm NB dia of thickness not less than 4.1mm, handle frame pipes shall be minimum of 25mm NB dia of thickness not less than 3.60mm and handle grips shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of C class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The pedal frame are hinged over 80NB prime stand pipe with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Foot rest shall be made of Aluminum material - LM26 grade. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with Vijayawada Municipal Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity. 1.00 Triple Standing Twister*Dimensions: 1570 mm (L) X 1570 mm (W) X 1350 mm (H)Supply, Delivery and Commissioning of STANDING TRIPPLE TWISTER with prime pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Standing twister plate support pipe shall be minimum of 80mm NB dia of thickness not less than 4.5mm, Bottom frame support shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Handle ring shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of C class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The twister plate is hinged over 80NB standing pipe with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with Kakinada Smart City Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity. 1.00 Horse Rider*Dimensions:1000 mm (L) X 695 mm (W) X 1000 mm (H)Supply, Delivery and Commissioning of HORSE RIDER with main frame shall be minimum of 100mm NB dia of thickness not less than 5.00mm, handle frame & Seat frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Connecting link pipes shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of C class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The handle frame are hinged over 100NB main frame with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Seats are made with the GI Sheet of 1.8 mm thickness with dip drawn pressed with uniform bending of 20mm to have free from sharp edges & burrs. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of bearings and bushes shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with Kakinada Smart City Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity. 1.00 Rower*Dimensions : 1200 mm (L) X 1000 mm (W) X 800 mm (H)Supply, Delivery and Commissioning of ROWER with base link pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, upper link pipe shall be minimum of 50mm NB dia of thickness not less than 4.1mm & Connecting links & handle links pipes shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of C class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns ionized coated and zinc dipped joint with robotic welded. The handle frame are hinged over 100NB base link pipe with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Seats are made with the GI Sheet of 1.8 mm thickness with dip drawn pressed with uniform bending of 20mm to have free from sharp edges & burrs. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All bearings and bushes shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with Vijayawada Municipal Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity. 1.00 Single Sit Up Board Dimensions:1800 mm (L) X 450 mm (W) X 900 mm (H)Supply, Delivery and Commissioning of SIT UP BOARD SINGLE with footrest support & sit up board pipe shall be of 50 mm NB dia of thickness not less than 4.1mm. Handle frame & seat frame support shall be minimum of 32mm NB dia of thickness not less than 3.6mm are of C class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. Sit Up Board frame is made with high quality FRP / SS 304 perforated material. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with Kakinada Smart City Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity. 1.00 Thaichi Spinner 4 Wheel *Dimensions: 1230 mm (L) X 520 mm (W) X 1500 mm (H)Supply, Delivery and Commissioning of THAI CHI SPINNER 4 WHEEL with center pipe shall be of minimum 100mm NB dia of thickness not less than 5.00 mm, support frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & THAI CHI SPINNER rings shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of C class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded with Handle knobs are made from high quality nylon material. The rings are hinged over 32NB support frame with the help of specially heavy-duty bearings should be reputed SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8 mm. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with Kakinada Smart City Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity. 30.56 Disposal of excavated earth and C&D waste with a lead of 5 km using tippers/tractors including labouor charges for loading unloading etc as directed by the officer incharge.
