}

Provn Of Flame Proof Lighting , Fire Alarm System Provn Of Flame Proof Lighting Fire Alarm System With Certain B/R Works In Technical Building At Vsn Gandhinagar, GANDHINAGAR-Gujarat

Military Engineer Services-MES has published Provn Of Flame Proof Lighting , Fire Alarm System Provn Of Flame Proof Lighting Fire Alarm System With Certain B/R Works In Technical Building At Vsn Gandhinagar. Submission Date for this Tender is 29-09-2020. Alarm Systems Tenders in GANDHINAGAR Gujarat. Bidders can get complete Tender details and download the document.




Tender Notice

25477476
Provn Of Flame Proof Lighting , Fire Alarm System Provn Of Flame Proof Lighting Fire Alarm System With Certain B/R Works In Technical Building At Vsn Gandhinagar
Open Tender
Indian
Gujarat
GANDHINAGAR
29-09-2020

Tender Details

Provn Of Flame Proof Lighting , Fire Alarm System Provn Of Flame Proof Lighting Fire Alarm System With Certain B/R Works In Technical Building At Vsn Gandhinagar

Key Value

Document Fees
INR 500 /-
EMD
INR 95000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: PROVISION OF FLAME PROOF LIGHTING, FIRE ALARM SYSTEM WITH CERTAIN B/R WORKS IN TECHNICAL BUILDING AT VSN GANDHINAGAR
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Demolition of cement concrete of any description in any position not otherwise specifically provided all as specified and as directed by Engr- in- Charge 2 CUM
2 2 Removing building materials etc, to a distance of 100m or under, beyond the lead included in the item, including loading, unloading and stacking at the destination as directed by Engr- in- Charge 8 PER LOAD
3 3 Excavating over areas, n exc1.5 m deep and getting out in soft/loose soil. 130 CUM
4 4 Excavating in trenchs not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and not exc 10 Sqm on plan in any type of soil and getting out all as specified. 3.04 CUM
5 5 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil all as specified 1.7 CUM
6 6 Excavating in post holes each n exc. 0.50 cum getting out in soft/loose soil and removing surplus soil to a distance n exc 50m & making good surface complete all as specified. 203 EACH
7 7 Removal of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point all as specified. 202 CUM
8 8 M&L Hardcore of broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface as directed by Engr in Charge 57.5 CUM
9 9 M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled & rammed including watering complete all as specifed and as directed by Engr in Charge 15 CUM
10 10 M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate all as specified and as directed by Engr- in- Charge 4.54 CUM
11 11 M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate all as specified and as directed by Engr- in- Charge 11.03 CUM
12 12 M&L Cement concrete 1:2:4 type B2 using 40 mm graded stone aggregate all as specified and as directed by Engr- in- Charge 2 CUM
13 13 M&L PCC 1;3:6 type C-2 using 40 mm graded stone aggregate as in fencing post complete all as specifed and as directed by Engr- in- Charge 31.5 CUM
14 14 M&L PCC (1:2:4) type B1, using 20mm graded stone aggregate as in coping including necessary form work etc complete all as specified and as and as directed by Engr- in- Charge 10.28 CUM
15 15 M&L Precast cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregates) as in kerb stone, factory made and as approved by GE with plain fair faces including chamfering,weathering etc.complete with joint to match in CM 1:6 all as specified and as directed by Engr- in- Charge 2.28 CUM
16 16 M&L RCC M-25 using 20 mm graded aggregate in walls as in column,post, struts etc complete all as specified and as directed by Engr- in- Charge 7 CUM
17 17 Cutting openings, through brick walls built in cement mortar or cement lime mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing & removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc., to store and rubbish not exc.50m all as specified and as directed by Engr- in- Charge 2 CUM
18 18 M&L Forming jambs, etc., to openings, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete New work built in CM(1:4) all as specified and as directed by Engr- in- Charge 6 SQM
19 19 M&L Making good under cills or over arches, lintels and bressummers, including all pinning when necessary new work built in CM(1:4) all as specified and as directed by Engr- in- Charge 6 SQM
20 20 M&L Formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter flat rough finished surfaces of concrete complete. 3.6 SQM
21 21 M&L Formwork to sides of pillars ,post struss,piers column and stanchions rectangle/ square in shape,for rough finished surface of concrete complete. 14.4 SQM
22 22 M&L 1st class hardwood newel posts, wrought, with square, rounded, chamfered or stop, chamfered edges, mortices for strings and handrails, sectional area exc. 100 mm x 100 mm and fixed complete all as specified and as directed by Engr- in- Charge 0.9 CUM
23 23 S&F Mild steel works for posts and struts in fencing incl cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iorn fillets (for securing wire mesh etc) including all necessary drilling , bolting or welding / riveting, etc and similar work conforming to Fe-290 Gde -E-165 complete all as specified 2115 KG
24 24 M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified 557.5 KG
25 25 M&L Mild steel screw bolts with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut , but length of bolt exc 5 cm and n exc 10 cm long and diameter of neck 10 mm complete all as specified 54 KG
26 26 M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and n exc 15cm long complete all as specified 10 KG
27 27 S&F Mild steel, plain, black 2 mm thick sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angle etc. as required all as specified and directed. 25 SQM
28 28 M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips 659 KG
29 29 M&L Mild steel TMT bars 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips 100 KG
30 30 M&L Mild steel round bars 6 to 8 mm dia (Fe-410-W (Gde.E-250) quality-A orFe 290 (Gde -E-165), cut to length bent to shape required, including crancking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securing with clip quality complete 463.5 KG
31 31 S&F Rolled mild steel Roof trusses (framed), trussed purlins crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. GDE Fe410-W or Gde- 250 quality A complete all as specified 3165 KG
32 32 S&F Framed work as in doors or gates of angle (50X50X6) or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel heeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410-E250 quality B complete all as specified 232.5 KG
33 33 Fixing only Chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc. including provision of binding wire 652.5 SQM
34 34 S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete as in repair all as specified 10.94 100 RM
35 35 S&F 1.25 mm thick Steel rolling shutters push pull or manual , with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete all as specified 4 SQM
36 36 S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinge type B-21 100mm long (2 Nos.) suitable handle (1 No.) complete all as specified 12.5 SQM
37 37 S &F factory made riflle rack stainless steel 4mm dia chain suitable for locking the rifles covered with suitably stiched rexin cover including locking arrange for each rack all as specified and as directed by Engineer- in -Charge. 100 RM
38 38 Supply only Chain Link Fencing MS galvanised fencing any size or type 1440 KG
39 39 S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr in Charge 160 SQM
40 40 M&L Machine pressed precast conctete interlocking paver block prepainted with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including 50mm thick sand cushioning complete all as specified and as directed 598 SQM
41 41 M&L 100mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in floor complete all as specified 438 SQM
42 42 M&L Rendering 15mm thick on fair faces brick surfaces in cement mortar 1 : 4 finished even and smooth without using extra cement . 48 SQM
43 43 M&L Preparation of new wall surfaces and applying two coats of distemper oil emulsion, white or tinted over a coat of primer complete all as specified 6 SQM
44 44 M&L Preparation of new wall surfaces and applying two coats of cement base paint, white or tinted over a coat of primer complete all as specified 6 SQM
45 45 S&F 5.50mm thick sheet glass ordinary quality & glazing with glazing clip and EPDM rubber around aluminium frame in square exc 0.5 Sqm in each pane all as per specified and directed 8 SQM
46 46 M&L Preparation of new surface of steel of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primerall as specified and as directed. 318.3 SQM
47 47 M&L Preparation of new surface of steel of any description n,exc 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primerall as specified and as directed. 117 10\nRM
48 48 M&L Preparation of new brick, stone, concrete, asbestos cement or plaster surface of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified 90 SQM
49 49 Supplying, installing, testing and commissioning of MS 'C' Class pipe with fixing support like angle, channel, tie rod, patti clamps, nut & bolts, washer etc, tee, reducrer elbow etc, one coat of primer and two cote of enamal red paints complete for the following sizes all as directed by Engr in Charge \nNote : Supports will be measured and paid seperately
50 49.01 (a) 25 mm dia 36 RM
51 49.02 (b) 50 mm dia 30 RM
52 49.03 (c) 80 mm dia 36 RM
53 50 Supply, installing, testing and commissioning of 57deg pendent type brass sprinkler with coupling and all necessary fittings complete all as specified and as directed . 20 EACH
54 51 Supply, installing, testing and commissioning of heavy duty PN1.6 CI butterfly valve of 50 mm dia with MS flange, nut, bolts gasket etc complete all as specified and as directed . 3 EACH
55 52 Supply, installing, testing and commissioning of heavy duty PN1.6 CI butterfly valve of 80 mm dia with both side flange, nut, bolts gasket etc complete all as specified and as directed . 1 EACH
56 53 M&L Flame proof Light/Fan point wiring with 1.5 Sqmm (Nominal area) PVC insulated unsheathed cable FRLS grade with copper conductor single core multi stranded 1100V grade, ISI marked (IS 694), for phase, Neutral and earth continuity , drawn through in including not less than 20 mm dia surface stove enamelled steel conduit, heavy grade, ISI marked , including conduit accessories and connecting the earth wire to common earth dolly all as specified and directed.\nNote :- The rates quoted for this shall b deemed to be inclusive of taking down old Conventional light fittings, switches, sockets, ceiling fans, exhaust fans etc alongwith all fittings and fixtures and deposiing in MES Store yard as directed by the Engr-in-Charge. 74 point
57 54 S & F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V all as specified and directed. 24 EACH
58 55 Supply and fix Fluorescent LED tube light fitting. 2x36W/40W flameproof type made of aluminium alloy LM6, with electronic ballast, bipin holders, connector block, etc. complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed. 20 EACH
59 56 S & F Flame proof wall mounded fan of size 18'' , 1440 RPM, 230V including connecting and fixing arrangement all as specified and directed.\n 4 EACH
60 57 S & F Flame proof Ceiling fan of size 1200mm sweep, 1440 RPM, 230V including connecting and fixing arrangement all as specified and directed.\n 5 EACH
61 58 S&F flame proof MCB SPN DB 6way 230 volts IP - 65 , with the following MCB's , universal mounting with 200 A copper bus bar , neutral link, earth link, complete comprising of the following:-\na) MCB SPN 32A, C curve - 01 No\nb) MCB SP 6-32 A, C curve - 04 Nos\n 1 EACH
62 59 Supply and fixing sheet metal enclosure, single phase, double door DB, flush to wall mounting for MCB fitted with 200 Amp rated bus bars and neutral links ( without MCB's) 8 ways TPN complete all as directed by Engineer-in-Charge. 1 EACH
63 60 M&L Chemical Earthing complete with copper earth plate electrode 900mm x 600mm x 5mm thick buried directly in ground vertically to a depth not less than 4m below normal ground level with top edge of the earth plate at a depth not less than 2.25m below ground level connected to and including copper strip of size 32 x 6 mm by means of nuts, bolts, check nuts and washer etc, made of copper and connected to test point and earth dolly all as shown in electrical plate No. 03 SSR Part-I 2009 and specified or indicated including providing charcoal dust 1000 Kgs, commen salt 500 Kg, magnesium Sulphate 150 Kgs and all around the plate 15 CM depth RCC 50 mm thick in cement and wide and upto 650 mm height in continuous layers, balance pit will be filled with vegetable soil upto ground level including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square meter) with cast iron frame, funnel with wire mesh, 80mm bore light grade GI watering pipe, lugs, 80mm bore light grade GI protection pipe up to 7.5 metre etc. complete all as specified and directed.\nNote:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. \n(ii) Item includes the cost of 7.5 metre Copper Earth Strip.\n(iii) On testing, after completion, if the earth resistance less than 0.5 Ohms is not obtained, earthing will be regenerated at no extra cost till the desired earth resistance is obtained.\n 1 EACH
64 61 M&L Boring of holes under road, pavement and hard standing by trenchless technology using ultra sound technique and necessary machine for insertion of HDPE pipe of 150mm to 200mm outer dia and 0.4mpa working pressure all as directed. all as specified and directed Note :- (i) HDPE pipe shall be measured and paid separately under relevant items of this schedule. (ii) Depth will not be less than 1m below the road 40 RM
65 62 Supply and laying pipe HDPE type having pressure rating 6 Kgf/cm2, 160mm dia inserting in horizontal bore created vide item above for protection of cable complete all as specified and as directed 40 RM
66 63 S&F Loop addressable fire alarm panel with 2 Nos of 12V, 7 Ah battery for panel power backup complete all as specified and as directed 1 EACH
67 64 S&F Active repeater panel complete in all respact and testing complete all as specified and as directed complete all as specified and as directed. 2 EACH
68 65 S&F Addressable smoke detector with base complete in all respact and testing complete all as specified and as directed. 35 EACH
69 66 Supply,Installation,testing and commissioning of XP95 intrinsically safe (IS) detectors are a development of the well established analogue addressable smoke detector complete all as specified and as directed 10 EACH
70 67 Supply,Installation,testing and commissioning of loop powered manual call point, resetable operating element, easy access, front reset mechanism E-Z fit connector system for installation Ergonomic reset key EN 54-11 and EN 54-17 certified 170 digree, viewable LED continuity link for cable insulation testing suitable for semi flush or surface mounting complete all as specified and as directed . 1 EACH
71 68 S&F Protocol transformer for intrisically safe detectors complete in all respect and testing complete all as specified and as directed . 2 EACH
72 69 S&F Zennar barrier for intrisically safe detectors with all respect and testing complete all as specified and as directed . 2 EACH
73 70 S&F Addressable sounder with flasher complete in all respect and testing complete all as specified and as directed . 1 EACH
74 71 S&F Fault isolator module complete in all respect and testing complete all as specified and as directed . 1 EACH
75 72 S&F 1.5 sq mm 2 core copper armoured FRLS cable as per suitable for fire alarm , laying complete and testing complete including provision of rigid steel conduit pipe 20mm all as specified and as directed . 1500 RM
76 73 Supply, install and commissioning of inverter type split AC' unit of capacity 1.5 Ton & BEE 5 Star rating, EER 3.2, indoor and outdoor units complete,single phase with cordless remote control unit, inbuilt air ionizer,anti-bacterial filter,micro dust protection filter(3M),Gold fin condenser,auto clean,energy saving mode,low referegent detection,monsoon comfort and referegent R-32, plasma filter for better indoor air quality with Eco friendly Non - CFC gas, including necessary mounting brackets & copper and drain pipe as required, complete all as directed by Engineer-in-Charge. 4 EACH
77 74 M&L Submain wiring with 2 runs of 4 sqmm PVC insulated unsheathed copper cable multistranded 1100V, FRLS grade with 20 mm dia Steel conduit and conduit accessories(Concealed in walls) etc and one run of PVC insulated 4 sqmm copper conductor cable as earth continuity complete in repair all as specified and as directed by EIC.\nNOTE: 2 runs of cable and one run of earth wire and one run of steel conduit shall be measured as one unit. 80 RM
78 75 S&F Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 25A, 250V, 2P+earth complete all as specified and as directed. 4 EACH
79 76 Surface excavation n.exc 30 cm deep and averaging 15 cm and getting out in any type of soil including , levelling, watering and well ramming to the true surface complete all as specified and as directed by Engr in Charge 438 SQM
80 77 S&F Godrej Interio Wardrobe(101.8 cm x 198 cm x 53.5 cm) H1 Metal Almirah  three shelves with wooden rack  (Finish Color - Prince Grey) and grouted to floor all as per specfied and directed. 3 EACH
81 78 S&FGodrej Interio Key box(60 cm x 60cm x 20cm) H1 Metal (Finish Color - Prince Grey) and grouted to wall all as per specfied and directed. 2 EACH
82 79 Cutting of Cast iron pipes 100mm dia and in position for insertion of new tees and branches 80 mm dia complete as directed by Engr-in-Charge. 1 EACH
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail