Miscellaneous Works At Office Building Of Odisha State Office In Bhubaneswar

Tender Notice

26110644
Miscellaneous Works At Office Building Of Odisha State Office In Bhubaneswar
Indian
Orissa
27-11-2020
05-12-2020
07-12-2020

Tender Details

Miscellaneous Works At Office Building Of Odisha State Office In Bhubaneswar

Key Value

Document Fees
Refer document
EMD
INR 26000.00 /-
Tender Value
Refer document

BOQ Items

NAME OF WORK: Miscellaneous Works at office building of Odisha State Office in Bhubaneswar
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Fire Pump House 1
2 2 Demolishing brick work manually/mechanical means including stacking of serviceable material & disposal of unserviceable material outside premises at an unobjectionable place as / direction of Engg-in-charge MPLCN00300 1 M3
3 3 Dismantling roofing including ridges, hips valleys & gutters, False ceiling of any type and stacking the material within premises, of: MPLCN007XX
4 4 i) G.S. Sheet/ Klippon galvalume sheet/ False ceiling panels MPLCN00701 25 M2
5 5 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth MPLCN00800
6 6 iii) Brick work in Cement mortar 1:4 (1 cement: 4 coarse sand) in superstructure in all shapes & sizes in superstructure ABOVE PLINTH & UP TO FLOOR V LEVEL MPLCN01900 4 M3
7 7 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish at desired place or outside the premises as desired as per direction of Engineer in charge. MPLCN020XX
8 8 i) With cement mortar 1:4(1 Cement : 4 fine sand) MPLCN02001 40 M2
9 9 Providing & laying water proofing treatment in sunken portion of WCs, bathroom etc. by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment & sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. MPLCN027XX 500 M2
10 10 Providing and laying cement plaster on surfaces with fine sand including curing etc. MPLCN02706
11 11 i) 12 mm cement plaster of mix1:4(1 cement: 4 fine sand) MPLCN029XX 35 M2
12 12 Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins,rafters & trusses & including cutting to size & shape wherever required:- 1.00mm thick G.S. Sheet with zinc coating not less than 275gm/m² MPLCN02901 20 M2
13 13 Distempering with 1st quality acrylic washable distemper (ready mixed) having VOC content less than 50gm/ltr of approved manufacturer, of required shade and colour complete as per manufacturer's specification with 2 or more coats MPLCN036XX 330 M2
14 14 Finishing walls with water proofing cement paint of required shade with Two or more coats applied @ 3.84 kg/10 sqm MPLCN03602 165 M2
15 15 Applying one coat of cement primer of approved brand and manufacture on wall surface : MPLCN037XX 495 M2
16 16 Taking out existing CC interlocking paver blocks from footpath central verge, including removal of rubbish etc., disposal of unserviceable material out of site at unobjectionable place & stacking serviceable material within 50 metre lead as per direction of Engineer - in-Charge MPLCN03702 100 M2
17 17 Laying Corporation supplied interlocking paver blocks of any design /shape laid in required line,level,curvature,colour & pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as/ direction of Engineer-in-charge. MPLCN041XX 100 M2
18 18 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed. MPLCN04104
19 19 i) All kinds of Soil MPLCN04105 50 M3
20 20 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidation each deposited layer by ramming and watering, within premises and lift upto 1.5m MPLCN043XX 30 M3
21 21 CEILING FANS Supply & fixing of ceiling fan for inside of the sales building of following type: MPLCN04302
22 22 1200 mm sweep MPLCN051XX 2 EA
23 23 Providing & installing turbo air ventilator on shaft having followingspecifications : ventilator dia - 28#, throat (Neck) dia. - 21# and 36Aluminum fins of 0.5 mm thickness, M.O.C. complete stainless steel 304with fins & rivets of aluminum. These are supported on FRP base withprofile matching to Zinc Aluminum shaft. The thickness of FRP shaftsshall be 1.8 to 2 mm and length 1800, width shall be 0.6 to 0.8 meter(to match with galvalume sheet) and color milky white, semi-transparenttype MPLCN05113 2 EA
24 24 Leakage at Basement Entry
25 25 Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :
26 26 iii)1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) 15 M3
27 27 vi) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 40mm) 40 M3
28 28 25mm Thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing wax polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 165 M2
29 29 Re-fixing IOC supplied Klippon Galvalume / Zincalume , 0.50mm bare & 0.58 mm TCT or equivalent steel roofing system of approved make 10 M2
30 30 Providing and laying cement plaster on surfaces with fine sand including curing etc.
31 31 vi) 20mm Cement plaster of mix1:6 (1 cement: 6 fine sand) 35 M2
32 32 Distempering with 1st quality acrylic washable distemper (ready mixed)of approved manufacturer& of required shade and colour complete as per manufacturer's specification with 2 or more coats 95 M2
33 33 Applying one coat of cement primer of approved brand and manufacture on wall surface : 95 M2
34 34 Electric Panel Room
35 35 Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: 500 KG
36 36 Providing & fixing IS:12817 marked stainless steel butt hinges (heavy weight) 100x60x2.50 mm with stainless steel screws etc. complete : 4 EA
37 37 Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 1 EA
38 38 Providing & fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868 )transparent or dyed to required colour or shade with necessary screws etc. complete :
39 39 i) 250x10 mm 2 EA
40 40 Providing & fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
41 41 i) 125 mm 2 EA
42 42 Supplying, fabricating and installing following sizes of perforated GI cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling and/or fix to steel/RCC columns, beams or any other structure members with MS suspenders, angles, channels, etc complete as per the direction of Indian Oil
43 43 S/F/I Perforated GI trays of 600mm x 25mm x 2mm with bends, tees, cross members etc. as per specifications and direction of Engineer in charge 5 M
44 44 Disconnecting, dismantling the existing pipeline both above/ Underground including excavating, breaking the enclosure walls, back filling & restoring the surface in original condition, disconnecting all the fittings, valves, strainers, filters, adjustable supports and all other fittings either by gas-cutting or hacksaw cutting after gas the lines, dismantling BM pedestals if required and stacking the dismantled pipes and fittings at site as directed
45 45 Dismantling and stacking 100 mm dia - AG P/L 5 M
46 46 Supply, fabrication, laying and testing of MS, BLACK, ERW, threaded pipes, heavy class conforming to IS 1239, PART I as per IOCL Specifications including pipeline fittings like bends, tee etc as required and as directed for Above Ground pipeline including painting 2 coats of red oxide zinc phosphate primer and 2 coats of Synthetic enamel / aluminium finish paint as per IOCL specifications
47 47 S/L Threaded A/G HD MS Pipes of 100 mm dia with fittings,Painting 5 M
48 48 Emergency Stair Case
49 49 Dismantling Steel work in build up sections in angles, tees, flats channels etc. including all gusset plates, bolts nuts, cutting rivets welding etc. including dismembering and stacking within premises 1500 KG
50 50 Fabrication & Erection of IOC supplied structural steel work riveted, bolted or welded in single/ built up sections,trusses & framed work hoisting, fixing in position and applying a priming coat of approved steel primer all including cutting, complete 1500 KG
51 51 Steel work in built up tubular trusses including cutting,hoisting fixing in position & applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete.
52 52 i) Hot finished welded type tubes. 125 KG
53 53 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 40 M2
54 54 Other Painting Works
55 55 Finishing walls with water proofing cement paint of required shade with Two or more coats applied @ 3.84 kg/10 sqm 600 M2
56 56 Applying one coat of cement primer of approved brand and manufacture on wall surface : 600 M2
57 57 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 250 M2
58 58 Miscelleneous Works
59 59 Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.
60 60 i) Powder coated minimum thickness 50micron aluminium 24 EA
61 61 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per direction of Engineer in Charge complete UP to 5mm depth and 5mm width 250 M
62 62 Providing and fixing 150 mm wide Chicken Wire mesh between junctions of column/beam and walls, fixed with U nails 150 mm centre to centre before plastering the junction. 300 M2
63 63 Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters,sills,facias,Pump Island & similar locations of required size of shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement mixed with matching pigment,epoxy touch ups, including rubbing,curing moulding & polishing to edge to give high gloss finish etc. complete at all levels.
64 64 iii) Granite of any colour and shade having Area of slab upto 0.50 sqm 3 M2
65 65 Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters,sills,facias,Pump Island & similar locations of required size of shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement mixed with matching pigment,epoxy touch ups, including rubbing,curing moulding & polishing to edge to give high gloss finish etc. complete at all levels.
66 66 i) Raj Nagar Plain white marble or Udaipur green marble or Zebra black marble or Cuddapa stone having Area of slab upto 0.50 sqm 5 M2
67 67 Providing & Fixing 15mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture spintone/cosmos / Hexa or equivalent of size 595 x 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minimum) sheet, spaced 1200mm centre to centre, and cross "T" of size 24x28mm made out of 0.33mm (Minimum) sheet, 1200mm long spaced between main'T' at 600mm centre to centre to form a grid of 1200x600mm and secondary cross 'T' of length 600mm and size 24 x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600mm panel to from grid of size 600x600mm resting on periphery walls / partitions on Perimeter wall angle pre- coated steel of size(24x24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick densified edges calcium silicate ceiling tiles of approved texture (Spintone/Cosmos/hexa) in the grid including,cutting/ making opening for services like diffusers, grills,light fittings, fixtures, smoke detectors etc., wherever required, Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm ceiling with 12.5 mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanised steel level clips of size 85x30x0.8 mm spaced at 1200mm centre to centre along main'T', bottom exposed with 24mm of all T-sections shall be pre-painted with polyester baked paint for all heights,as per specifications,drawings & as directed by engineer-in- charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames /opening (cut outs) having area less than 0.30 sqm.The calcium silicate tile shall have NRC value of 0.50(Minimum), light reflection > 85%, non - combustible as per B.S. 476 part IV, 100% humidity resistance & also having thermal conductivity<0.043 w/m 0 KC 50 M2
68 68 Providing & fixing at all height FALSE CEILING including providing & fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating 120gsm as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax50mm long with 6mm dia bolts to the angle hangers of 25x10x0.5mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section & perimeter channels 0.5mm thick 27mm high having flanges of 20mm & 30mm long, the perimeter of ceiling fixed to wall partition with the help of rawl plugs at 450mm centre to centre with 25 mm long drive-all screws @ 230mm interval including jointing & fixing to a flush finish of tapered & square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification & also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing & specification and direction of the Engineer in Charge but excluding the cost of painting with:
69 69 i) 12.5 mm thick tapered edge fire resistant GYPSUM BOARD CONFORMING TO IS: 2095- PART-I 50 M2
70 70 Dismantling roofing including ridges, hips valleys & gutters, False ceiling of any type and stacking the material within premises, of:
71 71 i) G.S. Sheet/ Klippon galvalume sheet/ False ceiling panels 110 M2
72 72 Waterproofing with Epoxy Chemical on existing Tile Area after proper cutting, cleaning of the Tile joints 1100 M2
73 73 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
74 74 iii) RCC 1 Cement :2 Coarse Sand: 4 Graded Stone Aggregate 20mm 12 M3
75 75 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels
76 76 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 1200 KG
77 77 Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete.
78 78 i) Local Fine Sand within grading zone IV 20 M3
79 79 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items
80 80 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS 100 M
81 81 v) 4 Core x 2.5 sq. mm Copper Cable FRLS 200 M
82 82 xv) 4 Core x 25 sq. mm Aluminium Cable FRLS 200 M
83 83 Laying, glanding, ferruling, termination of CAT 6 Ethernet armoured cable as per tender specifications and instructions of Engineer in charge 180 M
84 84 Providing following point wiring with standard wire/ cable, plug, fittings, with suitable sockets, suitable GI box with front plate etc. complete, to include circuits from distribution boards to individual point boards, suitable PVC casing capping and required accessories pulling of wires, etc. complete.
85 85 i) Supplying and drawing following 2 pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 90 M
86 86 Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following :
87 87 i) 50 x 10mm G.I. Strip 250 M
88 88 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes.
89 89 ii) 110 mm diameter 50 M
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail