Supply Gym Materials To Maddigalli And Nadi Galli Smasahan And Math Galli Royal Colony Gym-Karnataka

Supply Gym Materials To Maddigalli And Nadi Galli Smasahan And Math Galli Royal Colony Gym 1. Tai Chi Wheel Supplying And Fixing Of Thi Chi Wheel. Metal: All Tubular Steel Of 2.5 Mm Thickness, Are Glavanized And Zinc Dipped. Joints Are Robotic Welded. All Welded Joints Are Scalloped As Necessary And Welded To An Approved Mig Process. All Welds Are Dressed Off Removing All Sharp Edges And Burrs. Zinc Primer Paint Is Applied At All The Welding Points Prior To Finishing. All Metal Parts Are To Be Tested In Salt Spray Machine That Uses A 5% Nacl Solution In Accordance To Iso7227 To Handle Corrosion For 3000 Hrs. Rubber High Quality Grip Rubber Is Used For The Handles. Bearings: Maintainance Free Ball Bearings. Scope Of Delivery: 1 Completely Pre-Assembled Equipment Model. Maintainance Products Must Be Tested And Certified To Meet En16630 Safety Standards With Gs International Certificates Must Be Issued By A Reputed Notified Mark En16630 Certificates Must Be In The Name Of Tendering Party And Not Any 3Rd Party. All Products Must Clearly Display The Gs Mark As Issued In The En 16630 Safety Certificates. Size_Lxwxh: 1120X1150x1620xmm(Min), Weight 39Kg (Min) Safety Area: 3520X3550 Mm(Min) Capacity_3 Persons., 2. Push And Pull Up Chairs: Supplying And Fixing Of Pull Up Chairs: All Tubular Steel Of 2.5 Mm Thickness Are Glavanized And Zinc Dipped. Joints Are Robotic Welded. All Welded Joints Are Scalloped As Necessary And Welded To An Approved Mig Process. All Welds Are Dressed Off Removing All Sharp Edges And Burrs. Zinc Primer Paint Is Applied At Alla The Welding Points Prior To Finishing. All Metal Parts Are Powder Coated Using Akzo Nobel-Great Wall Powder To The Thickness Pf 80-120 Microns. All Metal Parts Are To Be Tested In Salt Spray Machine That Uses A 5% Nacl Solution In Accoradance To Iso7227 To Handle Corrosion For 3000 Hrs. Rubber: High Quality Grip Rubber Is Used For The Hanldes. Bearing; Maintainance Free Ball Bearings. Scope Of Delivery: 1 Completely Pre Assembled Equipment Model. Maintainance: Maintain According To En 16630 And As Per The Maintainance Guide. Safety: All Products Must Be Tested And Certified To Meet En 16630 Safety Certificates. Size_Lxwxh; 2570X805x2685mm (Min). Weight; 85.4 Kg (Min) Safety Area; 6287X4848 Mm (Min), Capacity 2 Persons, 3. Cross Walker: Supplying & Fixing Of Cross Walker Metal: All Tubular Steel Of 2.5 Mm Thickness, Are Glavanized And Zinc Dipped. Joints Are Robotic Welded. All Welded Joints Are Scalloped As Necessary And Welded To Amn Approved Mig Process. All Welds Are Dressed Off Removing All Sharp Edges And Burrs. Zinc Primer Paint Is Applied At All The Welding Points Prior To Finishing. All Metal Parts Are Powder Coated Using Akzo Nobel-Great Wall Powder To The Thickness Of 80-120 Microns. All Metal Parts Are To Be Tested In Salt Spray Machine That Uses A 5% Nacl Solution In Accordance To Iso7227 To Handle Corrosion For 3000 Hrs. Rubber: High Quality Grip Rubber Is Used For The Handles. Bearing: Maintaince Free Ball Bearings. Maintain According To En 16630 And As Per The Maintainance Guide. Safety: All Products Must Be Tested And Certified To Meet En16630 Safety Standards With Gs Test Marks. The En 16630 Certificates Must Be Issued By A Reputed Nitified International Certifying Agency Such As Ipema,Tuv, Cpsc Or Sgs Size: Lxwxh:2015X615x1360 Mm (Min) Weight: 93Kg (Min) Safety Area: 5015 X 3015 Mm(Min), Capacity 2 Persons. Only. The Gs Marks En16630 Certificates Must Be In The Name Of Tendering Party And Not Any 3Rd Party. All Products Must Clearly Display The Gs Marks As Issued In The En 16630 Safety Certificates., 4. Ab Trainer/Sit-Up Bench: Supplying And Fixing Of Sit-Up Bench Metal: All Tubular Steel Of 2.5 Mm Thickness, Are Glavnized And Zinc Dipped. Joints Are Robotic Welded. All Welded Joints Are Scalloped As Necessary And Welded To An Approved Mig Process. All Welds Are Dressed Of Removing All Sharp Edges And Burrs. Zinc Primer Paint Is Applied At All The Welding Points Prior To Finishing. All Metal Parts Are Primer Paints Is Applied At All The Welding Points Prior To Finishing. All Metal Parts Are Powder Coated Using Akzo Nobel-Great Wall Powder To The Thickness Of 80-120 Microns. All Metal Parts Are To Be Tested In Salt Spray Machine That Uses A 5% Nacl Solution In Accordance To Iso7227 To Handle Corrosion For 3000 Hrs. Rubber: Highh Quality Grip Rubber Is Used For The Handles. Bearing: Maintainance Free Ball Bearings. Scope Of Delivery: 1 Completely Pre-Assemlbed Equipment Model. Maintainance Maintain According To En 16630 And As Per The Maintainance Guide. Safety Standards With Gs Test Mark. The En 16630 Certificates Must Be Issued By A Reputed Notified Internaltional Certificates Must Be In The Name Of Tendering Party And Not Any 3Rd Party. All Products Must Clearly Display The Gs Marks As Issued In The En 16630 Safety Certificates. Size- Lxwxh: 1412X1366x650 Mm(Min). Weight 42.6Kg (Min) Safety Area: 4462X4078 Mm(Min) Capacity 2 Person., 5. Waist Twister Triple: Supplying & Fixing Of Waist Twister. Metal: All Tubular Steel Of 2.5 Mm Thickness, Are Glavanized And Zinc Dipped. Joints Are Robotic Welded. All Welded Joints Are Scalloped As Necessary And Welded To An Approved Mig Process. All Welds Are Dressed Off Removing All Sharp Edges And Burrs. Zinc Primer Paints Is Applied At All Dressed Off Removing All Sharp Edges And Burrs. Zinc Primer Paint Is Applied At All The Welding Points Prior To Finishing. All Metal Parts Are Powder Coated Using Akzo Nobel-Great Wall Powder To The Thickness Pf 80-120 Microns. All Metal Parts Are To Be Tested In Salt Spray Machine That Uses A 5% Nacl Solution In Accoradance To Iso7227 To Handle Corrosion For 3000 Hrs. Rubber: High Quality Grip Rubber Is Used For The Hanldes. Bearing; Maintainance Free Ball Bearings. Scope Of Delivery: 1 Completely Pre Assembled Equipment Model. Maintainance: Maintain According To En 16630 And As Per The Maintainance Guide. Safety: All Products Must Be Tested And Certified To Meet En 16630 Safety Certificates. Size_Lxwxh: 1460X1310x1150mm(Min), Weight 39.1Kg (Min) Safety Area: 4360X4510 Mm(Min) Capacity_3 Persons., 6. Single Pole Setup Cycle: Supplying & Fixing Of Single Pole Setup Cucle. Metal: All Tubular Steel Of 2.5 Mm Thickness, Are Glavanized And Zinc Dipped. Joints Are Robotic Welded. All Welded Joints Are Scalloped As Necessary And Welded To An Approved Mig Process. All Welds Are Scalloped As Necessary And Welded To An Approved Mig Process. All Welds Are Dressed Off Removing All Sharp Edges And Burrs. Zinc Primer Paints Is Applied At All The Welding Points Prior To Finishing. All Metal Parts Are Powder Coated Using Akzo Nobel-Great Wall Powder To The Thickness Pf 80-120 Microns. All Metal Parts Are To Be Tested In Salt Spray Machine That Uses A 5% Nacl Solution In Accoradance To Iso7227 To Handle Corrosion For 3000 Hrs. Rubber: High Quality Grip Rubber Is Used For The Hanldes. Bearing; Maintainance Free Ball Bearings. Scope Of Delivery: 1 Completely Pre Assembled Equipment Model. Maintainance: Maintain According To En 16630 And As Per The Maintainance Guide. Safety: All Products Must Be Tested And Certified To Meet En 16630 Safety Certificates. Size_Lxwxh: 1000X498x1290mm(Min), Weight 51.5Kg (Min) Safety Area: 3400X3498 Mm(Min) Capacity_3 Persons., 7. Leg & Thigh Exercise/Air Walker Supplying & Fixing Of Air Walker . Metal: All Tubular Steel Of 2.5Mm Thickness, Are Glavanized And Zinc Dipped. Joints Are Robotic Welded Joints Are Scalloped As Necessary And Weled To An Approved Mig Process. All Welds Are The Welding Points Prior To Finishing. All Metal Parts Are Powder Coated Using Akzo Nobel-Great Wall Powder To The Thickness Of 80-120 Microns. All Metal Partsare To Be Teasted In Salt Spary Machine That Uses A 5% Macl Solution In Accordance To Iso7227 To Handle Corrosion For 3000 Hrs. Rubber: High Quality Grip Rubber Is Used For The Handles. Bearings: Maintainance Free Ball Bearings. Scope Of Delivery : 1 Completely Pre-Assembled Equipment Model. Maintainance: Products Must Be Tested And Certificates Must Be Issued By A Reputed Notified International Certifing Agency Such As Ipema, Tuv, Cpsc Or Sgs Only. The Gs Mark En16630 Certificates Must Be In The Name Of Tendering Party And Not Any 3Rd Party. All Products Must Clearly Display The Gs Marks As Issued In The En 16630 Safety Cerficates. Size- Lxwxh: 1065X615x1364 Mm(Min). Weight 51Kg (Min) Safety Area: 4090X3555 Mm(Min) Capacity 1 Person., 8. Seated Chest Press: Supplying And Fixing Of Seated Chest Press Metal: All Tubular Steel Of 2.5 Mm Thickness Are Glavanized And Zinc Dipped. Joints Are Robotic Welded. All Welded Joints Are Scalloped As Necessary And Welded To An Approved Mig Process. All Welds Are Dressed Off Removing All Sharp Edges And Burrs. Zinc Primer Paint Is Applied At All The Welding Points Prior To Finishing. All Metal Parts Are Powder Coated Using Akzo Nobel-Great Wall Powder To The Thickness Of 80-120 Microns. All Metal Parts Are To Be Tested In Salt Spray Machine That Uses A 5% Nacl Solution In Accordance To Iso7227 To Handles. Bearings : Maintainance Free Ball Maintainance: Maintain According To En 16630 Certificates To Meet En16630 Safety Standards With Gs Test Mark. The En 16630 Certificates Must Be Issued By A Reputed Notified International Certifying Agency Such As Ipema,Tuv, Cpsc Or Sgs Only. The Gs Mark En16630 Certificates Must Be In The Name Of Tendering Party And Not Any 3Rd Party. All Products Must Clearly Display The Gs Mark As Issued In The L X W X H:1955X733x2058 Mm (Min), Weight: 86.6 Kg(Min) Safety Area: 5545X4470 Mm(Min), Capacity 2 Person., 9. Leg & Thigh Exercise/Air Walker Supplying & Fixing Of Air Walker . Metal: All Tubular Steel Of 2.5Mm Thickness, Are Glavanized And Zinc Dipped. Joints Are Robotic Welded Joints Are Scalloped As Necessary And Weled To An Approved Mig Process. All Welds Are The Welding Points Prior To Finishing. All Metal Parts Are Powder Coated Using Akzo Nobel-Great Wall Powder To The Thickness Of 80-120 Microns. All Metal Partsare To Be Teasted In Salt Spary Machine That Uses A 5% Macl Solution In Accordance To Iso7227 To Handle Corrosion For 3000 Hrs. Rubber: High Quality Grip Rubber Is Used For The Handles. Bearings: Maintainance Free Ball Bearings. Scope Of Delivery : 1 Completely Pre-Assembled Equipment Model. Maintainance: Products Must Be Tested And Certificates Must Be Issued By A Reputed Notified International Certifing Agency Such As Ipema, Tuv, Cpsc Or Sgs Only. The Gs Mark En16630 Certificates Must Be In The Name Of Tendering Party And Not Any 3Rd Party. All Products Must Clearly Display The Gs Marks As Issued In The En 16630 Safety Cerficates. Size_Lxwxh; 2270X635x1640 Mm (Min). Weight; 60.2 Kg (Min) Safety Area; 5300X3685 Mm (Min), Capacity 2 Persons,

INR 550 /-

Refer document