Construction Of Senior Officers Mess And Rest Room At Irb Camp Pandikkad , Malappuram Building, Pandikkad,Malappuram-Kerala

TDR : 26386055

Tender Notice
BOQ

Expired

Pandikkad,Malappuram , Kerala

Tender Brief : Construction Of Senior Officers Mess And Rest Room At Irb Camp Pandikkad , Malappuram Building

Document Fees
₹ 2800 /-

EMD
₹ 50000.0 /-

Tender Value
Refer document

Submission Date
04-01-2021

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Work Name : Construction of Senior Officers Mess & Rest room at IRB Camp Pandikkad, Malappuram
1	1	CIVIL WORKS - GROUND FLOOR	BI01010001010000000000000515BI0100001113
2	1.01	od170366/2020_2021 : JCB for cutting and levelling the site and felling small trees with its roots etc.complete.	BI01010001010000000000000515BI0100001114	10	hour
3	1.02	2.33.2 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 60 cm girth up to and including 120 cm girth	BI01010001010000000000000515BI0100001115	3	each
4	1.03	2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil	BI01010001010000000000000515BI0100001116	44.83	cum
5	1.04	4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)	BI01010001010000000000000515BI0100001117	14.741	cum
6	1.05	60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site	BI01010001010000000000000515BI0100001118	52.022	cum
7	1.06	7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)	BI01010001010000000000000515BI0100001119	47.726	cum
8	1.07	50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete	BI01010001010000000000000515BI0100001120	18.068	cum
9	1.08	50.6.7.2 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.	BI01010001010000000000000515BI0100001121	51.901	cum
10	1.09	6.3.2 : Brick work with common burnt clay machine moulded perforated bricks of classdesignation 12.5 conforming to IS: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand):With Modular bricks	BI01010001010000000000000515BI0100001122	0.673	cum
11	1.1	5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size	BI01010001010000000000000515BI0100001123	4.338	cum
12	1.11	5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).	BI01010001010000000000000515BI0100001124	28.387	cum
13	1.12	5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers	BI01010001010000000000000515BI0100001125	100.45	sqm
14	1.13	5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform	BI01010001010000000000000515BI0100001126	244.241	sqm
15	1.14	5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide	BI01010001010000000000000515BI0100001127	68.6	metre
16	1.15	5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more	BI01010001010000000000000515BI0100001128	3105	kilogram
17	1.16	13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	BI01010001010000000000000515BI0100001129	828.712	sqm
18	1.17	13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)	BI01010001010000000000000515BI0100001130	222.461	sqm
19	1.18	13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)	BI01010001010000000000000515BI0100001131	211.66	sqm
20	1.19	11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.	BI01010001010000000000000515BI0100001132	147.267	sqm
21	1.2	od170361/2020_2021 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.(Antiskid)	BI01010001010000000000000515BI0100001133	13.001	sqm
22	1.21	11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.	BI01010001010000000000000515BI0100001134	52.2	sqm
23	1.22	21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)	BI01010001010000000000000515BI0100001135	57.28	kg
24	1.23	21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)	BI01010001010000000000000515BI0100001136	53.088	kg
25	1.24	21.2.2 : Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides	BI01010001010000000000000515BI0100001137	14.4	sqm
26	1.25	21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness	BI01010001010000000000000515BI0100001138	1.8	sqm
27	1.26	9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc	BI01010001010000000000000515BI0100001139	329.5	kg
28	1.27	9.117.1 : Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-chargeExtruded section profile size 48x40 mm	BI01010001010000000000000515BI0100001140	25	metre
29	1.28	9.118.1 : Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter).	BI01010001010000000000000515BI0100001141	8	sqm
30	1.29	9.147C.2 : Providing and fixing factory made uPVC white colour casement/ Casement cum\nfixed glazed door comprising of uPVC multi-chambered frame, sash and mullion\n(where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick\ngalvanized mild steel section made from roll forming process of required length\n(shape & size according to uPVC profile), uPVC extruded glazing beads of\nappropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges\nand one handle on each side of panels along with zinc plated mild steel multi\npoint locking having transmission gear, cylinder with keeps and one side key,\nG.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary\nstainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion\nwelded at all corners, mullion (if required) shall be also fusion welded including\ndrilling of holes for fixing hardware's and drainage of water etc. After fixing\nframe the gap between frame and adjacent finished wall shall be filled with\nweather proof silicon sealent over backer rod of required size and of approved\nquality, all complete as per approved drawing & direction of Engineer-in-Charge.\n(Single / double glass panes and silicon sealent shall be paid separately).<br>\nNote: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance\nin dimension i.e. in depth & width of profile shall be acceptable.Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion67 x 80 mm all having wall thickness of 2.3 +/- 0.2 mm and single glazing bead /double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm)	BI01010001010000000000000515BI0100001142	23.101	sqm
31	1.3	9.147D.3 : Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately)\nNote: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Two track two panels sliding window made of (big series) frame 67 x 50 mm &sash 46 x 62 mm both having wall thickness of 2.3 +/- 0.2 mm and single glazingbead / double glazing bead of appropriate dimension . (Area of window above1.75 sqm upto 2.50 sqm).	BI01010001010000000000000515BI0100001143	20.25	sqm
32	1.31	13.48.1 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm	BI01010001010000000000000515BI0100001144	1072.95	sqm
33	1.32	50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge	BI01010001010000000000000515BI0100001145	67.045	cum
34	1.33	16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.	BI01010001010000000000000515BI0100001146	160.9	sqm
35	1.34	18.32.1 : Constructing masonry chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 \n(1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S (non modular) bricks of class designation 7.5	BI01010001010000000000000515BI0100001147	2	each
36	2	WATER SUPPLY	BI01010001010000000000000515BI0100001148
37	2.01	17.3.1 : Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid	BI01010001010000000000000515BI0100001149	5	each
38	2.02	17.7.3 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps	BI01010001010000000000000515BI0100001150	8	each
39	2.03	17.9.1 : Providing and fixing kitchen sink with C. I brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required:White glazed fire clay kitchen sink of size 600x450x250 mm	BI01010001010000000000000515BI0100001151	1	each
40	2.04	od170359/2020_2021 : Providing and fixing 110mm PVC Multi floor trap	BI01010001010000000000000515BI0100001152	6	each
41	2.05	50.18.8.3.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2	BI01010001010000000000000515BI0100001153	20	metre
42	2.06	50.18.9.13.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall	BI01010001010000000000000515BI0100001154	7	metre
43	2.07	50.18.7.6.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall	BI01010001010000000000000515BI0100001155	15	metre
44	2.08	50.18.9.5.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge 40 mm dia 10Kgf/cm2	BI01010001010000000000000515BI0100001156	40	metre
45	2.09	50.18.9.15.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 10Kgf/cm2- External work- Exposed on wall	BI01010001010000000000000515BI0100001157	10	metre
46	2.1	50.18.9.19.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall	BI01010001010000000000000515BI0100001158	20	metre
47	2.11	50.18.9.8.2 : Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching and refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 4 Kgf/cm2	BI01010001010000000000000515BI0100001159	25	metre
48	2.12	50.18.9.9.2 : Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2	BI01010001010000000000000515BI0100001160	35	metre
49	2.13	50.18.9.22.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow	BI01010001010000000000000515BI0100001161	1	no
50	2.14	50.18.9.22.3 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow	BI01010001010000000000000515BI0100001162	1	no
51	2.15	50.18.9.22.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend	BI01010001010000000000000515BI0100001163	10	no
52	2.16	50.18.9.22.5 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee	BI01010001010000000000000515BI0100001164	2	no
53	2.17	50.18.9.22.6 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee	BI01010001010000000000000515BI0100001165	5	no
54	2.18	50.18.9.22.8 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl	BI01010001010000000000000515BI0100001166	1	no
55	2.19	od170360/2020_2021 : Supplying and fixing 110mm PVC gratings of approved quality etc.complete.	BI01010001010000000000000515BI0100001167	6	each
56	2.2	18.63 : Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms	BI01010001010000000000000515BI0100001168	14	each
57	2.21	18.17.3 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore	BI01010001010000000000000515BI0100001169	2	each
58	2.22	18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore	BI01010001010000000000000515BI0100001170	6	each
59	2.23	18.65 : Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fittings arrangements, weighing not less than 106 gms.	BI01010001010000000000000515BI0100001171	6	each
60	2.24	17.32.2 : Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm	BI01010001010000000000000515BI0100001172	6	each
61	2.25	od171863/2020_2021 : Supplying and fixing 15mm CP shower with shower rose with 15mm PTMT concealed stop cock etc. complete	BI01010001010000000000000515BI0100001173	5	each
62	2.26	50.17.1.4 : Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.	BI01010001010000000000000515BI0100001174	5	no
63	2.27	17.73.2 : Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighting not less than 190 gms	BI01010001010000000000000515BI0100001175	6	no
64	2.28	18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.	BI01010001010000000000000515BI0100001176	1000	Litre
65	3	SEPTIC TANK	BI01010001010000000000000515BI0100001177
66	3.01	2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil	BI01010001010000000000000515BI0100001178	82.5	cum
67	3.02	60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site	BI01010001010000000000000515BI0100001179	26.4	cum
68	3.03	7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)	BI01010001010000000000000515BI0100001180	4.401	cum
69	3.04	4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)	BI01010001010000000000000515BI0100001181	1.601	cum
70	3.05	5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size	BI01010001010000000000000515BI0100001182	12.762	cum
71	3.06	5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete	BI01010001010000000000000515BI0100001183	4.2	sqm
72	3.07	5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.	BI01010001010000000000000515BI0100001184	64	sqm
73	3.08	5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform	BI01010001010000000000000515BI0100001185	33	sqm
74	3.09	5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide	BI01010001010000000000000515BI0100001186	40	metre
75	3.1	5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more	BI01010001010000000000000515BI0100001187	1020.96	kilogram
76	4	Electrical	BI01010001010000000000000515BI0100001188
77	4.01	1.10.1 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC\ninsulated copper conductor single core cable in surface / recessed medium class PVC conduit,\nwith modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS\nPVC insulated copper conductor single core cable etc as required.Group A	BI01010001010000000000000515BI0100001189	29	point
78	4.02	1.10.2 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC\ninsulated copper conductor single core cable in surface / recessed medium class PVC conduit,\nwith modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS\nPVC insulated copper conductor single core cable etc as required.Group B	BI01010001010000000000000515BI0100001190	15	point
79	4.03	1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC\ninsulated copper conductor single core cable in surface / recessed medium class PVC conduit,\nwith modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS\nPVC insulated copper conductor single core cable etc as required.Group C	BI01010001010000000000000515BI0100001191	8	point
80	4.04	1.4 : Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single corecable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etcas required.	BI01010001010000000000000515BI0100001192	10	point
81	4.05	1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm	BI01010001010000000000000515BI0100001193	80	metre
82	4.06	1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm	BI01010001010000000000000515BI0100001194	300	metre
83	4.07	1.17.21 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm	BI01010001010000000000000515BI0100001195	75	metre
84	4.08	1.17.29 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 6 sq. mm	BI01010001010000000000000515BI0100001196	30	metre
85	4.09	1.17.31 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm	BI01010001010000000000000515BI0100001197	30	metre
86	4.1	1.19 : Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/ PVC conduit as required.	BI01010001010000000000000515BI0100001198	20	metre
87	4.11	1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm	BI01010001010000000000000515BI0100001199	120	metre
88	4.12	1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm	BI01010001010000000000000515BI0100001200	300	metre
89	4.13	1.24.7 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet	BI01010001010000000000000515BI0100001201	1	each
90	4.14	1.24.8 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Bell push	BI01010001010000000000000515BI0100001202	5	each
91	4.15	1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.	BI01010001010000000000000515BI0100001203	9	each
92	4.16	1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch, connection etc. as required. (For light plugs to be used in non residentialbuildings).	BI01010001010000000000000515BI0100001204	10	each
93	4.17	1.32 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.	BI01010001010000000000000515BI0100001205	8	each
94	4.18	1.38 : Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.	BI01010001010000000000000515BI0100001206	5	each
95	4.19	1.56 : Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings).	BI01010001010000000000000515BI0100001207	5	each
96	4.2	1.58 : Supplying and fixing PVC batten/ angle holder including connection etc. as required.	BI01010001010000000000000515BI0100001208	13	each
97	4.21	2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole	BI01010001010000000000000515BI0100001209	20	each
98	4.22	2.13.2 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps	BI01010001010000000000000515BI0100001210	1	each
99	4.23	2.15.3 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual \n current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps	BI01010001010000000000000515BI0100001211	1	each
100	4.24	90.11.1.12 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required	BI01010001010000000000000515BI0100001212	1	each
101	4.25	od174392/2020_2021 : Supply and fixing 9 W LED Bulb make philips/Govt approved reputed brand .	BI01010001010000000000000515BI0100001213	13	each
102	4.26	od174399/2020_2021 : Supply and fixing 12 W LED Bulb make philips/Govt approved reputed brand	BI01010001010000000000000515BI0100001214	6	each
103	4.27	od174393/2020_2021 : Supply and fixing cast aluminium stove enameled bulk head fitting with deep drawn anodised aluminium body, epoxy powder coated, heat resistant prismatic glass cover suitable for LED bulb to wall / ceiling including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS or extending the original wiring and making good the surface as required.	BI01010001010000000000000515BI0100001215	6	each
104	4.28	od174394/2020_2021 : Supply, conveyance, installation, testing and commissioning of the following sizes of exhaust fans(150mm)of brand USHA/CROMPTON/ORIENT/HAVELLS in the existing opening including equivalent PVC pipe for opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3core round copper conductor flex wire conforming to relevant ISS.	BI01010001010000000000000515BI0100001216	6	each
105	4.29	od174395/2020_2021 : Supply,installation,testing and commissioning of 20W LED Tube Light fittings of CROMPTON/PHILIPS/GM make or equivalent, giving connection with 3 core PVC insulated and sheathed round Cu flex on wall/ceiling conforming to relevant ISS etc.complete as required	BI01010001010000000000000515BI0100001217	12	each
106	4.3	od174396/2020_2021 : supply installation and commissioning of Mirror LED light 9W of make havells/bajaj/crompton/philips/luker	BI01010001010000000000000515BI0100001218	5	each
107	4.31	od174397/2020_2021 : Supply, conveyance, installation, testing and commissioning of the following sizes of exhaust fans in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections conforming to relevant ISS. 225 mm metal frame	BI01010001010000000000000515BI0100001219	1	no
108	4.32	od174398/2020_2021 : Supplying and fixing 2 nos of 2 M GI/PVC box with modular plate and cover in front on surface or in recess, including providing and fixing 25 A modular shuttered socket & 25 A modular DP switch with indicator, connection etc. as required.	BI01010001010000000000000515BI0100001220	5	each
109	4.33	90.4.1 : Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.	BI01010001010000000000000515BI0100001221	9	each
110	4.34	90.4.5.2 : Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.	BI01010001010000000000000515BI0100001222	8	each
111	4.35	od174401/2020_2021 : Supply installation testing and commissioning of water geyser 3Ltr (make Racold model pronto neo DN power 3000W) vertical mounting, 3 star Duronox technology used 6.5bar rated pressure, temperature 25 to 75 degreeC, 3.5Kg 20.90cm height 33.50cm width and 20cm depth italian design, tank stainless steel material body ABS plastic material giving connections as required completely	BI01010001010000000000000515BI0100001223	2	each
112	4.36	od174402/2020_2021 : Supply,Installation testing and commissioning of 1TON 3star rated inverter Air conditioner of brand LG/VOLTAS/BLUESTAR With voltage Stabilizer including connection etc as required	BI01010001010000000000000515BI0100001224	2	each
113	4.37	od174403/2020_2021 : Supply and providing plate earthing as per IS 3043 with 1200 x 1200 x 6 mm GI/CI Earth plate, 50mm GI watering pipe fixed to the earth plate ith 25 x3 MM GI clamps,GI Funnel with weld mesh,fillling required quantity of charcoal including construction of inspection chamber with a bed concrete of 1:4:8 PCC Using 40mm broken stone(10cm thick),brick work in cement mortar 1:4 ,12mm thick,(finished inside dimension shall be 450 x450 x450 mm)but excluding test joint,earth continuity conductor to the plate, and covering the top(in ordinary rocky-soft laterite soil)	BI01010001010000000000000515BI0100001225	2	each
114	4.38	od174404/2020_2021 : Supply and drawing bare copper conductors of the following sizes along with wiring/cables and giving connections etc as required.<br>8 SWG	BI01010001010000000000000515BI0100001226	30	metre
115	4.39	od174406/2020_2021 : Supply installation testing and commissioning of 45W LED Top light with complete set (group-A) Govt approved and reputed brands on 25 mm or nearest suitable size B class GI pipe 1.5 M long cut and weld,bend to shape fixed on wall using flat iron clamps fabricated frpm 25x3 mm MS flat giving connection with required length of 24/.20mm PVC insulated and PVC sheathed 650 /1100V grade round 3 core copper conductor conforming to relavant ISS painting the GI pipe and clamps with all necessary items making good the surface as required.<br>	BI01010001010000000000000515BI0100001227	1	each
116	4.4	od174407/2020_2021 : Fabrication ,supply ,installing and providing dust and vermin proof wall mounting cubicle type three phase meter board of suitable size fabricated from 1.60 mm /16 SWG CRCA sheet, providing necessary support made from same gauge to fix KSEB meter /fuse unit/neutral link /CTs given below ,hinged door construction for the front side provided with vision panel and providing knock outs for wire /cable entry and exit required quantity of rubber beeding painting the entire board with 2 coats of synthetic enamel paint over a coat of zinc chromate primer ,fixing it on the wall , making good the damages ,colour washing etc as required .CRCA sheet alone be used for the fabrication. 415 V 63 A Procelain fuse unit-3Nos, Neutral link-1 (MR)	BI01010001010000000000000515BI0100001228	1	no

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Kerala Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Senior Officers Mess And Rest Room At Irb Camp Pandikkad , Malappuram Building, Pandikkad,Malappuram-Kerala

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Senior Officers Mess And Rest Room At Irb Camp Pandikkad , Malappuram Building, Pandikkad,Malappuram-Kerala

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us