Cantonment Board-CB has published Term Contract For Supply And Fixing Of Children Playing Equipments And Recreational Facilities For Delhi Cantonment Board , Delhi Cantt . . Submission Date for this Tender is 12-01-2021. Sport Accessories Tenders in Delhi Cantt Delhi. Bidders can get complete Tender details and download the document.
| Name of Work: Term Contract for supply & fixing of Children Playing Equipments & Recreational Facilities for Delhi Cantonment Board, Delhi Cantt. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Qty. | Units | |
| 1 | 1 | Circular Swing\nTHE AREA : 1.5 m x 2.0 m \nSAFE PLAY AREA : 2.5 m x 3.0 m \nHEIGHT : 1.5 m \nAGE : 5 - 10 yrs. \nThe leg support of this item shall be made up of 40 mm NB GI pipe, while the top bar shall be from 50 mm NB GI pipe. The swing frame shall be made from 25 mm NB GI GI pipe and 15 mm NB GI pipe. There shall be two seats provided which shall be made out of molded plastic in roto molding process. The platform shall be made using aluminiumchequered plate for footrest and bearing assembly shall be made. The GI pipes shall be powder coated to avoid rusting. \nS.S. (Non Rusting) Nut Bolt 10 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. \nPowder Coating 60 Micron with PP Powder. \n | item1 | 16 | no |
| 2 | 2 | F.R.P Spiral slide (3.0 M)\nAge Group: 4-12Yrs\nArea: 4.4 x 1.8 M \nSafe Play Area; 5.4 x 2.8 M \nPlatform Height: 2.1\nTHE AREA : 3.7 m x 1.8 m \nSAFE PLAY AREA : 4.5 m x 2.5 m \nHEIGHT : 2.1 m \nREC. AGE : 4 - 12 yrs. \nThe spiral slide chute is made up of 6mm thick Fiber reinforced plastic 6 to 8 mm thickness /LLDPE (Low linear Density Poly Ethylene). Slide is supported on 80 mm center support GI pipe. \nThe platform shall be made up of Fiber reinforced plastic (FRP) 6 to 8 mm thickness with anti skid surface. Platform on each side should be equal in length 1.0m x 1.0m. The platform is supported by 4 Nos. Vertical 80 mm powder coated GI pipes. Railing is provided to the platform and is made from low-density polyethylene, supported by 20 mm GI pipe with nylon Clamp. Ladder is made up of 25 mm GI pipe having railing of 20 mm. There are triangular steps 16 SWG GI sheet. \nS.S. (Non Rusting) Nut Bolt 10 mm/ 8 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. \nPowder Coating 60 Micron with PP Powder. \n | item2 | 4 | no |
| 3 | 3 | Wide Slide (S.S)\nWide Slide (G.I)\nThis item consists of ISI marked structure. This is one of the attractive slides of its kind. The chute is made of 14 SWG SS sheet. The stainless steel used is of 304 grades. \nThe chute is supported by 40 x 5 MS angles. This chute is attached to the platform made from GI sheet. \nThe platform is supported by 40 mm GI pipe. The ladder is made using 20 mm and 25 mm GI pipes. \nThe landing support used is made up of 25 mm pipe. The handrail of the chute is made up of 20mm powder coated GI pipe. The slide is innovative wide slide on which at a time 3 kids can slide. Slide Platform 40x5 mm angel frame with fiber sheet. platform support 40 mm GI pipe. \nS.S. (Non Rusting) Nut Bolt 10 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. \nPowder Coating 60 Micron with PP Powder. \n | item3 | 24 | no |
| 4 | 4 | PLATFORM MGR METAL TOP\nGround Space: 1.5 MtrDia\nSafe Play Area: 3.5 MtrDia\nStructure :The platform of this merry-go-round consists of Non-Skid type aluminum chequered plate of 16 SWG. The ring on which the chequered plate is placed is made of 32 NB B Class GI pipes. The support below the chequered plate is of 40 x 40 x 5 and 25 x 25 x 5 MS angle. The platform frame is made in 25 x 5 and 40 x 5 ms Angle. It is provided with handrails of 20 NB GI pipes. The foundation frame is fabricated with 40 x 40 x 5 MS Angle.\nBearing & Shaft: Centre Support 70 mm bright Rod. Main housing Seamless Pipe. Main Bearing Thrust 51312 Bearing & Centre Guide Bearing 6310. The Bearing used in this item is of dual heavy-duty bearing lubricated with water sealant 51312 & 6310.\nPowder Coating: The Equipment shall first be coated with using Akzonobel /Berger /Prime make or its equivalent primer powder coating of at least 30-40 microns followed by Polyester Powder Coating of at least 30-50 microns thickness using Akzonobel /Berger /Prime make or equivalent. Powder coating colour is TGTC & Lead free & passes the 1000-hour salt spray test & MEK solvent resistance rub test – ASTM D5402.\n | item4 | 20 | no |
| 5 | 5 | Cross - N – Zero \nTHE AREA : 1 m x 0.3 m \nSAFE PLAY AREA : 2 m x 1.3 m \nREC. AGE : 4 yrs Onwards. \nThis item provides brain-refreshing experience to the children and enhances their tactical strength by providing them an intelligent game. The prisms for the ‘X’ and ‘O’ of this item are made of blow moulded plastic while the frame is made up of low-density polyethylene in blow moulding. The prisms are fixed on a powder coated GI frame of 25 mm and 15 mm GI pipes. \nNylon Clamp made with 66 nylon Material. \nPowder Coating 60 Micron with PP Powder. \n | item5 | 8 | no |
| 6 | 6 | Vertical Net Climber 1.5 m. Ht. (MAPS) \nThe climber providing exercise, shall be made up of 18 mm diameter Nylon rope attached by specially designed Nylon Ball clamps. These ropes shall be provided with pipe frame fabricated from 25 mm NB GI pipe with 12 mm dia M.S hooks. 50 x 10 MS flat welded with hook for clamping net purpose. The frame shall be grouted to the ground using standard angle of 25 x 25 x 5 mm thick. \nS.S. (Non Rusting) Nut Bolt 6 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. \nPowder Coating 60 Micron with PP Powder. \n | item6 | 16 | no |
| 7 | 7 | Rock N Roll \nREC. AGE :- 5 – 12 YRS. \nTHE AREA :- 1.8 M X 1 M \nSAFE PLAY AREA :- 2.8 M X 2 M \nIn this Rock n Roll the barrel shall be made in fiberglass plastic with aanti skid and also giving it a phantom effect. The main frame shall be made up of 25 NB GI pipe. The stand for the barrel shall be made up of 40 NB GI pipe. The roller bush shall be attached to the barrel with bearing shaft of thk 35mm dia. The Rock n Roll shall be specially designed with full care and attention so that the child does not slip while walking in it. \nS.S. (Non Rusting) Nut Bolt 6 mm/10mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. \nPowder Coating 60 Micron with PP Powder \n | item7 | 16 | no |
| 8 | 8 | Triple Wave Slide Ht 1.5 Mtr\nGround Space: 5.6 Mtr x 2.5 Mtr\nSafe Play Area: 7.8 Mtr x 3.7 Mtr\nStructure, ladder & Platform:The platform structure pipes are of 80 NB B Class GI pipe. Ladder frame duly bend is of 25 NB B Class GI pipe. Platform is made of FRP 6-8mm thick with Anti-Skid design for firm foot grip. Triangular Steps are of 16 SWG GI sheet. Roto slide centre support is made of 80 NB B class GI pipe. Roto railing support made from 20 NG B class GI pipe. \nSlide Chute- The Slide Chute is made from 6-7 mm thick Fiber Reinforced Plastic (FRP) material. \nClamps, Roto railing, Caps & Nut Bolts: Clamps for railing are made of Nylon 6 material. Railing is made from LLDPE material used is FOOD GRADE and meets the requirement for standard IS:10146 added with UV stabilizer and antioxidants to protect it from UV rays and oxidization, respectively. All Nut Bolts are Stainless Steel material. Closing Caps are made up of LLDPE / HDPE /M.S. Nylon cap to protect from rain and dust. \nPowder Coating: The Equipment shall first be coated with using Akzonobel /Berger /Prime make or its equivalent primer powder coating of at least 30-40 microns followed by Polyester Powder Coating of at least 30-50 microns thickness using Akzonobel /Berger /Prime make or equivalent. Powder coating colour is TGTC & Lead free & passes the 1000-hour salt spray test & MEK solvent resistance rub test – ASTM D5402.\n | item8 | 12 | no |
| 9 | 9 | Four Seat Arch Swing (MAPS) \nGround Space: 6.08 Mtr x 1.08 Mtr\nSafe Play Area: 7.2 Mtr x 5.0 Mtr\nStructure:The main pipe is of 80 NB B Class GI pipe & Top bar is of 50 NB B Class GI Pipe. \nClamps, Chain & Rubber Belt: The swing is fixed on 6mm thick GI chain. The swing is made of 10mm thick Anti-Skid chequered reinforced rubber or moulded seat which is suspended with Plastosol coated short link chain with 6 Dia GI chain. Seat is made of rubber with Non-Skid surface with Nylon lining pattern.\nPowder Coating: The Equipment shall first be coated with using Akzonobel /Berger /Prime make or its equivalent primer powder coating of at least 30-40 microns followed by Polyester Powder Coating of at least 30-50 microns thickness using Akzonobel /Berger /Prime make or equivalent. Powder coating colour is TGTC & Lead free & passes the 1000-hour salt spray test & MEK solvent resistance rub test – ASTM D5402.\n | item9 | 8 | no |
| 10 | 10 | Deluxe Luxury Swing (Special) \nTHE AREA :- 1.8 M X 1.8 M \nSAFE PLAY AREA :- 2.8 M X 2.8 M \nThe Deluxe swing shall easily accommodate 03 adults at a time. Its top pipe shall be made \nusing 50 mm NB G.I. Pipe, while the leg supports shall be of 40 mm NB powder coated G.I. Pipe. Decorative frame shall be given inside of two leg pipes. Leg pipe and top bar shall be attached with junction box which shall be made of 4 mm MS plate with GI plating. It shall be provided with 2 mm thickness of FRP (Fiber Reinforced Plastic) / LLDPE (Low linear Density Poly Ethylene) roof. The the roof frame shall be fabricated out of 15 mm NB GI pipe seating arrangement shall be made in FRP strip / or 2 pieces of ( backrest & seating portion ) module in FRP 2 to 3 mm thick on 6 mm rubber coated GI chain. The ball bearings shall be mounted inside a specially designed nylon clamp. \nS.S. (Non Rusting) Nut Bolt 10mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. \nPowder Coating 60 Micron with PP Powder. \n | item10 | 8 | no |
| 11 | 11 | IGLOO ( Playing Station )\nSpecification :- The arch shaped side frame of igloo are made up of 100NB GI pipe & horizontal circle is \nProduct Area :- 12ft x 12ft \nSafe Play Area :- 16ft x 16ft \nmade up of 80 NB GI pipe. 16mm polyester rope galvanized steel wire inside. Height of the frame will be 1.8 Mtr. Swing is fitted with special design clamps assembly. Plastosol coated short link chain of 6 mm dia. Seat used is rubber with Non Skid surface with nylon lining pattern. Triangular hook are moulded in belt in such a way that it would not project from the top surface of the belt Seats. Rope end fastener is of high strength aluminium and fixed with T connector or Bar clamp made of nylon 6/ metal. Rope cross-over connector made with nylon 6/ metal. Rope end connector made from nylon 6/ metal. All GI Structure is Powder coated / PU Painted. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material\n | item11 | 4 | no |
| 12 | 12 | DOUBLE SEE – SAW\nGround Space: 2.4 Mtr x 1.5 Mtr\nSafe Play Area: 3.5 Mtr x 2.5 Mtr\nStructure :The lever support of the seesaw shall is made of 40 NB B Class GI Pipe and handle is made of 20 NB B Class GI Pipe. Stand made for 50 NB Pipe Angle Frame for foundation with lubricating bush system.\nCaps, Nut Bolts, Seat, Bearing & Pin: Seat of See-Saw is made of rotomoulding process with the wall thickness of 3/5mm. LLDPE material used is FOOD GRADE and meets the requirement for standard IS:10146 added with UV stabilizer and antioxidants to protect it from UV rays and oxidization, respectively. Bearing 6006ZZ used Housing 70 x 50 mm Seamless Pipe. Centre Pin is 32 mm of SAE8620 material. All Nut Bolts are Stainless Steel material. Closing Caps are made up of LLDPE / HDPE /M.S. Nylon cap to protect from rain and dust. \nPowder Coating: The Equipment shall first be coated with using Akzonobel /Berger /Prime make or its equivalent primer powder coating of at least 30-40 microns followed by Polyester Powder Coating of at least 30-50 microns thickness using Akzonobel /Berger /Prime make or equivalent. Powder coating colour is TGTC & Lead free & passes the 1000-hour salt spraytest & MEK solvent resistance rub test – ASTM D5402.\n | item12 | 16 | no |
| 13 | 13 | TRI BASKET\nGround Space: 1.9 Mtr x 1.6 Mtr\nSafe Play Area: 2.6 Mtr x 2.6 Mtr\nStructure: - It shall have a vertical pipe of 100 NB B Class G.I. pipe of required height. The attachments for basket and ducting shall be bolted to the vertical pipe with a 20 NB B Class G.I. pipe support.\nBucket: The bend bucket shall consist of basketball net and FRP (Fiber Reinforced Plastic) / LLDPE (Low linear Density Poly Ethylene) ducting. \nCaps & Nut Bolts: All Nut Bolts are Stainless Steel material. Closing Caps are made up of LLDPE / HDPE /M.S. Nylon cap to protect from rain and dust. \nPowder Coating: The Equipment shall first be coated with using Akzonobel /Berger /Prime make or its equivalent primer powder coating of at least 30-40 microns followed by Polyester Powder Coating of at least 30-50 microns thickness using Akzonobel /Berger /Prime make or equivalent. Powder coating colour is TGTC & Lead free & passes the 1000-hour salt spray test & MEK solvent resistance rub test – ASTM D5402.\n | item13 | 24 | no |
| 14 | 14 | MPPS\nSquare Deck – 1.0MTR 2 Nos\nSquare Roof 2 Nos\nFRP Step Ladder - 1.0 MTR 1 No.\nFRP Double Deluxe Plain Slide – 1.0 MTR. 2 Nos.\nDouble Toddler Swing 1 No.\nFRP Top Ramp - 3.0 MTR 1 No. \nArch Scrambler - 1.0 MTR 1 No.\nRock Scrambler – 1.0 MTR 1 No.\nRoto Railing 1 No\nPlease see the specification as mention at Annexure-A in the rates as per the specification give in the tender document (technical bid) and page No.26\n | item14 | 4 | no |
| 15 | 15 | MPPS\nSquare Deck - 1.5MTR 2 Nos\nSquare Roof 2 Nos\nFRP Step Ladder - 1.5 MTR 1 No.\nFRP Spiral Slide - 1.5 MTR 1 No.\nRock Scrambler - 1.5 MTR 1 No.\nSuspension Bridge - 2.9 MTR 1 No.\nRubber Net Climber - 1.5 MTR 1 No.\nFRP Deluxe Wave Slide - 1.5 MTR. 1 No.\nDouble See Saw 1 No.\nRoto Railing 1 No\nPlease see the specification as mention at Annexure-B in the rates as per the specification give in the tender document (technical bid) and page No.27 | item15 | 4 | no |
| 16 | 16 | MPPS\nHexagonal Deck - 1.5 MTR 1 No\nHexagonal Deck - 1.0 MTR 1 No\nHexagonal Roof 2 Nos\nRoller Slide - 1.5 MTR 1 No\nFRP Step Ladder - 1.5 MTR 1 No\nFRP Spiral Slide - 1.5 MTR 1 No\nFRP Wave Slide - 1.5 MTR. 1 No\nFRP Bridge – 2.4 MTR 1 No\nTic Tac Toe (Cross & Zero) 1 No\nFRP Deluxe Plain Slide - 1.0 MTR. 1 No\nSpiral Scrambler - 1.0 MTR 1 No\nRock Scrambler - 1.0 MTR 1 No\nSpider Scrambler - 1.0 MTR 1 No\nSplit Level Pipe Ladder 1 No\nPlease see the specification as mention at Annexure-C in the rates as per the specification give in the tender document (technical bid) and page No.28 & 29 | item16 | 4 | no |
| 17 | 17 | MPPS\nSquare Deck – 2.1MTR 1 No\nSquare Deck - 1.5MTR 1 No\nSquare Roof 2 Nos.\nFRP Deluxe Wave Slide – 2.1 MTR. 1 No\nDouble Swing - STD 80MM Pipe 1 No\nPipe Ladder - 2.1 MTR 1 No\nFRP Top Ramp - 2.4 MTR 1 No\nSplit Level Pipe Ladder 1 No\nFRP Deluxe Plain Slide - 1.5 MTR. 1 No\nSpider Scrambler - 1.5 MTR 1 No\nLoop Scrambler 1 No\nRoto Railing 2 Nos\nPlease see the specification as mention at Annexure-D in the rates as per the specification give in the tender document (technical bid) and page No.30 & 31)\n | item17 | 4 | no |
| 18 | 18 | Elephant Family ( Total 4 Nos , 2 Big and Small ) \nElephant Size: 8 feet Height and 10-11 feet length (trunk to tail) \nBaby Elephant: -Size: 4.5 feet Height & 6 feet length (Trunk to tail)\nG.P.( General Purpose) Resin with high quality fiberglass chopped matt with 3-4 layers of 450gsm\nIron armature to be use for strength the sculpture.\nMarble dust to be mix while casting with resin to add strength and longevity of sculpture. 4- P.U./deco paint and colour pigment to be use for long life and minimum maintenance.\nBenefits\nBy using above mentioned specifications we can increase the life and strength of sculptures.\nLong lasting colour will help in keeping minimum maintenance of sculpture.\nBy using above materials we can increase the look and feel of sculptures.\nP.U.colour coating will help to prevent sculptures from different weather conditions and provide long life to sculptures.\n | item18 | 4 | no |
| 19 | 19 | Monkey/ Baboon 3 Nos /Set\nSize: 2.5-3 feet Height (sitting Position)\nG.P.( General Purpose) Resin with high quality fiberglass chopped matt with 3-4 layers of 450gsm\nIron armature to be use for strength the sculpture.\nMarble dust to be mix while casting with resin to add strength and longevity of sculpture. 4- P.U./deco paint and colour pigment to be use for long life and minimum maintenance.\nBenefits\nBy using above mentioned specifications we can increase the life and strength of sculptures.\nLong lasting colour will help in keeping minimum maintenance of sculpture.\nBy using above materials we can increase the look and feel of sculptures.\nP.U.colour coating will help to prevent sculptures from different weather conditions and provide long life to sculptures.\n | item19 | 8 | no |
| 20 | 20 | Sitting Cow\nSize: 5.5-6 feet length (Mouth to tail) X 2.5 -3 feet height\nG.P.( General Purpose) Resin with high quality fiberglass chopped matt with 3-4 layers of 450gsm\nIron armature to be use for strength the sculpture.\nMarble dust to be mix while casting with resin to add strength and longevity of sculpture. 4- P.U./deco paint and colour pigment to be use for long life and minimum maintenance.\nBenefits\nBy using above mentioned specifications we can increase the life and strength of sculptures.\nLong lasting colour will help in keeping minimum maintenance of sculpture.\nBy using above materials we can increase the look and feel of sculptures.\nP.U.colour coating will help to prevent sculptures from different weather conditions and provide long life to sculptures.\n | item20 | 8 | no |
| 21 | 21 | Giraffe a set of two nos\nSize: 10 feet height & 6-6.5 feet length \nBaby Giraffe:\nSize: 6 feet height & 3.5- 4 feet length\nG.P.( General Purpose) Resin with high quality fiberglass chopped matt with 3-4 layers of 450gsm\nIron armature to be use for strength the sculpture.\nMarble dust to be mix while casting with resin to add strength and longevity of sculpture. 4- P.U./deco paint and colour pigment to be use for long life and minimum maintenance.\nBenefits\nBy using above mentioned specifications we can increase the life and strength of sculptures.\nLong lasting colour will help in keeping minimum maintenance of sculpture.\nBy using above materials we can increase the look and feel of sculptures.\nP.U.colour coating will help to prevent sculptures from different weather conditions and provide long life to sculptures.\n | item21 | 8 | no |
| 22 | 22 | Motu\nSize: 5 feet height\nG.P.( General Purpose) Resin with high quality fiberglass chopped matt with 3-4 layers of 450gsm\nIron armature to be use for strength the sculpture.\nMarble dust to be mix while casting with resin to add strength and longevity of sculpture. 4- P.U./deco paint and colour pigment to be use for long life and minimum maintenance.\nBenefits\nBy using above mentioned specifications we can increase the life and strength of sculptures.\nLong lasting colour will help in keeping minimum maintenance of sculpture.\nBy using above materials we can increase the look and feel of sculptures.\nP.U.colour coating will help to prevent sculptures from different weather conditions and provide long life to sculptures.\n | item22 | 16 | no |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
