Sales : +91-777 804 8217
| Name of Work: Construction of Additional Accommodation for Govt. Degree College at Baroh in Ditt.Kangra, (Himachal Pradesh). DEPOSIT WORK.(SH:-Construction of Civil work including Water Supply & Sanitary Installation, Rain Water Harvesting System, Septic tank & Soak pit etcetera;) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in foundation, trenches etcetera. in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, shoring, strutting or bailing out water (Surface and sub soil water) upto any depth or height any quantum of water including de-watering removal of slush, lift upto any height, stacking the excavated soil clear from the edge of excavation and then retuning the stacked soil in 15cm (Fifteen centimetre) layers, when required into plinths, sides of foundation etcetera; consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1136.57 | Per cubic metre | |
| 2 | 2 | Excavation in drains and channels etcetera; in earth work in all kind of classification of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting and work doing in saturated soil including chiseling or wedging out rocks where blasting work is prohibited including shoring, strutting and pumping or bailing out water (Surface and sub soil water) upto any depth or any height any quantum of water including slush which may arrise during dewatering any other mixed variety of soil, lift upto any height, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layer when required into plinths, sides of foundations etcetera; consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per specifications, approved drawing, design, specification and as per the entire satisfaction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 38.66 | Per cubic metre | |
| 3 | 3 | Stone filling in plinth dry hand packed with hard stone of approved quality under floor including watering, ramming, consolidating and dressing complete as per specifications, approved drawing, design as per entire satisfactions and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 85.88 | Per cubic metre | |
| 4 | 4 | Sand filling under floor including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 10.69 | Per cubic metre | |
| 5 | 5 | Stone filling under the filter tank of size 63mm to 40mm (Sixty three millimetre into Forty millimetre) size including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1.12 | Per cubic metre | |
| 6 | 6 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 235.78 | Per square metre | |
| 7 | 7 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings and the like as per Architectural drawing, design and specifications including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 2396.98 | Per square metre | |
| 8 | 8 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etcetera; with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders lintels where ever required sides and soffits of beams haunchings cantilevers bressumers and lintels upto all depths including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1855.75 | Per square metre. | |
| 9 | 9 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts square rectangular polygonal in plan including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1236.7 | Per square metre. | |
| 10 | 10 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetre) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetre),so as to give a fair finish including centring, shuttering strutting and propping etcetera with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in vertical fins and vertical sun breakers complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 27.2 | Per square metre | |
| 11 | 11 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetre) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetre),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 125.7 | Per square metre. | |
| 12 | 12 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in edges of slab and breaks in floors and walls under any thickness including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 580.1 | Per running metre | |
| 13 | 13 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetre)thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetre),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surface such as walls(any thickness) partitions and the like including attached, pilasters, buttresses, plinth and string courses and the like including entire carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 153.21 | Per square metre | |
| 14 | 14 | Providing and laying cement concrete 1:4:8 (One cement; four sand; eight graded crushed stone aggregate 40mm (Forty millimetre) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 71.78 | Per cubic metre | |
| 15 | 15 | Providing and laying cement concrete 1:6:12 (One cement : Six sand : Twelve graded broken/crushed stone aggregate 40mm (Forty millimetre) nominal size mechanically mixed and curing complete excluding cost of forms work centring, shuttering in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 55.82 | Per cubic metre | |
| 16 | 16 | Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm (Twenty Newton per square millimetre with cement contents not less than 330 kg (Three hundred thirty kilogram) per cubic meter to give an smooth surfaces mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in foundation, footings, bases of columns and the like mass concrete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 224.76 | Per cubic metre | |
| 17 | 17 | Providing and laying cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum comressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girder, bressumers and cantilevers in all depths/thickness upto all floor level, as per specifications, approved drawing, design as per entire satisfaction and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 612.15 | Per cubic metre | |
| 18 | 18 | Providing and laying cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars posts and struts in all depth/thickness for all floors heights as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge including incidents. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 126.24 | Per cubic metre | |
| 19 | 19 | Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in vertical and horizontal walls/fins (thickness not more than 0.10m) (Zero point one zero metre) including attached pilasterd buttersses plinth and string courses etcetera. from top of foundation individually or forming box louvers and projected band upto all floor level as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 2.72 | Per cubic metre | |
| 20 | 20 | Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in Stair cases (except spiral stair cases) excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor levels as per specifications, approved drawing, design including carriage of material within all heights leads, lifts and other incidentals and as directed by the Engineer-in-charge including incidents. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 24.22 | Per cubic metre | |
| 21 | 21 | Providing and laying upto floor level reinforcement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) mechanically mixed and vibrated including curing complete but excluding the cost of reinforcement as in walls any thickness but not less than 0.10 mtrs (Zero decimal One Zero metre) thickness, including attached buttresses, pilaster and their caps and bases and string courses etcetera as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 20.13 | Per cubic metre | |
| 22 | 22 | Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter, mechanically mixed, vibrated and curing complete for reinforced concrete Chhajjas for all thickness in all floor levels up to all heights including finishing the exposed surface with cement mortar 1:3 (One cement : Three sand) to give a smooth and even surface including centering/ form work but excluding the cost of reinforcement for reinforced concrete work up to all floor levels up to all height as per direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design and specifications. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 34.92 | Per cubic metre | |
| 23 | 23 | Providing and laying cement concrete work M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilogram) per cubic metre mechanically mixed and vibrated to give smooth and even surfaces including centring, shuttering but excluding the cost of reinforcement as in mouldings, cornices, windows sills etcetera to any girth, as per specifications, drawing and design complete, as directed by the Engineer-in-charge.upto floor all levels including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 27.16 | Per cubic metre | |
| 24 | 24 | Providing and laying Tor steel reinforcement of TATA/Sail/Tisco for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto all floor levels as per specifications, approved drawing, design, as per entire satsfaction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 191627 | Per kilo-gram | |
| 25 | 25 | Square rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in cement mortar 1:6 (One cement : Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge including incidents. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 36.5 | Per cubic metre | |
| 26 | 26 | Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including rakcking out joints with cement mortar 1:5 (One cement : Six sand) and curing complete within all heights leads, lifts of material and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge.The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 9.72 | Per cubic metre | |
| 27 | 27 | Providing and laying Damp Proof Course 100mm (One hundred millimetre) thick with cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate) 12.5mm (Twelve decimal five millimetre nominal size) thick and curing complete, as required at site including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 82.14 | Per Square metre | |
| 28 | 28 | Applying a coat of hot bitumen mexphalt 80/100 (Eighty/Hundred) VG-10 using 1.70 Kg (one decimal seven zero Kilogram) per square metre on Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 82.14 | Per Square metre | |
| 29 | 29 | Providing and laying Precast cement concrete Jali of NTC, reinforced with 1.6mm (one point six millimetre) dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (one cement: three fine sand) etcetera complete, excluding plastering of the jambs, sills and soffits etcetera. complete and soffits 50mm(fifty millimetre) thickness including necessary fitting complete within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 54.4 | Per Square metre | |
| 30 | 30 | Second class brick masonry using common burnt clay building bricks in super-structure upto any heights in all floor level in cement mortar 1:6 (One cement: Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 369.2 | Per Cube metre | |
| 31 | 31 | Second class brick masonry using common burnt clay building bricks with Rat Trap brick wall in super-structure upto any heights in all floor level in cement mortar 1:6 (One cement: Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 111.34 | Per Cube metre | |
| 32 | 32 | Second class half brick masonry using common burnt clay building bricks with hoop iron in super-structure upto any height in all floor levels in cement mortar 1:4 (One cement: Four sand) and curing complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 589.82 | Per square metre | |
| 33 | 33 | Brick work using common burnt clay building bricks in foundation and plinth in Mud Mortar complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 0.3 | Per Cube metre | |
| 34 | 34 | Supplying and laying at site crushed stone aggregate 40mm (Forty millimetre) nominal size in soakpit including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 30.7 | Per Cube metre | |
| 35 | 35 | Providing and fixing 35mm (Thirty five milimetre) thick factory made flush door shutters both side commercial i.e non-decorative (Phenol bonded termite resistant and boiling water proof, core of black-board construction with frame of first class hard wood and well matched commercial three ply veneer with vertical grains of cross bands and face veneer on both faces of flush door shutter ISI marked IS No-2202 of Century ply Board/Kit ply, Green ply complete including carriage of material within all leads, lifts and other incidentals as per specifications approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 115.92 | Per square metre | |
| 36 | 36 | Providing and fixing 40mm (forty millimetre) thick panelled and glazed shutter of first class deodar wood having infill panel of 12mm (Twelve millimetre) thick prelaminated water proof BWP phenol bonded board below lock rail and 5mm (Five millimetre) thick glass of Saint Gobin or Modi gaurd above lock rail for door including bright finished/black enamelled iron butt hinges with necessary screws complete as per specifications, approved drawing design and as directed by the Enginee-in-charge within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 12.96 | Per square metre | |
| 37 | 37 | Providing and fixing 19mm (Nineteen millimetre) thick water proof termite resistant commercial board of Uni ply /Green ply ISI marked IS No. 1659 for shutter. All cut portions of the board shall have 6/12mm (Six/Twelve millimetre) thick hard wood edging and outer side of the shutter to be finished with 1mm (One millimetre) thick lamination ISI marked IS No. 12823 of Kit Vista of Kit ply and approved shade with butt joints and fixing nails and screws etcetera upto all floor level complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. (Lamination and hard wood edging to be measured and paid for separately). The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 32 | Per square metre | |
| 38 | 38 | Providing and fixing 19mm (Nineteen milimetre) thick water proof commercial board in shelves/box of cup board ISI marked IS No. 1659 of ply for cup board and all cut portions of the board shall have 6mm (Six millimetre) thick hard wood edging and back side of cup board shall have 6mm (Six millimetre) thick plywood lining with butt joints & fixing with nails & screws etcetera complete including entire carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by the Engineer-in-Charge. (Hard wood edging to be measured and paid for separately). The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 36.6 | Per square metre | |
| 39 | 39 | Providing and fixing 6mm (Six millimetre) thick ply wood lining of Uniply/Green ply ISI marked with butt jointing (frame work and cover fillets to be measured and paid for separately) complete including entire carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 36.6 | Per square metre | |
| 40 | 40 | Providing and fixing 6/12mm (Six/Twelve milimetre) thick hard wood edging cover fillets (beading) including mitring at junction with wood screw and nail complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 67.2 | Per Running metre | |
| 41 | 41 | Providing and fixing 1mm (One milimetre) thick coloured or plain laminated sheet ( Sunmica) ISI marked IS NO. 12823 of Kitvista Kit ply sheet with approved adhesive and nails & screws etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 32.8 | Per square metre | |
| 42 | 42 | Providing and laying 20mm (Twenty milimetre) thick granite stone of approved shade in work top over 20mm (Twenty milimetre) thick base of cement mortar 1:3 (1 cement:3 sand) including jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the shade of granite stone complete including semi/round nosing, moulding, polishing and carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 16.56 | Per square metre | |
| 43 | 43 | Providing and fixing Blackboard 12mm (Twelve millimetre) thick green chalk board (non megnetic) with superior quality framing specially designed aluminium profile 20x15mm (Twenty into Fifteen milimetre) with corners of black plastic shall be provided. The board surface shall be non porus ceramic particles on the top of green surface for smooth writting with chalk. The board shall be fixed on the wall with specially designed clamps and square clamps with the help of nylon sleves. The board shall be backing material of galvanised sheet of 0.28mm (Zero point Twenty eight millimetre) and 11mm (Eleven millimetre) thick particle board having size 240x120cm (Two hundred forty into One hundred twenty centimetre) including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 8 | Each | |
| 44 | 44 | Providing and fixing M.S. (mild steel) grill of required pattern in MS (mild steel) frames of windows etcetera with M. S flat 20x5mm (Twenty into Five milimetre), square bars in combination as per detail with round headed bolts and nuts or by screws complete including entire carriage of material within all leads, lifts and other incidentals,as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 4342 | Per Kilo-gram | |
| 45 | 45 | Providing and fixing 65x35mm (Sixty five into Thirty five milimetre) size special quality chromium plated brass cup board lock with six leavers including necessary screws etcetera complete (Indian make) including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 32 | Each | |
| 46 | 46 | Providing and fixing 300x16mm (Three hundred into Sixteen millimetre) size aluminium oxidised Pilot/sheel sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etcetera including carriage of material within all leads, lifts and other. incidentals. as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 58 | Each | |
| 47 | 47 | Providing and fixing 150x10mm (One hundred fifty into Ten millimetre) nominal size aluminium oxidised Pilot/sheel Tower bolts (Barrel type) anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 496 | Each | |
| 48 | 48 | Providing and fixing 200x10mm (Two hundred into Ten millimetre) nominal size aluminium Tower bolts of Pilot/sheel (Barrel type) anodized transparent of dyed to required colour and shade with nuts and screws etcetera complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 116 | Each | |
| 49 | 49 | Providing and fixing 125mm (One hundred twenty five millimetre) nominal size aluminium Pilot/Sheel oxidized seccuolar anodized transparent or dyed to required colour and shade handles with necessary screws etcetera complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 116 | Each | |
| 50 | 50 | Providing and fixing 19mm (Ninteen milimetre) thick water proof commercial board of Uni - ply/Green ply for SDB shutter with 6mm hard wood edging and 0.63mm (Zero decimal sixty three milimetre) thick P.G.I. sheet lining on the inner side of the shutter and outer side of the shutter shall be finished with 1mm (One millimetre) thick lamination of Kitvista of Kit ply including fixing with nickel plated piano hinges with screws etcetera complete including carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 27.75 | Per square metre | |
| 51 | 51 | Providing and fixing aluminium handles of approved quality to required colour and shade with the necessary screws etcetera complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 52 | 51.1 | 100mm (One hundred millimetre) nominal size | 528 | Each | |
| 53 | 51.2 | 75mm (seventy five millimetre) nominal size | 10 | Each | |
| 54 | 52 | Providing and fixing M.S. (Mild steel) hooks and eyes of 250mm (Two hundred fifty millimetre) size of approved quality to required colour and shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 168 | Each | |
| 55 | 53 | Providing and laying 40mm (Forty milimetre) thick cement concrete flooring 1:2:4 (One cement : Two sand: Four graded crushed stone aggregate 20mm (twenty milimetre) nominal size laid in one layer finished with a floating coat of neat cement complete upto all floor level, including entire carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 15.98 | Per square metre | |
| 56 | 54 | Providing and laying 25mm (Twenty five millimetre) thick Kota Stone flooring (Mirror polished) 55x55cms (Fifty five into fifty five centimetre) size of approved shade over base of cement mortar 1:4 (One cement: Four sand) laid over and jointed with Grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, moulding single or double nosing complete including carriage of material within all leads, lifts and other. incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 887.01 | Per square metre | |
| 57 | 55 | Providing and laying 20mm (Twenty millimetre) thick Baroda Green Marble of required shade laid on bed of with semi / round moulding and nosing complete in flooring laid over 20mm (Twenty milimetre) thick cement mortar 1:3 (1 cement:3 sand) including jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the shade of marble complete upto all floors levels including entire carriage of material within all leads, lifts and other. incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 18.99 | Per square metre | |
| 58 | 56 | Providing and fixing vibro hydraulic compressed and polished 300x300x25mm (Three hundred by three hundred by twenty five millimetre) polished terrazzo tiles of NTC ISI marked No-1237, top layer in 70% (Seventy percent) white, 30% (Thirty percent) grey cement. The ratio of chips shall be 55% (Fifty five percent) white chips and 15% (Fifteen percent) each maroon, yellow & dark green shade. The size of chips shall be O,B,2B in floor, treads of steps and landing llaid on a bed of 25mm (Twenty five millimetre) thickness of cement mortar 1:6 (One cement : Six sand) jointed with neat cement slurry mixed with pigment to match the shade and colour of tiles (wherever required) including rubbing, polishing, nosing and moulding upto all floor levels complete including entire carriage of material within all leads, lifs and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 979.05 | Per square metre | |
| 59 | 57 | Providing and laying red sand stone slab flooring 40mm (Forty milimetre) average thick on 20mm (Twenty milimetre) average thick base of cement mortar 1:4 (One cement : Four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, moulding and granite polish finish complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 6.6 | Per square metre | |
| 60 | 58 | Providing and laying ceremic tiles (Non-slippery) of Kajaria/NITCO/Orient-Bell/Rak in flooring 300x300mm (Three hundred into Three hundred millimetre) size laid on a bed of 12mm (Twelve millimetre) thick cement mortar 1:3 (One Cement : Three Sand) finished with flush pointing in white cement as per architect standred design and specification complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 14.25 | Per square metre | |
| 61 | 59 | Providing and laying 25mm (Twenty five milimetre) thick mirror polished kota stone slab in risers of steps, skirting, dado and pillars laid on a bed of 12mm (Twelve milimetre) (Average) thickness cement mortar 1:3 (One cement : Three sand) and jointed with Grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, nosing, moulding and entire carriage of material within all leads, lift and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 109.4 | Per square metre | |
| 62 | 60 | Providing and laying heavy duty vetrified tiles of Nitco/Kajaria/Orient/Bell/Rak 605mmx605mmx10mm (Six hundred five millimetre into Six hundred five millimetre into ten millimetre) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement : Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 387.72 | Per square metre | |
| 63 | 61 | Providing and laying matt finished vetrified tiles 605x605x10mm (Six hundred five into Six hundred five into ten millimetre) of approved shade in skirting, riser of steps and dado laid on a bed of 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per approved drawing, desgn and specifications including entire carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 16.89 | Per square metre | |
| 64 | 62 | Providing and fixing glass stip 40mm (Forty millimetre) wide and 4mm (four millimetre) thick in flooring and plinth protection complete including carriage of material within all leads, lifts and other incidentals, as per architect drawing, design and specification and as per the directions of the Enginee-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 173.7 | Per Running metre | |
| 65 | 63 | Providing and laying coloured glazed tiles 6mm (Six millimetre) thick of IS quality 20x30cm (Twenty into Thirty centimetre) of Orient -Bell/Kajaria / Rak of approved shade in skirting, riser of steps and dado laid on 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement : Three sand) and jointed with cement slurry including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 551.14 | Per square metre | |
| 66 | 64 | Providing and laying 300x300mm (Three hundred into three hundred millimetre) precast terrazzo tiles vibro hydraulic compressed 25mm (Twenty five millimetre) thick (with marble chips of specified sizes) in skirting, risers of steps and dado laid on 12mm (Twelve millimetre) thick cement mortar 1:3 (1 cement : 3 sand)jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) with rubbing and polishing complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.. | 63.3 | Per square metre | |
| 67 | 65 | Providing and laying heavy duty precast cement concrete 60mm (Sixty millimetre) thick interlocking paver blocks ISI marked of NTC IS No-15658 vibro compacted upto M-35 (M-Thirty five) grade in PVC/fibre moulds including border or kurb block Grey or coloured over sub-base of concrete with 25mm (Twenty five millimetre) thick cement mortar 1:4 (One cement : Four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete (sub-base of concrete floor to be paid for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 175 | Per square metre | |
| 68 | 66 | Providing 20mm (Twenty millimetre) thick cement plaster skirting upto 30cm (Thirty centimetre) height with cement mortar 1:3 (One cement : Three sand) and finished with a floating coat of neat cement including rounding of junction with floor and carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 3.41 | Per square metre | |
| 69 | 67 | Providing and laying terrezzo chequred tile 300x300x25mm (Three hundred into three hundred into twenty five millimetre) thick laid on 20mm (Twenty millimetre) average thick base of cement mortar 1:4 (One cement : Four sand) and jointed with grey cement slurry mixed with pigment to match the shade of the tile including rubbing and noising complete as per architect standred design and specifications including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.\n \n | 10.8 | Per square metre | |
| 70 | 68 | Providing and fixing 0.60mm (Zero decimal Six Zero milimetre) thick prepainted sheet in roofing over steel truss of kolar metal / TATA Durashine prepainteed single skin trapezoidal profile sheating 0.60mm (Zero point sixty millimtere) thickness heaving 1060mm (One thousand sixty millimetre) covered width over all width 1126mm (One thousand one hundred twenty six millimetre) 28mm (Twenty eight millimetre) crest depth at 353+2 (Three hundred fifty three plus two) centre to centre crest distance. There will be two ribs at the centre for stiffening having crest depth of 2.5mm (Two point five millimetre). The main crest width at top 25mm (Twenty five millimetre) and at lower 81mm (Eighty one millimetre). The base metal of cold rolled steel coil should have zinc coating and hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster paint of 5 (Five) microns primer coating including fixing with prepainted self drilling and taping iron J or L hooks,bolts and nuts 6mm (Six milimetre) diametre with prepainted limpet and rubber washers complete as per specifications, approved architectural drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1291.7 | Per square metre | |
| 71 | 69 | Providing and fixing ridges or hips 60 cm (Sixty centimetres) over all with 0.60mm (Zero decimal Sixty milimetre) thick prepainted steel sheet of kolar metal TATA Durashine/Sail/Jindal ridges (Factory made) shall having proper Gola/Shape of steel sheet with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating plus back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted self drilling and taping iron J or L hooks, bolts and nuts 6mm (Six milimetre) diametre with prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved architectural drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 75 | Per running metre | |
| 72 | 70 | Providing and fixing valleys 90 cm (Ninety centimetres) over all with 0.60mm (Zero decimal Six zero milimetre) thick prepainted sheet TATA Durashine/Sail/Jindal in roofing with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester organic coating of 20 (Twenty)microns primer coating back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted self drilling and taping iron J or L hooks, bolts and nuts 6mm (Six milimetre) diametres with prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 40 | Per running metre | |
| 73 | 71 | Providing and fixing 30cm (Thirty centimeter) wide 30cm (Thirty five centimeter) deep of 0.60mm (Zero decimal six zeo millimetre) thick plain G.I. (Galvanised Iron) sheet gutter with dome shape grating including bolts, nuts and washers etcetera and making necessary connections with rain water pipe complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved architectural drawing, design and as directed by the Engineer-in-charge complete. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 145.3 | Per running metre | |
| 74 | 72 | Providing and fixing plain M.S. (mild steel) B.P. (Black Plain) sheet 2mm (Two millimetre) thick fixed in eaves board/ceiling/cutting soffits/ceiling including jointing with gas/electric welding in position and applying a coat of red lead primer complete (frame work is to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 216.6 | Per square metre | |
| 75 | 73 | Providing and fixing 110mm (One hundred ten millmetres) dia pipes on wall face P.V.C (D-Plast) rain water ISI marked of Finolex/Relpipe/Superme of working pressure not less than 6.0 kg/cm2 (Six point zero kilogram per sqaure centimetre) high density pipe including filling the joints with approved adhesive complete as per specifications and as directed by the Engineer-In-charge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 190.315 | Per running metre | |
| 76 | 74 | Providing and fixing on wall face P.V.C. (D-plast) acessories for rain water pipes working pressure 6 kg/cm2 (Six kilogram per square centimetre) IS marked of Finolex/ Relpipe (Reliance) Supreme class-B un plastisized PVC D-Plast high denesity pipe confiming to ISI Code 13592-1992 for rain water pipe fixed with approved adhesive including filling the joints and carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 77 | 74.1 | 110mm (One hundred ten milimetre) diameteres PVC Plain bend | 12 | Each | |
| 78 | 74.2 | 110mm (One hundred ten milimetre) diameteres PVC Plain shoe | 24 | Each | |
| 79 | 75 | Providing and fixing M.S. holder bat clamps of approved design to PVC rain water pipe embedded in cement concrete blocks 10x10x20cm (Ten into Ten into Twenty centimetre) of 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty millimetre) nominal size including cost of cutting holes and making good the walls complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 80 | Each | |
| 80 | 76 | Providing and fixing flashing 38cm (Thirty eight centimetre) overall with 0.60mm (Zero point six zero millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted self drilling and taping iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per specifications, approved drawing, design and as per the direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 22.28 | Per Running metre | |
| 81 | 77 | Steel work welded in built up sections, joints channels, angles, tees, frame work for ceiling/false ceiling flats with connecting plates or angles, cleat as in trusses, trussed purlins, main and cross beams, hips, jack rafters, purlins connected to common rafters and the like of TATA/SAIL in building including cutting, fixing, lifting, hoisting and; placing in position and applying a coat of red lead paint complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 284.17 | Per quintal | |
| 82 | 78 | Steel work welded in built up sections trusses and framed work, including cutting, fixing, lifting, hoisting and; placing in position of TATA/SAIL and applying a coat of red lead paint in gratings, framed gaurd, bars, ladders, railing, brackets and similar work, including entire carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 4.89 | Per quintal | |
| 83 | 79 | Providing and fixing angle iron door frames (Single rebate) manufctured from M.S angle section of 35x35x4mm and M.S. flat 50x4mm (fifty into four millimetre) in combination as per design and drawing including jamb, lock jamb, bead and if required angle threshold of M.S. angles 50x5mm welded or rigidly fixed by mechanical means lugs with split ends to each jamb includng steel butt hinges 2.5mm (Two point five millimetre) thick with a provision of locking arrangment and shock absorber as specified and applying a coat of approved steel primer after pre-treatment of the surfaces including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 163.9 | Per Running metre | |
| 84 | 80 | Providing and fixing doors/windows frame manufactured from M.S. channel section 75x40x4mm (seventy five into Forty into four millimetre) nominal size with M.S. flat 75x4mm (Seventy five into four millimetre) as per drawing and design including hinges, jambs, lock, jambs bead and threshhold of M.S. angle 50x25mm (Fifty into Twenty five millimetre) welded or rigidly fixed by mechanically and embedded in cement concrete blocks 15x10x10cm (Fiftenn into ten into ten centimetre) size of 1:3:6 (One cement : three sand : six graded stone aggregate 20mm (Twenty millimetre nominal size) or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings, including providing and fixing glass panes with glazing clips and special metal sash putty of approved make complete including applying a priming coat of red lead paint complete as directed by the Engineer–Incharge . The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 982.4 | Per running metres | |
| 85 | 81 | Providing and fixing angle iron frames manufactured from M.S. Angle iron section 25x25x5mm (Twenty five into Twenty five into Five millimetre) size including hinges jamb,lock jamb,beed and if required angle threshold of mild steel angle 25x25mm (Twenty five into Twenty five millimetre) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (Two decimal Five millimetre) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after pretreatment of the surface complete in all respect as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 44.4 | Per running metre | |
| 86 | 82 | Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections jointed mitred and welded with 16x3.15mm(Sixteen into three decimal fifteen milimetre) lugs 10cm (Ten centimetres) long embeded in cement concrete blocks 15x10x10cm (Fifteen into Ten into Ten centimetre) size of 1:3:6 (One cement isto Three Sand isto Six graded stone aggregate 20mm (Twenty milimetre) nominal size or with wooden plugs and screws or rawl plug and screws or with fixing clips or bolts and nuts as required and iron fittings, including providing and fixing 5mm thick of Modiguard or Saint Gobin glass panes with glazing clips and special metal sesh putty of approved make complete including applying a coat of read lead paints as per specifications and as per direction Engineer-In-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 87 | 82.1 | For fixed shutter | 234.47 | Per square metre | |
| 88 | 82.2 | For side hung shutter | 115.617 | Per square metre | |
| 89 | 83 | Providing and laying double coat water proofing treatment done with Dr Fixit felt over depressive toilet area including maintain clean and saturated surface a coverage of 6-Sq. ft (Sir aquare feet) per kg to achieve 1mm (One millimetre) thickness. This coating shall also be extended upto 300mm vertically . The second coat shall be applied of first coat. Then sprinkle sand on top surface of applied Dr. Fixit- Fastflex while still tacky over the second coat. Then apply cement mortar 1:4 (one cement & four sand) admixed with 200ml of Pidiproof LW@200ml/50 kg of cement over the floor with the suitable gradient towards drain pipe, while the second coat of Dr. Fixit is still tacky complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 99.79 | Per square metre | |
| 90 | 84 | Providing and fixing readymade M.S. hollow pipe stair railing (D-Section) welded with M.S. Horizontal flat (40x4mm (Forty into four millimetre) thick through out over balluster having size 19x19mm (Nineteen into Nineteen millimetre) and 12x12mm (Twelve into Twelve milimetre) M.S. solid square bars in combination with M.S. flat 40x6mm (Forty into Six milimetre) with a clear height of 85cm (Eighty five centimetres) at the rate of 60cm (Sixty centimetre) centre to centre jointing in cement concrete steps and welded with electric gas welding at top along with hand rail of (SWG-16) and vertical M.S. solid square bars baluster complete with a priming coat of red lead paint including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 78 | Per running metre | |
| 91 | 85 | Providing and fixing railing in corridoor wall having baluster of 20x20mm (twenty into twenty millimeter) solid square bars clear heights 45cm (fourty five centimeter) @ 20cm(twenty centimetre) center to center embedding in cement concrete and jointing with electric /Gas welding at top and bottom with 2 (Two) Numbers M.S. flat of 50x6mm (Fifty into six millimeter) and having RCC coping above railing as per drawing including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 87 | Per Running metre | |
| 92 | 86 | Providing and fixing M.S. hollow pipe 50mm (Fifty millimetre) diametre hand rail slip resistant with round ended at two level at 75 and 90cm (Seventy five and ninety centimetre) height welded with 25mm (Twenty five millimetre) diametre hollow pipe baluster embedded in cement concrete 60cm (sixty centimetre) centre to centre and jointing with electrical gas welding at top alongwith hand rail of M.S. hollow pipe of 50mm (Fifty millimetre) diametre (SWG-16). The baluster welded/jointed with each with 2 Nos (Two Numbers) M.S. flat of 50x5mm (Fifty into five millimetre) complete including applying a priming coat of red lead paint as per specification and as per direction of Engineer-Incharge including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 21 | Per running metre | |
| 93 | 87 | Applying priming coat over new steel and other metal surfaces with Nerolac/ Asian paint after and including preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matters sand papering and knotting with ready mixed priming paint brushing red lead oxide including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 388.66 | Per square metre | |
| 94 | 88 | Painting two or more coats (excluding priming coat) with Nerolac/ Asian paint on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 816.94 | Per square metre | |
| 95 | 89 | Applying priming coat over new wood and wood based surfaces with Nerolac/ Asian paint after and including preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matters sand papering and knotting with ready mixed paint brushing wood primer pink including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 331.98 | Per square metre | |
| 96 | 90 | Painting two or more coats (excluding priming coat) over new wood and wood based surfaces with Nerolac/ Asian paint of approved shade brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters including carriage of material wthin all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 331.98 | Per square metre | |
| 97 | 91 | 6mm (Six milimetre) thick cement plasters in ceiling with cement mortar 1:3 (One cement: Three sand) for all heights in all floor including carriage of material wthin all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 2175.35 | Per square metre | |
| 98 | 92 | 15mm (Fifteen millimetre) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering including arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) above plinth level to floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1683.08 | Per square metre | |
| 99 | 93 | 15mm (Fifteen millimetre) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering including arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) above plinth level to floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1683.08 | Per square metre | |
| 100 | 94 | 15mm (Fifteen millimetre) thick cement plasters in single coat on brick/concrete/stone walls for exterior plastering including arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth with cement mortar 1:5 (One cement: Five sand) above plinth level to floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1798.14 | Per square metre | |
| 101 | 95 | 15mm (Fifteen millimetre) thick cement plasters in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth with cement mortar 1:3 (One cement: Three sand) above plinth level to floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 77.9 | Per square metre | |
| 102 | 96 | Providing and fixing 12mm (Twelve millimetre) thick Unistone cladding on R.C.C.surface side as on faces of Arch masonry walls etcetera over 12mm thick cement plaster 1:3 (One cement : Three sand) and jointed with cement slurry including scaffolding etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 136.82 | Per square metre | |
| 103 | 97 | Finishing wall with apex weather proof exterior grade emulsion of Asian paints/Nerolac suraksha on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etcetera including sand paper smooth and carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1798.14 | Per square metre | |
| 104 | 98 | Applying Birla J.K. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropings, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 5043.12 | Per square metre | |
| 105 | 99 | Wall painting (two coats) with premium enamel paint of Asian/Nerolac paint of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface smooth complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1172.47 | Per square metre | |
| 106 | 100 | Distempering (two coats) with Oil bound washable distemper of Nerolac/Asian paint of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matters and also including preparing the surface even and sand papered smooth including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 2284.16 | Per square metre | |
| 107 | 101 | Wall painting (two coats) with premium enamel paint of Asian/Nerolac paint of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface smooth complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1021.79 | Per square metre | |
| 108 | 102 | Distempering (two or more coats) with synthetic / acrylic washable distemper of Nerolac/ Asian paint of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth.priming coat with distemper primer including entire carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 382.65 | Per square metre | |
| 109 | 103 | Providing under layer for plinth protection of 75mm (Seventy five millimetre) thick bed of dry brick/stone aggregate 40mm (Forty milimertres) nominal sizes well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material within all leads, lifts of material and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 130.59 | Per square metre | |
| 110 | 104 | Providing plinth protection 50mm (Fifty milimetre) thick cement concrete 1:3:6 (One cement: Three sand: Six graded crushed stone aggregate 20mm (Twenty milimetre) nominal size including finishing the top surfaces of concrete smooth complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 130.59 | Per square metre | |
| 111 | 105 | Construction of C.C. covered in cement concrete 1:3:6 (One cement : three sand : six graded crushed stone aggregate) including earth work shuttering and cast in-situ RCC slab over drain and cement concrete flooring 1:2:4 (One cement : two sand : four graded crushed stone aggregate) and finished with a floating cost of neat cement complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 167.8 | Per square metre | |
| 112 | 106 | Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of filled up with polysterence back or rod base members, self aligning / centering arrangement and support . The material shall be as such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight with polysterence back or rod surfaces mechanically snap locking the multicellular to facilitate movement as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 91.2 | Per running metre length 12mm thick and one centi-metre deep | |
| 113 | 107 | Providing and fixing 20mm (Twenty milimetre) thick Aphony fibril with colour of approved shade of size 600x1200mm (Six hundred into One thousand two hundred millimetre) Dennune acoustical/Himalyan Acoustical to be installed on G.I stud 2400x50mm (Two thousand four hundred into Fifty millimetre) web flanges 15 & 50mm (Fifteen & Fifty milimetre) fully knured with the backing of 50mm (Fifty milimetre) thick absorb wool/insulation complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 384.12 | Per square metre | |
| 114 | 108 | Providing and fixing 600x600mm (Six hundred into six hundred millimetre) everest designer fiber board ceiling tiles fixed over ready made powder coated metal T-Grid system incluing jointing and filling complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 44.73 | Per square metre | |
| 115 | 109 | Providing and fixing table including benches in lecture hall made of hard wood board 20mm (Twenty millimetre) thick on top, shelves, seat and back vertical rest fixed with beading of size 70x72mm (Seventy into Seventy two millimetre) and 31x60mm (Thirty one into sixty millimetre) and sqaure bar 25x25mm (Twenty five into twenty five millimetre) including frame of angle iron 40x40x6mm (Forty into forty into six millimetre) and 50x50x6mm (Fifty into fifty into six millimetre) and channel 75x40mm (Seventy five into forty millimetre) size of fixed in position complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 180 | Each | |
| 116 | 110 | Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including rakcking out joints with cement mortar 1:3 (One cement : Six sand) and curing complete within all heights leads, lifts of material and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 36.59 | Per cubic metre | |
| 117 | 111 | Providing and fixing Polythyelene – Aluminium -Polyethylene (PE-AL-PE) composite pressure pipe of Kitec U.V. stabilized with carbon black Conforming to IS-15450-2004 for water supply including clamp at appropriate spacing, cutting, fixing and making good the wall etcetera but excluding the cost of fittings (internal work) pipes exposed on wall including filling the joints with approved adhesive complete as per specifications, approved drawing, design and including entire carriage of material within all leads lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 118 | 111.1 | 1216 (16mm (Sixteen millimetre) Outer diameters pipe | 129.3 | Per running metre | |
| 119 | 111.2 | 1620 (20mm (Twenty millimetre) Outer diameters pipe | 125.2 | Per running metre | |
| 120 | 112 | Providing and fixing Polythyelene – Aluminium -Polyethylene (PE-AL-PE) composite pressure pipe of Kitec U.V. stabilized with carbon black Conforming to IS-15450-2004 composite fittings for watre supply including filling the joints with approved adhesive complete as per specifications, approved drawing, design and including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 121 | 112.1 | Providing and fixing 1216mm (One thousand two hundred sixteen millimetre) Equal Tee | 96 | Each | |
| 122 | 112.2 | Providing and fixing Female elbow 1216 x 15mm (One thousand two hundred sixteen into fifteen millimetre) thread | 78 | Each | |
| 123 | 112.3 | Providing and fixing equal Tee 1620mm (One thousand six hundred twenty millimetre) | 86 | Each | |
| 124 | 112.4 | Providing and fixing Female elbow 1620 x 20 mm (One thousand six hundred twenty into twenty millimetre) thread. | 124 | Each | |
| 125 | 112.5 | Providing and fixing Male thread connector 1216 x 15mm (One thousand two hundred sixteen into fifteen millimetre) | 82 | Each | |
| 126 | 112.6 | Providing and fixing Female thread connector 1216 x 15mm (One thousand two hundred sixteen into fifteen millimetre) | 41 | Each | |
| 127 | 112.7 | Providing and fixing Female thread connector 1620 x 20 mm (One thousand six hundred twenty into twenty millimetre) | 44 | Each | |
| 128 | 112.8 | Providing and fixing male thread connector1620 x 20 mm (One thousand six hundred twenty into twenty millimetre) | 44 | Each | |
| 129 | 113 | Providing 200mm (Two hundred) wide cast iron RUNGES with chequered of ribbed non slip surface including fixing in manhole/septic tank with 200x200x100mm (Two hundred into two hundred into one hundred milimetre) cement concrete 1:3:6 (One cement : Three sand : Six graded) stone aggregate 20mm (Twenty milimetre size) block including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 20 | Each | |
| 130 | 114 | Providing and fixing cast iron cover without frame for manholes frame of 500mm (Five hundred millimetre) internal diameter C.I. (Cast Iron) cover (medium duty). The weight of cover to be not less than 58 kgs (Fifty kilograms) including necessary fitting complete and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 2 | Each | |
| 131 | 115 | Providing and fixing C.P. Grab bar of Jaguar/Jal/ESS of approved brand including necessary fittings as per position of wash basin and water closet (seat) complete within all heights leads, lifts of material and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1 | Each | |
| 132 | 116 | Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40nmm (Twenty millimetre to Forty millimetre)nominal bore by providing and fixing tees including cutting and threading the pipe complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1 | Each. | |
| 133 | 117 | Providing and fixing in trenches P.V.C. Supreme pipe class \"B\" soil, waste and ventilating pipes conforming to IS No- 13592-92 fixing with adhesive mixure complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 134 | 117.1 | 110mm (One hundred one millimetre) nominal bore/diametres (2.7 mm (Two point seven millimetre) thick pipe | 187.4 | Per running metre | |
| 135 | 117.2 | 75mm (Seventy five millimetre) nominal bore/diametres (2.2mm (Two point two millimetre) thick pipe | 145.6 | Per running metre | |
| 136 | 118 | Providing and fixing M.S. holder bat clamps of approved design to PVC pipe embedded in and including cement concrete blocks 10x10x10cm (Ten into Ten into Ten centimetres) of 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size and cost of cutting holes and making good the walls complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 137 | 118.1 | 110mm (One hundred one milimetre) nominal bore/diametres | 37 | Each | |
| 138 | 118.2 | 75mm (Seventy five milimetre) nominal bore/diametres | 37 | Each | |
| 139 | 119 | Providing and fixing P.V.C. plain bend of Supreme/finolex Prince accessories for sewerage pipe conforming to IS No. 14735-99 including fixing with approved adhesive complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 140 | 119.1 | 110mm (One hundred ten millimetre) nominal bore/diametres | 44 | Each | |
| 141 | 119.2 | 75mm (Seventy five millimetre) nominal bore/diametres | 36 | Each | |
| 142 | 120 | Providing and fixing P.V.C. tee medium class of Supreme conforming to IS No-14735-99 including fixing with approved adhesive complete, including entire carriage of material within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 143 | 120.1 | 110mm (One hundred one milimetre) diametres | 12 | Each | |
| 144 | 120.2 | 75mm (Seventy five milimetre) diametres | 24 | Each | |
| 145 | 121 | Providing and fixing P.V.C. Heal Rest of Supreme Conforming to IS No-14735-99 including filling the joints with approved adhesive complete including entire carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 146 | 121.1 | 110mm (One hundred one milimetre) diametres | 4 | Each | |
| 147 | 121.2 | 75mm (Seventy five milimetre) diametres | 4 | Each | |
| 148 | 122 | Providing and fixing Anglo Indian No-20041 of Hindware /Cera of approved shade vitreous china wash down water closet (European type W.C. pan) with internal P or S trap including jointing the trap with soil pipe in with approved adhesive (seat and cover to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 12 | Each | |
| 149 | 123 | Providing and fixing 10.00 Ltrs (Ten litres) capacity PVC low level dual flushing cistern (Combi flush system) No. 2603 ISI marked of Cera/Jaguar/Hindware with a pair of C.I. or M.S. brackets with fittings such as lead valve less siphon, 15mm (Fifteen milimetre) nominal size brass ball valve with polythene float, C.P. brass handles, unions and couplings for connection with inlet, outlet and over flow pipe, 40mm (Forty milimetre) diametres C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately)including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 20 | Each | |
| 150 | 124 | Providing and fixing P.V.C. Collar of Supreme ISI marked conforming to IS No-14735-99 including fixing with approved adhesive complete, including entire carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 151 | 124.1 | 110mm (One hundred one milimetre) diametres | 27 | Each | |
| 152 | 124.2 | 75mm (Seventy five milimetre) diametres | 24 | Each | |
| 153 | 125 | Providing and fixing 110x90mm (One hundred ten into nineteen millimetre) nominal size/diameter P.V.C. floor trap of Supreme ISI marked Conforming to IS-14735-99 of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor etcetera complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 48 | Each | |
| 154 | 126 | Providing and fixing I.S. marked No. 20042 of Cera / Hindware in white colour vitreous china water closet squatting pan (Orrisa type W.C. pan) size 58x44cm (fifty eight into forty four centimetres) (earth work, bed concrete, foot rest and trap to be measured and paid for separately) of approved shade including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 8 | Each | |
| 155 | 127 | Providing and fixing 100mm (One hundred millimetre) nominal bore PVC P or S traps of Supreme for water closet (squatting pan) including jointing the trap with pan and soil pipe with approved adhesive including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 8 | Each | |
| 156 | 128 | Providing and fixing G.I. inlet connection for each flush pipe with W.C. pan including entire carriage of material within all leads lifts and other incidentals, and per as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 12 | Each | |
| 157 | 129 | Providing and fixing plastic seat (solid) type and cover for wash down water closet with C.P. brass hinges and rubber buffers complete within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-Charge.The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 12 | Each | |
| 158 | 130 | Providing and fixing 510x430x203mm (Five hundred ten into Four hundred thirty into Two hundred three milimetre) size having bowl depth 200mm (Two hundred millimetre) stainless steel Kitchen sink of Cera/Hindware/Jaquar/Diamond of approved standard ISI marked with drain board and C.P. waste and C.I or M.S bracket painted white including cutting holes in walls and making good the same including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 2 | Each | |
| 159 | 131 | Providing and fixing vitreous china urinal of snow white shade including connection with waste pipe by means of white lead mixed with chopped hemp small flat back No-60001 with auto cistern of Hindware/ Cera/Jaquar of star white/Snow white shade 39x37.5x59cm (Thirty nine into Thirty seven point five into Fifty Nine centimetre) including neccessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 12 | Each | |
| 160 | 132 | Providing and fixing vitreous china wash basin 102012 (CLAIR) of Cera / Hindware /Jaguar of Snow white/star white shade 58x43cm (Fifty eight into forty three centimetre) with single hole for pillar tap and C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 24 | Each | |
| 161 | 133 | Providing and fixing vitreous china pedestal No-11018 of Cera / Hindware of approved shade for wash basin complete with a hole at the back for the resption of pipe and fittings including entire carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 24 | Each. | |
| 162 | 134 | Providing and fixing 32mm (Thirty two millimetre) nominal size diametre rubber plug for wash basin including entire carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 26 | Each | |
| 163 | 135 | Providing and fixing 32mm (Thirty two millimetre) diametre M.I. union for wash basin and sink complete in all respect including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 26 | Each | |
| 164 | 136 | Providing and fixing 32mm (Thirty two millimetre) diametre PVC waste pipe for wash basin or sink with check nut complete, including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 26 | Each | |
| 165 | 137 | Providing and fixing 100mm (One hundred millimetre) diametresC.P. Grating of ISI marked of Jal/ESS/ Jaguar for gully floor or Nahni trap including entire carriage of material within all leads, lifts and other incidental as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 26 | Each. | |
| 166 | 138 | Providing and fixing flat back 600x450mm (Six hundred into Four hundred fifty millimetre) beveled edge mirror of ATUL/MODI GUARD of superior glass mounted on 6mm (Six millimetre) thick A.C. sheet or ply wood sheet and fixed to plugs with C.P. brass screws and washers including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 24 | Each | |
| 167 | 139 | Providing and fixing 600x20mm (Six hundred into Twenty millimetre) C.P. brass Towel rail ISI marked Jal/ESS/Jaguar complete with C.P. brass brackets fixed to plugs with C.P. brass screws etcetera including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 24 | Each | |
| 168 | 140 | Providing and fixing 600x120mm (Six hundred into One hundred twenty millimetre) glass shelf of Jal/ ESS/Jauar with C.P. brass ISI marked (Heavy duty) brackets and guard rail complete fixed to wooden plugs with C.P. brass fitting and neccessary screws including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 24 | Each | |
| 169 | 141 | Providing and fixing C.P. brass toilet paper holder of Jal/ESS/Jaguar (Heavy duty make ISI marked of approved brand including neccessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 12 | Each | |
| 170 | 142 | Providing and fixing chromium plated jet pressure of Jal/ESS/Jaguar with fittings complete including entire carriage of material within all leads lifts and other incidentals and as per specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 12 | Each | |
| 171 | 143 | Providing and fixing 15mm (Fifteen millimetre) nominal bore chromium plated PTMT push cock tap of ISI marked of Jal/ESS/Jaguar complete as per specifications including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 8 | Each | |
| 172 | 144 | Providing and fixing 15mm (Fifteen millimetre) nominal bore chromium plated fancy bib tap of ISI marked No. 8934 of Continental series of Jaguar / Contessa series of Hindware/Jal/ESS including neccessary fiiting complete as per specifications including entire carriage of material within all leads lifts and other incidentals, and per as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 24 | Each | |
| 173 | 145 | Providing and fixing 15mm (Fifteen millimetre) diametre C.P. brass stop cock IS marked No. 8934 of Continental series of Jaguar / Contessa series of Hindware Jal/ESS including neccessary fitting complete as per specifications including entire carriage of material within all leads lifts and other incidentals, and per as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 32 | Each | |
| 174 | 146 | Providing and fixing 15mm (Fifteen millimetre) diametre C.P. brass pillar tap with capstan head IS marked No. 8934 of Continental series of Jaguar / Contessa sereies of Hindware/Jal/ESS with neccessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 26 | Each | |
| 175 | 147 | Providing and fixing 15mm (Fifteen millimetre) diametre brass angle valve without nuts ISI marked IS No. 8934 of Continental series of Jaguar / Contessa series of Hindware/Jal/ESS with neccessary fitting complete as per specifications including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 40 | Each | |
| 176 | 148 | Providing and fixing C.P. brass full way valve with wheel ISI marked of Continental series of Jaguar/ Contessa series of Hindware/Jal/ESS with neccessary fitting complete as per specifications including entire carriage of material within all leads lifts and other incidentals, and per as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 177 | 148.1 | 15mm (Fifteen millimetre) nominal bore/ diametres | 8 | Each | |
| 178 | 148.2 | 20mm (Twenty millimetre) nominal bore/ diametres | 8 | Each | |
| 179 | 149 | Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass valve (Horizontal plunger type) of Jal/Jaguar/ESS high pressure with copper plate as per specifications including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 8 | Each | |
| 180 | 150 | Providing and fixing 15mm (Fifteen millimetre) nominal bore PVC connection pipe with brass union 45cm (Forty five Centimetre) length complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 60 | Each | |
| 181 | 151 | Providing and fixing 5.00 Ltrs (Five litres) net capacity cistern of Hindware/Cera/Jaguar of snow white shade with dual flushing system and a pair of PVC / C.I. or M.S. bracket complete with fittings including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same (over flow pipe to be measured and paid for separately) including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 12 | Each | |
| 182 | 152 | Providing and fixing P.V.C. SINTEX water storage tank (Tripple layers) having capacity of 1000 (One thousand) liters of ISI 12701 marked with G.I. (Galvanised iron) inlet and outlet connection, 15mm (Fifteen millimetre) nominal bore ball valve and mosquito proof P.V.C. cover with locking arrangment including hoisting upto all heights above ground level including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 8 | Each | |
| 183 | 153 | Providing and fixing to level or slopes PVC pipe of supreme/Finolex/Prince for sewerage line and jointing with approved adhesive of approved brand. including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 184 | 153.1 | 160mm (One hundred sixty millimetre) nominal bore/diameters. 8.0mm (Eight point zero millimetre) thick | 160 | Per running metre | |
| 185 | 153.2 | Providing and fixing 1:5:10 (One cement : five sand : Ten graded crushed/broken stone aggregate 40mm (Forty millimetre) nominal size bedding for PVC pipe 160mm (One hundred sixty millimetre) diametre with necessary form work and curing complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 160 | Per running metre | |
| 186 | 154 | Construction of manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetre nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm (Forty millimetre nominal size) inside plastering 15mm (Fifteen millimetre) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetre nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred millimetre) 500mm(Five hundred millimetre) deep, including C.I. (Cast Iron) cover with frame (medium duty single seal pattern -I) 450x610mm (Four hundred fifty into six hundred ten millimetre) internal dimension. Total weight of cover and frame should be 38 Kgs (Thirty eight kilogram) i.e. weight of cover 23 Kgs (Twenty three kilogram) and weight of frame 15 Kgs (Fifteen kilogram) with 300mm (Three hundred millimetre) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 8 | Each | |
| 187 | 155 | Construction of manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetre nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm(Forty millimetre nominal size) inside plastering 15mm ( Fifteen millimetre) thick with cement mortar 1:3 ( One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetre nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred millimetre) 1.00 mtrs(One metre) deep, including C.I. (Cast Iron) cover with frame (Medium duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred ten millimetre) internal dimension. Total weight of cover and frame should be 38 Kgs (Thirty eight kilogram) i.e. weight of cover 23 Kgs (twenty three kilogram) and weight of frame 15 Kgs (Fifteen kilogram) with 300mm (Three hundred millimetre) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 7 | Each | |
| 188 | 156 | Providing and fixing manhole cover of cast iron with frame of internal dimension 455x610mm (Four hundred fifty five into six hundred ten millimetre) rectangular. The weight of cover with frame should be 38 Kgs (Thirty eighty kilogram) weight of cover should be 23 kgs (Twenty Three Kilogram) and weight of frame 15 kgs (Fifteen Kilograms) complete within all leads, lifts and other incidentals, as per specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 6 | Each | |
| 189 | 157 | Providing and fixing 20mm (Twenty millimetre) nominal diametre peet valve with wheel ISI marked IS No. 8934) of Jal/ESS ESS / Jaguar as per specifications including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 2 | Each |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
