}

Construction Of Generator Shed At Chumur ., Chumur Nyoma-Jammu And Kashmir

Public Works Department-PWD has published Construction Of Generator Shed At Chumur .. Submission Date for this Tender is 17-12-2020. Shed Construction Tenders in Chumur Nyoma Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

26228249
Construction Of Generator Shed At Chumur .
Open Tender
Indian
Jammu And Kashmir
Chumur Nyoma
17-12-2020

Tender Details

Construction Of Generator Shed At Chumur .

Key Value

Document Fees
INR 500 /-
EMD
INR 17700.0 /-
Tender Value
INR 8.85 Lakhs /-

BOQ Items

Name of Work: Construction of Generator Shed at Chumur.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches, drains, pipes and cables etc. (not exceeding 1.5mtr in width or 10 sqm on plan) including dressing of sides and ramming of bottoms,1 lift upto 1.5mtr including getting out excavated soil and disposal of surplus soil as directed, within a lead of 50 mtr. 36.57 Cum
2 2 Dumping stone including cost of stones. On horizontal level. 9.52 Cum
3 3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering with 1;4;8 (1cement ;4sand; 8aggregate) 40mmn nominal size Crush 2.84 Cum
4 4 Random rubble masonry with hard stone from quarry in foundation & plinth incl. levelling up with cement 1:6:12 with 1:6 mix cement mnortar.(1cement :6coarse sand) 22 Cum
5 5 Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3(1cement :3 coarse sand), cost of required centering, shuttering complete. 1:3:6 (1cement :3coarse sand 6graded stone agg. 20Omm nominal size) Crushed 23.05 Cum
6 6 Providing wood work in frame of doors, windows, clerestory windows and other frame, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately).First class kail wood. 0.38 Cum
7 7 Providing and fixing glazed shutter for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including ISI mark M.S pressed butt hinges bright finished of required size with necessary screws.First class Kail wood. 7.43 Sqm
8 8 Providing and fixing panelled or panelled and glazed shutters for door and winndows and clerestory windows including ISI marked M.S pressed butt hinges bright finished of required size with necessary screw etc. (kail wood 35mm) 3.9 Sqm
9 9 12mm thick pre laminated particle board decorative lamination on both sides grade-I medium density floats pressed 3 layers particles boards FPT-I or graded wood particals boards FPT-I conforming to IS-3087 marked bonded etc. qty vide item no 10\n 2.14 Sqm
10 10 15mm thick cement plaster on rough side of single or half brick wall of mixed 1:4 (1 cement 4sand) 76.48 Sqm
11 11 Providing and applying plaster of pairs putty of 2mm thickness over plaster surface to prepare the surface even and smooth complete. 25.46 Sqm
12 12 Distempering with 1st quality acrylic washable distember (ready made ) of approved manufacture and of required shade/ colour complete. (new work 2 or more code) \n 25.46 Sqm
13 13 Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size dashed over and including the fresh plaster in two layer under layer 12mm cement plaster 1:4(1 cement : coarse sand)etc. 91.82 Sqm
14 14 Finishing wall with water proofing cement paints required shade. New work 2 or more coats applied @ 3.84kgs /10sqm 91.82 Sqm
15 15 15 cm thick mud phuska etc.Complete Job\nRoofing\n 39.49 Sqm
16 16 Providing joist (karries) and planks including hoisting fixing in position and applying wood preservative on unexposed surface etc. Complete with : Budloo wood\n 92.89 Cft
17 17 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception, of pipes and fittings. 1 No
18 18 Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.Long pan pattern white vitreous china W.C. pan of size 580 mm. 1 No
19 19 Providing and fixing ISI mark oxide M.S sliding door bolt with nut and screws etc complete 2 No
20 20 Providing and fixing SI mark oxide M.S tower bolt with nut and screws etc complete. Size 100x10mm. 9 No
21 21 Providing and fixing SI mark oxide M.S tower bolt with nut and screws etc complete. Size 150X10mm. 2 No
22 22 Providing and fixing ISI mark oxide M.S handle bolt with and screws etc complete 75mm. 9 No
23 23 Suppying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part1 and M.S. top cover of required thickness for rolling shutters. 80x0.90 mm M.S. laths with 0.90 mm thick\n 9.2 Sqm
24 24 Providing and fixing ball bearing for rolling shutters. 2 No
25 25 Providing and fixing SI mark oxide M.S tower bolt with nut and screws etc complete. Size 150X10mm. 2 No
26 26 Carriage of material by mechanical transport \nCement/Steel an avg. lead 130 kms.\n 10.21 MT
27 27 Sand an avg. lead 08 kms. 22.22 Cum
28 28 Stone agg. an. avg. lead 60 Kms. 35.35 Cum
29 29 Stone an avg. lead 10 kms. 9.52 Cum
30 30 Timber an avg. lead 130 Km. 3.4 Cum
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail