Indian Institute Of Technology-IITB has published Checking , Repairing , Providing , Fixing , Testing And Commissioning Of Fire Fighting And Fire Alarm System For New Technical Building ( Administrative Bldg . ) And Triveni Apartment At Iit Roorkee Saharanpur Campus ( U . P . ) .. Submission Date for this Tender is 30-10-2020. Fire Alarm Systems Tenders in IIT Roorkee Uttarakhand. Bidders can get complete Tender details and download the document.
| Name of Work: Checking, Repairing, Providing, Fixing, Testing & Commissioning of Fire Fighting & Fire Alarm System for New Technical Building (Administrative Bldg.) & Triveni Apartment at IIT Roorkee Saharanpur Campus (U.P.). | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | SITC of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 10 Zone panel for fire alarm system 250 Watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required amplifier 1 No operation on 230V AC/24 V DC supply conforming to IEC-268. Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc. complete as required -1 set. Amplifier -1 No. Monitor panel for loudspeaker complete with output selector, ON/OFF switch, fuse, visual indications etc. complete as required- 1 No. Gooseneck microphone with stand and ON/OFF switch- 1 No. Main ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters, terminal blocks etc. complete as required -1 set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos.12 volt, 7 AH each sealed maintenance free batteries -1 set. (Make: Agni/GST/Ahuja) DSR E & M 2018, Item No. 17.1.10 | item1 | 2 | Set |
| 2 | 2 | Supplying, installation, testing & commissioning sector panel suitable for 4 Zone, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. Make: Agni/GST/ASES (DSR E & M 2018, Item No. 17.1.9.1) | item2 | 7 | Each |
| 3 | 3 | Supplying, installation, testing & commissioning sector panel suitable for 10 Zone, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. Make: Agni/GST/ASES (DSR E & M 2018, Item No. 17.1.9.3) | item3 | 2 | Each |
| 4 | 4 | Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. Make: Agni/GST/ASES (DSR E & M 2018, Item No. 17.1.6) | item4 | 24 | Each |
| 5 | 5 | Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. Make: Agni/GST/ASES (DSR E & M 2018, Item No. 17.1.3) | item5 | 40 | Each |
| 6 | 6 | Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. Make: Agni/GST/ASES (DSR E & M 2018, Item No. 17.1.2) | item6 | 320 | Each |
| 7 | 7 | Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring complete as required. Make: Polycab/Havells/Finolex (DSR E & M 2018, Item No. 17.5.2) | item7 | 900 | Mtrs. |
| 8 | 8 | supplying & drawing of size 1 X 1.5 sq mm of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel conduit . Make: Polycab/Havells/Finolex (DSR E & M 2018, Item No. 1.17.1) | item8 | 440 | Mtrs. |
| 9 | 9 | supplying & laying of size 20mm dia of steel conduit flexible along with accessories in surface / recess incluiding painting in case of surfac coduit or cutting the wall and making good the same in case of recessed conduit . Make: Polycab/Havells/Finolex (DSR E & M 2018, Item No. 1.20.1) | item9 | 90 | Mtrs. |
| 10 | 10 | SITC of electric driven 900 lpm at 35 m Head monoblock terrace pump set consisting of bronze / C.I impeller, SS shaft, mechanical seal, cast iron body, 900 LPM, 35 Mtr Head complete with suitable induction motor TEFC type suitable for operation on 415 volt, 3 phase, 50 Hz AC, 2900 RPM, with suitable base frame horizontal foot mounted type with class B or F insulation complete with foundation etc as required (DSR & AOR 2019, Item No. 4.1) (Terrace Pump) (Make: Kirloskar / Crompton / M & P). | item10 | 2 | Set |
| 11 | 11 | Providing & Fixing 100A, 16 KA, rating and breaking capacity TPMCCB in existing cubical panel board including drilling holes in cubicle panel, making connection etc. as required. (DSR E & M 2018, Item No. 2.2.1) | item11 | 2 | Nos. |
| 12 | 12 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe 150 mm dia conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required (Make: Jindal / Jindal Hissar / Tata) (DSR & AOR 2019, Item No. 7.8) | item12 | 60 | Mtrs. |
| 13 | 13 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe 100 mm dia conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required (Make: Jindal / Jindal Hissar / Tata) (DSR & AOR 2019, Item No. 7.7) | item13 | 40 | Mtrs. |
| 14 | 14 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe 80 mm dia conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required (Make: Jindal / Jindal Hissar / Tata) (DSR & AOR 2019, Item No. 7.6) | item14 | 6 | Mtrs. |
| 15 | 15 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe 25 mm dia conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required (Make: Jindal / Jindal Hissar / Tata) (DSR & AOR 2019, Item No. 7.1) | item15 | 6 | Mtrs. |
| 16 | 16 | Supplying, fixing, testing & commissioning of 150 mm dia double flanged sluice valve of rating PN 1.0 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : (Make: Castle / Sant / Kartar).(DSR & AOR 2019, Item No. 12.6) | item16 | 3 | Each |
| 17 | 17 | Supplying, fixing, testing & commissioning of 100 mm dia double flanged sluice valve of rating PN 1.0 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : (Make: Castle / Sant / Kartar).(DSR & AOR 2019, Item No. 12.5) | item17 | 1 | Each |
| 18 | 18 | Supplying, fixing, testing & commissioning of 80 mm dia double flanged sluice valve of rating PN 1.0 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : (Make: Castle / Sant / Kartar).(DSR & AOR 2019, Item No. 12.4) | item18 | 3 | Each |
| 19 | 19 | Supplying, fixing, testing & commissioning of 65 mm dia double flanged sluice valve of rating PN 1.0 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : (Make: Castle / Sant / Kartar).(DSR & AOR 2019, Item No. 12.3) | item19 | 2 | Each |
| 20 | 20 | Providing, installation, testing and commissioning of non-eturn valve of 150 mm size confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :(Make: Castle / Sant / Kartar).(DSR & AOR 2019, Item No. 14.7) | item20 | 2 | Each |
| 21 | 21 | Providing, installation, testing and commissioning of non-eturn valve of 100 mm size confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :(Make: Castle / Sant / Kartar).(DSR & AOR 2019, Item No. 14.5) | item21 | 2 | Each |
| 22 | 22 | Providing, installation, testing and commissioning of non-eturn valve of 80 mm size confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :(Make: Castle / Sant / Kartar).(DSR & AOR 2019, Item No. 14.4) | item22 | 2 | Each |
| 23 | 23 | Supplying, fixing, testing and commissioning of butterfly valve of 150 mm dia PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :(Make: Castle / Sant / Kartar).(DSR & AOR 2019, Item No. 11.6) | item23 | 2 | Each |
| 24 | 24 | Supplying, fixing, testing and commissioning of butterfly valve of 100 mm dia PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :(Make: Castle / Sant / Kartar).(DSR & AOR 2019, Item No. 11.5) | item24 | 2 | Each |
| 25 | 25 | Supplying, fixing, testing and commissioning of butterfly valve of 80 mm dia PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :(Make: Castle / Sant / Kartar).(DSR & AOR 2019, Item No. 11.4) | item25 | 2 | Each |
| 26 | 26 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. (DSR & AOR 2019, Item No. 20) | item26 | 2 | Set |
| 27 | 27 | Supplying and fixing satainless steel single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Make: Lifeguard / Newtech/Omexe (DSR & AOR 2019, Item No. 9.2 | item27 | 3 | Each |
| 28 | 28 | Supplying and fixing of 4 way fire brigade connection of cast iron body with gun metal male female instantaneous inlet coupling with chain and as required for suitable size MS pipe connection cofirming to IS 904 as required : Make: Lifeguard / Newtech/Omexe (DSR & AOR 2019, Item No.19.2 | item28 | 2 | Each |
| 29 | 29 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia 30 Mtr long water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.Make: Lifeguard / Newtech/Omexe (DSR & AOR 2019, Item No. 17.2 | item29 | 6 | Each |
| 30 | 30 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia stainless steel male and female couplings grade 304 duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : (Make: Grandfoss/Indfos) DSR & AOR 2019, Items No.16.2 | item30 | 10 | Each |
| 31 | 31 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. (Make: Grandfoss/Indfos) DSR & AOR 2019, Items No.22 | item31 | 4 | Each |
| 32 | 32 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb pendent type sprinklers of rating 68 degree centigrade with required accessories : Make: HD/Tyco/Equa DSR & AOR 2019, Items No.21 | item32 | 120 | Each |
| 33 | 33 | Providing, fixing, testing & commissioning of adjustable rosettefor 15mm dia in white finish with UL listed or FM approved as required Make:HD/Tyco//Equa DSR & AOR 2019, Items No.29 | item33 | 120 | Each |
| 34 | 34 | Providing & fixing of 2 mm thiock photo luminescent signage with UV protection size 150 mm x 300 mm complete as required (Make:Agni/Mr.Lite) | item34 | 40 | Each |
| 35 | 35 | Powder Fire Extinguisher Capacity 06 Kg duly ISI marked conforming to IS: 15683:2006, with IS 14609, ISI marked ABC powder; Complete with IS 4947 ISI marked Gas Cartridge with squeeze grip release valve, discharge pipe, locking arrangement, pressure gauge, operation manual and bracket. Operating Temperature: - 10ºC to + 55ºC. Make: Lifeguard / Newtech / Omexe | item35 | 16 | Each |
| 36 | 36 | CO2 type Fire Extinguisher ISI marked conforming to IS: 15683. Capacity 4.5 Kg. Complete with delivery hose horn, squeeze grip/ wheel type release valve, locking arrangement, operation manual and bracket. Operating Temperature: - 30ºC to + 55ºC. Make: Lifeguard / Newtech / Omexe | item36 | 10 | Each |
| 37 | 37 | Water Fire Extinguisher Gas Cartridge type ISI marked conforming to IS: 15683. Capacity 9 liter. Complete with IS 4947 Gas Cartridge, delivery hose, squeeze grip release valve, locking arrangement, operation manual and bracket Make: Lifeguard / Newtech / Omexe | item37 | 16 | Each |
| 38 | 38 | Dismantaling, checking & refilling of existing ABC type fire extinuishers at various location & reinstallation complete as required | item38 | 92 | Each |
| 39 | 39 | SITC of factory fabricated metal clad dust and vermin proof- floor mounted 500A cap 440V, 50Hz, 3 Phase and neutral electric feeder pillar double door 400 mm depth duly powder coated spray painted with separate chamber for instruments (e.g. ampere eter, volt meter, frequency meter, KWH meter etc.) & switch gear (like I/C & O/G CB's/MCCB's, C/o switch with exceptionable/rotary handle etc). The feeder pillar/panel shall have 500 A, 415V TPN electrolyte aluminium bus bar as per IS 8623 insulated with heat sink sleeve and mounted on nonhygroscopic supports with detachable side with hinge and locking. The switches shall be completed with lug and cable gland of suitable size of cable with connection as required. The feeder pillar should be made with 2mm CRCA sheet. The feeder pillar should be fixed on MS channel 75mm x 40mm x 6mm size and mounted on MS angle iron 50mm x 50mm x 5mm size frame 450mm height with cross support complete as per direction of site in charge. | item39 | 38 | Sq.cm |
| 40 | 40 | Supply and Fixing 40 to 63A TPMCB 10 KA 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. | item40 | 4 | Nos. |
| 41 | 41 | SITC of three phase fully automatic star-delta starter for 20 HP submersible pump motor in sheet enclosure AC-3 duty, 415 volt, 50 Hz, 3 phase, relay range 28-42 Amp with overload, single phasing, phase reversal, phase imbalance etc. and with timer. | item41 | 4 | Nos. |
| 42 | 42 | SITC of three phase fully automatic star-delta starter for 10-15 HP submersible pump motor in sheet enclosure AC-3 duty, 415 volt, 50 Hz, 3 phase, relay range 13-22 Amp with overload, single phasing, phase reversal, phase imbalance etc. and with timer. | item42 | 2 | Nos. |
| 43 | 43 | Supply & Fixing of 4 x 25 sq mm PVC insulated PVC Sheathed aluminium conductor armoured cable working voltage upto and including 1100 V confirming to IS 7098 (Part-I) in following manners i/c connections etc on surface as required. (Make: Polycab / Havells / Finolex) | item43 | 80 | Mtrs. |
| 44 | 44 | …..do….but…4 x 16 sq mm | item44 | 40 | Mtrs. |
| 45 | 45 | Repairing & servicing of existing first aid hose reel, wall mounted swinging type complete with drum & bracket of MS construction, spray painted in post office red complete as required | item45 | 18 | Each |
| 46 | 46 | Providing and fixing of dial type pressure gauge with isolation cock and pipe at hydrant station 100 mm dia calibration 0-10 Kg. | item46 | 4 | Each |
| 47 | 47 | Repairing of existing microprocessor based fire alarm main control panel with 250 watt amplifier PA system operating on 230 V, 50 Hz with visual and audio indicators of short circuit, fault, open circuit fault, fire conditions, feather touch switch suitable to operate on 24 V DC with power supply & battery charger i/c replacement of zone card complete with all connections as reqd. (a)Fire Alarm Main Control Panel | item47 | 2 | Job |
| 48 | 48 | SITC of remote control panel for operation of terrace pump jockey & main fabricated with 2 mm thick MS sheet with locking arrangement, on/off indication light, start/stop push botton & bugger complete with connection etc as required. | item49 | 1 | Job |
| 49 | 49 | Supplying & laying of 6 x 1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring complete as required. Make: Polycab/Havells/Finolex. | item50 | 60 | Mtrs. |
| 50 | 50 | Repairing & servicing of main fire fighting electrical control panel including replacement of 32 Amp 220 volt cotactors for star delta starter, 200Amp MCCB, ST 100 Timer, Volt meter, Amp meter, indicators lights for automatic operation of fire fighting system. | item51 | 1 | Job |
| 51 | 51 | Repairing ,rewinding & servicing of 12.5 HP main fire fighting pump sets including replacement of mechanical seal and defective parts of DB pump and reinstallation of the same after neccessary repairs complete as required | item52 | 2 | Job |
| 52 | 52 | After completion of fire alarm system as per schedule of work, checking & rectification of all internal circuit wiring, loop wiring, zone wiring in existing recess conduit for fire alarm system & PA system & making functional of both the building New Technical Building & Triveni Apartment complete as required. | item53 | 1 | Job |
| 53 | 53 | After completion of fire fighting system as per schedule of work, checking, indentify & repair of all underground & above ground pipe line leakages to maintain the pressure as required manual/auto mode including all the accessories & making functional of both the building New Technical Building & Triveni Apartment complete as required. | item54 | 1 | Job |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
