| 1 | 1 | Taking down of chowkhat or frame (without taking off shutter from frame) area not exc 1.50 Sqm each including builder hardware fitting complete all as specified and as directed. | | 10 | Each |
|---|
| 2 | 2 | All as per item No 1.00 here in Before but area exc 1.50 Sqm & not exc 4.00 Sqm each complete all as specified and as directed. | | 10 | Each |
|---|
| 3 | 3 | Taking down shutters of any description area not exc 1.00 Sqm each leaf including builder hardware fitting complete all as specified and as directed. | | 20 | Per Leaf |
|---|
| 4 | 4 | All as per item No 3.00 here in Before but area exc 1.00 & not exc 2.00 Sqm each leaf complete all as specified and as directed. | | 30 | Per Leaf |
|---|
| 5 | 5 | S&F solid PVC moulded door frame of size 50x47mm, made out of 5mm thick one side prelaminated and other side plain colour PVC sheet & edges will be painted to match with prelaminated sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and as directed. | | 50 | RM |
|---|
| 6 | 6 | S&F Factory made Solid PVC Moulded Door Shutter 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed. | | 14 | Sqm |
|---|
| 7 | 7 | S&F 2nd class hard wood plain, solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. | | 0.3 | Cum |
|---|
| 8 | 8 | S&F 30 mm thick, 2nd class hard wood, factory made, kiln seasoned, pressure treated, gauged & skeleton door shutter, open rebated & prepared to receive glass, gauge etc, with sash bar, fitted with cut & mitred beads, for securing glass/ gauze etc. Size of shutter members as specified in SSR part-I sec-8.24(b); supplied and fitted to chowkats complete all as specified and as directed. | | 10 | Sqm |
|---|
| 9 | 9 | S&F 35 mm thick, 2nd class hard wood, factory made, kiln seasoned, pressure treated gauged & skeleton door shutter, open rebated & prepared to receive glass, gauge etc, without sash bar, fitted with cut & mitred beads, for securing glass/ gauze etc. Size of shutter members as specified in SSR part-I sec-8.24(a); supplied and fitted to chowkats complete all as specified and as directed. | | 15 | Sqm |
|---|
| 10 | 10 | S&F 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. | | 15 | Sqm |
|---|
| 11 | 11 | S&F 35mm thick, factory made, 2nd class hard wood, plain framed, panelled shutters (two panels) with lock rail and 9mm BWP commercial or 12mm veneered particle board panel with commercial veneer on both faces, the size of rail and stile as per IS 1003 (Part-I), kiln seasoned and chemically pressured treated complete all as specified and as directed. | | 10 | Sqm |
|---|
| 12 | 12 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. | | 5 | Sqm |
|---|
| 13 | 13 | S&F MS holdfast, wall ties and similar articles confirming to Fe-410-0 or Fe-310-0 complete all as specified and as directed. | | 10 | Kg |
|---|
| 14 | 14 | S&F 100mm size stainless steel butt hinges complete all as specified and as directed. | | 120 | Each |
|---|
| 15 | 15 | S&F 75 mm stainless steel butt hinges complete all as specified and as directed. | | 60 | Each |
|---|
| 16 | 16 | S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed. | | 80 | Each |
|---|
| 17 | 17 | S&F 125mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed. | | 60 | Each |
|---|
| 18 | 18 | S&F 100 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed. | | 60 | Each |
|---|
| 19 | 19 | S&F 75mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed. | | 60 | Each |
|---|
| 20 | 20 | S&F 150mm aluminium anodised shutter hooks and eyes complete all as specified and as directed. | | 30 | Each |
|---|
| 21 | 21 | M&L plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work etc complete all as specified and as directed. | | 1.2 | Cum |
|---|
| 22 | 22 | S&F 3mm thick sheet glass, ordinary quality, glazing with oil putty in steel window / fixed with wooden beads in wooden window, Square area of each pain not exc 0.50 Sqm complete all as specified and as directed. | | 13 | Sqm |
|---|
| 23 | 23 | M&L stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden/ Aluminium beading complete all as specified and as directed. | | 15 | Sqm |
|---|
| 24 | 24 | All as per item No 23.00 here in Before but fixed in repair complete all as specified and as directed. | | 108 | Sqm |
|---|
| 25 | 25 | S&F Plain fillets square, rectangular or triangular in section exc 13.00 Sqcm but not exc 25.00 Sqcm, bull nosed, splayed, chamfered or rounded on one edge or face, secured with nails or brads etc complete all as specified and as directed. | | 210 | RM |
|---|
| 26 | 26 | All as per item No 25.00 here in Before but sectional area exc 3.00 Sqcm but not exc 6.00 Sqcm complete all as specified and as directed. | | 265 | RM |
|---|
| 27 | 27 | Dismantling floor, hearth or wall tiling including cement mortar beading (but not backing) and removing rubbish off the premises complete all as specified and as directed. | | 100 | Sqm |
|---|
| 28 | 28 | M&L joint free, Non skid ceramic, coloured tiles, 7mm to 8mm thick, 1st quality, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm (400x400mm) in flooring, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the shade of tiles over and including 20mm thick screed in cement mortar 1:4 complete all as specified and as directed. | | 40 | Sqm |
|---|
| 29 | 29 | M&L joint free, Coloured, glazed ceramic tiles of size 400 x 300 x 7mm thick or 600 x300mm size 7mm thick (As directed by Engineer in Charge) in vertical surfaces (including designed borders ) such as skirting and dados, set and jointed in neat cement slurry & pointed in white cement mixed with pigment to match with the shade of tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.\nNote:- (Cost of Designer border in vertical surface shall deemed be included in quoted rates) | | 60 | Sqm |
|---|
| 30 | 30 | Demolition of stone slab or tiles laid bedded and jointed to any mortar as in floor etc. complete all as specified and as directed. | | 12.5 | Ten Sqm |
|---|
| 31 | 31 | M&L machine cut Kota stone slab 20 to 25 mm thick in flooring, laid and jointed with grey cement slurry with pigment to match the shade of the slab including rubbing and mirror polishing over and including 20mm thick screed in cement mortar 1:6 complete all as specified and as directed. | | 100 | Sqm |
|---|
| 32 | 32 | M&L 20mm thick marble work using Makarana white marble stone (table rubbed and polished) laid in pattern (10 to 15 cm wide strips between flooring) as in floor including pointing in white cement and marble dust (1:2) to match with shade of Makarana white marble shade over and including 20mm thick screed in cement mortar 1:6 complete all as specified and as directed. | | 10 | Sqm |
|---|
| 33 | 33 | M&L 10 to 12 mm thick Makarana white Marble stone work in skirting/dado including pointing in white cement and marble dust (1:2) to match with shade of Makarana white marble shade over and including 10mm thick screed in cement mortar 1:4 complete all as specified and as directed. | | 5 | Sqm |
|---|
| 34 | 34 | M & L 20mm thick Granite (of any type) work (table rubbed and polished), in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm thick screed in cement mortar 1:6 complete all as specified and as directed. | | 15 | Sqm |
|---|
| 35 | 35 | M&L rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed. | | 25 | RM |
|---|
| 36 | 36 | Dismantling wrought iron or mild steel work of any discretion not otherwise provided for complete all as specified and as directed. | | 2 | Qtl |
|---|
| 37 | 37 | Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed. | | 200 | Kg |
|---|
| 38 | 38 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15cm thickness (below or above ground floor) & removal of debris outside MD land complete all as specified and as directed. | | 17 | Cum |
|---|
| 39 | 39 | M&L 75 mm thick PCC 1:3:6, type C-1, using (20mm graded stone aggregate) as in plinth protection/hard standing and finished the surface even and smooth without using extra cement complete all as specified and as directed. | | 150 | Sqm |
|---|
| 40 | 40 | M&L PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in floor, finished fair & even to receive top layer etc complete all as specified and as directed. | | 6 | Cum |
|---|
| 41 | 41 | Demolition Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. | | 5.3 | Cum |
|---|
| 42 | 42 | M&L brick work with sub class 'B' bricks, built in cement mortar 1:6, straight or curved on plan exc 6m mean radius complete all as specified and as directed. | | 3 | Cum |
|---|
| 43 | 43 | M&L brick work with sub class 'B' bricks, built in cement mortar 1:4, straight or curved on plan to any radius, as in half brick thick walls complete all as specified and as directed. | | 20 | Sqm |
|---|
| 44 | 44 | Taking down cement plaster of any description including racking out joints hacking for key and scrubbing down with water complete all as specified and as directed. | | 700 | Sqm |
|---|
| 45 | 45 | M&L 15mm thick rendering in cement mortar 1:4 mixed with water proofing compound on brick work or concrete surfaces, finished fair & even complete all as specified and as directed. (Note: WPC shall be measured & paid separately under respective item of this Schedule.) | | 225 | Sqm |
|---|
| 46 | 46 | M&L 10 mm thick rendering on brick wall in cement mortar 1:4 finished even and fair including mixing of water proofing compound as per manufacturers instruction followed by rough cast plaster complete all as specified and as directed. (Note: WPC shall be measured & paid separately under respective item of this Schedule.) | | 200 | Sqm |
|---|
| 47 | 47 | Supply only integral water proofing compound complete all as specified and as directed. | | 100 | Kg |
|---|
| 48 | 48 | M&L 15mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces, finished fair & even without using extra cement complete all as specified and as directed. | | 225 | Sqm |
|---|
| 49 | 49 | M&L 10mm thick rendering in cement mortar 1:3 on ceiling surfaces, finished fair & even without using extra cement complete all as specified and as directed. | | 100 | Sqm |
|---|
| 50 | 50 | M&L 3mm thick wall care putty to old or new plastered wall surface, trawelled to an even and smooth surface complete all as specified and as directed. | | 225 | Sqm |
|---|
| 51 | 51 | M&L 3mm thick wall care putty to old or new plastered ceiling surface, trawelled to an even and smooth surface complete all as specified and as directed. | | 100 | Sqm |
|---|
| 52 | 52 | M&L preparation of new plastered wall surfaces and applying two coats of Oil Bound Distemper over and including a coat of alkali resistant primer complete all as specified and as directed. | | 225 | Sqm |
|---|
| 53 | 53 | All as per item No 52.00 here in before but on ceiling complete all as specified and as directed. | | 100 | Sqm |
|---|
| 54 | 54 | M&L preparation of new plastered wall surfaces and applying two coat of cement base paint complete all as specified and as directed. | | 325 | Sqm |
|---|
| 55 | 55 | M&L preparation of new wooden surface over 10cm width/girth and applying two coats of synthetic enamel paint over and including one coat of pink primer complete all as specified and as directed. | | 125 | Sqm |
|---|
| 56 | 56 | All as per Item No 55.00 here in before but not exc 10cm width or girth when unconnected with other painting or when painted in different tint complete all as specified and as directed. | | 25 | 10 RM |
|---|
| 57 | 57 | M&L preparation of new steel surface over 10cm width/girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed. | | 240 | Sqm |
|---|
| 58 | 58 | M&L preparation of newly external plastered surfaces of wall etc and applying two coat of acrylic emulsion paint exterior grade (100% Acrylic) over and including one coat of primer complete all as specified and as directed. | | 100 | Sqm |
|---|
| 59 | 59 | Dismantling Asbestos cement corrugated or semi corrugated sheets in roof covering complete all as specified and as directed. | | 800 | Sqm |
|---|
| 60 | 60 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc complete all as specified and as directed. | | 340 | Sqm |
|---|
| 61 | 61 | Dismantling timber scantlings 40 Sqcm and over in section, in any position unframed work complete all as specified and as directed. | | 7 | Cum |
|---|
| 62 | 62 | All as per item No 61.00 here in before but as in fillets, rails, posts, rafters, purlins, etc. under 40 Sqcm in section complete all as specified and as directed. | | 625 | RM |
|---|
| 63 | 63 | Taking down roof trusses, of span above 4m up to 8m, coupled rafters or trussed beams complete all as specified and as directed. | | 7 | Each |
|---|
| 64 | 64 | Taking down roof trusses, of span above 4m up to 8m, coupled rafters or trussed beams, for renewal of any defective members (timber renewed to be measured separately) and reassembling including housing and fixing trusses etc. after repairs including tightening up wedges, cotters bolts etc. complete all as specified and as directed. | | 4 | Each |
|---|
| 65 | 65 | Fixing only Second class hard-wood in scantlings, wrought as in framed work (in truss) (Using old wood retrieved from item Nos 61.00 or 63.00 ) including all extra labour for carefully taking out old nails, screws, etc, cutting out defective portions if any, and returning same to store, and all other labours incidental to fabrication of old timber complete all as specified and as directed. | | 1 | Cum |
|---|
| 66 | 66 | Fixing only Second class hard-wood in scantlings, wrought, as in unframed work (in Purlin/Rafter) (Using old wood retrieved from item No 61.00) including all extra labour for carefully taking out old nails, screws, etc. cutting out defective portions if any, and returning same to store, and all other labours incidental to fabrication of old timber complete all as specified and as directed. | | 2 | Cum |
|---|
| 67 | 67 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979, grade St.-240 including one shop coat of zinc chromate primer (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and as directed. | | 4000 | Kg |
|---|
| 68 | 68 | S&F steel work in tubular column, prline, rafter etc using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 including one shop coat of zinc chromate primer (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and as directed. | | 900 | Kg |
|---|
| 69 | 69 | S&F mild steel plate (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes with welded attachment to GI pipe in base/ connections etc. including one shop coat of zinc chromate primer (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and as directed. | | 600 | Kg |
|---|
| 70 | 70 | S&F MS angle for brackets/purlins cut to shape drilled and counter sunk for screws including bending, welding angles as necessary confirming to Fe-410-0 or Fe-310-0, brackets shall be fixed with 10mm dia 50 mm long dash through fasteners in concrete and brick work including one shop coat of zinc chromate primer (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and as directed. | | 810 | Kg |
|---|
| 71 | 71 | S&F Mild steel bolts purpose made with hexagonal or square head one end and screwed the other or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long, dia of neck exc 12 mm but not exc 20mm, length 60cm complete all as specified and as directed. | | 57 | Kg |
|---|
| 72 | 72 | S&F Mild steel screw bolts (machine made) dia of neck 10mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long complete all as specified and as directed. | | 25 | Kg |
|---|
| 73 | 73 | Cutting grooves 75 mm wide & 65 mm deep in brick wall/ RCC surfaces at any location, shaping horizontal face with mechanical cutter and grooves filled with PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) mixed with chemical compound SUPER LATEX OR DR FIXIT OF PIDILITE INDUSTRIES LTD or SBR LATEX of STP LTD mixed with proportion 200 ml per 50 Kgs cement as per manufactures instruction complete all as specified and as directed. | | 80 | RM |
|---|
| 74 | 74 | S&F Gl frame work grid size 605x605mm for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed. | | 340 | Sqm |
|---|
| 75 | 75 | S&F Hangers 6mm dia GI (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed. | | 340 | Sqm |
|---|
| 76 | 76 | S&F 15mm thick integral densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595x595mm, at any height, fixed or laid/ inserted to timber/ GI/ Aluminium framework with screws complete all as specified and as directed. | | 340 | Sqm |
|---|
| 77 | 77 | S&F in position Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. | | 450 | Sqm |
|---|
| 78 | 78 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/valley gutter, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. | | 20 | Sqm |
|---|
| 79 | 79 | S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. Fixed with L-type or screws J-type or cranked hook bolts complete all as specified and as directed. | | 340 | Sqm |
|---|
| 80 | 80 | S&F Asbestos cement two piece adjustable serrated ridge for corrugated or semi corrugated sheets, ridge 6mm thick, Fixed with 'L'-type or 'J' type or cranked hook bolts complete all as specified and as directed. | | 20 | RM |
|---|
