}

Construction Of Veterinary Dispensary Building At Bahedi Tehsil Ramshehar Distt , Solan ( H . P . ) As Per Architectural Drawings Sr . No 4145 Drawing No 11/1 Sh-C/O Building Portion , W . S . And S . I . , Septic Tank And Soak Pit And Rain Har, Nalagarh-Himachal Pradesh

Public Works Department-PWD has published Construction Of Veterinary Dispensary Building At Bahedi Tehsil Ramshehar Distt , Solan ( H . P . ) As Per Architectural Drawings Sr . No 4145 Drawing No 11/1 Sh-C/O Building Portion , W . S . And S . I . , Septic Tank And Soak Pit And Rain Har. Submission Date for this Tender is 11-11-2020. Building Work Tenders in Nalagarh Himachal Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

25870859
Construction Of Veterinary Dispensary Building At Bahedi Tehsil Ramshehar Distt , Solan ( H . P . ) As Per Architectural Drawings Sr . No 4145 Drawing No 11/1 Sh-C/O Building Portion , W . S . And S . I . , Septic Tank And Soak Pit And Rain Har
Open Tender
Indian
Himachal Pradesh
Nalagarh
11-11-2020

Tender Details

construction of Veterinary Dispensary Building At Bahedi Tehsil Ramshehar Distt , Solan ( H . P . ) As Per Architectural Drawings Sr . No 4145 Drawing No 11/1 Sh-C/O Building Portion , W . S . And S . I . , Septic Tank And Soak Pit And Rain Harvesting Tank And Site Development ) .

Key Value

Document Fees
INR 500 /-
EMD
INR 27750.0 /-
Tender Value
INR 13.55 Lakhs /-

BOQ Items

Name of Work: C/O Veterinary Dispensary building at Bahedi Tehsil Ramshehar Distt, Solan (H.P.) As per Architectural drawings Sr. No 4145 Drawing No 11/1 SH:-C/O Building portion, W.S. & S.I., Septic tank and soak pit and Rain harvesting Tank & Site development)
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out of rock;(where blasting is prohibited) and their intermediate classification of soils including ,dewatering wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD.specification of 1990 volume-I and sorting out useful & unuseful materials and stacking the same in all leads and lifts and transportation of the unuseful materials for filling in roadways, embankments for grades improvement and leveling to required grades and then disposing of surplus excavated earth in acquired width of road or on approved dumping sites through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and all labour,machineries,materials,tools equipments and safety measures and incidentals nrcessary to complete the work by mechanized means and labour (if any required) .All usefull materials, such as stones,shingles,aggregate and slates shall be sorted along road side to the maximum possible extent in all leads and lifts through all modes of transportation. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects. BI01010001010000000000000515BI0100001113 86.16 Per cubic meter
2 2 Excavation in earth work in drains and channels in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft & hard and wedging out of rock;(where blasting is prohibited)and their intermediate classification of soils including ,dewatering wherever required, setting out to required lines, grades, side slopes, trimming bottoms and levels as shown on the drawing and as directed by the Engineer-in-Charge at site, according to the H.P.PWD. specification of 1990 volume - I and sorting out useful unuseful materials and stacking the same in all leads and lifts and transportation of the unuseful materials for filling in roadways, embankments for grades improvement and leveling to required grades and then disposing of surplus excavated earth in acquired width of road or on approved dumping sites through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and all labour, machineries, materials tools equipments and safety measures and incidentals necessary to complete the work by mechanized means and labour (if any required) . All useful materials, such as stones, shingles, aggregate and slates shall be sorted out and stacked along road side to the maximum possible extent in all leads and lifts through all modes of transportation, Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor shall have to be duly compensated by him in all respects. BI01010001010000000000000515BI0100001114 51.3 Per cubic meter
3 3 Cutting in earth work in all heights / depths and in all kinds of soil such as kankar, moorum, shingle & decomposed or soft rock and hard rock including their intermediate classification and chiselling / wedging out rock where blasting is prohabited including saturated soil and filling in embankment etc., where necessary and disposal of all excavated un serviceable material in all leads and lifts including through mechanical transporation, the disposal of unserviceable materials will be done in acquired width of the road or on approved dumping site. Any damage to the private / public property during execution will be restored by the contractor what so ever the nature of the same may be. The serviceable materials will be stacked to specification, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001115 150.91 Per cubic meter
4 4 Earthwork in excavation for structures as per drawing and technical specification clause 305.1 including setting out, consolidation of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 mtrs., dressing of sides and bottom and backfilling in trenches with excavated suitable material. -upto 3.00 mtrs. depth. including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001116 28.8 Per cubic meter
5 5 Construction of embankment with approved materials deposited at site from road way cutting and excavation from drain and foundation of all other structure or other sources graded and compacted in 200 mm(two hundred millimetre) thickness with three wheel static Roller l 80-100(eighty hundred) Kilo Netwon static weight road roller to meet requirementof table 300.1 and 300.2 as per MORD technical speficiations clause 301.5 including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001117 150.91 Per cubic meter
6 6 Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including carriage of all labour equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001118 4.77 Per cubic meter
7 7 Providing form work with steel plates 3.15 (Three point One Five ) millmetress thick welded with angle iron in frame 30x30x5 (Thirty in to Thirty in to Five ) millmetress, so as to give a fair finish including centring, shuttering, strutting and propping etcetrawith wooden battens and ballies in all heights of propping and centering below supporting floor to ceiling and removal of the same in-situ-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels Sides and soffits of beams, beam haunching cantilevers, brssumers and lintels not exceeding 1 metre in depth in all heights from flooras per HP.PWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001119 14.95 Per square meter
8 8 Providing form work with steel plates 3.15 (Three point One Five ) millmetress thick welded with angle iron in frame 30x30x5 (Thirty in to Thirty in to Five ) millmetress, so as to give a fair finish including centring, shuttering, strutting and propping etcetrawith wooden battens and ballies in all heights of propping and centering below supporting floor to ceiling and removal of the same in-situ-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels Sides and soffits of beams, beam haunching cantilevers, brssumers and lintels not exceeding 1 metre in depth in all heights from flooras per HP.PWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001120 9.2 Per square meter
9 9 Providing and laying cement concrete 1:4:8 [ One cement: Four sand: Eight graded crushed hard stone aggregate 40 (Forty) millmetress nominal size] mechanically mixed, vibrated and curing complete , excluding cost of form work in foundation and plinth, as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges BI01010001010000000000000515BI0100001121 12.35 Per cubic meter
10 10 Providing and laying concrete for plain/ reinforced concrete in open foundation complete as per drawing and technical specification clause 802,803,1202,1203. -P.C.C grade 1:3:6, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001122 91.29 Per cubic meter
11 11 Providing and laying damp proof course 38mm thick with cement concrete 1:2:4[ One cement: two sand: four graded crushed hard stone aggregate 12.5mm ( Twelve point five millimeters) nominal size] and curing completencluding carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges BI01010001010000000000000515BI0100001123 7.81 Per square meter
12 12 Applying a coat of hot bitumen (mexphalt 80/100 ( Eighty over hundred) or equivalent) using 1.70 kg.( One point seventy kilograms) per square metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oilncluding carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges BI01010001010000000000000515BI0100001124 7.81 Per square meter
13 13 Providing and laying cement concrete 1:1.5:3 [ One cement: One and half sand: Three graded crushed hard stone aggregate 20 (Twenty) millmetress nominal size]mechanically mixed, vibrated and curing complete to obtain the minimum crushing strength of M-20 (M-Twenty) grade in Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges BI01010001010000000000000515BI0100001125 2.38 Per cubic meter
14 14 Providing Tor steel /TMT Steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire upto all heights including carriage of material in all leads and lifts as per H.P. PWD spesification 1990 volume - I, including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001126 249.14 Per kilogram
15 15 Brick work using second class common burnt clay building bricks in foundation and plinth in cement mortar 1:6 (one cement :six sand) as per H.P. PWD spesification 1990 volume - I, including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001127 41.63 Per cubic meter
16 16 Brick work using secondclass common burnt clay building bricks in Super-structure above plinth level upto floor two level in cement mortar 1:6 (one cement :six sand) as per H.P. PWD spesification 1990 volume - I, including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001128 24.12 Per cubic meter
17 17 Half brick masonry in second class common burnt clay building bricks in foundation and plinth in CM 1:4 (one cement :four sand) as per H.P. PWD spesification 1990 volume - I, including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001129 3.06 Per square meter
18 18 Half brick masonry in second class common burnt clay building bricks in foundation and plinth in CM 1:4 (one cement :four sand) as per H.P. PWD spesification 1990 volume - I, including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001130 1.86 Per square meter
19 19 Providing and fixing anodised aluminium work for door, window, ventilators and partitions glazed partions frames with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws. All complete as per architectural drawing including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001131 168.16 Per kilogram
20 20 Providing and fixing glazing with glass panes of 4mm ( Four millimeters)thickness (weight not less than 10.00 kg/sqm. (Ten kilogram per square meters) in aluminium door, window, ventilator shutters and partition etc with PVC/ neoprens gasket etc. complete as per the architectural drawings and the directions including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001132 9.67 Per square meter
21 21 Providing and fixing 250 X 16 mm (two hundred fifty in to sixteen millmetres) aluminium sliding bolts (Barrel type) anodized transparent or dyed to required shade and colour with bolts and nuts etc. complete including carriage of materials in all leads and lifts. BI01010001010000000000000515BI0100001133 3 Each
22 22 Providing and fixing 200 X 10 mm ( Two hundred into ten millimeters) aluminum tower bolts anodized or dyed to required shade with necessary screws etc. complete, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001134 6 Each
23 23 Providing and fixing 150 X 10 mm ( One hundred fifty into ten millimeters) aluminum tower bolts anodized or dyed to required shade with necessary screws etc. complete, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001135 20 Each
24 24 Providing and fixing 125 mm (One hundred twenty five) millimeter. aluminum handles anodized or dyed to required shade with necessary screws etc. complete, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001136 6 Each
25 25 Providing and fixing 100 mm (One hundred ) millimeter aluminum handles anodized or dyed to required shade with necessary screws etc. complete, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001137 14 Each
26 26 Providing and fixing bright finished hard drawn hooks and eyes 150( One hundred fifty) millimeters including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001138 14 Each
27 27 Providing and fixing 5 ( Five) millimeters plain asbestos cement sheet ceiling of pproved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001139 38.39 Per square meter
28 28 Providing and fixing plain square edged cover fillets (beading) 40 mmx12mm( Forty millimeters by twelve millimeters) section with wood screws in ceiling and lining including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001140 124.73 Per Running meter
29 29 Providing and fixing M.S. grills of required pattern in wooden / PVC frames of windows etc. with M.S. flats square or round bars with rounded headed bolts and nuts or by screws including carriage of material in all leads and lifts Plain grill including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001141 73.26 Per kilogram
30 30 Providing and laying automatic Vibro compressed precast terrazzo tiles and polished IS marked No. IS 1237 of approved shade in floor, treads of steps and landings on a bed of 25 mm (Twenty five millimeters) average thickness of cement mortor 1:6 ( one cement : six sand). in the ratio of 70 % (Seventy percent) white 30% ( thirty percent) grey cement of 0,B,2B chips of in proportion 55% ( fifty five percent)white & 15% ( Fifteen percent) of each green, yellow, maroon & dark shade of NTC or its equalent including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001142 38.39 Per square meter
31 31 Providing and laying automatic Vibro compressed precast terrazzo tiles and polished IS marked No. IS 1237 of approved shade skirting and dado on a bed of 25 mm (Twenty five millimeters) average thickness of cement mortor 1:6 ( one cement : sixsand). in the ratio of 770 % (Seventy percent) white 30% ( thirty percent) grey cement of 0,B,2B chips of in proportion 55% ( fifty five percent)white & 15% ( Fifteen percent) of each green, yellow, maroon & dark shade of NTC or its equalent including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001143 4.16 Per kilogram
32 32 Providing and laying spartic ceremic tiles 5.5mm ( five point five millmetres) thick in flooring 300x300mm ( Three hundred by three hundred millmetres) size treads of steps laid on a bed of 12mm thick cement mortor 1:3 ( one cement: three sand ) flushed with pointing in white cement including carriage of material in all leads and lifts. BI01010001010000000000000515BI0100001144 7.3 Per square meter
33 33 White glazed tiles 6mm (six millimeter) thick in skirting risers of steps and dado of Nitco/ Kajaria/ Orient etc. or equalent on 12mm ( Tweleve millimeters) thick cement mortar 1:3 (1cement : 3sand) and jointing with neat cement slurry including carriage of material in all leads and lifts. BI01010001010000000000000515BI0100001145 6.89 Per square meter
34 34 Providing and laying marble work (Table rubbed and polished) in flooring 20mm (Twenty millimeters) . thick base in cement mortar 1:3(1cement:3sand) including jointing with cement mortar 1:2( One white cement:Two marble dust) with an admixure of pigment to match the shade of the marble 20 mm(Twenty millimeters) thick White makrana marble including carriage of material in all leads and lifts. BI01010001010000000000000515BI0100001146 4.35 Per square meter
35 35 Providing and fixing on wall face PVC (D-Plast) 10 mm(One hundred ten millimeters) diameter pipes.rain water pipes of working pressure not less than 4.5( Four point five) kilogram/per square meter including filling the joints with approved adhesive complete as directed by the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001147 13.8 Per Running meter.
36 36 Providing and fixing PVC (D-Plast) Plain bend 10 mm(One hundred ten millimeters) diameter pipes. for rain water pipes including filling the joints with approved adhesive complete as directed by the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001148 12 Each
37 37 Providing and fixing PVC (D-Plast) collar 10 mm(One hundred ten millimeters) diameter pipes. for rain water pipes including filling the joints with approved adhesive complete as directed by the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001149 8 Each
38 38 Providing and fixing PVC (D-Plast) clamp 10 mm(One hundred ten millimeters) diameter pipes. ISI marked for rain water pipes including filling the joints with approved adhesive complete as directed by the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001150 8 Each
39 39 Providing and fixing 0.60 mm (zero point sixty millmetres)thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 ( five) microns primer coating to back coat of polyster of 5 ( five) microns over 5(five)microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of the Engineer-In-Charge.as per HP.PWD. specification 1990 volume-1, including carriage of all labour equipment and materials to various locations of site through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001151 74.51 Per square meter
40 40 Providing and fixing 0.60 mm (zero point sixty millmetres)thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 ( five) microns primer coating to back coat of polyster of 5 ( five) microns over 5(five)microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of the Engineer-In-Charge.as per HP.PWD. specification 1990 volume-1, including carriage of all labour equipment and materials to various locations of site through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001152 26.08 Per running meter
41 41 Providing fixing 15 cm ( fifteen centmeters)wide 45 cm (forty five centmeters)deep box type 0.45mm thick prepainted steel sheet in roofing with hot dipped mettalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster 5 (Five) microns over primer coating gutter with iron brackets 40x3 mm ( Forty into three millimeters) sizes bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per design including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. . BI01010001010000000000000515BI0100001153 32.24 Per running meter
42 42 Providing and fixing mild steel. BP Sheet 1.66 mm ( one point six six millmetres ) to 2mm (two millmetres) thick in eaves /facia /soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of materials within all leads and lifts. BI01010001010000000000000515BI0100001154 23.73 Per square meter
43 43 Steel work welded in built up sections, trusses and framed work, including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials within all leads and lifts :-In trusses and trussed purlins in building including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001155 19.72 Per quintal
44 44 Providing and fixing M.S. round holding down or anchor bolts with nuts and washer plates complete including carriage of materials within all leads and lifts :- BI01010001010000000000000515BI0100001156 3 Per quintal
45 45 Painting two costs (excludingn priming cost on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters with enamel paint other than white including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001157 40 Per square meter
46 46 Applying Birla/ JK white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001158 210.6 Per square meter
47 47 Applying one coat with acrylic primer / kamdhenu primer paint of approved brand and manufacture for interior grade on undecorated concrete / stone / plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001159 210.6 Per square meter
48 48 Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001160 84.14 Per square meter
49 49 15 mm ( Fifteen millimeters) cement plaster in single coat on rough side of brick/concrete/stone walls plastering upto all heights including arises, Internal rounded angles,chamfers and / or rounded angles not exceeding 80 (Eighty millimeters) rounded angles,chamfers and/or rounded angles not including arrises,internal IN Cement mortar 1:4 (one cement :four sand) including carriage of materials within all leads and lifts as directed by Engineer-in-Charge. BI01010001010000000000000515BI0100001161 126.46 Per square meter
50 50 15 mm ( Fifteen millimeters) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all heights including arises, Internal rounded angles,chamfers and / or rounded angles not exceeding 80 (Eighty millimeters) rounded angles,chamfers and/or rounded angles not including arrises,internal IN Cement mortar 1:4 (one cement :four sand) including carriage of materials within all leads and lifts as directed by Engineer-in-Charge. BI01010001010000000000000515BI0100001162 84.14 Per square meter
51 51 15mm ( Fifteen millimeters) Cement plaster in two coats,backing coat 15mm ( Fifteen millimeters) and finishing coat 5mm ( Fife millimeters) thick on rough side of brick/stone masonry walls for interior plastering upto floor two level mm in girth and finished even and smooth.exceeding 80 rounded angles, chamfers and/or rounded angles not including arrises,internal IN Cement mortar 1:4( one cement: four sand)including carriage of materials within all leads and lifts as directed by Engineer-in-Charge. BI01010001010000000000000515BI0100001163 33.53 Per square meter
52 52 Wall painting (Two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces on all floor to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign material and sand papered smooth including carriage of materials within allleads and lifts. BI01010001010000000000000515BI0100001164 126.46 Per square meter
53 53 Providing under layer for plinth protection of 75 mm (Seventy five millmetres) thick (unconsolidated) bed dry brick / stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001165 17.9 Per square meter
54 54 Providing plinth protection 50mm thick in cement concrete 1:3:6 (one Cement : three Sand : six Graded stone aggregated 20mm( Twenty millimeters) nominal size) including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001166 17.9 Per square meter
55 55 Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm ( Fifteen by tewnty two centimeters) in cement mortar 1:6 (one Cement : six Sand)and insideplastring with cement plaster 1:3 (one Cement:three Sand) including earth work andlaying 10 cm (Ten centimeters) cement concrete in 1:5:10 (one Cement : five Sand : ten graded stone aggregate) of 40 mm ( forty millimeters) nominal size) and 7.5 cm ( Seven point five centimeters) cement concrete 1:2:4 (one Cement : two Sand : four Graded stone aggregate of 20 mm (twenty millimeters) nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of materials within all leads and lifts. BI01010001010000000000000515BI0100001167 44.86 Per Running meter
56 56 Providing and fixing to wall (Medium grade)15 millimeters ( Fifteen millimeters) nominal bore ceiling and floor glavanised mild steel tubes (medium grade) fittings and clamps including making good the wall, ceiling and floor including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001168 25 Per Running meter
57 57 Providing and laying in trenches galvanized mild steel tube(medium grade)20 (Twenty ) millmetress diametre tube fittings (earth work in trenches to be measured and paid for separately)., as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges . BI01010001010000000000000515BI0100001169 75 Per Running meter
58 58 Providing and fixing to wall ceiling and floor glavanised mild steel tubes 15( Fifteen ) millimeters nominal bore including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001170 20 Per Running meter
59 59 Providing and fixing to wall ceiling and floor glavanised mild steel tubes 20 (Twenty) millimeters nominal boreincluding carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001171 15 Per Running meter
60 60 Fixing of water meter stop cock 20 (Twenty) millimeters including fittings such as mild steel galvanized jam nut, sockets etc. cutting and making long secrews complete as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges . BI01010001010000000000000515BI0100001172 1 Each
61 61 Constructing chamber 300 (three hundred) X 300(three hundred) X 500 (five hundred) millmetres inside size for stop cock with C.I. surface box 100 (one hundred millmetres) X 100 (one hundred) X 75 (seventy five) millmetres (inside) with hinged cover fixed in cement concrete slab 1:2:4 (one cement : two Sand : four graded stone aggregate 20 (twenty) millmetres nominal size) 75 mm (seventy five millmetres) thick foundation concrete 1:5:10 (one cement : five sand : ten graded stone aggregate 40 (forty) mm nominal size and inside plastering with cement mortar 1:3 (one cement : three sand) finished with a floating coat of neat cement including curing complete: -with 100 (one hundred) millmetres cast in situ plain cement concrete walls in 1:2:4 (one cement : two Sand : four graded stone aggregate 20 (twenty) millmetres nominal size) complete with form work with 100 ( one hundred) millmetres thick wall of brick masonry in cement mortar 1:5 ( one cement : five sand ) including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001173 2 Each
62 62 Constructing chamber 300 (three hundred) X 300(three hundred) X 500 (five hundred) millmetres inside size for stop cock with C.I. surface box 100 (one hundred millmetres) X 100 (one hundred) X 75 (seventy five) millmetres (inside) with hinged cover fixed in cement concrete slab 1:2:4 (one cement : two Sand : four graded stone aggregate 20 (twenty) millmetres nominal size) 75 mm (seventy five millmetres) thick foundation concrete 1:5:10 (one cement : five sand : ten graded stone aggregate 40 (forty) mm nominal size and inside plastering with cement mortar 1:3 (one cement : three sand) finished with a floating coat of neat cement including curing complete: -with 100 (one hundred) millmetres cast in situ plain cement concrete walls in 1:2:4 (one cement : two Sand : four graded stone aggregate 20 (twenty) millmetres nominal size) complete with form work with 100 ( one hundred) millmetres thick wall of brick masonry in cement mortar 1:5 ( one cement : five sand ) including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001174 3 Each
63 63 Providing and fixing P.V.C squn spigot and socket soil, waste and ventilating pipes 150 (One hundred fifty) millimeters including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001175 20 Each
64 64 Providing and fixing P.V.C squn spigot and socket soil, waste and ventilating pipes 110 (One hundred ten) millimeters including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001176 29 Each
65 65 Providing and fixing P.V.C squn spigot and socket soil, waste and ventilating pipes 75 ( seventy five) millimeters including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001177 10 Each
66 66 Providing and fixing PVC single equal branch with oval access door 150 (One hundred fifty) millimeters including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001178 3 Each
67 67 Providing and fixing PVC single equal branch with oval access door 110 (One hundred ten) millimeters including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001179 3 Each
68 68 Providing and fixing PVC single equal branch with oval access door 75 ( seventy five) millimeters including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001180 3 Each
69 69 Providing and fixing PVC ISI marked Collars 150 (One hundred fifty) millimeters including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001181 5 Each
70 70 Providing and fixing PVC ISI marked Collars 110 (One hundred ten) millimeters including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001182 4 Each
71 71 Providing and fixing PVC ISI marked Collars 75 ( seventy five) millimeters including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001183 3 Each
72 72 Providing & fixing P.V.C Plain bend complete 150 (One hundred fifty) millimeters including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001184 4 Each
73 73 Providing & fixing P.V.C Plain bend complete 110 (One hundred ten) millimeters including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001185 4 Each
74 74 Providing & fixing P.V.C Plain bend complete 75 (Seventy five) millimeters including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001186 3 Each
75 75 Double equal branch of required degree with oval access door 150 (One hundred fifty) millimeters including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001187 4 Each
76 76 Double equal branch of required degree with oval access door 110 (One hundred ten) millimeters including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001188 4 Each
77 77 Double equal branch of required degree with oval access door75 (Seventy five) millimeters including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001189 3 Each
78 78 P/F PVC clamp ISI marked 150 (One hundred fifty) millimeters including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001190 5 Each
79 79 P/F PVC clamp ISI marked 110 (One hundred ten) millimeters including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001191 4 Each
80 80 P/F PVC clamp ISI marked 75 (Seventy five) millimeters including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001192 3 Each
81 81 P/F PVC reducer 150 (One hundred fifty) millimeters including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001193 5 Each
82 82 P/F PVC reducer 110 (One hundred ten) millimeters including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001194 3 Each
83 83 Providing & fixing 75 (Seventy five)millimeters dia cast iron floor trap including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001195 3 Each
84 84 Providing & fixing 100 millimeters (hundred millimeters) dia cast iron floor trap including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001196 5 Each
85 85 Providing and fixing vitreous china water closet squatting pan(Indian Type W.C).Orrissa Pattern I.S.I marked size 580(Five Hundred Eighty) millimeters, as per HP.PWD.specification,including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges . BI01010001010000000000000515BI0100001197 1 Each
86 86 Providing and fixing 100 (One hundred) millimeters PVC P or S trap for water closet (Squatting pan) including jointing the trap with soil pipe in cement mortar 1:1(One cement isto One sand) (Seat and cover to be measured and paid for separately) including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001198 1 Each
87 87 P/F in Cement Mortar 1:3( One : three), a pair of veterious china foot rests size 250x130x30 ( Two hundred fifty into one hundred thirty into thirty )millimeters for long pattern Pan water closet including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001199 1 Each
88 88 Providing and fixing PTMT white high density polythene /poly ropylene(10 Ten) liters capacity(full flush) European standard control low level flusing cistern with fittings with a pai of brackets with fitting such as lead valve. Syphon, 15 (Fifteen) millimeters. nominal size PVC ball valve with polythene float, with push button , couplings for connection with inlet, outlet and over flow pipe, 40 (Forty) millimeters. dia C.P flush bend including cutting holes in walls and providing and making good the same and connecting the flush bend with cistern and closer including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001200 1 Each
89 89 Providing and fixing plastic seat(solid/hollow type)and cover for wash down water closet with chromium plated brass hinges and rubber buffers. Solid type plastic seat and cover as per HP.PWD specification ,including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges BI01010001010000000000000515BI0100001201 1 Each
90 90 P/F PTMT Jet spray of approved quality & colour with one meter tube including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001202 1 Each
91 91 P/F 15( Fifteen) millimeters mixer for kitchen sink with top / bottom swining spout including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001203 1 Each
92 92 P/F in positon brass mosquito proof coupling for 25 (Twenty five) millimeters dia overflow pipe.( Over flow pipe to paid separately) including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001204 2 Each
93 93 Providing and fixing vitreous China Laboratory basin with single hole for pillar tap with CI or M.S. brackets painted white including cutting holes and making good the same but excluding fittings. (550x400) ( Five hundred fifty into four hundred) millimeters)including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. BI01010001010000000000000515BI0100001205 2 Each
94 94 Providing and fixing vitreous china pedestal for wash basin I.S.I marked flat back complete recessed at the back for the reception of pipe fiotting as per HP.PWD. Specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges BI01010001010000000000000515BI0100001206 2 Each
95 95 Providing and fixing 600*450 mm.( Six hundred in to four hundred fifty millimeters) with bowl depth 250 mm.( Two hundred fifty millimeters) Stainless Steel Sink approved standard ISI make with drain board and C.P waste with C/I or M.S brackets painted white including cutting hole and making good the same but excluding fittings including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001207 1 Each
96 96 Providing and fixing white glazed fire clay : 610 mm X 460 mm X 200 mm ( six hundred ten into four hundred sixty in to two hundred ) millimeters) kitchen sink with C.I. or M.S. brackets, painted white including cutting holes in walls and making good the same but excluding fitting, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001208 2 Each
97 97 Providing & fixing 32mm (thirty two mm) dia rubber plug for sink or wash basin as directed by the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001209 2 Each
98 98 Providing & fixing dia MI union for wash basin or sink including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001210 2 Each
99 99 Providing and fixing C.P. Brass waste for wash basin or sink 32(Thirty two) millimeters dia. including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001211 2 Each
100 100 Providing & fixing 32mm (thirty two mm) dia heavy duty make ISI marked no 8931 and 8934) bottle trap for wash basin including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001212 2 Each
101 101 Providing & fixing 100mm (hundred mm) dia CP heavy duty makes ISI marked no 8931 and 8934 grating for gully Nahni trap as directed by the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001213 3 Each
102 102 Providing & fixing 600 x 450mm (six hundred into four hundred fifty mm) beveled edge mirror of superior class mounted on 6mm thick AC sheet of plywood sheet fixed with wooden plugs with CP brass screws and washers complete as directed by the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001214 2 Each
103 103 Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts BI01010001010000000000000515BI0100001215 5 Each
104 104 Prov. And fixing 600(Six hundred) millimeter x 120(One hundred twenty) millimeters glass shelf with C.P. brass brackets and guard rail complete, fixed to wooden plug with C.P. brass screws, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001216 2 Each
105 105 Providing and fixing CP brass toilet paper holders including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge BI01010001010000000000000515BI0100001217 1 Each
106 106 Providing & fixing liquid soap container with CP brass lidincluding carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge BI01010001010000000000000515BI0100001218 2 Each
107 107 Providing & fixing chromium plated heavy duty ISI marked no 8931 and 8934) brass soap dish with CP brass brackets fixed to wooden cleats with CP brass screws as directed by the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001219 2 Each
108 108 P/F CP Brass stop cock with capstan head:-15 mm dia including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001220 2 Each
109 109 Providing and fixing C.P. brass pillar tap with capstan head 15 mm dia, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge. BI01010001010000000000000515BI0100001221 2 Each
110 110 Providing and Fixing 15mm (fifteen millimeters)dia C.P stop cocks including carriage of materials within all leads and lifts BI01010001010000000000000515BI0100001222 4 Each
111 111 Providing and fixing brass angle valve 15 (fifteen) mm without Nuts and pipe, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge BI01010001010000000000000515BI0100001223 3 Each
112 112 40mm ( Fourt millimeters) thick Cement concrete flooring 1:2:4 (one cement : two sand : four graded stone aggregate 20mm ( twenty millimetres) nominal size) laid in one year finished with a floating coat of neat cement including carriage of materials within all leads and lifts BI01010001010000000000000515BI0100001224 5.52 Per Square meter
113 113 Providing and fixing PVC vent pipe for cowl I.S.I marked including cutting holes in walls and making good the same, as per HP.PWD.specification,including carriage of all labour equipment and material to various location through all modes of transportation in all leads ifts and all incidental charges BI01010001010000000000000515BI0100001225 1 Each
114 114 Preparation fof sub grade by dressing to camber (Earth work involved for cutting for sub grade to be paid for separately depending upon the classifications of soil complete as per HPPWD specificationsncluding carriage of all labour equipment and material to various location through all modes of transportation in all leads ifts and all incidental charges BI01010001010000000000000515BI0100001226 187 Per Square meter
115 115 Construction of sub grade with road roller including making good the undulation etc. with earth or quarry dust etc. and rerolling the sub grade with road roller complete. BI01010001010000000000000515BI0100001227 187 Per Square meter
116 116 Construction of gravel/soil-aggregate base by providing well graded material, spreading in uniform layers with Tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller to achieve the desired density, complete as per Technical Specifications Clause 402 BI01010001010000000000000515BI0100001228 18.7 Per cubic meter
117 117 Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504. BI01010001010000000000000515BI0100001229 187 Per Square meter
118 118 Providing and laying filter mediameter with granular crushed aggregates as per specification to a thickness of not less than 600 ( Six hundred) millimeter with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification. BI01010001010000000000000515BI0100001230 28.63 Per cubic meter
119 119 Providing weep holes in brick masonry /stone masonry, plain reinforced concrete abutment,wing wall, return wall with 100 ( One hundred) millimeter diameter PVC pipe extending through full width of structure with slope of 1(v):20 (H)( Ine vertical is to twenty horizontal) towards the drawing face complete as per technical specification clauses 614,709,1204.3.7 including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges BI01010001010000000000000515BI0100001231 58.4 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail