Public Works Department-PWD has published Repair Of Administrative Building At Police Thana Mandawar. Submission Date for this Tender is 04-11-2020. Building Repair Tenders in Under Jurisdiction of Dn. Mahuwa Rajasthan. Bidders can get complete Tender details and download the document.
| NAME OF WORK : REPAIR OF ADMINISTRATIVE BUILDING AT POLICE THANA MANDAWAR | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Part-A Building Works\nEarth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils | BI01010001010000000000000515BI0100001113 | 56.3736 | Cum |
| 2 | 2 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix(with graded stone aggregate 40mm nominal size) | BI01010001010000000000000515BI0100001114 | 8.91804 | Cum |
| 3 | 3 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). | BI01010001010000000000000515BI0100001115 | 48.0198 | Cum |
| 4 | 4 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. | BI01010001010000000000000515BI0100001116 | 16.3504 | Sqm |
| 5 | 5 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. | BI01010001010000000000000515BI0100001117 | 28.5667 | Sqm |
| 6 | 6 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Design Mix (Using minimum 400 kg of cement per cum of concrete) | BI01010001010000000000000515BI0100001118 | 3.7356 | Cum |
| 7 | 7 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1 : 6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001119 | 20.185 | Cum |
| 8 | 8 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Design Mix (Using minimum 400 kg of cement per cum of concrete) | BI01010001010000000000000515BI0100001120 | 4.11447 | Cum |
| 9 | 9 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code) | BI01010001010000000000000515BI0100001121 | 524 | Kg |
| 10 | 10 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. | BI01010001010000000000000515BI0100001122 | 65.1183 | Cum |
| 11 | 11 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : | BI01010001010000000000000515BI0100001123 | 16.7683 | Rmt |
| 12 | 12 | Random rubble dry stone Kharanja under floor. | BI01010001010000000000000515BI0100001124 | 10.6726 | Cum |
| 13 | 13 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : :-12 mm thick | BI01010001010000000000000515BI0100001125 | 237.452 | Sqm |
| 14 | 14 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20mm thick . | BI01010001010000000000000515BI0100001126 | 208.7 | Sqm |
| 15 | 15 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 30 mm thick . Commercial Veneer both side. | BI01010001010000000000000515BI0100001127 | 1.3867 | Cum. |
| 16 | 16 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 guage Thickness, joint mitred welded and grinded including hold fast of lugs 13mmx 3mm and 15cm long embedded in C.C. block 15x10x10cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of approved quality,windows shutters made out of 50x25mm hollow steel section 15 mm paitam of 18 guage thickness, joint mitred and grinded including 10mmx10mm square bras welded to frame for paitam fixing float glass 4 mm thick panes with glazzing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100mm long, tower bolts 100mm long of steel powder coate superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer-incharge.\nWindows fixed. | BI01010001010000000000000515BI0100001128 | 13.3776 | Sqm. |
| 17 | 17 | Providing and fixing T-iron frames for doors windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs, 10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screw or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. | BI01010001010000000000000515BI0100001129 | 42 | Kg |
| 18 | 18 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' :30 mm thick . Decorative teak veneer One side | BI01010001010000000000000515BI0100001130 | 2.27605 | Sqm |
| 19 | 19 | Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete:12 mm | BI01010001010000000000000515BI0100001131 | 3.3528 | Rmt |
| 20 | 20 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). | BI01010001010000000000000515BI0100001132 | 15.8134 | Sqm |
| 21 | 21 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). | BI01010001010000000000000515BI0100001133 | 3.07592 | Sqm |
| 22 | 22 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)For area of each slab from 2001 to 5000 Sq.Cm | BI01010001010000000000000515BI0100001134 | 67.4231 | Sqm |
| 23 | 23 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 901 to 2000 Sq.Cm : | BI01010001010000000000000515BI0100001135 | 2.787 | Sqm |
| 24 | 24 | Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint | BI01010001010000000000000515BI0100001136 | 5.52755 | Sqm |
| 25 | 25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:New work (two or more coats) over and including scrapping and priming coat with cement primer. | BI01010001010000000000000515BI0100001137 | 446.152 | Sqm |
| 26 | 26 | Applying priming coat :With ready mix pink or gray primer of approved brand and manufacture on wood work hard and soft wood. | BI01010001010000000000000515BI0100001138 | 11.25 | Sqm |
| 27 | 27 | Applying priming coat :With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works | BI01010001010000000000000515BI0100001139 | 6.75 | Sqm |
| 28 | 28 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : \nTwo or more coats on new work | BI01010001010000000000000515BI0100001140 | 18 | Sqm |
| 29 | 29 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete.size 600 mm X 600 mm | BI01010001010000000000000515BI0100001141 | 16.2575 | Sqm |
| 30 | 30 | Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. | BI01010001010000000000000515BI0100001142 | 10.3632 | Rmt. |
| 31 | 31 | Providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled and glazed shutter 25 mm to 40 mm thickGhana wood grade IWire gauge 24 gauge 14 mesh of IS designation 85 gauge of dia 0.56 mm | BI01010001010000000000000515BI0100001143 | 4.5521 | Sqm |
| 32 | 32 | Part - B Sanatary Work\nP & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor | BI01010001010000000000000515BI0100001144 | 1 | No |
| 33 | 33 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: : Size 580x440 mm. | BI01010001010000000000000515BI0100001145 | 1 | No |
| 34 | 34 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. | BI01010001010000000000000515BI0100001146 | 15 | Mtr. |
| 35 | 35 | P & F Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : WVC with C.P. brass bend. | BI01010001010000000000000515BI0100001147 | 1 | No. |
| 36 | 36 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall : \nSize 580 mm x 450 mm | BI01010001010000000000000515BI0100001148 | 1 | Nos. |
| 37 | 37 | P & F Looking Mirrors with P.V.C. frame of approved (Atul, Modi Guard , Saint Gobin or equivalent) Size 500 x 400 mm | BI01010001010000000000000515BI0100001149 | 1 | Nos. |
| 38 | 38 | P&F Grating of approved quality/ make : Stainless steel sheet size 125mm dia Heavy quality of approved make | BI01010001010000000000000515BI0100001150 | 2 | Nos. |
| 39 | 39 | P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors : 15 mm dia nominal bore. B - Class | BI01010001010000000000000515BI0100001151 | 10 | Rmt |
| 40 | 40 | P & F G.I. Pipes (External work) with G.I. fittings (IS:1239 Mark) including trenching & refilling earth etc. 25 mm dia nominal bore. B - Class | BI01010001010000000000000515BI0100001152 | 5 | Rmt |
| 41 | 41 | P & F Pillar Cocks (IS:8934 Mark) of superior quality and approved make : C.P. Pillar cock, Swan-neck with casted spout, 15 mm nominal bore. | BI01010001010000000000000515BI0100001153 | 1 | Nos. |
| 42 | 42 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15 mm Brass (IS:8931 marked). | BI01010001010000000000000515BI0100001154 | 1 | Nos. |
| 43 | 43 | P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design 500 litres capacity. | BI01010001010000000000000515BI0100001155 | 2 | Nos. |
| 44 | 44 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 450 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.Depth up to 0.5 M | BI01010001010000000000000515BI0100001156 | 1 | Nos. |
| 45 | 45 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside size 450 X 450 mm depth upto 0.5 M Cement cover with frame. | BI01010001010000000000000515BI0100001157 | 1 | Nos. |
| 46 | 46 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: 110 mm dia | BI01010001010000000000000515BI0100001158 | ||
| 47 | 46.01 | Coupler (socket) | BI01010001010000000000000515BI0100001159 | 12 | No |
| 48 | 46.02 | Reducer 110 X 75 mm | BI01010001010000000000000515BI0100001160 | 6 | No |
| 49 | 46.03 | Plain Tee | BI01010001010000000000000515BI0100001161 | 6 | No |
| 50 | 46.04 | Door Tee | BI01010001010000000000000515BI0100001162 | 6 | No |
| 51 | 47 | P & F Bib Cock (IS:8931 Mark) Superior quality of approved make : Brass 400 grm, 15mm nominal bore. | BI01010001010000000000000515BI0100001163 | 4 | No. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
