| 1 | 0.01 | PART- B (Item Rate Basis) | 1 | | |
|---|
| 2 | 1 | SITC of Cable Manager, Table Mount Modular Multi-Connection Solution with Retractable Lid with 1 HDMI, 1 VGA with audio, 2 LAN inputs & 2 Universal AC Power Outlet, etc.\nBrand Options:- Crestron / Kramer/ Lightware | | 7 | NOS |
|---|
| 3 | 2 | SITC of 4K Presentation Matrix Switcher Cum Scaler, 4 HDMI, 4 Universal analog video (on 15–pin D–sub connectors), 2 Display Port inputs each with embedded analog audio inputs, Scaled outputs: 2 HDMI, 1 DisplayPort, 1 computer graphics on a 15–pin HD connector Outputs with de-embedded analog audio, 2K and 4K support, HDTV Compatible, HDCP Compliant, Auto–input Switching, Toggles between the PIP mode and the PREVIEW mode, Audio Breakaway & AFV Support, DSP technology including audio equalization, mixing, delay and more, Scales & Zooms — Controllable through Ethernet and RS-232 etc complete as required.\nBrand Options:- Crestron / Kramer/ Lightware | | 2 | NOS |
|---|
| 4 | 3 | SITC of 1:4 4K60 4:4:4 HDR Distribution Amplifier, 1 HDMI input & 4 HDMI outputs, 2K and 4K support, HDTV Compatible, HDCP 2.2 & HDR10 Compliant, Bandwidth — Up to 17.82Gbps, Simple, intelligent EDID operation, HDCP ON/OFF control, etc.\nBrand Options:- Crestron / Kramer/ Lightware | | 3 | NOS |
|---|
| 5 | 4 | SITC of Control System should be equipped with at least 4 bidirectional RS-232 serial ports, at least 4 IR ports, at least 4 Digital I/O ports, at least 4 low voltage relays for controlling room functions, at least 1 Ethernet monitoring and control port, RAM 512MB, Flash Memory 4GB, includes Rack mounting (1U), etc.\nBrand Options:- Crestron / Kramer/ Lightware | | 2 | NOS |
|---|
| 6 | 5 | SITC of Wireless presentation devices supports video resolution upto 1080p (Full HD), with HDMI output, 1 Ethernet port, 4 USB port for connecting keyboard, mouse & other USB devices, Supports Windows laptops and MAC, as well as iOS, Windows and Android mobile operating systems, display minimum 2 users screen through HDMI output, Supports DHCP, Analog audio out, supports Airplay, etc.\nBrand Options:- Crestron / Kramer/ Lightware | | 2 | NOS |
|---|
| 7 | 6 | SITC of Wi-Fi Router with 2.4 GHz WLAN, WPS, 5 GHz WLAN, Internet, Should have reset button & power switch, Should be 802.11ac Wi-Fi specification, WPA/WPA2 encryption to secure your wireless traffic\nBrand Options:- D-Link / Netgear / TP Link | | 2 | NOS |
|---|
| 8 | 7 | Supply and Laying of 15.2 Metres Active HDMI patch cord in existing conduit.\nBrand Options:- Crestron / Kramer/ Lightware | | 16 | NOS |
|---|
| 9 | 8 | Supply and Laying of 10.7 Metres HDMI patch cord in existing conduit.\nBrand Options:- Crestron / Kramer/ Lightware | | 4 | NOS |
|---|
| 10 | 9 | Supply and Laying of 15.2 Metres VGA with Audio patch cord in existing conduit.\nBrand Options:- Crestron / Kramer/ Lightware | | 4 | NOS |
|---|
| 11 | 10 | Supply and Laying of 10.7 Metres VGA with Audio patch cord in existing conduit.\nBrand Options:- Crestron / Kramer/ Lightware | | 4 | NOS |
|---|
| 12 | 11 | Supply and Laying of 1.8 Metres HDMI patch cord in existing conduit.\nBrand Options:- Crestron / Kramer/ Lightware | | 15 | NOS |
|---|
| 13 | 12 | Supply and Laying of 1.8 Metres HDMI patch cord in existing conduit.\nBrand Options:- Crestron / Kramer/ Lightware | | 7 | NOS |
|---|
| 14 | 13 | Supply and Laying of 4K HDMI (Male) to DisplayPort (Female) adaptor cable, with USB power in existing conduit.\nBrand Options:- Crestron / Kramer/ Lightware | | 1 | NOS |
|---|
| 15 | 14 | Supply and Laying of 1.8 Meters 4K DisplayPort patch chord in existing conduit.\nBrand Options:- Crestron / Kramer/ Lightware | | 1 | NOS |
|---|
| 16 | 15 | Supply and Laying of 1.8 Metres Mini DisplayPort to DisplayPort patch cord in existing conduit.\nBrand Options:- Crestron / Kramer/ Lightware | | 2 | NOS |
|---|
| 17 | 16 | Supply and Laying of 2 Core 20 AWG routing balanced mono or unbalanced stereo mic or line level audio signals or Control singnals cable in existing conduit.\nBrand Options:- Crestron / Kramer/ Lightware | | 1 | LOT |
|---|
| 18 | 17 | Supply and Laying of 16 AWG 2 Core Speaker cable in existing conduit.\nBrand Options:- Crestron / Kramer/ Lightware | | 1 | LOT |
|---|
| 19 | 18 | SITC of 1:2 4K60 4:4:4 HDR Distribution Amplifier, 1 HDMI input & 2 HDMI outputs, 2K and 4K support, HDTV Compatible, HDCP 2.2 & HDR10 Compliant, Bandwidth — Up to 17.82Gbps, Simple, intelligent EDID operation, HDCP ON/OFF control, etc.\nBrand Options:- Crestron / Kramer/ Lightware | | 1 | NOS |
|---|
| 20 | 19 | SITC of Video conference unit with full HD camera with HDMI output Should be Codec and hardware based unit, built-in Multiconference capability to connect at least 1+3 sites Soft Client based solution is not acceptable. 5K UltraHD camera , 3 x Digital Zoom ? Supports up to 60 fps (max 30 fps with speaker tracking and best overview enabled), FULL HD 1080 P IMAGE QUALITY, All the VC components like VC Endpoint should be from the same OEM. \nBrand Options:- Polycom / Cisco / Lifesize | | 1 | NOS |
|---|
| 21 | 20 | Supply , Installation testing and commissioning of Portable Digital Chairman & Delegate Unit with inbuilt speaker, Frequency response((channel selector) 70 Hz-15 kHz or better; Frequency range(loudspeaker) 150 Hz-15 kHz or Better and THD\n< 0.1 % or better with Signal-to-noise ratio > 90 dBA or better and should have Two 3.5 mm headphone jacks with individual volume controls and dual led\nDisplay, female socket TRS..\nBrand Options:- Bosch / Shure / Sennheiser | | 8 | NOS |
|---|
| 22 | 21 | Supply , Installation testing and commissioning of Dualflex gooseneck microphone with Frequency response-50 to 17,000 Hz or better with 10-pin modular connector-Length 40 cm ,Polar Pattern- cardioid,Maximum SPL (1 kHz at 1% THD) -121 dB SPL or better along with Two-color illuminated light ring\non microphone capsule.\nBrand Options:- Bosch / Shure / Sennheiser | | 18 | NOS |
|---|
| 23 | 22 | Supply, installation testing and commissioning of central control unit shall provide fully digital audio transmission and control of chairman and delegate units, controller can control up to 250 number of discussion units and also have capability to open up to 8 floor mics simultaneously and should have 2 languages with support up to 32 interpreter units,Input Impedance 50-100 kO or better,Frequency response 65 Hz-16 kHz or better,Signal-to-noise ratio > 85 dBA or better and should upport for four microphone operation modes: Automatic, FIFO, Manual, and VOX (voice activated),THD should be < 0.1 % or better,Sound quality 24 bit audio, 32 kHz sampling frequency along with 2 analog input and 8 analog output and should include power supply and required License to run the required number of conference units and also includes Redundant Interface Box,If a conference unit\nfails, the remaining units are not affected. | | 1 | NOS |
|---|
| 24 | 23 | Supply , Installation testing and commissioning of Audio Conferencing Processor with Frequency Response of 20 to 20,000 Hz along with 10 Dante input channel along with 2 Dante output channels, processor should have 8 port AEC along with USB interface & TRRS,Dante digital Audio Sampling Rate:48 kHz or better, Total Harmonic Distortion\n<0.05% or better and Common Mode Rejection Ratio should be 150? balanced source @ 1 kHz >50 dB or better, Common Mode Rejection Ratio 150?\nbalanced source @ 1 kHz >50 dB, Dante Digital Audio - Sampling Rate 48 kHz & Bit Depth 24 along with USB Audio - Sampling Rate 48 kHz\n& Bit Depth 16, 24.\nBrand Options:- Bosch / Shure / Sennheiser | | 1 | NOS |
|---|
| 25 | 24 | Supply , Installation testing and commissioning of Audio Network Interface( XLR connector),shall convert 2 analog audio channels into independent digital audio input channels on a Dante™ network. Microphone, Power over Ethernet (PoE).Frequency Response 20 to 20,000 Hz or better,Latency-0.35 ms or better, Total Harmonic Distortion-<0.05% or better,Input Impedance-5 kO or better,Output\nImpedance-150 O or better.\nBrand Options:- Bosch / Shure / Sennheiser | | 2 | NOS |
|---|
| 26 | 25 | Supply , Installation testing and commissioning of Wireless Handheld microphone with Audio Frequency Response: 45 Hz, Maximum: 15 kHz (± 2 dB) and Audio Output Level: (ref. ± 38 kHz deviation with 1 kHz tone),Cardioid polar pattern, XLR connector (into 600 O load): –13 dBV ¼ inch connector (into 3000 O load): –2 dBV Sensitivity:\n–105 dBm for 12 dB SINAD, typical Image Rejection\n>70 dB, typical Power: 12–18 Vdc at 150 mA,Total Harmonic Distortion:0.5%;Supporting up to 20 compatible systems with Audio Input Level: -8 dBV maximum at 0dB position Operating range: 100 m (300 ft.), 2 “AA” size alkaline or rechargeable batteries Battery Life (alkaline): >8 hours, microphone should have Rugged metal construction.\nBrand Options:- Sennheiser / Shure / lectrosonics | | 3 | NOS |
|---|
| 27 | 26 | Supply , Installation testing and commissioning of Solid State Recorder with supported media formats are SD card(512MB - 2GB)/SDHC(4GB -\n32GB)card,USB memory(512MB - 64GB and also supports USB2.0 or better-HIGH SPEED(480Mbps),Recording formats- WAV(Stereo/Mono, 44.1kHz/48kHz, 16/24- bit,)MP3(Stereo/Mono, 44,1kHz/48kHz, 64kbps- 320kbps),AES/EBU-Connector-XLR-3-32 × 1 or better, Output impedance-110O or better,Format-AES3- 2003/IEC60958-4 (AES/EBU) or better, Supported\nsampling frequencies-44.1k / 48k / 96k Hz or better.\nBrand Options:- Tascam / Marantz / Rolls | | 2 | NOS |
|---|
| 28 | 27 | Supply , Installation testing and commissioning of 6 inch shotgun microphone with Frequency response-50 to 17,000 Hz or better,Polar Pattern-Lobar,Transducer Type-Electret Condenser,Output Impedance-170 or better and should have Features a 100-degree pickup area, narrower than a supercardioid or cardioid,Maximum SPL (1 kHz at 1% THD) -121 dB SPL or better. \nBrand Options:- Bosch / Shure / Sennheiser | | 6 | NOS |
|---|
| 29 | 28 | Supply , Installation testing and commissioning of Wireless digital Chairman conference unit with 4.3 inch touch screen display to vote,view agenda or speaker information, Microphone On/ Off Push button to activate/deactivate the microphone with inbuilt speaker, Frequency response: should fall in audible range 20Hz - 20kHz (+0.5dB/-3dB) with Excellent RF Noise Immunity and Total Harmonic Distortion + Noise 0.04% or Better, Dual 3.5mm headphone jacks with volume controls and a mini USB connector, The unit shall include a smart rechargeable Li-Ion battery which shall last over 11 hours fully burdened. The battery shall be easily removable from the unit, Gooseneck microphones include interchangeable cartridges along\nwith AES-128 wireless encryption for enhanced privacy .\nBrand Options:- Bosch / Shure / Sennheiser | | 16 | NOS |
|---|
| 30 | 29 | Supply , Installation testing and commissioning of central control unit with Frequency response : must fall in audible range 22Hz - 20kHz (+0.5dB/-3dB) or better, Total Harmonic Distortion + Noise : less than 0.3 % or better, Operating temperature : 7 to 49 ºC or better, Should be able to operate up to 125 conferencing inputs without any software or accessories, Operates in 2.4 GHz / 5 GHz frequency bands, including DFS spectrum and also have AES-128 wireless encryption for enhanced privacy, Device should work on one Ethernet cable for audio, control, and PoE power and Device should have Dante digital audio (10 inputs/10 outputs) or better along with 8 or more Interpretation Channels or better, Maximum 8 active microphones, Device should have intelligent Interference detection & Avoidance, Output Power-1mW (Low), 5mW (Medium), 13mW (High),25mW (Maximum),Provide automatic frequency coordination, interference detection and avoidance with Dual-RF sections (Spectrum Manager).\nBrand Options:- Bosch / Shure / Sennheiser | | 1 | NOS |
|---|
| 31 | 30 | Supply , Installation testing and commissioning of Audio Conferencing Processor with Frequency Response of 20 to 20,000 Hz along with 10 Dante input channel along with 2 Dante output channels, processor should have 8 port AEC along with USB interface & TRRS,Dante digital Audio Sampling Rate:48 kHz or better, Total Harmonic Distortion <0.05% or better and Common Mode Rejection Ratio should be 150? balanced source @ 1 kHz >50 dB or better, Common Mode Rejection Ratio 150? balanced source @ 1 kHz >50 dB, Dante Digital Audio - Sampling Rate 48 kHz & Bit Depth 24 along with USB Audio - Sampling Rate 48 kHz\n& Bit Depth 16, 24.\nBrand Options:- Bosch / Shure / Sennheiser | | 1 | NOS |
|---|
| 32 | 31 | Supply , Installation testing and commissioning of Charging Unit with Have capability to Charges 10 batteries to 50% charge in 1.5 hours, 100% charge in 4 hours or better, Device should have RJ45 Ethernet connection enables remote monitoring of battery charge status, Device Should include 5-segment LEDs on the unit display charge status individually for every battery, accommodates up to 10 rechargeable batteries, Device should have Networking Addressing Capability DHCP or Manual IP address, Remote monitoring of battery life remaining in hours and minutes, Selectable storage mode partially discharges batteries for long-\nterm storage.\nBrand Options:- Bosch / Shure / Sennheiser | | 2 | NOS |
|---|
| 33 | 32 | Supply , Installation testing and commissioning of 10 channel Analog mixer with 4 mic/line inputs,2 stereo inputs along with 2 auxes or better and mixer should have 12 bar meters along with 3 band eq or better,also\nhave 48V microphone phantom power.\nBrand Options:- Yamaha / Midas / Allen & Heath | | 1 | NOS |
|---|
| 34 | 33 | SITC of 22 U Equipment Rack for housing all rack mountable Equipments with internal wiring, front glass door; heat dissipation fans; movement wheels, power distribution units etc.\nBrand Options:- Branded | | 2 | NOS |
|---|
| 35 | 34 | Supply and laying of 30 meter Cat 5e STP cable for\nconference units as per tender specifications.\nBrand Options:- Bosch / Shure / Sennheiser | | 4 | NOS |
|---|
| 36 | 35 | Supply & laying of 20 Meter CAT6 Shielded twisted pair\npatch cable.\nBrand Options:- Klotz / Shure / Beldon | | 1 | NOS |
|---|
| 37 | 36 | Supply , Installation testing and commissioning of L2,180W 8-Port Gigabit Smart PoE Plus Managed\nSwitch.\nBrand Options:- Zyxel / Cisco / Brocade | | 4 | NOS |
|---|
| 38 | 37 | Supply and laying of 20 meter Cat 5e STP cable for\nconference units as per tender specifications.\nBrand Options:- Bosch / Shure / Sennheiser | | 3 | NOS |
|---|
| 39 | 38 | Supply and laying of 10 meter Cat 5e STP cable for\nconference units as per tender specifications.\nBrand Options:- Bosch / Shure / Sennheiser | | 4 | NOS |
|---|
| 40 | 39 | Supply and laying of 05 meter Cat 5e STP cable for\nconference units as per tender specifications.\nBrand Options:- Bosch / Shure / Sennheiser | | 4 | NOS |
|---|
| 41 | 40 | Supply and laying of 03 meter Cat 5e STP cable for\nconference units as per tender specifications.\nBrand Options:- Bosch / Shure / Sennheiser | | 4 | NOS |
|---|
| 42 | 41 | Supply and laying of 02 meter Cat 5e STP cable for\nconference units as per tender specifications.\nBrand Options:- Bosch / Shure / Sennheiser | | 4 | NOS |
|---|
| 43 | 42 | Supply and laying of 01 meter Cat 5e STP cable for\nconference units as per tender specifications.\nBrand Options:- Bosch / Shure / Sennheiser | | 1 | NOS |
|---|
| 44 | 43 | Supply & laying of Microphone Cable 2 core PVC\ninsulated Cu conduction shielded microphone cable \nBrand Options:- Klotz / Sommer / Gotham | | 500 | NOS |
|---|
| 45 | 44 | Supply , Installation testing and commissioning of UL listed connectors for all Equipments.\nBrand Options:- Branded | | 2 | NOS |
|---|
| 46 | 45 | Supply, Installation, testing and commissioning of High SPL in ceiling premium loudspeaker with 8” Woofer, HF compression driver and in built 2 way passive crossover. The usable frequency range shall be 45HZ - 20KHz or better, and shall be rated for 150W RMS or better long term power handling with a max continuous SPL of 118dB or better. Shall offer Low impedance (8 Ohms) or 70/100 V operation with 80/40/20W power tap settings. The loudspeaker shall offer a Horizontal dispersion of 180 degrees with a vertical dispersion of 75 degrees or better suitable for mounting at room edges along the length of the room. Shall include standard accessories needed for Ceiling flush installs.\nBrand Options:- Bose / EAW / Extron | | 4 | NOS |
|---|
| 47 | 46 | SITC of Digital Audio DSP with 32-bit fixed/floating-point DSP 456 MHz/ARM Cortex-A8 600MHz Processor, Balanced Analog I/O – 12 inputs (routable to AEC), 8 outputs, GPIO – 5x5 expandable general-purpose control, Network Port – Interfaces with 3rd party control, Dante Network Port – 64 x 64 channel, 1 Gbps, 2-Line VoIP – SIP 2.0-Compliant IT web configuration page, USB Port – Micro-B USB for PC soft codecs with stereo input and output, 8-channel uncompressed, ultra-low latency digital audio, Serial Port – 3-wire RS-232C (DTE) serial interface connection, CC-16 – CC-16 user controls, PSTN (RJ-11) – Supports worldwide analog telephone connection, Dynamic Range > 115 dB, A-weighted 20 Hz – 20 kHz, analog input to analog output; Maximum Input Level +24 dBu; Equivalent Input Noise -118 dB at 48 dB gain setting; Phantom Power +48 VDC, 10 mA, selectable per input; Output Channels 8 balanced, line level\nBrand Options:-Bose / Bi-amp / Symetrix | | 2 | NOS |
|---|
| 48 | 47 | Supply,installation, testing & Comissioning of Class D configurable amplifier with total 600W output power or better across 4 outputs, 4/8ohms, 70/100 Volt or mixed use operation; Frequency Response : 20Hz - 20kHz for LZ mode ; S/N Ratio > 99db and THD <.3% at rated output complete with standard accessories as required. Built in DSP for Matrix routing, Speaker EQs, delays etc. Phoenix Input and output terminals, shall support remote Volume controllers (wired) for individual channels. Shall also have built in 4 channel or better Digital Audio input port Compatible with offered DSP\nBrand Options:-Powersoft / Ashly Audio / Bose | | 2 | NOS |
|---|
| 49 | 48 | Supply and laying of Cat 5e STP cable as per tender specifications.\nBrand Options:-Klotz / Sommer / Gotham | | 1 | LOT |
|---|
| 50 | 49 | Supply & laying of speaker Cable 2 core \nBrand Options:-Klotz / Sommer / Gotham | | 200 | NOS |
|---|
| 51 | 50 | Supply, Installation, testing and commissioning of High SPL in ceiling premium loudspeaker with 8” Woofer, HF compression driver and in built 2 way passive crossover. The usable frequency range shall be 45HZ - 20KHz or better, and shall be rated for 150W RMS or better long term power handling with a max continuous SPL of 118dB or better. Shall offer Low impedance (8 Ohms) or 70/100 V operation with 80/40/20W power tap settings. The loudspeaker shall offer a Horizontal dispersion of 90 degrees with a vertical (preferably asymmetric) dispersion of 75 degrees or better suitable for mounting in room corners. Shall include standard accessories needed for Ceiling flush installs. \nBrand Options:-Bose / EAW / Extron | | 4 | NOS |
|---|
| 52 | 51 | Supply , installation , testing and comissioning of Dante based 8 Channel Mic-line Undertable box type Input expander for Audio DSP, Shall support analog Input, POE Dante connection and Loopthru, Logic I/O for input routable to Dante network, Switchable Phantom power, Selectable Gain and POE as well as Local power supply support. \nBrand Options:-Bose / Bi-amp / Symetrix | | 1 | NOS |
|---|
| 53 | 52 | SITC of Channel AEC expansion with multiple references to complement processors in larger systems. Adaptable noise cancellation with non-linear processing and comfort noise on each AEC channel enhances clarity. Dante audio networking supports 16 x 16 audio channels for connection. Front-panel interface features a large OLED display and rotary encoder for setting network parameters and monitoring channel activity\nBrand Options:-Bose / Bi-amp / Symetrix | | 1 | NOS |
|---|
| 54 | 53 | SITC of laser Projector having output of 7500 lumens with a native resoultion 1920X1200 WUXGA ,contrast ratio 4000000:1,input HDMI,HDbaseT,3D keystone,USB Input RCA, complete with lens and other accessories, should have standard 3 years warrenty.\nBrand Options:- Christie / Barco/ NEC | | 1 | NOS |
|---|
| 55 | 54 | Motorised Tab tensioned screen 150\" diagonal 16:9 viewing area - H 74\" x W 131\" \nBrand Options:- Branded | | 1 | NOS |
|---|
| 56 | 55 | SITC of 55\" screen. Should have Brightness 350 nit or more; panel type VA; Operation- 16/7 hr; Minimum Resolution- 3840*2160 (4K UHD) Native contrast ratio- (4000:1). Color Gamut: Minimum Response time-8 ms; Display Colors- 1.07 billion or above; Minimum haze-2%; Speakers (inbuilt)- 10 w + 10 w or 20 w minimum; Storage (min)- 8 GB FDM; Inputs- DVI-D,HDMI 2.0 X 2,\nUSB 2.0 x 1 , Audio Input X 1; Output- Stereo Mini Jack Dynamic; C/R: MEGA; Maximum power consumption; Maximum power consumption(W/h)-not more than 145 Watts; Duty Cycle- 16 X 7; External control- RS232C, RJ45; Should have Customized Logo when no signal is active; Processor- Coretex A72 1.7GHz Quad-Core CPU; Viewing angle- 178 : 178; Power requirement - AC 100- 240 V, 50/60 Hz; Standby mode power not more than 0.5W; Bezel width maximum- 16 mm; Weight - not more than 20 kgs; VESA mount- yes; Should have Inbuilt signage player , IP5X rating , wifi and bluetooth, Auto\nsource switching & recovery etc; Safety required- CE, FCC, Energy Star 8.0, BIS\nBrand Options:- Samsung / Sony / Christie | | 3 | NOS |
|---|
| 57 | 56 | SITC of 65\" screen. Should have Brightness 350 nit or more; panel type VA; Operation- 16/7 hr; Minimum Resolution- 3840*2160 (4K UHD) Native contrast ratio- (4000:1). Color Gamut: 92%(DCI-\nP3, CIE 1976) Minimum Response time-8 ms; Display Colors- 1.07 billion or above; Minimum haze-2%; Speakers (inbuilt)- 10 w + 10 w or 20 w minimum; Storage (min)- 8 GB FDM; Inputs- DVI-D,HDMI 2.0 X 2,\nUSB 2.0 x 1 , Audio Input X 1; Output- Stereo Mini Jack Dynamic; C/R: MEGA; Maximum power consumption(W/h)-not more than 185 Watts; Duty Cycle- 16 X 7; External control- RS232C, RJ45; Should have Customized Logo when no signal is active; Processor- Coretex A72 1.7GHz Quad-Core CPU; Viewing angle- 178 : 178; Power\nrequirement - AC 100- 240 V, 50/60 Hz; Standby mode power not more than 0.5W; Bezel width maximum- 12 mm; Weight - not more than 28 kgs; VESA mount- yes; Should have Inbuilt signage player , IP5X rating , wifi and bluetooth, Auto\nsource switching & recovery etc. ;Safety required- CE, FCC, Energy Star 8.0, BIS\nBrand Options:- Samsung / Sony / Christie | | 4 | NOS |
|---|
| 58 | 57 | SITC of 32\" screen. Should have type Edge LED BLU; Resolution FHD (1920 x 1080);?Pixel Pitch (mm) 0.360(H) x0.360(V);?Active Display Area 698.4(H) x 392.85(V);? Brightness(Typ.) 400;?Contrast Ratio (Typ.) 5000:1;?Viewing Angle(H/V) 178/178; Response Time (G to G) 8ms(Typ.); Display Colors 16.7M(True Display), 1.07B(Ditherd 10bit); Color Gamut 72%; Operation Hour 24/7; Haze 2%; Speakers (inbuilt)- 10 w + 10 w or 20 w minimum; Storage (min)- 8 GB FDM; Inputs- DVI-D,HDMI 2.0 X 1,\nUSB 2.0 x 2 , Audio Input X 1; Output- Stereo Mini Jack Dynamic; C/R: MEGA; Maximum power consumption(W/h)-not more than 185 Watts; Duty Cycle- 16 X 7; External control- RS232C, RJ45; Should have Customized Logo when no signal is active; Processor- Coretex A72 1.7GHz Quad-Core CPU; Viewing angle- 178 : 178; Power\nrequirement - AC 100- 240 V, 50/60 Hz; Standby mode power not more than 0.5W; Bezel width maximum- 12 mm; Weight - not more than 28 kgs; VESA mount- yes; Should have Inbuilt signage player , IP5X rating , wifi and bluetooth, Auto\nsource switching & recovery etc. ;Safety required- CE, FCC, Energy Star 8.0, BIS\nBrand Options:- Samsung / Sony / Christie | | 1 | NOS |
|---|
