Construction Of Science Block At Gsss Jangla In Tehsil Chirgaon Distt . Shimla ( Sh-C/O Building Portion I/C W . S . S . I And Rain Harvesting Tank Site Development Etc . )

Tender Notice

25494546
Construction Of Science Block At Gsss Jangla In Tehsil Chirgaon Distt . Shimla ( Sh-C/O Building Portion I/C W . S . S . I And Rain Harvesting Tank Site Development Etc . )
Indian
Himachal Pradesh
28-09-2020
29-09-2020

Tender Details

Construction Of Science Block At Gsss Jangla In Tehsil Chirgaon Distt . Shimla ( Sh-C / O Building Portion I / C W . S . S . I And Rain Harvesting Tank Site Development Etc . )

Key Value

Document Fees
INR 5000 /-
EMD
INR 171900.00 /-
Tender Value
INR 1.39 Crore /-

BOQ Items

Name of Work: Construction of Science Block at Govt. Sr. Secondary School Jangla. ( SH:- C/O Building portion including W.S. & S.I. Rain water Harvesting Tank and site development etc. complete )
Sr. No. Item Description Item Code / Make Quantity Units
1 1 EARTHWORK Cutting in earth work by manual means in all heights and depths and in all kinds of soil, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out rock where blasting is prohabited and their intermediate classification of soils including dewatering wherever required, setting out to required lines, levels as shown on the drawing and as per directed by the Engineer-in-Charge at site, according to the H.P.P.W.D. specifications of 1990 ( one thousand nine hundred ninety ) volume-i and sorting out useful and unuseful materials and transportation of the unuseful material for disposing at dumping site ( to be arranged by the contractor ) to the satisfaction of Engineer-in-Charge through all modes of transportation including head load, animal load or mechanical means alongwith its levelling fine dressing and with all kind of labour, machineries, tools equiped and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All usefull materials, such as stones, shingles, aggregate and slates shall be properly stacked at the site to the maximum possible extent in all leads lifts through all modes of transportation and used/removed as per the direction of Engineer-in-Charge. Any damage to the private / public property during execution will be restored by the contractor what so ever the nature of the same may be. The serviceable materials will be stacked to specified / dimension in all leads and lifts as per direction of the Engineer in charge. 74.57 Per cubic metre
2 2 Excavation in earth work in all heights and depths and in all kinds of soil, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out rock where blasting is prohabited and their intermediate classification of soils including dewatering wherever required, setting out to required lines, levels as shown on the drawing and as per directed by the Engineer-in-Charge at site, according to the H.P.P.W.D. specifications of 1990 ( one thousand nine hundred ninety ) volume-i and sorting out useful and unuseful materials and transportation of the unuseful material for disposing at dumping site ( to be arranged by the contractor ) to the satisfaction of Engineer-in-Charge through all modes of transportation including head load, animal load or mechanical means alongwith its levelling fine dressing and with all kind of labour, machineries, tools equiped and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All usefull materials, such as stones, shingles, aggregate and slates shall be properly stacked at the site to the maximum possible extent in all leads lifts through all modes of transportation and used/removed as per the direction of Engineer-in-Charge. Any damage to the private / public property during execution will be restored by the contractor what so ever the nature of the same may be. The serviceable materials will be stacked to specified / dimension in all leads and lifts as per direction of the Engineer in charge. 70.4 Per cubic metre
3 3 Excavation in foundation trenches in earth work in all heights and depths and in all kinds of soil, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out rock where blasting is prohabited and their intermediate classification of soils including dewatering wherever required, setting out to required lines, levels as shown on the drawing and as per directed by the Engineer-in-Charge at site, according to the H.P.P.W.D. specifications of 1990 ( one thousand nine hundred ninety ) volume-i and sorting out useful and unuseful materials and transportation of the unuseful material for disposing at dumping site ( to be arranged by the contractor ) to the satisfaction of Engineer-in-Charge through all modes of transportation including head load, animal load or mechanical means alongwith its levelling fine dressing and with all kind of labour, machineries, tools equiped and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All usefull materials, such as stones, shingles, aggregate and slates shall be properly stacked at the site to the maximum possible extent in all leads lifts through all modes of transportation and used/removed as per the direction of Engineer-in-Charge. Any damage to the private / public property during execution will be restored by the contractor what so ever the nature of the same may be. The serviceable materials will be stacked to specified / dimension in all leads and lifts as per direction of the Engineer in charge. 542.87 Per cubic metre
4 4 Excavation in drains and channels in earth work in all heights and depths and in all kinds of soil, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out rock where blasting is prohabited and their intermediate classification of soils including dewatering wherever required, setting out to required lines, levels as shown on the drawing and as per directed by the Engineer-in-Charge at site, according to the H.P.P.W.D. specifications of 1990 ( one thousand nine hundred ninety ) volume-i and sorting out useful and unuseful materials and transportation of the unuseful material for disposing at dumping site ( to be arranged by the contractor ) to the satisfaction of Engineer-in-Charge through all modes of transportation including head load, animal load or mechanical means alongwith its levelling fine dressing and with all kind of labour, machineries, tools equiped and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All usefull materials, such as stones, shingles, aggregate and slates shall be properly stacked at the site to the maximum possible extent in all leads lifts through all modes of transportation and used/removed as per the direction of Engineer-in-Charge. Any damage to the private / public property during execution will be restored by the contractor what so ever the nature of the same may be. The serviceable materials will be stacked to specified / dimension in all leads and lifts as per direction of the Engineer in charge. 56.18 Per cubic metre
5 5 Disposal of excavated earth by mechanical means on approved dumping site arranged by the contractor i.e. through all mode of transportation including head load animal load or mechanical means alongwith transportation of the useful material for disposing including payment of prescribed charges of dumpinmg to the owner of dumping site through all modes of transportation including head load animal load or mechanical means alongwith its levelling, fine dressing and to complete the work by mechanized means and labour ( if any required) All useful materials such as stones, aggregate and slates shall be sorted out and stacked along roads side any loss of the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be dully compensated by him in all respect as pee direction of Engineer-in-Charge. 162.29 Per Cubic metre
6 6 Filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete within all leads and lifts of materials and other incidentals. 23.83 Per Cubic metre
7 7 FORMWORK Providing form work with steel plates of 3.15mm (Three decimal One five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden/ steel battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work as per direction of Engineer-in- Incharge including carriage of materials in all leads and lifts through all modes of transportation.:-
8 7.01 Foundation footing and basis of columns, etc. and mass concrete. 118.46 Per Square meter.
9 7.02 Flat surfaces such as soffits of suspended floors, roofs, landings and the like :-Floor etc. upto any thickness in super structure for all floor level and heights. 1032.23 Per square metre
10 7.03 Columns, pillars, posts and struts :- Square rectangular or polygonal in plan in super structure for all floor level in all heights 324.52 Per square metre
11 7.04 Stair cases with sloping or stepped soffits excluding landing in super structure for all floor levels in all heights. 36.03 Per square metre
12 7.05 Beams, cantilever, girders and lintels :- sides and soffits of beams, beam haunching cantilevers, bressumers and lintels in super structures upto any floor level in all heights 363.96 Per square metre
13 7.06 Vertical surfaces such as wall (any thickness) partition and the like including attached pillasters, buttresses plinth and string courses and the like in super structures for all floor level in all heights. 68.92 Per square metre
14 7.07 Edges of slabs and break in floors and walls upto any width in super structure for all floor level in running metre in all heights. 388.39 Per running metre
15 7.08 Cornices and mouldings. 19.11 Per square metre
16 8 CEMENT-CONCRETE-WORK Providing and laying cement concrete 1:6:12(One cement: Six sand: Twelve graded broken/crushed stone aggregate 40mm(forty millimeters nominal size) mechanically mixed by concrete mixer and vibrator and curing complete, excluding cost of form work in foundation and plinth, within all leads, lifts of materials and other incidentals. 44.73 Per cubic metre
17 9 Providing and laying cement concrete 1:4:8(One cement Four sand :Eight graded cursed/broken stone aggregate 40mm) (forty millimeters nominal size) mechanically mixed by concrete mixer and vibrator and curing complete, excluding cost of form work in foundation and plinth, within all leads, lifts of materials and other incidentals. 8.27 Per cubic metre
18 10 Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 Graded stone aggregate 20mm nominal size) Mechanically mixed by concrete mixer and vibrator and curing complete excluding cost of form work in foundation and plinth in breast and retaining walls etc. including carriage of material within all leads and lifts as per direction of Engineer-in-charge.
19 10.01 In foundation and plinth 14.06 Per cubic metre
20 10.02 Walls including attached buttresses,pilasters and their caps and bases and string courses etc. upto all floor level: 4.39 Per cubic metre
21 11 Providing and laying cement concrete 1:2:4 (1cement :2sand :4 graded stone aggregate 20mm nominal size ) Mechanically mixed & vibrated and curing complete excluding cost of centring and shuttering including carriage of materials in all leads and lifts in foundation and plinth.In foundation and plinth as per directions of Engineer-in-Charge 3.99 Per cubic meter.
22 12 R.C.C.-WORK Providing and laying cement concrete work 1:1½:3 (1 cement : 1½ sand : 3 graded stone aggregate 20 mm nominal size) mechanically mixed by concrete mixer vibrated for compacting concrete and curing complete excluding cost of form work and reinforcement for reinforced concrete work,but including carriage of materials in all leads and lifts in superstructure for all floor in all heights
23 12.01 Foundation, footing, bases of columns and the like and mass concrete. 76.48 Per cubic metre
24 12.02 Walls (any thickness but not less than 0.10 metre thickness) including attached pillasters, plinth and string courses etc. from top of foundation. 6.57 Per cubic metre
25 12.03 Columns, pillars, posts and struts in superstructure all floor heights. 37.58 Per cubic metre
26 12.04 Suspended floors, roofs, landing and shelves and their support, balconies, beams, girders, bressumers and cantilever. 255.49 Per cubic metre
27 12.05 Stair cases (except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing :- 5.53 Per cubic metre
28 13 Providing and laying upto all floor levels cement concrete work 1:1½:3 (1 cement : 1½ sand : 3 graded stone aggregate 20 mm nominal size) to give smooth and even surface including centring and shuttering but excluding cost of reinforcement and curing complete mechanical mixed and vibrated for compecting reinforced concrete including carriage of materials in all leads and lifts in String courses, copings, bed plates, anchor blocks, plain windows sills and the like : 4.29 Per cubic metre
29 14 Providing and laying upto all floor levels cement concrete work 1:1½:3 (1 cement : 1½ sand : 3 graded stone aggregate 20 mm nominal size) to give smooth and even surface including centring and shuttering but excluding cost of reinforcement and curing complete mechanical mixed and vibrated for compecting reinforced concrete including carriage of materials in all leads and lifts in moulding as in cornices, window sills etc. not exceeding 15cm in girth. 1.5 Per cubic metre
30 15 Providing Tor steel reinforcement for Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wires completed and other incidentals due for its completion for all floors, within all leads and lifts of materials and other incidentals. 57593 Per Kilogram
31 16 Applying cement slurry on RCC slab or cement concrete work using 2.75 kg of cement per squaremetre of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete. 1068.26 Per square metre
32 17 Providing in RCC work smooth finishing of the exposed surface with cement mortar 1:3 (1 cement : 3 sand) including carriage of material in all leads and lifts :- 1057.63 Per square metre
33 18 Applying a coat of hot bitumen mexphalt 80/100 ( Eighty/Hundred ) or equivalent using 1.70 Kgs ( One decimal seventy kilogram) per square metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil; within all leads and lifts of materials and other incidentals. 37.01 Per square metre
34 19 Providing and laying cement concrete 1:8:16 (1cement: 8sand: 16 graded stone aggregate 20mm nominal size) Mechanically mixed and curing complete on slab and floor excluding the cost of form work. screed laid under flooring including carriage of materials in all leads and lifts. 5 Per Cubic metre
35 20 MASONRY-WORK Second class brick work using common burnt clay building bricks superstructure above plinth level for all floor level in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads and lifts :- 150.83 Per Cubic metre
36 21 Half brick masonary in common burnt clay building bricks in superstructure above plinth level to all floor levels in cement mortar 1:4 (1 cement : 4 sand) including carriage of material in all leads and lifts :- Second class brick 272.49 Per Square metre
37 22 STONE-WORK Random rubble masonry / polygonal rubble masonry (uncoursed / brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size)in cement mortor 1:6 (1 cement :6 sand) in breast walls and retaining walls including carriage of material within all leads and lifts as per direction of Engineer-in-charge. 4.06 Per Cubic metre
38 23 Square rubble masonary coursed with hard stones of approved quality in foundation and plinth in Retaining walls/Breast walls in cement mortor 1:6 (1 cement :6 sand) including rakingout joints Including carriage of material within all leads and lifts as per direction of Engineer-in-charge. 140.97 Per Cubic metre
39 24 Stone filling behind retaining wall.Including carriage of material within all leads and lifts as per direction of Engineer-in-charge. 4.29 Per cubic metre
40 25 Stone Soling properly hand packed filling interstices with spalls and consolidating including spreading water complete Including carriage of material within all leads and lifts as per direction of Engineer-in-charge. 33.72 Per Cubic metre
41 26 Providing weapholes in breast walls/ retaining walls in stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slope of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 Including carriage of material within all leads and lifts as per direction of Engineer-in-charge. 56.26 Per Running Metre
42 27 WOOD-WORK Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws 35 mm thick second class deodar wood complete including carriage of materials within all leads and lifts. 4.24 Per Square metre
43 28 Providing and fixing flush door shutters Phenol bounded of ALPRO / Centry I.S. 2202 decorative type core of block board construction with frames of first class hard wood and well matched waterproof plyveneering on both faces of shutter 35mm thick including black enamelled M.S. butt hinges with necessary screws within all leads, lifts of materials and other incidentals 33.72 Per Square metre
44 29 Providing and fixing 6 mm thick ply wood lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately) including carriage of material in all leads and lifts complete as per the direction of Engineer-in-Charge. 58.8 Per Square metre
45 30 Providing and fixing E-Board of approved shade and pattern size 600 mm X 600 mm X 6 mm thick of approved shade, E-Grid of module size 600 mm X 600 mm shall be supported by 4/6 mm dia. G.I. wire from the purlins/ soffits with butter fly clip ( two shape) including carriage of material in all leads and lifts complete as per the direction of Engineer-in-Charge. 177.16 Per square metre
46 31 Providing and fixing thick fibre cement board in ceiling of Everest or its equivalent with butt jointing fixed on angle iron and T sections of 25 X 25 X 5 mm as per detail complete ( frame work to be measured and paid for seperately) including carriage of material within all leads and lifts as per direction of Engineer-in-Charge. 12.69 Per square metre
47 32 Providing and fixing 19 mm thick water proof termite resistant commercial board ISI marked IS No. 1659 of UNIPLY / GREENPLY or its equivalent in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) in all floor.\n 270.87 Per square metre
48 33 Providing and fixing 19 mm thick water proof termite resistant commercial board ISI marked IS No. 1659 of UNIPLY / GREENPLY or its equivalent shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc complete ) in all floor 89.61 Per square metre
49 34 Providing and fixing 1 mm thick coloured and or plain lamination sheet of approved shade and quality fixed on board/ply with approved adhesive and nails complete including carriage of material within all leads and lifts. 93.43 Per square metre
50 35 Providing and fixing Ist class Indian teak wood plain square edged cover fillets beeding 19 X 6 mm section including mitring at junction with wooden screws and nails etc. complete including carriage of materials in all leads and lifts. 475.25 Per running metre
51 36 Providing and fixing 0.63 mm thick PGI sheet lining / ceiling etc. of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) including carriage of materials within all leads and lifts. 3.24 Per Square metre
52 37 Providing and fixing aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. completed within all leads, lifts of materials and other incidentals.
53 37.01 300 X 16 mm size 8 Each
54 37.02 250 X 16 mm size. 17 Each
55 38 Providing and fixing aluminium tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.
56 38.01 250 X 10 mm size 36 Each
57 38.02 200 X 10 mm size. 6 Each
58 39 Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etc. completed within all leads, lifts of materials and other incidentals.
59 39.01 125 mm size 59 Each
60 39.02 100 mm size. 207 Each
61 40 Providing and fixing Magnetic catcher with screws etc. complete. inclusive for carriage of materials within all leads, lifts and other incidentals. 205 Each
62 41 Providing and fixing oxidized M.S. hasps and stapple for cup board 90 mm size with necessary screws etc complete. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals.
63 41.01 115 mm size. 15 Each
64 41.02 90 mm size. 98 Each
65 42 Providing and fixing MS sliding door bolts with necessary screws etc. completed within all leads, lifts of materials and other incidentials. (i) 300 X 16 mm 1 Each
66 43 Providing and fixing MS tower bolts with necessary screws etc. completed within all leads, lifts of materials and other incidentials. (i) 250 X 10 mm 2 Each
67 44 Providing and fixing MS handles with necessary screws etc. completed within all leads, lifts of materials and other incidentials. (i) 125 mm 4 Each
68 45 PAVING-AND-FLOORING Kota stone slab mirror polised / uniform colour flooring 20mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab Including rubbing and polishing complete 19 mm ( nineteen milimeter ) thick mirror polished slab size not less than 550mmx550mm including carriage of materials within all leads and lifts. 622.5 Per Square metre
69 46 Kota stone slab 25mm thick mirror polished of slab size not less than 550mmx550mm in risers of steps,skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry fixed with pigment to match the shade of the slabs including rubbing and polishing complete including carriage of material within all leads and lifts. 50.38 Per Square metre
70 47 40 mm thick.cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of materials within all leads and lifts :- 7.31 Per Square metre
71 48 Providing and laying 20mm. thick acid proof tiles of size upto 300 x 300mm. of specified shade in floors, treads of steps and landing laid on a bed of 12mm. thick cement mortar 1:3(1 ement: 3 sand) jointing with cement slurry mixed with pigment to match the shade of tilesinclusive for carriage of materials within all leads, lifts and other incidentals. 186.97 Per Square metre
72 49 Providing and laying 20mm. thick acid proof tiles of specified shade and sizes in skirting risers of steps and dado 12mm (Twelve milimetre) thick cement mortar 1:3(One cement is to Three Sand) and jointed with cement slurry. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals 10.71 Per Square metre
73 50 Providing and laying black granite stone in flooring 20mm (average )thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thickinclusive for carriage of materials within all leads, lifts and other incidentals 64.28 Per Square metre
74 51 Making Half round nosing in granite/marble / kota stone etc. 20mm thick including finished with granite polish mirror finish as per sample approved including carriage of materials within all leads and lifts: 201.49 Per running metre
75 52 Providing and fixing Garsa Stone 12 mm cladding on R.C.C. surface side as on the faces of Arch masonary walls etc. on 12 mm thick cement plaster 1:3 ( 1 cement: 3 sand) and jointed with cement slurry i/c scaffolding etc. complete including carriage of material within all leads and lifts. 87.38 Per Square metre
76 53 Providing and laying heavy 60 mm thick duty precast cement conrete inter locking paver blocks vibro compacted upto M- 50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for seperately including carriage of material within all leads and lifts.. 66.08 Per square metre
77 54 ROOF-COVERING Providing and fixing 0.60mm thick prepainted steel sheet of approved brand and shade and design in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of material within all leads and lifts. 527.66 Per square metre
78 55 Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets of approved brand, shade and design in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges including carriage of material within all leads and lifts. 68.22 Per running metre
79 56 Providing and fixing valley 90cm overall 0.60mm thick prepainted steel sheet of approved brand,shade and design in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of material within all leads and lifts. 33.78 Per running metre
80 57 Providing and fixing flashing 38cm overall with 0.60mm thick prepainted sheet of approved brand shade and design in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts. 202.74 Per running metre
81 58 Providing and fixing 30cm wide 120cm overall box type 0.60mm thick prepainted sheet of approved brand shade and design with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating gutter fixed with bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design (frame work to be measured and paid for separately) :- 0.63 mm ( zero point sixty three millimetre) thick sheet including carriage of material within all leads and lifts. 87.28 Per running metre
82 59 Providing and fixing on wall face PVC (Finolex) Dplast rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete. 150 mm dia pipe including carriage of material within all leads and lifts. 172.65 Per Running metre
83 60 Providing and fixing on wall faces PVC(Finolex) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of material within all leads and lifts.
84 60.01 PVC Plain bend 150mm(One hundred fifty milimetre) dia. 15 Each
85 61 Providing and fixing PVC clamps of approved design with steel screws and rawal plugs etc. complete including carriage of material within all leads and lifts. 122 Each
86 62 Providing and fixing M.S.B.P. sheet 2.00 mm thick in eaves board / ornamental facia / soffit & ceilings including cutting,fixing welding to steel roof members and applying a coat of red lead primer etc. complete ( Base member of steel work shall be measured and paid seperately )as per instrucrtions of Engineer-in-Charge including carriage of material in all leads and lifts :-:- 210.88 Per square metre
87 63 STEEL-WORK Steel work of make TATA/SAIL?RASHTRIYA ISPAT or its equivalent welded in built up sections, trusses and framed work, including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials within all leads and lifts as per the direction of Engineer-in-Chief.
88 63.01 In beams, joists, channels, angles,, tees ,flat with connecting plates, angles cleats, as in main and cross beams, hips, jack rafters, purlins connected to common rafter and the like including carriage of material within all leads and lifts. 150.79 Per quintal
89 63.02 In gratings, framed, guards, bars ladders and railing, brackets including hollow sections of various sizes and similar works :- 94.46 Per quintal
90 64 Providing and fixing screen with main frame of size 50 mm X 50 mm M.S. hollow square sections and distributing member of 25 mm X 25 mm M.S. hollow square complete in all respect as per drawing including carriage of material within all leads and lifts. 38.2 Per Square metre
91 65 Providing and fixing 100 mm dia. M.S. pipe embedded in cement conc. Block ( 30 X 30 X 30) 1:2:4 complete as per Arch. Drg. including carriage of material within all leads and lifts. 86.3 Per running metre
92 66 Providing and fixing in position collapsible steel shuters with vertical channels 20 mm X 10 mm X 2 mm and braced with flat iron diagonals 20 mm X 5 mm size with top and bottom rails of T iron 40 mm X 40 mm X 6 mm with 38 mm dia steel pulley complete with bolts and nuts locking arrangements, stoppers, handles, including applying a priming coat of red paint including carriage of material within all leads and lifts. 5.5 Per Square metre
93 67 Providing and fixing round or D shape moulded hand rail of M.S. hollow pipe 50mm diax2mm thick welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely) including carriage of material within all leads and lifts. 81.28 Per running metre
94 68 Providing and fixing door frame shall be fabricated from roll formed of 1.2 mm one point two millimetre thick galvanised steeel ( base IS 513 D ) with zinc of 120 gms/SQM powered coated with pure polyster power upto 50-60 microns thick section should br 105 mm X 60 mm one hundred five into sixty millimetre for single rebate and 125 X 60 mm for double rebate with size 37 mm diametre including fixing in position as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts. 113.91 Per running metre
95 69 Providng and fixing glazed door windows and ventilators of standard rolled steel sections size 55 X 72 mm X 0.58 mm thick for frame 40 mm X 20 mm forty into twenty millimetre for shutter section orient ( 4000) four thousand series galvanised prepainted rolled steel section of NCL SECOOLUR Limited or its Equivalent including wire gauge shutter of section 47 X 20 mm forty seven into twenty millimetre orient ( 4000) four thousand series galvanised prepainted and joints mitred and welded with 16 X 3.15 mm sixteen into three point fifteen millimetre lvgs 10 cm ten centimetre long embedded in cement concrete block 15 cm X 10 cm X 10 cm fifteen into ten into ten centimetre size 1:3:6 ( one cement: three sand : six aggregate ) 20 mm twenty millimetre nominal size or wooden plugs screws or rawl plug and screws fixing clips or with bolts and nuts as per required iron fitting including fixing of glass 5 mm thick gasket glazmg clips and special materials Sash Putty or fixed beeding 12 mm X 12 mm ( Twelve millimetre into twelve millimetre ) thick section and providing and fixing wire gauge shutters using galvanised M.S. wire gauge of 85-G with a wire of 0.56 mm and windows should be provided with grill made of 10 mm diametre M.S. square bar welded to 6 mm X 12 mm M.S. flat distance between bars should not be more than 150 mm centre tatal grill should be fixed to window frame with screws and as per the directions of Engineer-in-Charge including carriage of materials upto all leads and lifts. 206.38 Per Square metre
96 70 Providing and fixing angle iron cupboard frames manufactured from M.S. angle iron section 25mm X 25 mm X 5 mm thickness including hinges jamb, lock jamb, beed and if required angle thrashold of mild steel angle 25 mm x 25 mm welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineer-in-Charge including carriage of materials in all leads and lifts. 45.8 Per Running metre
97 71 PAINTING-AND-POLISHING Painting two coats(excluding priming costs)on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters Enamel paint other than white. Including carriage of materials within all leads, lifts and other incidentals. 356.93 Per Square metre
98 72 Painting two coats(excluding priming costs)on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters Enamel paint other than white. Including carriage of materials within all leads, lifts and other incidentals. 237.96 Per Square metre
99 73 Applying one or more coat of paint based putty made of whiting and POP etc. mixed in required quantity of white enamel paint for application on wood based products after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials within all leads and lifts. 1065.82 Per Square metre
100 74 Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals 1065.82 Per Square metre
101 75 Painting two coats (excluding priming costs) on new wood and wood based surfaces with enamel paint brushing to give an any shade including cleaning the surfaces of all dirt, dust and other foreign matters sand papering and stopping within all leads, lifts of materials and other incidentals.
102 75.01 Synthetic enamel paint other than white. 1065.82 Per Square metre
103 76 Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required including carriage of material within all leads and lifts.with :- 440.86 Per Square metre
104 77 Painting two coats (excluding priming coat)on new concrete / masonry/plastered surfaces with enamel paint of approved brand and manufacture for use on floors to give an even shade,including cleaning of all dirt,dust and other foreign matter and sand papering as required including carriage of material within all leads and lifts with paint other than white. 440.86 Per Square metre
105 78 Polishing with required coats of sprit malamine polish including final coating of malamine polish as per approved sample on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dustand sand papered smooth and including required cpat coat of wood filler.in all leads and lifts including carriage of material and as per the direction of the Engineer-in-Charge. 9.02 Per Square metre
106 79 PLASTERING,POINTING,WHITE-WASHING,COLOUR-WASHING,DISTEMPRING-AND-OTHER-FINISHINGS 6mm (Six milimetre) cement plaster to ceiling in cement mortar 1:3 (One Cement is to Three Sand) in superstructure in all floor level. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals 853.03 Per Square metre
107 80 15mm (Fifteen milimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior / exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) within all leads, lifts of materials and other incidentals. 1295.62 Per Square metre
108 81 15mm (Fifteen milimetres) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior / exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) within all leads, lifts of materials and other incidentals. 707.95 Per Square metre
109 82 Applying two or more coats of Birla white wall care putty or equivalent over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material within all leads and lifts. 2860.64 Per Square metre
110 83 Applying one coat of distemper primer of approved brand and manufacture on wall surfaces after thoroughly brushing the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth including carriage of material within all leads and lifts. 2152.69 Per Square metre
111 84 White washing with lime on undecorated wall/ on ceiling and/ or sloping roof surfaces two coats to give an even shade including thoroughly brooming the surfaces to remove all dirt dust mortar dirt and other foreign matter. 335.49 Per Square metre
112 85 Distempering ( two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface on all floor to give an even shade over and including priming coat of whiting distempring primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign material including preparing the surface even and sand papered smooth priming coat with distempering including carriage of materials within all leads and lifts :- 1387.62 Per square metre
113 86 Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of material within all leads and lifts. 620.57 Per square metre
114 87 MISCELLANEOUS-WORK Providing under layer for plinth protection of 75mm(Seventy five milimetres) thick (un-consolidated) bed of dry brick/stone aggregate 40mm(Forty milimetres) nominal sizes well rammed and consolidated and grouted with fine sand including preparation of ground within all leads, lifts of materials and other incidentals. 60.44 Per Square metre
115 88 Providing and fixing 12 mm thick green chalk board of size 1.50 x 1.20 mtr. with superior quality framming specialy anodized aluminium profile 20 X 15 mm with corner of black plastic shallbe provided. The board surface shall be non-porus ceramic particle on the top green surface for smooth writing with chalk over 11 mm thick particle board which shall have backing materials of galvanised sheet 28 mm thick approximately. The board shall be fixed on the special designed clamp and square clamps with the help of nylon plugs and screws as per site requirement including carriage of material within all leads and lifts. 6 Each
116 89 WATER-SUPPLY-AND-SANITARY-INSTALLATION Providing and fixng to wall ceiling floor galvanised mild steel tubes (Medium grade), tube fittings (Earth work in trenches to be measured and paid for separately) including carriage of materials within all leads and lifts :-
117 89.01 15mm (fifteen millimetre) nominal bore :- 159.2 Per running metre
118 89.02 20 mm (twenty millimetre) nominal bore :- 98.9 Per running metre
119 90 Providing and laying in trenches galvanised mild steel tubes (Medium grade), tube fittings (Earth work in trenches to be measured and paid for separately) including carriage of materials within all leads and lifts :-
120 90.01 25 mm (twenty five millimetre) nominal bore :- 88.2 Per running metre
121 91 Making connection of galvanized steel distribution branch with galvanized mild steel main 20mm to 40mm (Twenty milimetre to Forty milimetre) nominal bore by providing and fixing tee including cutting and threading the pipes complete. Including carriage of materials within all leads, lifts and other incidentals 1 Each
122 92 Providing chases 75mm wide 50mm deep (average size) in walls for conduit pipes and filling the same with cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregate 20mm and down gauge) after the conduit pipe is laid and to finally finished matching to wall surface complet (excluding the cost of pipes ) complete upto all floor levels including carriage of materials in all leads and lifts. 63.6 Per running metre.
123 93 Providing and fixing 550 X 400 mm X 180 mm Hindware make Cat No.1355 & 884 for lab and dark room or equivalent viterous China laboratory sink with C.I. Or M.S. brackets painted white including cutting holes in walls and making good the same but excluding fittings including carriage of material within all leads and lifts. 13 Each
124 94 Providing and fixing 32 mm dia. C.P. brass waste for wash basin or sink including carriage of materials within all leads and lifts. 13 Each
125 95 Providing and fixing 15 mm dia. C.P. brass bib tap ( ESS/JAL) or equivalent with capstan head and wall flange complete including carriage of materials within all leads and lifts. 13 Each
126 96 Providing and fixing brass full way valve with wheel including carriage of materials within all leads and lifts.
127 96.01 15mm dia :- 8 Each
128 96.02 20 mm nominal dia. 3 Each
129 97 Providing and fixing G.I./M.I Union of following sizes (where not included in the items including carriage of materials within all leads and lifts:-15mm nominal bore. 15 Each
130 97.01 20mm nominal bore 2 Each
131 98 Providing and fixing 1000 litres capacity PVC water storage tank of ISI : 12701 marked,G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto a height of 10 metres above ground level including carriage of materials within all leads and lifts :- 4 Each
132 99 Providing and fixing PVC floor trap(finolex) ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials within all leads and lifts
133 99.01 110 mm X 75 mm nominal size :- 13 Each
134 100 Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts :- (i) 75 mm dia. 75.3 Per Running metre
135 100.01 (ii) 150 mm nominal bore including carriage of materials within all leads and lifts. 80.9 Per Running metre
136 101 Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts :- 75 mm dia. 9 Each
137 102 Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts :- 75 mm dia. 10 Each
138 103 Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts :- 75 mm dia. 16 Each
139 103.01 150 mm nominal bore including carriage of materials within all leads and lifts. 20 Each
140 104 Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts :- 75 mm dia. 7 Each
141 105 Providing and fixing PVC offset 45º ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts :- (i) 75 mm dia. 3 Each
142 105.01 150 mm nominal bore including carriage of materials within all leads and lifts. 3 Each
143 106 Providing and fixing PVC double equal branch with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts :- 75 mm dia 4 Each
144 107 Providing and fixing PVC plain double equal branch ISI marked including fixing with approved adhesive etc. Complete :- 75 mm including carriage of materials within all leads and lifts 4 Each
145 108 Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete :- 75 mm including carriage of materials within all leads and lifts 50 Each
146 109 Providing and fixing PVC plain “Y" junction ISI marked including fixing with approved adhesive etc. complete:- 75 mm dia. including carriage of materials within all leads and lifts 4 Each
147 110 Providing and fixing 32 mm dia. PVC waste pipe for wash basin or sink including carriage of material within all leads and lifts. 13 Each
148 111 Providing and fixing 100 mm dia. C.P. grating of superior quality including carriage of material within all leads and lifts. 13 Each
149 112 Constructing brick masonry chamber for underground C..I. Inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (1 cement : 5 sand ) C.I. Cover with frame (light duty ) 355mm x 610mm internal dimensions total weight of cover with frame to be not less than 38kg (weight of cover 23 kg. and weight of frame 15kg) R..C.C top slab with 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size ) foundation concrete 1:5:10 ( 1cement : 5 sand : 10 graded stone aggregate 40mm nominal size) inside plaster 15mm thick with cement mortar 1:3 (1 cement : 3 sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete including carriage of materials within all leads and lifts
150 112.01 Inside dimensions 455 mm x 610 mm x 450 mm deep single pipe line. \n 5 Each
151 112.02 Inside dimensions 500 mm x 700 mm x 450mm deep for pipe line with one or two inlets. 6 Each
152 112.03 Inside dimensions 600 mm x 850 mm x 450 mm deep for pipe line with three or more inlets. 5 Each
153 113 Providing and fixing Reinforced Cement Concrete cover 600 mm internal dia. including carriage of materials within all leads and lifts. 5 Each
154 114 Providing and fixing Reinforced Cement Concrete cover 500 mm internal dia. including carriage of materials within all leads and lifts. 6 Each
155 115 Providing and fixing Reinforced Cement Concrete cover 450 mm internal dia. including carriage of materials within all leads and lifts. 5 Each
156 116 Providing and fixing Water pump ( 1 H.P.) to fift rain water including carriage of materials within all leads and lifts. 1 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2020 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail