Public Works Department-PWD has published Proposed Construction Of G 1 Storied Market And Open Proposed Construction Of G 1 Storied Market And OpenShed At Kakraban Market Complex , Kakraban , Udaipur , Gomati District , Tripura . Sh Building Balance Works Only ( 2NdCall ) . . Submission Date for this Tender is 21-12-2020. Building Work Tenders in Kakraban Tripura. Bidders can get complete Tender details and download the document.
Name of Work: Proposed construction of G+1 Storied Market and Open Shed at Kakraban Market Complex, Kakraban, Udaipur, Gomati District, Tripura/SH: Building balance works only | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. | BI01010001010000000000000515BI0100001112 | 115.95 | Cum |
2 | 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.All kinds of soil\n | BI01010001010000000000000515BI0100001113 | 77.3 | Cum |
3 | 3 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. \n | BI01010001010000000000000515BI0100001114 | 7.675 | Cum |
4 | 4 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/Lindane emulsifiable concentrate of 20%\n | BI01010001010000000000000515BI0100001115 | 29.88 | ltr |
5 | 5 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment as per IS: 6313 (Part III)- Latest revision (excluding the cost of chemical emulsion):Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres/sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. \n | BI01010001010000000000000515BI0100001116 | 95 | mtr |
6 | 6 | Treatment of soil under plinth filling using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with sand filling:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.\n | BI01010001010000000000000515BI0100001117 | 15 | Sqm |
7 | 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -a)1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001118 | 3.175 | Cum |
8 | 7.1 | b)1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size)\n | BI01010001010000000000000515BI0100001119 | 31.058 | Cum |
9 | 8 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification\n | BI01010001010000000000000515BI0100001120 | 15 | Kg |
10 | 9 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. | BI01010001010000000000000515BI0100001121 | 95 | Sqm |
11 | 10 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-\n -All work upto plinth level:1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001122 | 3.868 | Cum |
12 | 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-a)RCC work in suspended floors, roofs having slope upto 15° landings, balconies, shelves and chajjas.a)1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001123 | 2.5 | Cum |
13 | 11.1 | b)RCC work in beams, lintels, bands, plain window sills, staircases and spiral staircases excluding precast spiral staircase.i)1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001124 | 1.0125 | Cum |
14 | 12 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level.Thermo-Mechanically Treated bars/ Cold twisted deformed steel bars. | BI01010001010000000000000515BI0100001125 | 1050 | Kg |
15 | 13 | Centering shuttering including struttings, propping etc. and removal of form work for:a)Foundations, footings, bases for columns etc. for mass concrete with timber plank\n | BI01010001010000000000000515BI0100001126 | 5.4 | Sqm |
16 | 13.1 | b)Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply. | BI01010001010000000000000515BI0100001127 | 18 | Sqm |
17 | 13.2 | c)Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply.\n | BI01010001010000000000000515BI0100001128 | 13.05 | Sqm |
18 | 13.3 | d)Edges of slabs and breaks in floors and walls under 20 cm. wide. | BI01010001010000000000000515BI0100001129 | 2.75 | mtr |
19 | 13.4 | e)Weather shade, Chajjas, corbels etc., including edges. | BI01010001010000000000000515BI0100001130 | 10.5 | Sqm |
20 | 14 | First class brick work in foundation and plinth including cost of all materials as required complete.A)In cement mortar 1:4 ( 1 cement : 4 fine sand ). | BI01010001010000000000000515BI0100001131 | 23.75 | Cum |
21 | 14.1 | B)In cement mortar 1:6 ( 1 cement : 6 fine sand ). | BI01010001010000000000000515BI0100001132 | 19.064 | CUm |
22 | 15 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete.a)In cement mortar 1:6 ( 1 cement : 6 fine sand ). | BI01010001010000000000000515BI0100001133 | 10.875 | CUm |
23 | 16 | Half brick masonry with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-a)In cement mortar 1:4 ( 1 cement : 4 fine sand). | BI01010001010000000000000515BI0100001134 | 43.76 | Sqm |
24 | 17 | Extra for providing & placing in position 2 nos 6mm dia MS bars at every 4th course of half brick masonry work including anchorage in joints of 75mm in each side in superstructure for all level including cost of all materials as required complete:-a)In cement mortar 1:4 ( 1 cement : 4 fine sand). | BI01010001010000000000000515BI0100001135 | 43.76 | Sqm |
25 | 18 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters.a)35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. | BI01010001010000000000000515BI0100001136 | 5.76 | Sqm |
26 | 19 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.Fixed to openings /wooden frames with rawl plugs screws etc. | BI01010001010000000000000515BI0100001137 | 625 | kg |
27 | 20 | Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stone aggregate 20mm nominal size) | BI01010001010000000000000515BI0100001138 | 100 | Nos |
28 | 21 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :i)300 x 16 mm | BI01010001010000000000000515BI0100001139 | 10 | Nos |
29 | 22 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :a)300 x 10 mm | BI01010001010000000000000515BI0100001140 | 10 | Nos |
30 | 23 | Providing and fixing fan clamp type-I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete. | BI01010001010000000000000515BI0100001141 | 3 | Nos |
31 | 24 | Providing and fixing hand rail using structural steel etc. of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as required:-a)M.S. tube | BI01010001010000000000000515BI0100001142 | 684.25 | kg |
32 | 25 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:-a)In stringers, treads, landing etc. of stair cases including use of chequered plate wherever required, all complete. | BI01010001010000000000000515BI0100001143 | 15 | kg |
33 | 26 | Providing and fixing M.S. round holding down bolts with nuts and wahser plates complete as per standard design. | BI01010001010000000000000515BI0100001144 | 27.731 | kg |
34 | 27 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 275mm long wire springs grade No.2 and M.S. top cover of required thickness for rolling shutters & with handles, hold fast including embedding in cement concrete of required grade required for fixing in position, all necessary fittings, including applying of approved steel primer etc. complete as required:-a)80xl.25mm M.S. laths with 1.25 mm thick top cover. | BI01010001010000000000000515BI0100001145 | 22.5 | Sqm |
35 | 28 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.a)Hot finished welded type tubes | BI01010001010000000000000515BI0100001146 | 241.45 | kg |
36 | 29 | Providing and laying 1st quality ceramic glazed floor tiles of approved size conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades as approved by Engineer-in-charge over 20 mm thick bed of cement mortar 1 : 4 (1 cement : 4 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.i)Ceramic Glazed Tiles 1st quality 600 x 600mm in all shades and designs | BI01010001010000000000000515BI0100001147 | 33.64 | Sqm |
37 | 30 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001148 | 455.462 | Sqm |
38 | 31 | Providing and fixing Kota stone in floors over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with ordinary cement mixed with pigment of matching shade, including rubbing and polishing complete.a)Kota stone slab 25mm thick | BI01010001010000000000000515BI0100001149 | 834.69 | Sqm |
39 | 32 | Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1 : 3 ( 1 cement : 3 fine sand ) and joined with ordinary cement slurry mixed with pigment to match the shade of slabs, including rubbing and polishing complete. | BI01010001010000000000000515BI0100001150 | 44.062 | Sqm |
40 | 33 | Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge. | BI01010001010000000000000515BI0100001151 | 5 | Sqm |
41 | 34 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete.a)40 mm thick | BI01010001010000000000000515BI0100001152 | 152.225 | Sqm |
42 | 35 | Providing and fixing precast chequered cement concrete tiles 18 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry including rubbing and cleaning complete as per direction of the Engineer-in-Charge. | BI01010001010000000000000515BI0100001153 | 50.5 | Sqm |
43 | 36 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.a)0.63mm thick with zinc coating not less than 275gm/m2 | BI01010001010000000000000515BI0100001154 | 35 | Sqm |
44 | 37 | Providing ridges or hips of width 60 cm over all width plain G.S.sheet fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia. G.I. limpet and bitumen washers including a coat of approved steel primer and two coats of approved paint\ncomplete.a)0.63mm thick with zinc coating not less than 275gm/m2 | BI01010001010000000000000515BI0100001155 | 12 | Meter |
45 | 38 | 12 mm cement plaster of mix \na)In cement mortar 1 : 4 (1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001156 | 529.52 | Sqm |
46 | 38.1 | b)In cement mortar 1 : 6 (1 cement : 6 fine sand) | BI01010001010000000000000515BI0100001157 | 70.5 | Sqm |
47 | 39 | 15 mm cement plaster on the rough side of single or half brick wall of mix.a)In cement mortar 1 : 6 (1 cement : 6 fine sand) | BI01010001010000000000000515BI0100001158 | 85.5 | Sqm |
48 | 40 | 6 mm cement plaster of mix: \na)In cement mortar 1 : 3 ( 1 cement : 3 fine sand) | BI01010001010000000000000515BI0100001159 | 15.5 | Sqm |
49 | 41 | Neat cement punning. | BI01010001010000000000000515BI0100001160 | 130.52 | Sqm |
50 | 42 | Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on new work ( two or more coats ), over and including water thinnable priming coat to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] | BI01010001010000000000000515BI0100001161 | 2897.09 | Sqm |
51 | 43 | Finishing walls with premium acrylic smooth exterior paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 1.43 litre/10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] | BI01010001010000000000000515BI0100001162 | 1267.18 | Sqm |
52 | 44 | Applying priming coat: [Payment shall be made after submission of Test Certificate issued by the Manufacturer- a)With ready mixed pink primer of approved brand and manufacture on wood work ( hard & soft wood ). | BI01010001010000000000000515BI0100001163 | 12.96 | Sqm |
53 | 44.1 | b) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel, galvanised iron / steel work. | BI01010001010000000000000515BI0100001164 | 366.05 | Sqm |
54 | 45 | Painting with synthetic enamel paint ( two or more coats ) of required colour of approved brand and manufacture on new work to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] | BI01010001010000000000000515BI0100001165 | 366.05 | Sqm |
55 | 46 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) :-a)For fixed portion of approved quality:- i)Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). | BI01010001010000000000000515BI0100001166 | 141.75 | kg |
56 | 46.1 | b)For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):-i)Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). | BI01010001010000000000000515BI0100001167 | 94.5 | kg |
57 | 47 | Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :-a)With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm ) | BI01010001010000000000000515BI0100001168 | 26.25 | Sqm |
58 | 48 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests. | BI01010001010000000000000515BI0100001169 | 6 | Nos |
59 | 49 | Providing and Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :\n a)One urinal basin with 5 litre white P.V.C. automatic flushing cistern | BI01010001010000000000000515BI0100001170 | 6 | Nos |
60 | 50 | Providing and Fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. Automatic flushing cistern, with fittings, standard size G.I. flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required :Single squatting plate with 5 litre P.V.C. automatic flushing cistern. | BI01010001010000000000000515BI0100001171 | 2 | Nos |
61 | 51 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | BI01010001010000000000000515BI0100001172 | 4 | Nos |
62 | 52 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. a)Semi rigid pipe.32 mm dia | BI01010001010000000000000515BI0100001173 | 20 | mtr |
63 | 52.1 | b)Flexible pipe.32 mm dia | BI01010001010000000000000515BI0100001174 | 20 | mtr |
64 | 53 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular shape 450 mm dia | BI01010001010000000000000515BI0100001175 | 4 | Nos |
65 | 54 | Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. | BI01010001010000000000000515BI0100001176 | 4 | Nos |
66 | 55 | Providing and fixing toilet paper holder :C.P. brass | BI01010001010000000000000515BI0100001177 | 4 | Nos |
67 | 56 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg/cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:a)Single socketed pipe - 110 mm OD | BI01010001010000000000000515BI0100001178 | 91.8 | mtr |
68 | 57 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:a)Coupler i)110mm | BI01010001010000000000000515BI0100001179 | 12 | Nos |
69 | 57.1 | Single equel tee without door: i) 110 X 110 X 110mm | BI01010001010000000000000515BI0100001180 | 12 | Nos |
70 | 57.2 | c)Single equal tee with door i)110 x 110 x 110 mm | BI01010001010000000000000515BI0100001181 | 12 | Nos |
71 | 57.3 | d)Bend 87.5 i)110mm | BI01010001010000000000000515BI0100001182 | 12 | Nos |
72 | 57.4 | e)Plain shoe i)110 mm | BI01010001010000000000000515BI0100001183 | 12 | Nos |
73 | 57.5 | f)Double equal junction of required degree without door110x110x110 x110 mm | BI01010001010000000000000515BI0100001184 | 10 | Nos |
74 | 57.6 | g)Double equal junction of required degree with door110x110x110 x110 mm | BI01010001010000000000000515BI0100001185 | 10 | Nos |
75 | 58 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete.a)110mm | BI01010001010000000000000515BI0100001186 | 180 | Nos |
76 | 59 | Providing and fixing to the inlet mouth of rain water pipe PTMT grating with thickness of 8mm and weighing not less than 100gm. complete. a)100mm | BI01010001010000000000000515BI0100001187 | 12 | Nos |
77 | 60 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 6 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion:Single socketed pipe - 110 mm OD | BI01010001010000000000000515BI0100001188 | 200 | meter |
78 | 61 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. | BI01010001010000000000000515BI0100001189 | 4 | Nos |
79 | 62 | Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms. | BI01010001010000000000000515BI0100001190 | 4 | Nos |
80 | 63 | Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSK screws. | BI01010001010000000000000515BI0100001191 | 50.4 | meter |
81 | 64 | Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-incharge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter) | BI01010001010000000000000515BI0100001192 | 17.64 | sqm |
82 | 65 | Providing and fixing G.I. pipes complete with G.I.\nfittings including trenching and refilling etc.\nExternal work nominal bore\na)25 mm dia. nominal bore | BI01010001010000000000000515BI0100001193 | 70 | meter |
83 | 65.1 | b)40 mm dia. nominal bore | BI01010001010000000000000515BI0100001194 | 90 | meter |
84 | 66 | Providing and fixing G.I pipes complete with G.I. fittings and clamps, including making good the walls/floor etc. concealed pipe including painting two coats or more with anticorrosive bitumastic paint, cutting chases and making good the same.i)15 mm dia nominal bore | BI01010001010000000000000515BI0100001195 | 115 | meter |
85 | 66.1 | ii)20 mm dia. nominal bore | BI01010001010000000000000515BI0100001196 | 50 | meter |
86 | 67 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm nominal bore | BI01010001010000000000000515BI0100001197 | 20 | nos |
87 | 68 | Providing and fixing brass bib cock of approved quality :15 mm nominal bore | BI01010001010000000000000515BI0100001198 | 24 | nos |
88 | 69 | Providing and fixing brass stop cock of approved quality :15 mm nominal bore | BI01010001010000000000000515BI0100001199 | 24 | nos |
89 | 70 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):a)25 mm nominal bor | BI01010001010000000000000515BI0100001200 | 7 | nos |
90 | 70.1 | b)40 mm nominal bore | BI01010001010000000000000515BI0100001201 | 7 | nos |
91 | 71 | Providing and fixing gun metal non-return valve of approved quality (screwed end):a)25 mm nominal bore.Vertical | BI01010001010000000000000515BI0100001202 | 5 | nos |
92 | 71.1 | b)40 mm nominal bore.Vertical | BI01010001010000000000000515BI0100001203 | 5 | nos |
93 | 72 | Providing and fixing ball valve (brass) of approved\nquality complete :15 mm nominal bore | BI01010001010000000000000515BI0100001204 | 5 | nos |
94 | 73 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | BI01010001010000000000000515BI0100001205 | 4000 | ltr |
95 | 74 | Constructing masonry Chamber 30x30x50 cm, inside , in brick work in cement mortar 1:4 (1 cement :4 fine sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :With Second Class bricks | BI01010001010000000000000515BI0100001206 | 4 | nos |
96 | 75 | Painting G.I. pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality : i)25 mm diameter pipe | BI01010001010000000000000515BI0100001207 | 70 | mtr |
97 | 75.1 | ii)40 mm diameter pipe | BI01010001010000000000000515BI0100001208 | 90 | mtr |
98 | 76 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making longbscrews etc. complete (New work) i)15 mm nominal bore | BI01010001010000000000000515BI0100001209 | 15 | Nos |
99 | 76.1 | ii)20 mm diameter pipe | BI01010001010000000000000515BI0100001210 | 15 | Nos |
100 | 76.2 | iii)25 mm diameter pipe | BI01010001010000000000000515BI0100001211 | 15 | Nos |
101 | 76.3 | iv)40 mm diameter pipe | BI01010001010000000000000515BI0100001212 | 20 | Nos |
102 | 77 | Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. | BI01010001010000000000000515BI0100001213 | 12 | Nos |
103 | 78 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 1st class bricks in cement mortar 1:4 (1 cement : 4 fine sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 fine sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 fine sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets | BI01010001010000000000000515BI0100001214 | 1 | No |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail