Maintenance Of Isbt Sarai Kale Khan Converting Of Waiting Hall Into Office Space For The Enforcement Team At Isbt Sarai Kale Khan, Isbt Sarai Kale Khan Delhi-Delhi
TDR : 26347650
Tender Notice
BOQ
Expired
Isbt Sarai Kale Khan Delhi
Delhi
Maintenance Of Isbt Sarai Kale Khan Converting Of Waiting Hall Into Office Space For The Enforcement Team At Isbt Sarai Kale Khan
Name of work: Maintenance of ISBT Sarai Kale Khan.SH: Converting of waiting hall into office space for the enforcement team at ISBT Sarai Kale khan.
Sl.No.
Item Description
Item Code / Make
Quantity
Units
1
1
Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or peasized gravel spread at 6 cubic decimeter per square metre, including preparation of surface but excluding grading complete with :\na. Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322
BI01010001010000000000000515BI0100001113
112.5
sqm
2
2
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.\na. Hot finished welded type tubes
BI01010001010000000000000515BI0100001112
723.58
kg
3
3
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :\na. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
BI01010001010000000000000515BI0100001111
8.96
sqm
4
4
Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete :\na. 12 mm thick
BI01010001010000000000000515BI0100001110
65.7
sqm
5
5
Providing and fixing glazing in aluminium/steel frame, door, window, ventilator shutters and partition etc. with aluminium/steel/rubber bidding complete as per directions of engineer-in-charge. (cost of aluminium/steel/rubber snap beading shall be paid in basic item):\na. with 4mm thick ACP.
BI01010001010000000000000515BI0100001114
126.48
sqm
6
6
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.\na. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
