Supply And Installation Of Lab Equipment ( One Bacterial Fermentor With Accessories ) For University School Of Biotechnology At Ggsipu, USBT GGSIPU-Delhi

Supply And Installation Of Lab Equipment ( One Bacterial Fermentor With Accessories ) For University School Of Biotechnology At Ggsipu - Bacterial Fermenter With Required Utilities N Na. Culture Vessel N ( I ) Double Wall Glass Vessel With Working Volume 5 Litre, Total Volume Should Be Greater Than 6.5 Litre, Minimum Volume Should Not Be More Than 0.6 Litre. Provision Of Interchangeable Vessels ( 1 Litre, 2 Litre, 10 Litre ) Is Required. N ( Ii ) Stainless Steel Stand To Support The Culture Vessel N ( Iii ) Impeller: 3 X 6-Blade Segment Rushton Impeller, Stirrer Diameter: 64 Mm, N ( Iv ) 1 X Ring Sparger ( Or Micro Spaarger ) , Hose Nozzle For Hose Connection, Id = 3.2 Mm N ( V ) An Adapter Should Be Available To Reduce The Total Height Of The System During The Autoclave N ( Vi ) Stirrer Shaft With Single Mechanical Seal And Direct Coupling N ( Vii ) Inlet / Exhaust Air Filter ( Ptfe ) : Pore Size 0.2 Μm, Filter Area Not Less Than 20 Cm², Autoclavable At Least 20 Times At 121 °C N ( Viii ) Temperature Control: Pt 100 With A Range Of 0-1500C ( Temp. Control: 0-800C ) With Accuracy 0.10C N ( Ix ) Motor With Magnetic Motor Coupling : Maintenance Free, Top Drive, Power: 200W, 20-1500 Rpm Nb. Control Tower N ( I ) Touch Screen Display Of Around 10-12 N ( Ii ) Process Control Parameters, Measurement Range And Probes For: Temperature ( 00C-800C With 0.10C Resolution ) , Ph ( 2-12 Ph With 0.01 Ph Resolution ) , Do ( 0-100% With 0.1% Resolution ) , Foam, Level And Redox. Standard Fermenter Probes / Sensors From Hamilton Or Mettler For Ph And Do N ( Iii ) Additionally, If Required Same Control Tower Can Be Used For Single Use / Roking Motion Bioreactor ( After Modification ) N ( Iv ) System Should Have Automatic Controls Of Ph, Do, Temperature, Antioam N ( V ) 3 Nos Integrated Fast Load Pump With Fixed Speed 44 Rpm ( On / Off Control ) And Minimum 1No Integrated Fast Load Pump With Variable Speed. N ( Vi ) Extra Ports To Input Ancilliary Equipment Signal Data Inputs ( 0–10 V Or 4-20 Ma ) For Fermenter Control Panel Such As Exist Gas, Load Cell Or External Pump N ( Vii ) Should Be Facilitated With Usb Port, Ethernet N ( Viii ) Same Control Tower Can Be Configured For Other Vessels Including Rocking Motion Bioreactor Or Single Use Bioreactor. Minimal Modification Is Allowed For That. Nc. Aeration Module N ( I ) Air With O2 Enrichment With Gas Flow Ratio Mixing. Scope For The Possible Addition Of At Least One More Additional Gas ( Eg. N2, Co2 ) N ( Ii ) Max. Total Flow: Upto 20 L / Min, Having Accuracy ±5 % Full Scale Nd. Operating Software Nsystem Should Be Operated With Scada Sofware Having Facility Of N ( I ) On-Line And Off-Line Sample Data Management, Visualization, Evaluation, N ( Ii ) Expanded Data Recording And Data Archiving Capabilities, N ( Iii ) Alarm Recording And Transmission To Multimedia Devices And N ( Iv ) Flexible Device Connection Facility. N ( V ) Allow Inputs External Signals For Integrated Analysis N ( Vi ) With Qualification Documents ( If Required ) Ne. Toolkit: Essential Tool Kit Containing The Various Septum, O-Rings, Extra Filters, Extra Do Membranes, Electrolytes, Standard Buffer, Needles Etc Nf. Bottles: Reagent Feed Bottles For Acid, Base, Antifoam And At Least Two Feed Bottle With The Required Number Of Connectors, Two Extra Bottles For Sample Ports Ng. Pc & Printer: Suitable Barnded Pc And Branded Color Laser Printer With Ups Nh. Other Sensor N ( I ) Co2 Sensor With A Control Range Of 0 – 100% Should Be Available As An Option, N ( Ii ) Balance Substrate 6~10 Kgmax. |1 G And 50~100 Kg Max.|2 G As An Option. N ( Iii ) Turbidity Probe As An Option Ni. Suitable Utilities N ( I ) Automatic Autoclave, Chiller, Air Compressor N ( Ii ) 2 Kva Ups With At Least 30 Minutre Back Up As An Option Nj. Special Clauses N ( I ) At Least Five Years Of Warranty From Date Of Completion Of Installation And Sucessful Demonstration. N ( Ii ) The List Of Users ( Industry And Institutes ) Has To Be Submitted Along With Tender N ( Iii ) Should Have Installation Throughout India Of More Than 50 Nos Of Same / Similar Models, At Least 5 In Last One Year Nk. Important Note N ( I ) All Specs Must Be Supported With Printed Brochure / Data Sheet Nl. Company Annual Turnover ( Inr ) : N Item2 1 Nos

Refer document

INR 100000.0 /-

Refer document

Name of Work: Supply and Installation of Lab Equipment (one bacterial fermentor with accessories) for University School of Biotechnology at GGSIPU
	Item Description	Item Code / Make	Quantity	Units
1	BACTERIAL FERMENTER WITH REQUIRED UTILITIES\n\nA. Culture Vessel \n(i) Double wall glass vessel with working volume 5 litre, total volume should be greater than 6.5 litre, Minimum volume should not be more than 0.6 litre. Provision of interchangeable vessels (1 litre, 2 litre, 10 litre) is required.\n(ii) Stainless steel stand to support the culture vessel\n(iii) Impeller: 3 x 6-blade segment rushton impeller, Stirrer diameter: 64 mm,\n(iv) 1 x Ring sparger ( or micro spaarger), Hose nozzle for hose connection, ID = 3.2 mm\n(v) An adapter should be available to reduce the total height of the system during the autoclave\n(vi) Stirrer shaft with single mechanical seal and direct coupling\n(vii) Inlet/exhaust air filter (PTFE): Pore size 0.2 µm, Filter area not less than 20 cm², Autoclavable at least 20 times at 121 °C\n(viii) Temperature control: pt 100 with a range of 0-1500C (Temp. Control: 0-800C) with accuracy 0.10C\n(ix) Motor with magnetic motor coupling : Maintenance free, top drive, Power: 200W, 20-1500 rpm\nB. Control Tower \n(i) Touch screen display of around 10"-12"\n(ii) Process control parameters, measurement range and probes for: Temperature (00C-800C with 0.10C resolution), pH (2-12 pH with 0.01 pH resolution), DO (0-100% with 0.1% resolution), Foam, level and Redox. Standard fermenter probes/sensors from Hamilton or Mettler for pH and DO\n(iii) Additionally, if required same control tower can be used for single use / roking motion bioreactor ( After modification )\n(iv) System should have automatic controls of pH, DO, temperature, Antioam\n(v) 3 Nos integrated Fast Load pump with fixed speed 44 rpm (on/off control) and minimum 1no integrated Fast Load pump with variable speed.\n(vi) Extra ports to input ancilliary equipment signal data inputs (0–10 V or 4-20 mA) for fermenter control panel such as exist gas, load cell or external pump\n(vii) Should be facilitated with USB port, Ethernet\n(viii) Same control tower can be configured for other vessels including rocking motion bioreactor or single use bioreactor. Minimal modification is allowed for that.\nC. Aeration Module\n(i) Air with O2 Enrichment with Gas Flow Ratio mixing. Scope for the possible addition of at least one more additional gas (eg. N2, CO2)\n(ii) Max. total flow: upto 20 l/min, having accuracy ±5 % full scale\nD. Operating Software \nSystem should be operated with SCADA sofware having facility of \n(i) On-line and off-line sample data management, visualization, evaluation, \n(ii) Expanded data recording and data archiving capabilities, \n(iii) Alarm recording and transmission to multimedia devices and \n(iv) Flexible device connection facility. \n(v) Allow inputs external signals for integrated analysis\n(vi) With qualification documents ( If required)\nE. Toolkit: Essential tool kit containing the various septum, O-rings, extra filters, extra DO membranes, electrolytes, standard buffer, needles etc\nF. Bottles: Reagent feed bottles for acid, base, antifoam and at least two feed bottle with the required number of connectors, two extra bottles for sample ports \nG. PC & Printer: Suitable barnded PC and branded color laser Printer with UPS\nH. Other Sensor \n(i) CO2 sensor with a control range of 0 – 100% should be available as an option,\n(ii) Balance substrate 6~10 kgmax. |1 g AND 50~100 kg max.|2 g as an option. \n(iii) Turbidity probe as an option\nI. Suitable Utilities \n(i) Automatic Autoclave, Chiller, Air Compressor\n(ii) 2 kVA UPS with at least 30 minutre back up as an option \nJ. Special clauses \n(i) At least five years of warranty from date of completion of installation and sucessful demonstration.\n(ii) The list of users (industry and institutes) has to be submitted along with tender\n(iii) Should have installation throughout India of more than 50 nos of same/similar models, at least 5 in last one year\nK. Important Note \n(i) All specs must be supported with printed brochure/data sheet \nL. Company annual turnover (INR):\n	item2	1	Nos