Construction Of Sub Health Center Building At Hamir Nagar , Block Luni , Distt . Jodhpur, Hamir Nagar, Block Luni, Jodhpur-Rajasthan

TDR : 26103732

Tender Notice
BOQ

Expired

Hamir Nagar, Block Luni, Jodhpur , Rajasthan

Tender Brief : Construction Of Sub Health Center Building At Hamir Nagar , Block Luni , Distt . Jodhpur

Document Fees
₹ 500 /-

EMD
₹ 58000.0 /-

Tender Value
Refer document

Submission Date
07-12-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Construction of Sub Health Center Building at Hamir Nagar, Block Luni, District Jodhpur
1	1	( Based on BSR Civil Works 13 July 2018 ,PWD Circle, Jodhpur) SHC Building (Part A :- Civil Work) Earth work in surface excavation not exceeding 30 Cm. In depth but exceeding 1.5 meter in width as well as 10 Sam. on plan including disposal of excavated earth up to 50 Mtr. And lift up to 1.5 Mtr. Disposed soil to be leveled and neatly dressed : All kinds of soil.	BI01010001010000000000000515BI0100001113	200.664	Sqm
2	2	Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils	BI01010001010000000000000515BI0100001114	186.879	Cum
3	3	Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth , consolidating each deposited layer by ramming and watering including lead upto 50Mtr. and lift upto 1.5Mtr.	BI01010001010000000000000515BI0100001115	105.427	Cum
4	4	Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth level 1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size (Crusher Broken)	BI01010001010000000000000515BI0100001116	57.2602	Cum
5	5	Providing and laying in position specified grade of reinforced cement concrete including curing compaction finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. All work up to plinth level : 1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size)	BI01010001010000000000000515BI0100001117	6.86275	Cum
6	6	Reinforced cement concrete work in beams, suspended floors, roofs, girders having slopes up to 15o , landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases, up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good and joints excluding the cost of centering, shuttering and reinforcement: 1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size).	BI01010001010000000000000515BI0100001118	25.1169	Cum
7	7	Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns , etc. up to plinth level.	BI01010001010000000000000515BI0100001119	28.6364	Sqm
8	8	Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members and removal of formwork for superstructure up to 4.5 mtr above plinth, for: (a) Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands , coping, bed plates, anchor blocks, sills, chhajjas lintel, beam etc.	BI01010001010000000000000515BI0100001120	182.926	Sqm
9	9	Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. Tremo Mechanically treated bars	BI01010001010000000000000515BI0100001121	3197.96	Kg.
10	10	Half brick masonry in foundation & plinth using bricks of designation 75 with nominal hoop rainforsed (2 Nos. 6mm MS bar) at every fourth course in for hoop rainforcement 1Sqm. 6mm MS bar 2x2x1.00 = 4.00 Cement mortar 1:4 (1-Cement:4-coarse sand). Add extra over item No. 5.8 for half brick masonary in superstructure up to third story.	BI01010001010000000000000515BI0100001122	42.7108	Sqm
11	11	Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall in : Cement Mortar 1:6 (1-Cement:6-Sand).	BI01010001010000000000000515BI0100001123	164.177	Cum
12	12	Random Rubble stone masonary for superstructure above plinth level one storey height above 30 Cm. thick walls in : Cement Mortar 1:6 (1-Cement:6-Sand).	BI01010001010000000000000515BI0100001124	110.25	Cum
13	13	Wall up to 30 Cm. and less thickness.	BI01010001010000000000000515BI0100001125	110.25	Cum
14	14	Extra for facing as per design and detailed specifications including additional cost of stones over item No. 6.1 & 6.2 for : Course rubble facing Second Sort.	BI01010001010000000000000515BI0100001126	734.998	Sqm
15	15	Supplying and fixing machine cut and polished stone shelves, tands and sills in CM 1:3 with machine cut edges: Kota stone 25 to 30 mm thick.	BI01010001010000000000000515BI0100001127	24.8972	Sqm
16	16	Supplying and fixing Jodhpur Bhura or Equivalent ashlar sills, lintels and dassa, bearing, bed & top surface made perfenctly even, jambs, skirting steps etc. rough dressed: Upto 15 cm. thick White Ashlar	BI01010001010000000000000515BI0100001128	0.7358	Cum
17	17	Providing and fixing Granite stone slab mirror polished and machine edge cut in Walls, Pillars, Steps, Shelves, Sills, Counters. Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with pigment to match the shade of the marble slab complete including grinding, rubbing and polishing of: Jhunjhunu / Jalore (Red / Choclate Colour) 801 to 1500 Cm2	BI01010001010000000000000515BI0100001129	5.2024	Sqm
18	18	Providing and fixing Ist quality standard White Ivory Glazed Tiles ISI marked [IS:13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). (A) Category-I : Kajariya, Jhonson, Orient, Somani make etc.	BI01010001010000000000000515BI0100001130	54.7181	Sqm
19	19	Providing and fixing Ist quality MAT finished ceremic tile size 300x300mm confirming to IS : 13753 colour such as white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slsurry including nicely finished joints using water proof joint filler power (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). Add extra over item No. 7.3, 7.4, & 7.5 for floor work due to extra cost of cement mortar 1:4 (1-Cement:4- fine sand) 20 mm thick.	BI01010001010000000000000515BI0100001131	10.5674	Sqm
20	20	Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal, dehydreresin in glue both sides with approved steel fittings complete as per Annexure ‘A’ Commercial Veneer both side. 30 mm thick shutter	BI01010001010000000000000515BI0100001132	22.05	Sqm
21	21	Add extra for Flush doors For Internal teak wood lipping in 25mm depth in single leaf.	BI01010001010000000000000515BI0100001133	12.6	Sqm
22	22	Providing and 30mm thick Rajshri or eq. Brand Factory made Solid Panel PVC Door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm for stiles & 15mmx15mm for top and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded \"Rajshri\" PVC 'C' Channel of size 30x50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side, & 10mm (5mmx2) thick, 20mm wide cross PVC sheets as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. Frame welded/sealed to the stiles & rail with 30mm wide x 5mm thick PVC sheet beading on either side and joined together with solvent cement adhesive. An additional 5mm thick PVC strip o f 20mm width is to be stuck on the interior side of 'C' Channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing (For W.C. & Bathroom shutters).	BI01010001010000000000000515BI0100001134	11.34	Sqm
23	23	Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design.	BI01010001010000000000000515BI0100001135	45.1	Mtr.
24	24	Providing and laying 20 to 25 mm size glazed tiles pieces for rooof treatment having colour and shade as approved by the Engineer incharge over 25 mm thick layer of cement mortar mix 1:4 with application of cement slurry including finishing of joints with ordinary cement and curing etc. complete in all respect. Washing with acid.	BI01010001010000000000000515BI0100001136	121.699	Sqm
25	25	Cement concrete flooring grade 1:2:4 (1-Cement:2-Coarse sand:4-graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete : 50 mm thick with 20 mm thick nominal size aggregate.	BI01010001010000000000000515BI0100001137	38.3398	Sqm
26	26	Cement concrete flooring grade 1:2:4 (1-Cement:2-Coarse sand:4-graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete : 75 mm thick with 20 mm thick nominal size aggregate.	BI01010001010000000000000515BI0100001138	23.0624	Sqm
27	27	Providing and laying Chequerred plain cement concrete embossed specially manufactured non-slipping tiles of approved make 20 mm thick laid on 20 mm thick bed of cement mortar 1:6 jointed with neat cement slurry complete.	BI01010001010000000000000515BI0100001139	41.9676	Sqm
28	28	Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : For area of each slab up to 901 to 2000 Sq. Cm : (B) 30 mm thick slab.	BI01010001010000000000000515BI0100001140	8.09391	Sqm
29	29	Polished Blue Kota Stone slab in steps, walls, pillars having fine machine cut edges laid on 12mm (Av.) thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete : 25 mm thick slab area upto 901 to 2000 Sq.Cm.	BI01010001010000000000000515BI0100001141	4.41739	Sqm
30	30	Providing & laying vitrified Porcelain dianomite floor tile, skirting, dedo, (Johnson, Euro, Naveen, Bell or equivalent etc.) size 600x600, 10 mm thick flooring over 20 mm thick bed mortar 1:4 mix with 2-3 mm thick joint to be filled with cementious grout or polymer based non shrink grout make Rofee/ Bell adhesive/ pidite etc of matching colour as per requirement of site.	BI01010001010000000000000515BI0100001142	115.446	Sqm
31	31	Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20 mm thick.	BI01010001010000000000000515BI0100001143	480.665	Sqm
32	32	Pointing on stone masonary in cement sand mortar 1:3 (1-Cement:3-Sand) : Sunk or weather struck pointing	BI01010001010000000000000515BI0100001144	438.116	Sqm
33	33	Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.	BI01010001010000000000000515BI0100001145	82.92	Sqm
34	34	Grading roof water proofing treatment with : Cement concrete 1:2:4 (1-Cement:2-coarse sand :4-graded stone aggregate 20mm nominal size).	BI01010001010000000000000515BI0100001146	9.45178	Cum
35	35	Painting with weather coat paint (Asin paint/ I.C.I./Berger or eq. ISI make paint) two or more coat to give an even shade on new work.	BI01010001010000000000000515BI0100001147	496.643	Sqm
36	36	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer.	BI01010001010000000000000515BI0100001148	526.306	Sqm
37	37	Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.	BI01010001010000000000000515BI0100001149	250	Kg.
38	38	Add extra for Flush doors For Internal teak wood lipping in 25 mm depth in Double leaf.	BI01010001010000000000000515BI0100001150	9.45	Sqm
39	39	Add extra for Flush doors For double leaf shutter	BI01010001010000000000000515BI0100001151	9.45	Sqm
40	40	Providing and fixing pressed steel mitred door frames manufactured from commercial mild steel sheet of 1.25 mm (16 gauge) thickness including hinges jamb, lock jamb, head and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. Profile 'C'	BI01010001010000000000000515BI0100001152	88.1	Mtr.
41	41	6mm cement plaster to ceiling of mix 1:3 (1 Cement : 3 fine sand)	BI01010001010000000000000515BI0100001153	174.193	Sqm
42	42	Stone slab roofing on ground for with fine grained stone slab from approved quarry with 150 mm top lime terracing without Hemp, Methi, Lime, Sandla with Gur & Gugal (as per JODHPUR PRACTICE) including ralthal, filling of joints of parapet and slab on both sides in cement sand mortar 1:4 lime batta (gola) 75mmx75mm Sandla and ceiling plaster in CM 1:4 with wire and nails etc. complete as per specification for span. Above 2.50 mtr upto 3.30 metre.	BI01010001010000000000000515BI0100001154	14.144	Sqm
43	43	Plaster on new surface on walls in cement sand mortar 1:4 including raking of joints etc. complete fine finish: 25 mm thick.	BI01010001010000000000000515BI0100001155	39.4825	Sqm
44	44	Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete	BI01010001010000000000000515BI0100001156	526.306	Sqm
45	45	Supply & fixing of steel window made out 100x40 mm hollow metal pressed section of 16 gauge thick sheet partly openable and partly fixed panel shutter with 5 mm thick plain glass panes outside openable and wire gauge 14x24 gauge inside openable shutter with M.S. square bar 10 mm side, fixed, portion of window should be glazed by 5 mm thick plain glass of TG welded to M.S. frame and approved make putty with glazing clips inching joints mitred and plug welded with suitable hinges hold fast steel lug and screws with approved oxidized steel handles fittings peg stays etc. complete in all respect including providing 10 mm square MS bars 15 cm. center to cernter and applying priming coat of red oxide paints as per approved drawing by Engineer's incharge ground floor/ first floor. Size of Window 5'-6\"x6' = 33.00 Sqft. or 3.07 Sqm. Hollow metal pressed section (75x40 mm) of 16 gauge.	BI01010001010000000000000515BI0100001157	24.435	Sqm
46	46	Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20x10x2mm and brackets with flat iron diagonals 20x5mm, size with top and bottom rail of T-iron 40x40x6mm, with 40 mm dia steel pulleys / ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). With 100 mm opening when closed.	BI01010001010000000000000515BI0100001158	7.02	Sqm
47	47	SHC Building (Part B :- Sanitary Work) P & F Indian type white glazed vitreous china Ist quality W.C. orissa pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor : Size Size 580x440 mm.	BI01010001010000000000000515BI0100001159	1	Nos.
48	48	P & F European type white glazed vitreous china Ist quality W.C. pan (IS:2556 Mark) with P or S trap including cutting and making good the wall and floor.	BI01010001010000000000000515BI0100001160	2	Nos.
49	49	P & F water closet Seat Covers with brass hinges complete IS 2548-1996: Solid PVC (ISI marked) grade-I White for EWC.	BI01010001010000000000000515BI0100001161	2	Nos.
50	50	P & F Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : PVC with PVC bend as per IS : 7231	BI01010001010000000000000515BI0100001162	3	Nos.
51	51	P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall : Size 550mm x 400mm	BI01010001010000000000000515BI0100001163	3	Nos.
52	52	P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall : Size 550 mm x 400 mm dia for counter top.	BI01010001010000000000000515BI0100001164	1	Nos
53	53	P & F kitchen & Lab Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up to floor level complete including cutting and making good the wall & floor IS-771 (Part-II) 1985 : 1.0mm thick salem stainless steel AISI -304 kitchen sink of approved make (Nirali, Neel- Kanth, Jaina, Faber, Cryistal) with large waste coupling. Size Size 24x18x8	BI01010001010000000000000515BI0100001165	3	Nos.
54	54	P&F looking mirrors with PVC frame of approved (atul/equivalent) Size 500x400mm	BI01010001010000000000000515BI0100001166	3	Nos.
55	55	P&F towel rail or ring of approved quality /make: C.P. brass towel rail with bracket 450 x20mm.	BI01010001010000000000000515BI0100001167	5	Nos.
56	56	P&F Grating of approved quality/ make Heavy quality of approved make 125mm	BI01010001010000000000000515BI0100001168	4	Nos
57	57	P&F Soap dish or tray of approved quality/ make. C.P. brass heavy and superior quality	BI01010001010000000000000515BI0100001169	4	Nos
58	58	P&F Shower arm 15mm dia of approved quality/ make. C.P. brass heavy & superior quality 220mm projection.	BI01010001010000000000000515BI0100001170	2	Nos
59	59	P&F Bath shower of approved quality/ make. C.P. brass of heavy & superior quality 150mm.	BI01010001010000000000000515BI0100001171	2	Nos
60	60	P&F extension pipe for bib cocks of approved quality/ make: C.P. brass of Heavy & superior quality 50x15mm	BI01010001010000000000000515BI0100001172	3	Nos
61	61	P&F Jet spray for water closet with C.P. copper tube flange of approved make	BI01010001010000000000000515BI0100001173	2	Nos
62	62	Providing and fiixng C.P. flange for 15mm dia tap.s	BI01010001010000000000000515BI0100001174	30	Nos
63	63	P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors : B Class (A) Exposed on wall (i) 15 mm dia nominal bore.	BI01010001010000000000000515BI0100001175	30	Mtr.
64	64	(ii) 25 mm dia nominal bore.	BI01010001010000000000000515BI0100001176	6	Mtr.
65	65	P & F G.I. Pipes (External work) with G.I. fittings (IS:1239 Mark) including trenching & refilling earth etc. \"B\" Class a) 15mm dia nominal bore.	BI01010001010000000000000515BI0100001177	40	Mtr.
66	66	b) 25 mm dia nominal bore.	BI01010001010000000000000515BI0100001178	10	Mtr.
67	67	P & F Bib Cock (IS:8931 Mark) Superior quality of approved make : (a) C.P. Brass bib cock 15 mm nominal bore.	BI01010001010000000000000515BI0100001179	3	Nos
68	68	--do-- (b) Long body, 15 mm nominal bore weight not less than 690 gm.	BI01010001010000000000000515BI0100001180	4	Nos
69	69	P & F Stop cock (IS:8931 Mark) superior quality & of approved make : -do- Concealed Stop Cock 15 mm.	BI01010001010000000000000515BI0100001181	2	Nos
70	70	P & F Sink Cocks of superior quality & approved made: C.P. Sink cock swinging spout 15 mm.	BI01010001010000000000000515BI0100001182	6	Nos
71	71	P & F Ball Cock (IS:1703 Mark) with Rod & P.V.C. Ball complete : Brass wt. 400 gm, 15 mm.	BI01010001010000000000000515BI0100001183	1	Nos
72	72	P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15 mm Brass (IS:8931 marked).	BI01010001010000000000000515BI0100001184	15	Nos
73	73	P & F 15 mm. Dia Connection pipe of approved quality/make: PVC pipe with C.P. Brass nuts up to length 450 mm.	BI01010001010000000000000515BI0100001185	13	Nos
74	74	P & F Full-way valve (IS:778 Mark) or wheel valve of approved make : Gun-metal a) 15mm nominal bore	BI01010001010000000000000515BI0100001186	2	Nos
75	75	b) 25mm nominal bore	BI01010001010000000000000515BI0100001187	1	Nos
76	76	P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design. a) 1000 Litres Capacity	BI01010001010000000000000515BI0100001188	1	Nos.
77	77	Hoisting Charges for each floor : 1000 litres capacity.	BI01010001010000000000000515BI0100001189	1	Nos
78	78	Providing Laying & jointing glazed S.W. pipes grade `A` (IS;651 marked) of approved make with spun yarn & stiff mixture of cement mortar 1.1 excavation & refilling of earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc, complete. 150mm dia	BI01010001010000000000000515BI0100001190	20	Mtr.
79	79	Providing & Laying C.C. 1:5:10 (Stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including 150 mm thick bed concrete as per Rajasthan P.W.D. specifications (Width W=Dia of pipe in Cm+40Cm.) concrete width to be reduced from width W at center of pipe to '0' at top of pipe (Excluding cost of pipe). 150mm dia S.W. Pipe.	BI01010001010000000000000515BI0100001191	18	Mtr.
80	80	P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: (a) 110mm dia	BI01010001010000000000000515BI0100001192	20	Mtr.
81	81	P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 87.5 (110mm dia)	BI01010001010000000000000515BI0100001193	5	Nos
82	82	Door Bend (top side) (110mm dia)	BI01010001010000000000000515BI0100001194	5	Nos
83	83	b) Pipe Clip (110mm dia)	BI01010001010000000000000515BI0100001195	10	Nos
84	84	Construction of manhole in all type of soil inner size 90 X 60 Cm. thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring,making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C.flooring , 25 Kg. CI cover with frame of 40mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth upto 0.5mtr	BI01010001010000000000000515BI0100001196	2	Nos
85	85	Construction of chamber in all type of soil with 300 mm thick masonry in Cm 1:6 m 100mm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside size 450x 450mm depth upto 0.5m & 15Kg C.I. cover with frame	BI01010001010000000000000515BI0100001197	5	Nos
86	86	Construction of soakage well in all type of soil 300 mm thick dry masonry top and bottom 300 mm course in CM 1:6, 80 mm thick stone slab, jointing of slab in CM 1:3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring, earth work complete as per approved drawing including disposal of earth within a lead of 50 mtr. : Size 300 Cm. dia outside & 300 Cm. depth.	BI01010001010000000000000515BI0100001198	1	Nos
87	87	Construction of septic tank in all type sof soil with 40cm thick masonry in CM 1:6 15cm thick CC bed of 1:5:10 M-15 grade CC flooring & over stone slab covering, 80mm thick slab jointing of slab in CM 1:3, Ralthal, Kharanja, 50mm thick stone partiton walls, 20mm thick plaster in CM 1:6 finished with neat floating cement, 4Nos C.I. foot rests of approved design, two No. 450mm dia 25Kg each C.I. cover with frame, earth work etc. complete as per approed drawing incl. disposal of surplus earth wtihin a lead of 50mtr. Size 200x100x130cm (for 10users)	BI01010001010000000000000515BI0100001199	1	Nos
88	88	Construction of Cement concrete chamber 125mm dia. CP Brass grating	BI01010001010000000000000515BI0100001200	4	Nos
89	89	Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. 75mm dia	BI01010001010000000000000515BI0100001201	12	Mtr.
90	90	--do-- 110mm dia	BI01010001010000000000000515BI0100001202	20	Mtr.
91	91	Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. Nahni Trap with Jali 4\" 110mm dia	BI01010001010000000000000515BI0100001203	7	Nos
92	92	--do-- Pipe Clip 110mm dia	BI01010001010000000000000515BI0100001204	9	Nos
93	93	--do-- Vent Cowel 110mm dia	BI01010001010000000000000515BI0100001205	3	Nos
94	94	--do-- Single Tee with door 110mm dia	BI01010001010000000000000515BI0100001206	3	Nos
95	95	--do-- Bend 87.5 Dg. 110mm dia	BI01010001010000000000000515BI0100001207	3	Nos
96	96	--do-- Bend 87.5 Dg. 75mm dia	BI01010001010000000000000515BI0100001208	6	Nos
97	97	--do-- Door Bend 87.5Dg. 75mm dia	BI01010001010000000000000515BI0100001209	6	Nos
98	98	--do-- Door Bend 87.5Dg. 110mm dia	BI01010001010000000000000515BI0100001210	3	Nos
99	99	SHC Building (Part C :- Electrical Work) (BSR 2013 Electrical Rajasthan) Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required. GrpI Short point (up to 3 mtr.)	BI01010001010000000000000515BI0100001211	15	P. point
100	100	Medium point (up to 6 mtr.)	BI01010001010000000000000515BI0100001212	20	P. point
101	101	Long point (up to 10 mtr.)	BI01010001010000000000000515BI0100001213	25	P. point
102	102	Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required.GRPI On board	BI01010001010000000000000515BI0100001214	15	P. point
103	103	Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required.Gr-1	BI01010001010000000000000515BI0100001215	12	Each
104	104	Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.G1 2 x 2.5 sq. mm. + 1x1.5sqmm	BI01010001010000000000000515BI0100001216	220	Mtr.
105	105	2 x 4.0 sq. mm. + 1 x 2.5 sq. mm.	BI01010001010000000000000515BI0100001217	180	Mtr.
106	106	2 x 6.0 sq. mm. + 1 x 2.5 sq. mm.	BI01010001010000000000000515BI0100001218	30	Mtr.
107	107	P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. Grp.I double door (Single phase ) 16 Way	BI01010001010000000000000515BI0100001219	4	Each
108	108	P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.GROUP I Single pole MCB 6 A to 32 A rating	BI01010001010000000000000515BI0100001220	16	Each
109	109	Double pole MCB 40 A 63 A rating	BI01010001010000000000000515BI0100001221	1	Each
110	110	S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required.GROUP 1 25 mm	BI01010001010000000000000515BI0100001222	250	R. mtr.
111	111	40 mm	BI01010001010000000000000515BI0100001223	20	R. mtr.
112	112	Making of hole in wall of required size for housing exhaust fan and making good the same, with cement plaster as required of following size: Up to 457 mm size	BI01010001010000000000000515BI0100001224	5	Each
113	113	P & F 1.6 mm thick M.S. Recessed fan box, hexagonal/ round of size 100 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side .	BI01010001010000000000000515BI0100001225	11	Each
114	114	P&F of Heavy duty capacitor start 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required.GROUP 1 300 mm sweep(900/1400 RPM)	BI01010001010000000000000515BI0100001226	2	Each
115	115	P&F of Gravity Louver shutter of superior quality made out of 18 S.W.G.M.S. sheet and Louvers made from 24 swg MS sheet with enamel paint including cost of nuts, bolts, etc as reqd. Up to 380 mm size	BI01010001010000000000000515BI0100001227	5	Each
116	116	P & F of IP20 LED tube light 20 W with external batten made from CRCA sheet steel housing suitable to replace T-8 / T12 tubelight, integral driver 2000 lumans , + /- 5% tolarance system lumans efficacy of 100 im / watt minium expected life time of 25000 burning hours CCT 5700K, ANSI ,CRI 80 ,driver efficiancy > 85 % . Life expectancy of driver min 30000 hrs, PF 0.95 at full load 230 volt AC. GRP I (Non-integrated Chhanel+ Ret.Tube fixture)	BI01010001010000000000000515BI0100001228	12	Each
117	117	P & F 1200 mm sweep BEE 5 star rated double ball bearing capacitor start, aluminium body & blade ceiling fan complying to 1S :374 I/P 50 watt at max speed and 230 Volt ,air delivery >210 CMM , speed > 330 RPM with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required.GRP I\n	BI01010001010000000000000515BI0100001229	11	Each
118	118	P&F of Double ball bearing, capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required. G1 300 mm sweep	BI01010001010000000000000515BI0100001230	3	Each
119	119	P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.GRPI 10.0 Sq.mm x 2 core ( armoured )	BI01010001010000000000000515BI0100001231	60	Mtr.
120	120	Maintenance free Gel Earthing with Pipe in pipe / Pipe in strip technology filled with anti corrosive conductive compound ( CPRI Tested ) below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineral filling compound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone ) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes.GRPI With Pipe in Pipe Technology (Inner pipe dia. / Outer pipe dia. ) 80 - 100 micron GI Coating GI pipe 2000 mm long, 50 / 25mm, Terminal 12 mm GI Strip	BI01010001010000000000000515BI0100001232	1	Each
121	121	S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 8 SWG G.I. ( Hot Dipped ) Wire	BI01010001010000000000000515BI0100001233	20	Mtr.
122	122	P & F IP 65 protected LED Street Light fixture 70-75 watt (with surge protection device 10 KA ) applicable for area lighting with extruded pressure diecast aluminium housing,system lumens efficacy of 100 lm / watt minium , toughened glass withdiffuser , suitable lenses on LED ,240 V , 50 Hz of High Power LED lamps supplied with pre wired cable of 1 mtr , intregated Driver shaa be high efficiency having efficiency > 85 % and in compliance to IEC standerds System life of 50000 Burning Hours , CRI >80,PF >0.90 at full load , CCT 5700 -6500 K (as per direction of Engineer Incharge ) Fixture shall be CE compliance .GRPI	BI01010001010000000000000515BI0100001234	2	Each
123	123	S & F of Street light bracket made out from following size of ' B ' class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required. 40 mm Dia.	BI01010001010000000000000515BI0100001235	2	Mtr.
124	124	P & F of IP20 LED Recessed / Surface Mounted, Round / Sqaure Non-Dimmable Downlight with die-cast aluminum housing & Heat Sink for heat dissipation, high purity reflector with external BIS certified 2.5 KV surge protected driver having efficiency > 85% and in compliance to IEC standards. System Lumen efficacy of = 100 lm / watt and life time of minimum 35000 Burning Hours with 70% of intial Lumen maintaned, CCT 3000°K / 4000°K / 6000°K , maximum power consumption should not more than the specified rating and Fixture shall be of CE compliance.GROUP 1 Surface mounting LED Downlight 18/20W	BI01010001010000000000000515BI0100001236	6	Each
125	125	P & F ISI marked ding dong/musical chime bell including making connection testing etc. as required.	BI01010001010000000000000515BI0100001237	2	Each
126	126	P&F metal clad industrial plug top & socket unit with pin and sleeve type contact on porcelain/ bakelite base in sheet steel enclosure (without MCB) including making connections with lugs, testing etc.as required. G1 Single / Double Pole (Three pin) 20 A	BI01010001010000000000000515BI0100001238	2	Each
127	127	P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required GRPI 6 A one way switch	BI01010001010000000000000515BI0100001239	8	Each
128	128	6 A 3 pin shuttered socket	BI01010001010000000000000515BI0100001240	8	Each
129	129	Blanking plate	BI01010001010000000000000515BI0100001241	10	Each
130	130	5 step fan regulator 2 Module	BI01010001010000000000000515BI0100001242	11	Each
131	131	SITC of Air Cooled split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (EP foam pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 4 Mtr (IDU to ODU), R-22/R-410 Refrigerant, Remote, suitable for 400/230V +10% of 50 Hz ,1 /3 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / reciprocating / rotary compressor as specified.GRPII Hi Wall/Ceiling Wall Split 1.5 TR with 3 star rating of BEE	BI01010001010000000000000515BI0100001243	1	Each
132	132	Supply, Fixing and testing of following capacity wall mounted stablisers having output voltage variation from 200 V to 250 V(+/-5%) with input voltage variation from 170 V to 260 V, time delay facility from 2 to 4 minute and high cutoff at 270 V with providing of 16 Amp plug top making connection etc complete in all respect GRPII 4 kVA	BI01010001010000000000000515BI0100001244	1	Each
133	133	P & F of 4 star rated vertical storage water heater with outer casing made of M.S.sheet finished with anti-corrosive powder coating,inner tank made of pure electrolytic copper/stainless steel / SPHP, Tubular copper sheathed and Nickel plated heating element/ twin ceremic cartridge heating element, stem type thermostat and thermal cut out,Dual indicating lamps for power supply and thermostat,PUF insulation, Pressure relase valve,fusible plug etc. as required held in position with 4 no. rack bolts,duly wired with 3 core 2.5/4.0 Sqmm PVC insulated & sheathed copper conductor and 16 A/25A three pin plug top,including making inlet,outlet heavy gauge C.P./ Flexible alloy connection,testing etc. as required.GRPI 15 Ltr.	BI01010001010000000000000515BI0100001245	1	Each
134	134	SITC of ISI mark( IS:8472) self priming monoblock pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 1440/1500 RPM, single phase(180 to 240 V). Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively. 1.0/ 1.1 HP, 1-Ø, (10-50)Mtr, (53-6.5)LPM	BI01010001010000000000000515BI0100001246	1	Each
135	135	Making hole in stone masonary/ RCC with core cutter for accomodating refrigerant pipe/ drain pipe for split/ cassattee/ ductable AC 50mm to 150mm	BI01010001010000000000000515BI0100001247	1	Each
136	136	Supply & fixing MS powder coated stand suitable for 1.0/1.5/ 2.0 Tr outdoor type of Split AC.	BI01010001010000000000000515BI0100001248	1	Each

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Rajasthan Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Sub Health Center Building At Hamir Nagar , Block Luni , Distt . Jodhpur, Hamir Nagar, Block Luni, Jodhpur-Rajasthan

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Sub Health Center Building At Hamir Nagar , Block Luni , Distt . Jodhpur, Hamir Nagar, Block Luni, Jodhpur-Rajasthan

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us