| 1 | 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed. | | 300 | Square meter |
|---|
| 2 | 2 | Dismantling of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles all as specified and directed. | | 12 | Cubic Meter |
|---|
| 3 | 3 | Demolition of cement concrete of any description complete all as specified. | | 10.75 | Cubic Meter |
|---|
| 4 | 4 | Disconnecting, Dismantling water tanks capacity exc 500ltr and exc 1000 Ltrs capacity and removing to store all as specified and directed. | | 6 | Each |
|---|
| 5 | 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for as directed. | | 1 | Quintal |
|---|
| 6 | 6 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified. | | 89 | Each |
|---|
| 7 | 7 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete. | | 21 | Each |
|---|
| 8 | 8 | Brickwork with using subclass `B' bricks (Old Size), straight or curved on plan exc 6m mean radius, built in CM(1:6) as specified. | | 8 | Cubic Meter |
|---|
| 9 | 9 | Brickwork with using subclass `B' bricks (Old Size), straight or curved on plan exc 6m mean radius, built in CM(1:4) as specified. | | 20 | Square meter |
|---|
| 10 | 10 | Factory made, 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass / gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part - I section 8.20 (a), all as specified and directed by Engr-in-Charge | | 6.66 | Square meter |
|---|
| 11 | 11 | Factory made, 35mm thick 2nd class hard wood, plain framed, paneled shutters with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete, all as specified and directed by Engr-in-Charge. | | 13.7825 | Square meter |
|---|
| 12 | 12 | Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame made out of mild steel tubes for top and bottom rails . Mild steel frame shall be covered with heat molded plain cover PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and gap insert for top rail and bottom rail ; Paneling of plain colour PVC sheet to be fitted in the mild steel frame welded /sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the frame at site as per specification clause No 8B.1 to 8B.10 and drawing on page No 146 of MES SSR-2010 Part-II. | | 28.3692 | Square meter |
|---|
| 13 | 13 | Factory made solid PVC flush shutters door/cupboard shutters 30mm thick with 2mm thick moulded prelam PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face complete all as specified and directed | | 19.2 | Square meter |
|---|
| 14 | 14 | Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing on Page No 150 MES SSR-2004 Part-II and as directed by the Engr- in-Charge. | | 93.92 | Running metre |
|---|
| 15 | 15 | Pressed steel frames of size 105x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate including filling follow of frame with PCC 1:3:6 type Co using 12.5mm graded stone aggregate, etc complete all as specified as directed. | | 22.35 | Running metre |
|---|
| 16 | 16 | Pressed steel frames of size 125x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type Co (1:3:6 )(using 12.5mm graded aggregate ,etc complete all as specified as directed. | | 18.4 | Running metre |
|---|
| 17 | 17 | Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified . | | 40 | Each |
|---|
| 18 | 18 | Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 300 mm long. | | 18 | Each |
|---|
| 19 | 19 | Continuous (piano) hinges mild steel, bright finish or electro glvanised 30mm width of flaps(when open). | | 32 | Running metre |
|---|
| 20 | 20 | MS 150mm long ordinary rat tail rod pattern spring incl roller and plate complete all as specified | | 8 | Each |
|---|
| 21 | 21 | Aluminium handles cast type, anodised, 150 mm size complete, all as specified . | | 88 | Each |
|---|
| 22 | 22 | 150mm long Hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws. | | 8 | Each |
|---|
| 23 | 23 | S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified. | | 16 | Each |
|---|
| 24 | 24 | Galvanised mild steel wire cloth 0.56 mm nominal dia of wire of average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staple as specified and directed. | | 43.0912 | Square meter |
|---|
| 25 | 25 | Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; door frame, and similar work conforming to Fe 290 Gde-E-165 all as specified . | | 1000 | Kg |
|---|
| 26 | 26 | MS in bands straps supprt or stays for rainwater, ventilating pipes, incl bolts, if required, hooks (stai), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde-E-165 as specified and directed. | | 350 | Kg |
|---|
| 27 | 27 | Factory made Steel windows made up of box steel section of 16 gauge ms sheet ub outer frame, shutter frame and centre frame with outer side glazed shutter and inner side wire gauged shutter fixed as shwon in drg consisting with two nos pintol hinges 75mm long, two Nos stove enemaled tower bolts 150 mm long and one No steel handle, deovitailed or welded each panels complete with necessary cleats and stopers all as specified as directed. | | 37.485 | Square meter |
|---|
| 28 | 28 | Factory made Steel ventilator made up of box steel section of 16 gauge MS Sheet frame, fixed type suitable to fix half portion wire cloth and half portion glass with suitable MS beading or flat or oil putty complete. | | 4.2525 | Square meter |
|---|
| 29 | 29 | 50 mm thick in Plain cement concrete type C2 ( 1:3:6)( using 20 mm graded aggregate ) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site. | | 105 | Square meter |
|---|
| 30 | 30 | 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in subfloor floors finished rough all as specified. | | 70 | Square meter |
|---|
| 31 | 31 | Glazed ceramic coloured tiles 300x450x 7mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and as specified. | | 230 | Square meter |
|---|
| 32 | 32 | Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified. | | 70 | Square meter |
|---|
| 33 | 33 | Taking down existing roof treatment of any description and any type all as specified and directed by Engr-in-Charge | | 35 | Square meter |
|---|
| 34 | 34 | 15 mm thick cement plaster in cement mortar 1:4 on roof surfaces finished even and smooth without using extra cement, incl mixed with water proofing compound, brushing neat cement slurry with 3.0 kg of cement per Sqm complete all as specified. (Note: Supply only WPC will be measured and paid seperately). | | 35 | Square meter |
|---|
| 35 | 35 | Supply only liquid water proofing compound mixed as per manufracturer's recommendation in mortar. | | 9 | Ltr |
|---|
| 36 | 36 | 40mm thick PCC (1:2:4) using 20mm graded stone agg with mixed WPC Compound complete all as specified and directed by Engineer-in-Charge.(WPC will be paid seperately) | | 35 | Square meter |
|---|
| 37 | 37 | Priming the roof surface with bituminous primer conforming to IS-3384 @ 0.30 ltrs/Sqm and applying a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.20 Kg/Sqm and thereafter provide polymeric water proofing membrane (five layered) of weight not less than 3 Kg/Sqm with centre layer core of 90 micron high molecular density polyethylene film followed by another coat of semi hot blown 85/25 grade bitumen @ 1.20 Kg/Sqm blinded with fine sand in dry condition @ 0.50 Kg/Sqm all as specified (Make of polymeric water proofing membrane : M/s IWL India Ltd/M/s STP Texas Ltd/Bengal Bitumen) | | 35 | Square meter |
|---|
| 38 | 38 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc as specified and directed. | | 1470 | Square meter |
|---|
| 39 | 39 | 10 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and smooth without using extra cement, all as specified . | | 500 | Square meter |
|---|
| 40 | 40 | Preparing new plastered surfaces of walls Applying two coats of OBD/on new plastered surface over a coat of alkali resistant primer of any description of approved tint over new plastered surface as directed. | | 300 | Square meter |
|---|
| 41 | 41 | 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately) | | 600 | Square meter |
|---|
| 42 | 42 | Two coats of cement base paint on newly plastered wall surfaces over a coat of alkali resistant primer including preparation complete all as specified and as directed. | | 550 | Square meter |
|---|
| 43 | 43 | 5mm thick cement plaster on brick or concrete surfaces, as in ceiling / facia / chajja etc. in cement mortar 1:3 finished even and smooth without using extra cement, all as specified . | | 170 | Square meter |
|---|
| 44 | 44 | Preparing new plastered ceiling surfaces applying three coats of white wash complete all as specified. | | 170 | Square meter |
|---|
| 45 | 45 | Preparing new plastered surfaces of walls and applying two coats of weather coat paint as on facia, fins, chajja boarder, columns, drops, parapets, etc. over a coat of painting primer, complete all as specified | | 50 | Square meter |
|---|
| 46 | 46 | Complete removal all exsting old treatment/finishes over old plastered surfaces of walls and applying two coats of cement base paint all as specified and dircted by Engr In Charge | | 550 | Square meter |
|---|
| 47 | 47 | Complete removal all exsting old treatment/finishes over old plastered surfaces of walls and applying two coats of OBD paint all as specified and dircted by Engr In Charge. | | 1225 | Square meter |
|---|
| 48 | 48 | Complete removal of existing treatment on walls complete all as specified and directed. | | 20 | Square meter |
|---|
| 49 | 49 | Preperation of old decorated plastered wall surfaces applying two coats of white wash on wall complete all as specified. | | 150 | Square meter |
|---|
| 50 | 50 | Applying two coats of white wash on new plastered surfaces of wall inclduing preparation all as specified and as directed. | | 200 | Square meter |
|---|
| 51 | 51 | Preperation old decorated plastered surfaces of ceiling surfaces applying three coat of white wash complete all as specified. | | 200 | Square meter |
|---|
| 52 | 52 | Preparation of new steel and iron surfaces of any discription exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, all as specified. | | 200 | Square meter |
|---|
| 53 | 53 | Preparation of old steel and iron surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint, all as specified. | | 40 | Square meter |
|---|
| 54 | 54 | Preparation of old steel and iron surfaces not exceeding 10 cm width or girth and applying one coat of synthetic enamel paint, complete, all as specified. | | 5 | 10 Running Meter |
|---|
| 55 | 55 | Preparation of new wooden or wood based surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, all as specified. | | 35 | Square meter |
|---|
| 56 | 56 | Sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane 3mm thick all as specified | | 37.485 | Square meter |
|---|
| 57 | 57 | All as per item No 56 above but frosted glass. | | 2.12625 | Square meter |
|---|
| 58 | 58 | Taking up or down steel tubing with connections for cleaning for refixing complete of bore 15mm, all as specified . | | 75 | Running metre |
|---|
| 59 | 59 | Taking up or down steel tubing with connections for cleaning for refixing complete of bore 20mm, all as specified . | | 25 | Running metre |
|---|
| 60 | 60 | Taking up or down steel tubing with connections for cleaning for refixing complete of bore 25mm, all as specified . | | 15 | Running metre |
|---|
| 61 | 61 | 15mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings all as specified. | | 50 | Running metre |
|---|
| 62 | 62 | Re-fixing only 15mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings | | 25 | Running metre |
|---|
| 63 | 63 | 20 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings | | 20 | Running metre |
|---|
| 64 | 64 | Re-fixing only 20mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings | | 5 | Running metre |
|---|
| 65 | 65 | 25 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings | | 15 | Running metre |
|---|
| 66 | 66 | S&F in repair 15 mm bore fancy type chromium plated bib taps with wall flange cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and as directed. Make ESS ESS/Jaquar or equivalent . | | 20 | Each |
|---|
| 67 | 67 | S&F in repair 15mm bore CP Pillar tap, fancy type chromium plated with crutch or butterfly handle screwed down high pressure with or without letterd hot or cold with long screed shanks and fly nuts screwed for iron pipe all as specified. | | 4 | Each |
|---|
| 68 | 68 | S & F in repair 15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified and directed Make ESS ESS cat part No -T-112B/Kohler or Equivalent make. | | 16 | Each |
|---|
| 69 | 69 | Corner glass shelf 5mm thick not less than 200 mm(brass brackets) complete all as specified and directed by Engineer -in-charge | | 8 | Each |
|---|
| 70 | 70 | PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality suitable for hot and cold supply complete all as specified. Make Prayag Cat part No BCT-04/Polytuf or equivalent make.\n | | 16 | Each |
|---|
| 71 | 71 | S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed Make : ESS ESS cat part No- RF 202 for shower and Cat Part SA-105 for shower Arms/Kohler or Equalent make. | | 4 | Each |
|---|
| 72 | 72 | S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor. Make Cera Cat Part No Calina S 3010102/Hindware or Equavlent make. | | 12 | Each |
|---|
| 73 | 73 | S&F in repair 600mm x 450 mm beveled edge looking mirror 5.5mm thick of selected quality glass fixed in pvc frame , mounted on 6 mm thick fixed on wall with necessary 5 nos hookds & wooden plugs etc complete all as specified. | | 4 | Each |
|---|
| 74 | 74 | S&F in repair under counter wash basin of size 550x450 mm vitreous China including , waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed. Make cera cat part No - Comet 1016 /Kohler or equalent make. | | 4 | Each |
|---|
| 75 | 75 | Black granite 18-20mm thick of any type work table rubbed and polished for plate form and counter type for wash hand basin 18-20 mm thick machine cut and polished of approved colour ( Black zet with Granite polish) incl setting and jointing in neat cement slurry and pointed in coloured cement to match the services of marble counter granite etc complete.\n | | 4 | Square meter |
|---|
| 76 | 76 | Chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed. Make ESS ESS Cat Part No -ACN 703 /Kohler or Equivqlent make complete all as specified. | | 8 | Each |
|---|
| 77 | 77 | S&F in repair (Plastic Polymer Cistern) valve less, with top button double action type flushing cistern of capacity 10 ltrs , low level white inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type incl provision of 32mm PVC flush pipe of required length and making connections complete incl taking down old one by dismantling the existing unserviceable cistern of any description Make: Prayag Cat Part No 504/ parryware or equivalent. | | 12 | Each |
|---|
| 78 | 78 | S&F in repair Waste coupling, 32mm dia, of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified. | | 4 | Each |
|---|
| 79 | 79 | S&F in repair Waste coupling, 40mm dia, of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified. | | 4 | Each |
|---|
| 80 | 80 | PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm diameter of outlet, all as specified. | | 16 | Each |
|---|
| 81 | 81 | Dismantling of cast iron pipes including all fittings and accessories, 100/75 mm dia and in any position all as specified. | | 29.2 | Running metre |
|---|
| 82 | 82 | PVC(SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips complete all as specified.\n | | 10 | Running metre |
|---|
| 83 | 83 | PVC(SWR) pipes, 110 mm external dia double socketed in any length with rubber joints, fixed to walls or laid in trenches with PVC brackets/clips complete all as specified.\n | | 19.2 | Running metre |
|---|
| 84 | 84 | PVC(SWR) bends suitable for 110 mm external dia complete all as specified\n | | 12 | Each |
|---|
| 85 | 85 | S&F PVC(SWR) bends suitable for 75 mm external dia complete all as specified\n | | 4 | Each |
|---|
| 86 | 86 | PVC (SWR) junction single, (single T) equal or unequal of 110mm dia as specified. | | 5 | Each |
|---|
| 87 | 87 | PVC (SWR) junction single, (single T) equal or unequal of 75mm dia as specified. | | 12 | Each |
|---|
| 88 | 88 | PVC (SWR) vent cowl of 75mm bore as specified. | | 4 | Each |
|---|
| 89 | 89 | PVC (SWR) branch pieces single Y equal or un equal with access door confirming to IS: 14735, suitable for PVC soil waste discharge pipe 110mm size complete as specified. | | 4 | Each |
|---|
| 90 | 90 | Add to items No 85 for 75mm bore pipes for provided with access door all as specified and directed | | 8 | Each |
|---|
| 91 | 91 | Add to items No 84 for 110mm bore pipes for provided with access door all as specified and directed | | 8 | Each |
|---|
| 92 | 92 | Rotational molded polyethylene water storage tanks 3 layer (cylindrical vertical with closed top) hoisted and fixed in position making connection all as specified in SSR Part-I of Capacity 1000 litres all as specified. Make as approved by Engr-in-Charge. | | 6 | Each |
|---|
| 93 | 93 | Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms) | | 6 | Each |
|---|
| 94 | 94 | S&F in 20mm PVC Nipple suitable for HDPE Water tank (Min Wt 15mm-38gms) complete | | 12 | Each |
|---|
| 95 | 95 | S&F in repair PTMT grating round 100 mm size, all as specified. | | 12 | Each |
|---|
| 96 | 96 | S&F in Repair PVC waste pipe 800mm long suitable for 32mm dia waste coupling complete all as specified. | | 8 | Each |
|---|
| 97 | 97 | S&F in repair MS powder coated decorative mild steel curtain rod of 25 mm dia (16 gauge) with brackets both side of finale globe all as specified and directed by Engr-in-charge. | | 80 | Running metre |
|---|
| 98 | 98 | Dismantling of plain, corrugated or semi corrugated sheeting, of any description, roof coverings all as specified. | | 770 | Square meter |
|---|
| 99 | 99 | Painted galvaume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified as directed. | | 720 | Square meter |
|---|
| 100 | 100 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified as directed. | | 50 | Square meter |
|---|
| 101 | 101 | S&F in repair Gun metal globe or gate valveswith iron wheel head screwed both ends for iron pipe and fixed for unions of 20 mm bore and fixed in repairs, all as specified and directed | | 6 | Each |
|---|
| 102 | 102 | S&F in repair Gun metal globe or gate valveswith iron wheel head screwed both ends for iron pipe and fixed for unions of 15 mm bore and fixed in repairs, all as specified and directed | | 6 | Each |
|---|
| 103 | 103 | S&F in repair Gun metal globe or gate valveswith iron wheel head screwed both ends for iron pipe and fixed for unions of 25 mm bore and fixed in repairs, all as specified and directed | | 6 | Each |
|---|
| 104 | 104 | Cutting chases for concealed water tubing or concealed , etc. and making good, cutting exceeding 20cm girth in CM 1:3 complete all as specified. | | 40 | Running metre |
|---|
| 105 | 105 | S&F in repair Stop/Angle valves fancy type, chromium plated with long shank and cup (concealed type) for iron pipe or for unions of bore dia 15mm and fixed, all as specified. | | 24 | Each |
|---|
| 106 | 106 | Plain, Aluminium sheeting, 0.56mm thick Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing fixed to walls and fixed with screws. | | 1.95 | Square meter |
|---|
| 107 | 107 | S&F in Repair vitreous china urinal half stall type suitable size white including all fittings complete. Make :- Prayag Cat Pat No- 4999 | | 4 | Each |
|---|
| 108 | 108 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.00 Kg of cement per sq m all as specified and directed. | | 750 | Square meter |
|---|
| 109 | 109 | Machine cut kota polished stone slab 20-22 mm thick as in floor of over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl screed bed or bedding layer of mortar 20mm thick in cement mortar 1: 4 for laying floor finishes complete. | | 750 | Square meter |
|---|
| 110 | 110 | Machine cut polished Kota stone slab 20-22mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 10 mm thick 1:3 cement mortar all as specified | | 35 | Square meter |
|---|
| 111 | 111 | Dismantling wall and ceiling board (fibre, pulp, insulation etc or insulation boards/slabs/blankets any thickness incl cover fillets as specified and directed. | | 450 | Square meter |
|---|
| 112 | 112 | Non Asbestos cement bldg board 4mm thick fixed to MS frame work with screws as in ceiling specified and directed. | | 400 | Square meter |
|---|
| 113 | 113 | All as per item No 112 above but except board. | | 50 | Square meter |
|---|
| 114 | 114 | Making benching with PCC (1:2:4) type B0 using 12.5 mm graded stone aggregate mixed with WPC along side wall adjoining to roof in concave shape complete all as specified. | | 1 | Cubic Meter |
|---|
| 115 | 115 | Cement concrete type B 2 (1:2:4) 40mm graded agg in mass filling and mass concrete complete all as specified. | | 1 | Cubic Meter |
|---|
| 116 | 116 | Water proofing treatment to floor & vertical surfaces of sunken portion complete comprising the following: -\n(a) After demolition of floor & lime concrete etc. remove all loose particles along with existing water proofing treatment (any no. of layers) with wire brushes and cleaning the surfaces with water. \n(b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound as per manufracture instruction.\n(c) 15 mm thick (Average thickness) plaster in cement mortar (1:3) mixed with WP compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding.\n(d) Filling with PCC 1:7:12 in E-2 bk bats demolished portion of sunken part in cement mortar (1:4) all as specified and directed (e) Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg/ Sq. m and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gm/Sq. m), laid on floor & sides of sunken slab sealing all joints to the entire satisfaction of Engineer-in-Charge. MAKE: LAFARGE, TEXA, STP, BENGAL AQUAFLUX. (Note :- Net Horizontal sunken portion floor area shall be measured for payment and depth of sunken will be 30 to 45 cm from FFL).\n | | 7 | Square meter |
|---|
| 117 | 117 | Post construction antitermite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specified | | 100 | Square meter |
|---|
| 118 | 118 | Post construction antitermite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2(1 cement : 2 coarse sand) to match the existing floors complete all as specified. | | 200 | Square meter |
|---|
| 119 | 119 | Post construction antitermite treatment of voids in masonry using chemical emulsion one litre per hole at 300 mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified. (Note :- Item no. 117 to 119, the contractor shall furnish security deposit and service guarantee for 10 years from date of completion for Antitermite treatment as directed and specified. | | 100 | Square meter |
|---|
| 120 | 120 | Taking down old UNSV/deteriorated batten/PVC conduit point wiring aluminium/copper from existing place i.e. light, fan, socket or power point complete with all UNSV fittings such as switches, sockets, bell push, ceiling rose, pendants, Holders etc and making good all distributed surface to wall, floor etc by means of cement mortar (1:3) or plaster and to match/finish new surface as the existing surface either by using same colour distemper, Putti or white/colour wash all as required and directed by Engr-in-charge. | | 275 | Point |
|---|
| 121 | 121 | M&L for concealed point wiring on wall and ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 sqmm, 1100 volts grade drawn in and including rigid non metallic white/ivory PVC conduit medium grade ISI marked not less than 20 mm dia with all conduit accessories/fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and Bakelite laminated sheet 3mm thick ISI marked for fixing of switches/sockets, fan ragulators, wall mounting fittings, door bell and bulkhead etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 sqmm, 1100 volts grade for continous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matchng/finishing of new surfaces either by means of plaster/Putti or distemper/colour wash with same existing colour surfaces all as specified and directed by Engr-in-Charge for the following :- Make of wire : Finolex/Havells/PolycabPVC conduit. Make :- Plaza/AKG/Havells/Kalinga | | | |
|---|
| 122 | 121.1 | One light/Fan/Bell Point controlled by one switch 6/5 Amp one way single pole. | | 175 | Point |
|---|
| 123 | 121.2 | One 3 pin socket outlet 6/5 Amp controlled by one switch on the same board with other swithces. | | 20 | Point |
|---|
| 124 | 121.3 | One 3 pin socket outlet 6/5 Amp controlled by one switch on tindependent board. | | 40 | Point |
|---|
| 125 | 122 | All as per item No. 121.0 here-in-before but for power point wiring with 2.5 sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 1.50 sqmm PVC-FRLS insulated, unsheather, copper conductor, stranded 1100 volt grade cable as continuous earth lead. Make of wire :- Finolex/Havells/Polycab PVC conduit. Make :- Plaza/AKG/Havells/Kalinga. | | 40 | Point |
|---|
| 126 | 123 | S&F switch piano flush type (ISI marked), single pole, one way 6 Amp, 240 volt complete all as specified and as directed. Make :- Havells/Cona/Legrand. | | 235 | Each |
|---|
| 127 | 124 | S&F switch piano flush type (ISI marked), single pole, one way 16/15 Amp, 240 volt complete all as specified and as directed. Make :- Havells/Cona/Legrand. | | 40 | Each |
|---|
| 128 | 125 | S&F Socket outlet 3 pin, 6 Amp piano flush type complete all as specified and as directed. Make : Havells/Cona/Legrand | | 60 | Each |
|---|
| 129 | 126 | S&F swith socket outlet combination, 2 in 1, 3/5 pin 6/16 Amp piano flush type complete all as specified and as directed. Make : Havells/Cona/Legrand | | 40 | Each |
|---|
| 130 | 127 | S&F ceiling rose, surface bakelte, 65mmx50mm, two to three terminals complete as specified and as directed. Make : Havells/Cona/Legrand. | | 85 | Each |
|---|
| 131 | 128 | S&F for batten angle lamp holder insulated body with back plate suitable for concealed conduit fittings including complete all as specified and as directed. Make : Havells/Cona/Legrand. | | 50 | Each |
|---|
| 132 | 129 | S&F wall mounted LED batten 18/20 Watt with 01 No. LED tube rod, extruded aluminium head sink provided for efficient heat dissipation and integrated electronic dirver complete all as specified and directed Make : Wipro/Crompton/Philips. | | 75 | Each |
|---|
| 133 | 130 | Supply and Fixing medium step type fan regulator 80 Watt, 240 volt AC, socket size medium step (ISI marked) complete all as specified and directed. Make : Havells/Cona/Legrand. | | 6 | Each |
|---|
| 134 | 131 | S&F LED building security light 35 Watt, 230 volt complete with all accessories and including connecting upto ceiling rose with 0.5 sqmm three core copper flexible conductor cable. One GI medium grade suitable size dia bracket of total length 50 cm and fixed to wall with 02 Nos MS Clamp and Fastener including dismentling taking down UNSV fitting any type all as specified and directed. Make : Wipro Cat Part No. LR02-391XXX-57-XX or euivalent in CG/Philips. | | 10 | Each |
|---|
| 135 | 132 | S&F LED lamp 10 Watt CDL B-22 Cap Base Holder, 230 volts. Make :- Wipro/Crompton/Philips. | | 50 | Each |
|---|
| 136 | 133 | Supply and Fixing MCB SPN, 40 Amp 240 volt, AC, 10 KA breaking capacity 'C' series (ISI Marked) and conforming to IS 8828/IEC 60898-1 complete all as specified and directed. Make : Scheider Electric/Legrand/L&T. | | 12 | Each |
|---|
| 137 | 134 | Supply and Fixing MCB SP&N, 06 to 32 Amp 240 volt, AC, 10 KA breaking capacity 'C' series (ISI Marked) and conforming to IS 8828/IEC 60898-1 complete all as specified and directed. Make : Schneider Electric/Legrand/L&T. | | 60 | Each |
|---|
| 138 | 135 | Supply and Fixing in replacement of Kit Kat DB by SP&N distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 8 way, conforming to IS 13031 and 8623 complete all as specified and directed. Make : Schneider Electric/Legrand/L&T. | | 6 | Each |
|---|
| 139 | 136 | Supply and Fixing in replacement of Kit Kat DB by SP&N distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 4 way, conforming to IS 13031 and 8623 complete all as specified and directed. Make : Schneider Electric/Legrand/L&T. | | 6 | Each |
|---|
| 140 | 137 | Supply and Fixing in replacement of Kit Kat DB by TP&N distribution Box Vertical, double door of protection grade IP 43 provision for 04 pole MCCB frame F2+18 modules upto 100 Apm,upto 50 KA breaking capacity as incomer in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 4 way, conforming to IS 13031 and 8623 including chasing/cutting of wall and concealed and making good as existing surface complete all as specified and directed. Make : Schneider Electric/Legrand/L&T. | | 2 | Each |
|---|
| 141 | 138 | Supply and Fixing of MCCB 100 Amps 25 KA with fixed thermal magnetic release frame F2 optim 1.0, 04 pole all as specified and directed. Make : Schneider Electric/Legrand/L&T. | | 2 | Each |
|---|
| 142 | 139 | M&L for sub main wiring with two run of FRLS PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 6.0 sqmm, 1100 volts grade and one run of 4.00 sqnn FRLS PVC insulated unsheathed as earth (In Green Colour), flexible copper conductor (Multistrands) for continous earthing conforming to IS 694 with latest amendments including PVC conduit and drawing in PVC rigid conduit 25 mm dia, connecting incoming/outgoing electric connections by using required size copper lugs/thimbles and making good the disturbed surface to match existing complete in all respect all as specified and directed. Note :- Two run of single core cable with one run of contineous eath wire of copper conductor wire flexible (Multistrand) of FRLS PVC and PVC conduit insulated shall be measured and paid as one unit length. | | 220 | Running metre |
|---|
| 143 | 140 | Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in deep getting out in hard/dense soil for stay assembly/laying of cable/errection of poles etc complete all as specified and directed. | | 27 | Cubic Meter |
|---|
| 144 | 141 | Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick all as specified and directed. | | 18.5 | Cubic Meter |
|---|
| 145 | 142 | Removing of excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point as specified and directed. | | 8.5 | Cubic Meter |
|---|
| 146 | 143 | M&L for dry Ganga River Sand cushioning in trenches for protection of cable including gently punning down all as specified and directed. Note :- Punned thickness shall be considered for measurement purpose. | | 8 | Cubic Meter |
|---|
| 147 | 144 | M&L fo well brunt brick sub class B old size laying in trenches prependicular to axis of the cable complete all as specified and directed. | | 0.8 | Per 1000 Nos |
|---|
| 148 | 145 | Supply and laying in trenches/Floor or fixed to Pole/Wall GI pipe light grade with fitting of size 40 mm bore for protection of cable including dismantling existing pipe complete all as specified and directed by the Engr-in-Charge. | | 6 | Running metre |
|---|
| 149 | 146 | Material and Labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galavanised steel wire or tape and overall PVC sheather 25 sqmm 3.5 core with required aluminium cable lugs all as specified and directed including dismentaling and taking down of existing UNSV cable. Make of Cable : Havells/Polycab/Gloster/Finolex | | 150 | Running metre |
|---|
| 150 | 147 | M&L for earthing as per IS-3043 with glavanised steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to galvanised iron wire 4mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15mm bore for protectin of GI earth wire and 20mm dia GI pipe medium grade for watering with alternate layers of charcoal/coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonary finished chamber of internal size 300mm x 300mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters complete all as specified as shown in eletrical plate No. 3 of SSR Part-I and testing of earth resistance as required. Note : Earthing lead/GI Earth wire upto 7.5 meter length shall be deemed to be included in quoted unit rate beyond 7.5 meter, the same shall be measured and paid separately. | | 2 | Each Set |
|---|
