Municipalities-M has published Development Of Dumpingyard (Drcc Shed By Peb, Compost Yard Shed By Peb, Compound Wall, Roads Etc.) In Shadnagar Municipality Under 14Th Fcg-2017-18. Submission Date for this Tender is 21-09-2020. Shed Construction Tenders in RANGAREDDY Telangana. Bidders can get complete Tender details and download the document.
| S.No | Subwork Name | Specification Number | Quantity | UOM | Rate(INR) | Amount(INR) |
|---|---|---|---|---|---|---|
| 1 | Development of Dumping Yard DRCC Shed | TSSS | 10.00 | 1 No | 829.39 | 8293.90 |
| BLD-ELEC-8-2-5 :Supply , transportation, and fixing of 22W, 2500 lumens, 1200mm length LED batten, housing made with alluminium extrusion, wide operating voltage range from 140V-2720V AC, PF 0.9, IP 20 , Class - C serviceability, THD<20%, CCT: 4000K / 6500K as desired by the department and as per IS specifications, minimum CRI 80,.etc suitable for mounting on wall/surfce/suspendable complete with 5 years warranty. LUMINAIRE MAKE: Phillips model Number BN021LED25S6500PSU GR S1 LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs . | ||||||
| 2 | Development of Dumping Yard DRCC Shed | TSSS | 1.00 | 1 No | 5261.51 | 5261.51 |
| Providing independent earthing for Important equipment with 40mm dia \B\ class 2.5m long G.I pipe and 19mm dia \B\ class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) | ||||||
| 3 | Development of Dumping Yard DRCC Shed | TSSS | 60.00 | Rmt | 80.69 | 4841.40 |
| BLD-ELEC-3.1.4 ; Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete. | ||||||
| 4 | Development of Dumping Yard DRCC Shed | TSSS | 340.00 | Rmt | 29.42 | 10002.80 |
| BLD-ELEC-2-1-5 : Supply and fixing of 16A 3pin / 6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (2 in one) on decolam sheet covered board including earth connection and all labour charges etc., complete on wall. | ||||||
| 5 | Development of Dumping Yard DRCC Shed | TSSS | 4.00 | 1 No | 244.95 | 979.80 |
| BLD-ELEC-2-1-5 : Supply and fixing of 16A 3pin / 6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (2 in one) on decolam sheet covered board including earth connection and all labour charges etc., complete on wall. | ||||||
| 6 | Development of Dumping Yard DRCC Shed | TSSS | 16.00 | 1 No | 141.82 | 2269.12 |
| BLD-ELEC-2-1-4 : Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. | ||||||
| 7 | Development of Dumping Yard DRCC Shed | TSSS | 36.00 | 1 No | 628.52 | 22626.72 |
| BLD-ELEC-2-1-1 : Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings | ||||||
| 8 | Development of Dumping Yard DRCC Shed | TSSS | 302.40 | Rmt | 94.10 | 28455.84 |
| BLD-ELEC-1-3-2 : Supply and Fixing of 25mm dia 1.5mm thick surface P.V.C. pipe (ISI MARK) with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains. | ||||||
| 9 | Development of Dumping Yard DRCC Shed | TSSS | 168.00 | Rmt | 80.75 | 13566.00 |
| BLD-ELEC-1-4-2C : Supply and Fixing of 25mm dia 2mm thick PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. | ||||||
| 10 | Development of Dumping Yard DRCC Shed | TSSS | 600.96 | Rmt | 77.26 | 46430.17 |
| TBSC-T.I-15 : Providing Saw cut joints for freshly laid concrete pavement including all material and labour charges etc,. As directed by the Engineer in charge | ||||||
| 11 | Development of Dumping Yard DRCC Shed | TSSS | 833.85 | sqm | 35.50 | 29601.67 |
| Providing and Spraying Curing compound on the newly laid cement concrete surface at 0.25 ltr/sqm including cost and conveyance of all material and all labour charges etc,. As directed by the Engineer in charge. | ||||||
| 12 | Development of Dumping Yard DRCC Shed | TSSS | 833.85 | sqm | 90.00 | 75046.50 |
| Vaccum drying of freshly laid cement concrete floor using 100% air tight suction mat of suitable size and length, vaccum pump to maintain vaccum pressure 0.7-0.8 atmospheres as per the standard procedure floating with power floater, mechanical trawelling, finishing with sound edges and corners, including hire and operational charges of machinery, labour, fuel etc., complete for finished item of work as directed by Engineer-in-charge of the work. (As per Quotation) | ||||||
| 13 | Development of Dumping Yard DRCC Shed | TSSS | 125.08 | Cum | 6474.50 | 809830.46 |
| RBR-CCPV-5: Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD. | ||||||
| 14 | Development of Dumping Yard DRCC Shed | TSSS | 2209.80 | kg | 66.43 | 146797.01 |
| BLD-CSTN-4-1-(34) ; Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126 | ||||||
| 15 | Development of Dumping Yard DRCC Shed | TSSS | 864.00 | sqm | 3389.40 | 2928441.60 |
| Design, Engineering fabrication erection and Construction of Compost Yard shed of size 18 mts x 48 mts in plan, height at end columns shall be not less than 6.0 mts ( Eaves height) having a minimum roof slope of 1 : 10, end frames of type expandable by Pre Engineered Building proces of approved type design and drawings. Structural framing shall be made with TATA/Jindal/Essar material. The Structure shall be designed to withstand live loads, Wind Loads and Seismic loads (Zone-2) in accordance with relevant BIS codes and other applicable codes i.e., AISC/MBMA/ASTM , weld as per AES D1.1 , wind application as per IS 875 latest codes with the following specifications. The structure shall be of pre engineered building type supported on prefabricated rigid type frame with steel columns , steel beam truss / rafters & z pulins prepainted galvalume sheet roofing including all essential fasternes,fixtures, accessories etc complete. Structural Steel: Main columns ( Minimum 16 nos ) shall be of prefabricated M.S. plates /sections confirming to IS of not less than - Web 300 x 6 mm to 600 mm x 6 mm , Flange 180 x 8 mm, base plate 400 x 200 x 20 mm , splice plate 800 x 200 x 20 mm . Gable end columns ( Minimum 4 nos ) Shall be of prefabricated M.S. plates /sections confirming to IS of not less than - Web 300 x 6 mm , Flange 150 x 6 mm, fixed over base plate 400 x 200 x 20 mm, Truss Rafters/ beams (Minimum 8 nos of span 18 mts ) shall be of prefabricated M.S. plates/ sections of not less than Web 700x 6 mm to 450 mm x 6 mm at center of span , Flange 150 x 6 mm, splice plate 800x 200 x 20 mm / 637 x 200 x 20 mm Purlins :- GI purlins shall be not less than 250 z 24 2.4 mm thick @ 8.13 kg/m confirming to standards minium of 8 nos on either side of Roof. Roofing :- Shall be of 0.50 mm thick TCT prepainted Galvalume of tata / jindal make fixed over z purlins | ||||||
| 16 | Development of Dumping Yard DRCC Shed | TSSS | 29.91 | Cum | 202.89 | 6068.44 |
| BLD-CSTN-2-8 (16) : Filling with Barrowed earth in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) for Compost Shed | ||||||
| 17 | Development of Dumping Yard DRCC Shed | TSSS | 51.60 | Cum | 32.76 | 1690.42 |
| BLD-CSTN-2-9 (17): Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) for Compost Shed | ||||||
| 18 | Development of Dumping Yard DRCC Shed | TSSS | 25.20 | Cum | 3577.28 | 90147.46 |
| BLD-CSTN-6-13-(68) : Construction of RR Masonary in Cement Mortor ( 1:8 ) Prop using hard granite stone including cost & Conveyance of all materials like Cement, Sand , Water, Granite Stones, including labour charges for cutting Stones to required size and shape, mixing of Cement Mortor ,Construction, Scaffolding Charges curing etc., complete for finished item of Work . for Compost Shed | ||||||
| 19 | Development of Dumping Yard DRCC Shed | TSSS | 11.34 | Cum | 11966.85 | 135704.08 |
| BLD-CSTN-3-14-(31) - A : Supply and placing of the M-20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50% river sand 50% rock sand), coarse aggregate, water etc., to site . sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing, centering and suttering charges etc.,complete but excluding seignorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code for PLINTH, PEDESTALS and FOOTINGS. for Compost Shed for Plinth Beam | ||||||
| 20 | Development of Dumping Yard DRCC Shed | TSSS | 7.29 | Cum | 9985.86 | 72796.92 |
| BLD-CSTN-3-14-(31) - A : Supply and placing of the M-20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50% river sand 50% rock sand), coarse aggregate, water etc., to site . sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing, centering and suttering charges etc.,complete but excluding seignorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code for PLINTH, PEDESTALS and FOOTINGS. for Compost Shed for pedastals | ||||||
| 21 | Development of Dumping Yard DRCC Shed | TSSS | 12.53 | Cum | 9384.16 | 117583.52 |
| BLD-CSTN-3-14-(31) - A : Supply and placing of the M-20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50% river sand 50% rock sand), coarse aggregate, water etc., to site . sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing, centering and suttering charges etc.,complete but excluding seignorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code for PLINTH, PEDESTALS and FOOTINGS. for Compost Shed for coloumns footings | ||||||
| 22 | Development of Dumping Yard DRCC Shed | TSSS | 71.00 | Cum | 4001.75 | 284124.25 |
| BLD-CSTN-3-5 (22) -Using Concrete mixture all works up to Plinth Level : Plain Cement concrete nominal mix (1:4:8) prop (Cement : fine aggregate: coarse aggregate ) using 40mm size Hard Granite Machine Crushed Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work.for foundation and under flooring bed. for Compost Shed | ||||||
| 23 | Development of Dumping Yard DRCC Shed | TSSS | 11.68 | Cum | 1238.49 | 14465.56 |
| BLD-CSTN-2-7 - (15) ; Earth work excavation in Hard rock (blasting prohibited)-Upto 3 m depth for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308). for Compost Shed 10% of total qty Footings and Columns and Foundations | ||||||
| 24 | Development of Dumping Yard DRCC Shed | TSSS | 105.08 | Cum | 230.77 | 24249.31 |
| BLD-CSTN-2-2(10) : Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308). 90% of total qty for Footings and Columns and Foundations for Compost Shed | ||||||
| 25 | Development of Dumping Yard DRCC Shed | TSSS | 8.00 | 1 No | 829.39 | 6635.12 |
| BLD-ELEC-8-2-5 :Supply , transportation, and fixing of 22W, 2500 lumens, 1200mm length LED batten, housing made with alluminium extrusion, wide operating voltage range from 140V-2720V AC, PF 0.9, IP 20 , Class - C serviceability, THD<20%, CCT: 4000K / 6500K as desired by the department and as per IS specifications, minimum CRI 80,.etc suitable for mounting on wall/surfce/suspendable complete with 5 years warranty. LUMINAIRE MAKE: Phillips model Number BN021LED25S6500PSU GR S1 LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs . for DRCC Shed 18M | ||||||
| 26 | Development of Dumping Yard DRCC Shed | TSSS | 1.00 | 1 No | 5261.51 | 5261.51 |
| Providing independent earthing for Important equipment with 40mm dia \B\ class 2.5m long G.I pipe and 19mm dia \B\ class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) | ||||||
| 27 | Development of Dumping Yard DRCC Shed | TSSS | 45.00 | Rmt | 80.69 | 3631.05 |
| BLD-ELEC-3.1.4 ; Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete. | ||||||
| 28 | Development of Dumping Yard DRCC Shed | TSSS | 280.00 | Rmt | 29.42 | 8237.60 |
| BLD-ELEC -3.1.2 : Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete. For 6A 3 pin wall plug socket with 6A switch and 16A 3pin / 6A 3pin plug socket | ||||||
| 29 | Development of Dumping Yard DRCC Shed | TSSS | 4.00 | 1 No | 244.95 | 979.80 |
| BLD-ELEC-2-1-5 : Supply and fixing of 16A 3pin / 6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (2 in one) on decolam sheet covered board including earth connection and all labour charges etc., complete on wall. | ||||||
| 30 | Development of Dumping Yard DRCC Shed | TSSS | 12.00 | 1 No | 141.82 | 1701.84 |
| BLD-ELEC-2-1-4 : Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. | ||||||
| 31 | Development of Dumping Yard DRCC Shed | TSSS | 27.00 | 1 No | 628.52 | 16970.04 |
| BLD-ELEC-2-1-1 : Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings | ||||||
| 32 | Development of Dumping Yard DRCC Shed | TSSS | 226.80 | Rmt | 94.10 | 21341.88 |
| BLD-ELEC-1-3-2 : Supply and Fixing of 25mm dia 1.5mm thick surface P.V.C. pipe (ISI MARK) with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains. for Circuite wiring for Switch board to all points | ||||||
| 33 | Development of Dumping Yard DRCC Shed | TSSS | 114.45 | Rmt | 80.75 | 9241.84 |
| BLD-ELEC-1-4-2C : Supply and Fixing of 25mm dia 2mm thick PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. in roof beams along the length in side columns for Circuite wiring for Switch board to all points | ||||||
| 34 | Development of Dumping Yard DRCC Shed | TSSS | 556.96 | Rmt | 77.26 | 43030.73 |
| TBSC-T.I-15 : Providing Saw cut joints for freshly laid concrete pavement including all material and labour charges etc,. As directed by the Engineer in charge for DRCC Shed 18M | ||||||
| 35 | Development of Dumping Yard DRCC Shed | TSSS | 605.83 | sqm | 35.50 | 21506.97 |
| Providing and Spraying Curing compound on the newly laid cement concrete surface at 0.25 ltr/sqm including cost and conveyance of all material and all labour charges etc,. As directed by the Engineer in charge. for DRCC Shed 18M | ||||||
| 36 | Development of Dumping Yard DRCC Shed | TSSS | 605.83 | sqm | 90.00 | 54524.70 |
| Vaccum drying of freshly laid cement concrete floor using 100% air tight suction mat of suitable size and length, vaccum pump to maintain vaccum pressure 0.7-0.8 atmospheres as per the standard procedure floating with power floater, mechanical trawelling, finishing with sound edges and corners, including hire and operational charges of machinery, labour, fuel etc., complete for finished item of work as directed by Engineer-in-charge of the work. (As per Quotation) for DRCC Shed 18M | ||||||
| 37 | Development of Dumping Yard DRCC Shed | TSSS | 90.87 | Cum | 6474.50 | 588337.82 |
| RBR-CCPV-5: Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.for Flooring Bed. for DRCC Shed 18M for Shed area | ||||||
| 38 | Development of Dumping Yard DRCC Shed | TSSS | 1749.90 | kg | 66.43 | 116245.86 |
| BLD-CSTN-4-1-(34) ; Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126 for DRCC Shed 18M for colomns footings and plinth area | ||||||
| 39 | Development of Dumping Yard DRCC Shed | TSSS | 630.00 | sqm | 3658.40 | 2304792.00 |
| Design, Engineering fabrication erection and Construction of DRCC shed of size 18 mts x 35 mts in plan, height at end columns shall be not less than 6.0 mts ( Eaves height) having a minimum roof slope of 1 : 10, end frames of type expandable by Pre Engineered Building proces of approved type design and drawings. Structural framing shall be made with TATA/Jindal/Essar material. The Structure shall be designed to withstand live loads, Wind Loads and Seismic loads (Zone-2) in accordance with relevant BIS codes and other applicable codes i.e., AISC/MBMA/ASTM , weld as per AES D1.1 , wind application as per IS 875 latest codes with the following specifications. The structure shall be of pre engineered building type supported on prefabricated rigid type frame with steel columns , steel beam truss / rafters & z pulins prepainted galvalume sheet roofing including all essential fasternes,fixtures, accessories etc complete. Structural Steel: Main columns ( Minimum 12 nos ) shall be of prefabricated M.S. plates /sections confirming to IS of not less than - Web 300 x 6 mm to 600 mm x 6 mm , Flange 180 x 8 mm, base plate 400 x 200 x 20 mm , splice plate 800 x 200 x 20 mm . Gable end columns ( Minimum 4 nos ) Shall be of prefabricated M.S. plates /sections confirming to IS of not less than - Web 300 x 6 mm , Flange 150 x 6 mm, fixed over base plate 400 x 200 x 20 mm,Truss Rafters/ beams (Minimum 6 nos of span 18 mts ) shall be of prefabricated M.S. plates/ sections of not less than Web 700x 6 mm to 450 mm x 6 mm at center of span , Flange 150 x 6 mm, splice plate 800x 200 x 20 mm /637 x 200 x 20 mm Purlins :- GI purlins shall be not less than 250 z 24 2.4 mm thick @ 8.13 kg/m confirming to standards minium of 8 nos on either side of Roof. Roofing :- Shall be of 0.50 mm thick TCT prepainted Galvalume of tata / jindal make fixed over z purlins for DRCC Shed 18M | ||||||
| 40 | Development of Dumping Yard DRCC Shed | TSSS | 22.55 | Cum | 202.86 | 4574.49 |
| BLD-CSTN-2-8 (16) : Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) for DRCC Shed 18M | ||||||
| 41 | Development of Dumping Yard DRCC Shed | TSSS | 39.60 | Cum | 32.76 | 1297.30 |
| BLD-CSTN-2-9 (17): Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) for DRCC Shed 18M | ||||||
| 42 | Development of Dumping Yard DRCC Shed | TSSS | 16.20 | Cum | 3577.28 | 57951.94 |
| BLD-CSTN-6-13-(68) : Construction of RR Masonary in Cement Mortor ( 1:8 ) Prop using hard granite stone including cost & Conveyance of all materials like Cement, Sand , Water, Granite Stones, including labour charges for cutting Stones to required size and shape, mixing of Cement Mortor ,Construction, Scaffolding Charges curing etc., complete for finished item of Work . for DRCC Shed 18M | ||||||
| 43 | Development of Dumping Yard DRCC Shed | TSSS | 9.11 | Cum | 11966.85 | 109018.00 |
| BLD-CSTN-3-14-(31) - A : Supply and placing of the M-20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50% river sand 50% rock sand), coarse aggregate, water etc., to site . sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing, centering and suttering charges etc.,complete but excluding seignorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code for PLINTH, PEDESTALS and FOOTINGS. for DRCC Shed 18M for Plinth Beam | ||||||
| 44 | Development of Dumping Yard DRCC Shed | TSSS | 5.67 | Cum | 9985.86 | 56619.83 |
| BLD-CSTN-3-14-(31) - A : Supply and placing of the M-20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50% river sand 50% rock sand), coarse aggregate, water etc., to site . sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing, centering and suttering charges etc.,complete but excluding seignorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code for PLINTH, PEDESTALS and FOOTINGS. for DRCC Shed 18M for Pedastals | ||||||
| 45 | Development of Dumping Yard DRCC Shed | TSSS | 9.83 | Cum | 9384.16 | 92246.29 |
| BLD-CSTN-3-14-(31) - A : Supply and placing of the M-20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50% river sand 50% rock sand), coarse aggregate, water etc., to site . sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing, centering and suttering charges etc.,complete but excluding seignorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code for PLINTH, PEDESTALS and FOOTINGS. for DRCC Shed 18M for coloumns and footings | ||||||
| 46 | Development of Dumping Yard DRCC Shed | TSSS | 52.49 | Cum | 4001.75 | 210051.86 |
| BLD-CSTN-3-5 (22) -Using Concrete mixture all works up to Plinth Level : Plain Cement concrete nominal mix (1:4:8) prop (Cement : fine aggregate: coarse aggregate ) using 40mm size Hard Granite Machine Crushed Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work.for foundation and under flooring bed. for DRCC Shed 18M Coloumns and footings | ||||||
| 47 | Development of Dumping Yard DRCC Shed | TSSS | 8.63 | Cum | 1238.49 | 10688.17 |
| BLD-CSTN-2-7 - (15) ; Earth work excavation in Hard rock (blasting prohibited)-Upto 3 m depth for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308). for DRCC Shed 18M 10% of total qty | ||||||
| 48 | Development of Dumping Yard DRCC Shed | TSSS | 77.63 | Cum | 230.77 | 17914.68 |
| BLD-CSTN-2-7 - (15) ; Earth work excavation in Hard rock (blasting prohibited)-Upto 3 m depth for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308). for DRCC Shed 18M 90% of total qty | ||||||
| 49 | Development of Dumping Yard DRCC Shed | TSSS | 546.00 | Rmt | 1145.40 | 625388.40 |
| RBR-TSRA-17 : Fencing With Welded Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979: 2"x2" (50 mm x 50 mm) - 8 Gauge: Providing 1.50 metre high fencing with angle iron posts 50 mm x 50 mm x 6 mm at 3 metre center to center with 0.40 metre embedded in M15 grade cement concrete, corner, end and every 10th post to be strutted, provided with welded steel wire fabric of Hot dipped Galvanised Iron Chain link mesh 8 gauge and fixed to iron posts of 50 mm x 50 mm x 6 mm and bolts etc. complete in all respects. (MORTH Suggestive ) | ||||||
| 50 | Development of Dumping Yard DRCC Shed | TSSS | 62.40 | kg | 66.43 | 4145.23 |
| BLD-CSTN-4-1-(34): Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for footings, pedastals, for columns for Compound wall with Chain link Mesh | ||||||
| 51 | Development of Dumping Yard DRCC Shed | TSSS | 120.00 | kg | 96.74 | 11608.80 |
| Supplying and fixing of MS Gate using 45 x 45 x 6mm MS equal angle alround and 2 Nos 35x35x5mm Equal angles horizontal supports at 0.50m c/c, 2.00mm MS sheet at bottom 0.30m height and 12mm MS square bars Vertically at 125mm centre to centre including fixing with 4 Nos of MS Z holdfasts (2 on each side) duly making cutting brick masonry, fixing and making to original surface neatly and painting gate with one coat of red oxide primer including cost and conveyance of all materials,Locking arrangment, Ornamental pieces etc ,cutting, bending, welding including all operational charges and all labour charges etc., complete for finished item of work. 2 Wings of 60.00 Kg Each ( 2m x1.5m ) for Compound wall with Chain link Mesh | ||||||
| 52 | Development of Dumping Yard DRCC Shed | TSSS | 0.02 | Cum | 4914.71 | 98.29 |
| BLD-CSTN-3-12-(29) Using Concrete mixture up to Plinth Level : Plain Cement concrete (M 15) Nominal Mix 1:2.5:5 (Cement : fine aggregate: coarse aggregate ) using 40, 20 & 10mm size Hard Granite Machine Crushed Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work. Over Gate pillars for Compound wall with Chain link Mesh | ||||||
| 53 | Development of Dumping Yard DRCC Shed | TSSS | 16.77 | Cum | 4914.71 | 82419.69 |
| BLD-CSTN-3-12-(29) Using Concrete mixture up to Plinth Level : Plain Cement concrete (M 15) Nominal Mix 1:2.5:5 (Cement : fine aggregate: coarse aggregate ) using 40, 20 & 10mm size Hard Granite Machine Crushed Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work. for fixing of MS angles for Compound wall with Chain link Mesh | ||||||
| 54 | Development of Dumping Yard DRCC Shed | TSSS | 0.36 | Cum | 12498.82 | 4499.58 |
| BLD-CSTN-3-15- ( 31 ) -B: Supply and placing of the M-20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50% river sand 50% rock sand), coarse aggregate, water etc., to site , sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing, centering and suttering charges etc.,complete but excluding seignorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code for COLUMNS, LINTELS, WATER TANKS, RCC WALLS IN BUILDINGS. Note : 1) The cement content is adopted as 350Kg/cum for estimating purpose only.The exact quantities will be as per mix design. 2) As per mix design, if the cement content is found to be less than 350 Kgs/ Cum the defference in cost shall be deducted. Coloumns for Gate for Compound wall with Chain link Mesh | ||||||
| 55 | Development of Dumping Yard DRCC Shed | TSSS | 0.26 | Cum | 9985.86 | 2596.32 |
| BLD-CSTN-3-14-(31) - A : Supply and placing of the M-20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50% river sand 50% rock sand), coarse aggregate, water etc., to site . sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing, centering and suttering charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code for PLINTH, PEDESTALS and FOOTINGS. Pedastals for Gate pillars for Compound wall with Chain link Mesh | ||||||
| 56 | Development of Dumping Yard DRCC Shed | TSSS | 0.40 | Cum | 9384.16 | 3753.66 |
| BLD-CSTN-3-14-(31) - A : Supply and placing of the M-20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50% river sand 50% rock sand), coarse aggregate, water etc., to site . sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing, centering and suttering charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code for PLINTH, PEDESTALS and FOOTINGS. for Footings for Gate pillars for Compound wall with Chain link Mesh | ||||||
| 57 | Development of Dumping Yard DRCC Shed | TSSS | 0.36 | Cum | 4001.75 | 1440.63 |
| BLD-CSTN-3-5 (22) -Using Concrete mixture all works up to Plinth Level: Plain Cement concrete nominal mix (1:4:8) prop (Cement : fine aggregate: coarse aggregate ) using 40mm size Hard Granite Machine Crushed Metal like cement, sand (50% river sand 50% rock sand), coarse aggregate water etc., to site , labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work.for foundation and under flooring bed. for Compound wall with Chain link Mesh | ||||||
| 58 | Development of Dumping Yard DRCC Shed | TSSS | 0.96 | Cum | 1238.49 | 1188.95 |
| BLD-CSTN-2-7 - (15) ; Earth work excavation in Hard rock (blasting prohibited)-Upto 3 m depth for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308). for Compound wall with Chain link Mesh 10% of total qty For Fencing Around the Dumping yard as per Drawing - Length for Fixing of MS angles for gate Pillars | ||||||
| 59 | Development of Dumping Yard DRCC Shed | TSSS | 18.24 | Cum | 230.77 | 4209.24 |
| BLD-CSTN-2-7 - (15) ; Earth work excavation in Hard rock (blasting prohibited)-Upto 3 m depth for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308). for Compound wall with Chain link Mesh 90% of total qty for Fencing Around the Dumping yard as per Drawing - Length for Fixing of MS angles for gate Pillars |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
