Military Engineer Services-MES has published Special Repair To Bldg No . Ts-82 And Perimeter Security Wall And Certain Revenue And Minor Works Under Ge Nagrota . . Submission Date for this Tender is 10-12-2020. Building Repair Tenders in NAGROTA Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 24-Nov-2020 | Corrigendum No. 1 | BOQ | 03-12-2020 |
| 2 | 03-Dec-2020 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 10-12-2020 |
| Name of Work: SPECIAL REPAIR TO BLDG NO. TS-82 & PERIMETER SECURITY WALL AND CERTAIN REVENUE AND MINOR WORKS UNDER GE NAGROTA. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof covering, complete all as specified and directed. | 230 | Sqm | |
| 2 | 2 | S & F prepainted galvatume aluminium zinc coating GI based corrugated/profile steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof coveing/cladding to wall fixed with self tapping screws/L-type or J-type or cranked hook bolts in lieu of screw as per manufacturer instruction, complete all as specified and directed. | 260 | Sqm | |
| 3 | 3 | Plain, aluminium sheeting of thickness 0.56 mm, alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed. | 32 | Sqm | |
| 4 | 4 | Taking down chowkat with shutter (without taking off shutter from the frame) not exceeding 1.5 sqm each and removing from site (wood or steel), complete all as specified and as directed at site. | 13 | Each | |
| 5 | 5 | Taking down chowkat with shutter (without taking off shutter from the frame) exceeding 1.5 sqm but not exceeding 4 Sqm each and refixing in the same opening, complete all as specified and as directed at site. | 5 | Each | |
| 6 | 6 | Demolition of brick work / stone masonry built in cement mortar or cement lime mortar including all quoins ,arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed. | 109 | Cum | |
| 7 | 7 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground levels), complete all as specified and directed. | 5 | Cum | |
| 8 | 8 | Demolition of cement concrete (unreinforced) of any description and any position not other wise specifically provided, complete all as specified and directed. | 0.1 | Cum | |
| 9 | 9 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed. | 0.1 | Cum | |
| 10 | 10 | M&L for Brick work with subclass 'B' old size bricks/ tiles straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed. | 4 | Cum | |
| 11 | 11 | Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed. | 3500 | Sqm | |
| 12 | 12 | M&L for vitrified ceramic tiles 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm,as in patches in floors, set and jointed with cement slurry and pointed with white or coloured cement to match with tiles over and 15mm thick screed bed in cement mortar 1:4 as in floor including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. | 120 | Sqm | |
| 13 | 13 | M&L for mild steel framed work as in roof trusses ( framed) , trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing( Beam, tee, angle, channel or flat sections ) including fabrication. , conforming to grade Fe 410-S, complete all as specified and directed. | 3535 | Kg | |
| 14 | 14 | S & F 100 mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed. | 30 | Each | |
| 15 | 15 | Floor door stopper of aluminium alloy body and tongue , anodised , with hard drawn steel spring , fixed in floor , over all length of cover plate 140 mm , complete all as specified and directed. | 10 | Each | |
| 16 | 16 | S&F aluminium anodised handle extruded section with 125 mm long bolt complete, all as specified . | 20 | Each | |
| 17 | 17 | S & F MS 300 mm ordinary rat rails rod pattern springs including roller and roller plate, complete all as specified and directed. | 5 | Each | |
| 18 | 18 | M&L for hold fast/clamps of mild steel stay for rain water pipes etc. confirm to Fe-290 Gde E-165, complete all as specified and directed | 30 | Kg | |
| 19 | 19 | S & F 250 mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed. | 10 | Each | |
| 20 | 20 | S&F 150 mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed | 20 | Each | |
| 21 | 21 | S & F in repairs Box type steel window side hung double shutters with provision for desert coller/AC (Inside for wire mesh & outside for glass), including guard bar hinges, steel handle, tower bolt and steel peg stay complete with glazaing bar dovetailed for welded and fixed steel window shall be conforming to relevant IS complete all as shown on drawing No CEUZ/TD/1302/09, Sh 1/3 to 3/3 including taking down of existing steel windows, complete all as specified and directed. \nNote : Wire mesh and sheet glass shall be measured and paid separately. | 6 | Sqm | |
| 22 | 22 | S & F in repair box type steel ventilators top hung double shutters (inside for wire mesh out side of glass) including hinges, steel handles, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surfaces before fixing including taking down old. Steel ventilator shall be conforming to relevant IS, complete all as specified and directed.\nNote: Wire mesh and sheet glass shall be measured and paid separately. | 3 | Sqm | |
| 23 | 23 | S & F Anodised aluminium frame for doors, windows, ventilators, with one or more rebates including joining cleat for fixing etc, complete all as specified and directed. | 40 | Kg | |
| 24 | 24 | S&F in repair aluminium door shutter aluminium section weighting 0.55 kg/m including necessary joining cleats, glazing clips rubber neoprene packing handles 02 Nos in each doors hinges anodised alminium sanp beading screws etc complete all as specified and directed | 6.5 | Sqm | |
| 25 | 25 | S&F in repair aluminium anodised window and vetilator shutters side hung tupe without sash bars, aluminium sections weighting 0.55 kg/m including necessary joining cleats, glazing clips rubber packing, aluminium snap beading screwes anodiased aluminium fitting as peg stay complete all as specified and directed | 10 | Sqm | |
| 26 | 26 | S & F 5.5 mm thick sheet glass ordinary quality and glazing with aluminium snap beading in square and fixed to aluminium sections, all as specified and as directed. | 12 | Sqm | |
| 27 | 27 | Second class hardwood 35mm thick factory made plain, framed, panelled shutter (two panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed. | 8 | Sqm | |
| 28 | 28 | S & F 35 mm thick second class hard wood, factory made, glazed and skelton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamered or rounded, fitted with cut and mitred beads for securing glass, etc. Size of memebers of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) for doors, complete all as specified and directed. | 8 | Sqm | |
| 29 | 29 | S & F for PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed. | 9 | RM | |
| 30 | 30 | S & F 30 mm thick (style) Factory made solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. | 3.5 | Sqm | |
| 31 | 31 | GI T Grid system in 600 x 600 mm module which includes providing and fixing wall angle along the perimeter of the room with nylon sleeves and wooden screws at 300 mm centre to center. Suspendeding the main tee of size from the soffit, soffit cleat, rawl plugs and wire rod & leveling spring clip at 1200mm center to center cross tee, interlockined into the pre-cut slots in the main tees at 600 mm centre to center in direction perpendicular to the main tee to make a grid of 600x 1200mm. Finally 600 mm cross tees are interlocked in the pre cut slots in the 1200mm tees at 1200 mm center to center in direction parallel to the main tee. Cross Tees having length more than 600 mm are to be supported independently. 4.5 mm thick E board with square edge of size 595x595 mm shall be placed into the grid size of 600x600mm. Size of grid as specifed by manufactures, complete all as specified and directed. | 105 | Sqm | |
| 32 | 32 | 18/19mm thick solid PVC board, prelaminated one side and other side palin, water proof, terminte proof as in cupboard shutters, partition walls and shelves fixed with frame complete all as specified and directed. | 4 | Sqm | |
| 33 | 33 | S & F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm dia and fixed with tinned tacks or galvanised mild steel staples, complete all as specified and directed. | 12 | Sqm | |
| 34 | 34 | S & F 3.00 mm thick Sheet glass ordinary quality and glazing with oil putty and pin(steel spring for fixing glass) in square n exc 0.5 Sqm in each pane, complete all as specified and directed. | 10 | Sqm | |
| 35 | 35 | All as per ser item No. 34.00 here in above but figured glass. | 1 | Sqm | |
| 36 | 36 | S&F 25mm dia curtain rod aluminium brass polished with ends bulbs rings of required size including bracket, complete all as specified and directed. | 30 | RM | |
| 37 | 37 | M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth without using extra cement, complete all as specified and directed. \n | 300 | Sqm | |
| 38 | 38 | M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4, finished even and smooth without using extra cement, complete all as specified and directed. | 3895 | Sqm | |
| 39 | 39 | Supply only liquid water proofing compound complete all as specified and directed. | 10 | Ltr | |
| 40 | 40 | M & L for roughening surface of old concrete surface of any description over damaged surface irregular fascia, chajja and in similar work and also for narrow width etc and retendering dubbing coat 15 mm thick cement plaster in cement mortar (1:4) over a coat of cement slurry @ 3.00 Kg/Sqm making surface even followed by 05 mm thick rendering in CM (1:3) finished, complete all as specified and directed. | 15 | Sqm | |
| 41 | 41 | Prepration of wood or wooden based new or previously untreated surface of any description, over 10 cm width or gridth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. | 30 | Sqm | |
| 42 | 42 | Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over 2 to 3mm thick wall putty on plastered surface preparing to distempering on wall surface, complete all as specified and directed. | 150 | Sqm | |
| 43 | 43 | Complete removal of existing treatment and applying two coats of oil bound distemper over 2 to 3mm thick wall putty on plastered surface preparing to distempering on wall surface, complete all as specified and directed. | 50 | Sqm | |
| 44 | 44 | Complete removal of existing treatment of old wall surfaces and applying two coats of cement base paint, complete all as specified and directed. | 50 | Sqm | |
| 45 | 45 | Preparation of newly plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed. | 3845 | Sqm | |
| 46 | 46 | Applying two coats of synthetic enamel paint on new steel surface any description not otherwise described over 10 cm width or girth complete all as specified and directed | 10 | Sqm | |
| 47 | 47 | Machine cut kota stone flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing (mirror finish) (each stone not less than 55 cms x 55 cms) over 15 mm thick screed bed in 1:4 as in floor/tread of staircase finished rough including roughening of exisiting surfaces by pick axicess and applying a coat of cement slurry @ 03 kg/sqm of surface, complete all as specified and directed. | 50 | Sqm | |
| 48 | 48 | 18-20mm thick machine cut kota stone slab in skirting, dado, riser of steps/stair case and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing (mirror finish) over 15mm thick rendering in CM 1:4 including taking out existing dado all as specified and directed. | 6 | Sqm | |
| 49 | 49 | M & L for Udaypur green stone 15 to 18 mm thick. (table rubbed and polished) as in cooking plateform of size not less than 2 m in length, incl cutting for sink over and including 20 mm thick screed in CM 1:4 including roughing of existing surface and applying a coat of cement slurry @ 03 Kg/Sqm of surface and pointing with white cement 1:2 using marble dusts admixture of pigment to match, complete all as specified and directed. | 10 | Sqm | |
| 50 | 50 | M&L for non skid ceramic coloured tiles 400x 400 x 7 to 8 mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or beddding layer of CM 1:4, complete all as specified and directed. | 15 | Sqm | |
| 51 | 51 | M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as a sub base to receive topping layer finished even and smooth, complete all as specified and directed | 15 | Sqm | |
| 52 | 52 | M & L for Glazed ceramic coloured printed tiles (first quality) of size 300 mm x 200 mm x 7 mm thick as in vertical surface, dado/skirting, over and including 10 mm thick screed bed in CM 1:4, complete all as specified and directed. | 116 | Sqm | |
| 53 | 53 | M&L for 50mm thick plain cement concrete, 1:3:6, type C1 (using 20mm graded crushed stone aggregates) as in plinth protection/paving including finishing surface even and smooth without using extra cement, complete all as specified and directed. | 140 | Sqm | |
| 54 | 54 | M & L RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in chajjas/parpet, shelves and similar items complete all as specified and directed. | 0.2 | Cum | |
| 55 | 55 | Form work to chajjas troughs, parpet and similar items including edges complete all as specified and directed. | 12 | Sqm | |
| 56 | 56 | Form work to edges of concrete flats RCC/PCC band exc 5cm but not exc 10 cm complete all as specified and directed. | 12 | RM | |
| 57 | 57 | Providing number plate of size 450 x 300x20mm in CM 1:4 and writing builidng No. of height 8 to 10 cm with luminous paint thrugh grooves of size 12 x 12 mm complete all as specified and directed | 1 | Each | |
| 58 | 58 | Framed work rolled section as in framing compound girder staging for water tank, cooler frame and the like built up from two or more beam or channel section or angles with plates srifferners etc complete all as specified and directed | 100 | kg | |
| 59 | 59 | Disconnectiong existing tanks setting aside (or lowering if requied) for repair and cleaning and removing all scales and dirt etc from tank and from mouth of circulating pipes etc and hoisting if required reconnecting and refixing in other position cap of water tank exc 1000 ltr but not exc 2000 ltr including supply and fixing new pve flot valve complete all as specified and directed. | 2 | Each | |
| 60 | 60 | S&F 1000 litres Capacity Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including all accessories includind dismantling of old water storage tank and including PTMT float valve 20 mm bore, complete all as specified and directed. | 2 | Each | |
| 61 | 61 | Taking up or down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store, complete all as specified and directed. | 5 | RM | |
| 62 | 62 | Taking up or down steel tubing and connections 20 mm bore, including cleaning for refixing or removal to store, complete all as specified and directed. | 5 | RM | |
| 63 | 63 | S & F Steel water tubes, medium grade, ISI marked, galvanised ( GI) 20 mm bore with all fittings, and fixing complited to wall and ceiling or laid in floor, complete all as specified and directed. | 5 | RM | |
| 64 | 64 | all as per ser item No. 63.00 here in above but fixing only | 5 | RM | |
| 65 | 65 | S & F Steel water tubes, medium grade, ISI marked, galvanised ( GI) 15 mm bore with all fittings, and fixing complited to wall and ceiling or laid in floor, complete all as specified and directed. | 5 | RM | |
| 66 | 66 | All as per ser item No. 65.00 here in above but fixing only | 5 | RM | |
| 67 | 67 | Cutting chases for concealed water tubing of concealed condut (cutting n exc 10 cm girth) and making good in CM 1:3 in brick wall complete all as specified and directed | 15 | RM | |
| 68 | 68 | S&F in repair 15mm bore Bib taps, cast copper alloy fancy type,screwed down,screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed by Engr-in-Charge. | 4 | Each | |
| 69 | 69 | S&F in repair 15mm bore stop cock, cast copper alloy fancy type,screwed down,screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed by Engr-in-Charge. | 4 | Each | |
| 70 | 70 | CP towel rail of 600mm long of PTMT foxed with including chromium plated brass screw and wooden/plastic cleats complete all as specified and directed | 2 | Each | |
| 71 | 71 | S&F 50mm to 60mm aluminium wardrove hook set of three complete, all as specified . | 1 | Each | |
| 72 | 72 | S&F chromium plated mild steel soap dish complete all as specified and directed | 1 | Each | |
| 73 | 73 | S&F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed | 5 | RM | |
| 74 | 74 | S&F for 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete, all as specified. | 5 | RM | |
| 75 | 75 | S&F for 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed | 5 | RM | |
| 76 | 76 | PVC(SWR) bends any radius for 110mm bore, complete, all as specified . | 3 | Each | |
| 77 | 77 | PVC (SWR) bends any radius for 75 mm bore with oval access door, complete, all as specified . | 3 | Each | |
| 78 | 78 | PVC (SWR) branch pieces single (singleY) equal or unequal for 110 mm bore with oval access door complete all as specified and directed | 1 | Each | |
| 79 | 79 | PVC (SWR) branch pieces single (singleY) equal or unequal for 75 mm bore with oval access door complete all as specified and directed | 1 | Each | |
| 80 | 80 | PVC (SWR) vent cowl 75mm, complete, all as specified . | 1 | Each | |
| 81 | 81 | all as per ser item No. 80.00 here in above but 110mm | 1 | Each | |
| 82 | 82 | PVC(SWR) floor trap with grating including jointing to waste pipe in solvant for 75 mm bore including CP grating cover with or without hole complete all as specified and directed | 2 | Each | |
| 83 | 83 | Vitreous china wash down closet pan (Pedestal pattern) white with ‘S’ trap plastic seat cover white including connection to out going pipe & to flushing pipe, anti syphonage pipe in fixed in repair etc complete all as specified and directed by Engineer-in-charge | 1 | Each | |
| 84 | 84 | S&F vitreous china urinals bowl tupe(half stall) complete including providing and fixing plus, bedding urinal against wall in CM 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (exclusive of fixing, supply pipe to flushing cistern , trap and waste pipe) complete all as specified and directed | 1 | Each | |
| 85 | 85 | 110 mm PVC(SWR) WC connector with lip ring, complete all as specified and directed by Engineer-in-charge. | 1 | Each | |
| 86 | 86 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified. | 221 | Sqm | |
| 87 | 87 | M&L for hard core of broken stone or boulder n exc 63 mm, deposited, spread and levelled in layers n exe 15 cm thick, watered and rammed to a true surface, complete all as specified and directed. | 34.05 | Cum | |
| 88 | 88 | M&L 100 mm thick for cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate), complete all as specified and as directed. | 115 | Sqm | |
| 89 | 89 | M&L sand for 50 mm thick filling under interlocking paver block including watering and consolidation complete all as specified and directed | 6 | Cum | |
| 90 | 90 | M&L machine pressed pre cast concrete interlocking paver (with grey cement and pigment) any shape and size confirming to IS-15658-2006 of 80 mm thickness, M-40 grade complete all specified and directed | 115 | Sqm | |
| 91 | 91 | S&F 15 mm bore PVC connection 450 mm long, complete all as specified and directed. | 4 | Each | |
| 92 | 92 | S&F vitreous china wash basin , white, flat back of size 630 x 450 mm brass waster coupling fixed in position complete all as specified and directed. | 2 | Each | |
| 93 | 93 | Surface excavation n.exc 30cm deep and avg 15 cm deep and getting out any type of soil complete all as specified and directed | 215.5 | Sqm | |
| 94 | 94 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out any type of soil, complete all as specified and directed. | 100.5 | Cum | |
| 95 | 95 | Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm complete in any type of soil,complete all as specified and directed by Engineer-in-Charge. | 23.75 | Cum | |
| 96 | 96 | Removing surplus soil to a distance not exceeding 50m and deposited where directed at a level not exceeding 1.50m from the starting point, complete all as specified and directed. | 81.75 | Cum | |
| 97 | 97 | M & L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as foundation filling and mass concreate, complete all as specified and directed. | 20.25 | Cum | |
| 98 | 98 | M&L brick work with sub class 'B' bricks in 1:4 cement mortar on straight or curved on plan n. exc 6 m , complete all as specified and directed. | 118.7 | Cum | |
| 99 | 99 | All as per ser item No. 98 here in above but except brick | 20 | Cum | |
| 100 | 100 | M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in copings, pllinth course, damp proof course, bed blocks, benching, PCC cills and similar items, complete all as specified and directed. | 6.5 | Cum | |
| 101 | 101 | Rendering 15mm thick on other than foair faces of brick work, stone masonry or concrete surfaces in cement mortor 1:4 on wall surface, finishing even and smooth without using extra cement complete all as specified and directed. | 105 | Sqm | |
| 102 | 102 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed | 75 | RM | |
| 103 | 103 | M&L for PCC 1:3:6 type C-2 as in surface channel/drain complete all as specified and directed | 5 | Cum | |
| 104 | 104 | M&L 100 mm thick cement concrete 1:4:8 type B-1, (using 20 mm graded crushed stone aggregate) as in sub base of floor surface finished even and fair to receive top layer all as specified. | 48 | Sqm | |
| 105 | 105 | M&L 40 mm thick cement concrete 1:2:4 type B-1, (using 20 mm graded crushed stone aggregate) as in floor finished surface even and smooth complete all as specified and directed. | 48 | Sqm | |
| 106 | 106 | M & L for Non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but n exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or beddding layer of CM 1:4, complete all as specified and directed. | 40 | Sqm | |
| 107 | 107 | S&F joint angle channel or tee sections fixed independently without connecting plates etc cut to ordinaty length using Fe 410 grade E 250 as in purlins, rafter etc complete all as specified and directed | 990 | Kg | |
| 108 | 108 | S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J - type or cranked hook bolts, in roofs,walls etc of class -3 complete except sheeting, all as specified. | 64 | Sqm | |
| 109 | 109 | 0.80 mm thick plain , galvanised , mild steel sheeting , in ridges, hips, valley gutters, drip and straight flashing ( length and girth as fixed ) with grade of zinc coating 275gm/sqm, complete all as specified | 5 | Sqm | |
| 110 | 110 | M&L for 75 mm thick cement concrete 1:4:8 type D-2 (40mm graded aggregate) complete all as specified and directed | 33 | Sqm | |
| 111 | 111 | M&L for providing 50 mm thick cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in floors complete all as specified. | 33 | Sqm | |
| 112 | 112 | Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft soil, complete all as specified and directed. | 10 | Each | |
| 113 | 113 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in benching coping and fixing of swan angle etc, complete all as specified and directed. | 1.5 | Cum | |
| 114 | 114 | Walling of random rubble uncoursed webonded,bedded and solidly hearted built in CM 1:6 complete all as specified and directed. | 5 | Cum | |
| 115 | 115 | M&L for 110 mm bore PVC (SWR) pipes in any length laid in retaining wall for weep holes etccomplete, all as specified. | 5 | RM | |
| 116 | 116 | MS work in fencing post (horn), Y shaped angle over wall fixed in position complete all as specified and directed | 550 | Kg | |
| 117 | 117 | MS work as grill/greeting including fixing in position with necessary fixing arrangement complete all as specified and directed | 100 | Kg | |
| 118 | 118 | M&L for preparation of steel and iron new surfaces of any description not otherwise described over 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified. | 26 | Sqm | |
| 119 | 119 | Galvanised 2 strand steel barbed wire 2.24 mm dia with barbed , 2 mm dia bars at 75 mm spacing & straining and fixing to any type of standarad rails strining bolts including securing or tying at crossing with & provision of galvanised Mild steel wire staples or steel pins etc as directed (each line wire of wire to be measured) all as specified | 10 | 100RM | |
| 120 | 120 | S&F as in repair 600mm dia and 150mm prolong concertina coil galvanished including securing typing at crossing with and provision of galvanished mild seel wire staples or steel pins etc,complete all as specified and directed | 150 | RM | |
| 121 | 121 | RCC M-25 (Nominal mix) as in beam & plinth/lintel/roof band, (using 20mm graded crushed stone aggregate) complete all as specified | 6.9 | Cum | |
| 122 | 122 | Use and waste of form work to sides of concrete foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc and mass concrete all as specified | 60 | Sqm | |
| 123 | 123 | Mild Steel TMT bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified. | 500 | Kg | |
| 124 | 124 | S&F 5 mm dia & over upto & including 10 mm dia iin stups, spacer and binder complete all as specified and directed | 200 | Kg | |
| 125 | 125 | Taking down carefully aluminium conductor point wiring (light fan, socket and power) complete with fittings such as switches, sockets, lamps holder, utility light fitting, fan regulator etc and making good disturbed surface of walls and floors etc. and keeping in safe custody for taking credit, complete all as specified and directed by Engr-in-Charge. | 64 | Per point | |
| 126 | 126 | Taking down ceiling fan any sweep, removing blades, cleaning the fan completly for dust and dirt and hanging the same back to its original position including connecting the 3 core flexible copper wire to ceiing rose etc after the completion the point wiring including replacement old unservicable fan hook, rubber pad, nut bolts and washers etc, complete all as specified and directed by Engineer in charge. | 4 | Each | |
| 127 | 127 | M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2mm thick covered with 3 mm thick plastic laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 1.5sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly, complete all as specified and directed for the following:- | |||
| 128 | 127.01 | (a) One light point controlled by one switch 5 Amp. | 34 | Per point | |
| 129 | 127.02 | (b) One ceiling fan/exhaust fan point controlled by one switch 5Amp | 6 | Per point | |
| 130 | 127.03 | (c) One socket outlet 5Amp controlled by one switch on same board. | 4 | Per point | |
| 131 | 127.04 | (d) One socket outlet 5 Amp controlled by one switch on independent board. | 11 | Per point | |
| 132 | 128 | All as per ser item No 95.00 here in before but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15 Amp socket out let controlled by one 15 Amp switch on independat board. | 9 | Per point | |
| 133 | 129 | S&F switch piano flush type 5 Amps single pole one way, complete all as specified and directed. | 40 | Each | |
| 134 | 130 | S&F switch socket combination 2 in 1, 3 pin, 5 Amp flush type, complete all as specified and directed. | 15 | Each | |
| 135 | 131 | S&F switch socket combination 2 in 1 5 pin 5 /15 Amps flush type, complete all as specified and directed. | 9 | Each | |
| 136 | 132 | S&F of ceiling rose 3 terminal PVC/Polycarbonate isolated body, complete all as specified and directed. | 21 | Each | |
| 137 | 133 | S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required, complete all as specified and directed. | 4 | Each | |
| 138 | 134 | S & F Integrel sleek extruded batten aluminium /CRCA channel fitting with LED 18 watt complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, complete all as specified and directed. | 13 | Each | |
| 139 | 135 | S & F batten integrated LED channel of 5W, 230 V frequency 50/60 Hz integral sleek extruded polycarbonate LED channel with white acrylic cover, power factor not less than 0.9 , complete all as specified and directed. | 2 | Each | |
| 140 | 136 | S & F LED light fitting 1x9W bulk head luminaries IP 65 complete with all accessories including LED lamp 10 watt , connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V 50 Hz, complete all as specified and directed. | 4 | Each | |
| 141 | 137 | S&F decorative wall mounted luminarie with and including 9 watt LED lamp Complete all as specified and directed | 8 | Each | |
| 142 | 138 | S&F lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. | 7 | Each | |
| 143 | 139 | S & F LED bulb 7 watt complete all as specified and directed. | 7 | Each | |
| 144 | 140 | S&F in rpeiar sheet metal enclosure distribution board SPN 12 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail, complete all as specified and directed. | 1 | Each | |
| 145 | 141 | S&F MCB DP 63 Amps 10 KA 230 Volts 'C' series complete all as specified and directed | 1 | Each | |
| 146 | 142 | S & F MCB single pole 6 to 32 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed. | 10 | Each | |
| 147 | 143 | M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion, complete all as specified and directed. | 1 | Each set | |
| 148 | 144 | Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ? 48,043.00 during AOC\nNote:- Tenderers shall not quote for this Schedule |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
