Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-01-2021 | Corrigendum | Date | 04-02-2021 |
| 2 | 14-01-2021 | Corrigendum-II | Other | 29-01-2021 |
| 3 | 13-01-2021 | Corrigendum | Other | 29-01-2021 |
| Name of Work: RENOVATION & UPGRADATION OF GOVT. I.T.I. PIRAN KALIYAR, BLOCK - ROORKEE, DISTRICT - HARIDWAR. ( UNDER WORLD BANK ASSISTANCE) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-charge | Itemcode1 | 111 | cum |
| 2 | 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Itemcode2 | 2759 | sqm |
| 3 | 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar | Itemcode3 | 41 | cum |
| 4 | 4 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | Itemcode4 | 7 | Cum |
| 5 | 5 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead | Itemcode5 | 101 | Nos |
| 6 | 6 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. | Itemcode6 | 877 | Cum |
| 7 | 7 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Itemcode7 | 836 | Sqm |
| 8 | 8 | Diluting and injecting chemical emulsion (Chlorpyriphos/Lindane E.C. 20% with 1% concentration), at the rate of one litre per hole at 300 mm c/c to all the horizontal and vertical surfaces of the excavations made for the foundation of the building, soil under floors, apron, back fill material and along all the faces of the walls for PRE-CONSTRUCTIONAL anti-termite treatment (including the cost of chemical emulsion) as per IS:6313 Part-II. (Plinth area of Building shall be measured for Payment). | Itemcode8 | 287 | Sqm |
| 9 | 9 | Supplying and filling in plinth with Jamuna sand under floors including, watering, ramming consolidating and dressing complete. | Itemcode9 | 28 | Cum |
| 10 | 10 | Construction of Embankment with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting tomeet requirement of Tables 300.1 and300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 | Itemcode10 | 515 | Cum |
| 11 | 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) | Itemcode11 | 112 | Sqm |
| 12 | 12 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). | Itemcode12 | 52 | Sqm |
| 13 | 13 | Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. | Itemcode13 | 52 | Sqm |
| 14 | 14 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed by dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth | Itemcode14 | 88 | Sqm |
| 15 | 15 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | Itemcode15 | 246 | cum |
| 16 | 16 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) | Itemcode16 | 233 | cum |
| 17 | 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars | Itemcode17 | 45060 | Kg |
| 18 | 18 | Centring and shuttering including strutting,ropping etc. and removal of form for | Itemcode18 | ||
| 19 | 18.1 | Foundations, footings, bases of columns, etc. for mass concrete. | Itemcode19 | 363 | Sqm |
| 20 | 18.2 | Centring and shuttering for Walls (any thickness) including attached pilasters,butteresses, plinth and string courses etc. | Itemcode20 | 239 | Sqm |
| 21 | 18.3 | Columns, Pillars, Piers, Abutments, Posts and Struts. | Itemcode21 | 995 | Sqm |
| 22 | 18.4 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. | Itemcode22 | 782 | sqm |
| 23 | 18.5 | Suspended floors, roofs, landings, balconies and access platform. | Itemcode23 | 642 | sqm |
| 24 | 19 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) | Itemcode24 | 46 | Cum |
| 25 | 20 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) | Itemcode25 | 369 | cum |
| 26 | 21 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) | Itemcode26 | 86 | sqm |
| 27 | 22 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry | Itemcode27 | 86 | sqm |
| 28 | 23 | Providing and fixing Tata Steel Pravesh Door, 200 MM X 300 MM Vision Panel Glass (Sheet Thickness 0.8 ,1.2 with Honeycomb infill) | Itemcode28 | ||
| 29 | 23.1 | D1 (Tata Steel Door swings type size 1524x2134) (Double Shutter) | Itemcode29 | 4 | Nos |
| 30 | 23.2 | D2 (Tata Steel Door swings type size 1200x2134) (Single Shutter) | Itemcode30 | 9 | Nos |
| 31 | 23.3 | D3 (Tata Steel Door swings type size 1067x2134) (Single Shutter) | Itemcode31 | 11 | Nos |
| 32 | 23.4 | D4 (Tata Steel Door swings type size \n915x2134) (Single Shutter) | Itemcode32 | 24 | Nos |
| 33 | 24 | Providing & fixing Tata Steel window /sliding window, Oyster Window( Grill, Toughened Glass and Mesh), Middle 3ft Fix and Both Side Openable Shutter. | Itemcode33 | ||
| 34 | 24.1 | W1 (1828 x1219 ) | Itemcode34 | 75 | Nos |
| 35 | 24.2 | W2(900X1200) | Itemcode35 | 1 | Nos |
| 36 | 24.3 | V1 (750x600) | Itemcode36 | 3 | Nos |
| 37 | 24.4 | V2 (1200x600) | Itemcode37 | 14 | Nos |
| 38 | 25 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar work | Itemcode38 | 3345 | kg |
| 39 | 26 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Itemcode39 | 419 | kg |
| 40 | 27 | 12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) | Itemcode40 | 4622 | sqm |
| 41 | 28 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) | Itemcode41 | 2009 | sqm |
| 42 | 29 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.20 mm cement plaster | Itemcode42 | 91 | sqm |
| 43 | 30 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete | Itemcode43 | 3255 | sqm |
| 44 | 31 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water tinnable priming coat with cement prime | Itemcode44 | 3255 | sqm |
| 45 | 32 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) | Itemcode45 | 1415 | sqm |
| 46 | 33 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) | Itemcode46 | 1982 | sqm |
| 47 | 34 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | Itemcode47 | 1800 | Sqm |
| 48 | 35 | Galvanized Iron Security Barbed Wire Fencing | Itemcode48 | 3029 | Kgs |
| 49 | 36 | Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. | Itemcode49 | 1148 | Kgs |
| 50 | 37 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | Itemcode50 | 718 | sqm |
| 51 | 38 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm | Itemcode51 | 147 | Sqm |
| 52 | 39 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg /sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm | Itemcode52 | 271 | Sqm |
| 53 | 40 | 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1 mm to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume, including cement slurry etc. complete :Dark shade pigment with ordinary cement | Itemcode53 | 521 | Sqm |
| 54 | 41 | Marble chips skirting up to 30 cm height, rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume :18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse sand) :Dark shade pigment with ordinary cement | Itemcode54 | 47 | Sqm |
| 55 | 42 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick | Itemcode55 | 1900 | RM |
| 56 | 43 | 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. | Itemcode56 | 634 | sqm |
| 57 | 44 | 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.t | Itemcode57 | 30 | sqm |
| 58 | 45 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick | Itemcode58 | 47 | sqm |
| 59 | 46 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate 40 mm thick with 20 mm nominal size stone aggregate | Itemcode59 | 38 | sqm |
| 60 | 47 | Supplying, Drilling/Cleaning hole and injecting Hilti make ETA Approved RE500V3 chemical. Application to be designed separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR 023 or relevant tested and accepted rebar guidelines. The chemical should have ETA approval for seismic rebar as a minimum qualifying criteria. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDE A22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer’s recommendations. The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/ design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars.16mm dia rebar at 600 mm depth | Itemcode60 | 408 | Nos |
| 61 | 48 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) | Itemcode61 | 22 | Cum |
| 62 | 49 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : | Itemcode62 | 298 | sqm |
| 63 | 50 | Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat: With common burnt clay F.P.S. (non modular) brick tiles of class designation 10 | Itemcode63 | 19 | sqm |
| 64 | 51 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete | Itemcode64 | 6685 | Kg |
| 65 | 52 | Supply & installation of precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT) thick Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Itemcode65 | 777 | sqm. |
| 66 | 53 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution | Itemcode66 | 212 | sqm. |
| 67 | 54 | INVOTECH CORK SHEET NOTICE DISPLAY PIN UP SOFT BOARD 1200 X 2400 (INVOSUPER) (INVO CORKBOARD 120240) Soft Display Boards as required. | Itemcode67 | 50 | Each |
| 68 | 55 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall | Itemcode68 | ||
| 69 | 55.1 | 15 mm dia nominal bore | Itemcode69 | 35 | RM |
| 70 | 55.2 | 20 mm dia nominal bore | Itemcode70 | 20 | RM |
| 71 | 55.3 | 25 mm dia nominal bore | Itemcode71 | 30 | RM |
| 72 | 56 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge | Itemcode72 | ||
| 73 | 56.1 | 50 mm dia nominal bore | Itemcode73 | 75 | RM |
| 74 | 56.2 | 40 mm dia nominal bore | Itemcode74 | 50 | RM |
| 75 | 56.3 | 32 mm dia nominal bore | Itemcode75 | 70 | RM |
| 76 | 56.4 | 25 mm dia nominal bore | Itemcode76 | 130 | RM |
| 77 | 57 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc, not exceeding 80 mm dia. | Itemcode77 | 325 | RM |
| 78 | 58 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall 15 mm dia Nominal Bore. | Itemcode78 | 10 | RM |
| 79 | 59 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 50 mm dia nominal bore (For External Work) | Itemcode79 | 10 | RM |
| 80 | 60 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore. | Itemcode80 | 19 | Nos |
| 81 | 61 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approvedquality . | Itemcode81 | 17 | Nos |
| 82 | 62 | Providing and fixing brass stop cock of approved quality : 15 mm dia nominal bore | Itemcode82 | 2 | Nos |
| 83 | 63 | Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore | Itemcode83 | 2 | Nos |
| 84 | 64 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm dia nominal bore. | Itemcode84 | 1 | Nos |
| 85 | 65 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm dia nominal Bore. | Itemcode85 | 8 | Nos |
| 86 | 66 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal dia Horrizontal. | Itemcode86 | 1 | Nos |
| 87 | 67 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank | Itemcode87 | 20500 | Lt. |
| 88 | 68 | Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs of M.S. flat 10x5 mm, 10 cm long, forked at end 60cm apart (minimum three lugs to be provided), including necessary welding and applying a priming coat of approved primer on exposed surface etc. complete. | Itemcode88 | 236 | Kg |
| 89 | 69 | Supply and installation of Kirloskar make (1HP) Single phase | Itemcode89 | 1 | Nos |
| 90 | 70 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Itemcode90 | 6 | Nos |
| 91 | 71 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | Itemcode91 | 1 | Nos |
| 92 | 72 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | Itemcode92 | 2 | Nos |
| 93 | 73 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar tap | Itemcode93 | 1 | Nos |
| 94 | 74 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 450 x 300 mm with single 15mm C.P. brass pillar tap | Itemcode94 | 4 | Nos |
| 95 | 75 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Itemcode95 | 3 | Nos |
| 96 | 76 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm | Itemcode96 | 4 | Nos |
| 97 | 77 | Providing and fixing soil , waste and vent pipes: S.C.I S&S pipe as per IS:1729 | Itemcode97 | ||
| 98 | 77.1 | 100 mm dia | Itemcode98 | 50 | RM |
| 99 | 77.2 | 75 mm dia | Itemcode99 | 35 | RM |
| 100 | 78 | Providind and fixing M.S.holder bat clamps of approved design to sand cast iron/cast iron (squn) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1cement :2coarse sand :4graded stone aggregate 20mm nominal size ) including cost of cutting holes and making good the walls etc: | Itemcode100 | ||
| 101 | 78.1 | for 100 mm dia pipe | Itemcode101 | 14 | Nos |
| 102 | 78.2 | for 75 mm dia pipe | Itemcode102 | 8 | Nos |
| 103 | 79 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Sand cast iron S&S as per IS - 1729 | Itemcode103 | ||
| 104 | 79.1 | 100 mm dia | Itemcode104 | 11 | Nos |
| 105 | 79.2 | 75 mm dia | Itemcode105 | 9 | Nos |
| 106 | 80 | Providing and fixing plain bend of required degree. Sand cast iron S&S as per IS - 1729 | Itemcode106 | ||
| 107 | 80.1 | 100 mm dia | Itemcode107 | 13 | Nos |
| 108 | 80.2 | 75 mm dia | Itemcode108 | 9 | Nos |
| 109 | 81 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : | Itemcode109 | 6 | Nos |
| 110 | 82 | Providing and fixing terminal guard 100 mm Sand cast iron S&S as per IS - 1729 | Itemcode110 | 9 | Nos. |
| 111 | 83 | Providing and fixing collar : Sand cast iron S&S as per IS - 1729 | Itemcode111 | ||
| 112 | 83.1 | 100mm | Itemcode112 | 9 | Nos |
| 113 | 83.2 | 75 mm | Itemcode113 | 7 | Nos |
| 114 | 84 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth Nos. 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. | Itemcode114 | 1 | Nos |
| 115 | 85 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm | Itemcode115 | 1 | Nos |
| 116 | 86 | Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm Nos. wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colours weighing not less than 80 gms | Itemcode116 | 1 | Nos |
| 117 | 87 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | Itemcode117 | 50 | RM |
| 118 | 88 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm diameter S.W. pipe | Itemcode118 | 50 | RM |
| 119 | 89 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 250 mm diameter S.W. pipe 150 mm diameter S.W. pipe | Itemcode119 | 50 | RM |
| 120 | 90 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame o f 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Itemcode120 | 5 | Nos |
| 121 | 91 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, totalweight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Itemcode121 | 6 | Nos |
| 122 | 92 | Extra depth for manholes Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Itemcode122 | 3 | RM |
| 123 | 93 | Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer | Itemcode123 | 51 | Sqm |
| 124 | 94 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | Itemcode124 | 7755 | kg |
| 125 | 95 | Providing fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building. | Itemcode125 | 602 | Sqm |
| 126 | 96 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick corrugated (2.5\" or 4.2\" or 6\") or step-down (2\" or 3\" or 6\" ) as specified | Itemcode126 | 60 | Sqm |
| 127 | 97 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : | Itemcode127 | ||
| 128 | 97.1 | Ridges plain (500- 600 mm) | Itemcode128 | 52 | RM |
| 129 | 97.2 | Gutter ( 600 mm over all girth). | Itemcode129 | 135 | RM |
| 130 | 98 | SUPPLY OF 600MM DIA TURBOVENT, TOP - SS MATERIAL, BASE - POLYCARBONATE SHEET EMBOSSED 2MM THICK | Itemcode130 | 36 | Set |
| 131 | 99 | 12 mm thick cement plaster in 1:4 ( 1 cement and 4 fine sand) mortar including supply of all material , labour and T&P etc. required for proper completion of the work. | Itemcode131 | 119 | Sqm |
| 132 | 100 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : | Itemcode132 | 10 | RM |
| 133 | 101 | Supplying and stacking at site. Over burnt (Jhama) brick aggregate 90 mm to 45 mm | Itemcode133 | 16 | Cum |
| 134 | 102 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. | Itemcode134 | ||
| 135 | 102.1 | All types of soil : 350 mm dia | Itemcode135 | 24 | RM |
| 136 | 102.2 | Rocky strata including Boulders: 350 mm dia | Itemcode136 | 24 | RM |
| 137 | 103 | Supplying, filling, spreading & leveling stone boulders of size range ]5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. | Itemcode137 | 2 | Cum |
| 138 | 104 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia | Itemcode138 | 36 | RM |
| 139 | 105 | Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin- charge. | Itemcode139 | 7 | Cum |
| 140 | 106 | Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin- charge. | Itemcode140 | 2 | Nos |
| 141 | 107 | Mud Pump, Max Flow Rate: 5.1 LPS, Brand : Malhar, Head : 15mtr, Model : MP0 | Itemcode141 | 1 | Nos |
| 142 | 108 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand) | Itemcode142 | 116 | Sqm |
| 143 | 109 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality 19.19.1 L D- 2.5 Rectangular shape 600x450 mm internal dimensions | Itemcode143 | 2 | Nos |
| 144 | 110 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Itemcode144 | 1 | Nos |
| 145 | 111 | Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 lpm at 35 m Head | Itemcode145 | 1 | Each |
| 146 | 112 | Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts,gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 150 mm. Dia | Itemcode146 | 50 | RM |
| 147 | 113 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 150 mm dia | Itemcode147 | 6 | Nos. |
| 148 | 114 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 150mm dia | Itemcode148 | 6 | Set |
| 149 | 115 | Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. | Itemcode149 | 6 | PC |
| 150 | 116 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Stainless Steel (Grade 304) | Itemcode150 | 6 | PC |
| 151 | 117 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. | Itemcode151 | 12 | PC |
| 152 | 118 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. | Itemcode152 | 1 | Nos. |
| 153 | 119 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. | Itemcode153 | 6 | Nos. |
| 154 | 120 | Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required. 150mm dia | Itemcode154 | 6 | Nos. |
| 155 | 121 | \"Safex \" MS Hose Box double door (750 x 600 x 250) | Itemcode155 | 6 | Nos. |
| 156 | 122 | Fire buckets round bottom type enamel painted, white inside & Red out side and along with stand fabricated from MS angle to accommodate 4 buckets | Itemcode156 | 6 | Sets |
| 157 | 123 | ‘SAFEX’ ABC Stored Pressure Type Fire Extinguisher 4 Kgs. capacity bearing ISI Mark for Fighting ABC Class of Fire. The Extinguisher will be Manufactured Strictly as per BIS: 15683:2018 bearing ISI. mark.MAP 40% | Itemcode157 | 30 | PC |
| 158 | 124 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C | Itemcode158 | 303 | Point |
| 159 | 125 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. | Itemcode159 | 2 | Point |
| 160 | 126 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. | Itemcode160 | 708 | RM |
| 161 | 127 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. | Itemcode161 | ||
| 162 | 127.1 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire | Itemcode162 | 735 | RM |
| 163 | 127.2 | 4 X 4 sq. mm + 2 X 4 sq. mm earth wire | Itemcode163 | 850 | RM |
| 164 | 127.3 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire | Itemcode164 | 300 | RM |
| 165 | 127.4 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire | Itemcode165 | 100 | RM |
| 166 | 128 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit asrequired. 2 Pair | Itemcode166 | 90 | RM |
| 167 | 129 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm | Itemcode167 | 1030 | RM |
| 168 | 130 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 75 mm X 75 mm X 60 mm deep | Itemcode168 | 4 | Each |
| 169 | 131 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. | Itemcode169 | ||
| 170 | 131.1 | 5/6 amps switch | Itemcode170 | 63 | Each |
| 171 | 131.2 | 3 pin 5/6 amp socket outlet | Itemcode171 | 63 | Each |
| 172 | 131.3 | Telephone socket Outlet | Itemcode172 | 4 | Each |
| 173 | 132 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. | Itemcode173 | 96 | Each |
| 174 | 133 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. | Itemcode174 | 45 | Each |
| 175 | 134 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A\nmodular switch, connections etc. as required. | Itemcode175 | 117 | Each |
| 176 | 135 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. | Itemcode176 | 211 | Each |
| 177 | 136 | Installation, testing and commissioning of pre-wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling / wall, including connection with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required. | Itemcode177 | 1 | Each |
| 178 | 137 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. | Itemcode178 | 1 | Each |
| 179 | 138 | Supplying and fixing brass batten/ angle holder including connection etc. as required. | Itemcode179 | 51 | Each |
| 180 | 139 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. | Itemcode180 | 11 | Each |
| 181 | 140 | Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. | Itemcode181 | ||
| 182 | 140.1 | 100 mm width X 50 mm depth X 1.6 mm thickness | Itemcode182 | 100 | RM |
| 183 | 140.2 | 150 mm width X 50 mm depth X 1.6 mm thickness | Itemcode183 | 50 | RM |
| 184 | 140.3 | 225 mm width X 50 mm depth X 1.6 mm thickness | Itemcode184 | 50 | RM |
| 185 | 140.4 | 300 mm width X 50 mm depth X 1.6 mm thickness | Itemcode185 | 50 | RM |
| 186 | 140.5 | 375 mm width X 50 mm depth X 2.0 mm thickness | Itemcode186 | 30 | RM |
| 187 | 140.6 | 450 mm width X 50 mm depth X 2.0 mm thickness | Itemcode187 | 20 | RM |
| 188 | 140.7 | 600 mm width X 50 mm depth X 2.0 mm thickness | Itemcode188 | 10 | RM |
| 189 | 140.8 | 900 mm width X 75 mm depth X 2.0 mm thickness | Itemcode189 | 10 | RM |
| 190 | 141 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. | Itemcode190 | ||
| 191 | 141.1 | 100 mm width X 50 mm depth X 1.6 mm thickness | Itemcode191 | 5 | Each |
| 192 | 141.2 | 150 mm width X 50 mm depth X 1.6 mm thickness | Itemcode192 | 5 | Each |
| 193 | 141.3 | 225 mm width X 50 mm depth X 1.6 mm thickness | Itemcode193 | 3 | Each |
| 194 | 141.4 | 300 mm width X 50 mm depth X 1.6 mm thickness | Itemcode194 | 5 | Each |
| 195 | 141.5 | 375 mm width X 50 mm depth X 2.0 mm thickness | Itemcode195 | 2 | Each |
| 196 | 141.6 | 450 mm width X 50 mm depth X 2.0 mm thickness | Itemcode196 | 5 | Each |
| 197 | 141.7 | 600 mm width X 50 mm depth X 2.0 mm thickness | Itemcode197 | 3 | Each |
| 198 | 141.8 | 900 mm width X 75 mm depth X 2.0 mm thickness | Itemcode198 | 5 | Each |
| 199 | 142 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. | Itemcode199 | ||
| 200 | 142.1 | 100 mm width X 50 mm depth X 1.6 mm thickness | Itemcode200 | 5 | Each |
| 201 | 142.2 | 150 mm width X 50 mm depth X 1.6 mm thickness | Itemcode201 | 5 | Each |
| 202 | 142.3 | 225 mm width X 50 mm depth X 1.6 mm thickness | Itemcode202 | 3 | Each |
| 203 | 142.4 | 300 mm width X 50 mm depth X 1.6 mm thickness | Itemcode203 | 5 | Each |
| 204 | 142.5 | 375 mm width X 50 mm depth X 2.0 mm thickness | Itemcode204 | 2 | Each |
| 205 | 142.6 | 450 mm width X 50 mm depth X 2.0 mm thickness | Itemcode205 | 5 | Each |
| 206 | 142.7 | 600 mm width X 50 mm depth X 2.0 mm thickness | Itemcode206 | 3 | Each |
| 207 | 142.8 | 900 mm width X 75 mm depth X 2.0 mm thickness | Itemcode207 | 5 | Each |
| 208 | 143 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays Cross Member with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. | Itemcode208 | ||
| 209 | 143.1 | 100 mm width X 50 mm depth X 1.6 mm thickness | Itemcode209 | 5 | Each |
| 210 | 143.2 | 150 mm width X 50 mm depth X 1.6 mm thickness | Itemcode210 | 5 | Each |
| 211 | 143.3 | 225 mm width X 50 mm depth X 1.6 mm thickness | Itemcode211 | 3 | Each |
| 212 | 143.4 | 300 mm width X 50 mm depth X 1.6 mm thickness | Itemcode212 | 5 | Each |
| 213 | 143.5 | 375 mm width X 50 mm depth X 2.0 mm thickness | Itemcode213 | 2 | Each |
| 214 | 143.6 | 450 mm width X 50 mm depth X 2.0 mm thickness | Itemcode214 | 5 | Each |
| 215 | 143.7 | 600 mm width X 50 mm depth X 2.0 mm thickness | Itemcode215 | 3 | Each |
| 216 | 143.8 | 900 mm width X 75 mm depth X 2.0 mm thickness | Itemcode216 | 5 | Each |
| 217 | 144 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays Reducer with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. | Itemcode217 | ||
| 218 | 144.1 | 100 mm width X 50 mm depth X 1.6 mm thickness | Itemcode218 | 5 | Each |
| 219 | 144.2 | 150 mm width X 50 mm depth X 1.6 mm thickness | Itemcode219 | 5 | Each |
| 220 | 144.3 | 225 mm width X 50 mm depth X 1.6 mm thickness | Itemcode220 | 3 | Each |
| 221 | 144.4 | 300 mm width X 50 mm depth X 1.6 mm thickness | Itemcode221 | 5 | Each |
| 222 | 144.5 | 375 mm width X 50 mm depth X 2.0 mm thickness | Itemcode222 | 2 | Each |
| 223 | 144.6 | 450 mm width X 50 mm depth X 2.0 mm thickness | Itemcode223 | 5 | Each |
| 224 | 144.7 | 600 mm width X 50 mm depth X 2.0 mm thickness | Itemcode224 | 3 | Each |
| 225 | 144.8 | 900 mm width X 75 mm depth X 2.0 mm thickness | Itemcode225 | 5 | Each |
| 226 | 145 | Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required. | Itemcode226 | ||
| 227 | 145.1 | 16 A TPN | Itemcode227 | 10 | Each |
| 228 | 145.2 | 32 A TPN | Itemcode228 | 5 | Each |
| 229 | 145.3 | 63 A TPN | Itemcode229 | 5 | Each |
| 230 | 145.4 | 100 A TPN | Itemcode230 | 2 | Each |
| 231 | 146 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. | Itemcode231 | ||
| 232 | 146.1 | Upto 35 sq. mm | Itemcode232 | 500 | RM |
| 233 | 146.2 | Above 35 sq. mm and upto 95 sq. mm | Itemcode233 | 200 | RM |
| 234 | 146.3 | Above 95 sq. mm and upto 185 sq. mm | Itemcode234 | 100 | RM |
| 235 | 146.4 | Above 185 sq. mm and upto 400 sq. mm | Itemcode235 | 100 | RM |
| 236 | 147 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. | Itemcode236 | ||
| 237 | 147.1 | 3½ X 25 sq. mm (28mm) | Itemcode237 | 20 | Each |
| 238 | 147.2 | 3½ X 70 sq. mm (38mm) | Itemcode238 | 10 | Each |
| 239 | 147.3 | 3½ X 185 sq. mm (57mm) | Itemcode239 | 8 | Each |
| 240 | 147.4 | 3½ X 300 sq. mm (70mm) | Itemcode240 | 8 | Each |
| 241 | 147.5 | 4 X 10 sq. mm (25mm) | Itemcode241 | 20 | Each |
| 242 | 147.6 | 4 X 16 sq. mm (28mm) | Itemcode242 | 20 | Each |
| 243 | 148 | Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres. | Itemcode243 | 60 | Cum |
| 244 | 149 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required | Itemcode244 | ||
| 245 | 149.1 | 100 mm Dia | Itemcode245 | 50 | RM |
| 246 | 149.2 | 150 mm Dia | Itemcode246 | 50 | RM |
| 247 | 150 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) | Itemcode247 | ||
| 248 | 150.1 | 6 way (4 + 18), Double door | Itemcode248 | 5 | Each |
| 249 | 150.2 | 8 way (4 + 24), Double door | Itemcode249 | 7 | Each |
| 250 | 151 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole | Itemcode250 | 251 | Each |
| 251 | 152 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. | Itemcode251 | ||
| 252 | 152.1 | 40 amps | Itemcode252 | 10 | Each |
| 253 | 152.2 | 63 amps | Itemcode253 | 2 | Each |
| 254 | 153 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amp. | Itemcode254 | 16 | Each |
| 255 | 154 | Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. | Itemcode255 | 4 | Each |
| 256 | 155 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. | Itemcode256 | 4 | Each |
| 257 | 156 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. | Itemcode257 | 15 | Set |
| 258 | 157 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) | Itemcode258 | 300 | Mtr. |
| 259 | 158 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. | Itemcode259 | 2 | Each |
| 260 | 159 | Supply & fixing of AC 230/250 volts, 50 HZ energy efficient ceiling fan with standard down rod, blades, 3 nos. caps Model-ES 50 (1200 mm Sweep) etc. complete in all aspects as per direction of Engineer in Charge 1200 mm sweep. | Itemcode260 | 1 | Nos |
| 261 | 160 | Supply & fixing of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. complete . Model- Ventil Air - DS (Make : Havells) 300 mm sweep 900 rpm ,complete in all aspects as per direction of Engineer in Charge. | Itemcode261 | ||
| 262 | 160.1 | 300 mm sweep 900 rpm | Itemcode262 | 11 | Nos |
| 263 | 160.2 | 450 mm sweep 900 rpm | Itemcode263 | 57 | Nos |
| 264 | 161 | Supply and fixing of LED Tube light 20W (Code- LHEXBYPNIN1W020) ,Lumen Output- 3000, 4000, 6500K, Wall mounted LED batten (E-LITE LED TRIYCA) all in one fixture. complet in all aspects as per direction of Engineer in charge. (Rate taken from Havells price list w.e.f. 2018). | Itemcode264 | 2 | Nos |
| 265 | 162 | Supply and fixing of smart bright extruded aluminium batten available in 2ft & 4ft run length with multiple lumen packages and suitable for surface, wall & conduit mounting (Non work shop area with accessories). | Itemcode265 | 100 | Nos |
| 266 | 163 | Supply and fixing of smart brite xtra extruded aluminium batten for continuous operation and available in 4ft run length, suitable for surface, wall & conduit mounting (Non work shop area with accessories). | Itemcode266 | 50 | Nos |
| 267 | 164 | Supply and fixing of industrial battens endura LED next flicker free, high efficiency and robust industrial batten family suitable for surface, wall and conduit mounting. The product family offers\ndimmable and connected batten option. | Itemcode267 | 50 | Nos |
| 268 | 165 | Supply and fixing of Dura LED Highbay IP66 & IK08 protected LED Highbay solution with PDC housing, toughened & shattered proof glass available in both narrow & wide beam optics. | Itemcode268 | 10 | Nos |
| 269 | 166 | Supply nad fixing of GreenLED Ultima RoundUltra Sleek recessed downlight for low height false ceiling in round profile. (DN092B LED10S-6500 PSU WH) | Itemcode269 | 10 | Nos |
| 270 | 167 | Supply,of following sizes of PVC sheathed LT XLPE armoured, aluminium 1.1KV grade, as required of the following sizes. | Itemcode270 | ||
| 271 | 167.1 | 4c x 10 sq.mm cable | Itemcode271 | 500 | RM |
| 272 | 167.2 | 4 c x 16sq.mm cable | Itemcode272 | 200 | RM |
| 273 | 167.3 | 3.5 c x 25 sq.mm cable | Itemcode273 | 200 | RM |
| 274 | 167.4 | 3.5 c x 70 sq.mm cable | Itemcode274 | 200 | RM |
| 275 | 167.5 | 3.5 c x 185 sq.mm cable | Itemcode275 | 100 | RM |
| 276 | 167.6 | 3.5 c x 300 sq.mm cable | Itemcode276 | 50 | RM |
| 277 | 168 | Supplying, fixing, testing & commissioning of 415V ,3Phase 50Hz, 4wire system,sheet steel clad,dust & vermin proof cubical & indoor type floor mounted, free standing Main Distribution Board with IP - 42 protection, compartmentalized design and fabricated out of 2mm/1.6mm CRCA sheet steel complete with aluminium Bus Bars, Providing & Fixing of base plate /channel, P/F the following Switchgears,complete with earth Bus Bar throughout the length of the panel,terminal arrangement for incomings/outgoings cables and also outgoing terminations for various sizes of cables,the incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement,adequate size bus duct/cable alley, Sign writing, Painting, Earthing, Numbering, Danger plate etc. Complete as requried,numbering, danger plate etc. complete as required as per specification and drawing. All MCCBs Shall be Ics=100%Icu. Make: Legrand(Adlec) / Tricolite/ Lotus/ Marine Electrical. PTTA Panel. (Light workshop sub pannel PTTA Pannel) | Itemcode277 | ||
| 278 | 168.1 | 1 nos. 100A 415V, Ics=25KA, 4P MCCB with TM release having adjustable O/L, S/C protection. Make: Legrand (DPX3)/ Schneider (Compact NSX) /Siemens (3VL) 1 nos. Digital type multi function meters (V+A+Hz) with cast resin CTs 100/5A. 1 nos TPN surge protection device of class 1& 2, Make: Legrand/Schneider/Siemens, 1 Set of phase indicating lamp with MCB 100A TPN Bus bar of aluminimum alloy. 6 nos. 16/63A, 415V, 4P MCB of 10kA.with O/L and S/C protection. | Itemcode278 | 1 | set |
| 279 | 169 | Supplying, fixing, testing & commissioning of 415V ,3Phase 50Hz, 4wire system,sheet steel clad,dust & vermin proof cubical & indoor type floor mounted, free standing Main Distribution Board with IP - 42 protection, compartmentalized design and fabricated out of 2mm/1.6mm CRCA sheet steel complete with aluminium Bus Bars, Providing & Fixing of base plate /channel, P/F the following Switchgears,complete with earth Bus Bar throughout the length of the panel,terminal arrangement for incomings/outgoings cables and also outgoing terminations for various sizes of cables,the incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement,adequate size bus duct/cable alley, Sign writing, Painting, Earthing, Numbering, Danger plate etc. Complete as requried,numbering, danger plate etc. complete as required as per specification and drawing. All MCCBs Shall be Ics=100%Icu. Make: Legrand(Adlec) / Tricolite/ Lotus/ Marine Electrical. PTTA Panel. (Heavy workshop sub pannel PTTA Pannel) | Itemcode279 | ||
| 280 | 169.1 | 1 nos. 160A 415V, Ics=25KA, 4P MCCB with TM release having adjustable O/L, S/C protection. Make: Legrand (DPX3)/ Schneider (Compact NSX) /Siemens (3VL) 1 nos TPN surge protection device of class 1& 2, Make: Legrand/Schneider/Siemens 1 nos. Digital type multi function meters (V+A+Hz) with cast resin CTs 160/5A. 1 Set of phase indicating lamp with MCB 160A TPN Bus bar of aluminimum alloy. 10 nos. 32A, 415V, 4P MCB of 10kA.with O/L and S/C protection. | Itemcode280 | 2 | Nos |
| 281 | 170 | Supplying, installation, testing & commissioning of modular, fully bolted type, sectionallised Low Voltage Panel suitable for 415 V, 3 Phase, 4 wire 50 Hz AC supply system as per standard IEC 61439- 1 &2 as Total Type Tested Assembly and of suitable size fabricated in compartmentalized design with CRCA sheet steel of 2mm thick for load bearing member and 1.6mm for Non load bearing member. 3mm thick for gland plates. i/c cleaning & finishing complete with 9 tank process (automatic PT spray) for powder coating in approved shade, having suitable rating capacity extensible type TPN Aluminium bus bars of high conductivity as per BOQ, bus bar supports, with short circuit withstand capacity of 50kA for 1 Sec., bottom base frame of 3mm thick (multifold design), fabrication shall be done in trasportable sections, entire LENGTH panel shall have a common earth bar at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of bus bars/Copper Cables and control wiring with 2.5 Sq.mm. PVC insulated copper FRLS conductor S/C cable for voltage & Current respectively, cable alleys, i/c providing following switch gears , Panel shall be suitable for Internal Arc Test 50kA for 400mS as per IEC61641 and Siesmic Zone-IV tested , Mechanical Impact IK08-IK10 as per IEC, ACBs shall have Temperature protection for release & having display with battery backup and 20Faults Trip History : ( The board shall be dust and vermin proof with degree of protection IP 42 )\nMakes : Legrand (XL3)/ Schneider (Blokset)/ Siemens (Sivacon)/L&T (Terra) OEM only | Itemcode281 | ||
| 282 | 170.1 | 1 nos. 630A 415V, Ics=Icu=Icw=50KA, 4P ACB with MP release with LCD display having O/L, S/C , G/F Over temperature and neutral failure protection, release should have minimum 10 Nos fault history for diagnosis of fault, Make: Legrand (DMX)/ Schneider (Masterpact ) /Siemens (3WL), L&T Upower omega. 1 nos. Digital type multi function meters (V+A+Hz) with cast resin CTs 630/5A. Make : Legrand/ Siemens/ Schneider 1 nos. 400A, 415V, FP MCCB of 36kA.with adjustable O/L and S/C protection. Make: Legrand (DPX3)/ Schneider (Compact NSX) /Siemens (3VL) 2 nos. 250A, 415V, FP MCCB of 25kA.with adjustable O/L and S/C protection. Make: Legrand (DPX3)/ Schneider (Compact NSX) /Siemens (3VL) 15 nos. 6-32A, 230V, 4P MCB of 10kA.with O/L and S/C protection. Incommer for APFC Section 1 nos. 200A, 415V, FP MCCB of 36kA.with adjustable O/L and S/C protection. Make: Legrand (DPX3)/ Schneider (Compact NSX) /Siemens (3VL) 125KVAR Capacitor Bank in 8 steps having MCB/MCCB for protection, Contactors as per AC6 Duty for automatic switching, having auto manual switch and indication for each step. | Itemcode282 | 1 | Set |
| 283 | 171 | Supplying and drawing of LSZH UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel PVC conduit as required 4 Pair cat 6 unshielded blue colour conforming to the following standard like ISO/IEC 11801 amendment 2:2010 class EA, TIA/EIA-568-c2 category 6, IEC 61156-5 ETL independent testing, ES50288-6-1 standard cable with 23AWG approved make list Molex, Panduit, Siemon. | Itemcode283 | 1000 | RM |
| 284 | 172 | SITC of Cat-6 information outlet should be 360 degree shielded metal housing following TIA-568-C 2 augmented cat6 ISO 11801 amd 1 class EA, IEC 60603-7 FCC subpart F 68.5 approved make list Molex, Panduit, Siemon. | Itemcode284 | 100 | Nos |
| 285 | 173 | SITC of 24 port Cat 6 patch pannel available with block of four equipped with IO rack mountable 19 modular patch pannel loaded cat 6 UTP 24 port LCS2 rack mountable to be compatible in 4 nos of 6 x RJ 45 connector UTP unit in a block. Approved make list Molex, Panduit, Siemon. | Itemcode285 | 6 | Nos |
| 286 | 174 | SITC of 4 feet Cat-6 UTP 23 AWG patch cord -1 mtr rack end factory crimped patch cord in blue colour. Approved make list Molex, Panduit, Siemon. | Itemcode286 | 165 | Nos |
| 287 | 175 | SITC of 7 feet Cat-6 UTP 23 AWG patch cord -1 mtr rack end factory crimped patch cord in blue colour. Approved make list Molex, Panduit, Siemon. | Itemcode287 | 165 | Nos |
| 288 | 176 | SITC of 1, 2 and 4 port face plate white for I/O fixing at user side for data, voice approved make list Molex, Panduit, Siemon. | Itemcode288 | 165 | Nos |
| 289 | 177 | SITC of 15 u wall mount rack with fans, 2 cable managers, satationary shelf, 2 nos of hardware pkts. Approved make list APW, Rittal, Deliyod. | Itemcode289 | 5 | Nos |
| 290 | 178 | Supply and Installation of rubber insulation mate size 2 x 2 mtr. | Itemcode290 | 10 | Nos |
| 291 | 179 | Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site. | Itemcode291 | 219 | Cum |
| 292 | 180 | Concrete with cement, coarse sand and 40 mm gauge stone ballast in proportion 1:4:8 in foundations and floors including supply of all material, labour and T&P etc. required for proper completion of the work. as per drawings and technical specifications Clause 802, 803, 1202 & 1203 | Itemcode292 | 146 | Cum |
| 293 | 181 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. | Itemcode293 | 1464 | Sqm |
| 294 | 182 | Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing.1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | Itemcode294 | 11 | Cum |
| 295 | 183 | Excavation for Structures Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Ordinary soil Upto 3 m depth | Itemcode295 | 144 | Cum |
| 296 | 184 | Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 (For height upto 5 m) P.C.C. grade M 20 Nominal mix (1:2:4) | Itemcode296 | 22 | Cum |
| 297 | 185 | Brick masonry work in cement mortar in substructure complete excepting pointing and plastering, as per drawing and technical specification Clauses 602, 603, 604, 1202 & 1204 In 1:4 Cement mortar | Itemcode297 | 112 | Cum |
| 298 | 186 | Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204 | Itemcode298 | 442 | Sqm |
| 299 | 187 | R.C.C grade M 20 | Itemcode299 | 28 | Cum |
| 300 | 188 | Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 (The reinforcement steel shall be procured from original (primary) steel producers as per clause no. 2011.3.1 of MORD specifications (First revision'2014) and IS 1786:2008 clause no. 1.6) | Itemcode300 | 2178 | Kg |
| 301 | 189 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil | Itemcode301 | 2050 | Sqm |
| 302 | 190 | Trenching in ordinary soil up to a depth of 60cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling with in a lead of 50m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). | Itemcode302 | 512 | Cum |
| 303 | 191 | Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure(the good earth shall be paid for separately) | Itemcode303 | 2050 | Sqm |
| 304 | 192 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 4.75 mm | Itemcode304 | 31 | Cum |
| 305 | 193 | Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% for payment). | Itemcode305 | 205 | Cum |
| 306 | 194 | Supplying & Stacking of Selection No.1/doob grass at site fresh & free from weeds having proper roots in green including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge. | Itemcode306 | 2050 | Sqm |
| 307 | 195 | Providing and fixing M. S. tree guard 50 cm square in plan, height 1.40 metre above ground level and 0.50 metre below ground level. The vertical members shall consist of four nos of angle iron of size 25x25x5 mm 1.9 long, one at each corner and 8 nos flat iron of size 25x5 mm 1.4 long. The vertical members shall be welded to 4 nos 25x6 mm M. S. flats placed horizontally around the vertical member of the cage. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD/ any other approved name. The tree guard shall be fixed to the ground by making suitable holes and by embedding four corners leg in the ground, including refilling the earth, compaction etc. complete. The tree guard shall be painted with two coats of paint of approved brand and manufacture over a coat of primer, complete in all respect. | Itemcode307 | 40 | Each |
| 308 | 196 | Providing and Displaying Cineraria dwarf in different colour with fresh & healthy foliage well developed in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. | Itemcode308 | 40 | Nos |
| 309 | 197 | Providing and Displaying Marigold jaffri orange/yellow/Russet colour well developed with fresh & healthy foliage with 40 to 50 flowers in bloom specimen plant 60 to 75 cm ht in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. | Itemcode309 | 40 | Nos |
| 310 | 198 | Providing and laying 80 mm thick faciory made cement concrete interlocking paver block of M -40 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | Itemcode310 | 178 | Sqm |
| 311 | 199 | Wastewater Management – Disposal of septic sludge (Existing block=02) | Itemcode311 | 5 | Sqm |
| 312 | 200 | Construction of secure, impervious storage area for HSD and other chemicals | Itemcode312 | 100 | Sqm |
| 313 | 201 | Air monitoring (pre construction) | Itemcode313 | 1 | Each |
| 314 | 202 | Noise Monitoring (pre construction) | Itemcode314 | 1 | Each |
| 315 | 203 | Drinking Water Monitoring (pre construction) | Itemcode315 | 1 | Each |
| 316 | 204 | Air monitoring (During construction) | Itemcode316 | 2 | Each |
| 317 | 205 | Noise Monitoring (During construction) | Itemcode317 | 2 | Each |
| 318 | 206 | Drinking Water Monitoring (During construction) | Itemcode318 | 2 | Each |
| 319 | 207 | EHS Onsite training cost (During construction) | Itemcode319 | 1 | Each |
| 320 | 208 | Water Sprinkling is to minimize the dust pollution during construction activities.During summer season (or as and when required) | Itemcode320 | 100 | Hrs |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
