Public Works Department-PWD has published Special Repair Work Of Civil Hospital Residence Staff Quarter At Sohna In Gurugram Distt . ( Recall ) . Submission Date for this Tender is 05-11-2020. Building Work Tenders in Gurugram Haryana. Bidders can get complete Tender details and download the document.
| Name of Work: Special repair work of Civil Hospital Residences Staff Quarter at Sohna in Gurugram Distt. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing in cement (HSR; 8.5b) | BI01010001010000000000000515BI0100001113 | 58.63 | cum |
| 2 | 2 | Dismantling cement concrete plain 1:3:6 mi (HSR 8.6 e) | BI01010001010000000000000515BI0100001114 | 2.44 | cum |
| 3 | 3 | Dismantling cement eonglomerate/terrazzo floor 25 mm to 50 mm thick Without concrete base. (HSR 8.26) | BI01010001010000000000000515BI0100001115 | 77.87 | sqm |
| 4 | 4 | Scrapping of old plastered surface on wall as per HSR 8.32c. | BI01010001010000000000000515BI0100001116 | 2240.6 | Sqm |
| 5 | 5 | Cement concrete 1:1/5:3 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centering and shuttering , laid in position , complete in all respect (HSR 10.82+10.95) | BI01010001010000000000000515BI0100001117 | 2.44 | cum |
| 6 | 6 | First class brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. (HSR: 11.9 | BI01010001010000000000000515BI0100001118 | 18.29 | cum |
| 7 | 7 | Terracing consisting of tiles 22.86 cm X 11.43 Cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and on other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 kg per sqm on top of R.C.C slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. as per HSR 13.13 | BI01010001010000000000000515BI0100001119 | 942.34 | Sqm |
| 8 | 8 | Cement concrete 1:2:4 gola 10 cm X 10 cm quardrant along junction of roof with parapet wall finished smooth, where specially specified. (HSR: 13.64 | BI01010001010000000000000515BI0100001120 | 499.59 | rmt |
| 9 | 9 | Providing & Fixing 100 mm PVC Rainwater Pipe 6 kg. pressure of ISI mark in cement mortar during masonry work. (Note:- Reputed make such as Supreme, Finolex, Prince will be used as approved by Engineer-in-charge). [HSR 13.89]. (a) 100 mm dia PVC pipe 6 kg. pressure. \nNote:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material. | BI01010001010000000000000515BI0100001121 | 150 | Mtr. |
| 10 | 10 | Floating coat of 1.50 mm thick neat cement laid in one operation to the topping. (HSR 14.9+14.3) | BI01010001010000000000000515BI0100001122 | 77.87 | Sqm |
| 11 | 11 | Providing & Fixing Ist quality Ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manu-facturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including ointing in white cement mixed with pigment of matching shades complete. (a) (a) Size of ceramic glazed tile 200mmX 300mm:- [HSR 14.92(a)]. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like: NITCO, KAJARIA , SOMANI, ORIENT BELL, JOHNSON, RAK AND SIMPLOLO shall be used as approved by Engineer-in-charge (Double charged tiles shall be used Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material | 621.67 | Sqm | |
| 12 | 12 | Providing & Fixing Ist quality Ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manu-facturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including ointing in white cement mixed with pigment of matching shades complete. (a) Size of ceramic Glazed tiles 300 x 450 mm of reputed manufacturer like:- [HSR 14.92(b)]. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like: NITCO, KAJARIA , SOMANI, ORIENT BELL, JOHNSON, RAK AND SIMPLOLO shall be used as approved by Engineer-in-charge (Double charged tiles shall be used Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material | 1131.34 | sqm | |
| 13 | 13.1 | 12mm thick cement plaster 1:6 (HSR 15.7) Ground floor | 2350.74 | Sqm | |
| 14 | 13.2 | First Floor | 139.24 | Sqm | |
| 15 | 14 | 10mm thick plaster under side of ceiling as per HSR 15.52 | 211.9 | Sqm | |
| 16 | 15 | Cement pointing 1:3 flush on brick and tile walls HSR: 15.63 | 122.48 | sqm | |
| 17 | 16 | Cement pointing 1:2 flush on brick-on-edge Flooring. (HSR 15.70) | 315.37 | Sqm | |
| 18 | 17 | Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. (HSR 16.1+16.3) (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge) | 1359.01 | Sqm | |
| 19 | 18 | Painting two coats with synthetic enamel Paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge) (HSR 16.5) | 120.02 | Sqm | |
| 20 | 19 | Applying priming coat with metal primer on New steel or iron work including preparation of surface. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge) (HSR 16.9) | 315.18 | Sqm | |
| 21 | 20 | Painting two coats excluding priming coat with ready-mixed paint for metallic surfaces in all shades on new steel or iron work. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge) (HSR 16.17) | 281.02 | Sqm | |
| 22 | 21 | Preparation of plastered surfaces for oil bound distemper including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler,consisting of white lead, linseed oil, varnish and chalk mittii including finishing. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge) (HSR 16.52) | 913.56 | Sqm | |
| 23 | 22 | Distempering with washable oil bound distemper (of approved manufacture) one coats on old distempered work. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge) (HSR 16.58) | 5697.76 | Sqm | |
| 24 | 23 | Finishing of external wall of office building with exterior ecrelic emulsion ((Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge) HSR 16.79 b) 1st quality | 1706.58 | Sqm | |
| 25 | 24 | Cupboard shutters of commercial hard wood Such as hollock, champ chikrassy and Chaplash, etc. (non coniferous timber other than teak conforming to I.S specification no. 1003, kiln seasoned) excluding chowkat but with commercial plywood panels or faced one 25 mm thick (HSR 17.32b) | 1.25 | Sqm | |
| 26 | 25 | supplying and fixing glass panes with moulding of commercial hard wood such as hillock champ, chikrassy and chaplash etc. (Non coniferous timber other than teak, conforming to I.S. specification No. 1003, kiln seasoned)- Teak wood shutters with vertical styles and rails, as specified in the Statement No. 1 (attached in the end of this chapter), with two Nos.teak decorative plywood with teak facing on both sides panels of the specified thickness mentioned below tongued (HSR 17.36) (c) | 28.03 | Sqm | |
| 27 | 26 | Factory- manufactured paneled door or glazed window, shutters of commercial hard wood, such as hollock, champ, chikrassy and chaplash, etc., (non-coniferous timber other than tak, conforming ot I.S. specification no. 1003, kiln-seassoned), with 100 mm wide vertical styles, 150 mm wide lock rail 200 mm wide bottom rail, and wire gauze of 140 G or 120 G designation including cost of iron hinges, screws, chock/cleats, stops nails etc., complete fixed in position (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position. (Styles and rails of windows shutter shall be 75 mm wide. . as per HSR 17.90b note -17.18) | 34.37 | Sqm | |
| 28 | 27 | Factory manufactured wire gauze door and window shutters of commercial hard wood such as Hollock & Champ only. (non-coniferous timber other teak conforming to I.S. specification No. 1003, kiln seasoned) with 100 mm wide vertical styles, 150 mm wide lock rail 200 mm wide bottom rail, and wire gauze of 140 G or 120 G designation including cost of iron hinges, screws, chock/cleats, stops nails etc., complete fixed in position (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position. (Styles and rails of windows shutter shall be 75 mm wide. (i) 30 mm thick. [HSR 17.92 (i) - Note 1 under 17.18] | 99.96 | Sqm | |
| 29 | 28 | Factory manufactured Solid Flush Door Shutter, with block board core as per I.S. No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hotpressed, conforming to I.S. 2202 part I and II, fixed in position, including iron hinges, screws, chocks/cleats and stops etc., (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position. (Note:- reputed make such as Duro, Green, Kitply will be used as approved by Engineer-in-charge). HSR 17.93 (c) - \nNote 1 under 17.18]. (iii) 35 mm thick. Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material. | 267.85 | sqm | |
| 30 | 29 | Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. (HSR 18.12) | 73.02 | Qtl | |
| 31 | 30 | Steel reinforcement TMT bars FE-500 EQR/FE-500 D grade or more for RCC work, where no included in the complete rate of RCC including Straightening, bending, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. and placing in position complete in all respects for all heights/depths /storeys/ basements etc.\n(Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work, excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding and placing, shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement). (HSR 18.22). | 2.2 | Qtl | |
| 32 | 31 | Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified sections, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving door and window frame of size 114 mm X 50 mm with 40 mm wide double rebate. (HSR: 18.34) (d) | 258.67 | rmt | |
| 33 | 32 | PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (to the approval of the Engineer-in-charge). INDIAN TYPE ORISSA OR ORYA WATER CLOSET SUITE for sinking into floor, with raised foot treads COMPLETE WITH 100 MM G.C.I.’P’ TRAP with or without vent as required and all OTHER NECESSARY FITTINGS as fully described in item no.30.1 above. . (HSR: 30.2 a (i) Size 580mm | 20 | each | |
| 34 | 33 | Providing and fixing in position best indian make (as approved by the engineer-in-charge European type water closet suite, syphonic type consisting of- (i) VITREOUS CHINAWARE SYPHONIC SUITE WITH 15 LITRES CAPACITY MATCHING CHINAWARE CISTERN and all internal brass fittings COMPLETE WITH ‘P’ or ‘S’ TRAP with or without vent; (as approved by the Engineer-in-charge). (ii) One piece SEAT AND LID IN HOLLOW BLACK OR WHITE PLASTIC fitted with chromium plated hinges and rubber buffers, (to the approval of the Engineer-in-charge) COMPLETE in all respects INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOORS. (A) Single trap symphonic W.C. Suite (i) Single Color. [HSR 30.5 (a) (i)]. | 5 | each | |
| 35 | 34 | EXTRA OVER item nos. 30.1 to 30.4 and 30.6 FOR PROVIDING AND FIXING 15 LITRES CAPACITY C.I. LOW LEVEL VITREOUS CHINAWARE CISTERN complete with flush bend all other necessary Fittings instead of C.I high level cistern complete with fittings. (HSR . 30.12)(i) | 20 | each | |
| 36 | 35 | Providing and fixing in position best indian make (ordinary) lavatory suites consisting of :- Lavatory in vitreous chinaware size as given below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary. R.S or C.I brackets for building into wall including painting. R.S or C.I brackets for building into wall including painting 32 mm C.P brass waste with C.P brass chain and rubber plug 15 mm C.P brass screw down pillar tap with jamnuts or couplings best design (as approved by the Engineer-in-charge) All fittings best Indian make and; to the approval of the Engineer-in-charge All brass work chromium plated and complete in all respects including cutting and making good the walls floors and painting of fitting etc. 550mmx400mm with one no. tap White HSR(30.41) (iv) | 19 | each | |
| 37 | 36 | Providing and fixing in position 32mm dia G.I waste pipe embedded in wall or lead waste pipe (weighing 3.47 kg. per metre and 2.8 mm thick) upto floor level including cost of wipped solder joint etc. complete (as required by the Engineer-in-charge) (HSR 30.48) | 20 | each | |
| 38 | 37 | PROVIDING AND FIXING IN POSITION BEST QUALITY STAINLESS STEEL SINKS WITH COMPLETE FITTINGS AS FULLY DESCRIBED IN ITEM NO. 30.51 ABOVE. 600 mm x 450 mm x 200 mm(HSR 30.53a) | 20 | each | |
| 39 | 38 | Providing and fixing in position 15 mm I/d C.P. brass bib cocks of best quality (as required by the engineer In charge) HSR (30.75) (a) Bib cock long body | 90 | each | |
| 40 | 39 | Providing and fixing in position C.P brass stop cocks (as approved by the Engineer-in-Charge) (HSR 30.76) a) 15mm stop cock (ii) Concealed stop cock with flange | 50 | each | |
| 41 | 40 | CUTTING CHASE IN BRICK WALLS IN CEMENT OR IN FLOOR FOR EMBEDDING G.I OR H.C.I PIPE LINES AND MAKING GOOD THE SAME TO ITS ORIGINAL CONDITION Size 75 mm x 75 mm (HSR: 30.95) (a) | 250 | Mtr. | |
| 42 | 41 | PROVIDING AND FIXING IN POSITION AUTOMATIC BRASSBALL VALVES IN TANKS with copper ball 20mm internal diameter HSR: 30.110 (a-ii) | 20 | each | |
| 43 | 42 | Providing and fixing HDPE water storage tanks of sintex, Diplast, O.K. supreme make with covers/lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing Iin position, making connections with inlet and outlet pipes, providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction to the Engineer.(HSR-30.119) 1000 Ltr. Cap. | 20 | each | |
| 44 | 43 | NS items \nProviding and Laying Pre-polished Granite stone 17 mm & above (Colors like :- S-White, Steel Grey, Tan Brown, Marigold, crystal Blue, Rajasthan Black, Copper Silk) in flooring, laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite stone. (NS). | 47.63 | sqm | |
| 45 | 44 | Providing & Fixing Vitrified Tiles 600mm x 600mm of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand morter 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like: NITCO, KAJARIA , SOMANI, ORIENT BELL, JOHNSON, RAK AND SIMPLOLO shall be used as approved by Engineer-in-charge (Double charged tiles shall be used (NS) \nNote:-The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material | 891.23 | sqm | |
| 46 | 45.1 | DSR items \nProviding and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 15 mm dia nominal bore(DSR 18.10) | 310 | Mtr. | |
| 47 | 45.2 | 20MM diameter | 180 | Mtr. | |
| 48 | 46 | Providing and fxing gun metal gate valve with C.I. wheel of approved quality (Screwed end) (DSR 18.17)\n20mm I/d | 40 | each | |
| 49 | 47 | Recovery Items:-Bidder have to quote rate for recovery items at least or more than reserve price. The rate quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency.T Note:- The reserve rate/amount is minimum amount to be used as base for quoted purchase rate by the agency. No rates/amount below the reserve price will be entertained and reserve price will be considered for all purposes in case the agency quotes lesser than reserve price.-- Door @ 200 Each | 21 | each | |
| 50 | 48 | Window @ 300 Each | 40 | each | |
| 51 | 49 | Brick Bats @ 500 per cum | 29 | cum | |
| 52 | 50 | Brick @ 4.00 Each | 14071 | each | |
| 53 | 51 | Steel Item @ 18.00 Per Kg | 176 | Kg | |
| 54 | 52 | Note:- 1. In case of any difference in the unit & nomenclature of any of the HSR Items of Civil, P.H.,. work depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable.\n2. Only reputed make material will be used (make/brand exhibited in HSR and exhibited in approved standard document) as approved by Engineer-in-charge, while executing various items/works at site. | BI01010001010000000000000515BI0100001124 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
