}

Construction Of Sedd Shed Of Agriculture Office At Kalakote . , nowshera-Jammu And Kashmir

Public Works Department-PWD has published Construction Of Sedd Shed Of Agriculture Office At Kalakote . . Submission Date for this Tender is 03-11-2020. Shed Construction Tenders in nowshera Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

25799811
Corrigendum : Construction Of Sedd Shed Of Agriculture Office At Kalakote .
Open Tender
Indian
Jammu And Kashmir
nowshera
03-11-2020

Tender Details

Construction Of Sedd Shed Of Agriculture Office At Kalakote .

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 29-Oct-2020 extension of dates Date 03-11-2020

Key Value

Document Fees
INR 1000 /-
EMD
INR 30000.0 /-
Tender Value
INR 15 Lakhs /-

BOQ Items

Name of Work: Construction of Seed Shed of Agriculture Office at Kalakote
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables, etc. (not exceeding 1.50 M in width) & for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.50 Mtr including disposal of excavated earth upto 1 Mtr. From cutting edge, disposed earth is to be leveled and neatly dressed .(All kinds of soil 80% and Ordinary rock 20%) 46 Cum
2 2 Providing and laying in position Cement concrete of specified grade excluding the cost of centering and shuttering – all work upto plinth level.1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size Crushed) . 7 Cum
3 3 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work upto plinth level in 1:3:6(1cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size using plums (size not over 160mm split nallah stone or quarry stone @ 30% of grass volume) crushed 41 Cum
4 4 Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete 150 Sqm
5 5 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) 20.7 Cum
6 6 Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level 20.7 Cum
7 7 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 7.4 Cum
8 8 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 10.6 Cum
9 9 Reinforcement for RCC work including strengthening, cutting, bending, placing in position and binding all complete COLD TWISTED BARS 4450 Kg
10 10 Centring and shuttering including strutting propping etc. & removal of form work for
11 10.1 Foundations, footings, bases of columns etc. for mass concrete. 96.25 Sqm
12 10.2 Walls (any thickness) including attached pilasters, buttresses, plinth and\nstring courses etc. 21 Sqm
13 10.3 Suspended floors, roofs, landings, balconies and access platfarm. 71 Sqm
14 10.4 Edges of slabs & breaks in floors and walls (Under 20 cm wide) 39 Rmt
15 11 Providing and fixing pressed steel door frames conforming to IS: 4351,\nmanufactured from commercial mild steel sheet of 1.60mm thickness, including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60mm pressed, mild steel welded or rigidly fixed together by mechanical means, including M.S pressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:Profile B Fixing with adjustable lugs with split end tail to each jamb 21 Rmt
16 12 Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate. 38 Sqm
17 13 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking\nwith push and pull operation complete, including the cost of providing and\nfixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.20 mm M.S. laths with 1.20 mm thick top cover 12 Sqm
18 14 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. 60 Kg
19 15 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) 79 Sqm
20 16 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 course sand) 118 Sqm
21 17 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 coarse sand) 120 Sqm
22 18 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. 318 Sqm
23 19 Distempering with oil bound washable distemper of approved brand and\nmanufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer 210 Sqm
24 20 Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) 15 Sqm
25 21 Painting with synthetic enamel paint of approved brand and manufacture\nto give an even shade. Two or more coats on new work 15 Sqm
26 22 Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)\n 108 Sqm
27 23 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: - Butt hinges and necessary screws shall be paid separately). First class kail wood\n 0.77 Sqm
28 24 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. First Class kail wood 3.44 Sqm
29 25 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. First class kail wood 3 Sqm
30 26 Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of\naverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge First class kail wood 5.5 Sqm
31 27 Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing\ncomplete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : 61 Sqm
32 28 Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete. 31 Sqm
33 29 Carriage of material by mechanical transport from source to the site of work including loading/unloading and stakcing complete.
34 29.1 Sand for an av. lead 80 Kms distance by M.T. 28 Cum
35 29.2 Bajree/Stone aggregates below 40mm nominal size for an av.distance 20 Kms by M.T 31 Cum
36 29.3 Stone for an av.lead of 12 Kms distance by M.T 12.3 Cum
37 29.4 Bricks for an average lead of 90 kms distance by M.T 9850 Nos
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail