| 1 | 1 | Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering, complete all as specified and directed. (235+272) | 1 | 507 | SQM |
|---|
| 2 | 2 | Dismantling boarding, any description, fixed in any position with nails, complete as directed. | 2 | 105 | SQM |
|---|
| 3 | 3 | Dismantling of wooden scantling under 40 Sqm and over in section fixed in any position as in framed work, complete all as specified and as directed. | 3 | 175 | RM |
|---|
| 4 | 4 | M & L GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.90 mm thick having equal flanges of 15 mm each and web of 45 mm suspended from soffit at appox 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (n.exc 1.2 m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel at 457 mm centre to centre, complete all a specified and as directed. | 4 | 115 | SQM |
|---|
| 5 | 5 | M & L hangers 4mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long and expansion hold fasteners 12.5mm dia, 40 mm long, complete all as specified and as directed. | 5 | 115 | SQM |
|---|
| 6 | 6 | M & L 12 mm seamless calcium silicate ceiling made out of 1800x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillip head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound (Frame work) for ceiling and surface finishes shall be measured and paid separately. | 6 | 115 | SQM |
|---|
| 7 | 7 | Dismantling structural steel work including doors, gates, purlins, rafters but excluding framed truss etc., complete all as specified and as directed. | 7 | 5 | PER QTL |
|---|
| 8 | 8 | M & L rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding door; fixed with angles cleats or other connecting plates conforming to Fe 410-W (grade E-250), complete all a specified and as directed. | 8 | 525 | KG |
|---|
| 9 | 9 | M & L mild screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and he hexagonal or square nut n.exc 10 cm long dia of bolt 16-20 mm, complete all as specified and as directed. | 9 | 25 | KG |
|---|
| 10 | 10 | S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws or J hooks, complete all as specified and directed. (250+263) | 10 | 513 | SQM |
|---|
| 11 | 11 | S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof ridge, fixed with self tapping screws or J hooks, complete all as specified and directed.(25+9) | 11 | 34 | SQM |
|---|
| 12 | 12 | Taking down cement plaster of any description and in any position including raking out joints, hacking for key scrubbing down with water etc and removing of debris from site, complete all as directed. (150+30+12+3) | 12 | 195 | SQM |
|---|
| 13 | 13 | M & L for rendering 15mm thick in CM (1:4) finishing surface even and smooth without using extra cement, on external surfaces of brick work or concrete surfaces, complete all as specified and as directed. (75+38+40) | 13 | 153 | SQM |
|---|
| 14 | 14 | M & L for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished even and smooth (without using extra or cement), complete all as specified and directed. | 14 | 75 | SQM |
|---|
| 15 | 15 | M & L for preparation of new surfaces on wall of any description using sand paper and applying two coats of cement base paint(white or tinted), over a coat of cement base primer, complete all as specified and as directed. | 15 | 75 | SQM |
|---|
| 16 | 16 | M & L for completely removal of existing treatment of old wall and applying two coat of cement base paint on wall over a coat of cement base primer, complete all as specified and as directed. | 16 | 275 | SQM |
|---|
| 17 | 17 | M & L for new plastered wall surfaces applying one or more coat of wall care putty to make the entire surface free from undulations, complete all as specified and directed. | 17 | 75 | SQM |
|---|
| 18 | 18 | M & L for completely removal of existing treatment of old wall and applying two coat of wall care putty on wall surface including preparation of surfaces to making the surface even and smooth to receive finishes, complete all as specified and as directed. | 18 | 350 | SQM |
|---|
| 19 | 19 | M & L for preparation of new wall putty finish surfaces and applying two coat of oil bound distermper over a coat of alkali resistant primer, complete all as specified and as directed. | 19 | 425 | SQM |
|---|
| 20 | 20 | M & L for preparation of old surfaces of walls including washing, rubbing down and stopping of distempered surfaces and applying one coat of distemter oil emulsion on an old decorated surface of wall, complete all as specified and as directed. | 20 | 50 | SQM |
|---|
| 21 | 21 | M & L for preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and directed. (21+40) | 21 | 61 | SQM |
|---|
| 22 | 22 | M & L for preparation of old steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed. | 22 | 60 | SQM |
|---|
| 23 | 23 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exc 15 cm thickness (above or below ground level), complete all as specified and directed | 23 | 3.25 | CUM |
|---|
| 24 | 24 | Demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed (6+2) | 24 | 8 | CUM |
|---|
| 25 | 25 | M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed. (5+2) | 25 | 7 | CUM |
|---|
| 26 | 26 | All as per item No. 25 but except bricks, using old unserviceable brick. | 26 | 1 | CUM |
|---|
| 27 | 27 | M & L for PCC type B1(1:2:4) using 20mm graded aggregate as in hold fast, bed block, base of truss, complete all as specified and as directed. | 27 | 1 | CUM |
|---|
| 28 | 28 | M & L for 75 mm thick plain cement concrete (1:3:6) mix, type C-1 using 20mm graded stone aggregate as in plinth protection, finishing the surfaces even and fair including 10 mm wide groove not exc 3.00 m in length, duly filled the groove with mastic, complete all as specified and as directed. | 28 | 45 | SQM |
|---|
| 29 | 29 | Dismantling of roof trusses, purlin, rails, fastening, etc., of steel section, complete all as directed. | 29 | 0.2 | QTL |
|---|
| 30 | 30 | M & L for roof trusses (framed), trussed purlins, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections etc) including distance pieces, cleats etc., and welding counter sunk for holes and necessary gusset plates etc and similar work conforming to Fe-410W (Gde E-250 quality A) complete all as specified and directed by Engr-in-Charge. | 30 | 50 | KG |
|---|
| 31 | 31 | M & L for Mild steel flat (wind tie) as in roof sheet, securing, including distance pieces, cleats etc., complete all as specified and as directed. | 31 | 15 | KG |
|---|
| 32 | 32 | Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) including cover fillet, complete all as specified and directed. | 32 | 100 | SQM |
|---|
| 33 | 33 | M & L for providing aluminium snap grid frame work for false ceiling with size 605x605 mm, using Main and cross tee of size 36.5mm x 25mm x 1.4mm, weighing 0.24 Kg/RM and 23.5mm x 36.4mm x 1.4mm weighing 0.191 Kg/RM respectively. The snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40mm x 25 mm x 2 mm weighing 0.36 Kg/RM. The snap grid shall be fixed to ceiling supporting hangers consisting of 2mm dia mild steel wire/GI wire, J bolts, nuts and washers as per manufacturer's, complete all as specified and as directed. (100+38) | 33 | 138 | SQM |
|---|
| 34 | 34 | M & L for 4mm thick non asbestos fibre designer cement building board fixed or laid/inserted to timber/GI/Aluminium framework with screws, complete all as specified and as directed. (100+38) | 34 | 138 | SQM |
|---|
| 35 | 35 | M & L preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. | 35 | 38 | SQM |
|---|
| 36 | 36 | M & L preparation of old plastered surfaces of walls and applying one coat of white wash complete all as specified and directed. | 36 | 50 | SQM |
|---|
| 37 | 37 | M & L for preparation of old steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. | 37 | 20 | SQM |
|---|
| 38 | 38 | M & L for two coats of wall care putty on surface including preparation of surfaces to making the surface to receive, finishes including scraping of existing treatment, complete all as specified and as directed. Make: JK WALL PUTT OR BIRLA WALL PUTTY. | 38 | 120 | SQM |
|---|
| 39 | 39 | M & L for two coats of oil bound distemper on newly prepared wall putty surfaces, complete all as specified and as directed. | 39 | 120 | SQM |
|---|
| 40 | 40 | M & L painting on old painted wooden based surfaces of any description not otherwise described over 10cm width or girth applying one coat synthetic enamel paint (ordinary tint), any colour, complete all as specified and directed by Engr-In-Charge . | 40 | 10 | SQM |
|---|
| 41 | 41 | Supply and Fix stainless steel sink with drainage board made out of 1.00 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantilever brackets connecting union overall size 915 X 460 mm with bowl size 410 X 330 X 160 mm, complete all as specified and directed. | 41 | 4 | EACH |
|---|
| 42 | 42 | S & F for GI tubing medium grade including all types of fittings of ISI marked fixed to walls and ceiling or laid in floors suitable for 15 mm bore, complete all as specified and as directed. | 42 | 20 | RM |
|---|
| 43 | 43 | S & F for GI tubing medium grade including all types of fittings of ISI marked fixed to walls and ceiling or laid in floors suitable for 20 mm bore, complete all as specified and as directed. | 43 | 70 | RM |
|---|
| 44 | 44 | S & F Gun metal, globe or gate valve 20 mm, with iron wheel head, screwed both ends for iron pipe etc., complete all as specified and as directed. | 44 | 4 | EACH |
|---|
| 45 | 45 | S & F 15 mm bib taps, chromium plated, fancy type long shank with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferrule etc., complete all as specified and as direcetd. | 45 | 4 | EACH |
|---|
| 46 | 46 | S & F vitreous China wash basin, white, flat back, size 550X400mm including brackets for fixing, 32mm waste coupling, waste pipe, chain and plug, porcelain stopper, including cutting and pinning in ends of brackets or erecting stand, including dismantling. etc complete all as specified and directed.Make:- Hindware/Parryware/Cera or of equivalent approved make. | 46 | 4 | EACH |
|---|
| 47 | 47 | S & F 15 mm bore fancy type pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT' or 'COLD’ with long screwed shank and fly nuts, screwed for iron pipe complete all as specified and directed. | 47 | 4 | EACH |
|---|
| 48 | 48 | S & F stop valve 15mm chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed and as directed. | 48 | 4 | EACH |
|---|
| 49 | 49 | M & L looking mirror 600x450 mm selected quality 5mm glass mounted on 6 mm thick plywood fixed to wall by wooden plug with chromium plated brass screw and cup washer, complete all as specified and directed. | 49 | 4 | EACH |
|---|
| 50 | 50 | S & F PVC connection 15 mm size with PTMT nuts of length 450, complete all as specified and as directed. | 50 | 4 | EACH |
|---|
| 51 | 51 | S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges, complete all as specified and as directed. | 51 | 4 | EACH |
|---|
| 52 | 52 | S & F shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed. | 52 | 4 | EACH |
|---|
| 53 | 53 | S & F 32mm dia waste coupling of PTMT (half or full threaded)(Min wt 45 gms), complete all as specified and directed by Engineer-In- Charge. | 53 | 8 | EACH |
|---|
| 54 | 54 | S & F 32 mm bore low density polyethylene(LDPE) pipes of pressure rating 6 kgf/sqcm, complete all as specified and as directed. | 54 | 8 | EACH |
|---|
| 55 | 55 | M & L for 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and as directed. | 55 | 8 | EACH |
|---|
| 56 | 56 | M & L for PVC(SWR) pipes 75 mm bore single socketed in any length with rubber ring joint laid in trenches, complete all as specified and as directed. | 56 | 16 | RM |
|---|
| 57 | 57 | M & L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings ,steps,cills sunshades,shelves, lintel,etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth complete all as specified and directed. | 57 | 15 | RM |
|---|
| 58 | 58 | M & L for glazed ceramic coloured tiles 300x200X 6 mm thick as on vertical surface of wall such as in skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile, including 10mm thick rendering in CM (1:4), complete all as specified and directed. | 58 | 12 | SQM |
|---|
| 59 | 59 | Cutting holes into or through brick walls n.exc 150 Sqcm area built in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete, complete all as specified and as directed. | 59 | 200 | PER CM |
|---|
| 60 | 60 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc., or for shafts, well, cess pits, manholes, pier holes etc., n.exc 10Sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil, complete all as specified and as directed. | 60 | 30 | CUM |
|---|
| 61 | 61 | Removing excavated materials exc 250 m and n.exc 500m and depositing, where directed at a level n.exc 1.5 m above the starting point, complete all as specified and as directed. | 61 | 27 | CUM |
|---|
| 62 | 62 | M & L for brick work with sub class 'B' bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 Kg/Sqcm) old size bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:4), complete all as specified and as directed. | 62 | 7.5 | CUM |
|---|
| 63 | 63 | M & L for plain cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in foundation filling and mass concrete, complete all as specified and directed. | 63 | 2.4 | CUM |
|---|
| 64 | 64 | M & L for plain cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate as in surface channel, drain and coping etc., complete all as specified and directed. | 64 | 0.6 | CUM |
|---|
| 65 | 65 | M & L for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, mitred/stopped ends etc., complete all as specified and as directed. | 65 | 42 | RM |
|---|
| 66 | 66 | M & L for providing precast RCC cover slab for drain, manholes etc., made out of cement concrete 1:2:4 type B1 using 20mm graded aggregate and set in cement mortar 1:6 including all necessary formwork, complete all as specified and directed. | 66 | 2.5 | CUM |
|---|
| 67 | 67 | S & F mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, complete all as specified and directed. | 67 | 175 | KG |
|---|
| 68 | 68 | Supply only integral water proofing compound. | 68 | 5 | KG |
|---|
| 69 | 69 | Returning, filling in trenches including spreading, levelling watering and well ramming in layers n.exc 25 cm thick, complete all as specified and as directed. | 69 | 3 | CUM |
|---|
| 70 | 70 | Roughening surface of old concrete floor by picking, sweeping washing down with water to remove dust etc., and brushing neat cement slurry with 3 Kg of cement per square metre, complete all as specified and as directed. | 70 | 40 | SQM |
|---|
| 71 | 71 | M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular )area of each tile exe.0.11 sqm but n.exe.0.18 sqm, in floor including 15mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed. | 71 | 40 | SQM |
|---|
| 72 | 72 | M & L for cement concrete type B1, 1:2:4 (using 12.5 mm graded aggregate) in levelling courses, coping, window cill etc., complete all as specified and directed. | 72 | 1 | CUM |
|---|
| 73 | 73 | M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular) area of each tile exe.0.11 sqm but n.exe.0.18 sqm, inskirting and dado including 15mm thick rendering bed in cement mortar (1:3) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed. | 73 | 3 | SQM |
|---|
