| 1 | 1 | Surface dressing of the ground including removing vegitation and in equalities not exceeding 15cm deep and disposal of rubbish lead up to 50 meter and lift up to 1.5 meter. (Labour Element) | | 409 | Sqm |
|---|
| 2 | 2 | Earth work excavation in foundation trenches or drains not exceeding 1.5m in width or 10 sq.m on plan including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. Ordinary Soil. (Labour Element) | | 99 | Cum |
|---|
| 3 | 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc layers not exceeding 20cm in depth consolidating each deposited layers by ramming and watering lead up to 50 mtr and lift up to 1.5 metres. (Labour Element) | | 68 | Cum |
|---|
| 4 | 4 | Filling with Red mud/ Quarry waste/ Debris/Dismantled materials (including loading /unloading /head load/mechanical transportatoin etc) in trenches, pits, plinth, sides of foundations etc in layers not exceeding 20cm in thick and including compacting each layer by rolling/ ramming and watering , all complete as per directions of engineer in charge, lead up to 3 KM. (Labour Element) | | 28 | Cum |
|---|
| 5 | 5 | Providing and laying cement concrete 1:4:8 (1 cement: 4 M- sand: 8 granite chips ) for foundation and plinth. (Labour Element) | | 15 | Cum |
|---|
| 6 | 6 | Providing and laying cement concrete 1:5:10 (1 cement: 5 M-sand: 10 granite chips ) foundation and plinth. (Labour Element) | | 15 | Cum |
|---|
| 7 | 7 | Providing and laying damp proof course 40mm thick with cement concrete 1:2:4 (1cement: 2 M-sand: 4 granite chips 20mm nominal size). (Labour Element) | | 19 | Sqm |
|---|
| 8 | 8 | Reinforced cement concrete work 1:1.5:3 (1 cement: 1.5 M-sand: 3 granite chipps 20mm nominal size) excluding cost of centring, shuttering and reinforcement. a) Foundation footing base of column etc and mass concrete. (Labour Element) | | 25 | Cum |
|---|
| 9 | 9 | Reinforced cement concrete work (wall any thickness) including attached pillasters, buttress, plinth and string course, fillets columns, pillars, peirs, abutments, post and struts etc... up to floor five level excluding cost of centring,shuttering and reinforcement. 1:1.5:3 (1 cement 1.5 M- sand 3 granite chipps 20mm nominal size. (Labour Element) | | 12 | Cum |
|---|
| 10 | 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, shelves chajjas, lintel, bands, plain window sills, staircase and spiral staircase up to floor five level excluding cost of centring,shuttering and reinforcement. 1:1.5:3 (1 cement 1.5 M-sand 3 granite chipps 20mm nominal size. (Labour Element) | | 113 | Cum |
|---|
| 11 | 11 | Providing and fixing up to floor two level precast reinforced cement concrete 1:2:4 (1 cement 2 M sand 4 graded stone aggregate 20mm nimnal size) set in position with cement mortar 1:2 1 cement 2 M sand) and finished smooth with 6mm thick cement plaster 1:3 (1 cement 3 M sand) on exposed surface including centring and shuttering in baffle wall and slab. (Labour Element) | | 2 | Cum |
|---|
| 12 | 12 | Cold twisted steel reinforcement for R.C.C work including bending, binding and placing in position complete. (Labour Element) | | 17232 | Kg |
|---|
| 13 | 13 | Centering and shuttering including strutting propping etc and removal of form work. Foundation footing base of coloum etc and mass concrete. (Full cost) | | 118 | Sqm |
|---|
| 14 | 14 | Centering and shuttering including strutting propping etc and removal of form work. Suspended floors, Roofs, landings, balconies and access platform. (Full cost) | | 660 | Sqm |
|---|
| 15 | 15 | Centering and shuttering including strutting propping etc and removal of form work. Lintel, beams, plinth beams, girder, bressummers and cantilivers. (Full cost) | | 421 | Sqm |
|---|
| 16 | 16 | Centering and shuttering including strutting propping etc and removal of form work. Column, piller,piers, abutments, posts and struts. (Full cost) | | 161 | Sqm |
|---|
| 17 | 17 | Centering and shuttering including strutting propping etc and removal of form work. Spiral staircases (including landing). (Full cost) | | 37 | Sqm |
|---|
| 18 | 18 | Cement concrete block (machine moulded) masonry in foundation and plinth in cement mortar 1:6 (1 cement: 6 M sand) with blocks of size 40cmx20cmx15cm. (Labour Element) | | 32 | Cum |
|---|
| 19 | 19 | Cement concrete block (machine moulded) masonry in superstructure above plinth level in cement mortar 1:6 (1 cement: 6 M sand) with blocks of size 40cmx20cmx15cm. (Labour Element) | | 116 | Cum |
|---|
| 20 | 20 | Half brick with modular bricks of class designation in foundation and plinth in C M 1:4 (1 cement: 4 M sand). (Labour Element) | | 1 | Sqm |
|---|
| 21 | 21 | Half brick work in superstucture above plinth level upto floor five level in cement mortar (1 cement: 4 M sand). (Labour Element) | | 169 | Sqm |
|---|
| 22 | 22 | Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed position second class teak wood. (Full cost) | | 0.9 | Cum |
|---|
| 23 | 23 | Providing and fixing Flush door shutters confirming to IS:2202 (part.I) decorative type, core of block board construction frame of first class hard wood and well matched first class teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. Duro/Marino/Orient/Kenwood(Full cost) | | 42 | Sqm |
|---|
| 24 | 24 | Providing 40x5 mm iron hold fast 40cm long including fixing to frames with 10 mm dia bolts, nuts, wooden plugs and embedding in cement concrete block of size 30x10x15 cm of mix 1:3:6 ( 1 cement, 3 M-sand 6 graded stone aggregate of 20mm nominal size). (Full cost) | | 132 | Each |
|---|
| 25 | 25 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer- in-charge. (Glazing and panelling to be paid for separately): For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). (Full cost) | | 401 | Kg |
|---|
| 26 | 26 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer- in-charge. (Glazing and panelling to be paid for separately): For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). (Full cost) | | 703 | Kg |
|---|
| 27 | 27 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness. (Full cost) | | 3 | Sqm |
|---|
| 28 | 27.1 | With float glass panes of 5.5 mm thickness | | 93 | Sqm |
|---|
| 29 | 28 | Providing and fixing 100mm Bright finished brass mortice latch and lock with 6 levers and a pair of lever handles with necessary screws. Harrison/Godrej (Full Cost) | | 22 | Each |
|---|
| 30 | 29 | Providing and fixing brass tower bolt (barral type) with necessary screws etc complete. (Full Cost) 250 mm x 10mm | | 44 | Each |
|---|
| 31 | 30 | Providing and fixing brass handle with necessary screws etc complete. (Full Cost) 100 mm | | 44 | Each |
|---|
| 32 | 31 | Providing and fixing Bright finished brass door stopper with rubber cusion & necessary screws. (Full Cost) | | 22 | Each |
|---|
| 33 | 32 | Providing and fixing Aluminium curtain rods with Aluminium brackets:20 mm dia (heavy type). (Full Cost) | | 53 | Mtr |
|---|
| 34 | 33 | Providing and fixing aluminium casement windows fastener of required length or aluminium windows with necessary screws etc. complete. Anodized (AC 15) aluminium. (Full Cost) | | 38 | Each |
|---|
| 35 | 34 | Providing and fixing to existing door frames. 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels confirming to TADS 6: 1993 and / or IS: 14856 - 2000 including fixing to frames. (Full Cost) | | 13 | Sqm |
|---|
| 36 | 35 | Providing and fixing Fiber Glass Reinforced plastic (FRP). Door Frames of cross-section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness. The laminate shall be molded with fire resistant grade unsaturated polyester resin and chopped mat. Doorframe laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibreglass from all sides. MS stay shall be provided at the bottom to steady the frame. (Full Cost) | | 40 | Mtr |
|---|
| 37 | 36 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. (Full Cost) | | 36 | Each |
|---|
| 38 | 37 | Providing and fixing stainless steel (Grade 316) railing made of Hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size,on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (Full Cost) | | 1396 | Kg |
|---|
| 39 | 38 | Providing and fixing non-skid ceramic floor tiles of size 300x300mm (thickness to be specified by the manufacture) of first quality confirming to IS:15622 of approved make,in colours such as White, ivory, Grey, Fume red brown, laid on 20 mm thick cement mortar 1:4 (1cement: 4 Plastering sand) and joining with white cement and matching pigment etc. complete. Kajaria/Somany/Johnson/Oasis. (Department shall provide cement. Contractor has to bring tiles and Plastering Sand) (Full Cost) | | 101 | Sqm |
|---|
| 40 | 39 | Providing and fixing 1st quality ceramic glazed wall tiles confirming to IS:15622 ( thickness to be specified by the manufacture ) of approved make,in all colours,shades except burgundy ,bottle green,black of any size as approved by engineer-in-charge in skirting,risers of steps and dado over 12mm thick cement mortar 1:3 (1cement: 3 Plastering sand) and joining with grey cement slurry @3.3 kg per sqm,including pointing in white cement mixed with pigment of matching shade complete. Kajaria/Somany/Johnson/Oasis. (Department shall provide cement. Contractor has to bring tiles and Plastering Sand) (Full Cost) | | 123 | Sqm |
|---|
| 41 | 40 | Providing and laying vitrified floor tiles (premium quality ) in diffren sizes ( thickness to be specified by the manufacture ) with water absorbtion less than 0.08 % and confirming to IS: 15622 of approved make in all coulers and shades, laid 20mm thick cement mortar 1:4 (1 cement: 4 Plastering sand) including grouting the joints with white cement and matching pigments etc.. complete. (flooring) Size of Tile 800x800 mm. Kajaria/ Somany/ Johnson/Oasis. (Department shall provide cement. Contractor has to bring tiles and Plastering Sand) (Full Cost) | | 213 | Sqm |
|---|
| 42 | 41 | Providing and laying Vitrified tiles in different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3(1cement, 3 Plastering sand), including grouting the joints with white cement and matching pigments etc.complete. Johnson/Khajaria/Bell or equivalent. Size of Tile 800x800 mm. Kajaria/Somany/Johnson/ Oasis. (Department shall provide cement. Contractor has to bring tiles and Plastering Sand) (Full Cost) | | 19 | Sqm |
|---|
| 43 | 42 | Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen plat forms, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1cement: 4 Plastering sand) with joints treated with white cement, mixed with matching pigment,epoxy touchups, including rubbing,curing moulding and polishing to edge to give high gloss finish etc.complete at all levels. Granite of any clour and shade. Area of slab up to 0.50 Sqm. (Department shall provide cement. Contractor has to bring granite and Plastering Sand) (Full Cost) | | 135 | Sqm |
|---|
| 44 | 43 | Cement concrete flooring 1:2:4 (1 cement: 2 M.sand: 4 stone aggregate) finished with a floating coat of neat cement including cement slurry, rounding of edges and strips etc. But excluding the cost of nosing the steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. (Labour Element) | | 9 | Sqm |
|---|
| 45 | 44 | Neat cement punning. (Labour Element) | | 22 | Sqm |
|---|
| 46 | 45 | 6mm thick cement plaster to ceiling CM 1:3 (1 cement: 3 Plastering sand). (Department shall provide cement. Contractor has to bring Plastering Sand) (Full cost) | | 1031 | Sqm |
|---|
| 47 | 46 | 12mm thick cement plaster CM 1:6 (1 cement: 6 Plastering sand). (Department shall provide cement. Contractor has to bring Plastering Sand) (Full cost) | | 742 | Sqm |
|---|
| 48 | 47 | 15mm thick cement plaster CM 1:6 (1 cement: 6 Plastering sand) on the rough side of single or half brick wall. (Department shall provide cement. Contractor has to bring Plastering Sand) (Full cost) | | 958 | Sqm |
|---|
| 49 | 48 | Providing and applying wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. Birla White/JK.White (Full Cost) | | 2707 | Sqm |
|---|
| 50 | 49 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. Water thinnable cement primer. Nerolac/Asian/Berger/ICI (Full Cost) | | 2707 | Sqm |
|---|
| 51 | 50 | Finishing with Deluxe Multi surface paint system for interiors using primer as per manufactures specifications two or more coats applied on walls @1.25ltr/10 sqm) over including priming coat of special primer applied @ 0.75 ltr/10 sqm. For Interior Wall. Nerolac/Asian/Berger/ICI (Full Cost) | | 1989 | Sqm |
|---|
| 52 | 51 | Finishing wall with Acrylic smooth exterior paint of required shade on new work (two or more coats applied @1.67ltr/10sqm) over including priming coat of exterior primer applied @ 2.20 kg/10 sqm. Asian Paints-Apex Ultima/Berger- weather coat/ICI- weather shield max (Full Cost) | | 718 | Sqm |
|---|
| 53 | 52 | French spirit polishing on a new work (two or more coats) including a coat of wood filler with ready mixed polish of approved brand and manufacture. (Sheenlac/Skylark/Asian Paints) (Full Cost) | | 49 | Sqm |
|---|
| 54 | 53 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,). 20 mm nominal bore. (Class I, SDR 11). Astral/ Ashirvad/ Finolax (Full Cost) | | 30 | Mtr |
|---|
| 55 | 54 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External work). 20 mm nominal bore. (Class I, SDR 11). Astral/ Ashirvad/ Finolax (Full Cost) | | 30 | Mtr |
|---|
| 56 | 54.1 | 32 mm nominal bore | | 30 | Mtr |
|---|
| 57 | 55 | Providing and fixing CP brass bibcock of approved quality and manufacture complete. 15 mm nominal bore. Jaquar/ Kohler/Grohe. (Full cost) | | 8 | Each |
|---|
| 58 | 55.1 | 20 mm nominal bore | | 8 | Each |
|---|
| 59 | 56 | Providing and fixing CP brass stopcock of approved quality and manufacture complete. 15 mm nominal bore. Jaquar/Kohler/ Grohe. (Full cost) | | 16 | Each |
|---|
| 60 | 56.1 | 20 mm nominal bore | | 3 | Each |
|---|
| 61 | 57 | Providing and fixing CP brass Sink cock of approved quality and manufacture complete. 20 mm. Jaquar/Kohler/Grohe. (Full cost) | | 2 | Each |
|---|
| 62 | 58 | Providing and fixing white vitrous China water closet Pedestal pan (European) type WC pans with white plastic seat and lid and rubber buffers, 15 white vitrous China low level flushing system of approved make with fittings and brackets 40mm flush bend, 20mm over flow pipe with complete including cutting and making good the walls and floors where required. White EWC pan with plastic seat and lid. (Cera/Hindware/Parryware/ Jaquar). (Full Cost) | | 7 | Each |
|---|
| 63 | 59 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. | | 1 | Each |
|---|
| 64 | 60 | Providing anf fixing white vitrous China wash basin with RS or CI brackets painted white, 15mm C.P bras pillar tap and C.P brass chain and rubber plug 32mm C,P. brass waste of standrad pattern 32mm diametre and waste pipe complete including cutting and making good the walls and floors where required. white vitrous china flat back wash basin 550x400mm with one 15mm C.P brass piller tap. (Cera/Hindware/Parryware/ Jaquar). (Full Cost) | | 10 | Each |
|---|
| 65 | 61 | Providing and fixing Stainless steel A ISI 304 ( 18/8) kitchen sink asper IS 13983 with CI brackets stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls where required. Kitchen sink with drain board 510x1040 mm bowl depth 250 mm. (Neelkanth/ Nirali/ Jayna/ Prayag). (Full Cost) | | 1 | Each |
|---|
| 66 | 62 | Providing anf fixing 600x450mm mirror of superior glass (approved quality) complete with 6mm thick asbestose sheet ground fixed to wooden cleats with necessary screws and washers. (Saintgobain/Modi guard/AIS/Pilkington). (Full Cost) | | 10 | Each |
|---|
| 67 | 63 | Providing and fixing GM Full way wheel valve of approved quality and manufacture complete. (a) 32 mm nominal bore. (Zoloto/Leader/Orient) (Full Cost) | | 3 | Each |
|---|
| 68 | 64 | Providing and fixing C.P. shower rose with 15 to 20mm intlet, 100 mm dia. Jaquar/ Kohler/Grohe. (Full cost) | | 8 | Each |
|---|
| 69 | 65 | Providing and fixing health faucet of approved quality and manufacture complete. Jaquar/ Kohler/Grohe. (Full cost) | | 8 | Each |
|---|
| 70 | 66 | Providing and placing on terrace at floor level) polythene water storage tankISI:12701 marked with cover and suitable locking arrangenebt and making necessary holes for inlet, outlet and over flow pipe but without fittings and the base support for tank.(a) 500 Litre capacity. (Sintex/Ocean/Aquatech) (Full cost) | | 1 | Each |
|---|
| 71 | 67 | Providing and fixing towel rail brackets fixed to wooden cleat with scerws and washers. 600 x 20 mm CP brass towel rail with brackets 600mm long towel rail brackets with total length of 645mm width 78mm and effective height of 88 mm weighinig not less than 190 gms. Jaquar/ Kohler/Grohe. (Full cost) | | 11 | Each |
|---|
| 72 | 68 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. Jaquar/ Kohler/Grohe. (Full cost) | | 10 | Each |
|---|
| 73 | 69 | Providing and fixing nominal guage PVC Pipe of approved quality complete with special flang compression type fittings including trenching and re filling etc. External work. 110mm diametre. (6Kg/ cm2)(Prince/Supreme/Finolex) (Full Cost) | | 30 | Mtr |
|---|
| 74 | 69.1 | 63mm diametre | | 20 | Mtr |
|---|
| 75 | 69.2 | 90mm diametre | | 30 | Mtr |
|---|
| 76 | 70 | Providing and fixing 100 mm PVC grating with gully trap. (6Kg/ cm2)(Prince/Supreme/Finolex) (Full Cost) | | 8 | Each |
|---|
| 77 | 71 | Providing and fixing on wall face PVC soil waste and vent pipe 75mm dia pipes. (6Kg/cm2)(Prince/Supreme/Finolex) (Full Cost) | | 12 | Mtr |
|---|
| 78 | 72 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Department shall provide M.Sand. Contractor has to bring CC Interlocking paver block) (Full Cost) | | 18 | Sqm |
|---|
| 79 | 73 | Steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished welded type tubes. (Full Cost) | | 269 | Kg |
|---|
| 80 | 74 | Providing & fixing UV stabilised 3mm thick fiberglass reinforced plastic sheet (Poly Carbonate Plain sheet) roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. Palram.GE.Sepitalia/Dan Pal.GE. Lexan (Full Cost) | | 15 | Sqm |
|---|
| 81 | 75 | Painting steel work with Deluxe Multi surface paint to give an even shade. Two or more coats applied on @ 0.90ltr/10 sqm) over under coat of primer applied @ 0.80 ltr/10 sqm of approved and manufacture. Nerolac/Asian/Berger/ICI (Full Cost) | | 8 | Sqm |
|---|
| 82 | 76 | Providing, laying and jointing PVC pipes grade 'A' with solvent cement including cutting jointing etc complete. 110 mm diameter pipes. (6Kg/cm2) (Prince/Supreme/Finolex) (Full Cost) | | 33 | Mtr |
|---|
| 83 | 77 | Providing and laying cement concrete 1:5:10 (1 cement 5 M sand 10 graded stone aggregate 40mm nominal size) around the pipe 15cm thick as per standard design excluding cost of centring, shuttering and reinforcement. 100 mm dia. (Full Cost) | | 3 | Mtr |
|---|
| 84 | 78 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying: a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 Kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 Kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Weber/Fosroc/Pidilite/Cico (Full Cost) | | 27 | Sqm |
|---|
| 85 | 79 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 Kg/sqm. b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 Kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 Kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paid separately). For the purpose of measurement the entire treated surface will be measured. Weber/Fosroc/Pidilite/Cico (Full Cost) | | 153 | Sqm |
|---|
