| 1 | 1 | Excavation in trenches not exceeding 1.5m wide and n.exc. 1.5m in depth for laying of cable and foundation in hard/dense soil complete all as specified and directed. | Excavation in trenches not exceeding 1.5m wide and n.exc. 1.5m in depth for laying of cable and foundation in hard/dense soil complete all as specified and directed. | 40 | Cum |
|---|
| 2 | 2 | Returning filling in soil and well ramming in layers n. exc. 25cm including spreading, leveling and watering all as specified and directed. | Returning filling in and well ramming in layers n. exc. 25cm including spreading, leveling and watering all as specified and directed. | 20 | Cum |
|---|
| 3 | 3 | Removing excavated material (soil) and depositing at a distance not exceeding 50m where directed. | Removing excavated material (soil/rock) and depositing at a distance not exceeding 50m where directed. | 15 | Cum |
|---|
| 4 | 4 | Supplying and laying reinforced precast concrete cable cover, class EHV, type 1 with peak, size 450 mm × 230 mm × 50 mm and abutting each other with gap between adjacent precast concrete cable cover not exceeding 10 mm over underground cables for protection. | Supplying and laying reinforced precast concrete cable cover, class EHV, type 1 with peak, size 450 mm × 230 mm × 50 mm and abutting each other with gap between adjacent precast concrete cable cover not exceeding 10 mm over underground cables for protection. | 250 | Each |
|---|
| 5 | 5 | M&L for screened un-washed river sand cushioning to U/G cable for cushioning 8cm below the cable and 15cm above cable all as specified and directed. Note: Thickness shall be considered after consolidation as per SSR. | M&L for screened un-washed river sand cushioning to U/G cable for cushioning 8cm below the cable and 15cm above cable all as specified and directed. | 8 | Cum |
|---|
| 6 | 6 | M&L for Motorized Auguring/ Driling /Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machaine, including HDPE pipe of 100 mm bore dia complete all as specified and directd by EIC. Note : Contractor visit the site before quote the rate. | M&L for Motorized Auguring/ Driling /Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machaine, including HDPE pipe of 100 mm bore dia complete all as specified and directd by EIC. Note : Contractor visit the site before quote the rate. | 10 | RM |
|---|
| 7 | 7 | Supply, fix and replacement of XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty with aluminium conductor 33000V volts grade cross sectional 185 sq mm 3.0 core, laid in trenches/ducts /encased in GI pipe /fixed to pole including taking out of existing unserviceable OH conductor all as specified and directed. | Supply, fix and replacement of XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty with aluminium conductor 33000V volts grade cross sectional 185 sq mm 3.0 core, laid in trenches/ducts /encased in GI pipe /fixed to pole including taking out of existing unserviceable OH conductor all as specified and directed. Make : Havells/Finolex/Polycab. | 250 | RM |
|---|
| 8 | 8 | Material and labour for earthing strip, galvanised iron strip 32× 6 mm, burried in ground or fixed to pole etc as specified and directed. Earth work if required shall be measured against respective item) | Material and labour for earthing strip, galvanised iron strip 32× 6 mm, burried in ground or fixed to pole etc as specified and directed. Earth work if required shall be measured against respective item) | 30 | RM |
|---|
| 9 | 9 | Dismantling of Unserviceable steel structure, cross arms, bracings, supports, clamps from two/four pole structure at various locations all as directed. | Dismantling of Unserviceable steel structure, cross arms, bracings, supports, clamps from two/four pole structure at various locations all as directed. | 7 | Qtl |
|---|
| 10 | 10 | Supplying, fabricating & fixing structural mild steel channel, angle iron, flat iron and brackets etc for fabrication of cross arms, bracings, supports, D-clamps, stiffeners, eye hooks, bolts, pole clamps and plates including nuts, bolts and washers, welding cold or hot drilling holes for insulators bolts in any shape or size, and febrication of 33 KV tower as per existing height as indicated or directed and inclusive of one red oxide prime coat, one under coat and one finishing coat of aluminium paint complete (Insulators to be measured and paid for separately under respective items). | Supplying, fabricating & fixing structural mild steel channel, angle iron, flat iron and brackets etc for fabrication of cross arms, bracings, supports, D-clamps, stiffeners, eye hooks, bolts, pole clamps and plates including nuts, bolts and washers, welding cold or hot drilling holes for insulators bolts in any shape or size, and febrication of 33 KV tower as per existing height as indicated or directed and inclusive of one red oxide prime coat, one under coat and one finishing coat of aluminium paint complete (Insulators to be measured and paid for separately under respective items). | 7 | Qtl |
|---|
| 11 | 11 | Supply and fix switch air break gang operated triple pole mechanically operated mounted on insulator (09 insulators)& steel frame with operating mechanism including spring loaded mechanism set of three working from ground level, including locking arrangement of Current rating up to 400 Amps (Horizontal type), 33000 volt. | Supply and fix switch air break gang operated triple pole mechanically operated mounted on insulator (09 insulators)& steel frame with operating mechanism including spring loaded mechanism set of three working from ground level, including locking arrangement of Current rating up to 400 Amps (Horizontal type), 33000 volt. Make : BHEL/Pactil/Rastriya/JB | 3 | Each Job |
|---|
| 12 | 12 | Supply and fix in replacement swing out expulsion fuse assembly single pole (drop out fuse) set of three for 33000 Volts of cap. 200 Amps complete with MS channel, post insulators etc all as specified. | Supply and fix in replacement swing out expulsion fuse assembly single pole (drop out fuse) set of three for 33000 Volts of cap. 200 Amps complete with MS channel, post insulators etc all as specified. Make : BHEL/Pactil/JB | 5 | Each Job |
|---|
| 13 | 13 | M&L for GI tubing light grade (ISI marked) with all fitting/accessories for protection of cable on pole/wall and under road crosing including claps, nut bolt etc all as specified and directed of size 100mm. | M&L for GI tubing light grade (ISI marked) with all fitting/accessories for protection of cable on pole/wall and under road crosing including claps, nut bolt etc all as specified and directed of size 100mm. | 12 | RM |
|---|
| 14 | 14 | All as per Item No 13 above but 150 mm dia | All as per Item No 13 above but150 mm dia | 24 | RM |
|---|
| 15 | 15 | Material and labour in replacement of unserviceable end jointing kit, outdoor type heat shinkable 120 to 185 sqmm 3 core suitable for 33 KV 3 core, XLPE insulated electric power cable complete all as specified and directed. Note:- Earth work for joints required shall be measured against respective item | Material and labour in replacement of unserviceable end jointing kit, outdoor type heat shinkable 120 to 185 sqmm 3 core suitable for 33 KV 3 core, XLPE insulated electric power cable complete all as specified and directed. Make : Raychem, 3M, M-seal Note:- Earth work for joints required shall be measured against respective item | 8 | Each |
|---|
| 16 | 16 | All as per Item No 15 above but indoor type. | -Ditto- but indoor type - ditto-. | 3 | Each |
|---|
| 17 | 17 | All as per Item No 15 above but straight through cable joint | -Ditto- but straight through cable joint - ditto-. | 2 | Each |
|---|
| 18 | 18 | Material and labour Cement concrete (1:3:6) type C -1 using 20 mm graded stone aggregate for pedestal of poles/copping including necessary form work ,fair finishing to exposed surfaces using extra cement complete form, all as directed by EIC. | Material and labour Cement concrete (1:3:6) type C -1 using 20 mm graded stone aggregate for pedestal of poles/copping including necessary frame work ,fair finishing to exposed surfaces using extra cement complete form, all as directed by EIC. | 1 | Cum |
|---|
| 19 | 19 | Material and labour for Cement concrete (1:3:6) type C -2 using 40 mm graded stone aggregate for foundation of pole /struts/stay assembly etc complete all as directed by EIC. | Material and labour for Cement concrete (1:3:6) type C -2 using 40 mm graded stone aggregate for foundation of pole /struts/stay assembly etc complete all as directed by EIC. | 4 | Cum |
|---|
| 20 | 20 | Supply, fixing & stringing of ACSR conductor on poles with jumpering and binding with aluminium conductors and in yards with and incl aluminium connectors of required shape and suitable for conductor size complete all as specified and directed by Engr-in-Charge. | Supply, fixing & stringing of ACSR conductor on poles with jumpering and binding with aluminium conductors and in yards with and incl aluminium connectors of required shape and suitable for conductor size complete all as specified and directed by Engr-in-Charge. | 1 | Qtl |
|---|
| 21 | 21 | Supply and fixing in replacement of Danger notice plate HT 33000 volts of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size of 25 × 20 cm size including complete fixing arrangement with iron strip 25 mm× 3 mm with nut, bolts and paints etc complete all as specified and directed by Engr-in-Charge. | Supply and fixing in replacement of Danger notice plate HT 33000 volts of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size of 25 × 20 cm size including complete fixing arrangement with iron strip 25 mm× 3 mm with nut, bolts and paints etc complete all as specified and directed by Engr-in-Charge. | 10 | Each |
|---|
| 22 | 22 | M&L for Earthing complete with galvanized steel earth plate electrodes 600x600x6 mm thick buried directly in ground earth (earth pit not less 2.25 m deep below ground level) with top edge of the plate not less then 1.5 mtr below normal ground level connected to galvanised iron earthing strip 32mm x6mm thick by means of bolt nuts check nuts and washers of galvanized iron or steel all as specified & shown in electrical plate No.3 of MES SSR part-I 2009 connected to earth test point as specified and testing on completion including provision of 40 mm dia light grade pipe up to 7.5 mtr length as protection & watering pipe shall be 20 mm bore medium grade including all excavation & earth work in any type of soil incl PCC pit (1:3:6) type C-1 with RCC cover including charcoal , salt, funnel, all as directed at site. NOTE:- Rate included for excavation & earth work in any type of strata as shown in electrical plate No 3. in SSR Part-I | M&L for Earthing complete with galvanized steel earth plate electrodes 600x600x6 mm thick buried directly in ground earth (earth pit not less 2.25 m deep below ground level) with top edge of the plate not less then 1.5 mtr below normal ground level connected to galvanised iron earthing strip 32mm x6mm thick by means of bolt nuts check nuts and washers of galvanized iron or steel all as specified & shown in electrical plate No.3 of MES SSR part-I 2009 connected to earth test point as specified and testing on completion including provision of 40 mm dia light grade pipe up to 7.5 mtr length as protection & watering pipe shall be 20 mm bore medium grade including all excavation & earth work in any type of soil incl PCC pit (1:3:6) type C-1 with RCC cover including charcoal , salt, funnel, all as directed at site. NOTE:- Rate included for excavation & earth work in any type of strata as shown in electrical plate No 3. in SSR Part-I | 12 | Each |
|---|
