Military Engineer Services-MES has published Repair To Kota Stone Flooring Granite Work And Misc Repairs To Certain Buildings In Tech Area At Af Stn Bhuj. Submission Date for this Tender is 03-11-2020. Building Repair Tenders in GE AF BHUJ Gujarat. Bidders can get complete Tender details and download the document.
Name of Work: REPAIR TO KOTA STONE FLOORING, GRANITE WORK & MISC REPAIRS TO CERTAIN BUILDINGS IN TECH AREA AT AF STN BHUJ | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Taking down existing water proofing treatment on RCC slab / beams with bitumen felt with out damaging structure and removing the debris outside the MD land and M&L for plaster 10 mm thick on concrete surfaces in cement mortar 1:3 finished even and smooth using WPC @ 3% by weight of cement and preparing the surfaces to receive WPT treatment , applying a coat of bitumen primer confirm to IS - 3384-1986 @ 3% per sqm . providing APP modified membrane with non wovenpolyester reinforcement/mat ( centre core) by touch application over primed surfaces all as specified and directed by Engr-In- Charge | 200 | Sqm | |
2 | 2 | S&F in repairs sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, washers and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 x 460 mm, bowl size 410 x 330 x 180 mm mm Make : Nirali (Model : elegance small from regular range, glossy) or size 915 mm x 460 mm bowl size 410 x 330 x 178 mm of make : Jayana (Model : Jupiter sink with Drain board No: SBSD 5 glossy) or equivalent and nearest size of make : Lorrentto, Neelkanth, Diamond. | 5 | Each | |
3 | 3 | Demolition Cement Concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and as directed. | 126.79 | cum | |
4 | 4 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises | 300 | Sqm | |
5 | 5 | M&L for 25mm thick cement concrete type B-0 1:2:4 using 12.5mm graded aggregate in sub base of floors complete all as specified and directed | 905 | Sqm | |
6 | 6 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM-1:6 complete all as specified. | 250 | Sqm | |
7 | 7 | All as per Ser Item No 6 above but in vertical surfaces such as dado, skirting and riser etc including rendering 10mm thick in CM 1:4 all as directed by the EIC. | 25 | Sqm | |
8 | 8 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM-1:6 complete all as specified. | 55 | Sqm | |
9 | 9 | M&L for glazed digital ceramic coloured tiles Ist quality in vertical surfaces such as in skirting and dados 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and icluding plaster 10mm thick in CM 1:4 all as specified and directed. | 250 | Sqm | |
10 | 10 | M&L for Vitrified ceramic polished light shade tiles 10mm thick area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM-1:6 complete all as specified. | 350 | Sqm | |
11 | 11 | All as per Ser Item No 7 above but in vertical surfaces such as dado, skirting and riser including rendering 10mm thick in CM 1:4 etc all as directed by the EIC. | 25 | Sqm | |
12 | 12 | M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey ement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including screed bed 15mm thick in CM-1:6 complete all as specified.complete | 250 | Sqm | |
13 | 13 | M & L Kota stone slab 20-25mm thick in reiser of steps, skirting , dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete | 15 | Sqm | |
14 | 14 | Taking down chowkhat or frames with shutter (without taking off shutters from the frames) n.exc 1.5 sqm | 50 | Each | |
15 | 15 | Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm each. | 48 | Each | |
16 | 16 | Taking down shutters of any description exc 1.0 sqm but n.exc 2.00 sqm each. | 24 | Per Leaf | |
17 | 17 | Taking down and refixing in same opening after alteration to size of shutters of any description of size exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and as directed by the EIC. | 10 | Per Leaf | |
18 | 18 | S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed wih aluminium wire staples. | 20 | Sqm | |
19 | 19 | S&F75mm size of hinges butt hinges, medium weight, cold rolled mild steel. | 30 | Each | |
20 | 20 | S&F 150mm size extruded aluminium alloy handles, fabricated type. | 60 | Each | |
21 | 21 | S&F 150 mm size aluminium, anodised barrel tower bolt of extruded section. | 20 | Each | |
22 | 22 | S&F PVC door PDS-01 comprising of shutter and frame of Make : AccuraPolytech Pvt Ltd (Accucel) all as shown on drgNo.CEAA/TD/149 sheet No. 1/1 (PVC RIGIDE FOAM) , door frame/ chowkhats of solid rigid foam profile FP-6030 and shutter of solid PVC foam profile FP 7114 with 4 mm thick high pressure compact laminate as infill (Panel) including necessary hardeware fittings all as specified and directed by EIC. | 20 | SQM | |
23 | 23 | M&L for aluminium window with double side hung shutter for glazing and gauging and frame with one or more rebates made out of JINDAL/ INDAL anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle and anodised aluminum fittings such as stay, hinges glazing with 5 mm thick tinted sheet glass and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture as per drg No. CEAA/TD/133 sheet No. 1/2 and 2/2 dated 13.12.02 except fixed glazing (FG) all as specified and directed.(Tint of glass shall be approved by GE) Note :- Aluminium grill fixed under above item shall be measured and paid separately | 40 | Sqm | |
24 | 24 | S & F Anodised aluminium Sliding window shutters, frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified | 250 | KG | |
25 | 25 | S & F Anodised aluminium shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos. in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. | 35 | Sqm | |
26 | 26 | Supply only aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 6mm x 7mm complete all as specified | 50 | Sqm | |
27 | 27 | S & F tinted sheet glass 5.50mm thick, selected quality and glazing with rubber beading in squares NOT exc 0.5 sq. m in each pane for fixing in aluminium sliding windows. Note- Rubber beading shall be measured & paid separately. | 25 | Sqm | |
28 | 28 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed wih stainless steel wire staples complete all as specified. | 25 | Sqm | |
29 | 29 | Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed. | 25 | RM | |
30 | 30 | Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed. | 40 | RM | |
31 | 31 | M&L 15mm dia bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed | 25 | RM | |
32 | 32 | M&L 20mm dia bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors | 40 | RM | |
33 | 33 | S&F in repairs fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for size 15mm bore. | 20 | Each | |
34 | 34 | S&Fin repair stop valve 15 mmdia cast chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed in repairs. | 5 | Each | |
35 | 35 | ditto as per above item but concealed type | 7 | Each | |
36 | 36 | S&F repair for shower rose for 15 mm dia cast chromium plated screwed down high pressure with long shunk screwed end for iron pipe or for unions complete all as specified and directed. | 5 | Each | |
37 | 37 | S&F in repairs vitreous china wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.. | 5 | Each | |
38 | 38 | S&Fin repair pillar taps of 15 mm bore, fancy type with capstan head, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed. | 5 | Each | |
39 | 39 | S&F of waste pipe of 32mm dia PVC pipe for WHB with long screwed shanks and fly nut flange end bedded in red lead cement and other end fixed complete all as specified and directed. | 10 | Each | |
40 | 40 | S&F bevelled edge mirror of size 600mm x 450mm selected quality glass mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws. | 5 | Each | |
41 | 41 | S&F in repairs soap dish any type fixed to plugs with chromium plated brass screws. | 5 | Each | |
42 | 42 | S&F in repairs Aluminium anodised tubular towel rail 20mm dia D Type 60cm long between flanges complete all as specified and directed. | 10 | Each | |
43 | 43 | S&F Vitreous china squatting pan ,Orissa Pattern Size 580x440 mm white with integral foot rests ( Excluding flushing cistern and flush pipe) | 4 | Each | |
44 | 44 | S&F cast iron 'P' or 'S' traps 100 mm bore of pipe. | 4 | Each | |
45 | 45 | S/F grating square 150mm size of PTMT (minimum weight 100 gms ) | 5 | Each | |
46 | 46 | S&F in repairs PVC low level valve less, symphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10 Ltr capacity. | 10 | Each | |
47 | 47 | M&L for PVC (SWR ) gully trap 125/110mm, setting and jointing with solvent cement .all as directed by Engr-in-charge | 5 | Each | |
48 | 48 | M&L for 75mm dia cast iron floor trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4 ) | 7 | Each | |
49 | 49 | Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water remove Dust, debries/ rubbish etc., complete all as specified and as directed. | 270 | Sqm | |
50 | 50 | M&L for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces. | 50 | Sqm | |
51 | 51 | M&L for 10 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement as specified. | 120 | Sqm | |
52 | 52 | M&L Rendering 15mm thick in Cement Mortar 1:4 (External) on Brick Walls or on Concrete Surfaces in Two Coats, 1st Coat of 10mm thick and 2nd Coat of 5mm thick including mixing with WPC to 2nd Coat as per Manufacturer's instructions, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.\nNOTE : Integral Water Proofing Compound shall be Measured and Paid separately as ‘Supply only’ under relevant Items.\n | 100 | Sqm | |
53 | 53 | M&L preparing new Plastered Surfaces of Walls and applying Three Coats of White Wash, complete all as specified and as directed. | 20 | Sqm | |
54 | 54 | M&L preparing new plastered Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed. | 260 | Sqm | |
55 | 55 | M&L preparing new Plastered Surfaces of Walls and applying Two Coats of Acrylic Washable Distemper over a coat of Chalk Whitening complete all as specified and as directed. | 100 | Sqm | |
56 | 56 | M&L for preparation of new or previously untreated concrete or PCC block masonry external surfaces and applying two coats of exterior emulsion paint (in camouflage pattern as approved by the GE) over a coat of primer all as specified and directed by EIC using any one of following material :-\nMake Brand\nNerolac Suraksha\nAsian ACE\nBerger Walmasta\n | 100 | Sqm | |
57 | 57 | M&L for preparing new plastered ceiling/soffits of chajjas surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge. | 50 | Sqm | |
58 | 58 | Complete removal of existing treatment on ceiling surfaces and applying two coats of white wash by finishing the surfaces even and smooth complete all as specified and directed by EIC. | 150 | Sqm | |
59 | 59 | M&L for preparing new plastered wall surfaces and applying two coats of distemper with distemper oil emulsion, white or tinted including one coat of wall care Putty by finishing the surfaces even and smooth complete all as specified and directed by EIC. | 300 | Sqm | |
60 | 60 | Complete removal of existing treatment on wall surfaces and applying two coats of distemper with distemper oil emulsion, white or tinted including one coat of wall care putty by finishing the surfaces even and smooth complete all as specified and directed by EIC. | 400 | Sqm | |
61 | 61 | Dismantling of cast iron,PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as directed by Engr-in-charge following bore of pipe | |||
62 | 61.01 | a) 110mm dia of pipe | 10 | RM | |
63 | 61.02 | b) 75mm dia of pipe | 10 | RM | |
64 | 62 | S&F of UPVC drain self it pipes, single sockets ISI marked IS 13592 type 'B' in any length, jointed with solvent cement fixed in walls and the dia of pipes ( make :- Astral type 'B' pipes or equivalent) | |||
65 | 62.01 | a) 110mm dia of pipe | 10 | RM | |
66 | 62.02 | b) 75mm dia of pipe | 10 | RM | |
67 | 63 | S&F of UPVC junction single 'Tee' ISI marked IS 14735 jointed with solvent cement fixed in walls and the dia of pipes ( make :- Astral type 'B' pipes or equivalent) | |||
68 | 63.01 | a) 110mm dia of pipe | 4 | Each | |
69 | 63.02 | b) 75mm dia of pipe | 4 | Each | |
70 | 64 | S&F of UPVC sockets equal ISI marked IS 14735 jointed with solvent cement fixed in walls and the dia of pipes ( make :- Astral type 'B' pipes or equivalent) | |||
71 | 64.01 | a) 110mm dia of pipe | 4 | Each | |
72 | 64.02 | b) 75mm dia of pipe | 4 | Each | |
73 | 65 | S&F of UPVC bend equal ISI marked IS 14735 jointed with solvent cement fixed in walls and the dia of pipes ( make :- Astral type 'B' pipes or equivalent) | |||
74 | 65.01 | a) 110mm dia of pipe | 5 | Each | |
75 | 65.02 | b) 75mm dia of pipe | 5 | Each | |
76 | 66 | Supply and fixing Rotational moulded polythelene water storage tank ISI marked, cylindrical vertical with closed top including dismantling existing water tank and removing to store of following capacity (Make - Sintex / Euro / Cera) : - | |||
77 | 66.01 | 1000 litres capacity | 7 | Each | |
78 | 66.02 | 750 litres capacity | 5 | Each | |
79 | 66.03 | 500 litres capacity | 5 | Each | |
80 | 67 | Dismantling stone slabs and tiles of laid bedded and pointed in any mortar any description or thickness in floors, aprons etc. | 80 | Ten Sqm | |
81 | 68 | M&L for 75 mm thick cement concrete type C-2 (1:3:6) using 40 mm graded stone aggregate as in sub base under interlocking tiles. | 450 | Sqm | |
82 | 69 | M&L 60 mm thick (M-35 mix) glossy rubber mould interlocking tiles (paver blocks red & yellow colour topping) conforming to IS-15658-2006 laid dry over 30 mm coated sand bed, size & pattern of tiles all as directed by Engineer-in-Charge. | 450 | Sqm | |
83 | 70 | S&F PVC/PTMT shelf fixed to walls with screws including necessary drilling holes. Make :Prayag cat No 190-C or equivalent of polytuf / pearl. | 5 | Each | |
84 | 71 | S&F 6mm thick tinted glass as approved by GE, fixed to existing aluminium door/ windows including hacking out existing glass and provn of rubber beading. | 15 | Sqm | |
85 | 72 | Hacking out old broken glass (any thickness, size, quality or description) from wooden /steel frames or stone , concrete or brick surrounds, glazed with putty or fixed with beads. | 35 | Sqm | |
86 | 73 | S&F 4.00 mm thick sheet figured glass pin headed type and glazing with oil putty in square n exc 0.50 Sqm in each pane. | 20 | Sqm | |
87 | 74 | S&F in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) including fixing bolts and Plastic water closet seat ( black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device) complete all as specified and directed. | 5 | Each | |
88 | 75 | S & F for Vitreous China urinals, bowl type flat back, size 465X355X265mm white (minimum), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; (Excluding flushing cistern and waste pipe ) | 5 | Each | |
89 | 76 | M&L for 50mm thick cement concrete type B-1 1:2:4 ( 20mm graded aggregate ) finishing the surface even and smooth without using extra cementall as directed by Engr-in charge | 200 | Sqm | |
90 | 77 | M&L for 100mm thick cement concrete type B2 1:2:4 using 40mm graded aggregate finished even and smooth without using extra cement. | 200 | Sqm | |
91 | 78 | Forming dummy joints 30 mm deep X 10 mm wide filled with sealing compound grade 'B' | 20 | XRM | |
92 | 79 | M&L for 20mm thick Granite (Z Black) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including 20mm thick screed bed of cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed. NOTE : Cost of Screed Bed shall deemed to be included in QUOTED UNIT RATE. | 65 | Sqm | |
93 | 80 | M&L Granite (Z Black) tiles 12 to 15mm thick machine cut, in vertical surfaces such as riser, skirting, dado, etc. including rounding edges, nosing, pointing on nose, etc., over and including 12mm thick screed bed in cement mortar 1:3 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified and as directed.\nNOTE : Cost of Screed Bed shall deemed to be included in QUOTED UNIT RATE.\n | 20 | Sqm | |
94 | 81 | M&L Cement Concrete 1:3:6 (40mm graded aggregate), 75mm thick as in Plinth Protection, etc., laid in alternate bays, finishing Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed. | 220 | Sqm | |
95 | 82 | M&L Bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5kg. per sq. m per coat, complete all as specified and as directed. | 15 | Sqm | |
96 | 83 | M&L Polythene film, black, 50micron laid in floors/Sunken floors, complete all as specified and as directed. | 5 | Sqm | |
97 | 84 | Dismantling Plain or Corrugated Steel Sheeting of any gauge and thicknessin any pattern Coverings, complete all as specified and as directed. | 218 | Sqm | |
98 | 85 | Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. Make : JSW or equivalent as approved. | 208 | Sqm | |
99 | 86 | Ditto but plain sheets as in ridges etc | 10 | Sqm | |
100 | 87 | M&L Cement Concrete 1:5:10 (40mm graded aggregate) in lean Concrete/ Filling of Sunken floor etc., complete all as specified and as directed. | 4 | Cum | |
101 | 88 | M&L for precast cement concrete 1:5:8 block masonry type using 20mm graded stone aggregate with solid blocks, exc 10cm in width and setting in cement sand mortar 1:6 complete all as specified and as directed. | 4 | Cum | |
102 | 89 | M&L Cutting chases, in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and as directed. | 50 | RM | |
103 | 90 | Dismantling Wall and Ceiling Boards (Fibre, Pulp, Insulation, etc.) or Insulation Boards /Blankets/Slabs, any description and any thickness including Cover Fillets, Cornices, etc., complete all as specified and as directed. | 591.5 | Sqm | |
104 | 91 | M&L 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling both side, grid made of aluminium/G.I./M.S. as per specification and drawingcomplete all as specified and as directed. | 149.5 | Sqm | |
105 | 92 | M&L for false ceiling of perforated particle board/tiles 60X60 cm in size and 12mm thick fixed with nails to timber frame work or with staples on snap grid fixed with screws in wall/ceiling, grid made of aluminium/G.I./M.S. as per specification and drawingcomplete all as specified and as directed. | 260 | Sqm | |
106 | 93 | Demolition of cement concrete (reinforced) of any description and in any position notother wise specifically provided for and removing debris outside the MD land. | 2 | Cum | |
107 | 94 | M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia. complete all as specified and directed. | 90 | Kg | |
108 | 95 | M&L for TMT bars 6 mm to 8 mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia. complete all as specified and directed. | 45 | Kg | |
109 | 96 | M&L for providing precast reinforced cement concrete of type B1 (1:2:4) (using 20 mm graded stone aggregate) as in cover for drain set in cement mortar (1:4) complete all as specified and directed.. | 2 | Cum | |
110 | 97 | S & F Solid PVC Wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing | 182 | Sqm | |
111 | 98 | S & F 5 mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on towall to make PVC frame as per specification and drawing | 510 | RM |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail