Road And Building Department-RBD has published Construction Of New Labour Room And Operation Theater Over The 1St Floor Of The Labour Room At Chc Balisira Under Nhm Building Work. Submission Date for this Tender is 05-11-2020. Building Work Tenders in Balisira Odisha. Bidders can get complete Tender details and download the document.
Name of Work: Construction of new labour room and operation theater over the 1st floor of the labour room at CHC Balisira under NHM | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | PART-A - (CIVIL WORKS) Ground floor\nEarth work excavation in foundation in hard or gravelly soil within 50 mtr. initial lead and 1.5 mtr. initial lift including rough dressing and breaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 mtr. depth including cost of all labour, labour cess and T&P for the work etc. complete and as directed by the Engineer-in-Charge. | 242.67 | Each Cum | |
2 | 2 | Supplying, filling in foundation and plinth with sand in 22.5 cm (9") thick layers including watering and ramming with cost, conveyance, royalties, labour and labour cess with T&P required for the work etc complete as per the direction of the Engineer-in-charge. | 120.74 | Each Cum | |
3 | 3 | Cement concrete of proportion (1:3:6) in foundation and floors using 4 cm (1.5") size clean hard hand broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm (6") thick to required level ramming, watering, curing etc. complete including cost and conveyance of all materials with all royalties, labour, labour cess with T&P required for the work etc. complete including dewatering if required as per direction of the Engineer-in-charge. | 38.05 | Each Cum | |
4 | 4 | Cement concrete (1:2:4) using 12 mm size hard crusher broken granite chips of approved quality from approved quarry including all cost, labour, labour cess, T&P, royalties, conveyances etc. complete as per direction of the Engineer-in-charge. | 7.79 | Each Cum | |
5 | 5 | Random Rubble stone masonry in cement mortar (1:6) in foundation and plinth with hard broken granite stone of approved size and quality from approved quarry including splays cutting, circular moulding and similar such type of work with necessary projections, chamfering and corbelling, watering and curing etc. complete including cost and conveyance of all materials with royalties with all labour, labour cess and T & P required for the work etc. complete. | 47.44 | Each Cum | |
6 | 6 | R.C.C. work in Column footing of grade M20 having a minimum compressive strength work test of 200 Kg./cm. in 15 cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 20 mm size down graded (20 mm not to exceed 25%) hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering and curing for 4 weeks centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials, labour and labour cess with T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc of the M.S. Rods or Tor Steel and binding wire tying the grills and placing in proper position. | 43.81 | Each Cum | |
7 | 7 | R.C.C. work in Column Superstructure of grade M20 having a minimum compressive strength work test of 200 Kg./cm. in 15 cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 20 mm size down graded (20 mm not to exceed 25%) hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering and curing for 4 weeks centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials, labour and labour cess with T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc of the M.S. Rods or Tor Steel and binding wire tying the grills and placing in proper position. | 13.35 | Each Cum | |
8 | 8 | R.C.C. work in Plinth Beam / Band of grade M20 having a minimum compressive strength work test of 200 Kg./cm. in 15 cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 20 mm size down graded (20 mm not to exceed 25%) hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering and curing for 4 weeks centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials, labour and labour cess with T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc of the M.S. Rods or Tor Steel and binding wire tying the grills and placing in proper position. | 7.97 | Each Cum | |
9 | 9 | R.C.C. work in Lintel of grade M20 having a minimum compressive strength work test of 200 Kg./cm. in 15 cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 20 mm size down graded (20 mm not to exceed 25%) hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering and curing for 4 weeks centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials, labour and labour cess with T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc of the M.S. Rods or Tor Steel and binding wire tying the grills and placing in proper position. | 2.78 | Each Cum | |
10 | 10 | R.C.C. work in Chajja of grade M20 having a minimum compressive strength work test of 200 Kg./cm. in 15 cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 20 mm size down graded (20 mm not to exceed 25%) hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering and curing for 4 weeks centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials, labour and labour cess with T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc of the M.S. Rods or Tor Steel and binding wire tying the grills and placing in proper position. | 10.68 | Each Sqm | |
11 | 11 | R.C.C. work in Roof Beam of grade M20 having a minimum compressive strength work test of 200 Kg./cm. in 15 cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 20 mm size down graded (20 mm not to exceed 25%) hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering and curing for 4 weeks centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials, labour and labour cess with T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc of the M.S. Rods or Tor Steel and binding wire tying the grills and placing in proper position. | 21.09 | Each Cum | |
12 | 12 | R.C.C. work in Roof Slab of grade M20 having a minimum compressive strength work test of 200 Kg./cm. in 15 cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 20 mm size down graded (20 mm not to exceed 25%) hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering and curing for 4 weeks centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials, labour and labour cess with T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc of the M.S. Rods or Tor Steel and binding wire tying the grills and placing in proper position. | 41.29 | Each Cum | |
13 | 13 | R.C.C. work in Parapet in Ramp of grade M20 having a minimum compressive strength work test of 200 Kg./cm. in 15 cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 20 mm size down graded (20 mm not to exceed 25%) hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering and curing for 4 weeks centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials, labour and labour cess with T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc of the M.S. Rods or Tor Steel and binding wire tying the grills and placing in proper position. | 12.76 | Each Cum | |
14 | 14 | Straightening bent up or coiled rods (HYSD) cutting, bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for RCC works and for providing cost, conveyance of M.S. rod or Tor steel and binding wires of 18 to 20 gauge and labour, labour cess with T & P required for the work etc complete in all floors (Weight of binding wires and lapping & wastage of rod will not be considered for payment and payment will be made on weight of actual length of M.S. rods or Tor steel only.) | 139.02 | Each Qntl | |
15 | 15 | Fly ash brick masonry in cement mortar (1:6) after immersing bricks for six hours in water before use in Foundation & Plinth using fly ash bricks of 9" size having a crushing strength of not less than 75 Kg. per sq. cm including splays, cutting, circular mouldings, chamfering, corbelling and similar such type of works with all necessary projections, watering and curing etc. complete including cost and conveyance of all materials, labour and labour cess with T&P required for the work with all royalties etc. complete in all respect. | 0.29 | Each Cum | |
16 | 16 | Fly ash brick masonry in cement mortar (1:6) after immersing bricks for six hours in water before use in Superstructure using fly ash bricks of 9" size having a crushing strength of not less than 75 Kg. per sq. cm including splays, cutting, circular mouldings, chamfering, corbelling and similar such type of works with all necessary projections, watering and curing etc. complete including cost and conveyance of all materials, labour and labour cess with T&P required for the work with all royalties etc. complete in all respect. | 18.65 | Each Cum | |
17 | 17 | 12 mm thick cement plaster (1:6) finished smooth to outside brick walls after raking out the joint including watering and curing with cost and conveyance of all materials and labour, labour cess with T&P required for the work with royalties etc. complete in all respect as per direction of the Engineer-in-charge. | 145.75 | Each Sqm | |
18 | 18 | 16 mm thick cement plaster of proportion (1:6) finished smooth to inside brick work after racking out joints including watering and curing, cost, conveyance, royalities of all materials with all labour, labour cess and T&P required for the work etc complete in all respect as per direction of the Engineer-in-charge. | 254.42 | Each Sqm | |
19 | 19 | 20 mm thick cement plaster of proportion (1:6) finished smooth to stone work after racking out joints including watering and curing, cost, conveyance, royalties of all materials with all labour, labour cess and T&P required for the work etc complete in all respect as per direction of the Engineer-in-charge | 22.48 | Each Sqm | |
20 | 20 | Supplying, fitting and fixing of Vitrified tile in floors of size 600mm x 600mm of plain (Ivory) in approved make conforming to IS 13756 laid on 20mm thick cement mortar (1:4) (1cement:4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour, labour cess and T&P etc. required for the work all complete as per direction of the Engineer-in-charge. | 111.56 | Each Sqm | |
21 | 21 | Providing & fixing of Ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 30cm x 20cm / 20cm x 20cm special plain / printed series in dados, skirting and risers of steps on 12 mm thick cement mortar (1:3) jointed with neat cement slurry mixed with colouring pigments to match the sheds of the tiles including cost of ceramic wall tiles, all materials, labour, labour cess, royality, conveyance, T&P etc. complete as directed by the Engineer-in-charge. | 275.99 | Each Sqm | |
22 | 22 | 12 mm (1/2") thick cement plaster (1:4) finished smooth to brick works with neat cement punning for skirting and dados after raking out the joints including watering and curing with cost and conveyance, royalties of all materials, labour & labourcess with T&P required for the works etc. complete in all respect as per direction of Engineer-in-charge. | 0.93 | Each Sqm | |
23 | 23 | Providing & fixing of Chequered tile special plain/ printed series in floors, treads or steps and landing on 25 mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with colouring pigments to match the sheds of the tiles including cost of ceramic floor tiles, all materials, labour, labour cess, royality, conveyance, T&P etc. complete as directed by the Engineer-in-charge. | 134.16 | Each Sqm | |
24 | 24 | Supplying of M.S. Window grill / M.S. Fixed Grill / M.S. grill gate made out of M.S. angle, M.S. flat & M.S. square etc including cutting, welding, all labour, labour cess and T&P etc complete as per direction of Engineer-in-charge | 377.68 | Each Kg | |
25 | 25 | Supplying of M.S Panneled Door double leaved with M.S. frames (35x35x6 mm M.S. Angle), top and bottom rail (25x25x3 mm M.S. Angle), door pannel with 1.00 C.R. sheet, pannel stiffner covering width of each leaf 19 x 5 mm, M.S.flat 3 Nos. on each leaf, hinges 6 nos of size 100 mm (3 nos. on each side) bought out as per ISS. Hold fast 3 nos on each side of 35 x 35 x 6 mm M.S. Angle 175 mm length bifurcated at the tip, with 4 nos fabricated Handle (19x5 mm M.S. Flat), 2 nos Aldrop bought out as per ISS & 2 nos Tower bolts as per approved design & direction of Engineer-in-charge, including cost, conveyance, labour cess and labour charges of all materials etc. complete. | 124.44 | Each Kg | |
26 | 26 | Painting two coats with any approved paint over a coat of priming to new iron work including cost of the primer and paint sand papering polishing the surface with cost conveyance of all materials, labour and labour cess with T&P required for the work etc complete in all respect as per direction of the Engineer-in-charge | 39.58 | Each Sqm | |
27 | 27 | Cement concrete (1:2:4) using 12 mm size hard crusher broken granite chips of approved quality from approved quarry including all cost, labour, labour cess, T&P, royalties, conveyances etc. complete as per direction of the Engineer-in-charge. | 3.68 | Each Cum | |
28 | 28 | Wall Painting two coats with any approved weather coat paint of approved shade over a coat water bound wall cement primer on new work to give an even shade after cleaning surface including cost of all materials, labour, labour cess, T&P required for the work etc complete as per direction of the Engineer-In-Charge | 398.23 | Each Sqm | |
29 | 29 | Wall painting two coats to wall surface with any approved Plastic Emulsion paint over a coat of primer of approved shade on new work to give an even shade after cleaning surface including cost of all materials, labour, labour cess, T&P required for the work etc complete as per direction of the Engineer-In-Charge. | 111.45 | Each Sqm | |
30 | 30 | Labour for fitting & fixing of M.S. window grills including cost of screws, labour, labour cess etc. complete as per direction of the Engineer-In-Charge | 10.82 | Each Sqm | |
31 | 31 | Labour charges for fitting and fixing of M.S. Door, Window, Fixed Grill & Gate, Rolling shutter etc. in proper position including making holes in walls, RCC structures and wood work etc. and making good to the damages to walls or RCC structure including mending or cutting to sizes or grooves in walls and fixing with RCC (1:2:4) with HB granite chips of 12mm size with cost and conveyance of all materials, royalties, labour, labour cess and T&P required for the work etc. complete as per direction of the Engineer-in-charge. | 4.88 | Each Sqm | |
32 | 32 | Supplying,fitting,fixing up window (sliding type) made up aluminium section 9778 as windows frame, section No.4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of all materials, labour, labour cess, T&P etc. complete but excluding cost of 5 mm th. black glass as per direction of the Engineer-in-charge (weight will be taken for Al. sections only without fittings). | 52.96 | Each Kg | |
33 | 33 | Supplying of 5mm thick Black Glass including cutting to required sizes for fixing in Al. window including labour cess as per direction of the Engineer-in-Charge. | 11.91 | Each Sqm | |
34 | 34 | Providing, fitting, fixing of Aluminium Door with anodized Aluminium door section of 9202 as vertical member, 9201 as top member, 9200 as bottom and middle member and 6mm thick black glass in top portion with 12mm thick pre-laminated board in bottom portion fixed on door frame fitted with rubber bidding, with frame section no. 9221 and tappered clip No.4660 and the frame to be completed by means of jointing angle No.1855, with locking arrangement with 6 lever mortise lock, door stoper, handle etc. complete including cost of all material, labour, labour cess, T&P, hire charges of of drilling machine, labour charges etc. complete but excluding cost of 6mm thick black glass and 12mm thick pre-laminated board as per direction of Engineer-in-charge (Weight will be taken for Al. sections only without fittings). | 127.99 | Each Kg | |
35 | 35 | Supplying of 6mm thick Black Glass including cutting to required sizes for fixing in Al. Door, labour cess and as per direction of the Engineer-in-Charge. | 4.96 | Each Sqm | |
36 | 36 | Supplying of 12mm. Thick Pre-laminated particle Board (standard type) (I.S.I.) including cutting to required sizes for fixing in Al. Door, labour cess and as per direction of the Engineer-in-Charge | 5.76 | Each Sqm | |
37 | 37 | Dismantling and removing RCC columns, beams, slab, staircase, landing, lintels including stacking the materials for reuse and removing the debris within 50 m. lead including all labour, labour cess, T&P etc. complete as directed by the Engineer-in-charge. | 6.54 | Each Cum | |
38 | 38 | Dismantling brick or stone masonary in lime or cement mortar below 10" height including stacking the useful materials for reuse and removing the debris with 50 m. lead including all labour, labour cess, T&P etc. complete as directed by the Engineer-in-charge | 79.08 | Each Cum | |
39 | 39 | Providing and laying Granular Sub-base with Grading-VI stone screening materials as per Table 400-1 as per approved drawing and technical specifications complete in all respect as per Section 900 and Clause 401 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. | 19.06 | Each Cum | |
40 | 40 | Providing and laying 80 mm thick factory made chamfered edge Cement Concrete interlocking Paver Block of required strength, thickness & size / shape, made by table vibratory method, to attain superior smooth finish using PU or equivalent moulds, laid in required colour & pettern over 50mm thick compacted bed of coarse sand, compacting and proper embeding /laying of inter locking paver block into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath parks, lawns, drive ways or light traffic parking etc. all complete as per manufactures specification with cost, conveyance, royalties, labour and labour cess with T&P required for the work etc complete as per the direction of the Engineer-in-charge. | 125.14 | Each Sqm | |
41 | 41 | First Floor\nR.C.C. work in Column Superstrecture of grade M20 having a minimum compressive strength work test of 200 Kg./cm. in 15 cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 20 mm size down graded (20 mm not to exceed 25%) hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering and curing for 4 weeks centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials, labour and labour cess with T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc of the M.S. Rods or Tor Steel and binding wire tying the grills and placing in proper position. | 11.19 | Each Cum | |
42 | 42 | R.C.C. work in Lintel of grade M20 having a minimum compressive strength work test of 200 Kg./cm. in 15 cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 20 mm size down graded (20 mm not to exceed 25%) hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering and curing for 4 weeks centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials, labour and labour cess with T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc of the M.S. Rods or Tor Steel and binding wire tying the grills and placing in proper position. | 2.74 | Each Cum | |
43 | 43 | R.C.C. work in Chajja of grade M20 having a minimum compressive strength work test of 200 Kg./cm. in 15 cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 20 mm size down graded (20 mm not to exceed 25%) hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering and curing for 4 weeks centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials, labour and labour cess with T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc of the M.S. Rods or Tor Steel and binding wire tying the grills and placing in proper position. | 9.75 | Each Sqm | |
44 | 44 | R.C.C. work in Beam of grade M20 having a minimum compressive strength work test of 200 Kg./cm. in 15 cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 20 mm size down graded (20 mm not to exceed 25%) hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering and curing for 4 weeks centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials, labour and labour cess with T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc of the M.S. Rods or Tor Steel and binding wire tying the grills and placing in proper position. | 13.61 | Each Cum | |
45 | 45 | R.C.C. work in Roof Slab of grade M20 having a minimum compressive strength work test of 200 Kg./cm. in 15 cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 20 mm size down graded (20 mm not to exceed 25%) hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering and curing for 4 weeks centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials, labour and labour cess with T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding etc of the M.S. Rods or Tor Steel and binding wire tying the grills and placing in proper position. | 30.82 | Each Cum | |
46 | 46 | Straightening bent up or coiled rods (HYSD) cutting, bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for RCC works and for providing cost, conveyance of M.S. rod or Tor steel and binding wires of 18 to 20 gauge and labour, labour cess with T & P required for the work etc complete in all floors (Weight of binding wires and lapping & wastage of rod will not be considered for payment and payment will be made on weight of actual length of M.S. rods or Tor steel only.) | 68.44 | Each Qntl | |
47 | 47 | Fly ash brick masonry in cement mortar (1:6) after immersing bricks for six hours in water before use in superstructure using fly ash bricks of 9" size having a crushing strength of not less than 75 Kg. per sq. cm including splays, cutting, circular mouldings, chamfering, corbelling and similar such type of works with all necessary projections, watering and curing etc. complete including cost and conveyance of all materials, labour and labour cess with T&P required for the work with all royalties etc. complete in all respect. | 31.71 | Each Cum | |
48 | 48 | 2.5 cm thick grading concrete (1:2:2:) on roof slab with 6 mm size hard crusher broken granite chips including all cost, conveyance and royalties of materials with labour, labour cess and T&P required for the work etc. complete as per direction of Engineer-in-charge. | 182.38 | Each Sqm | |
49 | 49 | 12 mm thick cement plaster (1:6) finished smooth to outside brick walls after raking out the joint including watering and curing with cost and conveyance of all materials and labour, labour cess with T&P required for the work with all royalties etc. complete in all respect as per direction of the Engineer-in-charge. | 137.39 | Each Sqm | |
50 | 50 | 16 mm thick cement plaster of proportion (1:6) finished smooth to inside brick work after racking out joints including watering and curing, cost, conveyance, royalities of all materials with all labour, labour cess and T&P required for the work etc complete in all respect as per direction of the Engineer-in-charge. | 341.37 | Each Sqm | |
51 | 51 | Supplying, fitting and fixing of Vitrified tile in floors of size 600mm x 600mm of plain (Ivory) in approved make conforming to IS 13756 laid on 20mm thick cement mortar (1:4) (1cement:4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour, labour cess and T&P etc. required for the work all complete as per direction of the Engineer-in-charge. | 123.64 | Each Sqm | |
52 | 52 | Providing & fixing of Ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 30cm x 20cm / 20cm x 20cm special plain / printed series in dados, skirting and risers of steps on 12 mm thick cement mortar (1:3) jointed with neat cement slurry mixed with colouring pigments to match the sheds of the tiles including cost of ceramic wall tiles, all materials, labour, labour cess, royality, conveyance, T&P etc. complete as directed by the Engineer-in-charge. | 187.25 | Each Sqm | |
53 | 53 | Supplying of M.S. pannelled window double leaved with M.S. Frame ( 35 x 35 x 6 mm M.S Angle), shutter style -Top & bottom rail with 25 x 25 x 3 mm M.S. Angle, window pannel with 1.00 mm C.R. sheet, Pannel stiffner covering width of each leaf 19 x 5 mm M.S. Flat 2 nos of each leaf, Hinges 4 nos of size 100 mm. ( 2 nos on each side) bought out as per ISS, Hold Fast 2 nos. on each side with 35 x 35 x 6 mm angle 100 mm. length bifurcated at tip, with 2 nos fabricated handle (19x5 mm M.S. Flat), 4 nos tower bolt bought out as per ISS and Horizontal grills of 12 mm M.S. Round at 100 mm. spacing as per approved design and direction of Engineer-in-charge including cost and conveyance of all materials with all labour, labour cess and T&P required for the work etc. complete | 388.04 | Each Kg | |
54 | 54 | Supplying of M.S Panneled Door double leaved with M.S. frames (35x35x6 mm M.S. Angle), top and bottom rail (25x25x3 mm M.S. Angle), door pannel with 1.00 C.R. sheet, pannel stiffner covering width of each leaf 19 x 5 mm, M.S.flat 3 Nos. on each leaf, hinges 6 nos of size 100 mm (3 nos. on each side) bought out as per ISS. Hold fast 3 nos on each side of 35 x 35 x 6 mm M.S. Angle 175 mm length bifurcated at the tip, with 4 nos fabricated Handle (19x5 mm M.S. Flat), 2 nos Aldrop bought out as per ISS & 2 nos Tower bolts as per approved design & direction of Engineer-in-charge, including cost, conveyance, labour cess and labour charges of all materials etc. complete. | 141.02 | Each Kg | |
55 | 55 | Painting two coats with any approved paint over a coat of priming to new iron work including cost of the primer and paint sand papering polishing the surface with cost conveyance of all materials, labour and labour cess with T&P required for the work etc complete in all respect as per direction of the Engineer-in-charge | 41.55 | Each Sqm | |
56 | 56 | Wall Painting two coats with any approved weather coat paint of approved shade over a coat water bound wall cement primer on new work to give an even shade after cleaning surface including cost of all materials, labour, labour cess, T&P required for the work etc complete as per direction of the Engineer-In-Charge | 156.89 | Each Sqm | |
57 | 57 | Wall painting two coats to wall surface with any approved Plastic Emulsion paint over a coat of primer of approved shade on new work to give an even shade after cleaning surface including cost of all materials, labour, labour cess, T&P required for the work etc complete as per direction of the Engineer-In-Charge. | 275.23 | Each Sqm | |
58 | 58 | Labour for fitting & fixing of M.S. window grills including cost of screws, labour, labour cess etc. complete as per direction of the Engineer-In-Charge | 11.19 | Each Sqm | |
59 | 59 | Labour charges for fitting and fixing of M.S. Door, Window, Fixed Grill & Gate, Rolling shutter etc. in proper position including making holes in walls, RCC structures and wood work etc. and making good to the damages to walls or RCC structure including mending or cutting to sizes or grooves in walls and fixing with RCC (1:2:4) with HB granite chips of 12mm size with cost and conveyance of all materials, royalties, labour, labour cess and T&P required for the work etc. complete as per direction of the Engineer-in-charge. | 5.53 | Each Sqm | |
60 | 60 | Supplying,fitting,fixing up window (sliding type) made up aluminium section 9778 as windows frame, section No.4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of all materials, labour, labour cess, T&P etc. complete but excluding cost of 5 mm th. black glass as per direction of the Engineer-in-charge (weight will be taken for Al. sections only without fittings). | 54.67 | Each Kg | |
61 | 61 | Supplying of 5mm thick Black Glass including cutting to required sizes for fixing in Al. window including labour cess as per direction of the Engineer-in-Charge. | 12.32 | Each Sqm | |
62 | 62 | Providing, fitting, fixing of Aluminium Door with anodized Aluminium door section of 9202 as vertical member, 9201 as top member, 9200 as bottom and middle member and 6mm thick black glass in top portion with 12mm thick pre-laminated board in bottom portion fixed on door frame fitted with rubber bidding, with frame section no. 9221 and tappered clip No.4660 and the frame to be completed by means of jointing angle No.1855, with locking arrangement with 6 lever mortise lock, door stoper, handle etc. complete including cost of all material, labour, labour cess, T&P, hire charges of of drilling machine, labour charges etc. complete but excluding cost of 6mm thick black glass and 12mm thick pre-laminated board as per direction of Engineer-in-charge (Weight will be taken for Al. sections only without fittings). | 192.05 | Each Kg | |
63 | 63 | Supplying of 6mm thick Black Glass including cutting to required sizes for fixing in Al. Door, labour cess and as per direction of the Engineer-in-Charge. | 7.44 | Each Sqm | |
64 | 64 | Supplying of 12mm. Thick Pre-laminated particle Board (standard type) (I.S.I.) including cutting to required sizes for fixing in Al. Door, labour cess and as per direction of the Engineer-in-Charge | 8.65 | Each Sqm | |
65 | 65 | PART-B - (E.I. WORKS)\nRecessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 6Amp ,250V Modular switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, Metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard) \nGroup-A -L.P- 4 F.P- 4 C.B.P-\n | 8 | Point | |
66 | 66 | Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 6Amp ,250V Modular switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, Metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard) \nGroup-B L.P- 10 F.P-3 C.B.P- | 13 | Point | |
67 | 67 | Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 6Amp ,250V Modular switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, Metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard) \nGroup-C L.P- 51 F.P- 16 C.B.P- | 67 | Point | |
68 | 68 | Supply and fixing of 6Amp plug with 6Amp switch on existing board (Modular type ) | 15 | Each | |
69 | 69 | Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches connection (make-Schneider/ Legrand /Panasonic) | 6 | Each | |
70 | 70 | Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Finolex/L&T/Anchor/Havells/V-Guard)\n2 X 1.5sq.mm +1 X 1.5sqmm\n | 30 | Mtr. | |
71 | 71 | Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Finolex/L&T/Anchor/Havells/V-Guard)\n2 X 2.5sq.mm +1 X 1.5sqmm\n | 302 | Mtr. | |
72 | 72 | Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Finolex/L&T/Anchor/Havells/V-Guard)\n2 X 4sq.mm +1 X 1.5sqmm.\n | 80 | Mtr. | |
73 | 73 | Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Finolex/L&T/Anchor/Havells/V-Guard)\n2 X 6sq.mm +1 X 2.5sqmm.\n | 50 | Mtr. | |
74 | 74 | S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose . | 4 | Each | |
75 | 75 | Supply and fixing of copper plate earthing( 600 X 600 X 3.15mm )with running copper flat 25 X 5mm from copper plate to funnel of 40mm dia G.I pipe including all accessories \n | 1 | Each | |
76 | 76 | Extra copper flat 25 X 5mm | 15 | Mtr. | |
77 | 77 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.)\n8way double door | 6 | Each | |
78 | 78 | Supply and fixing of 5Amp to 32A rating 240V "B" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S)\nSingle pole (SP) | 30 | Each | |
79 | 79 | Supply and fixing of 5Amp to 32A rating 240V "B" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S)\n63Amp DP MCB | 6 | Each | |
80 | 80 | S/F of 100AMP 25KA MCCB with MS box including both side connections with all complete(make- Legrand /Schnieder/Siemens.) | 2 | Each | |
81 | 81 | S/F of 250AMP 50KA MCCB of Hager/Legrand/C&S Make with MS box including both side connections with all complete.\n\n | 1 | Each | |
82 | 82 | Supply and fixing of copper bus bar with suitable sheet metal enclosure on MS angle frame with proper grouting on wall including all connections. \n100Amp TPN bus bar-300 X 32 X 3mm size | 2 | Each | |
83 | 83 | Supply and fixing of copper bus bar with suitable sheet metal enclosure on MS angle frame with proper grouting on wall including all connections. \n200Amp TPN bus bar -350 X 32 X 6mm size | 1 | Each | |
84 | 84 | S/F 1' X 18watt LED fitting( Make-Bajaj/ Philips /Crompton) | 31 | Each | |
85 | 85 | S/F of 18Watt White Circular/Square Surface LED fitting (Make-Havells/Philips/C&S/Crompton) | 12 | Each | |
86 | 86 | S/F of 36W 2'X2' Surface/recessed on Ceiling LED fitting (Make-Havells/Philips/C&S/Crompton) | 13 | Each | |
87 | 87 | S/F of 45W LED street light fitting (Make-Havells/Philips/C&S/Crompton) | 5 | Each | |
88 | 88 | Supply and fixing of changeover switch (Anchor/ Havells/ Apex)\n100 amp four pole (3pole neutral) | 1 | Each | |
89 | 89 | S/F of 1200mm High speed Ceiling fan, Heavy Duty,durable, copper winding,Aluminium blade(ISI mark)\nCrompton Grave/Khaitan/Orient/Polycab/Bajaj\n | 22 | Each | |
90 | 90 | S/F of Exhaust fan 10"/12" size(ISI mark)\nCrompton Grave/Khaitan/Orient/Polycab/Bajaj\n | 1 | Each | |
91 | 91 | Supply of 50sqmm 3 1/2 core(Make- Glowstar/ Polycab/Nicco/KEI as per letter No-309 19.1.2011 of SEEC (R&B) Odisha) | 30 | Mtr. | |
92 | 92 | Supply of 185sqmm 3 1/2 core(Make- Glowstar/ Polycab/Nicco/KEI as per letter No-309 19.1.2011 of SEEC (R&B) Odisha) | 50 | Mtr. | |
93 | 93 | Cable laying on wall surface with steel shaddle \n | 30 | Mtr. | |
94 | 94 | Trenching with sand spreading and bricks laying and laying of cable in trench in 2 1/2' depth .pvc cable exceeding 120sqmm to 400sqmm | 50 | Mtr. | |
95 | 95 | Electronics step type Regulator(cona/Anchor/Usha/bajaj) | 22 | Each | |
96 | 96 | Supply and fixing of extra down rod\n20mm dia for 20cm x 5 | 22 | Each | |
97 | 97 | S/F of fan Hook | 22 | Each | |
98 | 98 | S/F of computer board consisting 2 nos 5amp and switch and socketand 1 nos 15amp and switch and socket | 13 | Nos | |
99 | 99 | S/F of Fire Extinguisher 4.5 Kg in one glimmered for protection of fire ISI marked | 8 | Each | |
100 | 100 | Supply and drawing of following size PVC insulated single core multistrand copper conductor in existing surface/recessed/STEEL / conduit as required. \n1 X 1.5sqmm | 145 | Mtr. | |
101 | 101 | PART-C - (P.H. WORKS)\nSupplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor IS marked galvanised mild steel tubes (medium grade) confirming to IS: 1239/1990, part-1 of the following nominal bore, tube fittings and clamps including making good the wall , ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. 25mm dia GI pipe (In ground floor) | 8.1 | Each Mtr. | |
102 | 102 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor IS marked galvanised mild steel tubes (medium grade) confirming to IS: 1239/1990, part-1 of the following nominal bore, tube fittings and clamps including making good the wall , ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. 40mm dia GI pipe (In ground floor) | 35 | Each Mtr. | |
103 | 103 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor IS marked galvanised mild steel tubes (medium grade) confirming to IS: 1239/1990, part-1 of the following nominal bore, tube fittings and clamps including making good the wall , ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. 25mm dia GI pipe (In first floor) | 40 | Each Mtr. | |
104 | 104 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor IS marked galvanised mild steel tubes (medium grade) confirming to IS: 1239/1990, part-1 of the following nominal bore, tube fittings and clamps including making good the wall , ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. 40mm dia GI pipe (In first floor) | 50 | Each Mtr. | |
105 | 105 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-pvc pipes and pipe fittings of the following nominal borewith clamps including making good the wall , ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. 20mm C-PVC pipes (In ground floor) | 20 | Each Mtr. | |
106 | 106 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-pvc pipes and pipe fittings of the following nominal borewith clamps including making good the wall , ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. 25mm C-PVC pipes (In ground floor) | 20 | Each Mtr. | |
107 | 107 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-pvc pipes and pipe fittings of the following nominal borewith clamps including making good the wall , ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. 20mm C-PVC pipes (In first floor) | 10 | Each Mtr. | |
108 | 108 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-pvc pipes and pipe fittings of the following nominal borewith clamps including making good the wall , ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. 25mm C-PVC pipes (In first floor) | 8 | Each Mtr. | |
109 | 109 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. all complete as per P.H. specification and direction of E.I.C. 250 mm thick wall in GF | 4 | Each | |
110 | 110 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. all complete as per P.H. specification and direction of E.I.C. 250 mm thick wall in FF | 6 | Each | |
111 | 111 | supplying all materials, labour, T&P and cutting holes in R.C.C. floors, roofs, erc. up to 19 Cm. thick for passing G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. and reparing the holes after insertion of pipes etc. with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of E.I.C. In Ground floor | 4 | Each | |
112 | 112 | supplying all materials, labour, T&P and cutting holes in R.C.C. floors, roofs, erc. up to 19 Cm. thick for passing G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. and reparing the holes after insertion of pipes etc. with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of E.I.C. In First floor | 8 | Each | |
113 | 113 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. In Ground floor | 40 | Each \nMtr. | |
114 | 114 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. In First floor | 18 | Each \nMtr. | |
115 | 115 | Supplying all materials, labour, T&P and painting two coats with white enamel paint brushing interior over one coat of priming with red oxide zinc chrome primer on the external surface of new galvanised mild steel tubes and fittingfs of following nominal diameter to give an even shade including preparing the surface and cleaning the surface of all dirt, dusts and foreign matters as per direction of the E-I-C. 25mm to 32mm dia (In Ground floor) | 8.1 | Each \nMtr. | |
116 | 116 | Supplying all materials, labour, T&P and painting two coats with white enamel paint brushing interior over one coat of priming with red oxide zinc chrome primer on the external surface of new galvanised mild steel tubes and fittingfs of following nominal diameter to give an even shade including preparing the surface and cleaning the surface of all dirt, dusts and foreign matters as per direction of the E-I-C. 40mm to 50mm dia (In Ground floor) | 35 | Each \nMtr. | |
117 | 117 | Supplying all materials, labour, T&P and painting two coats with white enamel paint brushing interior over one coat of priming with red oxide zinc chrome primer on the external surface of new galvanised mild steel tubes and fittingfs of following nominal diameter to give an even shade including preparing the surface and cleaning the surface of all dirt, dusts and foreign matters as per direction of the E-I-C. 25mm to 32mm dia (In First floor) | 40 | Each \nMtr. | |
118 | 118 | Supplying all materials, labour, T&P and painting two coats with white enamel paint brushing interior over one coat of priming with red oxide zinc chrome primer on the external surface of new galvanised mild steel tubes and fittingfs of following nominal diameter to give an even shade including preparing the surface and cleaning the surface of all dirt, dusts and foreign matters as per direction of the E-I-C. 40mm to 50mm dia (In First floor) | 50 | Each Mtr. | |
119 | 119 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.15mm dia Cp Long body bib cock (Plaza/Aquatic/Amber) | 2 | Each | |
120 | 120 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.15mm dia CP angle stop cock (Plaza/Aquatic/Amber) | 5 | Each | |
121 | 121 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.20mm dia CP concealed stop cock (jaquar make) | 1 | Each | |
122 | 122 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.15mm dia Cp Sink cock (Plaza/Aquatic/Amber) | 5 | Each | |
123 | 123 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.15mm dia Cp Pillar cock (Plaza/Aquatic/Amber) | 3 | Each | |
124 | 124 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.25mm dia brass or gun metal full way valve(shakti make) | 6 | Each | |
125 | 125 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.40mm dia brass or gun metal full way valve(shakti make) | 4 | Each | |
126 | 126 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.15mm dia CP Flange | 13 | Each | |
127 | 127 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.15mm dia CP Extention Nipple | 13 | Each | |
128 | 128 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.125mm CP grating | 14 | Each | |
129 | 129 | Supplying all materials, labour, T&P and fitting and fixing CP shower with 15mm or 20mm inlet including polishing all complete as per specification and direction of the Engineer in charge. 15mm dia CP revolving shower with 15mm x 225mm long size CP shower arm | 1 | Each | |
130 | 130 | Supplying all materials, labour, T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701--1996 including cutting holes through the tank and fixing mild steel ltubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting up to a height of 5 meters above ground level and placing the tank to the required position and providing 1st class K.B.Brick work in cement mortar (1:6) of 0.46mt. height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C.slab of size 1.60mt.x1.60mt. and 0.10mt. thick, R.C.C.beam of 0.25mt.x0.30mt. and 2.60mt. average length in cement concrete (1:2:4) using 12mm size h.g.chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. 2000 litre capacity water storage tanks on roof of FF | 2 | Each | |
131 | 131 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm diameter U-PVC SWR pipes(Supreme/Ashirvad) | 42 | Each Mtr. | |
132 | 132 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 75mm diameter U-PVC SWR pipes(Supreme/Ashirvad) | 6 | Each Mtr. | |
133 | 133 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm U-PVC door Tee | 2 | Each | |
134 | 134 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm U-PVC offset | 8 | Each | |
135 | 135 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm U-PVC door bend | 9 | Each | |
136 | 136 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm U-PVC plain shoe bend | 1 | Each | |
137 | 137 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm U-PVC cowl | 1 | Each | |
138 | 138 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm P-trap | 3 | Each | |
139 | 139 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm U-PVC plain Tee | 2 | Each | |
140 | 140 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm U-PVC plain bend | 3 | Each | |
141 | 141 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 75mm U-PVC plain bend | 2 | Each | |
142 | 142 | Supplying all materials,labour T&P and cutting holels through existing brick or laterite masonry wall for taking H.C.I pipes and fittings including making good the damages etc. all complete as per P.H.Specification and direction of the Engineer in charge. 250mm to 375mm thick wall | 12 | Each | |
143 | 143 | Supplying all materials, labour T&P and and fixing 10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer in charge. 10 Liters capacity PVC cistern with 32mm dia flush bend(Parryware/Hindware/Neycer/Rak) | 1 | Each | |
144 | 144 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge. 580mm size Orissa pan(Parryware/Hindware/Neycer/Rak) | 1 | Each | |
145 | 145 | Supplying all materials,labour, T&P and fixing laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs,screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge. 600mmx450mmx200mm size Porcelain Sink | 5 | Each | |
146 | 146 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks (Plaza make)and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge. 550mmx400mm W.H.basin with porcelain pedestal & Jaquar make fittings(Parryware/Hindware/Neycer/Rak) | 4 | Each | |
147 | 147 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks (Plaza make)and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge. Under counter wash basin | 3 | Each | |
148 | 148 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge. 600mmx450mm size B.E.mirror | 8 | Each | |
149 | 149 | Supplying all materials, labour, T&P and fixing standard size glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. 600mmx125mm glass shelf with CP/NP guard rails | 4 | Each | |
150 | 150 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. 25mmx600mm long CP towel rail | 1 | Each | |
151 | 151 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. towel ring | 8 | Each | |
152 | 152 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. CP soap holder | 6 | Each | |
153 | 153 | Supplying fitting and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mmx19mm for stile & 15mmx15mm for top and bolt rails set with PVC door frame(Choukatha)of size 50mmx47mm is made out of 5cm thick sheet properly joined with solvent cement adhesive as per section view with MS square tube of 19mm of 19mm gauge to be inserted inside to give extra structural strength the price is inclusive of all cost of all materials labour,T&P etc.complete in all respect as per direction of the Engineer-in-charge. | 1.5 | Each Sqm | |
154 | 154 | Supplying all materials, labour, T&P and filling in foundaton and plint with sand well watered and rammed including conveyeance of all materials to worksite,payment of royalty, taxes etc all complete as per direction of the Engineer in charge. | 1.11 | Each Cum | |
155 | 155 | Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 40mm H.G metal including watering, curing and conveyance of all materials to site. | 0.37 | Each Cum | |
156 | 156 | Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C. | 0.29 | Each Cum | |
157 | 157 | Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage. | 0.1 | Each Qntl | |
158 | 158 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor. | 1.2 | Each Sqm | |
159 | 159 | Supplying all materils, labour, T&P providing ceramic tile in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement 1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer-in-charge(size 30x30cm,Kajaria/Somany/Johnson/Orient Bell make to be pre-approved by the EIC). | 3.71 | Each Sqm | |
160 | 160 | Supplying all materils, labour, T&P providing ceramic tile in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement 1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer-in-charge(size 30x30cm,Kajaria/Somany/Johnson/Orient Bell make to be pre-approved by the EIC). Granite Slab -3x3x0.75x0.60= | 4.05 | Each Sqm | |
161 | 161 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork inclding watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge | 15.75 | Each Sqm | |
162 | 162 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge(size 45x30cm,Kajaria/Somany/Johnson/Orient Bell make to be pre-approved by the EIC). | 15.75 | Each Sqm | |
163 | 163 | Supplying all materials, labour, T&P and fixing Kodappa tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge | 4.05 | Each Sqm | |
164 | 164 | Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , K.B. brickwork in CM ( 1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing , specification and direction of Engineer in charge 250mmx250mm with RCC cover | 7 | Each | |
165 | 165 | Supplying all materials, labour, T & P and constructing Inspection chamber of the following inside size with CC (1:3:6) mix using 40mm size h.g. metal on bed, Ist class K.B. brickwork in CM ( 1:6) , moulding and shaping the channel inside and benching with CC (1:2:4) using 12mm size h.g. chips, 12mm thick cement plastering (1:3) finished with punning to inside , cement flush pointing (1:3) to outside , R.C.C. cover slab in ( 1:2:4) using 12mm size h.g. chips with RCC man hole cover , earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering ,curing, conveyance of all materials to worksite , payment of royality , taxes etc. all complete as per aproved drawing , specification and direction of Engineer in charge. Inside size 760mm x760mm x460mm | 3 | Each | |
166 | 166 | Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Man hole chamber Inside size 910mmx910mmx910mm | 1 | Each | |
167 | 167 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia u-pvc pipe alround concrete | 8.9 | Each Mtr. | |
168 | 168 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only. Drilling of 200mm dia bore 0mtr to 45mtr | 45 | Each Mtr. | |
169 | 169 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only.Drilling of 150mm dia bore 46mtr to 100mtr | 75 | Each Mtr. | |
170 | 170 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. Lowering of 200mm dia GI/P.V.C/MS casing pipes 0 mtr to 45 mtrs | 45 | Each Mtr. | |
171 | 171 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.Cost of 200mm dia P.V.C schedule-80 pipe | 46 | Each Mtr. | |
172 | 172 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge. By DTH/Rotary Rig | 1 | Each | |
173 | 173 | Supplying all materials and labour,tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level(as per drawing)to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock the bottom to ensure sanitary sealing(excluding cost of cement which willbe supplied by the Department). Sanitary sealing upto 5mtrs below ground level. | 1 | Each | |
174 | 174 | Supplying all materials and labour,tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level(as per drawing)to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock the bottom to ensure sanitary sealing(excluding cost of cement which willbe supplied by the Department). CC(1:2:4)with 12mm chips for grouting upto 5 mtr.Depth in sanitary sealing. | 0.2 | Each Cum | |
175 | 175 | Supplying all materials, labour, tools and plant and withdrawing casing pipesfrom the unsuccessful boreand depositing in the departmental storein good condition. Withdrawal of casing pipes | 45 | Each Mtr. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail