Military Engineer Services-MES has published Provision Of Lpg Cylinder Godown With Allied Services And Work In Bldg No . P-13 Cook House With Certain Mw At Lgj Mil Stn. Submission Date for this Tender is 17-11-2020. Godown Tenders in GE Lalgarh Jattan Rajasthan. Bidders can get complete Tender details and download the document.
Name of Work: PROVN OF LPG CYLINDER GODOWN WITH ALLIED SERVICES AND WORK IN BLDG NO. P-13 COOK HOUSE WITH CERTAIN MW AT LGJ MIL STN | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | B/R Portion\nExcavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. and getting out hard/dense soil complete all as specified and directed by Engr-in-charge. | 110 | Cum | |
2 | 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth laying water main pipe / cable and getting out soft/loose soil complete all as specified and directed by Engr-in-charge. | 63.24 | Cum | |
3 | 3 | M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation bedding for electric pole etc. complete all as specified and as directed by Engr-in-charge | 24.5 | Cum | |
4 | 4 | M&L for brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed by Engr-in-charge. | 168.6 | Cum | |
5 | 5 | M&L for damp proof course 20mm thick in CM 1:2 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed by Engineer-in-charge. | 17 | Sqm | |
6 | 6 | Returning & filling in including sprading levelling, watering & well ramming in layers n.exc.1.5 mtr above starting point in soil complete all as specified and as directed by Engineer-in-charge. | 70 | Cum | |
7 | 7 | Removing the excavated material (soil) upto a distance n.exc.50 mtr & depositing where directed a level n.exc. 1.5 mtr above the starting point complete all as specified and as directed by Engr-in-charge | 97.2 | Cum | |
8 | 8 | M&L for sand filling in floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-charge. | 16 | Cum | |
9 | 9 | M&L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc.15cm thick,watered and rammed to a true surface in Broken stone or boulders (15cm compacted thickness) complete all as specified and directed by Engineer-in-charge. | 18 | Cum | |
10 | 10 | M&L for 100mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base below floors all specified and directed. | 117 | Sqm | |
11 | 11 | M&L for 25 mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregates as in floor finish complete all as specified and directed by Engr-in-charge. | 117 | Sqm | |
12 | 12 | M&L for 25 mm thick bituminous mastic flooring as per IS 1195-1196 complete all as specified and directed by Engr-in-charge. | 85 | Sqm | |
13 | 13 | M&L rendering 15mm thick on fair face of brick work or concrete surfaces in cement mortar 1:4 on wall finished even and fair with WPC complete all as specified and directed by Engr-in-charge.\nNote : - (WPC shall be measured and paid seperately) | 715 | Sqm | |
14 | 14 | M&L for 3 coats of white wash on newly / old plastered surfaces incl preparation etc. on wall complete all as specified and directed by Engr-in-charge. | 308 | Sqm | |
15 | 15 | M&L for 3 coats of white wash on newly / old plastered surfaces incl preparation etc. on ceiling complete all as specified and directed by Engr-in-charge. | 54 | Sqm | |
16 | 16 | M&L for two coats of cement base paint on newly / old plastered surfaces incl preparation etc. on wall complete all as specified and directed by Engr-in-charge. | 747 | Sqm | |
17 | 17 | Supply only integral water proofing compound complete all as directed by Engr-in-charge.\n | 166 | Kg | |
18 | 18 | S&F Steel work in tubular / hollow section in trusses, rafter, purline, post etc. including special shaped washer, plate, cleat, etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified & directed by Engineer-in-charge . | 960 | Kg | |
19 | 19 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified & directed by Engineer-in-charge . | 130 | Sqm | |
20 | 20 | Supply and fixing steel ventilator with top hung shutter including hinges steel peg stay, complete all as specified and directed by Engineer-in-Charge. | 13 | Sqm | |
21 | 21 | S&F steel door including projecting type hinges, steel handle complete with glazing bars, dovetailed or welded complete all as specified and directed by Engineer-in-Charge. | 13 | Sqm | |
22 | 22 | Supply & fixing, factory made steel windows all as per IS 1038/83, with side hung shutters including box type hinges, MS handle, peg stay, 02 Nos MS tower bolt 100mm long for each leaf complete with glazing bars dovetailed or welded, including cutting holes in brick wall, fixing in PCC (1:2:4 type B-1 and making good complete all as specified & directed by Engineer-in-Charge. | 6 | Sqm | |
23 | 23 | S&F stainless steel wire cloth 0.63 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified & directed by Engr-in-Charge. | 11 | Sqm | |
24 | 24 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc. 0.5 Sqm in each pane complete all as specified & directed by Engineer-in- charge. | 6 | Sqm | |
25 | 25 | Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed by Engineer-in- charge. | 24 | Sqm | |
26 | 26 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-charge. | 5.5 | RM | |
27 | 27 | S&F factory made solid PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails frame shall be covered with heat moulded plain coloured PVC `C' channel having a PVC sheet strip of 20 mm width stuck and plain colour PVC sheets for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame complete all as specified and directed by Engineer-in-charge. | 2.4 | Sqm | |
28 | 28 | S&F 100 mm long butt hinge, extruded aluminium alloy with galvanised mild steel hinge pin, anosied and fixed type B-21 complete all as specified & directed by Engr-in-Charge. | 18 | Each | |
29 | 29 | S&F 200 mm long aluminium anodised barrel tower bolt, of extruded sections complete all as specified & directed by Engr-in-Charge. | 12 | Each | |
30 | 30 | S&F 150 mm long aluminium anodised handle, cast type complete all as specified & directed by Engr-in-Charge. | 12 | Each | |
31 | 31 | M&L Light shade virified ceramic tiles 10 mm thick light shade (square/rectanular) polished area of each tile is 0.36sqm, in floors, walls etc set and jointed in neat cement and pointed in white or coloured cement to match the floor over and including 15 mm thick screed bed or bedding layers in CM 1:4 complete all as specified and directed by Engineer-in-Charge. | 18 | Sqm | |
32 | 32 | M&L for joint free glazed ceramic coloured tiles of size 350 X 250 X 7 mm / 450 x 300 x 7 mm thick on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and directed by Engr-in-charge. | 62 | Sqm | |
33 | 33 | Supply and fixing vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor complete all as specified and directed by Engineering-in-Charge. | 1 | Each | |
34 | 34 | S&F vitreous china wash hand basin coloured Flat back of size 580x450mm, long screwed shank fly nut flange end including cutting for and pinning in ends of brackets in 1:3 CM including 32mm dia chromium plated waste coupling/trap complete all as specified & directed by Engr-in-Charge. | 1 | Each | |
35 | 35 | Supply and fixing 10 liters capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet ball valve, float, handle and telescopic pipe and connection to pipe including brackets and 32mm dia PVC flush pipe, PVC connection 600mm long with PTMT nuts suitable for 15mm bore pipe complete all as specified and directed by Engineering-in-Charge. | 1 | Each | |
36 | 36 | S&F 15 mm dia stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified & directed by Engr-in-Charge. | 3 | Each | |
37 | 37 | S&F 15mm bore pillar tap, cast copper alloy with capston head, screwed down high pressure with or without lettered with long screwed shank and fly nuts, screwed for iron pipe of 15 mm bore complete all as specified & directed by Engr-in-Charge.\nNote : Minimum Wt should not be less than 450 gms | 1 | Each | |
38 | 38 | S&F bib tap 15mm bore cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified & directed by Engr-in-Charge. | 2 | Each | |
39 | 39 | S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified & directed by Engr-in-Charge. | 2 | Each | |
40 | 40 | S&F looking mirror of selected quality of size 600 mm X 450 mm with bevelled edge, 5.5 mm to 6 mm thick selected quality glass flaw less, firmly mounted 6 mm thick commercial plywood backing with 1st class hard wood decorative beading above inclusive necessary fixing arrangements complete all as specified & directed by Engr-in-Charge. | 1 | Each | |
41 | 41 | S&F 15mm dia Galvanised iron tubes medium grade with all fittings and fixed complete to wall & ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge | 27 | RM | |
42 | 42 | S&F 20mm dia Galvanised iron tubes medium grade with all fittings and fixed complete to wall & ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge | 55 | RM | |
43 | 43 | S&F rotational moulded polythene water storage tank 500 ltr capacity (ISI Marked) vertical with closed top hoisted and fixed in position all as specified in SSR Part - I all as directed. | 1 | Each | |
44 | 44 | Supply and fixing Vitreous China bowl Urinal flat back, size of 465 X 355 X 265 mm white colour with grating and union for discharge pipe and fixed complete all as specified and directed by Engineering-in-Charge. | 1 | Each | |
45 | 45 | S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20mm bore complete all as specified and as approved by GE/Engineer-in-Charge. | 4 | Each | |
46 | 46 | S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 25mm bore complete all as specified and as approved by GE/Engineer-in-Charge. | 1 | Each | |
47 | 47 | S&F framed work as in chowkats of doors windows of angle iron, gates or other section with gusset plates, rails, braces etc (Fe 290 grade E-165) complete to be prepared to hanging of door including welding work as required complete all as specified and directed by Engineer-in-Charge. | 56 | Kg | |
48 | 48 | Supply & fixing factory made plain framed panelled shutters (two panels) 35mm thick of 2nd class hard wood with lock rail and panel inserts of 12mm thick veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified & directed by Engineer-in- charge. \nNote : - (i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item (painting) of BOQ. | 5 | Sqm | |
49 | 49 | Supply & fixing factory made glazed and skeleton shutter (two panels), 35mm thick of 2nd class hard wood (Hollock / Bonsom) open rebated and prepared to receive glass, gauge etc, without sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. Sizes of members as specified in SSR Part-I, Section 8.20 (a) and fitted to chowkhats complete all as specified & directed by Engineer-in- charge. \nNote : - (i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item of BOQ. | 5 | Sqm | |
50 | 50 | S&F for 300mm long aluminium alloy, anodised, sliding door bolt type, not less than 16mm dia with and including bolts and nuts fixed complete all as specified & directed by Engr-in-Charge. | 3 | Each | |
51 | 51 | Supply & fixing in replacement Angle cock with flange with flange fancy type, cast copper alloy, chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union, size 15mm bore complete all as specified & directed by Engineer-in-charge. \nNote :- The minimum weight of stop valve shall be as given in SSR or in relevant IS. | 3 | Each | |
52 | 52 | S&F 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls complete all as specified and directed by Engineer-in-charge. | 8 | RM | |
53 | 53 | S&F 75 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls complete all as specified and directed by Engineer-in-charge. | 6 | Each | |
54 | 54 | S&F 110 mm dia PVC (SWR) bend any radius complete all as specified and directed by Engineer-in-charge. | 1 | Each | |
55 | 55 | S&F 75 mm dia PVC (SWR) bend with access door any radius complete all as specified and directed by Engineer-in-charge. | 2 | Each | |
56 | 56 | S&F 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal with access door any radius complete all as specified and directed by Engineer-in-charge. | 1 | Each | |
57 | 57 | S&F 110 mm dia PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-charge. | 1 | Each | |
58 | 58 | S&F PVC (SWR) floor trap, 75 mm dia with grating including jointing with solvent cement etc complete all as specified and directed by Engineer-in-charge. | 2 | Each | |
59 | 59 | M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed by Engineer-in-charge. | 2 | Each | |
60 | 60 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed by Engr-in-charge. | 116 | Sqm | |
61 | 61 | M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and directed by Engr-in-charge. | 83 | Sqm | |
62 | 62 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-charge. | 51 | Sqm | |
63 | 63 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engr-in-charge. | 8 | RM | |
64 | 64 | Taking down cement / cement lime plaster of any description from brick or brick walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. | 132 | Sqm | |
65 | 65 | M&L for rendering, 15 mm thick on brick work or concrete surfaces in cement mortar 1:6 on wall finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. | 88 | Sqm | |
66 | 66 | M&L for rendering, 10 mm thick on brick work or concrete surfaces in cement mortar 1:4 on ceiling finished even and fair complete all as specified and directed by Engr-in-charge. | 284 | Sqm | |
67 | 67 | Taking down 15 mm dia steel GI tubing including all connected fittings of any dia and in any position including cleaning for re fixing the serviceable pipe complete all as specified & directed by Engr-in-Charge. | 11 | RM | |
68 | 68 | ,---ditto--- all as per serial item No 127 above but 20mm dia pipe complete all as specified & directed by Engr-in-Charge. | 10 | RM | |
69 | 69 | M&L preparation of old painted / previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint (1st quality) of approved tint/colour to achieve glossing finish complete all as specified & directed by Engineer-in-charge . | 40 | Sqm | |
70 | 70 | M&L preparation of old painted / previously untreated steel surface of any description not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint (1st quality) of approved tint/colour to achieve glossing finish complete all as specified & directed by Engineer-in-charge . | 26 | Sqm | |
71 | 71 | Supply & fixing in replacement Angle cock / stop cock with flange fancy type, cast copper alloy, chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union, size 15mm bore complete all as specified & directed by Engineer-in-charge. \nNote :- The minimum weight of stop valve shall be as given in SSR or in relevant IS. | 2 | Each | |
72 | 72 | S&F in replacement stop valve fancy type 15 mm bore cast copper alloy, chromium plated with long shank and cup (Concealed type) screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unioun complete all as specified & directed by Engr-in-Charge.\nNote :- The minimum weight of tap shall be as given in SSR or in relevant IS. | 1 | Each | |
73 | 73 | S&F in replacement bib tap , fancy type, cast copper alloy, chromium plated with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule & fixed suitable for 15 mm bore iron pipe complete all as specified & directed by Engr-in-Charge.\nNote :- The minimum weight of tap valve shall be as given in SSR or in relevant IS. | 1 | Each | |
74 | 74 | M & L for 18/19mm thick prelaminated partcle board exterior grade prelaminated both side with decorative choice lamination & other side balancing with lamination fixed with screws including 6mm thick teak wood lipping fixed with head less nails/screws as in cupboard shutters and similar work and including two coat of synthetic enamel paint over a coat of red oxide primer on beading surfaces complete all as specified & directed by Engr-in-Charge. | 17 | Sqm | |
75 | 75 | S&F 125mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed by Engr-in-Charge. | 12 | Each | |
76 | 76 | S&F continous (piano) hinges, mild steel, bright finish or electrogalvanised (width of flapswhen open 30mm ) complete all as specified & directed by Engr-in-Charge. | 16 | RM | |
77 | 77 | S&F 125 mm long aluminium anodised handle, cast type complete all as specified & directed by Engr-in-Charge. | 8 | Each | |
78 | 78 | S&F in replacement sinks with drainage board made of stainless steel 1 mm thick for kitchen or laboratory with plugs, washers and wastes and PVC corrugated waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm x 460 mm bowl size 405 mm x 354 mm x 203mm complete all as specified and directed by Engineer-in-charge. | 1 | Each | |
79 | 79 | Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified & directed by Engineer-in-charge . | 8.5 | Cum | |
80 | 80 | Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete and new work built in CM 1:6, complete all as specified & directed by Engineer-in-charge . | 42 | Sqm | |
81 | 81 | S&F frameless toughened glass 12 mm thick decorative type door customized design transparent/hatched including all stainless steel fittings & handles, locking arrangements complete all as specified & directed by Engineer-in-charge . | 32.2 | Sqm | |
82 | 82 | Supply and laying DWCPE (SN8) drain pipes 150mm inner dia as per IS-16098 (Part-II), laid in trenches on moorum bed to required slope, including all assessories / fittings, jointing and tested complete all as specified and as directed by Engineer-in-Charge.\nMake :- Kamboj polythene Ltd ludhiana, Aspra, industries Delhi | 25 | RM | |
83 | 83 | M&L for moorum bed to drain pipes, spread, levelled and rammed including watering complete all as specified and directed by Engineer-in-Charge. | 2 | Cum | |
84 | 84 | M&L for RCC M15 (1:2:4) type B1 using 20mm graded stone aggregate in cover slabs (for manholes etc,) and placing in position including necessary form work complete all as specified and directed by Engineer-in-Charge.\nNote : Reinforcement shall be measured and paid seperately | 0.5 | Cum | |
85 | 85 | S&F mild steel TMT bars (Fe500D) 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clip complete all as specified and directed by Engr-in-charge. | 30 | Kg | |
86 | 86 | M&L for Cement concrete 1:3:6 type C–1 (using 20mm graded crushed stone aggregate) as in surface channel & drain (Benching) complete all as specified and directed by Engineer - in - Charge. | 0.5 | Cum | |
87 | 87 | M&L cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in coping over manhole finished even and smooth without using extra cement including necessary formwork complete all as specified and directed by Engr-in-charge. | 0.25 | Cum | |
88 | 88 | M&L for Cement concrete 1:3:6 type C–1 using 20mm graded crushed stone aggregate as in coping including form work complete all as specified and directed by Engineer - in - Charge. | 12.5 | Cum | |
89 | 89 | E/M Portion\nM&L for concealed Point wiring with two single core PVC insulate, unsheathed multistranded copper conductor cable of size 1.5 sq.mm (FRLS) drawn in and including electrical grade PVC conduit 20 mm dia concealed on wall/ceiling/floor including PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FRLS) including MS shunk sheet metal box with 3 mm thick hylam sheet top cover of required size for mounting switches, sockets etc for One Light/ fan point controlled by one, one way switch complete all as specified & directed by Engineer-in-charge . | 12 | Point | |
90 | 90 | ,---ditto--- all as per serial item No 127 above but One 3 pin switch socket outlet, 5 Amp on the same board with other switches complete all as specified & directed by Engr-in-Charge. | 2 | Point | |
91 | 91 | ,---ditto--- all as per serial item No 127 above but One 3 pin 5 amps switch socket outlet point on independent board complete all as specified & directed by Engr-in-Charge. | 5 | Point | |
92 | 92 | ,---ditto--- all as per serial item No 127 above but wiring with 4 sq.mm multistranded cable and earth wire with copper conductor of size 2.5 sq.mm for 15 amps power point complete all as specified & directed by Engr-in-Charge. | 1 | Point | |
93 | 93 | Supply and fix piano switch flush button single pole one way 5 Amps complete all as specified & directed by Engr-in-Charge. | 19 | Each | |
94 | 94 | Supply and fix piano socket 2 in 1, 2/3 pin 6 amp flush type 250 volts AC complete all as specified & directed by Engr-in-Charge. | 7 | Each | |
95 | 95 | Supply and fix piano socket 2 in 1, 3 pin 5 amp and 15 amp flush type 240 volts AC complete all as specified & directed by Engr-in-Charge. | 1 | Each | |
96 | 96 | Supply and fix piano switch 15 amp flush type 240 volts AC complete all as specified & directed by Engr-in-Charge. | 1 | Each | |
97 | 97 | S & F LED light fitting 1 x 18/20 W, 230 V integral sleek polycarbonate LED Channel with white acrylic cover incl making connectioncomplete all as specified & directed by Engr-in-Charge. | 6 | Each | |
98 | 98 | Supply and fix lamp holder insulated body with back plate for angle/batten fitting with LED of 09 watt complete all as specified & directed by Engr-in-Charge. | 1 | Each | |
99 | 99 | Supply and fix ceiling rose surface bakelite two to three terminals/plate 5 amps complete all as specified & directed by Engr-in-Charge. | 10 | Each | |
100 | 100 | Supply and fix sheet metal enclosure DB single pole and neutral for 240 volts 8 way with 200 Amps rated busbar flush/surface mounting double door including wooden board complete all as specified & directed by Engr-in-Charge. | 1 | Each | |
101 | 101 | Supply and fix MCB single pole 240 volt 6-32 amps 10 KA, complete all as specified & directed by Engr-in-Charge. | 6 | Each | |
102 | 102 | Supply and fix MCB SPN 240 volt 32 amp 10KA complete all as specified & directed by Engr-in-Charge. | 1 | Each | |
103 | 103 | Earthing complete with galvanised steel earth plate electrode 600mmx600mmx6 mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts, check nuts and washers complete including earthing pit, Chemical compound, Earthing lead up to 7.5 m, 20 mm dia medium grade GI watering pipe, G.I. protection pipe 40mm dia eath pit in PCC 1:2:4 type B-1 using 20 mm graded stone agggragate RCC pit cover including earth work complete all as shown electrical palte No-5 of SSR-2009 (Part-I) \nNOTE:- The unit rate shall include for excavation & earth work in any type of soil/strata, PCC 1:2:4 type B-I for pit & RCC 1:2:4 type B-I for cover with 8mm dia CTD Bar @150mm C/C both way, funnel with watering pipe 20 mm dia medium grade, 15mm dia light grade GI pipe up to 7.5 mtr long, wiremesh complete all as specified & directed by Engr-in-Charge. | 1 | Each | |
104 | 104 | Material & Labour for Sub Main Wiring with two run single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable size with and including 4 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. Note :- Two run of 6 sq.mm & One run of 4 sq.mm & One run of PVC conduit with accessories shall be measured as One length. | 20 | RM | |
105 | 105 | Supply and fix exhaust fan 300 mm sweep working on 230 V AC supply complete with louvers complete all as specified & directed by Engr-in-Charge. | 1 | Each | |
106 | 106 | S&F in replacement GI tubes 25 mm bore medium grade galvanised with all fittings laid in trenches complete all as specified & directed by Engr-in-Charge. | 80 | RM | |
107 | 107 | Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified & directed by Engr-in-Charge. | 70 | RM | |
108 | 108 | M&L for natural dry sand cushioning for cable protection complete all as specified and as directed by Engr-in-charge | 5 | CUM | |
109 | 109 | M&L brick protection with sub class'B' brick laid flat across the cable complete all as specified & directed by Engr-in-Charge. | 0.48 | per 1000 | |
110 | 110 | S & F LED Street light 25 watt made of pressure dicast aluminium housing with high power LED as lighting source and lens ambedded PC cover having top opening seprate driver compartment with IP 66 protection and impact resistance of IK07 with complete all as specified & directed by Engr-in-Charge.\nMake- As approved by GE | 2 | Each | |
111 | 111 | Supply and fixing in replacement brackets made out of GI tubing light grade 40mm dia, 1.5 metre long bent to shape at 120 degree angle at half metre from bottom (as per sample), fixing on poles/walls for street light fitting including before fixing applying two coats of aluminium paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-charge. Note :- Clamps and nut bolts for fixing as required shall be measured and paid separately under appropriate item. | 2 | Each | |
112 | 112 | Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail