Haridwar Development Authority has published Redevelopment Of L-Bund In Haridwar Redevelopment And Beautification Of L-Bund In Haridwar. Submission Date for this Tender is 29-12-2020. Dam Work Tenders in Haridwar Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 24-Dec-2020 | Corrigendum for Term and Condition | Technical Bid | 29-12-2020 |
| Name of Work: REDEVELOPMENT AT L-BAND, HARIDWAR | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | CIVIL WORK | |||
| 2 | 1.01 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs,saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier anddisposal of unserviceable materials and stacking of serviceable material to be used orauctioned, upto a lead of 1000 m including removal and disposal of top organic soil notexceeding 150 mm in thickness as per Technical Specification Clause 201.In area of thorny jungle S.O.R. 2-2-1-B | BI01010001010000000000000515BI0100001113 | 3.44 | Hectare |
| 3 | 1.02 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth leadupto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. S.O.R. 11-1-1-1 | BI01010001010000000000000515BI0100001114 | 76.26 | Cum |
| 4 | 1.03 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up,All kinds of soil to 50 m and lift up to 1.5 m. dsr item D.S.R. 2.28.1 | BI01010001010000000000000515BI0100001115 | 80.7 | Sqm |
| 5 | 1.04 | PCC Grade M-10 (Nominal mix 1:3:6): 10 graded stone aggregate 40 mm nominal size) Including all work T&P ETC as directed by Engineer-in-charge. S.O.R. 14-11-3 | BI01010001010000000000000515BI0100001116 | 384.62 | Cum |
| 6 | 1.05 | Providing and laying damp-proof course 50mm thick with cement concrete1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate20mm nominal size). Including all work T&P ETC as directed by Engineer-in-charge.(dsr rate) D.S.R. 4.11 | BI01010001010000000000000515BI0100001117 | 3.91 | Sqm |
| 7 | 1.06 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thickbed of dry brick ballast 40 mm nominal size, well rammed and consolidatedand grouted with fine sand, including necessary excavation, levelling &dressing & finishing the top smooth. as directed by Engineer-in-charge.(dsr rate) D.S.R. 4.17 | BI01010001010000000000000515BI0100001118 | 17 | Sqm |
| 8 | 1.07 | Reinforced cement concrete work in walls (any thickness), includingattached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up tofloor five level, excluding cost of centering, shuttering, finishing andreinforcement :t :Including all work T&P ETC as directed by Engineer-in-charge.(dsr rate)1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone\naggregate 20 mm nominal size) D.S.R. 5.2.2 | BI01010001010000000000000515BI0100001119 | 19.51 | Cum |
| 9 | 1.08 | Reinforced cement concrete work in beams, suspended floors, roofs havingslope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plainwindow sills, staircases and spiral stair cases above plinth level up tofloor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarsesand(zone-III) : 3 graded stone aggregate 20 mm nominal size).Including all work T&P ETC as directed by Engineer-in-charge.(dsr rate) D.S.R. 5.3 | BI01010001010000000000000515BI0100001120 | 35.02 | Cum |
| 10 | 1.09 | Centering and shuttering including strutting, propping etc. and removalof form work for :., complete at all levels as per drawing, specifications and instructions of the Engineer.(DSR RATE)Foundations, footings, bases for columns D.S.R. 4.3.1 | BI01010001010000000000000515BI0100001121 | 232.77 | Sqm |
| 11 | 1.1 | Supplying, fitting, and placing MS bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 S.O.R. 13-4 | BI01010001010000000000000515BI0100001122 | 5.3 | Rmtr |
| 12 | 1.11 | Brick masonry work in cement mortar in foundation complete excluding pointing andplastering as per drawing and technical specifications Clauses 600, 1202 & 1203 Brick masonry in 1:4 cement mortar D.S.R. 11.5.2 | BI01010001010000000000000515BI0100001123 | 26.82 | Cum |
| 13 | 1.12 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 230 mm thk.(Dsr items) Cement mortar 1:4 (1 cement : 4 coarse sand) D.S.R. 6.4.2 | BI01010001010000000000000515BI0100001124 | 46.37 | Cum |
| 14 | 1.13 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :115 mm thk 1:4 (dsr item) D.S.R. 6.13.2 | BI01010001010000000000000515BI0100001125 | 20.4 | Sqm |
| 15 | 1.14 | Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure asper technical specification Clauses 613.4 & 1204 S.O.R. 12.3 | BI01010001010000000000000515BI0100001126 | 615.98 | Sqm |
| 16 | 1.15 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :painting in internal wall and beams , slab. as per directions of Engineer-In-Charge DSR RATE D.S.R 13.41.1 | BI01010001010000000000000515BI0100001127 | 426.59 | Sqm |
| 17 | 1.16 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete. as per directions of Engineer-In-Charge DSR ITEM D.S.R. 13.8 | BI01010001010000000000000515BI0100001128 | 426.59 | Sqm |
| 18 | 1.17 | Providing and laying gang saw cut 18 mm thick, mirror polished premoulded and pre polished machine cut granite stone of required sizeand shape of approved shade, colour and texture in footpath, flooringin road side plazas and similar locations, laid over 20mm thick baseof cement mortar 1:4 (1cement : 4 coarse sand) including groutingthe joints with white cement mixed with matching pigment, epoxytouch ups etc. complete as per direction of Engineer-in-Charge.f engineer-in-charge.dsr item With granite stone of area less than 0.50 sqm. D.S.R. 16.86.1 | BI01010001010000000000000515BI0100001129 | 37.8 | Sqm |
| 19 | 1.18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete dsr item D.SR. 8.31 | BI01010001010000000000000515BI0100001130 | 50.88 | Sqm |
| 20 | 1.19 | Providing and fixing Ist quality ceramic glazed floor tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete ,DSR ITEM D.S.R. 11.37A | BI01010001010000000000000515BI0100001131 | 15.7 | Sqm |
| 21 | 1.2 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).DSR ITEM D.S.R. 10.28 | BI01010001010000000000000515BI0100001132 | 800 | Kg |
| 22 | 1.21 | 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat:DSR With common burnt clay F.P.S.(non modular) brick tile of class designation 10 D.S.R. 12.16.1 | BI01010001010000000000000515BI0100001133 | 15.7 | Sqm |
| 23 | 1.22 | Extra for Circular cutting including wastages in ceiling with: Block board construction flush door with 2nd class teak wood planks 20 mm thick DSR ITEM D.S.R. 12.27.1 | BI01010001010000000000000515BI0100001134 | 9 | Sqm |
| 24 | 1.23 | Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of first class teak wood and priming coat with approved steel primer all complete. D.S.R. 9.5 | BI01010001010000000000000515BI0100001135 | 0.81 | Sqm |
| 25 | 1.24 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws,excluding panelling which will be paid for separately, all complete DSR ITEM Window Frames 2nd class teak wood planks 20 mm thick DSR ITEM D.S.R. 9.5.1.1 | BI01010001010000000000000515BI0100001136 | 0.81 | Sqm |
| 26 | 1.25 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. as per directions of Engineer-In-Charge ,dsr rate (E&M) Group A D.S.R. (E&M) 1.10.3 | BI01010001010000000000000515BI0100001137 | 3 | Nos |
| 27 | 1.26 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required D.S.R. (E&M) 1.11 | BI01010001010000000000000515BI0100001138 | 2 | Nos |
| 28 | 1.27 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. as per directions of Engineer-In-Charge DSR(E&M) 6 pin 15/16 A socket outlet D.S.R. (E&M) 1.23.5 | BI01010001010000000000000515BI0100001139 | 2 | Nos |
| 29 | 1.28 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. as per directions of Engineer-In-Charge. DSR(E&M) 2 way 5/6 A switch D.S.R. (E&M) 1.24.2 | BI01010001010000000000000515BI0100001140 | 12 | Nos |
| 30 | 1.29 | Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as per directions of Engineer-In-Charge MR | BI01010001010000000000000515BI0100001141 | 4 | Nos |
| 31 | 1.3 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required as per directions of Engineer-In-Charge MR | BI01010001010000000000000515BI0100001142 | 1 | Nos |
| 32 | 1.31 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :as per directions of Engineer-In-Charge W.C. pan with ISI marked white solid plastic seat and lid D.S.R. 17.2.1 | BI01010001010000000000000515BI0100001143 | 3 | Nos |
| 33 | 1.32 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : as per directions of Engineer-In-Charge DSR ITEM One urinal basin with 5 litre white P.V.C. automatic flushing cistern D.S.R. 17.4.1 | BI01010001010000000000000515BI0100001144 | 2 | Nos |
| 34 | 1.33 | Providing and fixing wash basin with c.i bracket ,15 mm c.p brass pillar tabs,32 mm cp brass waste , of standard pattern including painting of fitting and brackets,cutting and making good the wall wherever req. white vitreous china wash basin size 630x450 mm with a pair of 15 nn c.p brass tap. : as per directions of Engineer-In-Charge wash basin D.S.R. 17.7.1 | BI01010001010000000000000515BI0100001145 | 4 | Nos |
| 35 | 1.34 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.DSR Soap dish D.S.R. 18.65 | BI01010001010000000000000515BI0100001146 | 2 | Nos |
| 36 | 1.35 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : as per directions of Engineer-In-Charge.DSR ITEM Single half stall urinal with 5 litre P.V.C. automatic flushing cistern D.S.R. 17.5.1 | BI01010001010000000000000515BI0100001147 | 2 | Nos |
| 37 | 1.36 | Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge.DSR ITEM 1216 (16 mm OD) pipe DSR 18.1.1 | BI01010001010000000000000515BI0100001148 | 18 | Rmtr |
| 38 | 1.37 | Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge.DSR ITEM 1620 (20 mm OD) pipe DSR 18.1.2 | BI01010001010000000000000515BI0100001149 | 18 | Rmtr |
| 39 | 1.38 | Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge.DSR ITEM 2025 (25 mm OD) pipe DSR 18.1.3 | BI01010001010000000000000515BI0100001150 | 18 | Rmtr |
| 40 | 1.39 | Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge.DSR ITEM 2532 (32 mm OD) pipe DSR 18.1.4 | BI01010001010000000000000515BI0100001151 | 18 | Rmtr |
| 41 | 1.4 | Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge.DSR ITEM 3240 (40 mm OD) pipe DSR 18.1.5 | BI01010001010000000000000515BI0100001152 | 18 | Rmtr |
| 42 | 1.41 | Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge.DSR ITEM 3241 (50 mm OD) pipe DSR 18.1.6 | BI01010001010000000000000515BI0100001153 | 25 | Rmtr |
| 43 | 1.42 | Providing and fixing unplasticised -PVC pipe clips of approved designto unplasticised - PVC rain water pipes by means of 50x50x50 mmhard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete.110MM DIA DSR ITEM D.S.R. 12.43.2 | BI01010001010000000000000515BI0100001154 | 100 | Rmtr |
| 44 | 1.43 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zoneIII) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : D.S.R. 19.7Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 D.S.R. 19.7.1.1 | BI01010001010000000000000515BI0100001155 | 1 | Nos |
| 45 | 1.44 | \nPLANTER RECTANGULAR PRECAST RCC FLOWER POT(SIZE = 2'-5') MR | BI01010001010000000000000515BI0100001156 | 25 | Nos |
| 46 | 1.45 | BENCH ( S/F OF PRE CAST CEMENT CONCRETE MADE BENCH SET ….HRDA… APPROVED RATE.(RCC PARK AND GARDEN BENCH ,SIZE: 5 FEET ) previous app. Rate Hrda | BI01010001010000000000000515BI0100001157 | 20 | Nos |
| 47 | 1.46 | (P/F M.S SELPHIE POINT) 1-NOS MR | BI01010001010000000000000515BI0100001158 | 35 | Sqm |
| 48 | 2 | COBBLE STONE (kadappa road flooring) | |||
| 49 | 2.01 | COBBLE STONE (kadappa road flooring) : Providing and fixing of kaddapa stone flooring over 150mm ( average) thk. Base of cement mortar 1:4:8(1 cement:4 coarse sand :8 aggregate) with joints finished flush. As per analysis | BI01010001010000000000000515BI0100001159 | 3576.1 | Sqm |
| 50 | 3 | HORTICULTURE WORK | |||
| 51 | 3.1 | Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.. Dsr item Providing & fixing Hedge Road Side D.S.R. (HORTI.) 6.12 | BI01010001010000000000000515BI0100001160 | 2927 | Nos |
| 52 | 3.2 | Providing and stacking of Clerodendrum inerme having ht. 25 cm to 30 cm multi branched in 20 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. Dsr item plants D.S.R. (HORTI.) 6.6 | BI01010001010000000000000515BI0100001161 | 500 | Nos |
| 53 | 4 | GROUND COVER | |||
| 54 | 4.1 | Providing and stacking of Daniella variegated, with 3 to 4 variegated leaves in 20 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. Dsr item plants D.S.R. (HORTI.) 6.11 | BI01010001010000000000000515BI0100001162 | 450 | Nos |
| 55 | 5 | CREEPERS | |||
| 56 | 5.01 | Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. Dsr item plants D.S.R. (HORTI.) 9.4 | BI01010001010000000000000515BI0100001163 | 110 | Nos |
| 57 | 5.02 | Providing and stacking of Quisqualis indicia of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. Dsr item plants D.S.R. (HORTI.) 9.12 | BI01010001010000000000000515BI0100001164 | 70 | Nos |
| 58 | 5.03 | Providing and stacking of Jasmine grandiflorum (chameli) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. . Dsr item plants D.S.R. (HORTI.) 9.8 | BI01010001010000000000000515BI0100001165 | 40 | Nos |
| 59 | 6 | TREES | |||
| 60 | 6.01 | Providing and Displaying Bismarckia Palm 115 to 180 cm ht., well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot as per direction of the officer-in-charge. Dsr item trees D.S.R. (HORTI.) 5.11 | BI01010001010000000000000515BI0100001166 | 15 | Nos |
| 61 | 6.02 | Providing and stacking of Bottle palm of ht. 210-240 cm bottom girth 30-35 cm well developed in big HDPE bags. Dsr item trees D.S.R. (HORTI.) 7.11 | BI01010001010000000000000515BI0100001167 | 33 | Nos |
| 62 | 6.03 | Providing and Displaying Travelers palm well developed with fresh & healthy foliage 120 to 150 cm ht. in 35 cm Cement Pot as per direction of the officer-in-charge .Dsr item trees D.S.R. (HORTI.) 5.42 | BI01010001010000000000000515BI0100001168 | 12 | Nos |
| 63 | 6.04 | Providing and Displaying Foxtail palm well developed with fresh & healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the officer-in-charge. Dsr item trees D.S.R. (HORTI.) 5.3 | BI01010001010000000000000515BI0100001169 | 10 | Nos |
| 64 | 6.05 | Providing and displaying of Areca Palm having ht. 1.80 m to 2.10 m with 8 to 10 suckers, well developed, fresh and healthy with lush green foliage in 30 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.Dsr item trees D.S.R. (HORTI.) 3.21 | BI01010001010000000000000515BI0100001170 | 5 | Nos |
| 65 | 6.06 | Providing and stacking of Plumeria alba of height 120-135 cm. with 2-3 branches in bags of size 30 cm as per direction of the officer-in-charge. Dsr item trees D.S.R. (HORTI.) 7.69 | BI01010001010000000000000515BI0100001171 | 5 | Nos |
| 66 | 6.07 | Providing & fixing Hanging Flower Pot (Rcc pergola Top Face) MR | BI01010001010000000000000515BI0100001172 | 40 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
