Border Security Force-BSF has published Renovation And Up Gradation Of Ts Jawan Barrack At Bop Tesua 2 Nos Mahisasan 2 Nos Barapunji Madanpur Balia Bilbari Fulkandi 2 Nos Sonatala 2 Nos And Toilet Block Balia Of 134 Bn Bsf Under Shq Bsf Silchar Do. Submission Date for this Tender is 24-09-2020. Barrack Tenders in AOR OF 134 BN BSF Assam. Bidders can get complete Tender details and download the document.
| Name of Work: Renovation /Up-gradation of TS Jawan Barrack (SH : Flooring , replacement of CGS Sheet ,False celling ,Door & Window etc ) at BOP Tesua-02 nos, Mahisasan-02 nos, Barapunji, Madanpur, Balia, Bilbari, Fulkandi-02 nos, Sonatala- 02 nos and Toilet block at BOP Balia of 134 BN BSF under SHQ BSF Silchar | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing and fixing plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately) : white face insulating board 12 mm thick | BI01010001010000000000000515BI0100001113 | 1093.92 | sqm |
| 2 | 2 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | BI01010001010000000000000515BI0100001114 | 1957.26 | sqm |
| 3 | 3 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) | BI01010001010000000000000515BI0100001115 | 180 | Mtr |
| 4 | 4 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter .(600 mm over all girth) | BI01010001010000000000000515BI0100001116 | 180 | Mtr |
| 5 | 5 | Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinanble priming coat to give an even shade | BI01010001010000000000000515BI0100001117 | 1346.88 | sqm |
| 6 | 6 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet | BI01010001010000000000000515BI0100001118 | 1887.06 | sqm |
| 7 | 7 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. | BI01010001010000000000000515BI0100001119 | 966.72 | sqm |
| 8 | 8 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour Two coats | BI01010001010000000000000515BI0100001120 | 798.61 | sqm |
| 9 | 9 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer | BI01010001010000000000000515BI0100001121 | 2145.49 | sqm |
| 10 | 10 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. | BI01010001010000000000000515BI0100001122 | 47.88 | sqm |
| 11 | 11 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm | BI01010001010000000000000515BI0100001123 | 24 | Nos |
| 12 | 12 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10 mm | BI01010001010000000000000515BI0100001124 | 48 | Nos |
| 13 | 13 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm | BI01010001010000000000000515BI0100001125 | 24 | Nos |
| 14 | 14 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). | BI01010001010000000000000515BI0100001126 | 493 | Kg |
| 15 | 15 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001127 | 370.8 | Kg |
| 16 | 16 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | BI01010001010000000000000515BI0100001128 | 4350.24 | Kg |
| 17 | 17 | Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes | BI01010001010000000000000515BI0100001129 | 200 | Kg |
| 18 | 18 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work | BI01010001010000000000000515BI0100001130 | 71 | sqm |
| 19 | 19 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001131 | 350 | sqm |
| 20 | 20 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate | BI01010001010000000000000515BI0100001132 | 557.28 | sqm |
| 21 | 21 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | BI01010001010000000000000515BI0100001133 | 315 | sqm |
| 22 | 22 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | BI01010001010000000000000515BI0100001134 | 230.4 | sqm |
| 23 | 23 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 5.50 mm thickness | BI01010001010000000000000515BI0100001135 | 124.2 | sqm |
| 24 | 24 | Providing and fixing Wire gauge in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) : stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both direction. | BI01010001010000000000000515BI0100001136 | 62.1 | sqm |
| 25 | 25 | Providing and fixing Sliding arrangement locking system of approved quality in aluminium sliding window including fixing with necessary screws complete as per direction of enginner-in-charge. | BI01010001010000000000000515BI0100001137 | 120 | sqm |
| 26 | 26 | Providing and fixing Stainless Steel Hanger complete with brackets fixed to Plastic cleats with CP brass screws with concealed fitting arrangement of approved quality and colour as per direction on engineer-in-charge: (400 to 450) mm long Hanger | BI01010001010000000000000515BI0100001138 | 60 | sqm |
| 27 | 27 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades xcept burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001139 | 49.79 | sqm |
| 28 | 28 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | BI01010001010000000000000515BI0100001140 | 20.54 | sqm |
| 29 | 29 | Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001141 | 19.4 | sqm |
| 30 | 30 | Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge. Non decorative finish | BI01010001010000000000000515BI0100001142 | 7.88 | sqm |
| 31 | 31 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm | BI01010001010000000000000515BI0100001143 | 5 | sqm |
| 32 | 32 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm | BI01010001010000000000000515BI0100001144 | 5 | sqm |
| 33 | 33 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm | BI01010001010000000000000515BI0100001145 | 5 | sqm |
| 34 | 34 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | BI01010001010000000000000515BI0100001146 | 2 | sqm |
| 35 | 35 | Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729 | BI01010001010000000000000515BI0100001147 | 138 | sqm |
| 36 | 36 | Providing and filling the joints with spun yarn, cement slurry and cementmortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 100 mm dia pipe | BI01010001010000000000000515BI0100001148 | 4 | sqm |
| 37 | 37 | Providing and fixing single equal plain junction of required degree : 100x100x100 mm Sand cast iron S&S as per IS - 1729 | BI01010001010000000000000515BI0100001149 | 2 | sqm |
| 38 | 38 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore | BI01010001010000000000000515BI0100001150 | 10 | sqm |
| 39 | 39 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 25 mm dia nominal bore | BI01010001010000000000000515BI0100001151 | 10 | sqm |
| 40 | 40 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore. | BI01010001010000000000000515BI0100001152 | 4 | sqm |
| 41 | 41 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore | BI01010001010000000000000515BI0100001153 | 2 | sqm |
| 42 | 42 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter | BI01010001010000000000000515BI0100001154 | 2 | kg |
| 43 | 43 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore | BI01010001010000000000000515BI0100001155 | 1 | kg |
| 44 | 44 | Cleaning of sewage sludge from septic tank & manholes (any size) i/c the cost of same in trenches with covering the trench with earth at a distance not exceeding 50 mtr. The thickness of earth cover of sludge filled in trench shall not be less than 30 cm as per direction of Engineer-in-charge. The cost of all operations i.e. trenching removing of sludge from septic tanks/manholes, filling of sludge in trenches and covering with earth etc. shall be included in the rate. | BI01010001010000000000000515BI0100001156 | 25 | sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
