Construction Of Shed And Barricade For Digital Generator And Barbed Wire Fencing With Stone Chips For Sub-Station Area At Cmpdil Colony , Bhubaneswar

Tender Notice

Construction Of Shed And Barricade For Digital Generator And Barbed Wire Fencing With Stone Chips For Sub-Station Area At Cmpdil Colony , Bhubaneswar

Tender Details

Construction Of Shed And Barricade For Digital Generator And Barbed Wire Fencing With Stone Chips For Sub-Station Area At Cmpdil Colony , Bhubaneswar

Key Value

Document Fees
Refer document
INR 2500.00 /-
Tender Value
Refer document

BOQ Items

Name of the Work
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.\nAll kinds of soil BI01010001010000000000000515BI0100001113 2.31 Cum
2 2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :\n1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) 1.67 Cum
3 3 Making available electric/diesel welding machine with all required accesorries , consumables including all labour and material cost as directed by Engineer-in-charge 4 Per \nVisit
4 4 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 38.43 sqm
5 5 Applying priming coat:\nWith ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works 23.86 sqm
6 6 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :\nTwo or more coats on new work 49.19 sqm
7 7 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 681.04 Kg
8 8 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.\nUsing flats 30x6mm for diagonal braces and central cross piece 2.02 sqm
9 9 Providing and fixing L-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.\nFixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 17.49 Kg
10 10 Supplying and stacking at site.\n63 mm to 45 mm size stone aggregate 21.79 Cum
11 11 12 mm cement plaster of mix :\n1:6 (1 cement: 6 fine sand) 7.98 sqm
12 12 Miscellaneous services at transformer base area for differnet types of jobs to be done in carring, levelling, dressing, spreading or any miscellaneous work as per instruction of engineer incharge 10 days
13 13 Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:\nCement mortar 1:6 (1 cement : 6 coarse sand) 3.63 cum
14 14 Providing and Fixing fencing of horizontal and diagonal lines of barbed wire between two posts. BI01010001010000000000000515BI0100001126 16.14 Kg
15 15 Total impact of GST for the purpose of CTC BI01010001010000000000000515BI0100001129 1 Nos
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2020 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail