Kerala State Electricity Board-KSEB has published Fabrication Of Back Clamp For 2Line 4Line Ht Cross Arms 16Mm Stay Rod 20Mm Stay Rod 1 . 8M 2 . 4M And 3M Channel Cross Arm 11 Kv V Cross Arm Back Clamps For 11/33Kv V Cross Arms. Submission Date for this Tender is 20-11-2020. Electrical Products Tenders in C M Division Pallom Kerala. Bidders can get complete Tender details and download the document.
| Name of Work: -Target for the year 2019-20- Fabrication of back clamps for 2line/4line cross arm, back clamps for HT cross arm,2 line cross arm, 4 line cross arm, 16mm stay rod, 20mm stay rod, 1.8m channel cross arm, 2.4m channel cross arm, 3 m channel cross arm, 11 kV V cross arm, back clamps for 11kV/33kV V cross arm for distribution plan at Production Shop, C.M Division, Pallom | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Fabricating back clamps for 2line/4line cross arms of 34cm long using 50 x6mm MS Flat as per design and direction of the departmental officers. | item1 | 8523 | Each |
| 2 | 2 | Fabricating back clamps for HT Crossarms 40cm long using 75x8mm M.S.Flat as per design and stackingthe finished clamps in such a manner that the item can be counted in numbers as per direction of Departmental officers. (Charges inclusive of shearing tools, punch & die etc. complete.) | item2 | 4500 | Each |
| 3 | 3 | Fabricating 2 line cross arms using 50x50x6mm MS angle 61cm long with 2 nos. 14mm dia holes and 2 nos 18mm dia holes as per design including cutting, leveling, punching and stacking the finished products at suitable places as per the direction of departmental officers etc.complete (Charges inclusive of labour, shearing tools, punch & die, etc. complete.) | item3 | 22205 | Each |
| 4 | 4 | Fabricating 4 line crossarms, using MS Angle 65x65x6, 1.065m long with 4 nos. 18 dia holes and 2 nos. 14mm dia holes as per drawing including cutting, levelling and stacking the finished goods in such a manner that item can be counted in numbers and punching stamp marks on the product as per direction of Departmental officers. (Charges inclusive of cost of consumable such as shearing tool, punch & die etc. as per the direction of departmental officers etc.) | 19427 | Each | |
| 5 | 5 | Fabricating stay rod of length 1.70m for LT lines using 16mm dia M. S. rods as per design including marking, shearing, leveling, threading one end to a length of 5 cm suitable to nut of diameter 5/8", making a round hook in the other end and welding the joint and stacking the finished products at suitable places in such a manner that the items can be easily countable in numbers, as per the direction of Departmental officers etc. complete. (Charges inclusive of cost of labour & consumables, punch & die, welding electrode,cutting blade etc.)complete. | 15904 | Each | |
| 6 | 6 | Fabricating 20mm Stay Rod of length 1.70m for HT lines using 20mm dia M.S.Rods as per design including marking, shearing, levelling, threading one end to length of 5cm suitable to nut of dia 3/4", and making a round hook in the other end and welding the joint and stacking the finished products at suitable places in such a manner that the items can be easily counted in numbers and punching stamp marks on the product as per the direction of departmental officers etc. complete. (Charges inclusive of cost of labour & consumables, punch & die, welding electrode,cutting blade etc.)complete. | 11329 | Each | |
| 7 | 7 | Fabricating 1.8m Channel Crossarm using MS Channel 75x40 (ISMC 75) and with 21mm dia drilled/punched holes as per Boards's specification and drawing, including gas cutting, levelling,pand stacking at suitable place as per the direction of the departmental officers (Charges inclusive of cost of labour & consumables,such as cutting gas, LPG , punch & die, drill bit etc.)complete. | 691 | Qtl | |
| 8 | 8 | Fabricating 2.4m Channel Crossarm using MS Channel 75x40 (ISMC 75) and with 21mm dia drilled/punched holes as per Boards's specification and drawing, including gas cutting, levelling and stacking at suitable place as per the direction of the departmental officers (Charges inclusive of cost of labour & consumables, such as cutting gas, LPG, punch & die etc.)complete. | 495 | Qtl | |
| 9 | 9 | Fabricating 3.0m Channel Crossarm using MS Channel 100x50 (ISMC 100) and with 21mm dia drilled/punched holes as per Boards's specification and drawing, including gas cutting, levelling and stacking at suitable place and as per the direction of the departmental officers (Charges inclusive of cost of labour & consumables, such as cutting gas, LPG, punch & die etc.)complete. | 591 | Qtl | |
| 10 | 10 | Fabricating 11kV V Crossarm using 75x40mm MS Channel cutting by gas, bending into required shape and jointed by arc welding in both sides of each gas cutting portion including 2 nos of 50mm long MS Flat 50x6mm on each ends and drilling 4nos. Of 22mm dia holes and 2 nos of 18mm dia holes as per drawing including flux removal, stacking the finished goods in such a manner that item can be counted in numbers as per direction of Departmental officers. (Charges inclusive of labour, cutting gas, welding rod, punch & die, drill bits etc.) complete. | 2000 | Each | |
| 11 | 11 | Fabricating back clamps for 11kV/33kV 'V' Crossarm 44cm long using 75x8mm M.S.Flat as per design and stacking the finished clamps in such a manner that the item can be counted in numbers as per direction of Departmental officers. (Charges inclusive of shearing tools, punch & die etc. complete.) | 2000 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
