Special Repair To Bldg No . T-21 ( Office Complex ) Which Incl Floor Tiling False Ceiling , Wall Plaster , Replacement Of Doors And Windows And Repair / Replacement Of Ac Sheets Of 252 Para Ad Bty Under Ge ( West ) Agra

Tender Notice

25796358
Special Repair To Bldg No . T-21 ( Office Complex ) Which Incl Floor Tiling False Ceiling , Wall Plaster , Replacement Of Doors And Windows And Repair / Replacement Of Ac Sheets Of 252 Para Ad Bty Under Ge ( West ) Agra
Indian
Uttar Pradesh
21-10-2020
11-11-2020
17-11-2020

Tender Details

special Repair To Bldg No . T-21 ( Office Complex ) Which Incl Floor Tiling False Ceiling , Wall Plaster , Replacement Of Doors And Windows And Repair / Replacement Of Ac Sheets Of 252 Para Ad Bty Under Ge ( West ) Agra

Key Value

Document Fees
INR 500 /-
EMD
INR 57600.00 /-
Tender Value
INR 28.80 Lakhs /-

BOQ Items

Name of Work: SPL REPAIR TO BLDG NO. T-21 (OFFICE COMPLEX) WHICH INCL FLOOR TILING FALSE CEILING, WALL PLASTER, REPLACEMENT OF DOORS & WINDOWS & REPAIR / REPLACEMENT OF AC SHEETS OF 252 PARA AD BTY UNDER GE (WEST) AGRA
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Dismantling of plain or corrugated steel sheeting any gauge thickness, including Nanital or similar pattern roof covering. complete all as specified and directed. 600 Sqm
2 2 S&F Pre- painted galvaume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws of appropriate size as per manufacturer’s instruction cmplete all as specified and directed. Note :- The sheet shall be laid with one corrugation side lap and end lap minimum 150mm in slope all as per manufacturer's instructions .or as directed by GE\n\n\n 550 Sqm
3 3 S&F Pre- painted galvaume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws of appropriate size as per manufacturer’s instruction cmplete all as specified and directed. Note :- The sheet shall be laid with side lap and end lap minimum 150mm as per manufacturer's instructions .or as directed by GE\n\n\n 50 Sqm
4 4 Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed 10 Cum
5 5 M&L Brick work with sub class 'B' bricks, old size straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed 10 Cum
6 6 Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys ,scrubbing down with water etc complete all as specified and directed. 600 Sqm
7 7 Material and labour for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed. 450 Sqm
8 8 Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and even as in wall complete all as specified and directed. 250 Sqm
9 9 M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed. 5 Cum
10 10 M&L for preparing old decorated surfaces of walls plastered or un-plastered by complete removal of existing treatement by scraping, washing, rubbing down or stopping distempered or painted surfaces etc & applying of Birla/JK white wall putty 1 to 1.5 mm thick on existing prepared surface for smooth finishing and applying two coats of oil emulsion distemper complete all as specified and directed. 300 Sqm
11 11 M&L for preparation of new plaster surfaces on wall & applying two coats of oil emulsion over & applying a coat of Birla / JK white putty 1 to 1.5 mm thick on existing prepared surface complete all as specified and directed.\n 450 Sqm
12 12 M&L preparation of new plaster surfaces on walls and applying two coat of cement base paint over a coat of alkali resistant priming paint. complete all as specified and directed. 250 Sqm
13 13 M&L for preparing old surfaces of walls plastered or un-plastered by brooming down with steel or wire brush and scraping down smoke moulds moss & efflorescent salt & removing all vegetation growth etc & applying two coat of cement base paint on old decorated cement based painted surfaces of walls complete all as specified and directed. 100 Sqm
14 14 M&L for preparing old surfaces of walls plastered or un-plastered by brooming down with steel or wire brush and scraping down smoke moulds moss & efflorescent salt & removing all vegetation growth etc and applying two coats of weather proof exterior emulsion paint silicon based complete all as specified and directed. 50 Sqm
15 15 Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. 190 Sqm
16 16 S&F in repair 605x605mm snap grid of powder coated galvanized iron of angle of size 23mm x 23mm of 30 gauge (perimeter), T section of size 23mm x32mm main and 23mm x 25mm (intermediate) of 30 gauge suitable for false ceiling including GI strip of 20mm wide of 30 gauge for hanging arrangement etc complete all as specified and directed 190 Sqm
17 17 M&L for 4 mm thick non asbestos fibre cement building boards fixed or laid / inserted to timber / GI / Aluminium frame work with screws complete all as specified and directed. 190 Sqm
18 18 Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises, complete all as specified and directed. 605.1 Sqm
19 19 M&L for glazed coloured ceramic tiles ,first quality ( of approved class , colour and design/ shade ) of size 450 x 300 x 7 to 8 mm thick in vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with shade of coloured tiles, over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified and directed. 210 Sqm
20 20 M&L for vitrefied coloured Ceramic tiles,first quality( of approved class, light Shade), 10 mm thick (Square/ rectangular),polished, area of each tiles not exceeding 0.36 sqm, ,as in floor surface etc set and jointed in neat cement slurry and pointed in coloured cement to match with shade of coloured tiles over and including 15 mm thick screed bed in Cement mortar 1: 4 Complete all as specified and directed. 250 Sqm
21 21 M&L for vitrefied coloured Ceramic tiles,first quality( of approved class ,light Shade), 10 mm thick (Square/ rectangular),polished, area of each tiles not exceeding 0.36 sqm, ,(cut in required size), fixed on vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with shade of coloured tiles, over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified and directed. 10 Sqm
22 22 M&L for non skid coloured Ceramic tiles, joint free, first quality( of approved class , colour and design/ shade ) 7 to 8 mm thick (Square/ rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, ,as in floor surface etc set and jointed in neat cement slurry and pointed in coloured cement to match with shade of coloured tiles over and including 15 mm thick screed bed in Cement mortar 1: 6 Complete all as specified and directed. 134.41 Sqm
23 23 Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. 0.5 Per Ten Sqm
24 24 M&L for granite stone 20mm thick glazed (table rubbed and polished) fixed as in plateform and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of slab and exposed edges rounded with and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed. 5 Sqm
25 25 Dismantling cement concrete floor tiles including cement mortar bedding complete and M&L chequered cement concrete tiles 25 cm x 25 cm x 25 mm thick with grey cement and pigment as in floor surface etc set and jointed in neat cement slurry and pointed in coloured cement to match with shade of coloured tiles over and including 20 mm thick screed bed in Cement mortar 1: 6 Complete all as specified and directed. 60 Sqm
26 26 M&L for 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in flooring / sub base finished rough to receive floor for flooring / sub base finished rough to receive floor for leveling and slop mainting complete all as specified and directed. 320 Sqm
27 27 Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. 90 Sqm
28 28 S&F solid PVC wall lining consisting of 5 mm thick, single side prelam pvc sheet and other side plain colour pvc sheet used inclusive of solvent cement and fixing at site on PVC frame as per specificatin and drawing shown in section 8 of SSR Part-II 2010 complete all as specified and directed. 90 Sqm
29 29 S&F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing shown in section 8 of SSR Part-II 2010 complete all as specified and directed. 250 RM
30 30 Demolition of cement concrete (unreinforced) of any description in any position not otherwise specifically provided complete all as specified and directed. 3 Cum
31 31 M&L 75 mm thick cement concrete type C-1, 1:3:6 using 20mm graded stone aggregates as in plinth protection finishing cement concrete even and smooth without using extra cement including making 12 mm wide and in full depth, joints at each corner and at every 3.00 mtr interval filling the same with mastic filling i.e one part of bitumen 85/25 and 3 part of sand complete all as specified and directed. 40 Sqm
32 32 S&F sand stone slabs 50 mm thick as in sun shades, chhajas, shelves, landings cover stone etc n.exc 2mtr in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortal 1:4 complete all as specified and directed. 5 Sqm
33 33 Taking down existing louver / jallies complete any type any size and S&F precast cement concrete louvers and jallies 25 mm thick (measured solid) type B-0, (1:2:4) using 12.5 mm graded aggregate including all moulding set in cement mortar 1:4 but excluding frame complete all as specified and directed. 5 Sqm
34 34 Taking down Chowkhats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each complete all as specified and directed. 12 Each
35 35 S&F powder coated aluminium frame for doors, windows with one or more rebate joining cleats, screws, dash,fastners,plug for fixing with wall, columns etc ( minimum thickness of powder coating 50 micron) complete all as specified and directed. 80 Kg
36 36 S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, powder cated aluminum snap beading screws etc ( minimum thickness of powder coating 50 micron) complete all as specified and directed. 30 Sqm
37 37 M&L for 4.8 mm thick sheet glass ordinary quality and glazing exceeding 0.50 Sqm in each pane fixed with rubber gasket & aluminium beading in aluminium frame work complete all as specified and directed.\n 29 Sqm
38 38 S&F 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination , fixed with aluminium beading in aluminium frame complete all as specified and directed. 15 Sqm
39 39 Taking down Chowkhats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each complete all as specified and directed. 22 Each
40 40 S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) ( minimum thickness of powder coating 50 micron) complete all as specified and directed. 20 Sqm
41 41 M&L for aluminium grill with alumnium anodized or power coated mesh of size 50 mm x 50 mm with square tube (solid) 6 mm thick complete all as specified and directed. 20 Sqm
42 42 S&F steel windows with side hung shutters including box type hinges with steel handle, and 125 mm MS tower bolt 2 Nos in each leaf and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and directed. 20 Sqm
43 43 S&F steel ventilator with top hung shutters including box type hinges with steel peg stay complete complete all as specified and directed. 2 Sqm
44 44 S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work and similar works conforming to Fe-290 Gd E-165 complete all as specified and directed. 195 Kg
45 45 S & F Galvanized mild steel wire cloth, 0.40 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed 1 Sqm
46 46 S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty wooden beads in squares n. exc. 0.5 sqm in each pane complete all as specified and directed. 18 Sqm
47 47 S&F 3 mm thick figured glass pin bead type and glazing with oil putty wooden beads in squares n. exc. 0.5 sqm in each pane complete all as specified and directed. 1 Sqm
48 48 M&L for preparation of new or previously untreated steel surfaces not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. 20 Sqm
49 49 S&F solid PVC door frame of size 50mmx 47mm made out of 5 mm prelam PVC sheet reinforced with MS square tube & edges will be painted to match with prelam sheet as per specification & drawings shown in section 8 of SSR Part-II 2010 complete all as specified and directed. 5 RM
50 50 S&F Factory made solid PVC moulded door shutter with particle board core, 28 to 30 mm thick(stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC Sheet on the front face & 2 mm prelam PVC sheet on back face, fixing in frame at site as per specifications & drawings shown in section 8 of SSR Part II 2010 complete all as specified and directed. 2 Sqm
51 51 S&F 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws to frame complete all as specified and directed. 3 Each
52 52 S&F extruded aluminium alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed. 2 Each
53 53 S&F aluminium anodised barrel tower bolt of extruded section 150 mm long and fixed complete all as specified and directed. 2 Each
54 54 S&F in repair Europen water closet snow white (one piece EWCs with seat cover and twin flush fittings) of size 710 x 390 x 790 mm including necessary 'S' traps and connection to drain pipe etc with and including necessary fixing arrangement as per manufactures instructions complete all as specified and directed. Cat Part No :-. 0101327 Strap 300 mm, model Cruiser of make Cera or equivalent model in specified makes as approved by GE. 1 Each
55 55 Dismantling and taking down of existing water storage tank any type & any capacity complete and removing from site and S&F rotational moulded polyethylene water storage tanks 1000 liter capacity (cylindrical vertical with closed top) with and including ball brass valves, high pressure with polythene float and fly nut complete screwed for 20 mm bore iron pipe or for brass ferrule, hoisted and fixed in position complete as specified in SSR Part I 2009 complete all as specified & directed. 1 Each
56 56 S&F in repair 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule complete all as specified and directed. 1 Each
57 57 S&F 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. 3 Each
58 58 S&F in repair soap dish recessed type, stainess steel, fancy type , fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. Cat Part No : AHS 1531 model Queen's of make Jaquar or equivalent model in specified makes as approved by GE. 2 Each
59 59 S&F in repair glass shelf assembly consisting of 5.5 mm thick sheet glass shelf with crystal polish on edge with and including chromium plated bracket guard and railing 60 cm long , fancy type fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. \nCat Part No :- ACN-1171 N model Continental & make Jaquar or equivalent model in specified makes as approved by GE. \n 2 Each
60 60 S&F in repair fancy type PVC bathroom mirror cabinet (PTMT Alloy) with mirror of size 350x450 mm, fancy type fixed to wall with rawl plugs and chromium plated screws complete all as specified & directed. Make:-Pryag Cat Part No 557 or equivalent model in specified makes as approved by GE. 1 Each
61 61 S&F in repair health fauset (hand shower), ABS body, fancy type , chromium plated, with one meter long easy flex in chrome finishes tube with wall hook and jet suitable and screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed. Cat Part No : ALD -CHR 585 of make Jaquar or equivalent model in specified makes as approved by GE. \n 2 Each
62 62 S&F in repair towel rail ,D type, brass, chromium plated,, fancy type, 60 cm long between flanges fixed with and including CP brass screws, rawl plug etc complete all as specified and directed. 2 Each
63 63 S&F in repair Corner glass shelf 6.3 mm thick and 30 cm long with crystal polish on edge (with brack) , fancy type fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. \nCat Part No :- ACN-1173 model Continental of make Jaquar or equivalent model in specified makes as approved by GE. \n 2 Each
64 64 S&F in repair central hole Basin Mixer single lever,cast copper alloy , fancy type, chromium plated without Popup Waste system with 450 mm long Braided Hoses complete screwed down for 15 mm bore GI pipe or GI socket complete all as specified and directed.\nCat Part No : CON-169KNB, model Continental of make Jaquar or equivalent model in specified makes as approved by GE. 2 Each
65 65 S&F in repair towel Rack 600 mm long with lower hangers, Stainless steel chromium plated, fancy type, fixed with and including chromium plated screws and rawl plugs etc complete all as specified and directed. \nCat Part No : AHS 1581 model Hatelier of make Jaquar or equivalent model in specified makes as approved by GE. 2 Each
66 66 S&F in repair Liquid soap dispenser with glass bottel fixed with and including Chromium plated brass screws and rawl plug etc. complete all as specified and directed.\nCat part No.ACN-1135N model continental of make Jaquar or equivlaent model in specified makes as approved by GE. 2 Each
67 67 S&F in repair toilet paper roll holder with flap, stainless steel, fancy type, chromium plated, fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. \nCat Part No : AHS-1551 Model Queen's of make Jaquar or equivalent model in specified makes as approved by GE. 2 Each
68 68 S&F in repairs pillar taps, cast copper alloy, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. 1 Each
69 69 S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap (excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. with and including plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and washing jet , cast copper alloy , chromium plated ,15mm dia fixed to water closet with 1.2 m to 1.5 m long flexible pipe with chromium plated spring type cover complete with fixing arrangement with fancy look complete all as specified and directed. 1 Each
70 70 S&F in repairs PVC body valveless,syphonic action type, flushing cistern 10 ltr capacity, low level, white, with inlet ball valve and float,and handle including bracket and PVC flush pipe 32 mm dia complete all as specified and directed 1 Each
71 71 S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two brass check nuts & washers complete all as specified and directed. 4 Each
72 72 S&F in repair fancy type angle cock with flange, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. 4 Each
73 73 S&F fancy type, stop cock regular body 20 mm nominal bore with flange, brass, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed. 2 Each
74 74 S&F in repair wall hung wash basin with full Pedestal (snow white) of size 550mm x 400 mm including necessary fixing arrangement as per manufacturer instruction complete all as specified and directed.\nCat part No.S2040119 for Wash basin and S20 90112 for Pedestal, model Cona of make Cera or equivalent model in specified makes as approved by GE. 2 Each
75 75 S&F in repair sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with & including one chromium plated suitable waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement ,with PVC coupling, PVC waste pipe 40mm bore 750mm long complete all as specified and directed. 1 Each
76 76 S&F for 600x450mm beveled edge looking mirror of selected quality glass 4 mm thick mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. 1 Each
77 77 S&F in repairs bib taps, cast copper alloy , fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed. 2 Each
78 78 S&F in repair PVC grating doom 125 mm dia of PTMT (minimum weight not less than 40 grams) with waste hole complete all as specified and directed. 3 Each
79 79 Taking up or down existing steel tubing and connections of walls ceiling, floor etc of 20 mm bore complete all as specified and directed. 30 RM
80 80 Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed. 30 RM
81 81 Taking up or down existing steel tubing and connections of walls ceiling, floor etc of 15 mm bore complete all as specified and directed. 20 RM
82 82 Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed. 20 RM
83 83 Taking down carefully existing unserviceable copper / aluminum point wiring of any description & in any position with and ncluding taking out existing unserviceable conduits or battens of any description with sunken boxes/junction boxes and all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc but excluding tube light fittings and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed. 175 Each Point
84 84 Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed PVC conduit (Medium grade) of suitable size all as directed with using new sunken type pressed steel box / terminal boxes for mounting fittings/junction boxes not less than 1.6mm thick duly painted with two coats of black bituminous paint over a coat of red oxide primer with 3mm thick bakelite laminated sheet, and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. 105 Each Point
85 85 All as per Srl item No 84 here in above but point wiring for 5 pin switch socket outlet, 5/6 Amps on independent board.omplete all as specified and directed. 30 Each Point
86 86 All as per Srl item No 84 here in above but point wiring for 5 pin switch socket outlet, 5 Amps on same board with other switches complete all as specified and directed. 20 Each Point
87 87 All as per Srl item No 84 here in above but point wiring for one six pin socket outlet, 15 & 5 Amps (independent) controlled by one switch with using 2.5 Sqmm (nominal area) stranded copper conductor omplete all as specified and directed. Notes for item 83 to item 86 here in before : \n(i) The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillars etc. for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at RCC Columns/Beams/Ceilings shall be in surface conduit of suitable size fixed on surface with using PVC rawl plugs and provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick bakelitelaminated sheet fixed with suitable GI screws and cup washers) \n(ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A' \n(iii) The size of conduits shall be determined on permissible No. of runs of wires as specified in SSR Part-I (2009) clause 19.125 (B). However minimum size of conduit shall be 20mm dia (Medium grade) 20 Each Point
88 88 Supplying & fixing for piano switch flush type, 5/6 Amps, single pole, one way , 230 volts AC circuit complete all as specified & directed. 155 Each
89 89 Supplying & fixing for piano switch flush type, 15/16 Amps, single pole, one way , 230 volts AC circuit complete all as specified & directed . 20 Each
90 90 Supplying & fixing for socket outlet, five pin, 5/6 Amps, flush type, 230 volts AC circuit complete all as specified & directed . 50 Each
91 91 Supplying & fixing for socket outlet, multipurpose, three pin, 15/16 Amps & three pin 5 Amps controlled by one switch , flush type, 230 volts AC circuit complete all as specified & directed. 20 Each
92 92 Supplying & fixing for ceiling rose PVC Polycarbonate isolated body 62.5 x 25 mm, three terminals, complete all as specified & directed. 85 Each
93 93 Supplying & fixing for lamp holder, insulated body with back plate suitable for batten fitting complete all as specified & directed. 20 Each
94 94 Supply & fixing LED Bulb 15 watt warm white suitable for lamp holder complete all as specified and directed. 20 Each
95 95 Supply and fixing fan regulator electronic, step type, suitable for ceiling fans of any capacity, pre-wired 230 volts AC 50Hz supply 100Watt complete all as specified & directed. 20 Each
96 96 Disconnecting and taking down old unserviceable sheet metal enclouser any size any type including MCB etc complete and Supply, fixing, connecting & testing sheet metal single pole and neutral enclosure with metal clad (two pin and earth) plug top and socket complete with and including one No MCB ( 'C' series), SP, 20 Amps, 240 Volts, having breaking capacity 10 KA complete all as specified and directed. 8 Each
97 97 S&F in replacement & testing LED battan surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption < 20W, luminaire lumens > 2000 lms, system efficiency of > 120 lumens / W, LED of make : Nichia / Cree / Everlite / Eclison / OSRAM / Lumiled, with LED binding as per ANSJ Bin C78377A, Ingress protection IP 20, colour rendering index CRI > 80, temp range 0 to 45 ºC, driver efficiency > 85%, power facor > 0.95 THD < 20% as per IEC 61000-3-2, colour temp - 6500 K Surge protection 2.5 KV, 50000 burning hrs (min) as per L 70 criteria, two stages isolated constant current operated driver with range 150 - 270 VAC and safety extra low voltage safe level < 60 VDC as per IEC standard with LM 70 & 80 certification complete all as specified and directed Make :- Wipro Model No.LL20-221 - XXX-65NE3 or equivalent model of specified make as approved by GE. 28 Each
98 98 Supplying, fixing in replacement & testing Rececess mounted compact full panel LED size 595 mm x 595 mm with white powder coating housing acting as heat sink and frame in CRCA sheet high efficency LED grade disffuser in built electronic driver duly prewired, power consumption <36W luminarie lumen > 3500 lms and system efficiency > 120 lms/w, CRI > 80, LED make : Nichia/Cree/Everlite/Eclison/Osram/Lumiled with LED binning as per ANSJ Bin C78.3777A, photo biological safety report as per IEC624718 & electrical insulation class 1, colour temp -5700K, ingress protection IP 20, driver efficiency > 85%, 50000 burning hours (min) as per L70 criteria, ambient, temp 0 to 500C, power factor> 0.95, THD< 10%, surge protection is CM-3KV, two stages isolated constant current operated driver with range 150-270V AC and safety extra lowe voltage safe level < 60V DC as per IEC standard, with LM79 & LM80 certification and connecting the same to electric source with using copper conductor 0.50 Sqmm flexible PVC sheathed and insulated three core copper conductor cable, including all accessories and fixing arrangements for fixing the light fitting to ceiling complete all as specified & directed. Make : Wipro Model No. CRC010R038HP57GL1 or equivalent model of specified make as approved by GE. \n 26 Each
99 99 Supply & fix in replacement & testing LED security light with aluminium pressure diecast housing, high purcity PC Fresnel diffuser with silicon gasket for IP 65 protection, power consumption < 40 W & system efficiency > 100 lumens/W, in built electronic driver prewired upto terminal block with driver efficiency > 85 %, power factor > 0.95 suitable for external pole upto 35 mm, LED make :- Nichia / Cree / OSRAM/Everlite/Lumiled / Eclison, CRI > 70, suitable for ambient temp range of 0-45 ºC, THD <10% as per IEC 61000-3-2, colour temp 5700 K Surge protection 3.5 KV, 50000 burning hrs (min) as per L70 Criteria, multi stage constant current operated driver with range 150-270 VAC and safety exra low voltage safe load < 60 VDC as per IEC standards with LM 70 & 80 certification complete all as specified, fixed to pole or wall of buiding with and including suitable Bracket made out of 40 mm dia GI light grade pipe, 1.20 m long bent to shape by cutting & welding as required & directed and fixed with two Nos of FI clamps 50x6 mm to be tightened with suitabe size of bolts, nut and washers and including painted with two coat of aluminium paint over a coat of red oxide primer, and including connecting the fitting to electric source with & including twin twisted copper flexible wire of size 0.75 Sqmm including all accessories and fixing arrangements for fixing the light fitting complete all as specified & directed. \nMake : Wipro Model LR02-451-XXX-57-G1 or equivalent make as specifed as approved by GE. \n 6 Each
100 100 Disconnecting & taking up or down existing unserviceable sub main wiring of copper/aluminium conductor with two run of single core cable with one run of single core earth conductor cable of any description, any size & in any position including taking out existing unserviceable conduits or battens of any description and making good the disturbed surfaces to the existing surfaces all as specified and directed. (NOTE : Two run of single core PVC cable with one run of earth conductor and conduit /batten shall be measured as one unit.) 160 RM
101 101 M&L for sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 6 Sqmm of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) of dia not less than 20 mm with standard accessories along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 2.5 Sqmm as earth continuity conductor connected to earth dolly complete all as specified and directed. 60 RM
102 102 M&L for sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4.00 Sqmm of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) of dia not less than 20mm with standard accessories along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 2.5 Sqmm as earth continuity conductor connected to earth dolly complete all as specified and directed. Notes for item No.101 and 102 here in before :- (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.\n(ii) The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillars etc. for concealing the conduits to required depth & making good the disturbed surface in cement sand mortar 1:4 including finishing the surface to match with the existing surface. The portion of sub main wiring at ceiling/RCC surfaces shall be in surface conduit of suitable size fixed on ceiling/RCC surfaces with using PVC rawl plugs) 100 RM
103 103 Disconnecting and taking down old unserviceable distribution boards any size any type including MCB TPN/SPN/SP etc and making good the disturbed surfaces to the existing surfaces complete all as specified and directed. 6 Each
104 104 Supply, fixing, connecting & testing factory made, epoxy powder coated, distribution board (sheet metal encloser) , triple pole and neutral, 4 ways, (Vertical DB's) ,with metal door and fixed flush to wall and suitable for universal mounting with having copper bus bars of capacity 200 Amps rating, of suitable size , for double door and suitable for using MCCB, 4 Pole as incomer and SP MCBs as out going, conforming to IS : 13032 complete all as specified & directed, ( Note: Switchgears shall be measured and paid for separately under appropriate item of Sch ‘A’. 2 Each
105 105 Supply, fixing, connecting & testing factory made, epoxy powder coated, distribution board (sheet metal encloser) , singe pole and neutral, 8 ways, (Horizontal DB's) ,with metal door and fixed flush to wall and suitable for universal mounting with having copper bus bars of capacity 200 Amps rating, of suitable size , for double door and suitable for using MCB, SPN as incomer and MCBs SP as out going, conforming to IS : 13032 complete all as specified & directed, ( Note: MCBs shall be measured and paid for separately under appropriate item of Sch ‘A’. 5 Each
106 106 Supplying & fixing MCCB 100 Amps, 4 pole, 415 volts, AC supply having ultimate breaking capacity Icu 16 KA and Ics= 100% of Icu with adjustable 70% to 100% and thermal magnetic release complete all as specified and directed. 2 Each
107 107 Supplying & fixing MCB single pole, & neutral, 40 Amps (`C’ series ) having short circuit rating 10 KA, 240 volt complete all as specified and directed. 5 Each
108 108 Supplying & fixing MCB single pole, 2 Amps (`C’ series ) having short circuit rating10 KA, 240 volt complete all as specified and directed. 15 Each
109 109 Supplying & fixing MCB single pole, 6 Amps (`C’ series ) having short circuit rating 10 KA, 240 volt complete all as specified and directed. 15 Each
110 110 Supplying & fixing MCB single pole, 16 Amps (`C’ series ) having short circuit rating 10 KA, 240 volt complete all as specified and directed. 15 Each
111 111 M&L for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor. 2 Each
112 112 .Supplying, laying, jointing & testing XLPE insulated PVC sheathed (heavy duty) armoured cable with aluminium conductor for working voltage upto 1100 volts size 50 Sqmm 3.5 core conforming to IS 7098 Part-I or IS 1554 Part-I. complete all as specified and directed. 70 RM
113 113 Excavation in trenches in any type of soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient for laying cables/pipes etc. complete all as specified and directed \nNote : (i) Excavation shall be made carefully in order.\n(ii) The excavation work may be carried out in short lengths for locating fault in under ground cables at different locations\n 31 Cum
114 114 Returning, filling in excavated soil including spreading, leveling, watering and well ramming in layers of 25 cm thick after the cables etc. are laid, jointed and tested complete all as specified and directed . 22.5 Cum
115 115 Removal of surplus excavated soils to a distance not exceeding 50 M and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. 8.5 Cum
116 116 M&L for old size sub class `B` bricks, kiln burnt, as in cable protection laid flat with axis of brick perpendicular to the axis of the cable complete all as specified and directed . 400 Each
117 117 Material & labour for sand filling with clean dry find sand unwashed including gently punning around under ground cables in trenches/ducts for cable protection with layers of sand ( 8 cm deep before laying cable and 15 cm after laying cable ) complete all as specified and directed 4 Cum
118 118 Supplying and fixing of GI tubing, 50 mm bore, light grade as in sleeving/protection of cable etc laid in trenches/floor or fixed on pole / wall etc. with and including suitable size of MS clamp and nut, bolt ,washer etc complete all as specified and directed 6 RM
119 119 Supply, fixing, laying & testing 25 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. laid in trenches complete all as specified and directed. 80 RM
120 120 Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. laid in trenches complete all as specified and directed. 30 RM
121 121 S&F 25 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. 2 Each
122 122 M&L for cutting the road for laying of pipe line and repair / making good the same with and including cement concrete work with using 400 Kg of cement per cubic meter complete all as specified and directed. 1 Cum
123 123 M&L for cutting / drilling and tapping in position of CI / DI pipe of size 100/150 mm bore water mains for branch connection of 25 mm bore GI pipe with and including new brass ferrul necessary GI fittings tee, etc earth work, returning filling and removal of surplus soil if required including dawtery etc complete all as specified and directed. 1 Each Job
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2020 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail