Delhi Development Authority-DDA has published Maintenance Of Various Colonies Under Nazul A/C-Ii Dwarka Zone . Up-Gradation Of Park At Isolated Pkt-20 D Nasirpur Near Telephone Exchange Dabri. Submission Date for this Tender is 28-10-2020. Building Repair Tenders in Dwarka, New Delhi Delhi. Bidders can get complete Tender details and download the document.
Name of Work: M/o various colonies under Nazul A/C-II Dwarka Zone.. Sub Head: Up-Gradation of Park at Isolated Pkt-20 D Nasirpur Near Telephone Exchange Dabri. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :\na) 25 mm thick | 434 | sqm. | |
2 | 2 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | 246 | sqm. | |
3 | 3 | Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.( Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).\na) Overhead informatory road signage | 5.3 | sqm. | |
4 | 4 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.\na) Made of G.I. wire of dia 4 mm | 36 | sqm. | |
5 | 5 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. | 168 | sqm. | |
6 | 6 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.\na) 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. | 408 | sqm. | |
7 | 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:\na)1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate\n40 mm nominal size) | 37 | cum. | |
8 | 8 | Brick work with clay fly ash F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:\na) Cement mortar 1:6 (1 cement : 6 coarse sand) | 24 | cum. | |
9 | 9 | 12 mm cement plaster:\na)1:6 (1 cement : 6 coarse sand) | 104 | sqm. | |
10 | 10 | 15 mm cement plaster on rough side of single or half brick wall of mix:\na)1:6 (1 cement: 6 coarse sand) | 83 | sqm. | |
11 | 11 | Finishing walls with water proofing cement paint of required shade :\na)1 New work (Two or more coats applied @ 3.84 kg/10 sqm) | 187 | sqm. | |
12 | 11.01 | Finishing walls with water proofing cement paint of required shade :\na) Old work (one or more coats @ 2.20 kg/10 sqm)\ncomplete. | 1298 | sqm. | |
13 | 12 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :\na)One or more coats on old work | 70 | sqm. | |
14 | 13 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.\na)In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete | 3767 | k.g | |
15 | 14 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :\na) Two or more coats on new work | 44 | sqm. | |
16 | 15 | Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.\na) 8mm thick Granite of any colour and shade | 9 | sqm. | |
17 | 16 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | 126 | cum. | |
18 | 17 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). | 4 | cum | |
19 | 18 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | 247 | k.g | |
20 | 19 | Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. | 15 | sqm. | |
21 | 20 | Cost index @1% on Item No. 1 to 19. | 2.76885e+06 | Cost Index |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail