Special Repair To Bldg No T-964 And T-962 , Provision Of Toilet Block At Bldg No T-771 With 1Xurinal And 1Xwhb With Water Connection , Provision Of Tiling To Bldg No T-810 , Provision Of Soaking Pit Near Bldg No T-94 And Certain Rev And Minor Work At L, Leimakhong-Manipur

TDR : 26105113

Tender Notice
Corrigendum Details
BOQ

Expired

Leimakhong , Manipur

Tender Brief : Corrigendum : Special Repair To Bldg No T-964 And T-962 , Provision Of Toilet Block At Bldg No T-771 With 1Xurinal And 1Xwhb With Water Connection , Provision Of Tiling To Bldg No T-810 , Provision Of Soaking Pit Near Bldg No T-94 And Certain Rev And Minor Work At L

Document Fees
₹ 500 /-

EMD
₹ 51000.0 /-

Tender Value
₹ 25.50 Lakhs /-

Submission Date
17-12-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	10-12-2020	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	17-12-2020

Name of Work: SPL REP TO BLDG NO T-964 AND T-962 , PROVN OF TOILET BLOCK AT BLDG NO T-771 WITH 1XURINAL AND 1XWHB WITH WATER CONNECTION,PROVN OF TILING TO BLDG NO T-810,PROVN OF SOAKING PIT NEAR BLDG NO T-94 AND CERTAIN REV AND MINOR WORK AT LEIMAKHONG MIL STN.
	Sl.No.	Item Description	Item Code / Make	Quantity	Units
1	1	B/R work
2	2	Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed.		20	SQM
3	3	Excavation over areas not exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed.		9	CUM
4	4	Ditto all as per item no 3 above but exc 1.5m deep and not exc 3m . complete all as specified and directed.		26.2	CUM
5	5	Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.		13.22	CUM
6	6	Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils complete all as specified and as directed.		8.88	CUM
7	7	Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.		39.53	CUM
8	8	M & L for loose filling of Aggregate gauge 80 to 150 mm in soakage pits and soakage well complete all as specified and directed.		3	CUM
9	9	M&L for Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.		5.79	CUM
10	10	M & L for PCC M-10 grade, (Nominal mix) (using 40mm graded stone aggregate), as in foundation, filling and mass concrete complete all as specified and as directed.		3.19	CUM
11	11	M&L for PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in surface channel and drains complete all as specified and directed.		0.45	CUM
12	12	M&L for PCC M-15 grade (Nominal mix) using 20mm graded crushed stone aggregate in coping complete all as specified and directed.		0.1	CUM
13	13	M & L for precast cement concrete M15 grade (nominal mix) using 20mm graded stone aggegate set in cement mortar(1:4) in landing, cover slabs (for manholes etc) Chajjas, shelves and simillar articles with plain faces.complete all as specified and directed.		0.25	CUM
14	14	M&L for RCC M-15 grade(Nominal Mix) type B1 using 20 mm graded aggregate in slab supported on walls,beams and columns etc complete all as specified and directed. ( Note- Form work and reinforcement will be measured and paid separately.)		1.9	CUM
15	15	Supply of Integral water proofing Compound ISI marked.		19	KG
16	16	M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed.		25.75	CUM
17	17	M & L for brick work with sub class ‘B’ brick, old size (locally available best quality) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed.		65.35	SQM
18	18	Material and labour for brick work with sub class “B’ bricks in one brick thick in honey comb walling in cement mortar (1:4) complete all as specified and directed.		39	SQM
19	19	S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 25 x25 x0.35mm and main/cross tee of size 24 x38 x0.70mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed.		260	SQM
20	20	Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n exc 200mm thick (horizontal or sloping) rough finished surface of concrete complete all as specified and directed.		16.04	SQM
21	21	M & L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finised surface of concrete complete all as specified and directed		1.5	SQM
22	22	Use and waste of formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide, fair finished complete all as specified and directed		14	RM
23	23	S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.		0.2	CUM
24	24	M&L for 35mm thick well seasoned 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass etc. (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred bead for securing gauge etc size of members of shutter as specified in SSR Part-I section 8 clause 8.24(a) complete all as specified and directed.		20	SQM
25	25	S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.		3.6	SQM
26	26	Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc. 4 sqm each and removing all unserviceable materials from site complete all as specified and directed.		8	EACH
27	27	Taking down shutters of any description exc. 1 sqm and not exc. 2 sqm each and removing all unserviceable materials from site complete all as specified and directed.		6	EACH
28	28	S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.		12.6	SQM
29	29	S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.		39.8	RM
30	30	S&F 150mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.		24	EACH
31	31	S&F 100mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.		24	EACH
32	32	S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed.		4	EACH
33	33	S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.		36	EACH
34	34	S&F 75mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.		48	EACH
35	35	S&F 150mm long alumiunium handles cast type anodised complete all as specified and directed.		12	EACH
36	36	S&F 125 mm long alumiunium handles cast type anodised complete all as specified and directed.		6	EACH
37	37	S&F 100mm long alumiunium handles cast type anodised complete all as specified and directed.		24	EACH
38	38	S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width or aperture 1.18mm complete all as specified and directed.		6	SQM
39	39	M & L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.		176	KG
40	40	M & L TMT mild steel bars 6mm to 8 mm dia and over ,cut to length,bend to shape required, including cranking ,bending spirally for hooping for columns,hooking ends and binding with the including mild steel wire(annealed) not less than 0.9mm dia or securing with clips.complete all as specified and directed.		20	KG
41	41	S&F structural steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed.		635	KG
42	42	S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'J' type cranked hook bolt and washer in roof, wall etc. with grade of zinc coating 275 complete all as specified and directed.		149	SQM
43	43	S&F 0.80mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip, wall cladding and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.		10	SQM
44	44	M & L for 4mm thick plywood (no of ply 03), grade BWR, type BB, fixed with nails to timber frame work in walls complete all as specified and directed.		110	SQM
45	45	M&L for 75mm thick PCC M-10 grade (Nominal mix) using 40mm graded stone aggregate as in plinth protection finishing surfaces even and smooth without using extra cement complete all as specified and directed.		146	SQM
46	46	M&L 100mm thick PCC M-7.5 grade (Nominal Mix) using 40mm graded crushed stone aggregate in sub base, finishes even and fair complete all as specified and directed.		68.1	SQM
47	47	M&L 25mm thick plain cement concrete M15 grade (Nominal mix) using 20mm graded crushed stone aggregateas in floor, finishes even and fair to receive floor tiles complete all as specified and directed.		335.5	SQM
48	48	S&F Glazed ceramic tiles in vertical surface 300x 200x 7 mm/ thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backing in CM (1:4) complete all as specified and directed.		61	SQM
49	49	S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backing in CM (1:4) complete all as specified and directed.		14	SQM
50	50	M&L coloured non-skid joint free ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.		91.75	SQM
51	51	M&L coloured non-skid joint free ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.		29.6	SQM
52	52	M&L coloured non-skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.		212.5	SQM
53	53	Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed.		19	SQM
54	54	M&L for precast cement concrete chequred tiles (ISI approved) of size 300mm x300mm x25mm thick, set and jointed and pointed in neat cement slurry in floor with grey cement and pigment all as specified and directed.		76.5	SQM
55	55	M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick,set, jointed and pointed in neat cement slurry with grey cement and pigment in floors to match complete all as specified and directed.		49	SQM
56	56	M&L for rendering 15mm thick on fair faces of brick work in cement mortar (1:4) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified & directed.(Using Dimapur Sand)\n[Note: WPC will be measured and paid separately)\n		101	SQM
57	57	M & L for rendering 15mm thick plaster in cement mortar (1:4) on other than fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand)		88	SQM
58	58	M & L for rendering 15mm thick plaster in cement mortar (1:4) on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand)		15	SQM
59	59	M & L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles etc complete all as specified and directed.		333.85	SQM
60	60	M & L for 20mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles etc complete all as specified and directed.		76.5	SQM
61	61	M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed.		65	SQM
62	62	M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of whitewash complete all as specified and directed.		76	SQM
63	63	S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed.		2	SQM
64	64	M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.		52	SQM
65	65	M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed.		25	SQM
66	66	M&L for prepraration of new or untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.		75	SQM
67	67	M&L for preparation of new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc and applying two coats synthetic (red) roof paint over a coat of red oxide primer complete all as specified and directed.		169	SQM
68	68	S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.		65	RM
69	69	S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.		25	RM
70	70	Taking up or down 20mm dia of steel tubing and connections and removal from site complete all as specified and directed.		25	RM
71	71	S & F bore bib taps(ISI marked) , cast copper alloy, chromium plated fancy type , screwed down, screwed for iron pipe for 15 mm bore or for brass ferule complete all as specified and directed.		10	EACH
72	72	S&F in repair stop valves(ISI marked) cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) for 15mm bore pipe complete all as specified and directed.		7	EACH
73	73	S&F in repair angle valves(ISI marked) cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) for 15mm bore pipe complete all as specified and directed.		8	EACH
74	74	S&F grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.		1	EACH
75	75	S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.		2	EACH
76	76	M&L PVC SWR pipe dia 110mm single socketed in any leanth with rubber ring joints, laid in trenches or floors.		8	RM
77	77	S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in rain water pipe complete all as specified and directed.		31	RM
78	78	S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in rain water pipe complete all as specified and directed.		5	RM
79	79	S&F 110mm bore PVC (SWR) bends complete all as specified and directed.		6	EACH
80	80	S&F 75mm bore PVC (SWR) bends complete all as specified and directed.		2	EACH
81	81	S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.		3	EACH
82	82	S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.		2	EACH
83	83	M&L for PVC (SWR) vent cowl of bore 110mm complete all as specified and directed.(Make : KISHAN/ SUPREME /PRINCE /ANANT /ORIPLAST)		2	EACH
84	84	M & L for concrete bed to drain pipes 100mm including packing under ,and haunching against the sides of pipes after they are laid and tested in cement concrete( 1:3:6) type C2 complete all as specified and directed.		5	RM
85	85	S&F in repair vitreous china squatting pan “Orissa pattern of size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed.\n\n		5	EACH
86	86	S&F in repairs PVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe 600mm long 15mm bore with brass heads and washers all as specified and directed.		5	EACH
87	87	S&F in repair vitreous China urinals, half stall type, white with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.		1	EACH
88	88	S & F in repair wash basin, vitreous china (flat back or angle back type), white, 450 x 300 mm size, white, including brackets, waste fittings, waste coupling, 32mm dia, waste pipe, complete all as specified and directed.		1	EACH
89	89	S&F soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed.		1	EACH
90	90	Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed.		9.9	CUM
91	91	Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed.		30.61	CUM
92	92	Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.		200	SQM
93	93	Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.		5.5	QTL
94	94	Dismantling of galvanised plain/ corrugated including Nainital or similar pattern mild steel sheeting of any gauge, thickness roof coverings and segregating serviceable sheet and stacking for reuse and removing unserviceable materials from site of work complete all as specified and directed.		150	SQM
95	95	E/M work
96	96	Taking down carefully unserviceable aluminum/ copper point wiring (light/ fan/ socket/ power) complete including fixture & fitting such as switches, sockets, ceiling roses regulators, lamp holder etc. but excluding light fittings & fixture and exhaust fans etc removing and making good disturbed surfaces of wall/ceiling etc complete all as specified and directed.		63	POINT
97	97	Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed)
98	97.01	One light/fan point controlled by one, one way switch		37	POINT
99	97.02	One socket outlet 5 Amps 5 pin on independent board		26	POINT
100	97.03	One socket outlet 5 Amps 5 pin on same board with other switches		2	POINT
101	98	All as per item No. 97 here in before but with cable size 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm size for one 5 pin 15 Amps socket out let on independent board complete all as specified and directed.		4	POINT
102	99	S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed.		67	EACH
103	100	S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed.		28	EACH
104	101	S&F modular socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module complete all as specified and directed.		2	EACH
105	102	S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.		40	EACH
106	103	S&F modular switch piano, 16 Amps, single pole, one way complete all as specified and directed.		4	EACH
107	104	S&F modular white cover with frame for fixing of 12 module.		2	EACH
108	105	S&F modular white cover with frame for fixing of 6 module.		25	EACH
109	106	S&F modular white cover with frame for fixing of 4 module.		4	EACH
110	107	S&F modular white cover with frame for fixing of 3 module.		7	EACH
111	108	S&F modular white cover with frame for fixing of 1 module.		4	EACH
112	109	S&F blank spacer plate for single module.		13	EACH
113	110	S&F modular electronic fan regulator rotary stepped type 120W, 240V, single phase, two module and connecting up complete all as specified and directed.		4	EACH
114	111	Taking down old unserviceable main switch/ DBs/ MCB DBs with MCB including making good the disturbed surface complete as directed.		2	EACH
115	112	S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.\n(Make: Havells cat part No. DHDPSHODRW 08 or as per list approved makes enclosed hereinafter)		1	EACH
116	113	S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 4 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.\n(Make: Havells cat part No. DHDPSHODRW 04 or as per list approved makes enclosed hereinafter)		4	EACH
117	114	S&F MCB single pole and neutral 20 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.		2	EACH
118	115	S&F MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.		2	EACH
119	116	S&F MCB single pole 06 to 32Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.		10	EACH
120	117	S&F PVC Board (30 x 25 x 5) cm depth medium quality ISI marked complete all as directed.		4	EACH
121	118	S&F basic all purpose surface & wall mounted LED batten with polycarbonate housing & integrated electronic driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. \n(Make: Havells Lumiline Cat No.LUMILINEBS20WLED865SPCWH or equivalent in Philips/ Bajaj/ Crompton)		25	EACH
122	119	S&F LED light fittings 2 ft 9 w (900lm) basic all purpose surface & wall mounted LED batten with polycarbonate housing & integrated electronic driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. \n(Make: Philips Astra line Cat No.94051090 or equivalent in Philips/ Bajaj/ Crompton)		4	EACH
123	120	Taking down old unserviceable service cable including batten/suspending wires complete all as directed.		92	RM
124	121	S&F Service wire PVC insulated and PVC sheathed stranded Aluminium conductor 10 sq mm 2 Core fixed to walls or suspended by insulating hanger not more than one meter apart including 4mm dia GI suspension wire and binding with 2mm dia new GI wire with reel insulator complete all as directed.		147	RM
125	122	Taking down ceiling/exhaust fan including dismantling all necessary electrical connections to facilitate repairs to ceiling/wall complete all as directed.		7	EACH
126	123	Hanging only/ Refixing ceiling/exhaust fan removed under item Srl No 128 above and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed.		7	EACH
127	124	S&F building security light fitting new generation energy saving & environmental friendly long life versatile pressure die cast aluminium IP-66 high power LED light 20 watt including suitable size of wall bracket and connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. \n(Make: Havells Endura Pearl Cat No. ENDURAPEARLSL20WLED757SASYTOPC or equivalent in Bajaj/Philips/Crompton)		1	EACH
128	125	Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed. (Note: Earth strip beyond 7.5 m length will be measured & paid separately)		3	EACH SET

Also Visit

Tenders

Manipur Tenders

Construction Tenders

Building Construction Tenders

Building Repair Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Special Repair To Bldg No T-964 And T-962 , Provision Of Toilet Block At Bldg No T-771 With 1Xurinal And 1Xwhb With Water Connection , Provision Of Tiling To Bldg No T-810 , Provision Of Soaking Pit Near Bldg No T-94 And Certain Rev And Minor Work At L, Leimakhong-Manipur

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Special Repair To Bldg No T-964 And T-962 , Provision Of Toilet Block At Bldg No T-771 With 1Xurinal And 1Xwhb With Water Connection , Provision Of Tiling To Bldg No T-810 , Provision Of Soaking Pit Near Bldg No T-94 And Certain Rev And Minor Work At L, Leimakhong-Manipur

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us