| 1 | 1 | Dismantiling of floor, hearth or wall tiling including cement mortar bedding (but not baking), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed. | | 342 | Sqm |
|---|
| 2 | 2 | M & L for vitrified ceramic light shade tiles 8-10mm thick (square or rectangular) polished area of each tile not exc.0 .36 sqm in floor and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade complete laid over 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed. | | 150 | Per Sqm |
|---|
| 3 | 3 | ....ditto as above but for skiting/dado over 10mm thick screed bed layer of cement mortar (1:4) .....ditto..... | | 15 | Per Sqm |
|---|
| 4 | 4 | M&L non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile (400 x 400)mm in floors coloured tiles etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc laid over screed bed or bedding layer of mortar CM (1:6) , 15mm thick ,complete all as specified and directed. | | 30 | Sqm |
|---|
| 5 | 5 | M&L glazed ceramic coloured tiles 350 x 250 x 7 mm th/450 x 350 x 7 mm th thick as in vertical surfaces set and jointed in neat cement slurry and jointed or coloured cement to match etc complete laid over screed bed or bedding layer of mortar CM (1:6) , 15mm thick ,all as specified and directed. | | 50 | Sqm |
|---|
| 6 | 6 | M&L for 20mm thick granite stone of colour as approved table rubbed & polished laid, bedded, set and joointed in neat grey cement slurry in plate forms etc and pointed with white cement including cutting made to required shape and edges round shape as required and design etc complete all as specified and directed. | | 2 | Sqm |
|---|
| 7 | 7 | M&L 20-25 mm th machine cut kota stone slab as in flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, over 20 mm th screed or bedding layer in CM 1:4 all as specified and directed. | | 65 | Sqm |
|---|
| 8 | 8 | M&L Coloured Chequered cement concrete tiles 25cm x 25cm x 25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in paving/path etc over 20 mm th screed bed or bedding layer in cement mortar 1:6 all as specified and directed. | | 30 | Sqm |
|---|
| 9 | 9 | M&L grinding the old kota/marble stone work with machine grinder as in floors/walls and treating the surface with weas wax polish. all as specified and directed. | | 250 | Sqm |
|---|
| 10 | 10 | Dismantling of Wall and Ceiling boards of any thickness incl cover fillets etc complete all as specified and directed. | | 140 | Sqm |
|---|
| 11 | 11 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet and border inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed by Engr-in-Charge | | 60 | Sqm |
|---|
| 12 | 12 | S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and as directed by Engr-in-Charge | | 160 | RM |
|---|
| 13 | 13 | Dismantling of Asbestos cement (Corrugated or semi Corrugated etc) sheet in roof covering including wind tie etc complete all as specified and directed. | | 40 | Sqm |
|---|
| 14 | 14 | M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roof, fixed with L type or J type or cranked hook bolt complete all as specified and directed. | | 40 | Sqm |
|---|
| 15 | 15 | S&F in repair 0.63 mm , Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) including rivets , seals etc , complete all as speccified | | 20 | Sqm |
|---|
| 16 | 16 | Taking down cement plaster on brick work or concrete surfaces incl racking out joints etc complete all as specified and directed. | | 200 | Sqm |
|---|
| 17 | 17 | Demolition of brick work built in cement mortar or cement lime mortar etc complete all as specified and directed. | | 2.2 | Cum |
|---|
| 18 | 18 | M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6m mean radious built in CM 1:6 etc complete all as specified and directed. | | 2 | Cum |
|---|
| 19 | 19 | .....ditto as above but except brick ....ditto.... | | 0.2 | Cum |
|---|
| 20 | 20 | M&L for 15mm thick rendering in CM 1:6 on brick work or concrete surfaces finished even and smooth etc complete all as specified and directed. | | 100 | Sqm |
|---|
| 21 | 21 | M & L for 15mm thick rendering or brick work or concrete surface in CM (1:4) finished even & smooth without using extra cement all as specified. | | 150 | Sqm |
|---|
| 22 | 22 | M&L hacking out old broken glass any thickness/ size from wooden/mental frame, glazed with putty or fixed with beading etc complete all as specified and directed. | | 100 | Sqm |
|---|
| 23 | 23 | S&F 3.00mm thick sheet glass ordinary quality and glazing with oil putty in square n'exc 0.5 sqm in each pane etc complete all as specified and directed. | | 110 | Sqm |
|---|
| 24 | 24 | Taking up or down Steel Tubing bore of pipe in 15mm and connections, including cleaning for refixing or removal to store etc complete all as specified and directed. | | 10 | RM |
|---|
| 25 | 25 | ....ditto as above but for 20mm ...ditto ..... | | 10 | RM |
|---|
| 26 | 26 | S&F tubes medium grade bore of tube in 15mm galavanised with all fitting laid in trenches, walls, ceiling or laid in floors etc complete all as specified and directed. | | 10 | RM |
|---|
| 27 | 27 | S&F tubes medium grade bore of tube in 20mm galavanised with all fitting laid in trenches, walls, ceiling or laid in floors etc complete all as specified and directed. | | 10 | RM |
|---|
| 28 | 28 | Taking down chowkhats incl shutterrs (without taking off shutters from the frame) n.exc 1.5 sqm each etc complete all as specified and directed. | | 35 | Each |
|---|
| 29 | 29 | Taking down chowkhats incl shutterrs (without taking off shutters from the frame) exc 1.5 sqm and n'exc 4.00 sqm each etc complete all as specified and directed. | | 15 | Each |
|---|
| 30 | 30 | Taking down shutterrs exc 1 sqm and n'exc 2.00 sqm each etc complete all as specified and directed. | | 15 | Each |
|---|
| 31 | 31 | S&F 35mm thick 2nd class H/wood plain framed factory made shutter panels shutters (Two panel) with lock rail and panel of 9mm or 12mm B.W.P Commercial ply. The size of rail and style as per IS : 1003 (Part I), Kiln seasoned and chemically pressure treated etc complete all as specified and directed. | | 36 | Sqm |
|---|
| 32 | 32 | S&F 35mm thick 2nd class H/wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8 all as specified and directed. | | 27 | Sqm |
|---|
| 33 | 33 | S&F mild steel framed work of angle or any other section (grade 410 - 0 or Fe 310-0) as in door and door frame, gates of angle frame work etc including necessary welding etc complete all as specified and directed. | | 300 | Kgs |
|---|
| 34 | 34 | S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or welded all as specified and directed. | | 15 | Sqm |
|---|
| 35 | 35 | S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with out glazing bars , dovetailed or welded all as specified and directed. | | 15 | Sqm |
|---|
| 36 | 36 | S & F MS work as in widnw guard bars, plain, let in and fixed independently in wooden frames etc, and similar articles conforming to Fe 290 Gde E 165 complete all as specified and directed | | 30 | Kgs |
|---|
| 37 | 37 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixing in opening all as specified and directed.\n | | 95 | RM |
|---|
| 38 | 38 | S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width & stuck inside with solvent cement for stile and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing etc complete all as specified & directed. | | 27 | Sqm |
|---|
| 39 | 39 | Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving n.exc 15cm thickness (below or above ground level) etc complete all as specified and directed. | | 4 | Cum |
|---|
| 40 | 40 | Demolition of cement concrete (un-reinforced) as in sunken portions upto any depth in floors, as specified and directed by Engineer - in - Charge . | | 5 | Cum |
|---|
| 41 | 41 | M&L for water proofing treatment to floor and vertical surface of sunken portion complete all as specified and directed with including following :- \n(a) After demolition of floor & cement concrete etc remove all loose particles along with existing water proofing treatment (any no of layers) with wore brushes and cleaning the surface with sater . \n(b) Brushing cement slurry with 1.2 Kg of cement per square metre dult blended with acrylic water proofing compound. \n(c) 15mm thick average thickness plaster in cement mortar (1:3) mixed with water proofing compound on sunken portion and wall. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodae sump pipe. \n(d) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with acrylic water proofing compound. \n(e) Curring the sunken portion with water minimum for 48hours by ponding | | 50 | Sqm |
|---|
| 42 | 42 | M&L for cement concrete (1:5:10) type E-1 using 40mm graded stone aggregate as in filling and mass concrete complete all as specified. | | 5 | Cum |
|---|
| 43 | 43 | Taking down Aluminium door/window incl all fittings complete all as specified and directed. | | 10 | Each |
|---|
| 44 | 44 | S & F Anodised aluminium frame work for door/windows/ventilators frame incl providing necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading screws made out of approved section complete all as specified. | | 70 | kgs |
|---|
| 45 | 45 | S & F Anodised aluminium frame work for doors/windows/ventilators shutter made out of approved section incl providing necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading screws complete all as specified. | | 70 | Kgs |
|---|
| 46 | 46 | S&F for Aluminium anodised 75 x 75 mm size diamond pattern 7mm thick grill design No 102 including F/H section frame fixed with cadmium plated screw to window complete all as specified. | | 12 | Sqm |
|---|
| 47 | 47 | S & F stainess steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wodden beads to aluminium/steel windows & doors all as specified and directed. | | 12 | Sqm |
|---|
| 48 | 48 | S&F aluminium anodised barrel tower bolts of extruded section of 125mm size etc complete all as specified and directed. | | 140 | Each |
|---|
| 49 | 49 | S&F aluminium handles, cast type anodised of size 125mm etc complete all as specified and directed. | | 135 | Each |
|---|
| 50 | 50 | S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed etc complete all as specified and directed. | | 25 | Each |
|---|
| 51 | 51 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks all as specified | | 30 | Sqm |
|---|
| 52 | 52 | S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed. | | 50 | Sqm |
|---|
| 53 | 53 | S&F butt hinges medium grade cold rolled 100mm mild steel and fixed etc complete all as specified and directed. | | 70 | Each |
|---|
| 54 | 54 | S&F aluminium alloy, anodised,butt hinges 100mm mild steel and fixed etc complete all as specified and directed. | | 35 | Each |
|---|
| 55 | 55 | M&L for applying two coats of cement based paintover priming coat with alkali resistant priming paint including preparation of newly plastered surfaces , complete all as specified and directed. | | 150 | Sqm |
|---|
| 56 | 56 | M&L for preparation of newly plastered surfaces and applying two coats of white wash complete all as specified. | | 100 | Sqm |
|---|
| 57 | 57 | M&L for prepration of newly wooden surface over 10cm width or girth and applying two coats of syntheic enamel paint over a coat of pink primer etc complete all as specified and directed. | | 60 | Sqm |
|---|
| 58 | 58 | M&L for prepration of newly steel surface over 10cm width or girth and applying two coats of syntheic enamel paint over a coat of red oxide primer etc complete all as specified and directed. | | 45 | Sqm |
|---|
| 59 | 59 | S&F in repairs 600mmx450mm bevelled edge mirror of selecte quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washters etc complete all as specified and directed. | | 30 | Each |
|---|
| 60 | 60 | S&F rotational moulded polyethylene water storage tanks,triple layer, white color (cylindrical vertical with closed up, capacity in 500 Ltrs, hoisted and fixed in position with all fittings and fixtures including float valve 20 mm bore in position complete all as specified in SSR Part-I. include is dismantling of existing water tank etc complete all as specified and directed. | | 8 | Each |
|---|
| 61 | 61 | S&F rotational moulded polyethylene water storage tanks,triple layer, white color (cylindrical vertical with closed up, capacity in 1000 Ltrs, hoisted and fixed in position with all fittings and fixtures including float valve 20 mm bore in position complete all as specified in SSR Part-I include is dismantling of existing water tank etc complete all as specified and directed. | | 2 | Each |
|---|
| 62 | 62 | Supply & fixing in repairs vitreous china squatting pan “Orissa Pattern” of size 580mm x 440mm, white with, integral foot rests front or back inlets including lime concrete bedding complete all as specified and as directed by Engr-in-Charge etc complete all as specified and directed. | | 15 | Each |
|---|
| 63 | 63 | S&F in repair mild steel 300mm , ordinary rat tail rod pattern springs including roller plate etc complete all as specified and directed. | | 10 | Each |
|---|
| 64 | 64 | S&F in repair Door closure aluminium (Die cast) body hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 805 mm in width and of weight between 36 to 60 kg and fixed etc complete all as specified and directed. | | 5 | Each |
|---|
| 65 | 65 | S&F in repair Cast iron bib tap crutch or butter fly handle screwed down screwed for iron pipe and fixed to 15mm bore pipe fixed complete all as specified and directed. | | 60 | Each |
|---|
| 66 | 66 | S&F in repair Float valve 20mm size, of PTMT any colour with all fittings and fixtures etc complete all as specified and directed. | | 20 | Each |
|---|
| 67 | 67 | S&F in repair Float valve 25mm size, of PTMT any colour with all fittings and fixtures etc complete all as specified and directed. | | 10 | Each |
|---|
| 68 | 68 | S&F in repair Vitrous China urinal flat back (465x355x265)mm inluding waste pipe, waste coupling etc complete all as specified and directed. | | 10 | Each |
|---|
| 69 | 69 | S & F PVC ( SWR pipe ) 110 mm bore rain water pipe including removing old pipe and making good the disturbed surfaces in CM 1:4 or PCC 1:2:4 | | 30 | RM |
|---|
| 70 | 70 | S & F PVC ( SWR pipe ) 150 mm bore rain water pipe for shaft including removing old pipe and making good the disturbed surfaces in CM (1:4) or PCC 1:2:4 complete all as specified and directed. | | 30 | RM |
|---|
| 71 | 71 | S&F PVC (SWR) bends of radius110 mm complete all as specified and directed. | | 10 | Each |
|---|
| 72 | 72 | S&F PVC (SWR) bends of radius150 mm complete all as specified and directed. | | 10 | Each |
|---|
| 73 | 73 | M&L for Removing existing water proofing treatment of any type & Cleaning the surface by roughening, sweeping clean and washing down and applying cement slurry @ 3 kgs/sqm all as directed by Engineer-in-charge and disposing off out side Defence Land complet all as specified and directed. | | 50 | Sqm |
|---|
| 74 | 74 | M&L cement concrete B-1type (1:2:4) using 20 mm graded stone aggregate as in levelling /slopping course as in sub floors finishing the top surfaces fair and even complete all as specified and directed | | 2 | Cum |
|---|
| 75 | 75 | M&L applying water proofing treatment to roof slabwith APP modified polyeric membrane with centre core 100 micron HMHDPE out film 20 micron each having thickenss 3 mm , weight not less than 3.00 kg/Sqm with 100 mm side overlapand 150 mm end lapand laid with following course of descritiopn below:- \n(a) Applying evenly a coat of bituminous primer conforming to IS 3384-1965 @ 0.50 ltr/sqm prepared surface till the surface is properly impregnated and solvent oil in primer shall be allowded to evaporate completely.\n(b) Second caot of bonding material using hot blown grade bitumen 85/25@ 1.2 kg/Sqm conformoing to IS 702-1988 over bituminous primer .\n(c) third course i:e laying APP Modififed polymeric membrane describe hereinbefore with 100 mm overlap in longitudinal direction and 100 mm in traverse direction , \n(d) Fourth course of bonding material using hot blown grade bitumen 85/25 conforming to IS 702-1988 @ 1.2 Kg/Sqm over membrane.\n(e) Fifth course is sprinkling a layer of course sand dusting @ 1kg/Sqm as directed. | | 50 | Sqm |
|---|
| 76 | 76 | M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping bands and benching of manholes etc including slightly rounded or chamfered angles including necessary form work complete all as specified. | | 0.5 | Cum |
|---|
| 77 | 77 | M&L for PCC type C-2 (1:3:6) (20mm stone graded aggregate), 50mm thick as in Plinth Protection finished even and smooth etc complete all as specified and directed. | | 40 | Sqm |
|---|
| 78 | 78 | S&F in repair suspended metal snap grid frame with PVC coating (TEE or L-shaped as required) of size 605x605 mm for False Ceiling including provision of 8mm thick gypsum ceiling board(600x600mm size) laminated on both sides and fixed to snap grid frame complete all as specified and directed. | | 80 | Sqm |
|---|
