| 1 | 1 | PART A - Civil Work | | | |
|---|
| 2 | 2 | Earth work in exvavation by mechanical means (Hydraulic Excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sum on plan) incuding dressing of sides and ramming of bottoms, lift upto 1.5m, including taking out the exvavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus exvavated soil as directed with in a lead of 50 meter. All kinds of soil. | | 56 | Cum. |
|---|
| 3 | 3 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth level 1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size | | 25 | Cum. |
|---|
| 4 | 4 | Brick work with common burnt clay F.P.S. (Non Modular) bricks of class designation 7.5 in Foundation and plinth with Cement mortar (1:6). | | 70 | Cum. |
|---|
| 5 | 5 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1cement: 3 coarse sand) and making good the joints and cost of plastizers (if required) excluding the cost of centering, shuttering and reinforcement.M20 grade Nominal mix/Design mix. | | 15 | Cum. |
|---|
| 6 | 6 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundation, footings, strap beam, raft, bases of columns etc. | | 30 | Sqm. |
|---|
| 7 | 7 | Brick work with common burnt clay F.P.S. (Non Modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in Cement mortar 1:6 (1cement : 6 coarse sand). | | 50 | Cum. |
|---|
| 8 | 8 | Providing and laying in postion specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1cement: 3 coarse sand) and making good the joints and cost of plastizers (if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floor, roofs, griders having slopes up to 150, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircasesd and spiral staircasesd etc. M20 grade Nominal Mix/ Design Mix. | | 33 | Cum. |
|---|
| 9 | 9 | Centering & Shuttering with plywood steel sheet including strting propping bracing both ways with steel props & removal of forms. Suspended floors, roofs, landings, staircases, Sqm balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beams, plinth beam etc. | | 193.98 | Sqm. |
|---|
| 10 | 10 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level.Hot rolled deformed bars(IS:1139) | | 5760 | Kg. |
|---|
| 11 | 11 | Providing and laying Common burnt clay brick tiles of class designation 100 over roofs grouted with cement morter 1:3 (1 cement :3 fine sand ) mixed with 2% o integral water proofing compound by weight of cement over a 12 m layerof ceent morter 1:3 ( 1 cement :3 fine sand ) and finishred neat . | | 141 | Sqm. |
|---|
| 12 | 12 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred welded and grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm. long embedded in C.C. block 15x10x10 Cm. of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 55x20mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10mm x 10mm square bars welded to frame for paitam fixing float glass 4 mm thick panes with glazing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel power coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer-in-charge.Window openable | | 20 | Sqm. |
|---|
| 13 | 13 | Providing & fixing fly proof wire qauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised MS wire gauge with 0.63mm dia wire and 1.4 mm. | | 20 | Sqm. |
|---|
| 14 | 14 | Providing and fixing Square bars or other flat welded to window, ventilators etc. | | 116 | Kg. |
|---|
| 15 | 15 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20 mm thick. | | 425 | Sqm. |
|---|
| 16 | 16 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished:12 mm thick | | 280 | Sqm. |
|---|
| 17 | 17 | Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jamb, lock jamb, bead and if reuqired angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with morta guards, lock strike-plate and shock absorbers as specified and applying a coat of approved stgeel primer after pre-treatment of the surface including filling with CC 1:2:4 (M15 grade) complete as directed by Engineer-in-charge: profile C&D. | | 71 | Mtr. |
|---|
| 18 | 18 | Providing and fixing Ist quality MAT finished ceremic tile size 300x300mm confirming to IS: 13755 and IS: 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4.).ick. | | 7 | Sqm. |
|---|
| 19 | 19 | Providing and fixing Ist quality standard White , grey . Ivory, fume red brown , light green , light blue and other light shades glaed tiles cinfirming to IS : 13753 & IS :15622 of sizze 200mmx300 mm in walls ,steps pillers etc .laid on a bed of neat cement slurry finished with flus pointing to match the shade of the tilee complete ( excuding tht cost of cemrnt plaster on wallsand piller) | | 40 | Sqm. |
|---|
| 20 | 20 | Providing and fixing Granite stone slab mirror polished and machine edge cut in Walls, Pillars, Steps, Shelves, Sills, Counters. Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with pigment to match the shade of the marble slab complete including grinding, rubbing and polishing completeblack /south above 3601 cm2 slabs | | 7 | Sqm. |
|---|
| 21 | 21 | Kota stone slab flooring 25mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the lab including rubbing and polishing complete with base of cement mortar 1:4 ( 1 cement: 4 coase sand) for area of slab from 2001 to 5000 Sqcm. | | 75 | Sqm. |
|---|
| 22 | 22 | Chequerred precast cement concrete tiles 22 mm thick in footpath &coutyard jointed with neat cement slurry mixes with incuding rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1: 4 Coarse sand ) Dark shed using ordinry cement | | 20 | Sqm. |
|---|
| 23 | 23 | Providing and fixing external grade board solid core single/ Double leaf flush door shutters IS: 2202 (Part-II) 1996 marked using Phenol formal dehyderesin in glue both sides with approved stainless steel fittings complete as per annexure 'A\" Commercial Veneer both side.35 mm thick shutter | | 22 | Sqm. |
|---|
| 24 | 24 | Finishing walls with acrylic smooth exterior paint of required shade including all scaffolding . New work ( Two or more coat of water proofing cement paint applied @ 2.20 kg /10 sqm ) | | 280 | Sqm. |
|---|
| 25 | 25 | Providing and applying plaster of paris putty of 2 mm thickness over plasted surface to prepare the surface evevn and smooth complete | | 1662.06 | Sqm. |
|---|
| 26 | 26 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on New work. | | 128 | Sqm. |
|---|
| 27 | 27 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: including all scaffolding : New work ( Two or more coats )including prepartion of base with primer ,putty ,lippy etc complete in all respect | | 435 | Sqm. |
|---|
| 28 | 28 | Providing and fixing glazing in aluminium door, window, vintilator shutters and partitions etc. with PVS/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost. of aluminium snap beading shall be paid in basic item.)with glass panes of 5.0mm thickness (weight not less than 13.75 Kg/Sqm) as per IS : 2835 | | 10 | Sqm. |
|---|
| 29 | 29 | Filling with available fly ash and earth (( eccluding rock ) in trenchs or emankment in layers (( ach layer should not exceedd 15 cm ), with intermedeate layer of completed earth ( soil density of 98 % ) after every four layer of compacted depth of fly ash , sides & top layer of filling shall be done with earth having total mimimum compacted thickness 30 cm or as decided by Engineer - in charge , including compcting each layer by rolling / ramming and watering ,all complete as per drawing and direction of Engineer -in- charge . | | 167 | Cum. |
|---|
| 30 | 30 | Providing and laying factory made chamfered edge cement concrte paver blocks of required strength , thickness & size / shapes , made by hudralic pressed , laid in required gray / yellow / red or ay other colour & pattern over 50 mm thick compected bed of coarse sand , compactig and proper embedding / laying off inter locking paver blocks into the sand bedding layer throgh vibratory compaction by using plate vibrator , filling the joints with fine sand and cutting of paver blocks as per required size and pattern , finishing and swweeping extra sand in footpath , arks lawns drive ways or light traffic parking etc. all complete as per manufacutres's specifications & direction of Engineer -un -charge 80 mm thick c.c. paver block of M-30 grade with approved colour design and pattern .( Category 'B' Denated only two side like I,Z,T shape etc. ) | | 80 | Sqm. |
|---|
| 31 | 31 | Suppling and fixing of rolling shutters of approved make, made of 80x1.25mm ms laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangments for in side and out side locking with push and pull operation complete including cost of spring hooks, providing and fixing necessary 25.3 cm long wire spring grade No 2 and ms top cover 1.25 mm thick for rolling shutters as per design (Clear openable area to be measured for pay | | 8 | Sqm. |
|---|
| 32 | 32 | Providing and fixing boll bearing for rolling shutters | | 2 | Nos. |
|---|
| 33 | 33 | PART B - SANITARY WORK | | | |
|---|
| 34 | 34 | P & F Indian type white glazed vitreous china Ist quality W.C. orissa pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor :size 580x440 mm | | 1 | Nos. |
|---|
| 35 | 35 | P & F Ist quality WVC Urinal (IS:2556 mark) with 25 mm dia G.I. waste pipe, dome couplings, concealed iron brackets or screws etc. complete. WVC Flat half stall Urinal sie 580x380x350 mm /Angle back 450x375 x350 type liped front | | 2 | Nos. |
|---|
| 36 | 36 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall :Size 650 mm x 500 mm dia for counter top. | | 2 | Nos. |
|---|
| 37 | 37 | Providing and fixing white vitreous china pedestal for wash basin completely recesses at the back for the reception of pipe and fitting | | 2 | Nos. |
|---|
| 38 | 38 | P&F towel rail or ring of approved quality /make:C.P. brass towel rail with brackets 600x20 mm | | 2 | Nos. |
|---|
| 39 | 39 | P & F kitchen & Lab Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up to floor level complete including cutting and making good the wall & floor white vitreous china laboratry sink 600x450x200 mm | | 1 | Nos. |
|---|
| 40 | 40 | P&F Beveled edge mirror of special glass of appd make (Atul/equivalent) complet with 6mm thick asbestos cemetn sheet ground fixed to wooden scrwes & washers.Size 600 x 450mm x 4mm thick | | 2 | Nos. |
|---|
| 41 | 41 | P&F Grating of approved quality/ makeSynthetic material (PTMT) of approved quality/ make size 125mm dia | | 5 | Nos. |
|---|
| 42 | 42 | P&F Soap dish or tray of approved quality/ make.C.P. brass heavy and superior quality | | 5 | Nos. |
|---|
| 43 | 43 | Providing and fixing polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite pPressure Pipes conforming to IS- 15450 U.V. stabilised with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 800 C including all special fittings of composite material (Engineering Plastic blend and brass inserts wherever reuqired) e.g. elbows, tees, reducers, couplers & connectors etc. with clamps at 1.00 metre spacing. This includes testing of joints completre as per directdion of the Engineer in charge. Internal work- Exposed on Walls. | | | |
|---|
| 44 | 44 | 1216 (16 mm OD) pipe | | 60 | Mtr. |
|---|
| 45 | 45 | 2025 (25 mm OD) pipe | | 12 | Mtr. |
|---|
| 46 | 46 | P & F Bib Cock (IS:8931 Mark) Superior quality of approved make :Brass 400 gm. 15 mm nominal bore. | | 10 | Nos. |
|---|
| 47 | 47 | P & F Stop cock (IS:8931 Mark) superior quality & of approved make.Brass 400 gm. 15 mm nominal bore. | | 2 | Nos. |
|---|
| 48 | 48 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15 mm Brass (IS:8931 marked).with 37 Cm. long pipe and nut. | | 5 | Nos. |
|---|
| 49 | 49 | P & F Ball Cock (IS:1703 Mark) with Rod & P.V.C. Ball complete.Brass wt. 400 gm, 15 mm. | | 1 | Nos. |
|---|
| 50 | 50 | P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design.1000 litres capacity. | | 1 | Nos. |
|---|
| 51 | 51 | Construction of septic tank in all type sof soil with 40cm thick masonry in CM 1:6 15cm thick CC bed of 1:5:10 M-15 grade CC flooring & over stone slab covering, 80mm thick slab jointing of slab in CM 1:3, Ralthal, Kharanja, 50mm thick stone partiton walls, 20mm thick plaster in CM 1:6 finished with neat floating cement, 4Nos C.I. foot rests of approved design, two No. 450mm dia 25Kg each C.I. cover with frame, earth work etc. complete as per approed drawing incl. disposal of surplus earth wtihin a lead of 50mtr.Size 200x100x130cm (for 10users) | | 1 | Nos. |
|---|
| 52 | 52 | P & F Sink Cocks of superior quality & approved made:C.P. Sink cock swinging spout 15 mm. | | 1 | Nos. |
|---|
| 53 | 53 | Construction of soakage well in all types of soil of approved drawing, top 90cm portion in 450mm thick masonry with CM 1:6, 80mm thick stone slab covering, jointing of slab in CM 1:3, Ralthal, Kharanja 40mm thick M-15 grade C.C. flooring, earth work etc. complete incl. disposal of surplus earth within alead of 50mtr.Inner dia 90cm &10 to 12 mtr.deep. | | 1 | Nos. |
|---|
| 54 | 54 | P & F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm.Makrana 'Adanga' or Raj Nagar ISt Quality White or Andhi Indi-Italian marble. | | 2 | Nos. |
|---|
| 55 | 55 | P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110 mm dia | | | |
|---|
| 56 | 56 | 110mm dia | | 44 | Mtr. |
|---|
| 57 | 57 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: | | | |
|---|
| 58 | 58 | ( A )Plain Tee 110 mm dia | | 5 | Nos. |
|---|
| 59 | 59 | ( B) Bend 87.50 110 mmm dia | | 20 | Nos. |
|---|
| 60 | 60 | PART 'C' ELECTRIC WORK | | | |
|---|
| 61 | 61 | Wiring of light point / fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper counductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked Midium duty PVC conduit & it's accessories, round tiles, hot dipped Galvanized Modular Box with earth terminal, 6A modular switch, Modular plate with grid plate, screws, making connections, testing etc. as requaired. | | | |
|---|
| 62 | 62 | (a) Short point (up to 3 mtr.) Group-I | | 20 | Nos. |
|---|
| 63 | 63 | (b) Medium Point (up to 6 mtr.) Group-I | | 16 | Nos. |
|---|
| 64 | 64 | (c) Long Point (up to 10 mtr.) Group-I | | 12 | Nos. |
|---|
| 65 | 65 | Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper counductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked Midium duty PVC conduit & it's accessories, round tiles, hot dipped Galvanized Modular Box of 20 SWG with earth terminal, 6A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as requaired. | | | |
|---|
| 66 | 66 | (a) On Board Group-I | | 20 | Nos. |
|---|
| 67 | 67 | (b) Medium point (upto 6 mtr.) Group-I | | 4 | Nos. |
|---|
| 68 | 68 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. | | | |
|---|
| 69 | 69 | (a) 2 x 2.5 sqmm + 1 x 1.5 Sqmm Group-I | | 220 | Mtr. |
|---|
| 70 | 70 | (b) 2 x 4 sqmm + 1 x 2.5 Sqmm Group-I | | 150 | Mtr. |
|---|
| 71 | 71 | (c) 2 x 6 sqmm + 1 x 2.5 sqmm Group-I | | 90 | Mtr. |
|---|
| 72 | 72 | (d) 1 x 1.5 sqmm Group-I | | 120 | Mtr. |
|---|
| 73 | 73 | P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required. Group-I | | 18 | Nos. |
|---|
| 74 | 74 | P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required. Group-I | | 18 | Nos. |
|---|
| 75 | 75 | P & F 240-415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/C/D tripping characterstic) ISI marked IS 8828 (1996)]/ conforming to IEC 60898 in existing board/ sheets including making connections, testing etc, as required. | | | |
|---|
| 76 | 76 | (a) Single pole MCB 6 A to 32 A rating Group-I | | 24 | Nos. |
|---|
| 77 | 77 | P & F 240/415 V isolator conforming to IS: 13947-III/ IEC 60947-3 on existing board/ sheet including making connections, testing etc. as required. | | | |
|---|
| 78 | 78 | Double pole isolator\na) 30A / 40 A rating Group-I | | 3 | Nos. |
|---|
| 79 | 79 | P & F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link, neutral link, earth link and din bar, conforming to IS 13032 & IS 8623 including making internal DB terminations with copper lugs, testing etc. as required. | | | |
|---|
| 80 | 80 | Double door (Three phase ) \n(a) 6 Way Group-I | | 2 | Nos. |
|---|
| 81 | 81 | S & F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface/ recessed using saddles, clamps , fastener as required including cutting the wall covering conduit and making good the same as required. | | | |
|---|
| 82 | 82 | a) 25 mm Group-I | | 180 | Mtr. |
|---|
| 83 | 83 | P/Laying P.V.C. / XLPE insulated & PVC sheathed cable of 1.1 KV grade with aluminium conductor of IS: 1554 P-1 of Group-1 of approved make in ground as per IS:1225 including excavation of 30 cm x 75cm size trench, 25 cm thick under layer of sand, IInd class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. | | | |
|---|
| 84 | 84 | a) 25 sqmm 4 core (armourned) | | 60 | Mtr. |
|---|
| 85 | 85 | P&F 9/11/13Watt CFL mirror light with CRCA powder coated housing, diffuser end covers, copper ballast, holder prewired upto terminal block including making connection testing etc. as required (without tube) Group-I | | 2 | Nos. |
|---|
| 86 | 86 | Maintenance free Gel Earthing with pipe in pipe / Pipe in strip technoloty filled with anti corrosive conductive compound (CPRI Tested) below the ground in 150-200 mm dia. earth pit & surrounding filled with required mineral filling compound (MFC should fave hygroscopic property to ratain the moisture for long time to create low resistance zone) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300 mm complete testing of earth resistance as required. of following sizes. | | | |
|---|
| 87 | 87 | With pipe in pipe Technology (Inner pipe dia. / Outer pipe dia) 80-100 micron GI coating\ni) GI pipe 2000mm long, 50/25mm Terminal 12 mm GI strip | | 2 | Nos. |
|---|
| 88 | 88 | S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/ recess including riveting, soldering, saddles, making connection etc. as required. | | | |
|---|
| 89 | 89 | (a) 8 SWG Copper Wire | | 20 | Mtr. |
|---|
| 90 | 90 | P&F double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod upto 30 cm with 3x1.5 sq.mm PVC nsulated flexible copper conductor making connection testing etc. as required. | | | |
|---|
| 91 | 91 | a) 1200mm sweep Group-I | | 12 | Nos. |
|---|
| 92 | 92 | P&F 18 swg M.S. Recesed fan box, hexagonal/round of size 130mm dia, depth 75mm, 12mm dia rod fan hook with 100 mm length extended on each side. | | 14 | Nos. |
|---|
| 93 | 93 | P&F of Double ball bearing, capacitor start single phase metallic blade fresh air fan, in exising opening including cost of hardware, flexible copper conductor making connections, testing etc. as required. | | | |
|---|
| 94 | 94 | a) 225 mm sweep Group-I | | 3 | Nos. |
|---|
| 95 | 95 | P&F box type fluorescent tube fitting fabricated from CRCA sheet and finished with powder coating / stove enamelled paint complete with accessories (Low Loss Copper Choke, starter, starter seat) / Electronic Choke with terminal block duly prewired with copper conductor including making connection, testing etc. as required. (without tube). | | | |
|---|
| 96 | 96 | a) 1 x 36 watt with EB Group-I | | 16 | Nos. |
|---|
| 97 | 97 | P&F Fluorscent tube rod in existing fixtures as required, fluorscent powder coated (minimum 3 STAR rating). | | | |
|---|
| 98 | 98 | a) 36/40 watts Group-I | | 16 | Nos. |
|---|
| 99 | 99 | Supplying and fixing of power plug point modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet, making connection testing, etc. as required. Group-I | | 14 | Nos. |
|---|
| 100 | 100 | SITC of ISI mark (IS : 8472) self proming monoblock pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 1440/1500 RPM, single phase (180 to 240 V) Including cost of hardware etc on existing platform complete, Pump shall have following HP Rating, phase, Head, minimum Discharge respectively. | | | |
|---|
| 101 | 101 | Self priming pumps \na) 0.5 HP, 1-Q, (6-28) Mtr., (52-12.0) LPM Group-I | | 1 | Nos. |
|---|
| 102 | 102 | Wiring for sub mains ISI marked (IS : 694) 1100 Volts grade PVC insulated flat twin core sheathed solid aluminium conductor with 10 SWG G.I. support wire duly clipped etc. as required. | | | |
|---|
| 103 | 103 | a) 10.0 sq.mm. Group-I | | 60 | Mtr. |
|---|
| 104 | 104 | P&F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required : | | | |
|---|
| 105 | 105 | a) 5 step fan regulator 2 module Group-I | | 16 | Nos. |
|---|
| 106 | 106 | b) Blanking plate Group-I | | 20 | Nos. |
|---|
| 107 | 107 | P&F ISI marked ding dong/musical chime bell including making connection testing etc. as required Group-I | | 2 | Nos. |
|---|
| 108 | 108 | P&F of IP-65 protected LED street light luminaries on existing bracket. Fixture made of powder coated single piece pressure die cast aluminum with heat dissipation fins on housing with UV stabilized PC/ Toughened glass cover (from 45W onwards) and should be secondary lens on each LED. The system level luminaries efficacy >=100 with high power LEDs of CREE/ NICHIA/ OSRAM/ PHILIPS/ SEOUL make is to be used. LED driver shall be BIS certified and input voltage AC 110 to 270 V AC with input frequency 50Hz ±3% power factor >0.95 driver efficiency >85%, THD (I) <10% humidity 10% to 90% RH working temp -20C to 50C. Life expectancy equal or more than 50000 burning hrs with minimum 70% initial lumens maintained, rendering index >75%. Surge protection shall be min = 5 KV internal and min 10 KV external. Manufactures word mark/Name engraved / embossed on die cast housing to allow traceability / authenticity till life of fixture. Fixtures shall be CE complained. | | | |
|---|
| 109 | 109 | a) LED Street light fixture 60 Watt Group-A1 | | 2 | Nos. |
|---|
| 110 | 110 | Supply & fixing of G.I. pipes with flanges duly screwed & welded including rubber washer, nuts & bolts of 8 mm dia complete in all respect ISI make.\na) B Class 40 mm dia | | 3 | Mtr. |
|---|
| 111 | 111 | P&F of RCBO with overload, short-circuit and earth leakage protuction ISI markrd (IS12640) / conforming to IEC 61009/1 complete in all respect including making connections, testing etc. as required : \nFour pole 30 mA sensitivity\n25 A rating Group-1 | | 1 | Nos. |
|---|
| 112 | 112 | Supply and fixing ISI marked (IS : 15683) Portable Fire Exitnguisher, ABC type, finished externally with red enamel paint, complete in all respects including initial fill and wall suspension of following capacity : 4 Kg. | | 2 | Nos. |
|---|
| 113 | 113 | P&F of IP20 LED Recessed / Surface Mounted, Round / Square Non-Dimmable Down light with die-cast aluminum housing & Heat Sink for heat dissipation, high purity reflector with external BIS certified 2.5 KV surge protected driver having efficiency > 85% and in compliance to IEC standards. System Lumen efficacy of = 100 lm/ watt and life time of minimum 35000 Burning hours with 70% of initial lumen maintained, CCT 3000 Deg. K / 4000 Deg. K / 6000 Deg. K, maximum power consumption should not more than the specified rating and fixture shall be of CE complained : Recessed Mounting : | | | |
|---|
| 114 | 114 | i) LED Downlight 18/20W Group-I | | 12 | Nos. |
|---|