| 1 | 1 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). | | 28.61 | Cum |
|---|
| 2 | 2 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix / Design Mix | | 84.98 | Cum |
|---|
| 3 | 3 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands , coping, bed plates, anchor blocks, sills, chhajjas lintel, beam etc. | | 556.59 | Sqm |
|---|
| 4 | 4 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor Five level.Thermo-mechanically Treated bars (Conforming of relevent IS code) | | 9347.35 | Kg |
|---|
| 5 | 5 | Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor Five level in. Cement Mortar 1:6 (1-Cement:6-coarse sand). | | 150.95 | Cum |
|---|
| 6 | 6 | Half brick masonry with Non modular flyash brick conforming to IS: 12894 :2002 of class designation 10.0 in Superstructure , above plinth level upto floor five level .Cement mortar 1 : 4 (1 cement : 4 coarse sand) | | 22.01 | Sqm. |
|---|
| 7 | 7 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).Extra for using Greater size of glazed tiles and MAT finished tiles up to 450x450 mm size | | 17.36 | Sqm |
|---|
| 8 | 8 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar)..Extra for using Greater size of glazed tiles and MAT finished tiles up to 300x450 mm size | | 92.87 | Sqm |
|---|
| 9 | 9 | P & F 1st quality Vitrified tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete.size 600 mm X 600 mm | | 268.77 | Sqm |
|---|
| 10 | 10 | Add extra for Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 , using 5kg. adhesive per sum of tile area, in average 3mm thickness instead of cement mortar. | | 268.77 | Sqm |
|---|
| 11 | 11 | Providing and fixing Granite stone slab mirror polished and machine edge cut in Walls, Pillars, Steps, Shelves, Sills Counters, Floors etc. laid on 12 mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Black/South :Above 3601 Cm2 Slabs. | | 30.59 | Sqm |
|---|
| 12 | 12 | Making khurras 450 x 450mm with average minimum thickness 50mm cement concrete 1 : 2:4 over P.V.C. Sheet 1 Mtr. x 1 Mtr. x 40micron finished with 12mm cement plaster 1 : 3 and one coat of neat cement, rounding edges and making and finishing the out let complete. | | 10 | Each |
|---|
| 13 | 13 | Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification : | | 47.6 | Sqm |
|---|
| 14 | 14 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : | | 136 | Mtr. |
|---|
| 15 | 15 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes.Type B110 mm diameter | | 50 | Mtr. |
|---|
| 16 | 16 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Coupler,110mm dia | | 10 | Nos. |
|---|
| 17 | 17 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Single Tee with Door,110mm dia | | 10 | Nos. |
|---|
| 18 | 18 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Single Plain Shoe,110mm dia | | 10 | Nos. |
|---|
| 19 | 19 | Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50×25 mm, or base ties of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4 (M15 grade) complete as directed by Engineer-in-Charge :Profile C. | | 59.4 | Mtr. |
|---|
| 20 | 20 | Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13×3 mm, 10 cm long embedded in cement concrete block 15×10×10 cm. of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4 mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :Partly fixed and partly openable [fixed area not to exceed 33%]. | | 100.35 | Sqm |
|---|
| 21 | 21 | Providing and fixing external grade board solid core single/ Double leaf flush door shutters IS: 2202 (Part-II)1996 marked using Phenol formal dehyderesin in glue both sides with approved stainless steel fittings complete as per annexure 'A' :30 mm thick :Commercial Veneer both side. | | 24.49 | Sqm |
|---|
| 22 | 22 | Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately).For Fixed portion ,Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) | | 122.98 | KG |
|---|
| 23 | 23 | For shutters builtup standard tubular sections of openable doors , windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately).Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) | | 81.98 | KG |
|---|
| 24 | 24 | Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.)With glass panes of 4.0 mm thickness (weight not less than 10.0 kg/ sqm.) as per IS : 2835 | | 20.5 | Sqm |
|---|
| 25 | 25 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15×3 mm and nuts & bolts completeGalvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides. | | 100.35 | Sqm |
|---|
| 26 | 26 | Providing and fixing Square bars or other flat welded to window, ventilators etc. | | 35.74 | Kg |
|---|
| 27 | 27 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm thick glass panes. | | 49.95 | Sqm |
|---|
| 28 | 28 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20 mm thick. | | 1209.73 | Sqm |
|---|
| 29 | 29 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete | | 1500 | Sqm |
|---|
| 30 | 30 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: New work(Two or more coats) including prepartion of base with primer, putty, lippy etc complete in all respect. | | 2000 | Sqm |
|---|
| 31 | 31 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on New Work | | 200 | Sqm |
|---|
| 32 | 32 | P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor | | 5 | Each |
|---|
| 33 | 33 | P & F water closet Seat Covers with brass hinges complete :Solid PVC (ISI marked) grade-I White for EWC. | | 5 | Each |
|---|
| 34 | 34 | P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall:PVC with PVC bend as per IS : 7231 | | 5 | Each |
|---|
| 35 | 35 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 32 mm waste pipe complete including cutting & making good the wall :Size 630 mm x 500 mm dia for counter top | | 10 | Each |
|---|
| 36 | 36 | Brass bib-cock 20 mm dia | | 25 | Each |
|---|
| 37 | 37 | P & F Pilllar Cocks (IS :8934 Mark) of superior quality and approved make:C.P. Pillar cock fancy type ,15mm \nnominal bore. | | 10 | Each |
|---|
| 38 | 38 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete :Brass wt.1000 gm, 25mm. | | 15 | Each |
|---|
| 39 | 39 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. -do- with 45 Cm. long pipe and nut. | | 15 | Each |
|---|
| 40 | 40 | P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including placing on terrace( at all floors),making connection etc. complete of approved design. | | 3000 | Ltr |
|---|
| 41 | 41 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineerin-Charge. (Concealed work including cutting chases and making good the walls etc.) :15 mm nominal outer dia pipes. | | 150 | Mtr |
|---|
| 42 | 42 | 25 mm nominal outer dia pipes. | | 100 | Mtr |
|---|
| 43 | 43 | Construction of chamber in all type of soil with 230/300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.,size 450 x 450mm depth upto 0.5 M Cement cover with frame | | 3 | Each |
|---|
| 44 | 44 | Inside size 300 × 300 mm depth upto 0.5 M Cement cover with frame | | 5 | Each |
|---|
| 45 | 45 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes :Type A110 mm diameter. | | 20 | Rmt |
|---|
| 46 | 46 | Providing and fixing steel gate, grating, and grills made of angles, tees, square bars, flats, or black pipe with holdfast and fittings complete as per design and drawing including cutting, welding and fabrication with priming coat of red oxide : | | 200 | Kg |
|---|
| 47 | 47 | Grading roof for water proofing treatment with water proofing compound : | | 34.45 | cum |
|---|
| 48 | 48 | Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron & length upto 6 mm, mixing fibre @ 125 grams per 50 kg of cement in cement mortar, including providing and mixing water proofing material in mortar @ 1 kg. per 50 kg. of cement, all complete as per direction of Engineer-in-Charge. | | 344.49 | sqm |
|---|