Upgradation Of Audio-Visual System , Stage Light With Video Conference Technology , Refurbishing Of Acoustics Work And Fire Detection And Protection System With Five Years Onsite Support And Comprehensive Maintenance At Rjm Auditorium , Iim Ahmedabad ., Indian Institute Of Management Ahmedabad-Gujarat

TDR : 25716202

Tender Notice
BOQ

Expired

Indian Institute Of Management Ahmedabad , Gujarat

Tender Brief : Upgradation Of Audio-Visual System , Stage Light With Video Conference Technology , Refurbishing Of Acoustics Work And Fire Detection And Protection System With Five Years Onsite Support And Comprehensive Maintenance At Rjm Auditorium , Iim Ahmedabad .

Document Fees
Refer document

EMD
₹ 800000.0 /-

Tender Value
Refer document

Submission Date
05-11-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: < Upgradation of audio-visual system, stage light with video conference technology, refurbishing of acoustics work and fire detection & protection system with five years onsite support and comprehensive maintenance at RJM Auditorium, IIM Ahmedabad >
1	1	Comprehensive Maintenance and Onsite Support on IIM Ahmedabad
2	1.01	2nd Year Comprehensive Maintenance and Onsite Support on IIM Ahmedabad	1	Per Year
3	1.02	3rd Year Comprehensive Maintenance and Onsite Support on IIM Ahmedabad	1	Per Year
4	1.03	4th Year Comprehensive Maintenance and Onsite Support on IIM Ahmedabad	1	Per Year
5	1.04	5th Year Comprehensive Maintenance and Onsite Support on IIM Ahmedabad	1	Per Year
6	100	SPECIFICATION FOR AUDIO EQUIPMENTS
7	101	Supply, Installation, Testing and Commissioning of Discussion Microphone surface-mounted condenser microphone designed primarily for mounting on conference tables, high sensitivity and wide frequency range specially for picking up speech, Programmable microphone button, LED indicator for status indication, Frequency Response 50–17000 Hz, Nominal Impedance 150O /200 O or batter , Sensitivity: 10mV or better, Maximum SPL: 117dB, Polar Pattern: Cardioid, Dynamic Range: 94dB(A) or better. Approved make: Shure / Sennheiser/Beyerdynamics	5	NOS
8	102	Supply, Installation, Testing and Commissioning of 17-18\" Gooseneck microphone: Pre-polarised condenser microphone with frequency response of 50Hz-17kHz; Max SPL 0f 123 dB SPL; Cardioid pickup pattern; Equivalent Output Noise: 29 dB SPL, Reject RF interference from ever-present smart phones, LED indicator, along with Base with ON-Off Switch. Approved make: Shure / Sennheiser/Beyerdynamics	4	NOS
9	103	Supply, Installation, Testing and Commissioning of Digital Wireless Handheld Microphone operating on 1.9 GHz/ 2.4 GHz, bandwidth, 18 compatible channels , RF output 80mW or more, pickup Pattern: cardioid, AES 256-bit encryption for secure transmission, AF Frequency response: 50 Hz-20 kHz, Dynamic range: > 99 dB(A), with front panel LCD/LED indication, 7-band Graphic equalizer, LAN port for control and Monitoring-It should be possible to monitor and change the setting for all the wireless microphone over the network. Approved make: Shure / Sennheiser/Beyerdynamics	4	NOS
10	104	Supply, Installation, Testing and Commissioning of Digital Wireless Lapel Microphone operating on 1.9 GHz/ 2.4 GHz, bandwidth, 18 compatible channels , RF output 80mW or more, pickup Pattern: omi-directional, AES 256-bit encryption for secure transmission, AF Frequency response: 50 Hz-20 kHz, Dynamic range: > 99 dB(A), with front panel LCD/LED indication, 7-band Graphic equalizer, LAN port for control and Monitoring-It should be possible to monitor and change the setting for all the wireless microphone over the network. Approved make: Shure / Sennheiser/Beyerdynamics	4	NOS
11	105	Supply, Installation, Testing and Commissioning of Digital Wireless headworn Microphone operating on 1.9 GHz/ 2.4 GHz, bandwidth, 18 compatible channels , RF output 80mW or more, pickup Pattern: omi-directional, AES 256-bit encryption for secure transmission, AF Frequency response: 50 Hz-20 kHz, Dynamic range: > 99 dB(A), with front panel LCD/LED indication, 7-band Graphic equalizer, LAN port for control and Monitoring-It should be possible to monitor and change the setting for all the wireless microphone over the network. Approved make: Shure / Sennheiser/Beyerdynamics	2	NOS
12	106	Supply, Installation, Testing and Commissioning of Dynamic Vocal Microphone with frequency response of 50Hz-15kHz; Cardioid pick-up pattern rejects off-axis sound and provides superior gain before feedback; Nominal impedance of 150?/350?; With ON/OFF switch. Approved make: Shure / Sennheiser/Beyerdynamics	4	NOS
13	107	Supply, Installation, Testing and Commissioning of Instrument microphone: For Drums and Bass instruments; Compact dynamic ( moving coil), cardioid/Supercardioid instrument micrphone with frequency response of 40Hz-10kHz; Nominal impedance of 150?/350?; Low sensitivity to impact and handling noise. Approved make: Shure / Sennheiser/Beyerdynamics	4	NOS
14	108	Supply, Installation, Testing and Commissioning of Revolabs Executive HD Wearable Wireless Microphone with clip having audio bandwidth 50 - 20000 Hz, 1 or 2 channels per system with 1 or 2 Proprietary 4 pin microphone charge jacks. Approved make: Revolabs	1	NOS
15	109	Supply, Installation, testing and commissioning of UHF Omni directional Antenna, Pick-up pattern : directional, Frequency range : 450 - 960 MHz, Antenna gain : 4 dBi, Apex angle: approx. 100°, Front-to-back ratio: = 14 dB etc complete as required. Approved make: Shure / Sennheiser/Beyerdynamics	2	NOS
16	110	Supply, Installation, testing and commissioning of antenna splitter for 4 receivers, RF frequency range : 500 - 2700 MHz etc complete as required. Approved make: Shure / Sennheiser/Beyerdynamics	2	SET
17	111	Supply, Installation, testing and Commissioning of Digital mixing console, 48 channel mixer, 24 mic line inputs, 12 analogue outs, 16 Flexi Aux / Sub-Group Busses, 4 Assignable Multiband Compressors, 8 Digital FX, 10 x Control Groups, 16 Assignable Graphic Equalizers, 96kHz Sample Rate, 2 Ethernet connections for Networking, 2 x multi-touch screens, 21 x touch sensitive moving faders, Integrated USB2 Audio I/O interface for recording and playback, A>D & D>A 24-bit Converter Bit Depth, Processing Delay 2ms Typical @ 48k, Frequency Response +/- 0.6dB (20Hz – 20kHz), THD <0.05% @ Unity Gain, 10dB Input @ 1kHz, Channel Separation:> 90dB along with stage box 32 input and 8 output, digital Cat5e connection. Approved make: Digico/ Allen Heath/ Mackie	1	NOS
18	112	Supply , Installation , testing and commissioning of Main Line Array FOH cluster loudspeaker Bi-amp/Tri-amp operation , loudspeaker consisting of Min 2 x 8\" LF driver or better and 2x 2\" HF compression driver or better with frequency response of 70Hz - 16 kHz (-3dB) ; nominal dispersion of 100 Degree Horizontal X 60 Degree Vertical (Note:- for matching vertical dispersion of 60°, required number of speakers array modules should be included in each set) ; with sensitivity of 102 db SPL (1W, 1 mtr) for each cluster ; Max SPL of 127 db SPL Peak . Construction birch plywood complete with standard accessories as per specifications. ( Minimum 3 array Modules or better). Approved make: Bose / L Acoustics / d&b audio Technik	2	NOS
19	113	Supply, Installation, Testing and Commissioning of Flying / Array Brackets for array cluster, Single point suspension, To provides desired tilt angle and toe-in for optimum positioning, Shall be from same OEM of FOH Speakers. As Approved by the consultant. Approved make: Custom	2	NOS
20	114	Supply , Installation , testing and commissioning of Line array Subwoofer Module with Minimum 2x 15\" / 1x18\"or better; Frequency response 35 Hz - 110 Hz or better; Sensitivity of 94 dB SPL (1W, 1 Mtr) ; Max SPL 124 dB SPL; Construction in birch plywood, complete with standard accessories as per specifications . Approved make: Bose / L Acoustics / d&b audiotechnik	2	NOS
21	115	Supply , Installation , testing and commissioning of front fill loudspeaker with frequency response of 80Hz-16kHz; Nominal dispersion of 90°H x 55°V; Long term power handling of 300W; Sensitivity (SPL/1W @ 1m) of 94dB SPL; Max SPL @ 1m of 119 dB; Nominal impedance of 8?. Approved make: Bose / L Acoustics / d&b audiotechnik	4	NOS
22	116	Supply, Installation, Testing and Commissioning of Active Monitor Speakers 6\"/7\", frequency range 80 Hz - 17 kHz or better, Max (RMS) Output Power : 150 Watt ( 80W x2), Bi amplification, with XLR, TRS, and RCA inputs, for Control room and Production room, Nominal Voltage: AC 120/230 V, Power Consumption, Power Source: AC power adapter. As Approved by the consultant. Approved make: Bose / L Acoustics / d&b audiotechnik	4	NOS
23	117	Supply , Installation , testing and commissioning of Surround loudspeaker with frequency response of 80Hz-16kHz; Nominal dispersion of 90°H x 60°V; Long term power handling of 300W; Sensitivity (SPL/1W @ 1m) of 94dB SPL; Max SPL @ 1m of 119 dB; Nominal impedance of 8?. Approved make: Bose / L Acoustics / d&b audiotechnik	12	NOS
24	118	Supply , Installation , testing and commissioning of Wall Mount Loudspeaker for Control room and green room having 16 Watt Power Handing with 170°H x 160°V Coverage having 1 x 2.25\" full range driver. Approved make: Bose / L Acoustics / d&b audiotechnik	2	NOS
25	119	Supply, installation, testing & Commissioning of Digital Signal Processor: AEC capable Audio DSP with at least 12 inputs and 8 outputs, Dante Audio Network, POTS, VOIP and USB audio ineterfacel; 5 in/out GPIO; A/D and D/A Converters : 24 bit; THD+N : 0.002 % or better; Dynamic Range : >114dB. Approved make: Bose / Biamp / Symetrix	2	NOS
26	120	Supply, Installation, Testing and Commissioning of 8/4 Channels Digital Power Amplifier for MAin FOH Speakers, Subwoofer, Surround Speakers, front Fills and green room speaker, with internal DSP, Class D, 500W per channel, bridged Mode: 1000W @ 8 ohm and 70/100v, Voltage Gain: 32 dB, S/N ratio >95 dB, 70/100 Volt compatible, Along with one spare Amplifier as approved by consultant. Approved make: Bose / L Acoustics / d&b audiotechnik	1	SET
27	121	Supply, Installation, Testing and commissioning of Loudspeaker & subwoofer for lobby area :Flexible Array Loudspeaker with 8 x 2.25” mid-high drivers; 1 x 12” LF driver ; System Type : Self powered, two-way ; Frequency response (-3 dB): 52 Hz - 15.5 kHz ; Nominal dispersion: 100° H x 40° V ; Maximum SPL @ 1 m: 126 dB SPL (132 dB SPL peak) ; Rated power: 1000 W.\nSubwoofer : Subwoofer with 2 x 10\" high-excursion drivers; System Type: Self powered ; Frequency response (-3 dB): 40 Hz - 250 Hz ; Nominal dispersion: omnidirectional ; Maximum SPL @ 1 m: 130 dB SPL ; Rated power: 1000 W. Approved make: Bose / L Acoustics / d&b audiotechnik	2	NOS
28	122	Supply, Installation, testing and Commissioning of Microphone Cable core 19 x 40 guage. Approved make: Sommer/Belden/Klotz/Canare	1500	MTRS
29	123	Supply, Installation, Testing and Commissioning of Speaker Cable 2.5 Sq.mm 2 Core twin Twisted cable with tin copper PVC Sheathed or better. Approved make: Sommer/Belden/Klotz/Canare	1200	MTRS
30	124	Supply, Installation, Testing and Commissioning of AV Preamplifier : Surround Preamplifier having 6-HDMI inputs and 1 output, Direct play for portable audio devices, USB memory device via USB, Tone control, Supports WMA, MP3, WAV, MPEG-4 AAC, FLAC, JPEG file, Bright VFD display, HP output, RS-232c serial / IP controllable. Approved make: Dolby SR/ Denon	1	NOS
31	125	Supply, Installation, testing and Commissioning of Connectors and accessories as per requirement. Approved make: MX/Neutrik/Amphino	1	SET
32	126	Supply, Installation, testing and Commissioning of Patch Cord for Stage Area XLR - XLR. Approved make: Audiotech / Belden /Draka	18	NOS
33	127	Supply, Installation, Testing and Commissioning of 32U Floor Standing Rack ( 600 x 600) , Vertical Cable Duct, 6A 10 Socket PDU, 2 nos. Cooling Fan, Front 4 mm thick Toughened Glass Door, Rear Door Square Mesh Ventilation, Both with Lock, Hardware Screw . Approved make: Custom	2	NOS
34	200	SPECIFICATION FOR VISUAL EQUIPMENTS
35	201	Supply, Installation, testing and Commissioning of 1DLP laser phosphor projector with Brightness: 13,500 lumens, Resolution: 1920 x 1200 (WUXGA), Aspect ratio: 16:10, contrast Ratio: 500,000:1 Inputs: HDMI x 2, 3GSDI x 1, DVI-D x 1, HD15 x 1, USB, HDBaseT, RJ45 x 1; Signal Output: 3GSDI x 1, DVI-D x 1 with including standard lens, Motorized horizontal and vertical lens offset (memory available), Along with short throw Zoom lens 0.84-1.02:1. Approved make: Christie / Dukane/ DPI	1	NOS
36	202	Supply, installation, testing and commissioning of Cyclorama Screen 5.4m x 9.8m matt white. Approved make: Customised	1	NOS
37	203	Supply, Installation, testing and Commissioning of Wireless and wired Presentation & collaboration gateway System, Auto-switching between the Wired or Wireless Content to Main display, Supports 1X HDMI input and 1 X HDMI Output, Supports 1080p Resolution, Frame Rate: 60FPS, Customizable welcome screen provides clear instructions for presenters, HDCP 1.4, EDID compliant, Should provide Powerful security features like user authentication & 1024–bit encryption. Approved make: Crestron/Kramer/Extron	1	NOS
38	204	Supply, Installation, Testing and Commissioning of 55\" display, Resolution: 3840*2160 (4K UHD), Brightness: 350 nit, Contrast Ratio: 4000:1, Viewing Angle: 178/178, Response Time: 8 ms, Operation Hour: 16/7, input: HDMI 2.0 (2), DVI-D, HDCP compliant, External Control: RS232, RJ45. Approved make: Panasonic/Christie/ Samsung	1	NOS
39	205	Supply, Installation, Testing and Commissioning of Side Monitors 85\" LCD Display Panel, with 4K Resolution : 3840 x 2160, 500 nits (cd/m2) Brightness, contrast ratio : 3000:1, Viewing Angle : 178° h/v, response time : 8ms, Inputs : HDMI x 2, DVI-D, DisplayPort, Audio, RS-232 Control, 100-240 VAC @ 50/60Hz Power Supply, 24x7 Operation. Approved make: Panasonic/Christie/ Samsung	2	NOS
40	206	Supply, Installation, Testing and Commissioning of HD Pan/Tilt/Zoom (PTZ) Camera has USB 3.0 and HDMI video output interface. It shell have a 1/2.8 inch image sensor with Full HD 1080p output resolution and a high dynamic image of 60 fps.Camera shell be 12x optical zoom lens, white balance, exposure mode should delivers a clear image even in low light or the extreme contrast of brightness and darkness in a conference / Auditorium room. camera shell covers a wide shooting angle of Horizontal viewing angle: 72° and achieves high-speed, Pan angle from -100° to +100°; tilting angle from -30° to +30°, quiet, and precise positioning with smooth PTZ operations. There are up to 128 present setting movements and stable remote controlling for displaying effective and efficient presentations. USB 3.0 Plug & Play and compatible with Windows, Linux, MAC OSX, Chrome OS, Free Control Software for controlling the cameras without a joy stick controller, Focal Length should be f = 3.92 ~ 47.32 mm, with wall mount bracket. Approved make: lumens / Panasonic / sony	1	NOS
41	207	Supply, Installation, Testing and Commissioning of Lecture Capture Device with recording, streaming and switching feature, Capture from Multiple Sources and able to record and Stream up-to min three full motion HD Videos simultaneously in one frame up-to 1080p resolution. Multiple encoding rates, Multiple frame rates, Auto Logo Insertion during recording Streaming Options: Webcast, Unicast and Multicast\nAudio Only Encoding Formats: AAC Video Inputs: HDMI/VGA/RJ-45\nInput Channel : HDMI / VGA/ IP for Laptop, Visualizer and Cameras with 4 channel synchronized recording\nAudio Input: Line In, Mic and 3.5 mm Stereo\nVideo Processing: At different frame rates up-to 30 fps; Multiple Bit Rate from 64kps to 24Mbps in Full HD Resolution of 1080p\nOutput Channel: HDMI/VGA\nStorage: In-built Storage of min 1 TB Stored File Format: AVI / MPEG4\nRemote Storage: FTP protocol\nStreaming formats : RTP and RTMP\nDisplay Output: Full Screen, Picture in Picture, Multi-channel split screen.\nLecture Editing: Through Web-based back stage and Post\nLecture Index Editing\nOperation Control: Through Remote Control and web based control interface\nExternal Control: RS-232 Interface Port\nApproved make: lumens / media point / sony	1	NOS
42	208	Supply, Installation, Testing and Commissioning of Camera Controller Joystick for Pan/Tilt/Zoom and focusing, Easy operation of versatile camera adjustments, RS-232/RS-422 communication interfaces allow long-distance communication, High brightness OLED display, Multi-level protection from illegal operation and settings, Auto backlight keys, Comm. Interface Mini Din 8PIN, Protocol VISCA, Baud Rate 9600/38400 bps, Joystick 4-axis(Pan/Tilt/Zoom/Focus). Approved make: lumens / Panasonic / sony	1	NOS
43	209	Supply, Installation, Testing and Commissioning of Visualizer / Document Camera with 20x zoom, Full HD 1080p Output Resolution, High Speed 30fps Dynamic Image, VGA Output/HDMI Output, Built-in Microphone, One-Touch synchronous audio/ video recording, Compatible with USB flash drives, expandable to 4TB. Approved make: Vaddio/Wolfvision/Lumens	1	NOS
44	210	Supply, Installation, Testing and Commissioning of Custom Digital Podium with with feasibility to place Interactive 21\" or higher Tablet Monitor with Monitor Electronic lift, 7 inches touch panel, Podium Microphone, Lapel Microphone, Handheld Microphone, Central Controller, Presentation Plate, document camera, Switcher, Amplifier, PC, etc complete with standard accessories. Approved make: Custom	2	NOS
45	211	Supply, Installation, testing and commissioning of Video over IP Encoder with 1x HDMI Input, 1x RJ45 Lan port Output, 1x USB , Balanced Analog Audio I/O & Control (RS232 & IR) supporting transmission of 4K60 4:2:0 or better. It should have 1000 Mbps, control Ethernet/LAN port. HDCP 2.2 Compliant. Built in scaling on decoder output, Video Encoding/Decoding Compression Standard: MJPEG, Audio Encoding/Decoding Compression Standard: AAC-LC, shall Support 5.1, 7.1 Channel, Dolby Digital 5.1 Channel. Approved make: Crestron/Kramer/Extron	7	NOS
46	212	Supply, Installation, testing and commissioning of Video over IP decoder with 1x RJ45 Lan port Input, 1xHDMI port Output and vice versa, 1x USB , Balanced Analog Audio I/O & Control (RS232 & IR) supporting transmission of 4K60 4:2:0 or better. It should have 1000 Mbps, control Ethernet/LAN port. HDCP 2.2 Compliant. Built in scaling on decoder output, Video Encoding/Decoding Compression Standard: MJPEG, Audio Encoding/Decoding Compression Standard: AAC-LC, shall Support 5.1, 7.1 Channel, Dolby Digital 5.1 Channel. Approved make: Crestron/Kramer/Extron	9	NOS
47	213	Supply, Installation, testing and commissioning of Video over IP Encoder with 1x HDMI Input, 1xVGA 1x RJ45 Lan port Output, 1x USB , Balanced Analog Audio I/O & Control (RS232 & IR) supporting transmission of 4K60 4:2:0 or better. It should have 1000 Mbps, control Ethernet/LAN port. HDCP 2.2 Compliant. Built in scaling on decoder output, Video Encoding/Decoding Compression Standard: MJPEG, Audio Encoding/Decoding Compression Standard: AAC-LC, shall Support 5.1, 7.1 Channel, Dolby Digital 5.1 Channel. Approved make: Crestron/Kramer/Extron	2	NOS
48	214	a) Supply, Installation, Testing and Commissioning of Video Conference System consisting of Full HD 1080p camera with 10X Optical Zoom, PAN +/- 100°,TILT +/-20°, Full HD 1080p Codec with 1 HD input for camera, 1 HDMI & 1 VGA input for Content, Microphone, Cables, and Wireless Remote Control, All necessary Cables, as required. The system should support H.323 and SIP with support for Video Compression Standards – H.261, H.263, H.264, H.264 SVC, H.264 High Profile/H.265 & audio Compression Standards – G.711, G.722,G.722.1 or equivalent. It should support content sharing via H.239 and BFCP.\nb) The system should have capability to connect to 5 more locations all with Full HD resolution (1+5) by addition of a software license in future. \nc) It should be capable of enhancing video conferencing experience (by adding additional hardware/software in future) with advanced speaker-tracking technology such that it automatically scans the room and seamlessly commands the main camera to appropriately frame the speaker during a call without any manual intervention. The speaker tracking camera should be from the same OEM as the Codec & must have a range of minimum 30 feet & above.\nd) The system should support 1080p30fps content along with 1080p30fps Main Video & It should support 4 nos of Omni Directional Microphones either directly or through array. One Mic should be supplied day one.”\ne) The system must support Integration with Microsoft Lync 2013, Skype for Business On Premise & Online through software license in future & without the need of additional gateway or hardware. \nApproved make: Polycom/Cisco	1	NOS
49	215	THIS ITEM IS AN OPTIONAL ITEM OF SR. NO.214. Which means either Items Sr. 214 or Sr.215 (215.01 to 215.15) will be executed.
50	215.01	HDMI and audio to USB scaling bridge HDMI and Audio to USB Scaling Bridge Video scaling provides USB output from 320x180 to 1080p/15 to match common software codec requirements, Integrated audio DSP AEC reference output. Connects to Windows® or Mac®-based computers with USB plug-and-play . using industry standard UVC - USB Video Class and UAC - USB Audio Class drivers. Supports popular software communications platforms including Microsoft® Skype®/Skype® for Business, Cisco® WebEx®, Adobe® Connect™, and Zoom. Inputs: One HDMI with buffered loop-through, one stereo balanced/unbalanced audio input on captive screw, one mic or line balanced/unbalanced audio input on captive screw, one USB 2.0 for four-channel audio input – stereo playback and stereo communications. Outputs: One USB 2.0 for streaming video and two-channel audio output, one stereo balanced/unbalanced audio output on captive screw, balanced/unbalanced mono AEC reference and auxiliary audio mono outputs on captive screw.HDCP-compliant HDMI input and loopthrough.HDMI audio de-embedding. Approved make: Extron/ QSC/ Polycom	1	NOS
51	215.02	4 input HDMI Switchers ( for camear 1- Camera-2 ), Shall provide four (4) female HDMI Type A connectors for digital video signals with embedded audio, Shall provide switching of digital video and embedded digital audio signals that shall support four inputs and one output, Shall be a switcher for HDMI video and embedded digital audio signals, Shall support computer and video resolutions up to 4096x2160 at 30 Hz at 4:4:4 chroma sampling, Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio, User-selection of EDID from the connected display, User-selection of EDID from pre-stored data files, Electronically accessible over RS-232 or USB connection, Shall provide automatic switching that follows the most recently connected or highest-numbered input with an active connected source, Maintain continuous EDID communication with the connected sources. Approved make: Extron/ Lightware/ Kramer	1	NOS
52	215.03	6 button panel 1 volume control: Manage, monitor, and control AV devices using a standard Ethernet network, Device shall have a total of six dual color LED backlit buttons, four dedicated for input selection and the remaining two dedicated for power., Buttons shall illuminate white or red, depending on function, for ease of use, Provide two configurable RS-232 ports on captive screw connectors located on the back of the controller that can be configured for unidirectional or bidirectional control of AV system components., , Provide one digital input on captive screw connector located on the back of the controller that can be used to interface with devices such as sensors, switches. Device shall have the following memory available, at minimum, SDRAM: 512 MB, Flash: 512 MB, Supports a web-based AV resource management application that provides a means to manage, monitor, and control AV equipment. Provide an internal real-time clock with backup battery that is used to keep track of the date and time., Device shall be controllable using an iPad that is running an iPad App as a secondary point of control., Device shall have the ability to be mounted directly in a wall, lectern, or other flat surface and shall be able to be secured using the supplied mud ring and hardware., Provide two configurable RS-232 ports on captive screw connectors located on the back of the controller that can be configured for unidirectional or bidirectional control of AV system components., Provide two configurable low voltage relays on captive screw connectors located on the back of the controller that can be configured to control lighting, screen control or other device functions. Device shall support the following protocols: ICMP (ping), IP, TCP, UDP, DHCP, DNS, HTTP, HTTPS, NTP, SFTP, SMTP, SNMP, SSH. should be natively able to control soft device mentioned bove. Approved make: Extron/ Lightware/ \nKramer	1	NOS
53	215.04	Array Microphone (corridor) parrern type: Transducer type: Condenser, Frequency response: 130 - 17,000 Hz, Microphone, Nominal impedance: 200 O, size appx 280 to 300 mm, Max. SPL at f = 1 kHz, k< 1%: 112 dB, Signal-to-noise ratio rel. to 1 Pa:60 dB. Approved make: Beyerdynamic/ Senneisser/AKG	1	NOS
54	215.05	PTZ camera with a powerful 30X optical zoom and a secondary 120° FOV panoramic camera,Integrates auto tracking, Multi-Presenter Detection, and streaming with a superior dual lens tracking design.Pan Rotation: -175° (left) +175° (right), Tilt Rotation: -30° (down) +90° (up), Pan Control Speed: 2° - 50°/sec, Image Sensor: 1/2.8\" 60fps low lux CMOS sensor, Lens Focal Length: 2.12 mm, White Balance: auto, Exposure: auto, Digital Zoom: 12X minimum, FOV: minimum 75 Degree or better, for PTZ, panaromic vidw: FOV 120 degree or better. Approved make: Aver/Lumens/ Vaddio	2	NOS
55	215.06	Height Adjustable ( manual) Cart for Large screen with Cabinet, Vertical Height Adjustment: for proper positioning, Cable Management: elegantly hides any cables that are attached to displays, Sturdy steel base, Powder Coating, with caster base, weight capacity load 100 kg,Camera Rack Weight Capacity: 5-6 kg, tilt range 10 degree range. Approved make: Custom	1	NOS
56	215.07	Interactive Professional display with a size of 85\" or 86\" ; which should have resolution of 3840 x 2160 with an aspect ratio of 16:9, Brightness should be 400 nits (cd/m2) or more , Contrast ratio should be 1100:1 or better; refresh rate should be 60Hz or better , Response time should be 8ms or better, Color space should be 72% minimum or better, Display colors should be 10 bit, 1.07 billion colors or better, Video inputs should be 2 x HDMI (Ver 2.0, HDCP 2.2), DisplayPort (Ver 1.2a*, HDCP 1.3), VGA, YPbPr, 1 x USB 2.0, USB 3.0, 1 internal usb 2.0, OPS; Video outputs should be DisplayPort 1.2a x 1, HDMI 2.0 x 1; Audio inputs should be RCA (L/R) line in, Audio outputs should be RCA (L/R) line out, 3.5mm headphone jack SPDIF coax, Should have control in outs like RS-232 (D-Sub9), LAN (RJ45), IR wire extender, should have other features like Commercial-grade LCD with LED backlight, OPS slot, Anti-glare treatment, 2 x 8W speakers, On/off scheduler, USB playback of Photo/Video/MP3, HDMI-CEC Source switching for failover, Kensington lock2, Wi-Fi®2, Bluetooth2, Miracast device connectivity, Pixel shifting; should have touch interactive features like detection method: Infrared rays, capability: Integrated touch included, supported touch points: 10 maximum (simultaneous over 90% area), object size recognized: single touch 5mm minimum, multi drawing 5mm minimum, touch response rate: Typ 3-10 ms, supports the following OS: Windows®7/8/10, Mac®OS3, power not more than 280 watt typical and maximum 360 w. Approved make: Christie/Samsung/Barco	1	NOS
57	215.08	Ultra-portable, Multi-Position PA system: Rechargeable lithium-ion battery allows you to perform anywhere for up to 10 hours+ Onboard 3-channel mixer, reverb and EQ controls on 2 channels, with a dedicated channel for either wired (3.5 mm) or wireless source, Dimension and weight: less than 35 cm H x 25 W x 30 cm less than 8 kg. Approved make: Bose / L Acoustics / d&b audio Technik/	1	NOS
58	215.09	Fold-Type TV Mount. Approved make: Aver or equivalent	1	NOS
59	215.1	D-Type Mount; on tripod stand. Approved make: simplex or equivalent	1	NOS
60	215.11	Active Optical High-Speed Pluggable HDMI Cable - Plenum Rated - min 95ft cable. Approved make: Crestron/Kramer/Extron	1	NOS
61	215.12	Ultra–Slim Flexible High–Speed HDMI Cable with Ethernet- 10ft cable. Approved make: Crestron/Kramer/Extron	3	NOS
62	215.13	USB 2.0 A (M) to B (M) Cable- 15 ft cable. Approved make: Crestron/Kramer/Extron	1	NOS
63	215.14	Microphone Cable, it should have high-quality dual shielded pair cable, Should support balanced stereo mic or line level audio signals, Should have Conductors and drain wire are stranded 20AWG tinned copper, Should have rugged and flexible jacket with sequential markings every meter. Approved make: Crestron/Kramer/Extron	30	MTRS
64	215.15	Control Cable (1Mtr), It should have high-quality shielded pair cable, Should support balanced mono or unbalanced stereo mic or line level audio signals, Should have Conductors and drain wire are stranded 20AWG tinned copper, Should have rugged and flexible jacket with sequential markings every meter. Approved make: Crestron/Kramer/Extron	30	MTRS
65	216	Supply, Installation, Testing and Commissioning of Presentation Point with 1 x VGA, 1 x HDMI, 1 x Audio and 1 x Power Socket with LAN port. Approved make: Crestron/Kramer/Extron	2	NOS
66	217	Supply, Installation, Testing and Commissioning of 12/8 Button Control panel for control of Projector, Screen, Cameras, lighting etc. complete with gang box. Approved make: Crestron/Kramer/Extron	1	NOS
67	218	Supply, Installation, Testing and Commissioning of 7\" POE wired touch Panel with advanced 10 multi–touch points and 2–finger gesture capabilities for AV Control, Resolution: 1280 x 800 pixels, Brightness: 400 nits (cd/m²), Contrast: 800:1. Should supply with with table and wall mounts units. Approved make: Crestron/Kramer/Extron	1	NOS
68	219	Supply, Installation, Testing and Commissioning of 9\" apple I Pad for AV Control. Approved make: Apple	1	NOS
69	220	Supply, Installation, Testing and Commissioning of AV controller with 4x RS232 port with modules acceptable, 4x IR/Serial port, 1x Ethernet control port, 4x relay port, 4x Digital I/O port or better, Should support POE, Memory: SD RAM: 512 MB, Flash: 4GB or better as per specifications as required. Approved make: Crestron/Kramer/Extron	1	NOS
70	221	Supply, Installation, Testing and Commissioning of Network Based switch 24 Port 10/100/1000 gigabit managed POE Switch, QOS Support, IPV4/IPV6 Support, Advance Security Management, Switching Capacity in Gigabits per Second: 12.8Gbps, Non-blocking ports and Internet Group Management Protocol: IGMP V2/V3, Mac, windows, Linux Compatible. Approved make: Netgear/ Dlink/ Cisco	1	NOS
71	222	Wall Plate with 1x HDMI out, along with HDMI to 3G HD–SDI Convertor, data rate Up to 3Gbps. Approved make: Crestron/Kramer/Extron	1	NOS
72	223	Supply, Installation, Testing and Commissioning of HDMI Cable - 2 mtr. Approved make: Crestron/Kramer/Extron	3	NOS
73	224	Supply, Installation, Testing and Commissioning of HDMI Cable - 1 mtr. Approved make: Crestron/Kramer/Extron	14	NOS
74	225	Supply, Installation, Testing and Commissioning of UTP shielded twisted pair CAT 6A Cable. Approved make: D link/ Digilink/ Kramer	500	MTRS
75	300	SPECIFICATION FOR LIGHTS
76	301	SITC of STAGE CURTAIN: Providing and Fixing of Stage MAIN curtain made of crushed/ velvetor as approved curtain cloth with horizontal sliding arrangement complete with aluminium Curtain Track, Ceiling or wall mount brackets, sliding arrangement & motorised operation complete with runners and master runners, Rf remote with 3 nos push buttons for forward, reverse and stop positions. It should be draped to half area when in closed position with minimum overlap at centre to be 900mm and stitched in double gathering, the motorized curtain mechanism is operated with 2 nos. of Curtain track motors; one at each end/ track; with inbuilt limit switch system, torque limiter to protect against unwanted interruption and soft start system etc as complete required. approx. size 15.5 mtrs x 7 mtrs . Approved make: Customized ( Make for fabric: Reymond / Reliance, Make for Motor: Crompton and equivalent,	1	NOS
77	302	SITC of Providing and Fixing of Rear curtain in glazed cotton curtain cloth with horizontal sliding arrangement complete with Aluminium Certain Track, Ceiling or wall mount brackets, sliding arrangement & motorised operation complete with runners and master runners, Rf remote with 3 nos push buttons for forward, reverse and stop positions. It should be draped to half area when in closed position with minimum overlap at centre to be 900mm and stitched in double gathering, the motorized curtain mechanism is operated with 2 nos. of Curtain track motors; one at each end/ track; with inbuilt limit switch system, torque limiter to protect against unwanted interruption and soft start system etc as complete required. Approved make: Customized ( Make for fabric: Reymond / Reliance, Make for Motor: Crompton and equivalent,	1	NOS
78	303	SITC of Providing and fixing of stage cloth wings made out of black glazed cotton cloth fixed on 32mm dia Pivoted bar and stretched with bottom weight along with fixing accessories etc. complete as required. Approved make: Customized ( Make for fabric: Reymond / Reliance, Make for Motor: Crompton and equivalent,	6	NOS
79	304	SITC of Providing and fixing of light bar and stage frills made out of double gathering glazed cotton cloth to be installed above the stage on 28mm dia GI pipe or GI channel along with all fixing accessories etc as complete required. Approved make: Customized ( Make for fabric: Reymond / Reliance, Make for Motor: Crompton and equivalent,	4	NOS
80	305	SITC of Providing and fixing stage MS suspension Grid structure above acting area of stage at 1200x1200 mm centres, using 50mm dia Gi Pipe, the grid so formed to be suspended from bottom of roof structure by means of 50 x 5mm thick, MS flat suspenders, fixed with MS cleats & dash fasteners at RCC slab & nuts & bolts at 1200 mm centres to the grid. Painting MS suspension grid & suspenders with 2 coats of red oxide primer and 2 or more coats of enamel paint of approved shade etc as complete required. Approved make: Custom	120	SQM
81	306	Supply, installation, Testing and commissioning of Pro Ellipsoidal with a 120W LED Profile Light ,Color Temperature 3200k, CRI 98, 12º - 30º ,5 Dimmer Modes, Manually adjustable Beam angle,3 and 5 Pin DMX Connections,3 DMX Channel Modes with Master Slave & Manual adjustment. Approved make: ETC / Clay Paky / ADJ /Canara lighting	10	NOS
82	307	Supply, installation, Testing and commissioning of 130W LED Engine with an 8-inch Fresnel lens, Color Temperature: 3000K,CRI 95,Manual Zoom control: 8-50 degree, 4-button LCD menu, Dimming 0-100%,manual and DMX control Option mode through 5pin / 3pin xlr,Robust extruded aluminium case, Includes barn doors. Approved make: ETC / Clay Paky / ADJ /Canara lighting	14	NOS
83	308	Supply, installation, Testing and commissioning of 18 x 3W Ultra bright 3-in-1, TRI Color RGB LEDs provides optimal color mixing with no RGB shadows,4 operation modes (DMX-512, Master/Slave, Stand Alone and Sound Active),7 DMX work modes, Refresh Rate: 410Hz, Beam angle: 40 degrees, On-board, 4-button LED DMX display/menu, Includes mounting brackets and Optional infrared remote to control. Approved make: ETC / Clay Paky / ADJ /Canara lighting	6	NOS
84	309	Supply, installation, Testing and commissioning of 100W High Quality LED Parcan Light complete with COB Lamp source 3000K Colour temperature, CRI 90, DmX 512 dimming with 2 channel control,DMX: 5-pin DMX In/Out, Beam Angle of 9 to 30 Degree, LUX: 7135 (9°); 4440 (15°); 2236 (20°); 1266 (25°); 812 (30°),4-button DMX menu display. Approved make: ETC / Clay Paky / ADJ /Canara lighting	18	NOS
85	310	Supply, installation, Testing and commissioning of 18x 12-Watt(RGBAW + UV) LED Par Light,63 built-iin Color Macros,5 Operational Modes: Manual Color; Color Fade; Auto Program; Sound Active, and DMX modes,4 DMX Channel Modes,LED Life Expectancy: 50,000 Hrs,Refresh Rate: 3.6KHz,Metal Black Housing ,IP 30. Approved make: ETC / Clay Paky / ADJ /Canara lighting	8	NOS
86	311	Supply, installation, Testing and commissioning of 60W LED Follow Spot Light with 8 Colors (White, Red, Blue, Green, Orange, Yellow, 3200K (Warm White) & UV,18º - 26º Beam angle, 3 and 5 Pin DMX,Manual focusing, Manual Iris, Manual Framing Shutter, Hanging Bracket, Gel Frame Holder, Gobo Holder. Approved make: ETC / Clay Paky / ADJ /Canara lighting	1	NOS
87	312	Supply, installation, Testing and commissioning of DmX Controller, 7\" integrated multi-touch display, 4 configurable sliders, 40 Faders to control at least 80 channels with master control fader, Intuitive colour control of LEDs, Scene saving option, Smooth movement faders, Easy access key pads, Non intensity parameter control, with Optional chase & multifunction keys. Approved make: ETC / Clay Paky / ADJ /Canara lighting	1	NOS
88	313	Supply, installation, Testing and commissioning of 6-Way DMX Splitter & amplifier with 1x DMX In, 6x DMX Out & 1 DMX Thru (all 3-pin XLR’s),Link with other D6 Branch Splitters, Includes two straps to securely attach to truss, Clamp mount bracket included, On/Off power switch. Approved make: ETC / Clay Paky / ADJ /Canara lighting	1	NOS
89	314	Supply, installation, testing and commissioning of Light Point Wiring from dimmer / existing DB to be provided near stage to various stage light fixtures with 2.5 Sq.mm 3 Core PVC Insulated and PVC Sheathed Cable including Cable Tray of suitable size for laying these wires on the tray including 20 amps metallic clad sockets for Halogen Points & 15 Amp 3 Pin Socket for LED Points with box & plug top etc. as required. ISI Mark. Approved make: Customised	56	NOS
90	315	Supply, installation, testing and commissioning of DMX Wiring Points including looping point with DMX wire from Splitter to fixtures / fixture to fixtures complete with 3 / 5 pin XLR connector with box (wherever required).\" Approved make: Customised	56	NOS
91	316	Supply, Installation, Testing & Commissioning of MS sheet metal fabricated power cable termination Auxiliary marshalling box duly powder coated in black matt texture finish (total circuit termination complete with connectors, glands and mounting brackets (Total 9 AMB's) etc. all complete as per satisfaction of Engineer in charge. Approved make: Customised	1	NOS
92	317	Supply, Installation, Testing & Commissioning of Well designed and engineered rack mount type power distribution centre panel with necessary metering, outgoing feeders and 250 amps incomer and emergency trip arrangement And 30 way MCB Panel rack mount internally wired to control individual light points. etc. all complete as per satisfaction of Engineer in charge. Approved make: Customised	1	NOS
93	318	Supply, Installation, Testing & Commissioning of 40U\" Din rack for mounting PDCP and MCBP module and EDP etc. all complete as per satisfaction of Engineer in charge. Approved make: Customised	1	NOS
94	319	Supply, Installation, Testing & Commissioning of MS Fabricated duly powder coated power junction box (PJB) for connecting motors. etc. all complete as per satisfaction of Engineer in charge. Approved make: Customised	6	NOS
95	320	Supply, installation, Testing and commissioning of 5 Core DmX Cable with Sheathed housing on the cable, well designed insulation, low noise suitable to transmit DmX signal. Approved make: Belden/Crestron/Kramer/AMX/Klotz/krystal	150	MTRS
96	400	SPECIFICATION FOR STAGE FLOORING
97	401	Wooden Stage Flooring: Providing and fixing of 95x20 mm second class Teak wood kiln seasoned planks with tongue & groove joints. Teak wood planks to be of minimum length 750mm. The Teak wood planks to be fixed over two staggered layers of 12 mm thick MR grade ply of approved make fixed to Sal wood frame work of 50 x50 mm and 50x50 mm at 600 mm centre to centre (HxV). The Sal wood shall be kiln seasoned and chemically treated. The framework to be jointed with mathani cut method. The framework to be supported on 75 x 75x 8mm neoprene pads . The framework to be filled with 50 mm thick thermal bonded polyester wadding mikron fibber of 1000 gm/sqm mikron fibber. The stage floor to be PU polished with use of orbital sanders to make floor even before polishing. Approved make: Custom	90	SQM
98	500	SPECIFICATION FOR CARPET
99	501	Carpet Flooring: Providing & Fixing in position, Carpet > 1000 GSM, of approved make, chromojet printed synthetic cut-pile, carpet made with100% stain, proof fibres of approved make along with 6mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects. Specification No: As directed by consultant / engineer in charge. Make: Birla Transasia, CCE, Heritage. Approved make: Birla Transasia, CCE, Heritage	514	SQM
100	600	SPECIFICATION FOR FURNITURE
101	601	Supply & Installation of Furniture in 3 mtr x 1.4 mtr close area for A.V. Operation Kiosk with 3 side 5' partition, 3' x 5' door, 1 side 12mm toughened glass including equipment table of 0.45x2.40 mtr with 3 lockable drawer constructed with 18 mm water proof plywood, table top finished with white colour 1.0m laminate sheet. All border with moulded wooden putty (glass should be fixed with wooden beadings). 19\" horizontal custom design equipment rack as per confirmation by AV consultant. Approved make & design: Custom design on site	1	JOB
102	700	SPECIFICATION FOR ACOUSTIC
103	701	Stretch Fabric full System with 20mm tile for Auditorium Ceiling\nSupplying and fixing of Stretch Fabric System on G.I studs 2400mm X 50mm web, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing 50mm thick insulation. 600x1200x20mm tile with NRC 1.00 to be mechanically fastened on the G.I Studs. Acoustical infill of absorbwool 10mm which is adhered to the acoustical panel on the front side. Then 12mm/20mm Vinyl tracks are screw fixed on to the 6mm Ply and Acoustics panels. Then the fabric is stretched over the Vinyl tracks. The installed system should provide NRC OF 1.00.Fabric colour as per Consultant/Client choice. To be installed on G.I studs 600x600mm centre to centre 2400mm X 50mm web thickness 0.5mm, ranges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing of 50mm thick,1000 GSM absorb wool tested as per Fire Retardant ASTMD 635-1991/Insulation and IS 15061-2002 for excellent results. Approved make: Himalayan Acoustics, HeeraDesign, Armstrong. Approved make: Himalayan Acoustics, HeeraDesign, Armstrong.	746	SQM
104	702	Tile 595x595 mm 15mm NRC 0.85 With absorb wool,T-24 for stage ceiling insulation\nSupplying and fixing 15 mm tiles made of Wood Fibre 1mm width cement composites covered with Acoustically Transparent Absorptive microbres on the front side with an option of colours as per the choice of the Consultant/Client choice size 595 X 595mm Highly recommend for ceilings, has excellent noise absorption of 0.85 NRC as per ISO 354/ASTM 423C, meets stringent Fire Ratings ASTM D- 876, and BS:476 weather resistance as per IS 3308, Thermal Insulation as per IS:3346-1980 with relative humidity of 90% RH at 60o Celsius(140o Fahrenheit) for 15 days= No deterioration. Can be installed on T24 grid system of 0.6mm thick ,Main ‘T’ length minimum 3000mm, web minimum 35mm to be placed at 600mm centre to centre and secondary cross ‘T’ of length 600mm, web minimum 35 mm, inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise, Specially designed for Acoustic Vibration management and long life with a backing of 50mm 1000 GSM thick absorbwool tested as per Fire Retardant ASTMD 635-1991 and IS 15061- 2002 for excellent results. Approved make: Himalayan Acoustics, HeeraDesign, Armstrong.	92	SQM
105	703	Wooden Slat NRC 0.88 with GI Studs for Auditorium side walls\nSupplying and fixing of Wooden Slat FR Grades 2430x131x16mm made of exterior grade MDF backed with acoustical Fleece providing sound absorption of 0.85 NRC as per ISO 354.To be installed with 15mm Aluminium profile conforms to Aluminium Alloy 6063-T 6.Temper As per BS:1474- 1987 and G.I Lock in clips on the back of tongue and Groove system. The density per panel is 750-800 kg/m3.The panels come with tongue & groove for seamless patterns,4-28mm Groove and visible panel. These slats are made from acoustical fibreboard with linear perforations for excellent uniformity. The perpendicular holes are available on the back of panel which are covered by black acoustical feece. Achieves sound reduction of 0.88 NRC. To be installed on Wooden Studs with a backing of . 50mm thick,1000 GSM absorb wool tested as per Fire Retardant ASTMD 635- 1991/Insulation and IS 15061-2002 for excellent results. Approved make: Himalayan Acoustics, HeeraDesign, Armstrong.	168	SQM
106	704	Stretch fabric full system with Tile 20mm for Auditorium side walls\nSupplying and Fixing Fabric System on G.I studs 2400mm X 50mm web, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing 50mm thick insulation. 600x1200x20mm tile with NRC 1.00 to be mechanically fastened on the G.I Studs. Acoustical in??ll of absorbwool 10mm which is adhered to the acoustical panel on the front side. Then 12mm/20mm Vinyl tracks are screw ??xed on to the 6mm Ply and Acoustics panels. Then the fabric is stretched over the Vinyl tracks. The installed system should provide NRC OF 1.00.Fabric colour as per Consultant/Client choice. To be installed on G.I studs 600x600mm centre to centre 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing of 50mm thick,1000 GSM absorb wool tested as per Fire Retardant ASTMD 635-1991/Insulation and IS 15061-2002 for excellent results .	157	SQM
107	705	Tiles 600x1200mm 20mm NRC 0.9 with absorb wool ,Alu profile G.I Stud for Passage side walls\nSupplying and Fixing tiles made of Wood Fibre 1mm width cement composites covered with Acoustically Transparent Absorptive microfibre on the front side 20 mm thick with an option of colours as per Consultant/Client choice size 600X1200 mm. Has excellent noise absorption of 0.9 NRC as per ISO: 354-1985 and ASTM 423-90 a, STC of 47 as per ASTM E90/413 for 25mm, Density 400 Kg/ m3, meets stringent Fire Ratings ASTM D- 876 and BS:476 , weather resistance as per IS 3308, Thermal Insulation as per IS:3346-1980 with relative humidity of 90% RH at 60o Celsius(140o Fahrenheit) for 15 days= No deterioration. Conforms to En 131682001 and are RoHS Complaint. To be installed on G.I studs 600x600mm centre to centre 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management and long life for excellent results. Approved make: Himalayan Acoustics, HeeraDesign, Armstrong.	134	SQM
108	800	HVAC WORK
109	801	AIR CONDITIONING WORK: Dismantling of existing supply air duct of stage area	1	JOB
110	802	AIR DISTRIBUTION WORK: G.I.Sheet Metal work with various gauges mentioned as below tube used as per I.S.277 & 655 and to complete the job as per the direction of site in charge and Architect/consultant.
111	802.1	0.63 mm (24G)	50	SQM
112	802.2	0.80 mm (22G)	10	SQM
113	803	G.I. Low Leakage Aerofoil Blade Volume Control Dampers as per Specification	1	SQM
114	804	Powder Coated Extruded Aluminium Linear Grilles for supply air with volume control damper Of Required Airflow Angles.	2	SQM
115	805	Powder Coated Extruded Aluminium Linear Grilles for Return air without volume control damper Of Required Airflow.	5	SQM
116	806	Insulation Work: Thermal Insulation Of Ducts with 13mm thick FR- chemically cross linked close cell polyethylene insulation having density 30 +/- 3 kg/m3 and thermal conductivity as per IS-3346/1980 on duct surface area.	60	SQM
117	900	ELECTRICAL WORK
118	901	MAIN LT PANEL /DBs\nIncoming and Outgoing: Supply and installation of main LT panel, wall mounted front operated totally enclosed vermin proof, indoor non-draw out-cubicle type power panel fabricated out of 2mm the CRCA sheet having gasketed hinged cover on each cubicle fully powder coated after 7 Tank treatment, incorporating horizontal and vertical sleeved copper busbars, complete with all internal wiring, danger board, 2 earthing legs, cable chamber etc as required, housing below mentioned switch gears / meter. It is to be manufactured by CPRI approved Manufacturer complete with fabrication, Switch gear installation. Internal wiring and Test Certificate. (GA drawing of the panel got to be approved by consultant)
119	901.1	(i) 400A FP MCCB (35kA) - 1 No. + 400A FP on Load Change Over Switch - 1 No. Approved make: L & T /Siemens/ Schneider/Legrand\n(ii) Digital VAF & KWH Meter with selector switches, control fuses. - digital type meter and CTs. Approved make: Digital meter - AE / HPL /MECO/ Enercon, Selector Switch - L & T salzer / Kaycee\n(iii) 1 - Set, TPN, Copper busbars of size 50mm x 5mm the PVC insulated suitable for 450 Amp load. Approved make: Teknic / Precifine/ Binay.\n(iv) 1 - Set, RYB, indicating lamps with resistors and fuses\n(v) 100A FP MCCB (25kA) - 4 Nos. with on Indicator Lamp. Approved make: L & T /Siemens/ Schneider/Legrand\n(vi) 63A FP MCCB (25kA) - 4 Nos. with on Indicator Lamp. Approved make: L & T /Siemens/ Schneider/Legrand\n(vii) 63A FP MCB - 2 Nos. Approved make: L & T /Siemens/ Schneider/Legrand\n	1	SET
120	902	Supply and installation of 8 way, VTP&N MCB type Distribution Board (double door) flush mounted on wall, sheet metal fabricated, powder coated, having dust-proof and vermin 'proof, gasketed and hinged door with all internals such as DIN rails, neutral-link, interconnected wiring, complete with earthing legs, housing following switch gears
121	902.1	(i) 1 no., 100A, FP, ELCB(100mA) Incomer\n(ii) 24 nos, 10/16/20A, SP, MCB Outgoing\nApproved make: L & T /Siemens/ Schneider/Legrand	2	SET
122	903	S & I of 12 SPN, DB for distribution for existing points, having below mentioned switchgears (Earth bar inside these DB should be insulated from the body)
123	903.1	(i) 1 no, 40 A, FP, ELCB(100mA), Incomer \n(ii) 8 nos, 10/16/20A, SP, MCB, Outgoing\nApproved make: L & T /Siemens/ Schneider/Legrand	1	SET
124	904	Supply and installation of 63A, FP (16kA) MCCB in company made sheet metal enclosure for Provision of Stage lighting whenever required. Approved make: L & T /Siemens/ Schneider/Legrand	2	NOS
125	905	CABELS / MAINS: S & I of 1100V grade armoured cable having sector / circular shaped aluminium / copper conductor PVC insulated cores, laid up, PVC tape wrapped inner sheathed, GI strip / wire armoured and overall extruded PVC sheathed confirming to IS: 1554, laid on wall or ceiling using GI clamps and spacers with 12 SWG GI wire as per route shown at site and further as directed by consultant in the following sizes.
126	905.1	4C x 16 Sq.mm Copper Cu XLPE Armoured Cable	85	MTRS
127	905.2	4C x 10 Sq.mm Copper Cu XLPE Armoured Cable	25	MTRS
128	905.3	4C x 6 Sq.mm Copper Cu XLPE Armoured Cable	5	MTRS
129	905.4	4C x 4.0 Sq.mm Copper Cu XLPE Armoured Cable	30	MTRS
130	905.5	3C x 2.5 Sq.mm Copper Flexible Cable	30	MTRS
131	905.6	1C x 6 Sq.mm Copper Flexible Cable	25	MTRS
132	906	Removing & Refixing of existing Aluminium/Copper Cable with clamps and spacers as per instruction of Consultant in the following sizes.
133	906.1	3 1/2C X 50/35 Sq.mm	40	MTRS
134	906.2	4 x 16/10/6/4 Sq.mm	75	MTRS
135	907	S & I of end termination of above mentioned cables including compressed type brass glands, crimping type coper lugs, insulation tape etc. as 'required complete with earthing of glands in following sizes. Approved make: Lugs -Dowell / Lotus /Jainson / 3 D, Glands- HMI / Comet / 3D.
136	907.1	3 1/2 C x 300/240 Sq.mm	2	SET
137	907.2	3 1/2 C x 120/150/185 Sq.mm	4	SET
138	907.3	3 1/2 C x 70/95 Sq.mm	2	SET
139	907.4	3 1/2C X 50/35 Sq.mm	4	SET
140	907.5	4 x 16/10 Sq.mm	12	SET
141	907.6	4 x 6/4/2.5 Sq.mm	16	SET
142	908	WIRING: Supply & Installation of concealed point wiring using 600V grade with 2.5 sqmm copper conductor PVC insulated FRLS wires (with proper R,Y,B colour code ) pulled through heavy gauge PVC conduits/casing capping laid concealed over false ceiling or in wall chases including circuit wires from the relevant DB and also including 1.5 Sq.mm Green Colour Copper earth wire and provision of grid plate type switches and sockets as approved by consultant. Approved make: Wires - Finolex / R. R. Kable / KEI / Polycab, Switches - MK Wrapped Wround Plus / Schneider Livia / L & T entis / Legrand Myris, Pipe and Accessories - Precision / Vraj / Nihir / Polycab
143	908.1	Primary light points controlled by 5A Switch (max. 8 lights points in one ckt)	25	NOS
144	908.2	Secondary light points looped from the above point 3.1 a	5	NOS
145	908.3	Primary light points direct Controlling by SP MCB (max. 4 lights controlling in one ckt)	28	NOS
146	908.4	Secondary light points looped from the above point 3.1 c	10	NOS
147	908.5	6A plug point as primary point	10	NOS
148	908.6	Secondary 6A Plug point on switch board	18	NOS
149	908.7	16A Plug Point directly taken from DB by 2.5 sq. mm. ckt mains (4 plug controlling in one ckt)	26	NOS
150	908.8	Secondary 16A Plug point on switch board	22	NOS
151	909	U-PVC TRUNKING SYSTEM FLOOR. Approved make: MK / Legrand/ Precision
152	909.1	S.I.T.C. of 80 x 50 mm U-PVC Trunking with cover plate & other accessories.	20	MTRS
153	909.2	S.I.T.C. of 50 x 50 mm U-PVC Trunking with cover plate & other accessories.	25	MTRS
154	910	EARTHING: Chemical Earthing using Electrode of size 80 mm dia, 2 meter long connected with 50X6 mm Copper internal strip complete with excavation, civil works, cast iron cover with back fill compound. The voltage between Neutral & Earth not to exceed 2 volts. including bore holes wherever required and putting the earth as per requirement. Approved make: Ashlok/ Earthlink	5	NOS
155	911	S & I of copper /GI earthing wires with PVC pipes in following sizes
156	911.1	8 SWG copper bare wire	180	MTRS
157	911.2	12 SWG copper bare wire	240	MTRS
158	912	S & I of isolated earthing / grounding system. Using insulated green copper earthing wire laid through 20mm PVC conduits from separately made earth pit to the equipment in following sizes, Approved make: Finolex / R. R. Kable / KEI / Polycab.
159	912.1	6 sqmm copper in 20mm PVC conduit	100	MTRS
160	913	S & I of Main bus for isolated earth comprising of 200mm x 40mm x 6mm thick copper bar fixed on insulated support and having 10 nos of holes and nut bolts studs for clamping the earth leads, all contained in MS/PVCbox of size 300mm x 200mm x 50mm deep and having transparent acrylic cover as approved by consultant.	2	SET
161	1000	SPECIFICATION FOR AMBIENT LIGHTING
162	1001	SITC of IP20 LED Architectural wall washer light. Housing should be Extruded Aluminium , Powder Coated. Length of Fixture should be 1000 mm. Optical Lens efficacy should not be greater than 85%. Fixture wattage should be 40W. Lens should be B21. Input Voltage should be 24V DC. Power consumption should be 40 W. Beam degree should be 30 Degree, Tempered glass thickness should not be less than 4mm. Glass and housing should be silicon sealed. Brackets should be of Stainless steel SUS 316. Diffuser: in extra-clear tempered glass, 4 mm thick, thermal shock and impact resistant. Optics: in high-performance metallic V0 polycarbonate. Coating: In several stages. epoxy cationic electrocoating, resistant to corrosive and saline environments, UV stabilising priming; .Luminous flux maintenance 80%: 50.000h (L80B20). Power factor =0.92 Photobiological safety class: exempt group EN62471. Regulations: Produced according to applicable EN60598-1 CEI 34-21 standards, degree of protection according to EN 60529 standards. Acetic acid salt spray coating pursuant to standard UNI EN ISO 9227 “Corrosion Tests in Artificial Atmosphere”. Mounting: rapid connection, the fixture does not need to be opened. LED: CRI 80 . Approved make: Qlite/Igguzini / Bega /LumenPulse	95	NOS
163	1002	SITC of IP20 LED Architectural Surface Mounted Linear Profile. Housing should be Extruded Aluminium , Powder Coated. Dimension of Product should not be less than : L:1000XW:50xH:70mm. of Fixture should be 1000 mm. Fixture wattage should be 40W. Lumen output should not be less than 3450 Lm. PMMA Diffuser.CCT-3000K. CRI>90. Brackets should be of Stainless steel SUS 316. Optics: in high-performance metallic V0 polycarbonate. Coating: In several stages. epoxy cationic electrocoating, resistant to corrosive and saline environments, UV stabilising priming; .Luminous flux maintenance 80%: 50.000h (L80B20). Power factor =0.92 Photobiological safety class: exempt group EN62471. Regulations: Produced according to applicable EN60598-1 CEI 34-21 standards, degree of protection according to EN 60529 standards. Mounting: rapid connection, the fixture does not need to be opened. LED: CRI 80 . Approved make: Qlite /Igguzini / Bega /Zumtobel	95	NOS
164	1003	SITC of LED Strip Light IP 20: Profile should be with 17.1 X 15.3 Aluminium Profile. 120 LED per meter. Wattage should not be more than 6W/Mtr. CRI>90. CCT: 3000K, Lumen Output 100lm/W. Approved make: Make/Igguzini/Bega	250	MTRS
165	1004	SITC of IP20/IK04 LED Architectural down Lighter :- . Product Features: Integrated Cold forging Aluminium housing. COB module should be CRI>90, lumen output>110lm/Watt. Beam Angle should not be less than 60 Degree. IP20. Surge Protection 4KV.Lumen flux maintenance L70 B30.System Wattage should not be more than 25 W.Lifespan up to 35,000 hours. Approved make: Qlite/Igguzini / Flos	19	NOS
166	1005	SITC of DMX512 Decoder and Driver takes a DMX signal and uses it to drive 3 channel RGB LED fixtures, providing full color and brightness control. Simply connect the DMX input on this unit, assign its DMX channel ID using the dip switches on the product, and connect the red, green and blue wires on your LED fixture. Within minutes, you'll be controlling your LED fixtures via DMX. Make : Qlite, Griven, SG	1	JOB
167	1006	MASTER CONTROLLER: The Master Controller is a very powerful processor allowing complex programming to achieve project requirements. It is also bus to Ethernet interface module which allows communication to the via Ethernet. The Controller has DMX-512 bus. The control devices connect to the bus and the control actuators connect to the DMX-512 bus. When used in this manner, the control actuators are configured to function in DMX mode. The DIN rail m module is totally self-contained with its own integral PSU. It can be fitted along with other modules in a panel of can be in separate panel to install in a central location to control multiple panels. The metal construction has been designed and built for safety, reliability & serviceability with standard DIN rail mountable fixing arrangement. The controller can control up to 512 channels (including lighting control, shade control and FCU control channels) and control devices to control up to 128 different zones. The controller gives flexibility to program different lighting scenes for each zone with all accessories amplifiers. Approved make: Qlite, Griven, SG	1	NOS
168	1100	FIRE DETECTION AND PROTECTION SYSTEM
169	1101	Supply of Hydrant System
170	1101.1	Water Storage Tank at Roof / Terrace - 25000 Ltrs. Approved make: Sintex / Omtex	1	NOS
171	1101.2	Terrace Pump to get sufficient Pressure at remotest Hydrant + Sprinkler, including On / Off Switch for Manual operation of pump. Centrifugal Pump 81M³/hr with 35MWC Head. Approved make: Kirloskar / Lubi / Flowmore	1	NOS
172	1101.3	Butterfly Valve with MOC Cast Iron. 150NB. Approved make: Kartar / Zoloto / Hawa	2	NOS
173	1101.4	Non Return Valve with MOC Cast Iron. 150NB. Approved make: Kartar / Zoloto / Hawa	1	NOS
174	1101.5	Pressure Gauge with dial size 150 mm, Range 0-10 Kg/sq.cm, SS304 / SS316 MOC, suitable for mounting on 150NB pipe. Approved make: H Guru / A N Instrument	2	NOS
175	1101.6	Power Supply Cables - Copper conductor, PVC / XLPE insulated, PVC sheathed, Armoured type 3C x 4.0 Sq.mm, for motor of centrifugal pump. Approved make: Polycab / KEI / Cords	50	MTRS
176	1102	Supply of Down Comer + Hose Reel
177	1102.1	Single Headed, (External) Hydrant Valves (As per IS: 5290 Type - A ) in SS Construction. Approved make: Newage / AAAG ( SBJ ) / Sukan	4	NOS
178	1102.2	Hose Cabinets - 16 Gauge, MS Sheet Construction (3mm Thk.). including its accessories such as \n - 2 Nos of Hose Pipe (Fire Hoses - with instantaneous Stainless Steel End Couplings to IS:636 (Type-ii) - Size - 63 mm Dia x 15 M long)\n- 1 Branch Pipe (Branch Pipe & Nozzles, (Solid Jet type) in Stainless Steel Constn. to IS:903)\nApproved make: Newage / AAAG ( SBJ ) / Sukan	4	NOS
179	1102.3	First-aid Hose Reels to IS: 884, complete with 19 mm NB Dia. X 36.5 Mtr long Rubber Hose & 6.35 mm Nozzle and accessories including necessary Piping & with Isolation Valve, located in sutable Cabinet, (Swinging Type with Reel Drum). Approved make: Newage / AAAG ( SBJ ) / Sukan	4	NOS
180	1102.4	Air Release Valves - Size 25 mm NB, in G.M. Construction. Approved make: Sant / Leader / Newage	1	NOS
181	1102.5	GM Globe Valves to IS: 778 Class II with screwed ends, Size - 25 mm NB. Approved make: Sant / Leader	1	NOS
182	1102.6	MS Pipe + Fittings - Aboveground - ERW, MS Black as per IS:1239 Medium grade/ IS:3589 with Pipe Fittings, Auxiliary Pipe Supports and Painting. MS pipe should be of pressure testing to 14 kgs/cm2 pressure. All pipes & fittings to be painted with 2 coats of Zinc Dichromate primer and two coats of approved enamel paint.\n(i) 150NB, Approved make: Surya Roshani / Jindal / Ratnamani / Welspun	6	MTRS
183	1102.7	MS Pipe + Fittings - Aboveground - ERW, MS Black as per IS:1239 Medium grade/ IS:3589 with Pipe Fittings, Auxiliary Pipe Supports and Painting. MS pipe should be of pressure testing to 14 kgs/cm2 pressure. All pipes & fittings to be painted with 2 coats of Zinc Dichromate primer and two coats of approved enamel paint.\n(i) For 100NB, Approved make: Surya Roshani / Jindal / Ratnamani / Welspun	48	MTRS
184	1102.8	MS Structure Supports. Approved make: Reputed	150	KGS
185	1102.9	Fire Brigade Inlet Connection - 4 - Way Fire Brigade inlet with in built NRV (150mm NB). Approved make: Newage / AAAG ( SBJ ) / Sukan	1	NOS
186	1103	Supply of Sprinkler System
187	1103.01	C.I Butterfly Valve - 100NB. Approved make: Kartar / Zoloto / Hawa	1	NOS
188	1103.02	Flow Switch - Magnetically coupled type, SS 304 MOC, suitable for line size 80NB, 1NO+1NC contact. Approved make: DK Instrument / A N Instrument / Honeywell	1	NOS
189	1103.03	Sprinkler k 5.6 (Brass Material), Approved make: HD Fire	104	NOS
190	1103.04	Drain Valve - 25NB, Approved make: Sant / Leader / Newage	1	NOS
191	1103.05	MS Pipe - Aboveground - ERW, MS Black as per IS:1239 Medium grade/ IS:3589 with Pipe Fittings, Auxiliary Pipe Supports and Painting.\n(i) For 100NB, Approved make: Surya Roshani / Jindal / Ratnamani / Welspun	6	MTRS
192	1103.06	MS Pipe - Aboveground - ERW, MS Black as per IS:1239 Medium grade/ IS:3589 with Pipe Fittings, Auxiliary Pipe Supports and Painting.\n(i) For 80NB, Approved make: Surya Roshani / Jindal / Ratnamani / Welspun	18	MTRS
193	1103.07	MS Pipe - Aboveground - ERW, MS Black as per IS:1239 Medium grade/ IS:3589 with Pipe Fittings, Auxiliary Pipe Supports and Painting.\n(i) For 50NB, Approved make: Surya Roshani / Jindal / Ratnamani / Welspun	42	MTRS
194	1103.08	MS Pipe - Aboveground - ERW, MS Black as per IS:1239 Medium grade/ IS:3589 with Pipe Fittings, Auxiliary Pipe Supports and Painting.\n(i) For 40NB, Approved make: Surya Roshani / Jindal / Ratnamani / Welspun	42	MTRS
195	1103.09	MS Pipe - Aboveground - ERW, MS Black as per IS:1239 Medium grade/ IS:3589 with Pipe Fittings, Auxiliary Pipe Supports and Painting.\n(i) For 25NB, Approved make: Surya Roshani / Jindal / Ratnamani / Welspun	42	MTRS
196	1103.1	MS Structure Supports, Approved make: Reputed	150	KGS
197	1104	Supply of Intelligent Addressable Fire Detection & Alarm System
198	1104.1	Addressable Fire Alarm Control Panel - Wall mounted, 1 Loop with Battery back up as per IS standard. Approved make: Siemens / Edwards / Detnov (UL / FM / LPCB / VDS Approved)	1	NOS
199	1104.2	Addressable Multisensor Detector. Approved make: Siemens / Edwards / Detnov (UL / FM / LPCB / VDS Approved)	15	NOS
200	1104.3	Addressable Manual Call Point. Approved make: Siemens / Edwards / Detnov (UL / FM / LPCB / VDS Approved)	4	NOS
201	1104.4	Addressable Hooter. Approved make: Siemens / Edwards / Detnov (UL / FM / LPCB / VDS Approved)	7	NOS
202	1104.5	Air Sampling Detection System for Main Auditorium with associated accessories and piping network etc.( VESDA ). Approved make: Siemens / Xtralis ( UL Approved)	1	SET
203	1104.6	25mm PVC Tube/pipe for above ( 170 M approx ). Approved make: Reputed	170	MTRS
204	1104.7	Addressable Monitor / Input Module to connect non addressable devices to Fire Alarm Panel. Approved make: Siemens / Xtralis ( UL Approved)	2	NOS
205	1104.8	ISI Certified 2Cx1.5 / 2.5 sq.mm, twisted shield, FRLS type, armored cable with accessories, as required. The cable specification shall meet FDA system manufacturer requirement. Approved make: Polycab / KEI / Cords	300	MTRS
206	1104.9	Automatic - Bulb Thermal Actuator for Panel / Rack ( Firepro ). Approved make: Firepro	2	NOS
207	1105	Supply of Automatic Modular Fire Extinguishers ( Clean Agent based )for Electrical Panel at Basement. Approved make: Kanex / Safex / Equivalent ISI approved	3	NOS
208	1106	Installation, Testing, Commissioning of above systems and Statutory approval from concern department including visit and Mock drill and test running of the system	1	JOB

Also Visit

Tenders

Gujarat Tenders

Safety and Security Equipment Tenders

Fire Prevention Equipments Tenders

Flame Detectors Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us