Military Engineer Services-MES has published Repair To Ac/Cgi Sheet Roof False Ceiling Joinery And Roof Treatment Work In Otm At Mil Stn Agartala. Submission Date for this Tender is 16-12-2020. Shed Construction Tenders in AGARTALA Tripura. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 09-Dec-2020 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-12-2020 |
| NAME OF WORK : REPAIR TO AC/CGI SHEET ROOF, FALSE CEILING JOINERY AND ROOF TREATMENT WORK IN OTM AT MIL STN AGARTALA | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 0.01 | Schedule'A' Part-I: B&R works | |||
| 2 | 1 | M& L for Roughening surfaces of old concrete surfaces by picking sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 Kg/Sqm of cement mixed with liquid type water proofing compound @ 200ml/50Kg of cement, on dry concrete surfaces including 20mm thick screed bed in CM 1:3 and mixed with liquid water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. ( Note: water proofing compound shall be measured and paid separately ) | 300 | Sqm | |
| 3 | 2 | Supply of liquid integral water proofing compound Make : Dr fixit LW+ | 18 | Ltr | |
| 4 | 3 | M&L for water proofing treatment to RCC roof slab incl parapet comprising with the following course of treatment/specifications from bottom to top (a) Applying bituminous primer @100 gms per Sqm over plastered surfaces of roof incl parapet surfaces. ( Make Tank Mastic of STP Ltd or EMUFALTE of Texsa ltd/IWL india Ltd) (b) One layer of APP based polymeric membrane of approved manufacturer , 3mm thick, weight not less than 3.6 Kgs per Sqm, reinforced with non woven polyester fabric of weight not less than 150 gram per Sqm.Polymeric membrane shall taken to a height 60cm(minimum) and then inserted inside the groove of parapet wall and shall be done by torch on method or as per manufacture instructions (ii) A minimum over lap of 100mm and 75mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlap and joints as manufactures instructions.(iii) The make of polymeric membrane shall be SUPER THERMOLY OF STP Ltd or MOPLY FP OF Texsa india Ltd /IWL india Ltd (c) Applying two coat of bituminous aluminium paint on top of APP membrane. | 300 | Sqm | |
| 5 | 4 | Disconnecting existing Exc 500 & N.Exc 1000 ltrs tanks setting aside ( or lowering if required)for repairs, cleaning etc and hoisting if required reconnecting and refixing in position ( Note :cleaning repairing etc measured separately) | 2 | Each | |
| 6 | 5 | Cleaning and removing all scale and dirt etc.from tanks and from mouths of circulating pipes etc , tank size Exc 500 & N.exc 1000 Ltrs capacity all as specified and directed | 2 | Each | |
| 7 | 6 | S&F Rotational moulded polyethylene water storage tanks, 1000 ltrs capacity multilayered construction (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including disconnecting and removal of existing water storage tank complete all a specified and as directed. | 3 | Each | |
| 8 | 7 | Taking down chowkhat with shutters ( without taking off shutters from the frame) removing to store n'exc 1.5sqm each all as directed | 30 | Each | |
| 9 | 8 | All as per item No 7 above but size exc 1.5 sqm but n.exc 4 sqm each all as specified and directed | 10 | Each | |
| 10 | 9 | Taking down shutters of any description Exc 1.00Sqm and N.Exc 2.00 Sqm each all as specified and directed | 8 | Each | |
| 11 | 10 | S&F in repair to Aluminium anodised three track sliding window frames of size 61.85X45.50X1.30mm thick and shutter frames of size 40X 18X 1.29mm with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixing with stainless steel wire staples and fixing 5mm thick tinted glass with necessary rubber beading gasket all as specified and as directed | 12 | Sqm | |
| 12 | 11 | S&F anodised aluminium door air tight frame made of size 100mmX45mm,of sheet thickness 1.5mm with one or more rebate including jointing cleat etc for fixing anodised aluminium door shutter fully panelled ( two nos of panel on each shutter) with 5.5mm thick tinted glass shutter, rail made of 80mmX45mm of sheet thickness 1.5mm ( top,bottom,midle and side rail) single/double leaf side hung type including necessary jointing cleat, anodised aluminium fillet, aluminium glazing clip with rubber gasket with aluminium fitting such as aluminium butt hinges 100mm long 3Nos on each shutter,aluminum anodised handle150mm,2 Nos D type for each shutter and locking 6 lever Make : Harrison one on each door, All door fitting except cleat shall be ISI marked. | 6 | Sqm | |
| 13 | 12 | S& F in repair for aluminium door 6 lever locking system of best quality all as specified and directed | 10 | Each | |
| 14 | 13 | S& F in repair for aluminium door round type glass handle 150mm size all as specified and directed | 10 | Each | |
| 15 | 14 | Taking down and refixing of aluminium door in same position including replacement of defective glazing clip and gasket all as specified and directed | 5 | Each | |
| 16 | 15 | M&L for steel windows with side hung shutters including box type hinges with one Nos of steel Handle, and two Nos of 150mm tower bolts welded to each shutter including 150mm long peg stay per leaf complete with glazing bars properly butt welded all as specified and directed. | 30 | Sqm | |
| 17 | 16 | All as per item No 15 above but without glazing bars | 30 | Sqm | |
| 18 | 17 | S&F Steel ventilator with top hung shutter including hinges,setel handle, steel peg stay complete all specified and directed. | 5 | Sqm | |
| 19 | 18 | S&F framed work such as grills, grating etc with ends of bars shoulders and/or riveted, or forged in spikes: framed guard bars and all as specified and directed. | 240 | Kg | |
| 20 | 19 | S&F for 2nd class hard wood 35mm thick panelled shutters (any number of panels) with panels of timber flat on both sides ( feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers all as specified and directed. | 15 | Sqm | |
| 21 | 20 | S&F M S butt hinges 100mm size medium weight cold rolled all as specified and directed | 24 | Each | |
| 22 | 21 | S&F 200mm aluminium anodized, barrel tower bolt of extruded section and fixed all as specified and directed. | 16 | Each | |
| 23 | 22 | S&F extruded aluminium alloy handles fabricated type anodised 125mm long all as specified and directed. | 16 | Each | |
| 24 | 23 | S&F aluminium alloy, anodised sliding door bolt of size 300mm with hasp,staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy all as specified and directed. | 8 | Each | |
| 25 | 24 | Welding in repairs Exc 2.5cm but Nexc 5cm in length thickness of welding Exc 6mm but Nexc 9mm in all as specified and directed. | 50 | Each | |
| 26 | 25 | S&F box type hinges available best quality for using steel window cutting old any type hinges and welding properly by a new item and all as specified and directed. | 50 | Each | |
| 27 | 26 | S&F Galvanised mild steel wire cloth,0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed | 40 | Sqm | |
| 28 | 27 | S&F in repair Galvanised mild steel wire cloth,0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed | 65 | Sqm | |
| 29 | 28 | Hacking out old broken glass( any thickness,size,quality) or description from wooden. Steel frame all as specified and directed. | 30 | Sqm | |
| 30 | 29 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty/beads in square N.exc 0.5Sqm in each pane all as specified and directed | 25 | Sqm | |
| 31 | 30 | S&F for 4mm thick figured glass, pin head type and glazing with oil putty/beads in squares n exc 0.5sqm in each pane all as specified and directed. | 5 | Sqm | |
| 32 | 31 | M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of wood primer all as specified and directed | 40 | Sqm | |
| 33 | 32 | M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint and over a coat of red oxide primer all as specified and directed | 120 | Sqm | |
| 34 | 33 | Dismantling of plain or corrugated sheeting, any gauge thickness, including nainital or similar pattern roof coverings all as specified and directed. | 35 | Sqm | |
| 35 | 34 | M&L for Galvanised, corrugated 0.63mm thick mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs walls etc with grade of zinc coating 275 all as specified and directed . | 30 | Sqm | |
| 36 | 35 | S&F in plain galvanised,0.63mm thick mild steel sheeting, in ridges hips valley gutters drip and straight flashing ( Length and girth as fixed with grade of zinc coating 275 all as specified and directed. | 5 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
